bldc/applications/app.c

/*
	Copyright 2016 - 2019 Benjamin Vedder	benjamin@vedder.se

	This file is part of the VESC firmware.

	The VESC firmware is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    The VESC firmware is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
    */

#include "app.h"
#include "ch.h"
#include "hal.h"
#include "hw.h"
#include "nrf_driver.h"
#include "rfhelp.h"
#include "comm_can.h"

// Private variables
static app_configuration appconf;
static virtual_timer_t output_vt;
static bool output_vt_init_done = false;
static volatile bool output_disabled_now = false;

// Private functions
static void output_vt_cb(void *arg);

const app_configuration* app_get_configuration(void) {
	return &appconf;
}

/**
 * Reconfigure and restart all apps. Some apps don't have any configuration options.
 *
 * @param conf
 * The new configuration to use.
 */
void app_set_configuration(app_configuration *conf) {
	appconf = *conf;

	app_ppm_stop();
	app_adc_stop();
	app_uartcomm_stop();
	app_nunchuk_stop();
	app_balance_stop();

	if (!conf_general_permanent_nrf_found) {
		nrf_driver_stop();
	}

#if CAN_ENABLE
	comm_can_set_baud(conf->can_baud_rate);
#endif

#ifdef APP_CUSTOM_TO_USE
	app_custom_stop();
#endif

	// Configure balance app before starting it.
	app_balance_configure(&appconf.app_balance_conf);

	switch (appconf.app_to_use) {
	case APP_PPM:
		app_ppm_start();
		break;

	case APP_ADC:
		app_adc_start(true);
		break;

	case APP_UART:
		hw_stop_i2c();
		app_uartcomm_start();
		break;

	case APP_PPM_UART:
		hw_stop_i2c();
		app_ppm_start();
		app_uartcomm_start();
		break;

	case APP_ADC_UART:
		hw_stop_i2c();
		app_adc_start(false);
		app_uartcomm_start();
		break;

	case APP_NUNCHUK:
		app_nunchuk_start();
		break;

	case APP_BALANCE:
		app_balance_start();
		break;

	case APP_NRF:
		if (!conf_general_permanent_nrf_found) {
			nrf_driver_init();
			rfhelp_restart();
		}
		break;

	case APP_CUSTOM:
#ifdef APP_CUSTOM_TO_USE
		hw_stop_i2c();
		app_custom_start();
#endif
		break;

	default:
		break;
	}

	app_ppm_configure(&appconf.app_ppm_conf);
	app_adc_configure(&appconf.app_adc_conf);
	app_uartcomm_configure(appconf.app_uart_baudrate, appconf.permanent_uart_enabled);
	app_nunchuk_configure(&appconf.app_chuk_conf);

#ifdef APP_CUSTOM_TO_USE
	app_custom_configure(&appconf);
#endif

	rfhelp_update_conf(&appconf.app_nrf_conf);
}

/**
 * Disable output on apps
 *
 * @param time_ms
 * The amount of time to disable output in ms
 * 0: Enable output now
 * -1: Disable forever
 * >0: Amount of milliseconds to disable output
 */
void app_disable_output(int time_ms) {
	if (!output_vt_init_done) {
		chVTObjectInit(&output_vt);
		output_vt_init_done = true;
	}

	if (time_ms == 0) {
		output_disabled_now = false;
	} else if (time_ms == -1) {
		output_disabled_now = true;
		chVTReset(&output_vt);
	} else {
		output_disabled_now = true;
		chVTSet(&output_vt, MS2ST(time_ms), output_vt_cb, 0);
	}
}

bool app_is_output_disabled(void) {
	return output_disabled_now;
}

static void output_vt_cb(void *arg) {
	(void)arg;
	output_disabled_now = false;
}