mirror of https://github.com/rusefi/bldc.git
Thor300 firmware - official from Fajdiga
make Thor300_20s to build Signed-off-by: Dado Mista <dadomista@gmail.com>
This commit is contained in:
Dado Mista
parent
a9a1faf317
commit
85d9c39b49
|
|
@ -0,0 +1,286 @@
|
|||
/*
|
||||
Copyright 2022 Benjamin Vedder benjamin@vedder.se
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
|
||||
#include "hw.h"
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
#include "stm32f4xx_conf.h"
|
||||
#include "utils_math.h"
|
||||
#include <math.h>
|
||||
#include "mc_interface.h"
|
||||
|
||||
// Variables
|
||||
static volatile bool i2c_running = false;
|
||||
static mutex_t shutdown_mutex;
|
||||
static float bt_diff = 0.0;
|
||||
static int pressed_time = 0;
|
||||
|
||||
// I2C configuration
|
||||
static const I2CConfig i2cfg = {
|
||||
OPMODE_I2C,
|
||||
100000,
|
||||
STD_DUTY_CYCLE
|
||||
};
|
||||
|
||||
|
||||
void hw_init_gpio(void) {
|
||||
|
||||
chMtxObjectInit(&shutdown_mutex);
|
||||
// GPIO clock enable
|
||||
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
|
||||
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);
|
||||
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
|
||||
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
|
||||
|
||||
// LEDs
|
||||
palSetPadMode(LED_GREEN_GPIO, LED_GREEN_PIN,
|
||||
PAL_MODE_OUTPUT_PUSHPULL |
|
||||
PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(LED_RED_GPIO, LED_RED_PIN,
|
||||
PAL_MODE_OUTPUT_PUSHPULL |
|
||||
PAL_STM32_OSPEED_HIGHEST);
|
||||
|
||||
// GPIOA Configuration: Channel 1 to 3 as alternate function push-pull
|
||||
palSetPadMode(GPIOA, 8, PAL_MODE_ALTERNATE(GPIO_AF_TIM1) |
|
||||
PAL_STM32_OSPEED_HIGHEST |
|
||||
PAL_STM32_PUDR_FLOATING);
|
||||
palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(GPIO_AF_TIM1) |
|
||||
PAL_STM32_OSPEED_HIGHEST |
|
||||
PAL_STM32_PUDR_FLOATING);
|
||||
palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(GPIO_AF_TIM1) |
|
||||
PAL_STM32_OSPEED_HIGHEST |
|
||||
PAL_STM32_PUDR_FLOATING);
|
||||
|
||||
palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(GPIO_AF_TIM1) |
|
||||
PAL_STM32_OSPEED_HIGHEST |
|
||||
PAL_STM32_PUDR_FLOATING);
|
||||
palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(GPIO_AF_TIM1) |
|
||||
PAL_STM32_OSPEED_HIGHEST |
|
||||
PAL_STM32_PUDR_FLOATING);
|
||||
palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(GPIO_AF_TIM1) |
|
||||
PAL_STM32_OSPEED_HIGHEST |
|
||||
PAL_STM32_PUDR_FLOATING);
|
||||
|
||||
// Hall sensors
|
||||
palSetPadMode(HW_HALL_ENC_GPIO1, HW_HALL_ENC_PIN1, PAL_MODE_INPUT_PULLUP);
|
||||
palSetPadMode(HW_HALL_ENC_GPIO2, HW_HALL_ENC_PIN2, PAL_MODE_INPUT_PULLUP);
|
||||
palSetPadMode(HW_HALL_ENC_GPIO3, HW_HALL_ENC_PIN3, PAL_MODE_INPUT_PULLUP);
|
||||
|
||||
// Phase filters
|
||||
palSetPadMode(GPIOC, 15, PAL_MODE_OUTPUT_OPENDRAIN);
|
||||
palSetPadMode(GPIOC, 14, PAL_MODE_OUTPUT_OPENDRAIN);
|
||||
palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_OPENDRAIN);
|
||||
PHASE_FILTER_OFF();
|
||||
|
||||
// ShutDown
|
||||
palSetPadMode(HW_SHUTDOWN_GPIO, HW_SHUTDOWN_PIN, PAL_MODE_OUTPUT_OPENDRAIN);
|
||||
palSetPadMode(HW_SHUTDOWN_SENSE_GPIO, HW_SHUTDOWN_SENSE_PIN, PAL_MODE_INPUT_ANALOG);
|
||||
|
||||
// ADC Pins
|
||||
palSetPadMode(GPIOA, 0, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_ANALOG);
|
||||
|
||||
palSetPadMode(GPIOB, 0, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOB, 1, PAL_MODE_INPUT_ANALOG);
