2014-04-14 14:02:45 -07:00
|
|
|
/*
|
2017-09-04 12:12:43 -07:00
|
|
|
Copyright 2017 Benjamin Vedder benjamin@vedder.se
|
2014-04-14 14:02:45 -07:00
|
|
|
|
2016-11-04 07:18:34 -07:00
|
|
|
This file is part of the VESC firmware.
|
|
|
|
|
|
|
|
The VESC firmware is free software: you can redistribute it and/or modify
|
2014-04-14 14:02:45 -07:00
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
2016-11-04 07:18:34 -07:00
|
|
|
The VESC firmware is distributed in the hope that it will be useful,
|
2014-04-14 14:02:45 -07:00
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef CONF_GENERAL_H_
|
|
|
|
#define CONF_GENERAL_H_
|
|
|
|
|
2015-05-08 13:53:59 -07:00
|
|
|
// Firmware version
|
2016-11-04 07:18:34 -07:00
|
|
|
#define FW_VERSION_MAJOR 3
|
2018-02-17 08:59:21 -08:00
|
|
|
#define FW_VERSION_MINOR 35
|
2015-05-04 14:25:43 -07:00
|
|
|
|
2014-09-14 14:08:22 -07:00
|
|
|
#include "datatypes.h"
|
|
|
|
|
2015-09-17 14:24:55 -07:00
|
|
|
// Settings and parameters to override
|
2016-11-04 07:18:34 -07:00
|
|
|
//#define VIN_R1 33000.0
|
|
|
|
//#define VIN_R1 39200.0
|
|
|
|
//#define VIN_R2 2200.0
|
|
|
|
//#define CURRENT_AMP_GAIN 10.0
|
|
|
|
//#define CURRENT_SHUNT_RES 0.005
|
|
|
|
//#define WS2811_ENABLE 1
|
|
|
|
//#define WS2811_TEST 1
|
|
|
|
//#define CURR1_DOUBLE_SAMPLE 0
|
|
|
|
//#define CURR2_DOUBLE_SAMPLE 0
|
2016-06-27 08:29:09 -07:00
|
|
|
//#define AS5047_USE_HW_SPI_PINS 1
|
2015-01-22 02:48:38 -08:00
|
|
|
|
2017-09-04 12:12:43 -07:00
|
|
|
// Disable hardware limits on configuration parameters
|
|
|
|
//#define DISABLE_HW_LIMITS
|
|
|
|
|
2016-11-04 07:18:34 -07:00
|
|
|
// Benjamins first HW60 PCB with PB5 and PB6 swapped
|
|
|
|
//#define HW60_VEDDER_FIRST_PCB
|
|
|
|
|
2014-04-14 14:02:45 -07:00
|
|
|
/*
|
|
|
|
* Select only one hardware version
|
|
|
|
*/
|
2015-09-17 14:24:55 -07:00
|
|
|
#if !defined(HW_VERSION_40) && !defined(HW_VERSION_45) && !defined(HW_VERSION_46) && \
|
2015-10-04 11:52:36 -07:00
|
|
|
!defined(HW_VERSION_48) && !defined(HW_VERSION_49) && !defined(HW_VERSION_410) && \
|
2016-11-04 07:18:34 -07:00
|
|
|
!defined(HW_VERSION_60) && !defined(HW_VERSION_R2) && !defined(HW_VERSION_VICTOR_R1A) && \
|
2017-10-27 12:29:12 -07:00
|
|
|
!defined(HW_VERSION_DAS_RS) && !defined(HW_VERSION_PALTA) && !defined(HW_VERSION_RH) && \
|
|
|
|
!defined(HW_VERSION_TP)
|
2014-10-19 10:31:06 -07:00
|
|
|
//#define HW_VERSION_40
|
2014-11-25 12:05:46 -08:00
|
|
|
//#define HW_VERSION_45
|
2015-09-17 14:24:55 -07:00
|
|
|
//#define HW_VERSION_46 // Also for 4.7
|
2015-12-08 12:01:23 -08:00
|
|
|
//#define HW_VERSION_48
|
2015-10-03 16:43:26 -07:00
|
|
|
//#define HW_VERSION_49
|
2016-06-27 08:29:09 -07:00
|
|
|
//#define HW_VERSION_410 // Also for 4.11 and 4.12
|
|
|
|
#define HW_VERSION_60
|
2014-08-15 13:17:06 -07:00
|
|
|
//#define HW_VERSION_R2
|
2014-10-25 12:13:16 -07:00
|
|
|
//#define HW_VERSION_VICTOR_R1A
|
2016-11-04 07:18:34 -07:00
|
|
|
//#define HW_VERSION_DAS_RS
|
2017-09-04 12:12:43 -07:00
|
|
|
//#define HW_VERSION_PALTA
|
|
|
|
//#define HW_VERSION_RH
|
