Merge pull request #1134 from borisbstyle/cli_doc
Fix doc yaw_prevention_limit
This commit is contained in:
commit
da5bee283d
|
@ -184,7 +184,7 @@ Re-apply any new defaults as desired.
|
||||||
| `throttle_correction_angle` | The throttle_correction_value will be added to the throttle input. It will be maximal at the throttle_correction_angle and over, null when the copter is leveled and proportional in bewteen. The angle is set with 0.1 deg steps from 1 to 900, ie : 300 = 30.0 deg, 225 = 22.5 deg. | 1 | 900 | 800 | Profile | UINT16 |
|
| `throttle_correction_angle` | The throttle_correction_value will be added to the throttle input. It will be maximal at the throttle_correction_angle and over, null when the copter is leveled and proportional in bewteen. The angle is set with 0.1 deg steps from 1 to 900, ie : 300 = 30.0 deg, 225 = 22.5 deg. | 1 | 900 | 800 | Profile | UINT16 |
|
||||||
| `yaw_control_direction` | | -1 | 1 | 1 | Master | INT8 |
|
| `yaw_control_direction` | | -1 | 1 | 1 | Master | INT8 |
|
||||||
| `yaw_motor_direction` | | -1 | 1 | 1 | Profile | INT8 |
|
| `yaw_motor_direction` | | -1 | 1 | 1 | Profile | INT8 |
|
||||||
| `yaw_jump_prevention_limit` | Prevent yaw jumps during yaw stops. To disable set to 500. | 200 | 80 | 500 | Master | UINT16 |
|
| `yaw_jump_prevention_limit` | Prevent yaw jumps during yaw stops. To disable set to 500. | 80 | 500 | 200 | Master | UINT16 |
|
||||||
| `tri_unarmed_servo` | On tricopter mix only, if this is set to 1, servo will always be correcting regardless of armed state. to disable this, set it to 0. | 0 | 1 | 1 | Profile | INT8 |
|
| `tri_unarmed_servo` | On tricopter mix only, if this is set to 1, servo will always be correcting regardless of armed state. to disable this, set it to 0. | 0 | 1 | 1 | Profile | INT8 |
|
||||||
| `default_rate_profile` | Default = profile number | 0 | 2 | | Profile | UINT8 |
|
| `default_rate_profile` | Default = profile number | 0 | 2 | | Profile | UINT8 |
|
||||||
| `rc_rate` | | 0 | 250 | 90 | Rate Profile | UINT8 |
|
| `rc_rate` | | 0 | 250 | 90 | Rate Profile | UINT8 |
|
||||||
|
|
Loading…
Reference in New Issue