|
||||
|
||||
palSetPadMode(GPIOC, 0, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOC, 1, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOC, 2, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOC, 3, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOC, 4, PAL_MODE_INPUT_ANALOG);
|
||||
palSetPadMode(GPIOC, 5, PAL_MODE_INPUT_ANALOG);
|
||||
}
|
||||
void hw_setup_adc_channels(void) {
|
||||
// ADC1 regular channels
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_10, 1, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 2, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_5, 3, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 4, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_Vrefint, 5, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC1, ADC_Channel_8, 6, ADC_SampleTime_15Cycles);
|
||||
|
||||
// ADC2 regular channels
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_11, 1, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_1, 2, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_6, 3, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_15, 4, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_0, 5, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC2, ADC_Channel_9, 6, ADC_SampleTime_15Cycles);
|
||||
|
||||
// ADC3 regular channels
|
||||
ADC_RegularChannelConfig(ADC3, ADC_Channel_12, 1, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC3, ADC_Channel_2, 2, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC3, ADC_Channel_3, 3, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC3, ADC_Channel_13, 4, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC3, ADC_Channel_1, 5, ADC_SampleTime_15Cycles);
|
||||
ADC_RegularChannelConfig(ADC3, ADC_Channel_2, 6, ADC_SampleTime_15Cycles);
|
||||
|
||||
// Injected channels
|
||||
ADC_InjectedChannelConfig(ADC1, ADC_Channel_10, 1, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC2, ADC_Channel_11, 1, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC3, ADC_Channel_12, 1, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC1, ADC_Channel_10, 2, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC2, ADC_Channel_11, 2, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC3, ADC_Channel_12, 2, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC1, ADC_Channel_10, 3, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC2, ADC_Channel_11, 3, ADC_SampleTime_15Cycles);
|
||||
ADC_InjectedChannelConfig(ADC3, ADC_Channel_12, 3, ADC_SampleTime_15Cycles);
|
||||
}
|
||||
|
||||
void hw_start_i2c(void) {
|
||||
i2cAcquireBus(&HW_I2C_DEV);
|
||||
|
||||
if (!i2c_running) {
|
||||
palSetPadMode(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN,
|
||||
PAL_MODE_ALTERNATE(HW_I2C_GPIO_AF) |
|
||||
PAL_STM32_OTYPE_OPENDRAIN |
|
||||
PAL_STM32_OSPEED_MID1 |
|
||||
PAL_STM32_PUDR_PULLUP);
|
||||
palSetPadMode(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN,
|
||||
PAL_MODE_ALTERNATE(HW_I2C_GPIO_AF) |
|
||||
PAL_STM32_OTYPE_OPENDRAIN |
|
||||
PAL_STM32_OSPEED_MID1 |
|
||||
PAL_STM32_PUDR_PULLUP);
|
||||
|
||||
i2cStart(&HW_I2C_DEV, &i2cfg);
|
||||
i2c_running = true;
|
||||
}
|
||||
|
||||
i2cReleaseBus(&HW_I2C_DEV);
|
||||
}
|
||||
|
||||
void hw_stop_i2c(void) {
|
||||
i2cAcquireBus(&HW_I2C_DEV);
|
||||
|
||||
if (i2c_running) {
|
||||
palSetPadMode(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN, PAL_MODE_INPUT);
|
||||
