rusefi
/
atbetaflight
mirror of https://github.com/rusefi/atbetaflight.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
atbetaflight/src/main/fc/fc_init.c

579 lines
14 KiB
C
Raw Blame History

/*
* This file is part of Cleanflight.
*
* Cleanflight is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Cleanflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "platform.h"
#include "blackbox/blackbox.h"
#include "common/axis.h"
#include "common/color.h"
#include "common/maths.h"
#include "common/printf.h"
#include "config/config_eeprom.h"
#include "config/config_profile.h"
#include "config/feature.h"
#include "config/parameter_group.h"
#include "config/parameter_group_ids.h"
#include "cms/cms.h"
#include "cms/cms_types.h"
#include "drivers/nvic.h"
#include "drivers/sensor.h"
#include "drivers/system.h"
#include "drivers/dma.h"
#include "drivers/io.h"
#include "drivers/light_led.h"
#include "drivers/sound_beeper.h"
#include "drivers/timer.h"
#include "drivers/serial.h"
#include "drivers/serial_softserial.h"
#include "drivers/serial_uart.h"
#include "drivers/accgyro.h"
#include "drivers/compass.h"
#include "drivers/pwm_esc_detect.h"
#include "drivers/rx_pwm.h"
#include "drivers/pwm_output.h"
#include "drivers/adc.h"
#include "drivers/bus_i2c.h"
#include "drivers/bus_spi.h"
#include "drivers/inverter.h"
#include "drivers/flash_m25p16.h"
#include "drivers/sonar_hcsr04.h"
#include "drivers/sdcard.h"
#include "drivers/usb_io.h"
#include "drivers/transponder_ir.h"
#include "drivers/exti.h"
#include "drivers/vtx_soft_spi_rtc6705.h"
#ifdef USE_BST
#include "bus_bst.h"
#endif
#include "fc/config.h"
#include "fc/fc_init.h"
#include "fc/fc_msp.h"
#include "fc/fc_tasks.h"
#include "fc/rc_controls.h"
#include "fc/runtime_config.h"
#include "fc/cli.h"
#include "msp/msp_serial.h"
#include "rx/rx.h"
#include "rx/spektrum.h"
#include "io/beeper.h"
#include "io/displayport_max7456.h"
#include "io/serial.h"
#include "io/flashfs.h"
#include "io/gps.h"
#include "io/motors.h"
#include "io/servos.h"
#include "io/gimbal.h"
#include "io/ledstrip.h"
#include "io/dashboard.h"
#include "io/asyncfatfs/asyncfatfs.h"
#include "io/transponder_ir.h"
#include "io/osd.h"
#include "io/displayport_msp.h"
#include "io/vtx.h"
#include "io/vtx_smartaudio.h"
#include "io/vtx_tramp.h"
#include "scheduler/scheduler.h"
#include "sensors/acceleration.h"
#include "sensors/barometer.h"
#include "sensors/battery.h"
#include "sensors/boardalignment.h"
#include "sensors/compass.h"
#include "sensors/esc_sensor.h"
#include "sensors/gyro.h"
#include "sensors/initialisation.h"
#include "sensors/sensors.h"
#include "sensors/sonar.h"
#include "telemetry/telemetry.h"
#include "flight/failsafe.h"
#include "flight/imu.h"
#include "flight/mixer.h"
#include "flight/navigation.h"
#include "flight/pid.h"
#include "flight/servos.h"
#ifdef USE_HARDWARE_REVISION_DETECTION
#include "hardware_revision.h"
#endif
#include "build/build_config.h"
#include "build/debug.h"
#ifdef TARGET_PREINIT
void targetPreInit(void);
#endif
#ifdef TARGET_BUS_INIT
void targetBusInit(void);
#endif
extern uint8_t motorControlEnable;
#ifdef SOFTSERIAL_LOOPBACK
serialPort_t *loopbackPort;
#endif
uint8_t systemState = SYSTEM_STATE_INITIALISING;
void processLoopback(void)
{
#ifdef SOFTSERIAL_LOOPBACK
if (loopbackPort) {
uint8_t bytesWaiting;
while ((bytesWaiting = serialRxBytesWaiting(loopbackPort))) {
uint8_t b = serialRead(loopbackPort);
serialWrite(loopbackPort, b);
};
}
#endif
}
void init(void)
{
#ifdef USE_HAL_DRIVER
HAL_Init();
#endif
printfSupportInit();
systemInit();
// initialize IO (needed for all IO operations)
IOInitGlobal();
#ifdef USE_HARDWARE_REVISION_DETECTION
detectHardwareRevision();
#endif
#ifdef BRUSHED_ESC_AUTODETECT
detectBrushedESC();
#endif
initEEPROM();
ensureEEPROMContainsValidData();
readEEPROM();
systemState |= SYSTEM_STATE_CONFIG_LOADED;
//i2cSetOverclock(masterConfig.i2c_overclock);
debugMode = systemConfig()->debug_mode;
// Latch active features to be used for feature() in the remainder of init().
