1344 lines
99 KiB
C
1344 lines
99 KiB
C
/*
|
|
* This file is part of Cleanflight and Betaflight.
|
|
*
|
|
* Cleanflight and Betaflight are free software. You can redistribute
|
|
* this software and/or modify this software under the terms of the
|
|
* GNU General Public License as published by the Free Software
|
|
* Foundation, either version 3 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* Cleanflight and Betaflight are distributed in the hope that they
|
|
* will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
* See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this software.
|
|
*
|
|
* If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
|
|
#include "platform.h"
|
|
|
|
#include "build/debug.h"
|
|
|
|
#include "blackbox/blackbox.h"
|
|
|
|
#include "cms/cms.h"
|
|
|
|
#include "common/utils.h"
|
|
#include "common/time.h"
|
|
|
|
#include "drivers/adc.h"
|
|
#include "drivers/bus_i2c.h"
|
|
#include "drivers/bus_spi.h"
|
|
#include "drivers/camera_control.h"
|
|
#include "drivers/light_led.h"
|
|
#include "drivers/pinio.h"
|
|
#include "drivers/vtx_common.h"
|
|
|
|
#include "fc/config.h"
|
|
#include "fc/controlrate_profile.h"
|
|
#include "fc/core.h"
|
|
#include "fc/rc_adjustments.h"
|
|
#include "fc/rc_controls.h"
|
|
|
|
#include "flight/failsafe.h"
|
|
#include "flight/gps_rescue.h"
|
|
#include "flight/imu.h"
|
|
#include "flight/mixer.h"
|
|
#include "flight/pid.h"
|
|
#include "flight/position.h"
|
|
#include "flight/servos.h"
|
|
|
|
#include "interface/settings.h"
|
|
|
|
#include "io/beeper.h"
|
|
#include "io/dashboard.h"
|
|
#include "io/gimbal.h"
|
|
#include "io/gps.h"
|
|
#include "io/ledstrip.h"
|
|
#include "io/osd.h"
|
|
#include "io/vtx.h"
|
|
#include "io/vtx_control.h"
|
|
#include "io/vtx_rtc6705.h"
|
|
|
|
#include "pg/adc.h"
|
|
#include "pg/beeper.h"
|
|
#include "pg/beeper_dev.h"
|
|
#include "pg/bus_i2c.h"
|
|
#include "pg/dashboard.h"
|
|
#include "pg/flash.h"
|
|
#include "pg/gyrodev.h"
|
|
#include "pg/max7456.h"
|
|
#include "pg/mco.h"
|
|
#include "pg/pg.h"
|
|
#include "pg/pg_ids.h"
|
|
#include "pg/pinio.h"
|
|
#include "pg/piniobox.h"
|
|
#include "pg/rx.h"
|
|
#include "pg/rx_spi.h"
|
|
#include "pg/rx_pwm.h"
|
|
#include "pg/sdcard.h"
|
|
#include "pg/vcd.h"
|
|
#include "pg/usb.h"
|
|
#include "pg/sdio.h"
|
|
#include "pg/rcdevice.h"
|
|
|
|
#include "rx/rx.h"
|
|
#include "rx/cc2500_frsky_common.h"
|
|
#include "rx/cc2500_sfhss.h"
|
|
#include "rx/spektrum.h"
|
|
#include "rx/cyrf6936_spektrum.h"
|
|
|
|
#include "sensors/acceleration.h"
|
|
#include "sensors/barometer.h"
|
|
#include "sensors/battery.h"
|
|
#include "sensors/boardalignment.h"
|
|
#include "sensors/compass.h"
|
|
#include "sensors/esc_sensor.h"
|
|
#include "sensors/gyro.h"
|
|
#include "sensors/rangefinder.h"
|
|
#include "sensors/rpm_filter.h"
|
|
|
|
#include "telemetry/frsky_hub.h"
|
|
#include "telemetry/ibus_shared.h"
|
|
#include "telemetry/telemetry.h"
|
|
|
|
// Sensor names (used in lookup tables for *_hardware settings and in status command output)
|
|
// sync with accelerationSensor_e
|
|
const char * const lookupTableAccHardware[] = {
|
|
"AUTO", "NONE", "ADXL345", "MPU6050", "MMA8452", "BMA280", "LSM303DLHC",
|
|
"MPU6000", "MPU6500", "MPU9250", "ICM20601", "ICM20602", "ICM20608G", "ICM20649", "ICM20689",
|
|
"BMI160", "FAKE"
|
|
};
|
|
|
|
// sync with gyroSensor_e
|
|
const char * const lookupTableGyroHardware[] = {
|
|
"AUTO", "NONE", "MPU6050", "L3G4200D", "MPU3050", "L3GD20",
|
|
"MPU6000", "MPU6500", "MPU9250", "ICM20601", "ICM20602", "ICM20608G", "ICM20649", "ICM20689",
|
|
"BMI160", "FAKE"
|
|
};
|
|
|
|
#if defined(USE_SENSOR_NAMES) || defined(USE_BARO)
|
|
// sync with baroSensor_e
|
|
const char * const lookupTableBaroHardware[] = {
|
|
"AUTO", "NONE", "BMP085", "MS5611", "BMP280", "LPS", "QMP6988"
|
|
};
|
|
#endif
|
|
#if defined(USE_SENSOR_NAMES) || defined(USE_MAG)
|
|
// sync with magSensor_e
|
|
const char * const lookupTableMagHardware[] = {
|
|
"AUTO", "NONE", "HMC5883", "AK8975", "AK8963", "QMC5883", "LIS3MDL"
|
|
};
|
|
#endif
|
|
#if defined(USE_SENSOR_NAMES) || defined(USE_RANGEFINDER)
|
|
const char * const lookupTableRangefinderHardware[] = {
|
|
"NONE", "HCSR04", "TFMINI", "TF02"
|
|
};
|
|
#endif
|
|
|
|
static const char * const lookupTableOffOn[] = {
|
|
"OFF", "ON"
|
|
};
|
|
|
|
static const char * const lookupTableCrashRecovery[] = {
|
|
"OFF", "ON" ,"BEEP"
|
|
};
|
|
|
|
static const char * const lookupTableUnit[] = {
|
|
"IMPERIAL", "METRIC"
|
|
};
|
|
|
|
static const char * const lookupTableAlignment[] = {
|
|
"DEFAULT",
|
|
"CW0",
|
|
"CW90",
|
|
"CW180",
|
|
"CW270",
|
|
"CW0FLIP",
|
|
"CW90FLIP",
|
|
"CW180FLIP",
|
|
"CW270FLIP"
|
|
};
|
|
|
|
#ifdef USE_MULTI_GYRO
|
|
static const char * const lookupTableGyro[] = {
|
|
"FIRST", "SECOND", "BOTH"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_GPS
|
|
static const char * const lookupTableGPSProvider[] = {
|
|
"NMEA", "UBLOX", "MSP"
|
|
};
|
|
|
|
static const char * const lookupTableGPSSBASMode[] = {
|
|
"AUTO", "EGNOS", "WAAS", "MSAS", "GAGAN"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_SERVOS
|
|
static const char * const lookupTableGimbalMode[] = {
|
|
"NORMAL", "MIXTILT"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_BLACKBOX
|
|
static const char * const lookupTableBlackboxDevice[] = {
|
|
"NONE", "SPIFLASH", "SDCARD", "SERIAL"
|
|
};
|
|
|
|
static const char * const lookupTableBlackboxMode[] = {
|
|
"NORMAL", "MOTOR_TEST", "ALWAYS"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_SERIAL_RX
|
|
static const char * const lookupTableSerialRX[] = {
|
|
"SPEK1024",
|
|
"SPEK2048",
|
|
"SBUS",
|
|
"SUMD",
|
|
"SUMH",
|
|
"XB-B",
|
|
"XB-B-RJ01",
|
|
"IBUS",
|
|
"JETIEXBUS",
|
|
"CRSF",
|
|
"SRXL",
|
|
"CUSTOM",
|
|
"FPORT",
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_RX_SPI
|
|
// sync with rx_spi_protocol_e
|
|
static const char * const lookupTableRxSpi[] = {
|
|
"V202_250K",
|
|
"V202_1M",
|
|
"SYMA_X",
|
|
"SYMA_X5C",
|
|
"CX10",
|
|
"CX10A",
|
|
"H8_3D",
|
|
"INAV",
|
|
"FRSKY_D",
|
|
"FRSKY_X",
|
|
"FLYSKY",
|
|
"FLYSKY_2A",
|
|
"KN",
|
|
"SFHSS",
|
|
"SPEKTRUM",
|
|
"FRSKY_X_LBT"
|
|
};
|
|
#endif
|
|
|
|
static const char * const lookupTableGyroHardwareLpf[] = {
|
|
"NORMAL",
|
|
"1KHZ_SAMPLING",
|
|
#ifdef USE_GYRO_DLPF_EXPERIMENTAL
|
|
"EXPERIMENTAL"
|
|
#endif
|
|
};
|
|
|
|
#if defined(USE_32K_CAPABLE_GYRO) && defined(USE_GYRO_DLPF_EXPERIMENTAL)
|
|
static const char * const lookupTableGyro32khzHardwareLpf[] = {
|
|
"NORMAL",
|
|
"EXPERIMENTAL"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_CAMERA_CONTROL
|
|
static const char * const lookupTableCameraControlMode[] = {
|
|
"HARDWARE_PWM",
|
|
"SOFTWARE_PWM",
|
|
"DAC"
|
|
};
|
|
#endif
|
|
|
|
static const char * const lookupTablePwmProtocol[] = {
|
|
"OFF", "ONESHOT125", "ONESHOT42", "MULTISHOT", "BRUSHED",
|
|
#ifdef USE_DSHOT
|
|
"DSHOT150", "DSHOT300", "DSHOT600", "DSHOT1200", "PROSHOT1000"
|
|
#endif
|
|
};
|
|
|
|
static const char * const lookupTableRcInterpolation[] = {
|
|
"OFF", "PRESET", "AUTO", "MANUAL"
|
|
};
|
|
|
|
static const char * const lookupTableRcInterpolationChannels[] = {
|
|
"RP", "RPY", "RPYT", "T", "RPT",
|
|
};
|
|
|
|
static const char * const lookupTableLowpassType[] = {
|
|
"PT1",
|
|
"BIQUAD",
|
|
};
|
|
|
|
static const char * const lookupTableDtermLowpassType[] = {
|
|
"PT1",
|
|
"BIQUAD",
|
|
};
|
|
|
|
static const char * const lookupTableAntiGravityMode[] = {
|
|
"SMOOTH",
|
|
"STEP",
|
|
};
|
|
|
|
static const char * const lookupTableFailsafe[] = {
|
|
"AUTO-LAND", "DROP", "GPS-RESCUE"
|
|
};
|
|
|
|
static const char * const lookupTableFailsafeSwitchMode[] = {
|
|
"STAGE1", "KILL", "STAGE2"
|
|
};
|
|
|
|
static const char * const lookupTableBusType[] = {
|
|
"NONE", "I2C", "SPI", "SLAVE",
|
|
#if defined(USE_SPI_GYRO) && defined(USE_I2C_GYRO)
|
|
"GYROAUTO"
|
|
#endif
|
|
};
|
|
|
|
#ifdef USE_MAX7456
|
|
static const char * const lookupTableMax7456Clock[] = {
|
|
"HALF", "DEFAULT", "FULL"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_RX_FRSKY_SPI
|
|
static const char * const lookupTableFrskySpiA1Source[] = {
|
|
"VBAT", "EXTADC", "CONST"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_GYRO_OVERFLOW_CHECK
|
|
static const char * const lookupTableGyroOverflowCheck[] = {
|
|
"OFF", "YAW", "ALL"
|
|
};
|
|
#endif
|
|
|
|
static const char * const lookupTableRatesType[] = {
|
|
"BETAFLIGHT", "RACEFLIGHT"
|
|
};
|
|
|
|
#ifdef USE_OVERCLOCK
|
|
static const char * const lookupOverclock[] = {
|
|
"OFF",
|
|
#if defined(STM32F40_41xxx)
|
|
"192MHZ", "216MHZ", "240MHZ"
|
|
#elif defined(STM32F411xE)
|
|
"108MHZ", "120MHZ"
|
|
#elif defined(STM32F7)
|
|
"240MHZ"
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_LED_STRIP
|
|
static const char * const lookupLedStripFormatRGB[] = {
|
|
"GRB", "RGB"
|
|
};
|
|
#endif
|
|
|
|
static const char * const lookupTableThrottleLimitType[] = {
|
|
"OFF", "SCALE", "CLIP"
|
|
};
|
|
|
|
|
|
#ifdef USE_GPS_RESCUE
|
|
static const char * const lookupTableRescueSanityType[] = {
|
|
"RESCUE_SANITY_OFF", "RESCUE_SANITY_ON", "RESCUE_SANITY_FS_ONLY"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_MAX7456
|
|
static const char * const lookupTableVideoSystem[] = {
|
|
"AUTO", "PAL", "NTSC"
|
|
};
|
|
#endif // USE_MAX7456
|
|
|
|
#if defined(USE_ITERM_RELAX)
|
|
static const char * const lookupTableItermRelax[] = {
|
|
"OFF", "RP", "RPY", "RP_INC", "RPY_INC"
|
|
};
|
|
static const char * const lookupTableItermRelaxType[] = {
|
|
"GYRO", "SETPOINT"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_ACRO_TRAINER
|
|
static const char * const lookupTableAcroTrainerDebug[] = {
|
|
"ROLL", "PITCH"
|
|
};
|
|
#endif // USE_ACRO_TRAINER
|
|
|
|
#ifdef USE_RC_SMOOTHING_FILTER
|
|
static const char * const lookupTableRcSmoothingType[] = {
|
|
"INTERPOLATION", "FILTER"
|
|
};
|
|
static const char * const lookupTableRcSmoothingDebug[] = {
|
|
"ROLL", "PITCH", "YAW", "THROTTLE"
|
|
};
|
|
static const char * const lookupTableRcSmoothingInputType[] = {
|
|
"PT1", "BIQUAD"
|
|
};
|
|
static const char * const lookupTableRcSmoothingDerivativeType[] = {
|
|
"OFF", "PT1", "BIQUAD"
|
|
};
|
|
#endif // USE_RC_SMOOTHING_FILTER
|
|
|
|
#ifdef USE_GYRO_DATA_ANALYSE
|
|
static const char * const lookupTableDynamicFilterRange[] = {
|
|
"HIGH", "MEDIUM", "LOW", "AUTO"
|
|
};
|
|
#endif // USE_GYRO_DATA_ANALYSE
|
|
|
|
#ifdef USE_VTX_COMMON
|
|
static const char * const lookupTableVtxLowPowerDisarm[] = {
|
|
"OFF", "ON", "UNTIL_FIRST_ARM"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_SDCARD
|
|
static const char * const lookupTableSdcardMode[] = {
|
|
"OFF", "SPI", "SDIO"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_LAUNCH_CONTROL
|
|
static const char * const lookupTableLaunchControlMode[] = {
|
|
"NORMAL", "PITCHONLY", "FULL"
|
|
};
|
|
#endif
|
|
|
|
#ifdef USE_TPA_MODE
|
|
static const char * const lookupTableTpaMode[] = {
|
|
"PD", "D"
|
|
};
|
|
#endif
|
|
|
|