palSetPadMode(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN, PAL_MODE_INPUT);
|
||||
|
||||
i2cStop(&HW_I2C_DEV);
|
||||
i2c_running = false;
|
||||
|
||||
}
|
||||
|
||||
i2cReleaseBus(&HW_I2C_DEV);
|
||||
}
|
||||
|
||||
/**
|
||||
* Try to restore the i2c bus
|
||||
*/
|
||||
void hw_try_restore_i2c(void) {
|
||||
if (i2c_running) {
|
||||
i2cAcquireBus(&HW_I2C_DEV);
|
||||
|
||||
palSetPadMode(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN,
|
||||
PAL_STM32_OTYPE_OPENDRAIN |
|
||||
PAL_STM32_OSPEED_MID1 |
|
||||
PAL_STM32_PUDR_PULLUP);
|
||||
|
||||
palSetPadMode(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN,
|
||||
PAL_STM32_OTYPE_OPENDRAIN |
|
||||
PAL_STM32_OSPEED_MID1 |
|
||||
PAL_STM32_PUDR_PULLUP);
|
||||
|
||||
palSetPad(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN);
|
||||
palSetPad(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN);
|
||||
|
||||
chThdSleep(1);
|
||||
|
||||
for(int i = 0;i < 16;i++) {
|
||||
palClearPad(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN);
|
||||
chThdSleep(1);
|
||||
palSetPad(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN);
|
||||
chThdSleep(1);
|
||||
}
|
||||
|
||||
// Generate start then stop condition
|
||||
palClearPad(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN);
|
||||
chThdSleep(1);
|
||||
palClearPad(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN);
|
||||
chThdSleep(1);
|
||||
palSetPad(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN);
|
||||
chThdSleep(1);
|
||||
palSetPad(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN);
|
||||
|
||||
palSetPadMode(HW_I2C_SCL_PORT, HW_I2C_SCL_PIN,
|
||||
PAL_MODE_ALTERNATE(HW_I2C_GPIO_AF) |
|
||||
PAL_STM32_OTYPE_OPENDRAIN |
|
||||
PAL_STM32_OSPEED_MID1 |
|
||||
PAL_STM32_PUDR_PULLUP);
|
||||
|
||||
palSetPadMode(HW_I2C_SDA_PORT, HW_I2C_SDA_PIN,
|
||||
PAL_MODE_ALTERNATE(HW_I2C_GPIO_AF) |
|
||||
PAL_STM32_OTYPE_OPENDRAIN |
|
||||
PAL_STM32_OSPEED_MID1 |
|
||||
PAL_STM32_PUDR_PULLUP);
|
||||
|
||||
HW_I2C_DEV.state = I2C_STOP;
|
||||
i2cStart(&HW_I2C_DEV, &i2cfg);
|
||||
|
||||
i2cReleaseBus(&HW_I2C_DEV);
|
||||
}
|
||||
}
|
||||
|
||||
bool hw_sample_shutdown_button(void) {
|
||||
|
||||
chMtxLock(&shutdown_mutex);
|
||||
bt_diff = (ADC_VOLTS(ADC_IND_SHUTDOWN));
|
||||
bt_diff = (bt_diff + ADC_VOLTS(ADC_IND_SHUTDOWN))/2;
|
||||
chThdSleep(1);
|
||||
bt_diff = (bt_diff + ADC_VOLTS(ADC_IND_SHUTDOWN))/2;
|
||||
chThdSleep(1);
|
||||
bt_diff = (bt_diff + ADC_VOLTS(ADC_IND_SHUTDOWN))/2;
|
||||
chMtxUnlock(&shutdown_mutex);
|
||||
|
||||
if(bt_diff > 2.25){
|
||||
pressed_time += 12;
|
||||
return true;
|
||||
}else{
|
||||
if(pressed_time > 1000){
|
||||
pressed_time = 0;
|
||||
return false;
|
||||
}else{
|
||||
pressed_time = 0;
|
||||
return true;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
return pressed_time < 1000 ;
|
||||
}
|
||||
|
||||
float hw_Thor_get_temp(void) {
|
||||
float t1 = (1.0 / ((logf(NTC_RES(ADC_Value[ADC_IND_TEMP_MOS]) / 10000.0) / 3380.0) + (1.0 / 298.15)) - 273.15);
|
||||
float t3 = (1.0 / ((logf(NTC_RES(ADC_Value[ADC_IND_TEMP_MOS_3]) / 10000.0) / 3380.0) + (1.0 / 298.15)) - 273.15);
|
||||
float res = 0.0;
|
||||
|
||||
if (t1 >= t3) {
|
||||
res = t1;
|
||||
} else {
|
||||
res = t3;
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,256 @@
|
|||
/*
|
||||
Copyright 2022 Benjamin Vedder benjamin@vedder.se
|
||||
|
||||
This file is part of the VESC firmware.
