Adding AlienFlightNG Whoop support

Some general AlienFlight target updates

src/main/target/ALIENFLIGHTF3/config.c

@@ -24,6 +24,8 @@
 
 #include "common/axis.h"
 
+#include "config/feature.h"
+
 #include "drivers/light_led.h"
 #include "drivers/pwm_esc_detect.h"
 
@@ -34,8 +36,13 @@
 
 #include "rx/rx.h"
 
+#include "io/serial.h"
+
+#include "sensors/battery.h"
 #include "sensors/gyro.h"
 
+#include "telemetry/telemetry.h"
+
 #include "hardware_revision.h"
 
 #ifdef BRUSHED_MOTORS_PWM_RATE
@@ -43,6 +50,7 @@
 #endif
 
 #define BRUSHED_MOTORS_PWM_RATE 32000           // 32kHz
+#define VBAT_SCALE              20
 
 // alternative defaults settings for AlienFlight targets
 void targetConfiguration(void)
@@ -78,8 +86,18 @@ void targetConfiguration(void)
         pidConfigMutable()->pid_process_denom = 2;
     }
 
-    rxConfigMutable()->spektrum_sat_bind = 5;
-    rxConfigMutable()->spektrum_sat_bind_autoreset = 1;
+    if (!haveFrSkyRX) {
+        rxConfigMutable()->serialrx_provider = SERIALRX_SPEKTRUM2048;
+        rxConfigMutable()->spektrum_sat_bind = 5;
+        rxConfigMutable()->spektrum_sat_bind_autoreset = 1;
+        voltageSensorADCConfigMutable(VOLTAGE_SENSOR_ADC_VBAT)->vbatscale = VBAT_SCALE;
+    } else {
+        rxConfigMutable()->serialrx_provider = SERIALRX_SBUS;
+        rxConfigMutable()->sbus_inversion = 0;
+        serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIALRX_UART)].functionMask = FUNCTION_TELEMETRY_FRSKY | FUNCTION_RX_SERIAL;
+        telemetryConfigMutable()->telemetry_inversion = 0;
+        featureSet(FEATURE_TELEMETRY);
+    }
 
     if (hardwareMotorType == MOTOR_BRUSHED) {
         motorConfigMutable()->dev.motorPwmRate = BRUSHED_MOTORS_PWM_RATE;

src/main/target/ALIENFLIGHTF3/hardware_revision.c

@@ -29,8 +29,10 @@
 #include "hardware_revision.h"
 
 uint8_t hardwareRevision = AFF3_UNKNOWN;
+bool haveFrSkyRX = true;
 
 static IO_t HWDetectPin = IO_NONE;
+static IO_t RXDetectPin = IO_NONE;
 
 void detectHardwareRevision(void)
 {
@@ -38,6 +40,10 @@ void detectHardwareRevision(void)
     IOInit(HWDetectPin, OWNER_SYSTEM, 0);
     IOConfigGPIO(HWDetectPin, IOCFG_IPU);
 
+    RXDetectPin = IOGetByTag(IO_TAG(BEEPER));
+    IOInit(RXDetectPin, OWNER_SYSTEM, 0);
+    IOConfigGPIO(RXDetectPin, IOCFG_IPU);
+
     delayMicroseconds(10);  // allow configuration to settle
 
     // Check hardware revision
@@ -46,6 +52,11 @@ void detectHardwareRevision(void)
     } else {
         hardwareRevision = AFF3_REV_2;
     }
+
+    // Check for integrated OpenSky reciever
+    if (IORead(RXDetectPin)) {
+        haveFrSkyRX = false;
+    }
 }
 
 void updateHardwareRevision(void)

src/main/target/ALIENFLIGHTF3/hardware_revision.h

@@ -23,6 +23,7 @@ typedef enum awf3HardwareRevision_t {
 } awf3HardwareRevision_e;
 
 extern uint8_t hardwareRevision;
+extern bool haveFrSkyRX;
 
 void updateHardwareRevision(void);
 void detectHardwareRevision(void);

src/main/target/ALIENFLIGHTF3/target.h

@@ -111,7 +111,6 @@
 
 #define ADC_INSTANCE            ADC2
 #define VBAT_ADC_PIN            PA4
-#define VBAT_SCALE_DEFAULT      20
 
 // LED strip configuration.
 #define LED_STRIP
@@ -122,7 +121,6 @@
 
 #define DEFAULT_FEATURES        FEATURE_MOTOR_STOP
 #define DEFAULT_RX_FEATURE      FEATURE_RX_SERIAL
-#define SERIALRX_PROVIDER       SERIALRX_SPEKTRUM2048
 #define SERIALRX_UART           SERIAL_PORT_USART2
 #define RX_CHANNELS_TAER
 

src/main/target/ALIENFLIGHTF4/config.c

@@ -64,7 +64,7 @@ void targetConfiguration(void)
     } else {
         rxConfigMutable()->serialrx_provider = SERIALRX_SBUS;
         rxConfigMutable()->sbus_inversion = 0;
-        serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(TELEMETRY_UART)].functionMask = FUNCTION_TELEMETRY_FRSKY;
+        serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIALRX_UART)].functionMask = FUNCTION_TELEMETRY_FRSKY | FUNCTION_RX_SERIAL;
         telemetryConfigMutable()->telemetry_inversion = 0;
         batteryConfigMutable()->voltageMeterSource = VOLTAGE_METER_ADC;
         batteryConfigMutable()->currentMeterSource = CURRENT_METER_ADC;

src/main/target/ALIENFLIGHTF4/target.h

@@ -173,8 +173,6 @@
 #define SERIALRX_UART           SERIAL_PORT_USART2
 #define RX_CHANNELS_TAER
 
-#define TELEMETRY_UART          SERIAL_PORT_USART1
-
 #define USE_SERIAL_4WAY_BLHELI_INTERFACE
 
 #define TARGET_IO_PORTA         0xffff

src/main/target/ALIENFLIGHTNGF7/config.c

@@ -63,7 +63,7 @@ void targetConfiguration(void)
     } else {
         rxConfigMutable()->serialrx_provider = SERIALRX_SBUS;
         rxConfigMutable()->sbus_inversion = 0;
-        serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(TELEMETRY_UART)].functionMask = FUNCTION_TELEMETRY_FRSKY;
+        serialConfigMutable()->portConfigs[findSerialPortIndexByIdentifier(SERIALRX_UART)].functionMask = FUNCTION_TELEMETRY_FRSKY | FUNCTION_RX_SERIAL;
         telemetryConfigMutable()->telemetry_inversion = 0;
         batteryConfigMutable()->voltageMeterSource = VOLTAGE_METER_ADC;
         batteryConfigMutable()->currentMeterSource = CURRENT_METER_ADC;

src/main/target/ALIENFLIGHTNGF7/target.h

@@ -182,8 +182,6 @@
 #define SERIALRX_UART           SERIAL_PORT_USART2
 #define RX_CHANNELS_TAER
 
-#define TELEMETRY_UART          SERIAL_PORT_USART1
-
 #define USE_SERIAL_4WAY_BLHELI_INTERFACE
 
 #define TARGET_IO_PORTA         0xffff