latchActiveFeatures();
#ifdef TARGET_PREINIT
targetPreInit();
#endif
ledInit(statusLedConfig());
LED2_ON;
#ifdef USE_EXTI
EXTIInit();
#endif
#if defined(BUTTONS)
#ifdef BUTTON_A_PIN
IO_t buttonAPin = IOGetByTag(IO_TAG(BUTTON_A_PIN));
IOInit(buttonAPin, OWNER_SYSTEM, 0);
IOConfigGPIO(buttonAPin, IOCFG_IPU);
#endif
#ifdef BUTTON_B_PIN
IO_t buttonBPin = IOGetByTag(IO_TAG(BUTTON_B_PIN));
IOInit(buttonBPin, OWNER_SYSTEM, 0);
IOConfigGPIO(buttonBPin, IOCFG_IPU);
#endif
// Check status of bind plug and exit if not active
delayMicroseconds(10); // allow configuration to settle
if (!isMPUSoftReset()) {
#if defined(BUTTON_A_PIN) && defined(BUTTON_B_PIN)
// two buttons required
uint8_t secondsRemaining = 5;
bool bothButtonsHeld;
do {
bothButtonsHeld = !IORead(buttonAPin) && !IORead(buttonBPin);
if (bothButtonsHeld) {
if (--secondsRemaining == 0) {
resetEEPROM();
systemReset();
}
delay(1000);
LED0_TOGGLE;
}
} while (bothButtonsHeld);
#endif
}
#endif
#ifdef SPEKTRUM_BIND
if (feature(FEATURE_RX_SERIAL)) {
switch (rxConfig()->serialrx_provider) {
case SERIALRX_SPEKTRUM1024:
case SERIALRX_SPEKTRUM2048:
// Spektrum satellite binding if enabled on startup.
// Must be called before that 100ms sleep so that we don't lose satellite's binding window after startup.
// The rest of Spektrum initialization will happen later - via spektrumInit()
spektrumBind(rxConfigMutable());
break;
}
}
#endif
delay(100);
timerInit(); // timer must be initialized before any channel is allocated
#if defined(AVOID_UART1_FOR_PWM_PPM)
serialInit(feature(FEATURE_SOFTSERIAL),
feature(FEATURE_RX_PPM) || feature(FEATURE_RX_PARALLEL_PWM) ? SERIAL_PORT_USART1 : SERIAL_PORT_NONE);
#elif defined(AVOID_UART2_FOR_PWM_PPM)
serialInit(feature(FEATURE_SOFTSERIAL),
feature(FEATURE_RX_PPM) || feature(FEATURE_RX_PARALLEL_PWM) ? SERIAL_PORT_USART2 : SERIAL_PORT_NONE);
#elif defined(AVOID_UART3_FOR_PWM_PPM)
serialInit(feature(FEATURE_SOFTSERIAL),
feature(FEATURE_RX_PPM) || feature(FEATURE_RX_PARALLEL_PWM) ? SERIAL_PORT_USART3 : SERIAL_PORT_NONE);
#else
serialInit(feature(FEATURE_SOFTSERIAL), SERIAL_PORT_NONE);
#endif
mixerInit(mixerConfig()->mixerMode);
#ifdef USE_SERVOS
servosInit();
#endif
uint16_t idlePulse = motorConfig()->mincommand;
if (feature(FEATURE_3D)) {
idlePulse = flight3DConfig()->neutral3d;
}
if (motorConfig()->dev.motorPwmProtocol == PWM_TYPE_BRUSHED) {
featureClear(FEATURE_3D);
idlePulse = 0; // brushed motors
}
mixerConfigureOutput();
motorDevInit(&motorConfig()->dev, idlePulse, getMotorCount());
#ifdef USE_SERVOS
servoConfigureOutput();