2017-10-27 12:29:12 -07:00
|
|
|
//#define HW_VERSION_TP
|
2015-09-17 14:24:55 -07:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Select default user motor configuration
|
|
|
|
*/
|
2016-11-04 07:18:34 -07:00
|
|
|
//#define MCCONF_DEFAULT_USER "mcconf_sten.h"
|
|
|
|
//#define MCCONF_DEFAULT_USER "mcconf_sp_540kv.h"
|
|
|
|
//#define MCCONF_DEFAULT_USER "mcconf_castle_2028.h"
|
2017-09-04 12:12:43 -07:00
|
|
|
//#define MCCONF_DEFAULT_USER "mcconf_ellwee.h"
|
2014-04-14 14:02:45 -07:00
|
|
|
|
|
|
|
/*
|
2015-09-17 14:24:55 -07:00
|
|
|
* Select default user app configuration
|
2014-04-14 14:02:45 -07:00
|
|
|
*/
|
2015-09-17 14:24:55 -07:00
|
|
|
//#define APPCONF_DEFAULT_USER "appconf_example_ppm.h"
|
2016-04-27 06:32:32 -07:00
|
|
|
//#define APPCONF_DEFAULT_USER "appconf_custom.h"
|
2017-09-04 12:12:43 -07:00
|
|
|
//#define APPCONF_DEFAULT_USER "appconf_ellwee.h"
|
2014-04-14 14:02:45 -07:00
|
|
|
|
2014-04-18 15:09:46 -07:00
|
|
|
/*
|
2017-09-04 12:12:43 -07:00
|
|
|
* Set APP_CUSTOM_TO_USE to the name of the main C file of the custom application.
|
2014-04-18 15:09:46 -07:00
|
|
|
*/
|
2017-09-04 12:12:43 -07:00
|
|
|
//#define APP_CUSTOM_TO_USE "app_ellwee.c"
|
2014-04-18 15:09:46 -07:00
|
|
|
|
2015-04-26 15:02:32 -07:00
|
|
|
/*
|
2015-04-27 11:43:02 -07:00
|
|
|
* Enable CAN-bus
|
2015-04-26 15:02:32 -07:00
|
|
|
*/
|
2016-11-04 07:18:34 -07:00
|
|
|
#define CAN_ENABLE 1
|
2015-04-26 15:02:32 -07:00
|
|
|
|
2015-03-07 05:56:25 -08:00
|
|
|
/*
|
|
|
|
* Settings for the external LEDs (hardcoded for now)
|
|
|
|
*/
|
2016-11-04 07:18:34 -07:00
|
|
|
#define LED_EXT_BATT_LOW 28.0
|
|
|
|
#define LED_EXT_BATT_HIGH 33.0
|
2015-03-07 05:56:25 -08:00
|
|
|
|
2015-04-27 11:43:02 -07:00
|
|
|
/*
|
|
|
|
* Output WS2811 signal on the HALL1 pin. Notice that hall sensors can't be used
|
|
|
|
* at the same time.
|
|
|
|
*/
|
2015-08-23 09:26:05 -07:00
|
|
|
#ifndef WS2811_ENABLE
|
2016-11-04 07:18:34 -07:00
|
|
|
#define WS2811_ENABLE 0
|
2015-08-23 09:26:05 -07:00
|
|
|
#endif
|
2016-11-04 07:18:34 -07:00
|
|
|
#define WS2811_CLK_HZ 800000
|
|
|
|
#define WS2811_LED_NUM 28
|
|
|
|
#define WS2811_USE_CH2 1 // 0: CH1 (PB6) 1: CH2 (PB7)
|
2016-06-27 08:29:09 -07:00
|
|
|
#ifndef WS2811_TEST
|
2016-11-04 07:18:34 -07:00
|
|
|
#define WS2811_TEST 0 // Show a test pattern
|
2016-06-27 08:29:09 -07:00
|
|
|
#endif
|
2015-04-27 11:43:02 -07:00
|
|
|
|
2015-07-31 14:26:50 -07:00
|
|
|
/*
|
|
|
|
* Servo output driver
|
|
|
|
*/
|
2015-08-23 09:26:05 -07:00
|
|
|
#ifndef SERVO_OUT_ENABLE
|
2016-11-04 07:18:34 -07:00
|
|
|
#define SERVO_OUT_ENABLE 0 // Enable servo output
|
2015-08-23 09:26:05 -07:00
|
|
|
#endif
|
2016-11-04 07:18:34 -07:00
|
|
|
#define SERVO_OUT_PULSE_MIN_US 1000 // Minimum pulse length in microseconds
|
|
|
|
#define SERVO_OUT_PULSE_MAX_US 2000 // Maximum pulse length in microseconds
|
|
|
|
#define SERVO_OUT_RATE_HZ 50 // Update rate in Hz
|
2015-07-31 14:26:50 -07:00
|
|
|
|
2015-08-23 09:26:05 -07:00
|
|
|
// Correction factor for computations that depend on the old resistor division factor