|
||||
|
||||
The VESC firmware is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
The VESC firmware is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef HW_Thor300_20s_H_
|
||||
#define HW_Thor300_20s_H_
|
||||
|
||||
#define HW_NAME "Thor300"
|
||||
|
||||
// HW properties
|
||||
#define HW_HAS_3_SHUNTS
|
||||
#define HW_HAS_PHASE_FILTERS
|
||||
#define INVERTED_SHUNT_POLARITY
|
||||
|
||||
|
||||
// Macros
|
||||
#define LED_GREEN_GPIO GPIOB
|
||||
#define LED_GREEN_PIN 2
|
||||
#define LED_RED_GPIO GPIOA
|
||||
#define LED_RED_PIN 15
|
||||
|
||||
#define LED_GREEN_ON() palSetPad(LED_GREEN_GPIO, LED_GREEN_PIN)
|
||||
#define LED_GREEN_OFF() palClearPad(LED_GREEN_GPIO, LED_GREEN_PIN)
|
||||
#define LED_RED_ON() palSetPad(LED_RED_GPIO, LED_RED_PIN)
|
||||
#define LED_RED_OFF() palClearPad(LED_RED_GPIO, LED_RED_PIN)
|
||||
|
||||
// Phase filter
|
||||
#define PHASE_FILTER_OFF() palSetPad(GPIOC, 15); palSetPad(GPIOC, 14); palSetPad(GPIOC, 13)
|
||||
#define PHASE_FILTER_ON() palClearPad(GPIOC, 15); palClearPad(GPIOC, 14); palClearPad(GPIOC, 13)
|
||||
|
||||
// Shutdown pin
|
||||
#define HW_SHUTDOWN_GPIO GPIOB
|
||||
#define HW_SHUTDOWN_PIN 4
|
||||
#define HW_SHUTDOWN_SENSE_GPIO GPIOC
|
||||
#define HW_SHUTDOWN_SENSE_PIN 5
|
||||
#define HW_SHUTDOWN_HOLD_ON() palSetPad(HW_SHUTDOWN_GPIO, HW_SHUTDOWN_PIN)
|
||||
#define HW_SHUTDOWN_HOLD_OFF() palClearPad(HW_SHUTDOWN_GPIO, HW_SHUTDOWN_PIN)
|
||||
#define HW_SAMPLE_SHUTDOWN() hw_sample_shutdown_button()
|
||||
|
||||
// ADC Config
|
||||
#define HW_ADC_CHANNELS 18
|
||||
#define HW_ADC_INJ_CHANNELS 3
|
||||
#define HW_ADC_NBR_CONV 6
|
||||
|
||||
// ADC Indexes
|
||||
#define ADC_IND_SENS1 3
|
||||
#define ADC_IND_SENS2 4
|
||||
#define ADC_IND_SENS3 5
|
||||
#define ADC_IND_CURR1 0
|
||||
#define ADC_IND_CURR2 1
|
||||
#define ADC_IND_CURR3 2
|
||||
#define ADC_IND_VIN_SENS 11
|
||||
#define ADC_IND_EXT 6
|
||||
#define ADC_IND_EXT2 7
|
||||
#define ADC_IND_SHUTDOWN 10
|
||||
#define ADC_IND_TEMP_MOS 8
|
||||
//#define ADC_IND_TEMP_MOS_2 15
|
||||
#define ADC_IND_TEMP_MOS_3 16
|
||||
#define ADC_IND_TEMP_MOTOR 9
|
||||
#define ADC_IND_VREFINT 12
|
||||
|
||||
// ADC macros and settings
|
||||
|
||||
// Component parameters (can be overridden)
|
||||
#ifndef V_REG
|
||||
#define V_REG 3.3
|
||||
#endif
|
||||
#ifndef VIN_R1
|
||||
#define VIN_R1 100000.0
|
||||
#endif
|
||||
#ifndef VIN_R2
|
||||
#define VIN_R2 3300.0
|
||||
#endif
|
||||
#ifndef CURRENT_AMP_GAIN