#define LOOKUP_TABLE_ENTRY(name) { name, ARRAYLEN(name) }
|
|
|
|
const lookupTableEntry_t lookupTables[] = {
|
|
LOOKUP_TABLE_ENTRY(lookupTableOffOn),
|
|
LOOKUP_TABLE_ENTRY(lookupTableUnit),
|
|
LOOKUP_TABLE_ENTRY(lookupTableAlignment),
|
|
#ifdef USE_GPS
|
|
LOOKUP_TABLE_ENTRY(lookupTableGPSProvider),
|
|
LOOKUP_TABLE_ENTRY(lookupTableGPSSBASMode),
|
|
#ifdef USE_GPS_RESCUE
|
|
LOOKUP_TABLE_ENTRY(lookupTableRescueSanityType),
|
|
#endif
|
|
#endif
|
|
#ifdef USE_BLACKBOX
|
|
LOOKUP_TABLE_ENTRY(lookupTableBlackboxDevice),
|
|
LOOKUP_TABLE_ENTRY(lookupTableBlackboxMode),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(currentMeterSourceNames),
|
|
LOOKUP_TABLE_ENTRY(voltageMeterSourceNames),
|
|
#ifdef USE_SERVOS
|
|
LOOKUP_TABLE_ENTRY(lookupTableGimbalMode),
|
|
#endif
|
|
#ifdef USE_SERIAL_RX
|
|
LOOKUP_TABLE_ENTRY(lookupTableSerialRX),
|
|
#endif
|
|
#ifdef USE_RX_SPI
|
|
LOOKUP_TABLE_ENTRY(lookupTableRxSpi),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(lookupTableGyroHardwareLpf),
|
|
#if defined(USE_32K_CAPABLE_GYRO) && defined(USE_GYRO_DLPF_EXPERIMENTAL)
|
|
LOOKUP_TABLE_ENTRY(lookupTableGyro32khzHardwareLpf),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(lookupTableAccHardware),
|
|
#ifdef USE_BARO
|
|
LOOKUP_TABLE_ENTRY(lookupTableBaroHardware),
|
|
#endif
|
|
#ifdef USE_MAG
|
|
LOOKUP_TABLE_ENTRY(lookupTableMagHardware),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(debugModeNames),
|
|
LOOKUP_TABLE_ENTRY(lookupTablePwmProtocol),
|
|
LOOKUP_TABLE_ENTRY(lookupTableRcInterpolation),
|
|
LOOKUP_TABLE_ENTRY(lookupTableRcInterpolationChannels),
|
|
LOOKUP_TABLE_ENTRY(lookupTableLowpassType),
|
|
LOOKUP_TABLE_ENTRY(lookupTableDtermLowpassType),
|
|
LOOKUP_TABLE_ENTRY(lookupTableAntiGravityMode),
|
|
LOOKUP_TABLE_ENTRY(lookupTableFailsafe),
|
|
LOOKUP_TABLE_ENTRY(lookupTableFailsafeSwitchMode),
|
|
LOOKUP_TABLE_ENTRY(lookupTableCrashRecovery),
|
|
#ifdef USE_CAMERA_CONTROL
|
|
LOOKUP_TABLE_ENTRY(lookupTableCameraControlMode),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(lookupTableBusType),
|
|
#ifdef USE_MAX7456
|
|
LOOKUP_TABLE_ENTRY(lookupTableMax7456Clock),
|
|
#endif
|
|
#ifdef USE_RX_FRSKY_SPI
|
|
LOOKUP_TABLE_ENTRY(lookupTableFrskySpiA1Source),
|
|
#endif
|
|
#ifdef USE_RANGEFINDER
|
|
LOOKUP_TABLE_ENTRY(lookupTableRangefinderHardware),
|
|
#endif
|
|
#ifdef USE_GYRO_OVERFLOW_CHECK
|
|
LOOKUP_TABLE_ENTRY(lookupTableGyroOverflowCheck),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(lookupTableRatesType),
|
|
#ifdef USE_OVERCLOCK
|
|
LOOKUP_TABLE_ENTRY(lookupOverclock),
|
|
#endif
|
|
#ifdef USE_LED_STRIP
|
|
LOOKUP_TABLE_ENTRY(lookupLedStripFormatRGB),
|
|
#endif
|
|
#ifdef USE_MULTI_GYRO
|
|
LOOKUP_TABLE_ENTRY(lookupTableGyro),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(lookupTableThrottleLimitType),
|
|
#ifdef USE_MAX7456
|
|
LOOKUP_TABLE_ENTRY(lookupTableVideoSystem),
|
|
#endif // USE_MAX7456
|
|
#if defined(USE_ITERM_RELAX)
|
|
LOOKUP_TABLE_ENTRY(lookupTableItermRelax),
|
|
LOOKUP_TABLE_ENTRY(lookupTableItermRelaxType),
|
|
#endif
|
|
#ifdef USE_ACRO_TRAINER
|
|
LOOKUP_TABLE_ENTRY(lookupTableAcroTrainerDebug),
|
|
#endif // USE_ACRO_TRAINER
|
|
#ifdef USE_RC_SMOOTHING_FILTER
|
|
LOOKUP_TABLE_ENTRY(lookupTableRcSmoothingType),
|
|
LOOKUP_TABLE_ENTRY(lookupTableRcSmoothingDebug),
|
|
LOOKUP_TABLE_ENTRY(lookupTableRcSmoothingInputType),
|
|
LOOKUP_TABLE_ENTRY(lookupTableRcSmoothingDerivativeType),
|
|
#endif // USE_RC_SMOOTHING_FILTER
|
|
#ifdef USE_GYRO_DATA_ANALYSE
|
|
LOOKUP_TABLE_ENTRY(lookupTableDynamicFilterRange),
|
|
#endif // USE_GYRO_DATA_ANALYSE
|
|
#ifdef USE_VTX_COMMON
|
|
LOOKUP_TABLE_ENTRY(lookupTableVtxLowPowerDisarm),
|
|
#endif
|
|
LOOKUP_TABLE_ENTRY(lookupTableGyroHardware),
|
|
#ifdef USE_SDCARD
|
|
LOOKUP_TABLE_ENTRY(lookupTableSdcardMode),
|
|
#endif
|
|
#ifdef USE_LAUNCH_CONTROL
|
|
LOOKUP_TABLE_ENTRY(lookupTableLaunchControlMode),
|
|
#endif
|
|
#ifdef USE_TPA_MODE
|
|
LOOKUP_TABLE_ENTRY(lookupTableTpaMode),
|
|
#endif
|
|
};
|
|
|
|
#undef LOOKUP_TABLE_ENTRY
|
|
|
|
const clivalue_t valueTable[] = {
|
|
// PG_GYRO_CONFIG
|
|
{ "align_gyro", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_align) },
|
|
{ "gyro_hardware_lpf", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GYRO_HARDWARE_LPF }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_hardware_lpf) },
|
|
#if defined(USE_32K_CAPABLE_GYRO) && defined(USE_GYRO_DLPF_EXPERIMENTAL)
|
|
{ "gyro_32khz_hardware_lpf", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GYRO_32KHZ_HARDWARE_LPF }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_32khz_hardware_lpf) },
|
|
#endif
|
|
#if defined(USE_GYRO_SPI_ICM20649)
|
|
{ "gyro_high_range", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_high_fsr) },
|
|
#endif
|
|
{ "gyro_sync_denom", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 32 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_sync_denom) },
|
|
|
|
{ "gyro_lowpass_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_LOWPASS_TYPE }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_lowpass_type) },
|
|
{ "gyro_lowpass_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_lowpass_hz) },
|
|
|
|
{ "gyro_lowpass2_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_LOWPASS_TYPE }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_lowpass2_type) },
|
|
{ "gyro_lowpass2_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_lowpass2_hz) },
|
|
|
|
{ "gyro_notch1_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_hz_1) },
|
|
{ "gyro_notch1_cutoff", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_cutoff_1) },
|
|
{ "gyro_notch2_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_hz_2) },
|
|
{ "gyro_notch2_cutoff", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_soft_notch_cutoff_2) },
|
|
|
|
{ "gyro_calib_duration", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 50, 3000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyroCalibrationDuration) },
|
|
{ "gyro_calib_noise_limit", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyroMovementCalibrationThreshold) },
|
|
{ "gyro_offset_yaw", VAR_INT16 | MASTER_VALUE, .config.minmax = { -1000, 1000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_offset_yaw) },
|
|
#ifdef USE_GYRO_OVERFLOW_CHECK
|
|
{ "gyro_overflow_detect", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GYRO_OVERFLOW_CHECK }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, checkOverflow) },
|
|
#endif
|
|
#ifdef USE_YAW_SPIN_RECOVERY
|
|
{ "yaw_spin_recovery", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, yaw_spin_recovery) },
|
|
{ "yaw_spin_threshold", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 500, 1950 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, yaw_spin_threshold) },
|
|
#endif
|
|
|
|
#if defined(GYRO_USES_SPI) && defined(USE_32K_CAPABLE_GYRO)
|
|
{ "gyro_use_32khz", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_use_32khz) },
|
|
#endif
|
|
#ifdef USE_MULTI_GYRO
|
|
{ "gyro_to_use", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GYRO }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, gyro_to_use) },
|
|
#endif
|
|
#if defined(USE_GYRO_DATA_ANALYSE)
|
|
{ "dyn_notch_range", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_DYNAMIC_FILTER_RANGE }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, dyn_notch_range) },
|
|
{ "dyn_notch_width_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 20 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, dyn_notch_width_percent) },
|
|
{ "dyn_notch_q", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 1000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, dyn_notch_q) },
|
|
{ "dyn_notch_min_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 1000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, dyn_notch_min_hz) },
|
|
#endif
|
|
#ifdef USE_DYN_LPF
|
|
{ "dyn_lpf_gyro_min_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, dyn_lpf_gyro_min_hz) },
|
|
{ "dyn_lpf_gyro_max_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_GYRO_CONFIG, offsetof(gyroConfig_t, dyn_lpf_gyro_max_hz) },
|
|
{ "dyn_lpf_dterm_min_hz", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dyn_lpf_dterm_min_hz) },
|
|
{ "dyn_lpf_dterm_max_hz", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dyn_lpf_dterm_max_hz) },
|
|
#endif
|
|
|
|
// PG_ACCELEROMETER_CONFIG
|
|
{ "align_acc", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_align) },
|
|
{ "acc_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ACC_HARDWARE }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_hardware) },
|
|
#if defined(USE_GYRO_SPI_ICM20649)
|
|
{ "acc_high_range", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_high_fsr) },
|
|
#endif
|
|
{ "acc_lpf_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 400 }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, acc_lpf_hz) },
|
|
{ "acc_trim_pitch", VAR_INT16 | MASTER_VALUE, .config.minmax = { -300, 300 }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, accelerometerTrims.values.pitch) },
|
|
{ "acc_trim_roll", VAR_INT16 | MASTER_VALUE, .config.minmax = { -300, 300 }, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, accelerometerTrims.values.roll) },
|
|
{ "acc_calibration", VAR_INT16 | MASTER_VALUE | MODE_ARRAY, .config.array.length = XYZ_AXIS_COUNT, PG_ACCELEROMETER_CONFIG, offsetof(accelerometerConfig_t, accZero.raw) },
|
|
|
|
// PG_COMPASS_CONFIG
|
|
#ifdef USE_MAG
|
|
{ "align_mag", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_align) },
|
|
{ "mag_bustype", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BUS_TYPE }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_bustype) },
|
|
{ "mag_i2c_device", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2CDEV_COUNT }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_i2c_device) },
|
|
{ "mag_i2c_address", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2C_ADDR7_MAX }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_i2c_address) },
|
|
{ "mag_spi_device", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_spi_device) },
|
|
{ "mag_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_MAG_HARDWARE }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_hardware) },
|
|
{ "mag_declination", VAR_INT16 | MASTER_VALUE, .config.minmax = { -18000, 18000 }, PG_COMPASS_CONFIG, offsetof(compassConfig_t, mag_declination) },
|
|
{ "mag_calibration", VAR_INT16 | MASTER_VALUE | MODE_ARRAY, .config.array.length = XYZ_AXIS_COUNT, PG_COMPASS_CONFIG, offsetof(compassConfig_t, magZero.raw) },
|
|
#endif
|
|
|
|
// PG_BAROMETER_CONFIG
|
|
#ifdef USE_BARO
|
|
{ "baro_bustype", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BUS_TYPE }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_bustype) },
|
|
{ "baro_spi_device", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 5 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_spi_device) },
|
|
{ "baro_i2c_device", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 5 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_i2c_device) },
