diff --git a/docs/Display.md b/docs/Display.md
index 76f318a23..959a2aaab 100644
--- a/docs/Display.md
+++ b/docs/Display.md
@@ -2,10 +2,24 @@
 
 Cleanflight supports displays to provide information to you about your aircraft and cleanflight state.
 
+When the aircraft is armed the display does not update so flight is not affected.  When disarmed the display
+cycles between various pages.
+
+There is currently no way to change the information on the pages, the list of pages or the time between pages - Code submissions via pull-requests are welcomed!
+
 ##Supported Hardware
 
 At this time no other displays are supported other than the SSD1306 / UG-2864HSWEG01.
 
+## Configuration
+
+From the CLI enable the `DISPLAY` feature
+
+```
+feature DISPLAY
+```
+
+
 ### SSD1306 OLED displays
 
 The SSD1306 display is a 128x64 OLED display that is visible in full sunlight, small and consumes very little current.  
@@ -52,5 +66,4 @@ There are diagrams in the Wiring directory.
 
 Connect +5v, Ground, I2C SDA and I2C SCL from the flight controller to the display.
 
-
-
+On Naze32 rev 5 boards the SDA and SCL pins are underneath the board.