|
||||
#define CURRENT_AMP_GAIN 20.0
|
||||
#endif
|
||||
#ifndef CURRENT_SHUNT_RES
|
||||
#define CURRENT_SHUNT_RES (0.0005 / 2.0)
|
||||
#endif
|
||||
|
||||
// Input voltage
|
||||
#define GET_INPUT_VOLTAGE() ((V_REG / 4095.0) * (float)ADC_Value[ADC_IND_VIN_SENS] * ((VIN_R1 + VIN_R2) / VIN_R2))
|
||||
// NTC Termistors
|
||||
#define NTC_RES(adc_val) (10000.0 / ((4095.0 / (float)adc_val) - 1.0))
|
||||
#define NTC_TEMP(adc_ind) hw_Thor_get_temp()
|
||||
|
||||
#define NTC_RES_MOTOR(adc_val) (10000.0 / ((4095.0 / (float)adc_val) - 1.0))
|
||||
#define NTC_TEMP_MOTOR(beta) (1.0 / ((logf(NTC_RES_MOTOR(ADC_Value[ADC_IND_TEMP_MOTOR]) / 10000.0) / beta) + (1.0 / 298.15)) - 273.15)
|
||||
|
||||
#define NTC_TEMP_MOS1() (1.0 / ((logf(NTC_RES(ADC_Value[ADC_IND_TEMP_MOS]) / 10000.0) / 3380.0) + (1.0 / 298.15)) - 273.15)
|
||||
//#define NTC_TEMP_MOS2() (1.0 / ((logf(NTC_RES(ADC_Value[ADC_IND_TEMP_MOS_2]) / 10000.0) / 3380.0) + (1.0 / 298.15)) - 273.15)
|
||||
#define NTC_TEMP_MOS3() (1.0 / ((logf(NTC_RES(ADC_Value[ADC_IND_TEMP_MOS_3]) / 10000.0) / 3380.0) + (1.0 / 298.15)) - 273.15)
|
||||
|
||||
// Voltage on ADC channel
|
||||
#define ADC_VOLTS(ch) ((float)ADC_Value[ch] / 4096.0 * V_REG)
|
||||
|
||||
// Double samples in beginning and end for positive current measurement.
|
||||
// Useful when the shunt sense traces have noise that causes offset.
|
||||
|
||||
#ifndef CURR1_DOUBLE_SAMPLE
|
||||
#define CURR1_DOUBLE_SAMPLE 0
|
||||
#endif
|
||||
#ifndef CURR2_DOUBLE_SAMPLE
|
||||
#define CURR2_DOUBLE_SAMPLE 0
|
||||
#endif
|
||||
#ifndef CURR3_DOUBLE_SAMPLE
|
||||
#define CURR3_DOUBLE_SAMPLE 0
|
||||
#endif
|
||||
|
||||
// COMM-port ADC GPIOs
|
||||
#define HW_ADC_EXT_GPIO GPIOA
|
||||
#define HW_ADC_EXT_PIN 5
|
||||
#define HW_ADC_EXT2_GPIO GPIOA
|
||||
#define HW_ADC_EXT2_PIN 6
|
||||
|
||||
|
||||
// ICU Peripheral for servo decoding
|
||||
#define HW_USE_SERVO_TIM4
|
||||
#define HW_ICU_TIMER TIM4
|
||||
#define HW_ICU_TIM_CLK_EN() RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE)
|
||||
#define HW_ICU_DEV ICUD4
|
||||
#define HW_ICU_CHANNEL ICU_CHANNEL_1
|
||||
#define HW_ICU_GPIO_AF GPIO_AF_TIM4
|
||||
#define HW_ICU_GPIO GPIOB
|
||||
#define HW_ICU_PIN 6
|
||||
|
||||
// I2C Peripheral
|
||||
#define HW_I2C_DEV I2CD2
|
||||
#define HW_I2C_GPIO_AF GPIO_AF_I2C2
|
||||
#define HW_I2C_SCL_PORT GPIOB
|
||||
#define HW_I2C_SCL_PIN 12
|
||||
#define HW_I2C_SDA_PORT GPIOC
|
||||
#define HW_I2C_SDA_PIN 5
|
||||
|
||||