|
|
{ "baro_i2c_address", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2C_ADDR7_MAX }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_i2c_address) },
|
|
{ "baro_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BARO_HARDWARE }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_hardware) },
|
|
{ "baro_tab_size", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, BARO_SAMPLE_COUNT_MAX }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_sample_count) },
|
|
{ "baro_noise_lpf", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_noise_lpf) },
|
|
{ "baro_cf_vel", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_cf_vel) },
|
|
{ "baro_cf_alt", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 1000 }, PG_BAROMETER_CONFIG, offsetof(barometerConfig_t, baro_cf_alt) },
|
|
#endif
|
|
|
|
// PG_RX_CONFIG
|
|
{ "mid_rc", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1200, 1700 }, PG_RX_CONFIG, offsetof(rxConfig_t, midrc) },
|
|
{ "min_check", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, mincheck) },
|
|
{ "max_check", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, maxcheck) },
|
|
{ "rssi_channel", VAR_INT8 | MASTER_VALUE, .config.minmax = { 0, MAX_SUPPORTED_RC_CHANNEL_COUNT }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_channel) },
|
|
{ "rssi_src_frame_errors", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_src_frame_errors) },
|
|
{ "rssi_scale", VAR_UINT8 | MASTER_VALUE, .config.minmax = { RSSI_SCALE_MIN, RSSI_SCALE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_scale) },
|
|
{ "rssi_offset", VAR_INT8 | MASTER_VALUE, .config.minmax = { -100, 100 }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_offset) },
|
|
{ "rssi_invert", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, rssi_invert) },
|
|
{ "rc_interp", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_INTERPOLATION }, PG_RX_CONFIG, offsetof(rxConfig_t, rcInterpolation) },
|
|
{ "rc_interp_ch", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_INTERPOLATION_CHANNELS }, PG_RX_CONFIG, offsetof(rxConfig_t, rcInterpolationChannels) },
|
|
{ "rc_interp_int", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 50 }, PG_RX_CONFIG, offsetof(rxConfig_t, rcInterpolationInterval) },
|
|
|
|
#ifdef USE_RC_SMOOTHING_FILTER
|
|
{ "rc_smoothing_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_SMOOTHING_TYPE }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_type) },
|
|
{ "rc_smoothing_input_hz", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, UINT8_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_input_cutoff) },
|
|
{ "rc_smoothing_derivative_hz", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, UINT8_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_derivative_cutoff) },
|
|
{ "rc_smoothing_debug_axis", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_SMOOTHING_DEBUG }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_debug_axis) },
|
|
{ "rc_smoothing_input_type", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_SMOOTHING_INPUT_TYPE }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_input_type) },
|
|
{ "rc_smoothing_derivative_type",VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RC_SMOOTHING_DERIVATIVE_TYPE }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_derivative_type) },
|
|
{ "rc_smoothing_auto_smoothness",VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 50 }, PG_RX_CONFIG, offsetof(rxConfig_t, rc_smoothing_auto_factor) },
|
|
#endif // USE_RC_SMOOTHING_FILTER
|
|
|
|
{ "fpv_mix_degrees", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 90 }, PG_RX_CONFIG, offsetof(rxConfig_t, fpvCamAngleDegrees) },
|
|
{ "max_aux_channels", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, MAX_AUX_CHANNEL_COUNT }, PG_RX_CONFIG, offsetof(rxConfig_t, max_aux_channel) },
|
|
#ifdef USE_SERIAL_RX
|
|
{ "serialrx_provider", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_SERIAL_RX }, PG_RX_CONFIG, offsetof(rxConfig_t, serialrx_provider) },
|
|
{ "serialrx_inverted", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, serialrx_inverted) },
|
|
#endif
|
|
#ifdef USE_SPEKTRUM_BIND
|
|
{ "spektrum_sat_bind", VAR_UINT8 | MASTER_VALUE, .config.minmax = { SPEKTRUM_SAT_BIND_DISABLED, SPEKTRUM_SAT_BIND_MAX}, PG_RX_CONFIG, offsetof(rxConfig_t, spektrum_sat_bind) },
|
|
{ "spektrum_sat_bind_autoreset",VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, spektrum_sat_bind_autoreset) },
|
|
#endif
|
|
{ "airmode_start_throttle_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_RX_CONFIG, offsetof(rxConfig_t, airModeActivateThreshold) },
|
|
{ "rx_min_usec", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rx_min_usec) },
|
|
{ "rx_max_usec", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_RX_CONFIG, offsetof(rxConfig_t, rx_max_usec) },
|
|
{ "serialrx_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_CONFIG, offsetof(rxConfig_t, halfDuplex) },
|
|
#ifdef USE_RX_SPI
|
|
{ "rx_spi_protocol", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RX_SPI }, PG_RX_SPI_CONFIG, offsetof(rxSpiConfig_t, rx_spi_protocol) },
|
|
{ "rx_spi_bus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_RX_SPI_CONFIG, offsetof(rxSpiConfig_t, spibus) },
|
|
{ "rx_spi_led_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_SPI_CONFIG, offsetof(rxSpiConfig_t, ledInversion) },
|
|
#endif
|
|
|
|
// PG_ADC_CONFIG
|
|
#if defined(USE_ADC)
|
|
{ "adc_device", VAR_INT8 | MASTER_VALUE, .config.minmax = { 0, ADCDEV_COUNT }, PG_ADC_CONFIG, offsetof(adcConfig_t, device) },
|
|
{ "adc_vrefint_calibration", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_ADC_CONFIG, offsetof(adcConfig_t, vrefIntCalibration) },
|
|
{ "adc_tempsensor_calibration30", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_ADC_CONFIG, offsetof(adcConfig_t, tempSensorCalibration1) },
|
|
{ "adc_tempsensor_calibration110", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_ADC_CONFIG, offsetof(adcConfig_t, tempSensorCalibration2) },
|
|
#endif
|
|
|
|
// PG_PWM_CONFIG
|
|
#if defined(USE_PWM)
|
|
{ "input_filtering_mode", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PWM_CONFIG, offsetof(pwmConfig_t, inputFilteringMode) },
|
|
#endif
|
|
|
|
// PG_BLACKBOX_CONFIG
|
|
#ifdef USE_BLACKBOX
|
|
{ "blackbox_p_ratio", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, INT16_MAX }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, p_ratio) },
|
|
{ "blackbox_device", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BLACKBOX_DEVICE }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, device) },
|
|
{ "blackbox_record_acc", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, record_acc) },
|
|
{ "blackbox_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BLACKBOX_MODE }, PG_BLACKBOX_CONFIG, offsetof(blackboxConfig_t, mode) },
|
|
#endif
|
|
|
|
// PG_MOTOR_CONFIG
|
|
{ "min_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, minthrottle) },
|
|
{ "max_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, maxthrottle) },
|
|
{ "min_command", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, mincommand) },
|
|
#ifdef USE_DSHOT
|
|
{ "dshot_idle_value", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, digitalIdleOffsetValue) },
|
|
#ifdef USE_DSHOT_DMAR
|
|
{ "dshot_burst", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.useBurstDshot) },
|
|
#ifdef USE_DSHOT_TELEMETRY
|
|
{ "dshot_bidir", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.useDshotTelemetry) },
|
|
#endif
|
|
#endif
|
|
#endif
|
|
{ "use_unsynced_pwm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.useUnsyncedPwm) },
|
|
{ "motor_pwm_protocol", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_MOTOR_PWM_PROTOCOL }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.motorPwmProtocol) },
|
|
{ "motor_pwm_rate", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 200, 32000 }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.motorPwmRate) },
|
|
{ "motor_pwm_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, dev.motorPwmInversion) },
|
|
{ "motor_poles", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 4, UINT8_MAX }, PG_MOTOR_CONFIG, offsetof(motorConfig_t, motorPoleCount) },
|
|
|
|
// PG_THROTTLE_CORRECTION_CONFIG
|
|
{ "thr_corr_value", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 150 }, PG_THROTTLE_CORRECTION_CONFIG, offsetof(throttleCorrectionConfig_t, throttle_correction_value) },
|
|
{ "thr_corr_angle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 900 }, PG_THROTTLE_CORRECTION_CONFIG, offsetof(throttleCorrectionConfig_t, throttle_correction_angle) },
|
|
|
|
// PG_FAILSAFE_CONFIG
|
|
{ "failsafe_delay", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_delay) },
|
|
{ "failsafe_off_delay", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_off_delay) },
|
|
{ "failsafe_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_throttle) },
|
|
{ "failsafe_switch_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_FAILSAFE_SWITCH_MODE }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_switch_mode) },
|
|
{ "failsafe_throttle_low_delay",VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 300 }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_throttle_low_delay) },
|
|
{ "failsafe_procedure", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_FAILSAFE }, PG_FAILSAFE_CONFIG, offsetof(failsafeConfig_t, failsafe_procedure) },
|
|
|
|
// PG_BOARDALIGNMENT_CONFIG
|
|
{ "align_board_roll", VAR_INT16 | MASTER_VALUE, .config.minmax = { -180, 360 }, PG_BOARD_ALIGNMENT, offsetof(boardAlignment_t, rollDegrees) },
|
|
{ "align_board_pitch", VAR_INT16 | MASTER_VALUE, .config.minmax = { -180, 360 }, PG_BOARD_ALIGNMENT, offsetof(boardAlignment_t, pitchDegrees) },
|
|
{ "align_board_yaw", VAR_INT16 | MASTER_VALUE, .config.minmax = { -180, 360 }, PG_BOARD_ALIGNMENT, offsetof(boardAlignment_t, yawDegrees) },
|
|
|
|
// PG_GIMBAL_CONFIG
|
|
#ifdef USE_SERVOS
|
|
{ "gimbal_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GIMBAL_MODE }, PG_GIMBAL_CONFIG, offsetof(gimbalConfig_t, mode) },
|
|
#endif
|
|
|
|
// PG_BATTERY_CONFIG
|
|
{ "bat_capacity", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 20000 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, batteryCapacity) },
|
|
{ "vbat_max_cell_voltage", VAR_UINT16 | MASTER_VALUE, .config.minmax = { VBAT_CELL_VOTAGE_RANGE_MIN, VBAT_CELL_VOTAGE_RANGE_MAX }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatmaxcellvoltage) },
|
|
{ "vbat_full_cell_voltage", VAR_UINT16 | MASTER_VALUE, .config.minmax = { VBAT_CELL_VOTAGE_RANGE_MIN, VBAT_CELL_VOTAGE_RANGE_MAX }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatfullcellvoltage) },
|
|
{ "vbat_min_cell_voltage", VAR_UINT16 | MASTER_VALUE, .config.minmax = { VBAT_CELL_VOTAGE_RANGE_MIN, VBAT_CELL_VOTAGE_RANGE_MAX }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatmincellvoltage) },
|
|
{ "vbat_warning_cell_voltage", VAR_UINT16 | MASTER_VALUE, .config.minmax = { VBAT_CELL_VOTAGE_RANGE_MIN, VBAT_CELL_VOTAGE_RANGE_MAX }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatwarningcellvoltage) },
