Add DMA handlers to targets

add gtune to naze

src/main/target/CC3D/target.h

@@ -112,9 +112,10 @@
 #define RSSI_ADC_GPIO_PIN           GPIO_Pin_0
 #define RSSI_ADC_CHANNEL            ADC_Channel_8
 
-#define GPS
 #define LED_STRIP
 #define LED_STRIP_TIMER TIM3
+#define WS2811_DMA_TC_FLAG           DMA1_FLAG_TC6
+#define WS2811_DMA_HANDLER_IDENTIFER DMA1_CH6_HANDLER
 
 #define BLACKBOX
 #define TELEMETRY

src/main/target/IRCFUSIONF3/target.h

@@ -145,6 +145,8 @@
 #define WS2811_TIMER_APB2_PERIPHERAL    RCC_APB2Periph_TIM1
 #define WS2811_DMA_CHANNEL              DMA1_Channel2
 #define WS2811_IRQ                      DMA1_Channel2_IRQn
+#define WS2811_DMA_TC_FLAG              DMA1_FLAG_TC2
+#define WS2811_DMA_HANDLER_IDENTIFER    DMA1_CH2_HANDLER
 
 #define BLACKBOX
 #define DISPLAY

src/main/target/MOTOLAB/target.h

@@ -161,6 +161,8 @@
 #define WS2811_TIMER_APB2_PERIPHERAL    RCC_APB2Periph_TIM16
 #define WS2811_DMA_CHANNEL              DMA1_Channel3
 #define WS2811_IRQ                      DMA1_Channel3_IRQn
+#define WS2811_DMA_TC_FLAG              DMA1_FLAG_TC3
+#define WS2811_DMA_HANDLER_IDENTIFER    DMA1_CH3_HANDLER
 #endif
 
 #if 0

src/main/target/NAZE/target.h

@@ -169,16 +169,18 @@
 #define EXTERNAL1_ADC_GPIO_PIN      GPIO_Pin_5
 #define EXTERNAL1_ADC_CHANNEL       ADC_Channel_5
 
-//#define GPS
 
 #define LED_STRIP
 #define LED_STRIP_TIMER TIM3
+#define WS2811_DMA_TC_FLAG           DMA1_FLAG_TC6
+#define WS2811_DMA_HANDLER_IDENTIFER DMA1_CH6_HANDLER
 
+//#define GPS
+#define GTUNE
 #define BLACKBOX
 #define TELEMETRY
 #define SERIAL_RX
 #define USE_SERVOS
-#define GTUNE
 #define USE_CLI
 
 #define SPEKTRUM_BIND
@@ -195,10 +197,10 @@
 #define S1W_RX_GPIO         GPIOA
 #define S1W_RX_PIN          GPIO_Pin_10
 
-// alternative defaults for AlienFlight F1 target
-#ifdef ALIENFLIGHT
+// alternative defaults for AlienWii32 F1 target
+#ifdef ALIENWII32
 #undef TARGET_BOARD_IDENTIFIER
-#define TARGET_BOARD_IDENTIFIER "AWF1" // AlienFlight F1.
+#define TARGET_BOARD_IDENTIFIER "AWF1" // AlienWii32 F1.
 #undef BOARD_HAS_VOLTAGE_DIVIDER
 #define HARDWARE_BIND_PLUG
 

src/main/target/RMDO/target.h

@@ -139,6 +139,8 @@
 #define WS2811_TIMER_APB2_PERIPHERAL    RCC_APB2Periph_TIM1
 #define WS2811_DMA_CHANNEL              DMA1_Channel2
 #define WS2811_IRQ                      DMA1_Channel2_IRQn
+#define WS2811_DMA_TC_FLAG              DMA1_FLAG_TC2
+#define WS2811_DMA_HANDLER_IDENTIFER    DMA1_CH2_HANDLER
 
 #define BLACKBOX
 #define GTUNE

src/main/target/SPARKY/target.h

@@ -142,6 +142,8 @@
 #define WS2811_TIMER_APB2_PERIPHERAL    RCC_APB2Periph_TIM16
 #define WS2811_DMA_CHANNEL              DMA1_Channel3
 #define WS2811_IRQ                      DMA1_Channel3_IRQn
+#define WS2811_DMA_TC_FLAG              DMA1_FLAG_TC3
+#define WS2811_DMA_HANDLER_IDENTIFER    DMA1_CH3_HANDLER
 #endif
 
 #if 0

src/main/target/SPRACINGF3/target.h

@@ -146,6 +146,8 @@
 #define WS2811_TIMER_APB2_PERIPHERAL    RCC_APB2Periph_TIM1
 #define WS2811_DMA_CHANNEL              DMA1_Channel2
 #define WS2811_IRQ                      DMA1_Channel2_IRQn
+#define WS2811_DMA_TC_FLAG              DMA1_FLAG_TC2
+#define WS2811_DMA_HANDLER_IDENTIFER    DMA1_CH2_HANDLER
 
 #define BLACKBOX
 #define DISPLAY