// Hall/encoder pins
|
||||
#define HW_HALL_ENC_GPIO1 GPIOC
|
||||
#define HW_HALL_ENC_PIN1 6
|
||||
#define HW_HALL_ENC_GPIO2 GPIOC
|
||||
#define HW_HALL_ENC_PIN2 7
|
||||
#define HW_HALL_ENC_GPIO3 GPIOC
|
||||
#define HW_HALL_ENC_PIN3 8
|
||||
#define HW_ENC_TIM TIM3
|
||||
#define HW_ENC_TIM_AF GPIO_AF_TIM3
|
||||
#define HW_ENC_TIM_CLK_EN() RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE)
|
||||
#define HW_ENC_EXTI_PORTSRC EXTI_PortSourceGPIOC
|
||||
#define HW_ENC_EXTI_PINSRC EXTI_PinSource8
|
||||
#define HW_ENC_EXTI_CH EXTI9_5_IRQn
|
||||
#define HW_ENC_EXTI_LINE EXTI_Line8
|
||||
#define HW_ENC_EXTI_ISR_VEC EXTI9_5_IRQHandler
|
||||
#define HW_ENC_TIM_ISR_CH TIM3_IRQn
|
||||
#define HW_ENC_TIM_ISR_VEC TIM3_IRQHandler
|
||||
|
||||
// SPI pins
|
||||
#define HW_SPI_DEV SPID3
|
||||
#define HW_SPI_GPIO_AF GPIO_AF_SPI3
|
||||
#define HW_SPI_PORT_NSS GPIOA
|
||||
#define HW_SPI_PIN_NSS 4
|
||||
#define HW_SPI_PORT_SCK GPIOC
|
||||
#define HW_SPI_PIN_SCK 10
|
||||
#define HW_SPI_PORT_MOSI GPIOC
|
||||
#define HW_SPI_PIN_MOSI 12
|
||||
#define HW_SPI_PORT_MISO GPIOC
|
||||
#define HW_SPI_PIN_MISO 11
|
||||
|
||||
// I2C for IMU
|
||||
#define LSM6DS3_SDA_GPIO GPIOD
|
||||
#define LSM6DS3_SDA_PIN 2
|
||||
#define LSM6DS3_SCL_GPIO GPIOB
|
||||
#define LSM6DS3_SCL_PIN 5
|
||||
|
||||
// UART Peripheral
|
||||
#define HW_UART_DEV SD4
|
||||
#define HW_UART_GPIO_AF GPIO_AF_UART4
|
||||
#define HW_UART_TX_PORT GPIOC
|
||||
#define HW_UART_TX_PIN 10
|
||||
#define HW_UART_RX_PORT GPIOC
|
||||
#define HW_UART_RX_PIN 11
|
||||
|
||||
// Permanent UART Peripheral (for NRF52)
|
||||
#define HW_UART_P_BAUD 115200
|
||||
#define HW_UART_P_DEV SD3
|
||||
#define HW_UART_P_GPIO_AF GPIO_AF_USART3
|
||||
#define HW_UART_P_TX_PORT GPIOB
|
||||
#define HW_UART_P_TX_PIN 10
|
||||
#define HW_UART_P_RX_PORT GPIOB
|
||||
#define HW_UART_P_RX_PIN 11
|
||||
|
||||
// Measurement macros
|
||||
#define ADC_V_L1 ADC_Value[ADC_IND_SENS1]
|
||||
#define ADC_V_L2 ADC_Value[ADC_IND_SENS2]
|
||||
#define ADC_V_L3 ADC_Value[ADC_IND_SENS3]
|
||||
#define ADC_V_ZERO (ADC_Value[ADC_IND_VIN_SENS] / 2)
|
||||
|
||||
// Macros
|
||||
#define READ_HALL1() palReadPad(HW_HALL_ENC_GPIO1, HW_HALL_ENC_PIN1)
|
||||
#define READ_HALL2() palReadPad(HW_HALL_ENC_GPIO2, HW_HALL_ENC_PIN2)
|
||||
#define READ_HALL3() palReadPad(HW_HALL_ENC_GPIO3, HW_HALL_ENC_PIN3)
|
||||
|
||||
// Override dead time. See the stm32f4 reference manual for calculating this value.