|
|
{ "vbat_hysteresis", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 250 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbathysteresis) },
|
|
{ "current_meter", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_CURRENT_METER }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, currentMeterSource) },
|
|
{ "battery_meter", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_VOLTAGE_METER }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, voltageMeterSource) },
|
|
{ "vbat_detect_cell_voltage", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 2000 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, vbatnotpresentcellvoltage) },
|
|
{ "use_vbat_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, useVBatAlerts) },
|
|
{ "use_cbat_alerts", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, useConsumptionAlerts) },
|
|
{ "cbat_alert_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, consumptionWarningPercentage) },
|
|
{ "vbat_cutoff_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, lvcPercentage) },
|
|
{ "force_battery_cell_count", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 24 }, PG_BATTERY_CONFIG, offsetof(batteryConfig_t, forceBatteryCellCount) },
|
|
|
|
// PG_VOLTAGE_SENSOR_ADC_CONFIG
|
|
{ "vbat_scale", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VBAT_SCALE_MIN, VBAT_SCALE_MAX }, PG_VOLTAGE_SENSOR_ADC_CONFIG, offsetof(voltageSensorADCConfig_t, vbatscale) },
|
|
{ "vbat_divider", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VBAT_DIVIDER_MIN, VBAT_DIVIDER_MAX }, PG_VOLTAGE_SENSOR_ADC_CONFIG, offsetof(voltageSensorADCConfig_t, vbatresdivval) },
|
|
{ "vbat_multiplier", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VBAT_MULTIPLIER_MIN, VBAT_MULTIPLIER_MAX }, PG_VOLTAGE_SENSOR_ADC_CONFIG, offsetof(voltageSensorADCConfig_t, vbatresdivmultiplier) },
|
|
|
|
// PG_CURRENT_SENSOR_ADC_CONFIG
|
|
{ "ibata_scale", VAR_INT16 | MASTER_VALUE, .config.minmax = { -16000, 16000 }, PG_CURRENT_SENSOR_ADC_CONFIG, offsetof(currentSensorADCConfig_t, scale) },
|
|
{ "ibata_offset", VAR_INT16 | MASTER_VALUE, .config.minmax = { -32000, 32000 }, PG_CURRENT_SENSOR_ADC_CONFIG, offsetof(currentSensorADCConfig_t, offset) },
|
|
// PG_CURRENT_SENSOR_ADC_CONFIG
|
|
#ifdef USE_VIRTUAL_CURRENT_METER
|
|
{ "ibatv_scale", VAR_INT16 | MASTER_VALUE, .config.minmax = { -16000, 16000 }, PG_CURRENT_SENSOR_VIRTUAL_CONFIG, offsetof(currentSensorVirtualConfig_t, scale) },
|
|
{ "ibatv_offset", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_CURRENT_SENSOR_VIRTUAL_CONFIG, offsetof(currentSensorVirtualConfig_t, offset) },
|
|
#endif
|
|
|
|
#ifdef USE_BEEPER
|
|
// PG_BEEPER_DEV_CONFIG
|
|
{ "beeper_inversion", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BEEPER_DEV_CONFIG, offsetof(beeperDevConfig_t, isInverted) },
|
|
{ "beeper_od", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_BEEPER_DEV_CONFIG, offsetof(beeperDevConfig_t, isOpenDrain) },
|
|
{ "beeper_frequency", VAR_INT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_BEEPER_DEV_CONFIG, offsetof(beeperDevConfig_t, frequency) },
|
|
|
|
// PG_BEEPER_CONFIG
|
|
#ifdef USE_DSHOT
|
|
{ "beeper_dshot_beacon_tone", VAR_UINT8 | MASTER_VALUE, .config.minmax = {1, DSHOT_CMD_BEACON5 }, PG_BEEPER_CONFIG, offsetof(beeperConfig_t, dshotBeaconTone) },
|
|
#endif
|
|
#endif // USE_BEEPER
|
|
|
|
// PG_MIXER_CONFIG
|
|
{ "yaw_motors_reversed", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MIXER_CONFIG, offsetof(mixerConfig_t, yaw_motors_reversed) },
|
|
{ "crashflip_motor_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_MIXER_CONFIG, offsetof(mixerConfig_t, crashflip_motor_percent) },
|
|
|
|
// PG_MOTOR_3D_CONFIG
|
|
{ "3d_deadband_low", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_RANGE_MIDDLE }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, deadband3d_low) },
|
|
{ "3d_deadband_high", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_MIDDLE, PWM_PULSE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, deadband3d_high) },
|
|
{ "3d_neutral", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, neutral3d) },
|
|
{ "3d_deadband_throttle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 100 }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, deadband3d_throttle) },
|
|
{ "3d_limit_low", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_RANGE_MIDDLE }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, limit3d_low) },
|
|
{ "3d_limit_high", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_RANGE_MIDDLE, PWM_PULSE_MAX }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, limit3d_high) },
|
|
{ "3d_switched_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MOTOR_3D_CONFIG, offsetof(flight3DConfig_t, switched_mode3d) },
|
|
|
|
// PG_SERVO_CONFIG
|
|
#ifdef USE_SERVOS
|
|
{ "servo_center_pulse", VAR_UINT16 | MASTER_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_SERVO_CONFIG, offsetof(servoConfig_t, dev.servoCenterPulse) },
|
|
{ "servo_pwm_rate", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 50, 498 }, PG_SERVO_CONFIG, offsetof(servoConfig_t, dev.servoPwmRate) },
|
|
{ "servo_lowpass_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 400}, PG_SERVO_CONFIG, offsetof(servoConfig_t, servo_lowpass_freq) },
|
|
{ "tri_unarmed_servo", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SERVO_CONFIG, offsetof(servoConfig_t, tri_unarmed_servo) },
|
|
{ "channel_forwarding_start", VAR_UINT8 | MASTER_VALUE, .config.minmax = { AUX1, MAX_SUPPORTED_RC_CHANNEL_COUNT }, PG_SERVO_CONFIG, offsetof(servoConfig_t, channelForwardingStartChannel) },
|
|
#endif
|
|
|
|
// PG_CONTROLRATE_PROFILES
|
|
{ "thr_mid", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, thrMid8) },
|
|
{ "thr_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, thrExpo8) },
|
|
{ "rates_type", VAR_UINT8 | PROFILE_RATE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RATES_TYPE }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates_type) },
|
|
{ "roll_rc_rate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 1, CONTROL_RATE_CONFIG_RC_RATES_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcRates[FD_ROLL]) },
|
|
{ "pitch_rc_rate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 1, CONTROL_RATE_CONFIG_RC_RATES_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcRates[FD_PITCH]) },
|
|
{ "yaw_rc_rate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 1, CONTROL_RATE_CONFIG_RC_RATES_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcRates[FD_YAW]) },
|
|
{ "roll_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_RC_EXPO_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcExpo[FD_ROLL]) },
|
|
{ "pitch_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_RC_EXPO_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcExpo[FD_PITCH]) },
|
|
{ "yaw_expo", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_RC_EXPO_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rcExpo[FD_YAW]) },
|
|
{ "roll_srate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_RATE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates[FD_ROLL]) },
|
|
{ "pitch_srate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_RATE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates[FD_PITCH]) },
|
|
{ "yaw_srate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_RATE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rates[FD_YAW]) },
|
|
{ "tpa_rate", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 0, CONTROL_RATE_CONFIG_TPA_MAX}, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, dynThrPID) },
|
|
{ "tpa_breakpoint", VAR_UINT16 | PROFILE_RATE_VALUE, .config.minmax = { PWM_PULSE_MIN, PWM_PULSE_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, tpa_breakpoint) },
|
|
#ifdef USE_TPA_MODE
|
|
{ "tpa_mode", VAR_UINT8 | PROFILE_RATE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_TPA_MODE }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, tpaMode) },
|
|
#endif
|
|
{ "throttle_limit_type", VAR_UINT8 | PROFILE_RATE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_THROTTLE_LIMIT_TYPE }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, throttle_limit_type) },
|
|
{ "throttle_limit_percent", VAR_UINT8 | PROFILE_RATE_VALUE, .config.minmax = { 25, 100 }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, throttle_limit_percent) },
|
|
{ "roll_rate_limit", VAR_UINT16 | PROFILE_RATE_VALUE, .config.minmax = { CONTROL_RATE_CONFIG_RATE_LIMIT_MIN, CONTROL_RATE_CONFIG_RATE_LIMIT_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rate_limit[FD_ROLL]) },
|
|
{ "pitch_rate_limit", VAR_UINT16 | PROFILE_RATE_VALUE, .config.minmax = { CONTROL_RATE_CONFIG_RATE_LIMIT_MIN, CONTROL_RATE_CONFIG_RATE_LIMIT_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rate_limit[FD_PITCH]) },
|
|
{ "yaw_rate_limit", VAR_UINT16 | PROFILE_RATE_VALUE, .config.minmax = { CONTROL_RATE_CONFIG_RATE_LIMIT_MIN, CONTROL_RATE_CONFIG_RATE_LIMIT_MAX }, PG_CONTROL_RATE_PROFILES, offsetof(controlRateConfig_t, rate_limit[FD_YAW]) },
|
|
|
|
// PG_SERIAL_CONFIG
|
|
{ "reboot_character", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 48, 126 }, PG_SERIAL_CONFIG, offsetof(serialConfig_t, reboot_character) },
|
|
{ "serial_update_rate_hz", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 100, 2000 }, PG_SERIAL_CONFIG, offsetof(serialConfig_t, serial_update_rate_hz) },
|
|
|
|
// PG_IMU_CONFIG
|
|
{ "imu_dcm_kp", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 32000 }, PG_IMU_CONFIG, offsetof(imuConfig_t, dcm_kp) },
|
|
{ "imu_dcm_ki", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 32000 }, PG_IMU_CONFIG, offsetof(imuConfig_t, dcm_ki) },
|
|
{ "small_angle", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 180 }, PG_IMU_CONFIG, offsetof(imuConfig_t, small_angle) },
|
|
|
|
// PG_ARMING_CONFIG
|
|
{ "auto_disarm_delay", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 60 }, PG_ARMING_CONFIG, offsetof(armingConfig_t, auto_disarm_delay) },
|
|
{ "gyro_cal_on_first_arm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_ARMING_CONFIG, offsetof(armingConfig_t, gyro_cal_on_first_arm) },
|
|
|
|
|
|
// PG_GPS_CONFIG
|
|
#ifdef USE_GPS
|
|
{ "gps_provider", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GPS_PROVIDER }, PG_GPS_CONFIG, offsetof(gpsConfig_t, provider) },
|
|
{ "gps_sbas_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GPS_SBAS_MODE }, PG_GPS_CONFIG, offsetof(gpsConfig_t, sbasMode) },
|
|
{ "gps_auto_config", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_CONFIG, offsetof(gpsConfig_t, autoConfig) },
|
|
{ "gps_auto_baud", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_CONFIG, offsetof(gpsConfig_t, autoBaud) },
|
|
{ "gps_ublox_use_galileo", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_CONFIG, offsetof(gpsConfig_t, gps_ublox_use_galileo) },
|
|
{ "gps_set_home_point_once", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_CONFIG, offsetof(gpsConfig_t, gps_set_home_point_once) },