if (isMixerUsingServos()) {
//pwm_params.useChannelForwarding = feature(FEATURE_CHANNEL_FORWARDING);
servoDevInit(&servoConfig()->dev);
}
#endif
#if defined(USE_PWM) || defined(USE_PPM)
if (feature(FEATURE_RX_PPM)) {
ppmRxInit(ppmConfig(), motorConfig()->dev.motorPwmProtocol);
} else if (feature(FEATURE_RX_PARALLEL_PWM)) {
pwmRxInit(pwmConfig());
}
#endif
systemState |= SYSTEM_STATE_MOTORS_READY;
#ifdef BEEPER
beeperInit(beeperDevConfig());
#endif
/* temp until PGs are implemented. */
#ifdef USE_INVERTER
initInverters();
#endif
#ifdef USE_BST
bstInit(BST_DEVICE);
#endif
#ifdef TARGET_BUS_INIT
targetBusInit();
#else
#ifdef USE_SPI
#ifdef USE_SPI_DEVICE_1
spiInit(SPIDEV_1);
#endif
#ifdef USE_SPI_DEVICE_2
spiInit(SPIDEV_2);
#endif
#ifdef USE_SPI_DEVICE_3
spiInit(SPIDEV_3);
#endif
#ifdef USE_SPI_DEVICE_4
spiInit(SPIDEV_4);
#endif
#endif
#ifdef USE_I2C
i2cInit(I2C_DEVICE);
#endif
#endif
#ifdef USE_HARDWARE_REVISION_DETECTION
updateHardwareRevision();
#endif
#ifdef VTX
vtxInit();
#endif
#if defined(SONAR_SOFTSERIAL2_EXCLUSIVE) && defined(SONAR) && defined(USE_SOFTSERIAL2)
if (feature(FEATURE_SONAR) && feature(FEATURE_SOFTSERIAL)) {
serialRemovePort(SERIAL_PORT_SOFTSERIAL2);
}
#endif
#if defined(SONAR_SOFTSERIAL1_EXCLUSIVE) && defined(SONAR) && defined(USE_SOFTSERIAL1)
if (feature(FEATURE_SONAR) && feature(FEATURE_SOFTSERIAL)) {
serialRemovePort(SERIAL_PORT_SOFTSERIAL1);
}
#endif
#ifdef USE_ADC
/* these can be removed from features! */
adcConfigMutable()->vbat.enabled = feature(FEATURE_VBAT);
adcConfigMutable()->currentMeter.enabled = feature(FEATURE_CURRENT_METER);
adcConfigMutable()->rssi.enabled = feature(FEATURE_RSSI_ADC);
adcInit(adcConfig());
#endif
initBoardAlignment(boardAlignment());
#ifdef CMS
cmsInit();
#endif
#ifdef USE_DASHBOARD
if (feature(FEATURE_DASHBOARD)) {
dashboardInit(rxConfig());
}
#endif
#ifdef USE_RTC6705
if (feature(FEATURE_VTX)) {
rtc6705_soft_spi_init();
current_vtx_channel = masterConfig.vtx_channel;
rtc6705_soft_spi_set_channel(vtx_freq[current_vtx_channel]);
rtc6705_soft_spi_set_rf_power(masterConfig.vtx_power);
}
#endif
#ifdef OSD
if (feature(FEATURE_OSD)) {
#ifdef USE_MAX7456
// if there is a max7456 chip for the OSD then use it, otherwise use MSP
displayPort_t *osdDisplayPort = max7456DisplayPortInit(vcdProfile(), displayPortProfileMax7456());
#else
displayPort_t *osdDisplayPort = displayPortMspInit(displayPortProfileMax7456());
#endif
osdInit(osdDisplayPort);
}
#endif
if (!sensorsAutodetect()) {
// if gyro was not detected due to whatever reason, we give up now.
