mirror of https://github.com/rusefi/bldc.git
122 lines
3.8 KiB
C
122 lines
3.8 KiB
C
/*
|
|
Copyright 2016 - 2022 Benjamin Vedder benjamin@vedder.se
|
|
Copyright 2022 Marcos Chaparro mchaparro@powerdesigns.ca
|
|
Copyright 2022 Jakub Tomczak
|
|
|
|
This file is part of the VESC firmware.
|
|
|
|
The VESC firmware is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
The VESC firmware is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "enc_mt6816.h"
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "stm32f4xx_conf.h"
|
|
#include "hw.h"
|
|
#include "mc_interface.h"
|
|
#include "utils.h"
|
|
#include "spi_bb.h"
|
|
#include "timer.h"
|
|
|
|
#include <math.h>
|
|
#include <string.h>
|
|
|
|
#define MT6816_NO_MAGNET_ERROR_MASK 0x0002
|
|
|
|
bool enc_mt6816_init(MT6816_config_t *cfg) {
|
|
if (cfg->spi_dev == NULL) {
|
|
return false;
|
|
}
|
|
|
|
memset(&cfg->state, 0, sizeof(MT6816_state));
|
|
|
|
palSetPadMode(cfg->sck_gpio, cfg->sck_pin, PAL_MODE_ALTERNATE(6) | PAL_STM32_OSPEED_HIGHEST);
|
|
palSetPadMode(cfg->miso_gpio, cfg->miso_pin, PAL_MODE_ALTERNATE(6) | PAL_STM32_OSPEED_HIGHEST);
|
|
palSetPadMode(cfg->nss_gpio, cfg->nss_pin, PAL_MODE_OUTPUT_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
|
palSetPadMode(cfg->mosi_gpio, cfg->mosi_pin, PAL_MODE_ALTERNATE(6) | PAL_STM32_OSPEED_HIGHEST);
|
|
|
|
spiStart(cfg->spi_dev, &(cfg->hw_spi_cfg));
|
|
|
|
cfg->state.spi_error_rate = 0.0;
|
|
cfg->state.encoder_no_magnet_error_rate = 0.0;
|
|
|
|
return true;
|
|
}
|
|
|
|
void enc_mt6816_deinit(MT6816_config_t *cfg) {
|
|
if (cfg->spi_dev == NULL) {
|
|
return;
|
|
}
|
|
|
|
palSetPadMode(cfg->miso_gpio, cfg->miso_pin, PAL_MODE_INPUT_PULLUP);
|
|
palSetPadMode(cfg->sck_gpio, cfg->sck_pin, PAL_MODE_INPUT_PULLUP);
|
|
palSetPadMode(cfg->nss_gpio, cfg->nss_pin, PAL_MODE_INPUT_PULLUP);
|
|
palSetPadMode(cfg->mosi_gpio, cfg->mosi_pin, PAL_MODE_INPUT_PULLUP);
|
|
|
|
spiStop(cfg->spi_dev);
|
|
|
|
cfg->state.last_enc_angle = 0.0;
|
|
cfg->state.spi_error_rate = 0.0;
|
|
}
|
|
|
|
void enc_mt6816_routine(MT6816_config_t *cfg) {
|
|
float timestep = timer_seconds_elapsed_since(cfg->state.last_update_time);
|
|
if (timestep > 1.0) {
|
|
timestep = 1.0;
|
|
}
|
|
cfg->state.last_update_time = timer_time_now();
|
|
|
|
uint16_t pos;
|
|
uint16_t reg_data_03;
|
|
uint16_t reg_data_04;
|
|
uint16_t reg_addr_03 = 0x8300;
|
|
uint16_t reg_addr_04 = 0x8400;
|
|
|
|
#define SPI_BEGIN() spi_bb_delay(); palClearPad(cfg->nss_gpio, cfg->nss_pin); spi_bb_delay();
|
|
#define SPI_END() spi_bb_delay(); palSetPad(cfg->nss_gpio, cfg->nss_pin); spi_bb_delay();
|
|
|
|
// TODO: The fact that the polled version is used means that it is
|
|
// more or less pointless to use the hardware SPI as the CPU sits
|
|
// and wastes cycles waiting for the hardware to finish.
|
|
//
|
|
// A better approach would be to use spiStartExchangeI and use a callback
|
|
// for when the operation finishes and process the data from there.
|
|
SPI_BEGIN();
|
|
reg_data_03 = spiPolledExchange(cfg->spi_dev, reg_addr_03);
|
|
SPI_END();
|
|
spi_bb_delay();
|
|
SPI_BEGIN();
|
|
reg_data_04 = spiPolledExchange(cfg->spi_dev, reg_addr_04);
|
|
SPI_END();
|
|
|
|
pos = (reg_data_03 << 8) | reg_data_04;
|
|
cfg->state.spi_val = pos;
|
|
|
|
if (spi_bb_check_parity(pos)) {
|
|
if (pos & MT6816_NO_MAGNET_ERROR_MASK) {
|
|
++cfg->state.encoder_no_magnet_error_cnt;
|
|
UTILS_LP_FAST(cfg->state.encoder_no_magnet_error_rate, 1.0, timestep);
|
|
} else {
|
|
pos = pos >> 2;
|
|
cfg->state.last_enc_angle = ((float) pos * 360.0) / 16384.0;
|
|
UTILS_LP_FAST(cfg->state.spi_error_rate, 0.0, timestep);
|
|
UTILS_LP_FAST(cfg->state.encoder_no_magnet_error_rate, 0.0, timestep);
|
|
}
|
|
} else {
|
|
++cfg->state.spi_error_cnt;
|
|
UTILS_LP_FAST(cfg->state.spi_error_rate, 1.0, timestep);
|
|
}
|
|
}
|