|
|
|
|
#ifdef USE_GPS_RESCUE
|
|
// PG_GPS_RESCUE
|
|
{ "gps_rescue_angle", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 200 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, angle) },
|
|
{ "gps_rescue_initial_alt", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 20, 100 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, initialAltitudeM) },
|
|
{ "gps_rescue_descent_dist", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 30, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, descentDistanceM) },
|
|
{ "gps_rescue_ground_speed", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 30, 3000 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, rescueGroundspeed) },
|
|
{ "gps_rescue_throttle_p", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, throttleP) },
|
|
{ "gps_rescue_throttle_i", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, throttleI) },
|
|
{ "gps_rescue_throttle_d", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, throttleD) },
|
|
{ "gps_rescue_velocity_p", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, velP) },
|
|
{ "gps_rescue_velocity_i", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, velI) },
|
|
{ "gps_rescue_velocity_d", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, velD) },
|
|
{ "gps_rescue_yaw_p", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 500 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, yawP) },
|
|
|
|
{ "gps_rescue_throttle_min", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1000, 2000 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, throttleMin) },
|
|
{ "gps_rescue_throttle_max", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1000, 2000 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, throttleMax) },
|
|
{ "gps_rescue_throttle_hover", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1000, 2000 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, throttleHover) },
|
|
{ "gps_rescue_sanity_checks", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_GPS_RESCUE }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, sanityChecks) },
|
|
{ "gps_rescue_min_sats", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 5, 50 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, minSats) },
|
|
{ "gps_rescue_min_dth", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 50, 1000 }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, minRescueDth) },
|
|
{ "gps_rescue_allow_arming_without_fix", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, allowArmingWithoutFix) },
|
|
{ "gps_rescue_use_mag", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_GPS_RESCUE, offsetof(gpsRescueConfig_t, useMag) },
|
|
#endif
|
|
#endif
|
|
|
|
{ "deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 32 }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, deadband) },
|
|
{ "yaw_deadband", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, yaw_deadband) },
|
|
{ "yaw_control_reversed", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RC_CONTROLS_CONFIG, offsetof(rcControlsConfig_t, yaw_control_reversed) },
|
|
|
|
// PG_PID_CONFIG
|
|
{ "pid_process_denom", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, MAX_PID_PROCESS_DENOM }, PG_PID_CONFIG, offsetof(pidConfig_t, pid_process_denom) },
|
|
#ifdef USE_RUNAWAY_TAKEOFF
|
|
{ "runaway_takeoff_prevention", VAR_UINT8 | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_CONFIG, offsetof(pidConfig_t, runaway_takeoff_prevention) }, // enables/disables runaway takeoff prevention
|
|
{ "runaway_takeoff_deactivate_delay", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 100, 1000 }, PG_PID_CONFIG, offsetof(pidConfig_t, runaway_takeoff_deactivate_delay) }, // deactivate time in ms
|
|
{ "runaway_takeoff_deactivate_throttle_percent", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_PID_CONFIG, offsetof(pidConfig_t, runaway_takeoff_deactivate_throttle) }, // minimum throttle percentage during deactivation phase
|
|
#endif
|
|
|
|
// PG_PID_PROFILE
|
|
{ "dterm_lowpass_type", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_DTERM_LOWPASS_TYPE }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_filter_type) },
|
|
{ "dterm_lowpass_hz", VAR_INT16 | PROFILE_VALUE, .config.minmax = { 0, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_lowpass_hz) },
|
|
{ "dterm_lowpass2_type", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_DTERM_LOWPASS_TYPE }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_filter2_type) },
|
|
{ "dterm_lowpass2_hz", VAR_INT16 | PROFILE_VALUE, .config.minmax = { 0, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_lowpass2_hz) },
|
|
{ "dterm_notch_hz", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_notch_hz) },
|
|
{ "dterm_notch_cutoff", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 16000 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_notch_cutoff) },
|
|
{ "vbat_pid_gain", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, vbatPidCompensation) },
|
|
{ "pid_at_min_throttle", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, pidAtMinThrottle) },
|
|
{ "anti_gravity_mode", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ANTI_GRAVITY_MODE }, PG_PID_PROFILE, offsetof(pidProfile_t, antiGravityMode) },
|
|
{ "anti_gravity_threshold", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 20, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermThrottleThreshold) },
|
|
{ "anti_gravity_gain", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 1000, 30000 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermAcceleratorGain) },
|
|
{ "feedforward_transition", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, feedForwardTransition) },
|
|
{ "acc_limit_yaw", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, yawRateAccelLimit) },
|
|
{ "acc_limit", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, rateAccelLimit) },
|
|
{ "crash_dthreshold", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_dthreshold) },
|
|
{ "crash_gthreshold", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_gthreshold) },
|
|
{ "crash_setpoint_threshold", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_setpoint_threshold) },
|
|
{ "crash_time", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 5000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_time) },
|
|
{ "crash_delay", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_delay) },
|
|
{ "crash_recovery_angle", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 30 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_recovery_angle) },
|
|
{ "crash_recovery_rate", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 255 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_recovery_rate) },
|
|
{ "crash_limit_yaw", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 1000 }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_limit_yaw) },
|
|
{ "crash_recovery", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_CRASH_RECOVERY }, PG_PID_PROFILE, offsetof(pidProfile_t, crash_recovery) },
|
|
|
|
{ "iterm_rotation", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, iterm_rotation) },
|
|
#if defined(USE_SMART_FEEDFORWARD)
|
|
{ "smart_feedforward", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, smart_feedforward) },
|
|
#endif
|
|
#if defined(USE_ITERM_RELAX)
|
|
{ "iterm_relax", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ITERM_RELAX }, PG_PID_PROFILE, offsetof(pidProfile_t, iterm_relax) },
|
|
{ "iterm_relax_type", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ITERM_RELAX_TYPE }, PG_PID_PROFILE, offsetof(pidProfile_t, iterm_relax_type) },
|
|
{ "iterm_relax_cutoff", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 1, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, iterm_relax_cutoff) },
|
|
#endif
|
|
{ "iterm_windup", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 30, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermWindupPointPercent) },
|
|
{ "iterm_limit", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, itermLimit) },
|
|
{ "pidsum_limit", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { PIDSUM_LIMIT_MIN, PIDSUM_LIMIT_MAX }, PG_PID_PROFILE, offsetof(pidProfile_t, pidSumLimit) },
|
|
{ "pidsum_limit_yaw", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { PIDSUM_LIMIT_MIN, PIDSUM_LIMIT_MAX }, PG_PID_PROFILE, offsetof(pidProfile_t, pidSumLimitYaw) },
|
|
{ "yaw_lowpass_hz", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 500 }, PG_PID_PROFILE, offsetof(pidProfile_t, yaw_lowpass_hz) },
|
|
|
|
#if defined(USE_THROTTLE_BOOST)
|
|
{ "throttle_boost", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, throttle_boost) },
|
|
{ "throttle_boost_cutoff", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 5, 50 }, PG_PID_PROFILE, offsetof(pidProfile_t, throttle_boost_cutoff) },
|
|
#endif
|
|
|
|
#ifdef USE_ACRO_TRAINER
|
|
{ "acro_trainer_angle_limit", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 10, 80 }, PG_PID_PROFILE, offsetof(pidProfile_t, acro_trainer_angle_limit) },
|
|
{ "acro_trainer_lookahead_ms", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 10, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, acro_trainer_lookahead_ms) },
|
|
{ "acro_trainer_debug_axis", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ACRO_TRAINER_DEBUG }, PG_PID_PROFILE, offsetof(pidProfile_t, acro_trainer_debug_axis) },
|
|
{ "acro_trainer_gain", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 25, 255 }, PG_PID_PROFILE, offsetof(pidProfile_t, acro_trainer_gain) },
|
|
#endif // USE_ACRO_TRAINER
|
|
|
|
{ "p_pitch", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_PITCH].P) },
|
|
{ "i_pitch", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_PITCH].I) },
|
|
{ "d_pitch", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_PITCH].D) },
|
|
{ "f_pitch", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 },PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_PITCH].F) },
|
|
{ "p_roll", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_ROLL].P) },
|
|
{ "i_roll", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_ROLL].I) },
|
|
{ "d_roll", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_ROLL].D) },
|
|
{ "f_roll", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 },PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_ROLL].F) },
|
|
{ "p_yaw", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_YAW].P) },
|
|
{ "i_yaw", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_YAW].I) },
|
|
{ "d_yaw", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_YAW].D) },
|
|
{ "f_yaw", VAR_UINT16 | PROFILE_VALUE, .config.minmax = { 0, 2000 },PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_YAW].F) },
|
|
|
|
{ "angle_level_strength", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_LEVEL].P) },
|
|
{ "horizon_level_strength", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_LEVEL].I) },
|
|
{ "horizon_transition", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, pid[PID_LEVEL].D) },