failureMode(FAILURE_MISSING_ACC);
}
systemState |= SYSTEM_STATE_SENSORS_READY;
LED1_ON;
LED0_OFF;
LED2_OFF;
for (int i = 0; i < 10; i++) {
LED1_TOGGLE;
LED0_TOGGLE;
delay(25);
if (!(getBeeperOffMask() & (1 << (BEEPER_SYSTEM_INIT - 1)))) BEEP_ON;
delay(25);
BEEP_OFF;
}
LED0_OFF;
LED1_OFF;
// gyro.targetLooptime set in sensorsAutodetect(), so we are ready to call pidSetTargetLooptime()
pidSetTargetLooptime((gyro.targetLooptime + LOOPTIME_SUSPEND_TIME) * pidConfig()->pid_process_denom); // Initialize pid looptime
pidInitFilters(&currentProfile->pidProfile);
pidInitConfig(&currentProfile->pidProfile);
imuInit();
mspFcInit();
mspSerialInit();
#if defined(USE_MSP_DISPLAYPORT) && defined(CMS)
cmsDisplayPortRegister(displayPortMspInit(displayPortProfileMsp()));
#endif
#ifdef USE_CLI
cliInit(serialConfig());
#endif
failsafeInit();
rxInit(rxConfig(), modeActivationConditions(0));
#ifdef GPS
if (feature(FEATURE_GPS)) {
gpsInit(
serialConfig(),
gpsConfig()
);
navigationInit(
gpsProfile(),
&currentProfile->pidProfile
);
}
#endif
#ifdef LED_STRIP
ledStripInit();
if (feature(FEATURE_LED_STRIP)) {
ledStripEnable();
}
#endif
#ifdef TELEMETRY
if (feature(FEATURE_TELEMETRY)) {
telemetryInit();
}
#endif
#ifdef USE_ESC_SENSOR
if (feature(FEATURE_ESC_SENSOR)) {
escSensorInit();
}
#endif
#ifdef USB_CABLE_DETECTION
usbCableDetectInit();
#endif
#ifdef TRANSPONDER
if (feature(FEATURE_TRANSPONDER)) {
transponderInit(masterConfig.transponderData);
transponderStartRepeating();
systemState |= SYSTEM_STATE_TRANSPONDER_ENABLED;
}
#endif
#ifdef USE_FLASHFS
#if defined(USE_FLASH_M25P16)
m25p16_init(flashConfig());
#endif
flashfsInit();
#endif
#ifdef USE_SDCARD
if (feature(FEATURE_SDCARD)) {
sdcardInsertionDetectInit();
sdcard_init(sdcardConfig()->useDma);
afatfs_init();
}
#endif
#ifdef BLACKBOX
initBlackbox();
#endif
if (mixerConfig()->mixerMode == MIXER_GIMBAL) {
accSetCalibrationCycles(CALIBRATING_ACC_CYCLES);
}
gyroSetCalibrationCycles();
#ifdef BARO
baroSetCalibrationCycles(CALIBRATING_BARO_CYCLES);
#endif
#ifdef VTX_CONTROL
#ifdef VTX_SMARTAUDIO
smartAudioInit();
#endif
#ifdef VTX_TRAMP
trampInit();
#endif
#endif // VTX_CONTROL
// start all timers
// TODO - not implemented yet
timerStart();
ENABLE_STATE(SMALL_ANGLE);
DISABLE_ARMING_FLAG(PREVENT_ARMING);
#ifdef SOFTSERIAL_LOOPBACK
// FIXME this is a hack, perhaps add a FUNCTION_LOOPBACK to support it properly
loopbackPort = (serialPort_t*)&(softSerialPorts[0]);
if (!loopbackPort->vTable) {
loopbackPort = openSoftSerial(0, NULL, 19200, SERIAL_NOT_INVERTED);
}
serialPrint(loopbackPort, "LOOPBACK\r\n");
#endif
// Now that everything has powered up the voltage and cell count be determined.
if (feature(FEATURE_VBAT | FEATURE_CURRENT_METER))
batteryInit();
#ifdef USE_DASHBOARD
if (feature(FEATURE_DASHBOARD)) {
#ifdef USE_OLED_GPS_DEBUG_PAGE_ONLY
dashboardShowFixedPage(PAGE_GPS);
#else
dashboardResetPageCycling();
dashboardEnablePageCycling();
#endif
}
#endif
#ifdef CJMCU
LED2_ON;
#endif
// Latch active features AGAIN since some may be modified by init().
latchActiveFeatures();
motorControlEnable = true;
fcTasksInit();
systemState |= SYSTEM_STATE_READY;
}
Reference in New Issue View Git Blame Copy Permalink