|
2016-11-04 07:18:34 -07:00
|
|
|
#define VDIV_CORR ((VIN_R2 / (VIN_R2 + VIN_R1)) / (2.2 / (2.2 + 33.0)))
|
2015-08-23 09:26:05 -07:00
|
|
|
|
2016-06-27 08:29:09 -07:00
|
|
|
// Current ADC to amperes factor
|
2016-11-04 07:18:34 -07:00
|
|
|
#define FAC_CURRENT ((V_REG / 4095.0) / (CURRENT_SHUNT_RES * CURRENT_AMP_GAIN))
|
2016-06-27 08:29:09 -07:00
|
|
|
|
2015-08-23 09:26:05 -07:00
|
|
|
// Actual voltage on 3.3V net based on internal reference
|
2016-11-04 07:18:34 -07:00
|
|
|
//#define V_REG (1.21 / ((float)ADC_Value[ADC_IND_VREFINT] / 4095.0))
|
|
|
|
#define V_REG 3.3
|
2015-08-23 09:26:05 -07:00
|
|
|
|
2016-06-27 08:29:09 -07:00
|
|
|
// Use the pins for the hardware SPI port instead of the hall/encoder pins for the AS5047
|
|
|
|
#ifndef AS5047_USE_HW_SPI_PINS
|
|
|
|
#define AS5047_USE_HW_SPI_PINS 0
|
|
|
|
#endif
|
|
|
|
|
2016-11-06 09:14:06 -08:00
|
|
|
/*
|
2017-09-04 12:12:43 -07:00
|
|
|
* MCU
|
2016-11-06 09:14:06 -08:00
|
|
|
*/
|
|
|
|
#define SYSTEM_CORE_CLOCK 168000000
|
2017-09-04 12:12:43 -07:00
|
|
|
#define STM32_UUID ((uint32_t*)0x1FFF7A10)
|
|
|
|
#define STM32_UUID_8 ((uint8_t*)0x1FFF7A10)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Run the BLDC speed controller in current mode instead of duty cycle mode. This will
|
|
|
|
* make it behave like the FOC speed controller. The duty cycle mode has the advantage
|
|
|
|
* that it does not require the extra current controller since bldc inherently runs
|
|
|
|
* with duty cycle control. The current controller also outputs a duty cycle in the
|
|
|
|
* end, and then the speed controller might as well do the same without the current
|
|
|
|
* controller dynamics in between. FOC on the other hand is inherently based on current
|
|
|
|
* control.
|
|
|
|
*/
|
|
|
|
#define BLDC_SPEED_CONTROL_CURRENT 1
|
|
|
|
|
|
|
|
// Global configuration variables
|
|
|
|
extern bool conf_general_permanent_nrf_found;
|
2016-11-06 09:14:06 -08:00
|
|
|
|
2014-09-14 14:08:22 -07:00
|
|
|
// Functions
|
|
|
|
void conf_general_init(void);
|
2015-12-08 12:01:23 -08:00
|
|
|
void conf_general_get_default_app_configuration(app_configuration *conf);
|
|
|
|
void conf_general_get_default_mc_configuration(mc_configuration *conf);
|
2014-09-17 12:05:57 -07:00
|
|
|
void conf_general_read_app_configuration(app_configuration *conf);
|
|
|
|
bool conf_general_store_app_configuration(app_configuration *conf);
|
2014-09-14 14:08:22 -07:00
|
|
|
void conf_general_read_mc_configuration(mc_configuration *conf);
|
|
|
|
bool conf_general_store_mc_configuration(mc_configuration *conf);
|
2014-09-15 11:48:46 -07:00
|
|
|
bool conf_general_detect_motor_param(float current, float min_rpm, float low_duty,
|
2015-06-19 14:38:46 -07:00
|
|
|
float *int_limit, float *bemf_coupling_k, int8_t *hall_table, int *hall_res);
|
2015-12-08 12:01:23 -08:00
|
|
|
bool conf_general_measure_flux_linkage(float current, float duty,
|
|
|
|
float min_erpm, float res, float *linkage);
|
2014-09-14 14:08:22 -07:00
|
|
|
|
2014-04-14 14:02:45 -07:00
|
|
|
#endif /* CONF_GENERAL_H_ */
|