|
|
|
|
{ "level_limit", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 10, 90 }, PG_PID_PROFILE, offsetof(pidProfile_t, levelAngleLimit) },
|
|
|
|
{ "horizon_tilt_effect", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 250 }, PG_PID_PROFILE, offsetof(pidProfile_t, horizon_tilt_effect) },
|
|
{ "horizon_tilt_expert_mode", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, horizon_tilt_expert_mode) },
|
|
|
|
#if defined(USE_ABSOLUTE_CONTROL)
|
|
{ "abs_control_gain", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 20 }, PG_PID_PROFILE, offsetof(pidProfile_t, abs_control_gain) },
|
|
{ "abs_control_limit", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 10, 255 }, PG_PID_PROFILE, offsetof(pidProfile_t, abs_control_limit) },
|
|
{ "abs_control_error_limit", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 1, 45 }, PG_PID_PROFILE, offsetof(pidProfile_t, abs_control_error_limit) },
|
|
{ "abs_control_cutoff", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 1, 45 }, PG_PID_PROFILE, offsetof(pidProfile_t, abs_control_cutoff) },
|
|
#endif
|
|
|
|
#ifdef USE_INTEGRATED_YAW_CONTROL
|
|
{ "use_integrated_yaw", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = {TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, use_integrated_yaw) },
|
|
{ "integrated_yaw_relax", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 255 }, PG_PID_PROFILE, offsetof(pidProfile_t, integrated_yaw_relax) },
|
|
#endif
|
|
|
|
#ifdef USE_D_CUT
|
|
{ "dterm_cut_percent", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_cut_percent) },
|
|
{ "dterm_cut_gain", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 1, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_cut_gain) },
|
|
{ "dterm_cut_range_hz", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 10, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_cut_range_hz) },
|
|
{ "dterm_cut_lowpass_hz", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 1, 20 }, PG_PID_PROFILE, offsetof(pidProfile_t, dterm_cut_lowpass_hz) },
|
|
#endif
|
|
|
|
#ifdef USE_LAUNCH_CONTROL
|
|
{ "launch_control_mode", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_LAUNCH_CONTROL_MODE }, PG_PID_PROFILE, offsetof(pidProfile_t, launchControlMode) },
|
|
{ "launch_trigger_allow_reset", VAR_UINT8 | PROFILE_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_PID_PROFILE, offsetof(pidProfile_t, launchControlAllowTriggerReset) },
|
|
{ "launch_trigger_throttle_percent", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, LAUNCH_CONTROL_THROTTLE_TRIGGER_MAX }, PG_PID_PROFILE, offsetof(pidProfile_t, launchControlThrottlePercent) },
|
|
{ "launch_angle_limit", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 80 }, PG_PID_PROFILE, offsetof(pidProfile_t, launchControlAngleLimit) },
|
|
{ "launch_control_gain", VAR_UINT8 | PROFILE_VALUE, .config.minmax = { 0, 200 }, PG_PID_PROFILE, offsetof(pidProfile_t, launchControlGain) },
|
|
#endif
|
|
|
|
#ifdef USE_THRUST_LINEARIZATION
|
|
{ "thrust_linear", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_PID_PROFILE, offsetof(pidProfile_t, thrustLinearization) },
|
|
#endif
|
|
|
|
// PG_TELEMETRY_CONFIG
|
|
#ifdef USE_TELEMETRY
|
|
{ "tlm_inverted", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, telemetry_inverted) },
|
|
{ "tlm_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, halfDuplex) },
|
|
#if defined(USE_TELEMETRY_FRSKY_HUB)
|
|
#if defined(USE_GPS)
|
|
{ "frsky_default_lat", VAR_INT16 | MASTER_VALUE, .config.minmax = { -9000, 9000 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, gpsNoFixLatitude) },
|
|
{ "frsky_default_long", VAR_INT16 | MASTER_VALUE, .config.minmax = { -18000, 18000 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, gpsNoFixLongitude) },
|
|
{ "frsky_gps_format", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, FRSKY_FORMAT_NMEA }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_coordinate_format) },
|
|
{ "frsky_unit", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_UNIT }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_unit) },
|
|
#endif
|
|
{ "frsky_vfas_precision", VAR_UINT8 | MASTER_VALUE, .config.minmax = { FRSKY_VFAS_PRECISION_LOW, FRSKY_VFAS_PRECISION_HIGH }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, frsky_vfas_precision) },
|
|
#endif // USE_TELEMETRY_FRSKY_HUB
|
|
{ "hott_alarm_int", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 120 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, hottAlarmSoundInterval) },
|
|
{ "pid_in_tlm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = {TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, pidValuesAsTelemetry) },
|
|
{ "report_cell_voltage", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, report_cell_voltage) },
|
|
#if defined(USE_TELEMETRY_IBUS)
|
|
{ "ibus_sensor", VAR_UINT8 | MASTER_VALUE | MODE_ARRAY, .config.array.length = IBUS_SENSOR_COUNT, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, flysky_sensors)},
|
|
#endif
|
|
#ifdef USE_TELEMETRY_MAVLINK
|
|
// Support for misusing the heading field in MAVlink to indicate mAh drawn for Connex Prosight OSD
|
|
// Set to 10 to show a tenth of your capacity drawn.
|
|
// Set to $size_of_battery to get a percentage of battery used.
|
|
{ "mavlink_mah_as_heading_divisor", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 30000 }, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, mavlink_mah_as_heading_divisor) },
|
|
#endif
|
|
{ "telemetry_disabled_sensors", VAR_UINT32 | MASTER_VALUE, .config.u32_max = SENSOR_ALL, PG_TELEMETRY_CONFIG, offsetof(telemetryConfig_t, disabledSensors)},
|
|
#endif // USE_TELEMETRY
|
|
|
|
// PG_LED_STRIP_CONFIG
|
|
#ifdef USE_LED_STRIP
|
|
{ "ledstrip_visual_beeper", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_LED_STRIP_CONFIG, offsetof(ledStripConfig_t, ledstrip_visual_beeper) },
|
|
{ "ledstrip_grb_rgb", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RGB_GRB }, PG_LED_STRIP_CONFIG, offsetof(ledStripConfig_t, ledstrip_grb_rgb) },
|
|
#endif
|
|
|
|
// PG_SDCARD_CONFIG
|
|
#ifdef USE_SDCARD
|
|
{ "sdcard_detect_inverted", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SDCARD_CONFIG, offsetof(sdcardConfig_t, cardDetectInverted) },
|
|
{ "sdcard_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_SDCARD_MODE }, PG_SDCARD_CONFIG, offsetof(sdcardConfig_t, mode) },
|
|
#endif
|
|
#ifdef USE_SDCARD_SPI
|
|
{ "sdcard_dma", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SDCARD_CONFIG, offsetof(sdcardConfig_t, useDma) },
|
|
{ "sdcard_spi_bus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_SDCARD_CONFIG, offsetof(sdcardConfig_t, device) },
|
|
#endif
|
|
#ifdef USE_SDCARD_SDIO
|
|
{ "sdio_clk_bypass", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SDIO_CONFIG, offsetof(sdioConfig_t, clockBypass) },
|
|
{ "sdio_use_cache", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SDIO_CONFIG, offsetof(sdioConfig_t, useCache) },
|
|
{ "sdio_use_4bit_width", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SDIO_CONFIG, offsetof(sdioConfig_t, use4BitWidth) },
|
|
#endif
|
|
|
|
// PG_OSD_CONFIG
|
|
#ifdef USE_OSD
|
|
{ "osd_units", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_UNIT }, PG_OSD_CONFIG, offsetof(osdConfig_t, units) },
|
|
|
|
{ "osd_warn_arming_disable", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_ARMING_DISABLE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_batt_not_full", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_BATTERY_NOT_FULL, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_batt_warning", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_BATTERY_WARNING, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_batt_critical", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_BATTERY_CRITICAL, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_visual_beeper", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_VISUAL_BEEPER, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_crash_flip", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_CRASH_FLIP, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_esc_fail", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_ESC_FAIL, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
{ "osd_warn_no_gps_rescue", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_GPS_RESCUE_UNAVAILABLE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
#ifdef USE_ADC_INTERNAL
|
|
{ "osd_warn_core_temp", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_CORE_TEMPERATURE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
#endif
|
|
#ifdef USE_RC_SMOOTHING_FILTER
|
|
{ "osd_warn_rc_smoothing", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_RC_SMOOTHING, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
#endif
|
|
{ "osd_warn_fail_safe", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_FAIL_SAFE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
#ifdef USE_LAUNCH_CONTROL
|
|
{ "osd_warn_launch_control", VAR_UINT16 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_WARNING_LAUNCH_CONTROL, PG_OSD_CONFIG, offsetof(osdConfig_t, enabledWarnings)},
|
|
#endif
|
|
{ "osd_rssi_alarm", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 100 }, PG_OSD_CONFIG, offsetof(osdConfig_t, rssi_alarm) },
|
|
{ "osd_cap_alarm", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 20000 }, PG_OSD_CONFIG, offsetof(osdConfig_t, cap_alarm) },
|
|
{ "osd_alt_alarm", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 10000 }, PG_OSD_CONFIG, offsetof(osdConfig_t, alt_alarm) },
|
|
{ "osd_esc_temp_alarm", VAR_INT8 | MASTER_VALUE, .config.minmax = { INT8_MIN, INT8_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, esc_temp_alarm) },
|
|
{ "osd_esc_rpm_alarm", VAR_INT16 | MASTER_VALUE, .config.minmax = { ESC_RPM_ALARM_OFF, INT16_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, esc_rpm_alarm) },
|
|
{ "osd_esc_current_alarm", VAR_INT16 | MASTER_VALUE, .config.minmax = { ESC_CURRENT_ALARM_OFF, INT16_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, esc_current_alarm) },
|
|
#ifdef USE_ADC_INTERNAL
|
|
{ "osd_core_temp_alarm", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, UINT8_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, core_temp_alarm) },
|
|
#endif
|
|
|
|
{ "osd_ah_max_pit", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 90 }, PG_OSD_CONFIG, offsetof(osdConfig_t, ahMaxPitch) },
|
|
{ "osd_ah_max_rol", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 90 }, PG_OSD_CONFIG, offsetof(osdConfig_t, ahMaxRoll) },
|
|
{ "osd_ah_invert", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_OSD_CONFIG, offsetof(osdConfig_t, ahInvert) },
|
|
|
|
{ "osd_tim1", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, INT16_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, timers[OSD_TIMER_1]) },
|
|
{ "osd_tim2", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, INT16_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, timers[OSD_TIMER_2]) },
|
|
|
|