|
||||
#define HW_DEAD_TIME_NSEC 450.0
|
||||
|
||||
// Default setting overrides
|
||||
#ifndef MCCONF_L_MIN_VOLTAGE
|
||||
#define MCCONF_L_MIN_VOLTAGE 20.0 // Minimum input voltage
|
||||
#endif
|
||||
#ifndef MCCONF_L_MAX_VOLTAGE
|
||||
#define MCCONF_L_MAX_VOLTAGE 90.0 // Maximum input voltage
|
||||
#endif
|
||||
#ifndef MCCONF_DEFAULT_MOTOR_TYPE
|
||||
#define MCCONF_DEFAULT_MOTOR_TYPE MOTOR_TYPE_FOC
|
||||
#endif
|
||||
#ifndef MCCONF_FOC_F_ZV
|
||||
#define MCCONF_FOC_F_ZV 30000.0
|
||||
#endif
|
||||
#ifndef MCCONF_L_MAX_ABS_CURRENT
|
||||
#define MCCONF_L_MAX_ABS_CURRENT 300.0 // The maximum absolute current above which a fault is generated
|
||||
#endif
|
||||
#ifndef MCCONF_FOC_SAMPLE_V0_V7
|
||||
#define MCCONF_FOC_SAMPLE_V0_V7 false // Run control loop in both v0 and v7 (requires phase shunts)
|
||||
#endif
|
||||
#ifndef MCCONF_L_IN_CURRENT_MAX
|
||||
#define MCCONF_L_IN_CURRENT_MAX 100.0 // Input current limit in Amperes (Upper)
|
||||
#endif
|
||||
#ifndef MCCONF_L_IN_CURRENT_MIN
|
||||
#define MCCONF_L_IN_CURRENT_MIN -100.0 // Input current limit in Amperes (Lower)
|
||||
#endif
|
||||
|
||||
// Setting limits
|
||||
#define HW_LIM_CURRENT -250.0, 250.0
|
||||
#define HW_LIM_CURRENT_IN -150.0, 150.0
|
||||
#define HW_LIM_CURRENT_ABS 0.0, 315.0
|
||||
#define HW_LIM_VIN 18.0, 92.0
|
||||
#define HW_LIM_ERPM -200e3, 200e3
|
||||
#define HW_LIM_DUTY_MIN 0.0, 0.1
|
||||
#define HW_LIM_DUTY_MAX 0.0, 0.95
|
||||
#define HW_LIM_TEMP_FET -40.0, 100.0
|
||||
|
||||
// Functions
|
||||
float hw_Thor_get_temp(void);
|
||||
bool hw_sample_shutdown_button(void);
|
||||
#endif /* Thor300_20s_v1_H_ */
|
||||
|
|
@ -97,6 +97,7 @@ package_dict["STORMCORE_100S"] = [['stormcore_100s', default_name],
|
|||
package_dict["Little_FOCer"] = [['Little_FOCer', default_name]]
|
||||
package_dict["Little_FOCer_V3"] = [['Little_FOCer_V3', default_name]]
|
||||
package_dict["Little_FOCer_V3_1"] = [['Little_FOCer_V3_1', default_name]]
|
||||
package_dict["Thor300"] = [['Thor_300_20s', default_name]]
|
||||
package_dict["UXV_SR"] = [['uxv_sr', default_name]]
|
||||
package_dict["GESC"] = [['gesc', default_name]]
|
||||
package_dict["Warrior6"] = [['warrior6', default_name]]
|
||||
|
|
|
|||
Loading…
Reference in New Issue