{ "osd_vbat_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MAIN_BATT_VOLTAGE]) },
|
|
{ "osd_rssi_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_RSSI_VALUE]) },
|
|
#ifdef USE_RX_LINK_QUALITY_INFO
|
|
{ "osd_link_quality_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_LINK_QUALITY]) },
|
|
#endif
|
|
{ "osd_tim_1_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ITEM_TIMER_1]) },
|
|
{ "osd_tim_2_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ITEM_TIMER_2]) },
|
|
{ "osd_remaining_time_estimate_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_REMAINING_TIME_ESTIMATE]) },
|
|
{ "osd_flymode_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_FLYMODE]) },
|
|
{ "osd_anti_gravity_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ANTI_GRAVITY]) },
|
|
{ "osd_g_force_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_G_FORCE]) },
|
|
{ "osd_throttle_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_THROTTLE_POS]) },
|
|
{ "osd_vtx_channel_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_VTX_CHANNEL]) },
|
|
{ "osd_crosshairs_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CROSSHAIRS]) },
|
|
{ "osd_ah_sbar_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_HORIZON_SIDEBARS]) },
|
|
{ "osd_ah_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ARTIFICIAL_HORIZON]) },
|
|
{ "osd_current_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CURRENT_DRAW]) },
|
|
{ "osd_mah_drawn_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MAH_DRAWN]) },
|
|
{ "osd_motor_diag_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MOTOR_DIAG]) },
|
|
{ "osd_craft_name_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CRAFT_NAME]) },
|
|
{ "osd_gps_speed_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_SPEED]) },
|
|
{ "osd_gps_lon_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_LON]) },
|
|
{ "osd_gps_lat_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_LAT]) },
|
|
{ "osd_gps_sats_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_GPS_SATS]) },
|
|
{ "osd_home_dir_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_HOME_DIR]) },
|
|
{ "osd_home_dist_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_HOME_DIST]) },
|
|
{ "osd_flight_dist_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_FLIGHT_DIST]) },
|
|
{ "osd_compass_bar_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_COMPASS_BAR]) },
|
|
{ "osd_altitude_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ALTITUDE]) },
|
|
{ "osd_pid_roll_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ROLL_PIDS]) },
|
|
{ "osd_pid_pitch_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_PITCH_PIDS]) },
|
|
{ "osd_pid_yaw_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_YAW_PIDS]) },
|
|
{ "osd_debug_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_DEBUG]) },
|
|
{ "osd_power_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_POWER]) },
|
|
{ "osd_pidrate_profile_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_PIDRATE_PROFILE]) },
|
|
{ "osd_warnings_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_WARNINGS]) },
|
|
{ "osd_avg_cell_voltage_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_AVG_CELL_VOLTAGE]) },
|
|
{ "osd_pit_ang_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_PITCH_ANGLE]) },
|
|
{ "osd_rol_ang_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ROLL_ANGLE]) },
|
|
{ "osd_battery_usage_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_MAIN_BATT_USAGE]) },
|
|
{ "osd_disarmed_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_DISARMED]) },
|
|
{ "osd_nheading_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_NUMERICAL_HEADING]) },
|
|
#ifdef USE_VARIO
|
|
{ "osd_nvario_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_NUMERICAL_VARIO]) },
|
|
#endif
|
|
{ "osd_esc_tmp_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ESC_TMP]) },
|
|
{ "osd_esc_rpm_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ESC_RPM]) },
|
|
{ "osd_rtc_date_time_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_RTC_DATETIME]) },
|
|
{ "osd_adjustment_range_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_ADJUSTMENT_RANGE]) },
|
|
{ "osd_flip_arrow_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_FLIP_ARROW]) },
|
|
#ifdef USE_ADC_INTERNAL
|
|
{ "osd_core_temp_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_CORE_TEMPERATURE]) },
|
|
#endif
|
|
#ifdef USE_BLACKBOX
|
|
{ "osd_log_status_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_LOG_STATUS]) },
|
|
#endif
|
|
|
|
#ifdef USE_OSD_STICK_OVERLAY
|
|
{ "osd_stick_overlay_left_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_STICK_OVERLAY_LEFT]) },
|
|
{ "osd_stick_overlay_right_pos", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, OSD_POSCFG_MAX }, PG_OSD_CONFIG, offsetof(osdConfig_t, item_pos[OSD_STICK_OVERLAY_RIGHT]) },
|
|
|
|
{ "osd_stick_overlay_radio_mode", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, 4 }, PG_OSD_CONFIG, offsetof(osdConfig_t, overlay_radio_mode) },
|
|
#endif
|
|
|
|
// OSD stats enabled flags are stored as bitmapped values inside a 32bit parameter
|
|
// It is recommended to keep the settings order the same as the enumeration. This way the settings are displayed in the cli in the same order making it easier on the users
|
|
{ "osd_stat_rtc_date_time", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_RTC_DATE_TIME, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_tim_1", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_TIMER_1, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_tim_2", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_TIMER_2, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_spd", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_SPEED, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_dist", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_DISTANCE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_min_batt", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MIN_BATTERY, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_endbatt", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_END_BATTERY, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_battery", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_BATTERY, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_min_rssi", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MIN_RSSI, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_curr", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_CURRENT, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_used_mah", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_USED_MAH, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_alt", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_ALTITUDE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_bbox", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_BLACKBOX, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_bb_no", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_BLACKBOX_NUMBER, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_g_force", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_G_FORCE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_esc_temp", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_ESC_TEMP, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_max_esc_rpm", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_ESC_RPM, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_min_link_quality", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MIN_LINK_QUALITY,PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
{ "osd_stat_flight_dist", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_FLIGHT_DISTANCE, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
#ifdef USE_GYRO_DATA_ANALYSE
|
|
{ "osd_stat_max_fft", VAR_UINT32 | MASTER_VALUE | MODE_BITSET, .config.bitpos = OSD_STAT_MAX_FFT, PG_OSD_CONFIG, offsetof(osdConfig_t, enabled_stats)},
|
|
#endif
|
|
|
|
#ifdef USE_OSD_PROFILES
|
|
{ "osd_profile", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 1, OSD_PROFILE_COUNT }, PG_OSD_CONFIG, offsetof(osdConfig_t, osdProfileIndex) },
|
|
#endif
|
|
#endif
|
|
|
|
// PG_SYSTEM_CONFIG
|
|
{ "system_hse_mhz", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 30 }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, hseMhz) },
|
|
#if defined(USE_TASK_STATISTICS)
|
|
{ "task_statistics", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, task_statistics) },
|
|
#endif
|
|
{ "debug_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_DEBUG }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, debug_mode) },
|
|
{ "rate_6pos_switch", VAR_INT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, rateProfile6PosSwitch) },
|
|
#ifdef USE_OVERCLOCK
|
|
{ "cpu_overclock", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OVERCLOCK }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, cpu_overclock) },
|
|
#endif
|
|
{ "pwr_on_arm_grace", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 30 }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, powerOnArmingGraceTime) },
|
|
{ "scheduler_optimize_rate", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_SYSTEM_CONFIG, offsetof(systemConfig_t, schedulerPolicy) },
|
|
|
|
// PG_VTX_CONFIG
|
|
#ifdef USE_VTX_COMMON
|
|
{ "vtx_band", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VTX_SETTINGS_NO_BAND, VTX_SETTINGS_MAX_BAND }, PG_VTX_SETTINGS_CONFIG, offsetof(vtxSettingsConfig_t, band) },
|
|
{ "vtx_channel", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VTX_SETTINGS_MIN_CHANNEL, VTX_SETTINGS_MAX_CHANNEL }, PG_VTX_SETTINGS_CONFIG, offsetof(vtxSettingsConfig_t, channel) },
|
|
{ "vtx_power", VAR_UINT8 | MASTER_VALUE, .config.minmax = { VTX_SETTINGS_MIN_POWER, VTX_SETTINGS_POWER_COUNT-1 }, PG_VTX_SETTINGS_CONFIG, offsetof(vtxSettingsConfig_t, power) },
|
|
{ "vtx_low_power_disarm", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_VTX_LOW_POWER_DISARM }, PG_VTX_SETTINGS_CONFIG, offsetof(vtxSettingsConfig_t, lowPowerDisarm) },
|
|
#ifdef VTX_SETTINGS_FREQCMD
|
|
{ "vtx_freq", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, VTX_SETTINGS_MAX_FREQUENCY_MHZ }, PG_VTX_SETTINGS_CONFIG, offsetof(vtxSettingsConfig_t, freq) },
|
|
{ "vtx_pit_mode_freq", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, VTX_SETTINGS_MAX_FREQUENCY_MHZ }, PG_VTX_SETTINGS_CONFIG, offsetof(vtxSettingsConfig_t, pitModeFreq) },
|
|
#endif
|
|
#endif
|
|
|
|
// PG_VTX_CONFIG
|
|
#if defined(USE_VTX_CONTROL) && defined(USE_VTX_COMMON)
|
|
{ "vtx_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_VTX_CONFIG, offsetof(vtxConfig_t, halfDuplex) },
|
|
#endif
|
|
|
|
// PG_VCD_CONFIG
|
|
#ifdef USE_MAX7456
|
|
{ "vcd_video_system", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_VIDEO_SYSTEM }, PG_VCD_CONFIG, offsetof(vcdProfile_t, video_system) },
|
|
{ "vcd_h_offset", VAR_INT8 | MASTER_VALUE, .config.minmax = { -32, 31 }, PG_VCD_CONFIG, offsetof(vcdProfile_t, h_offset) },
|
|
{ "vcd_v_offset", VAR_INT8 | MASTER_VALUE, .config.minmax = { -15, 16 }, PG_VCD_CONFIG, offsetof(vcdProfile_t, v_offset) },
|
|
#endif
|
|
|
|
// PG_MAX7456_CONFIG
|
|
#ifdef USE_MAX7456
|
|
{ "max7456_clock", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_MAX7456_CLOCK }, PG_MAX7456_CONFIG, offsetof(max7456Config_t, clockConfig) },
|
|
{ "max7456_spi_bus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_MAX7456_CONFIG, offsetof(max7456Config_t, spiDevice) },
|
|
{ "max7456_preinit_opu", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MAX7456_CONFIG, offsetof(max7456Config_t, preInitOPU) },
|
|
#endif
|
|
|
|
// PG_DISPLAY_PORT_MSP_CONFIG
|
|
#ifdef USE_MSP_DISPLAYPORT
|
|
{ "displayport_msp_col_adjust", VAR_INT8 | MASTER_VALUE, .config.minmax = { -6, 0 }, PG_DISPLAY_PORT_MSP_CONFIG, offsetof(displayPortProfile_t, colAdjust) },
|
|
{ "displayport_msp_row_adjust", VAR_INT8 | MASTER_VALUE, .config.minmax = { -3, 0 }, PG_DISPLAY_PORT_MSP_CONFIG, offsetof(displayPortProfile_t, rowAdjust) },
|
|
#endif
|
|
|
|
// PG_DISPLAY_PORT_MSP_CONFIG
|
|
#ifdef USE_MAX7456
|
|
{ "displayport_max7456_col_adjust", VAR_INT8| MASTER_VALUE, .config.minmax = { -6, 0 }, PG_DISPLAY_PORT_MAX7456_CONFIG, offsetof(displayPortProfile_t, colAdjust) },
|
|
{ "displayport_max7456_row_adjust", VAR_INT8| MASTER_VALUE, .config.minmax = { -3, 0 }, PG_DISPLAY_PORT_MAX7456_CONFIG, offsetof(displayPortProfile_t, rowAdjust) },
|
|
{ "displayport_max7456_inv", VAR_UINT8| MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_DISPLAY_PORT_MAX7456_CONFIG, offsetof(displayPortProfile_t, invert) },
|
|
{ "displayport_max7456_blk", VAR_UINT8| MASTER_VALUE, .config.minmax = { 0, 3 }, PG_DISPLAY_PORT_MAX7456_CONFIG, offsetof(displayPortProfile_t, blackBrightness) },
|
|
{ "displayport_max7456_wht", VAR_UINT8| MASTER_VALUE, .config.minmax = { 0, 3 }, PG_DISPLAY_PORT_MAX7456_CONFIG, offsetof(displayPortProfile_t, whiteBrightness) },
|
|
#endif
|
|
|
|
#ifdef USE_ESC_SENSOR
|
|
{ "esc_sensor_halfduplex", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_ESC_SENSOR_CONFIG, offsetof(escSensorConfig_t, halfDuplex) },
|
|
{ "esc_sensor_current_offset", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 0, 16000 }, PG_ESC_SENSOR_CONFIG, offsetof(escSensorConfig_t, offset) },
|
|
#endif
|
|
|
|
#ifdef USE_RX_FRSKY_SPI
|
|
{ "frsky_spi_autobind", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_RX_FRSKY_SPI_CONFIG, offsetof(rxFrSkySpiConfig_t, autoBind) },
|
|
{ "frsky_spi_tx_id", VAR_UINT8 | MASTER_VALUE | MODE_ARRAY, .config.array.length = 2, PG_RX_FRSKY_SPI_CONFIG, offsetof(rxFrSkySpiConfig_t, bindTxId) },
|
|
{ "frsky_spi_offset", VAR_INT8 | MASTER_VALUE, .config.minmax = { -127, 127 }, PG_RX_FRSKY_SPI_CONFIG, offsetof(rxFrSkySpiConfig_t, bindOffset) },
|
|
{ "frsky_spi_bind_hop_data", VAR_UINT8 | MASTER_VALUE | MODE_ARRAY, .config.array.length = 50, PG_RX_FRSKY_SPI_CONFIG, offsetof(rxFrSkySpiConfig_t, bindHopData) },
|
|
{ "frsky_x_rx_num", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 255 }, PG_RX_FRSKY_SPI_CONFIG, offsetof(rxFrSkySpiConfig_t, rxNum) },
|
|
{ "frsky_spi_a1_source", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RX_FRSKY_SPI_A1_SOURCE }, PG_RX_FRSKY_SPI_CONFIG, offsetof(rxFrSkySpiConfig_t, a1Source) },
|
|
#endif
|
|
{ "led_inversion", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, ((1 << STATUS_LED_NUMBER) - 1) }, PG_STATUS_LED_CONFIG, offsetof(statusLedConfig_t, inversion) },
|
|
#ifdef USE_DASHBOARD
|
|
{ "dashboard_i2c_bus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2CDEV_COUNT }, PG_DASHBOARD_CONFIG, offsetof(dashboardConfig_t, device) },
|
|
{ "dashboard_i2c_addr", VAR_UINT8 | MASTER_VALUE, .config.minmax = { I2C_ADDR7_MIN, I2C_ADDR7_MAX }, PG_DASHBOARD_CONFIG, offsetof(dashboardConfig_t, address) },
|
|
#endif
|
|
|
|
// PG_CAMERA_CONTROL_CONFIG
|
|
#ifdef USE_CAMERA_CONTROL
|
|
{ "camera_control_mode", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_CAMERA_CONTROL_MODE }, PG_CAMERA_CONTROL_CONFIG, offsetof(cameraControlConfig_t, mode) },
|
|
{ "camera_control_ref_voltage", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 200, 400 }, PG_CAMERA_CONTROL_CONFIG, offsetof(cameraControlConfig_t, refVoltage) },
|
|
{ "camera_control_key_delay", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 100, 500 }, PG_CAMERA_CONTROL_CONFIG, offsetof(cameraControlConfig_t, keyDelayMs) },
|
|
{ "camera_control_internal_resistance", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 10, 1000 }, PG_CAMERA_CONTROL_CONFIG, offsetof(cameraControlConfig_t, internalResistance) },
|
|
{ "camera_control_inverted", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_CAMERA_CONTROL_CONFIG, offsetof(cameraControlConfig_t, inverted) },
|
|
#endif
|
|
|
|
// PG_RANGEFINDER_CONFIG
|
|
#ifdef USE_RANGEFINDER
|
|
{ "rangefinder_hardware", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_RANGEFINDER_HARDWARE }, PG_RANGEFINDER_CONFIG, offsetof(rangefinderConfig_t, rangefinder_hardware) },
|
|
#endif
|
|
|
|
// PG_PINIO_CONFIG
|
|
#ifdef USE_PINIO
|
|
{ "pinio_config", VAR_UINT8 | MASTER_VALUE | MODE_ARRAY, .config.array.length = PINIO_COUNT, PG_PINIO_CONFIG, offsetof(pinioConfig_t, config) },
|
|
#ifdef USE_PINIOBOX
|
|
{ "pinio_box", VAR_UINT8 | MASTER_VALUE | MODE_ARRAY, .config.array.length = PINIO_COUNT, PG_PINIOBOX_CONFIG, offsetof(pinioBoxConfig_t, permanentId) },
|
|
#endif
|
|
#endif
|
|
|
|
//PG USB
|
|
#ifdef USE_USB_CDC_HID
|
|
{ "usb_hid_cdc", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_USB_CONFIG, offsetof(usbDev_t, type) },
|
|
#endif
|
|
#ifdef USE_USB_MSC
|
|
{ "usb_msc_pin_pullup", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_USB_CONFIG, offsetof(usbDev_t, mscButtonUsePullup) },
|
|
#endif
|
|
// PG_FLASH_CONFIG
|
|
#ifdef USE_FLASH_CHIP
|
|
{ "flash_spi_bus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_FLASH_CONFIG, offsetof(flashConfig_t, spiDevice) },
|
|
#endif
|
|
// RCDEVICE
|
|
#ifdef USE_RCDEVICE
|
|
{ "rcdevice_init_dev_attempts", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 10 }, PG_RCDEVICE_CONFIG, offsetof(rcdeviceConfig_t, initDeviceAttempts) },
|
|
{ "rcdevice_init_dev_attempt_interval", VAR_UINT32 | MASTER_VALUE, .config.minmax = { 500, 5000 }, PG_RCDEVICE_CONFIG, offsetof(rcdeviceConfig_t, initDeviceAttemptInterval) },
|
|
#endif
|
|
|
|
// PG_GYRO_DEVICE_CONFIG
|
|
{ "gyro_1_bustype", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BUS_TYPE }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 0, bustype) },
|
|
{ "gyro_1_spibus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 0, spiBus) },
|
|
{ "gyro_1_i2cBus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2CDEV_COUNT }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 0, i2cBus) },
|
|
{ "gyro_1_i2c_address", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2C_ADDR7_MAX }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 0, i2cAddress) },
|
|
{ "gyro_1_sensor_align", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 0, align) },
|
|
#ifdef USE_MULTI_GYRO
|
|
{ "gyro_2_bustype", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_BUS_TYPE }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 1, bustype) },
|
|
{ "gyro_2_spibus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, SPIDEV_COUNT }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 1, spiBus) },
|
|
{ "gyro_2_i2cBus", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2CDEV_COUNT }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 1, i2cBus) },
|
|
{ "gyro_2_i2c_address", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, I2C_ADDR7_MAX }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 1, i2cAddress) },
|
|
{ "gyro_2_sensor_align", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_ALIGNMENT }, PG_GYRO_DEVICE_CONFIG, PG_ARRAY_ELEMENT_OFFSET(gyroDeviceConfig_t, 1, align) },
|
|
#endif
|
|
#ifdef I2C_FULL_RECONFIGURABILITY
|
|
#ifdef USE_I2C_DEVICE_1
|
|
{ "i2c1_pullup", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 0, pullUp) },
|
|
{ "i2c1_overclock", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 0, overClock) },
|
|
#endif
|
|
#ifdef USE_I2C_DEVICE_2
|
|
{ "i2c2_pullup", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 1, pullUp) },
|
|
{ "i2c2_overclock", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 1, overClock) },
|
|
#endif
|
|
#ifdef USE_I2C_DEVICE_3
|
|
{ "i2c3_pullup", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 2, pullUp) },
|
|
{ "i2c3_overclock", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 2, overClock) },
|
|
#endif
|
|
#ifdef USE_I2C_DEVICE_4
|
|
{ "i2c4_pullup", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 3, pullUp) },
|
|
{ "i2c4_overclock", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_I2C_CONFIG, PG_ARRAY_ELEMENT_OFFSET(i2cConfig_t, 3, overClock) },
|
|
#endif
|
|
#endif
|
|
#ifdef USE_MCO
|
|
{ "mco2_on_pc9", VAR_UINT8 | MASTER_VALUE | MODE_LOOKUP, .config.lookup = { TABLE_OFF_ON }, PG_MCO_CONFIG, offsetof(mcoConfig_t, enabled[1]) },
|
|
#endif
|
|
#ifdef USE_RX_SPEKTRUM
|
|
{ "spektrum_spi_protocol", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 255 }, PG_RX_SPEKTRUM_SPI_CONFIG, offsetof(spektrumConfig_t, protocol) },
|
|
{ "spektrum_spi_mfg_id", VAR_UINT8 | MASTER_VALUE | MODE_ARRAY, .config.array.length = 4, PG_RX_SPEKTRUM_SPI_CONFIG, offsetof(spektrumConfig_t, mfgId) },
|
|
{ "spektrum_spi_num_channels", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, DSM_MAX_CHANNEL_COUNT }, PG_RX_SPEKTRUM_SPI_CONFIG, offsetof(spektrumConfig_t, numChannels) },
|
|
#endif
|
|
|
|
// PG_TIMECONFIG
|
|
#ifdef USE_RTC_TIME
|
|
{ "timezone_offset_minutes", VAR_INT16 | MASTER_VALUE, .config.minmax = { TIMEZONE_OFFSET_MINUTES_MIN, TIMEZONE_OFFSET_MINUTES_MAX }, PG_TIME_CONFIG, offsetof(timeConfig_t, tz_offsetMinutes) },
|
|
#endif
|
|
|
|
#ifdef USE_RPM_FILTER
|
|
{ "gyro_rpm_notch_harmonics", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 3 }, PG_RPM_FILTER_CONFIG, offsetof(rpmFilterConfig_t, gyro_rpm_notch_harmonics) },
|
|
{ "gyro_rpm_notch_q", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 1000 }, PG_RPM_FILTER_CONFIG, offsetof(rpmFilterConfig_t, gyro_rpm_notch_q) },
|
|
{ "gyro_rpm_notch_min", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 50, 200 }, PG_RPM_FILTER_CONFIG, offsetof(rpmFilterConfig_t, gyro_rpm_notch_min) },
|
|
{ "dterm_rpm_notch_harmonics", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 0, 3 }, PG_RPM_FILTER_CONFIG, offsetof(rpmFilterConfig_t, dterm_rpm_notch_harmonics) },
|
|
{ "dterm_rpm_notch_q", VAR_UINT16 | MASTER_VALUE, .config.minmax = { 1, 1000 }, PG_RPM_FILTER_CONFIG, offsetof(rpmFilterConfig_t, dterm_rpm_notch_q) },
|
|
{ "dterm_rpm_notch_min", VAR_UINT8 | MASTER_VALUE, .config.minmax = { 50, 200 }, PG_RPM_FILTER_CONFIG, offsetof(rpmFilterConfig_t, dterm_rpm_notch_min) },
|
|
#endif
|
|
};
|
|
|
|
const uint16_t valueTableEntryCount = ARRAYLEN(valueTable);
|
|
|
|
void settingsBuildCheck() {
|
|
STATIC_ASSERT(LOOKUP_TABLE_COUNT == ARRAYLEN(lookupTables), LOOKUP_TABLE_COUNT_incorrect);
|
|
}
|