mirror of https://github.com/rusefi/bldc.git
239 lines
6.6 KiB
C
239 lines
6.6 KiB
C
/*
|
|
Copyright 2017 Benjamin Vedder benjamin@vedder.se
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef HW_RH_H_
|
|
#define HW_RH_H_
|
|
|
|
#define HW_NAME "rh"
|
|
|
|
// HW properties
|
|
#define HW_HAS_3_SHUNTS
|
|
#define HW_HAS_PHASE_SHUNTS
|
|
#define HW_HAS_DRV8305
|
|
|
|
// Macros
|
|
#define ENABLE_GATE() palSetPad(GPIOG, 6)
|
|
#define DISABLE_GATE() palClearPad(GPIOG, 6)
|
|
#define DCCAL_ON()
|
|
#define DCCAL_OFF()
|
|
#define IS_DRV_FAULT() (!palReadPad(GPIOF, 14))
|
|
|
|
#define LED_GREEN_ON() palClearPad(GPIOE, 12)
|
|
#define LED_GREEN_OFF() palSetPad(GPIOE, 12)
|
|
#define LED_RED_ON() palClearPad(GPIOE, 10)
|
|
#define LED_RED_OFF() palSetPad(GPIOE, 10)
|
|
|
|
/*
|
|
* ADC Vector
|
|
*
|
|
* 0: IN3 SENS1
|
|
* 1: IN1 SENS2
|
|
* 2: IN2 SENS3
|
|
* 3: IN10 CURR1
|
|
* 4: IN11 CURR2
|
|
* 5: IN12 CURR3
|
|
* 6: VREFINT VREFINT
|
|
* 7: IN13 AN_IN
|
|
* 8: IN0 NC
|
|
* 9: IN8 NC
|
|
* 10: IN9 PWRGD
|
|
* 11: IN14 EXT
|
|
*/
|
|
|
|
#define HW_ADC_CHANNELS 12
|
|
#define HW_ADC_INJ_CHANNELS 2
|
|
#define HW_ADC_NBR_CONV 4
|
|
|
|
// ADC Indexes
|
|
#define ADC_IND_SENS1 0
|
|
#define ADC_IND_SENS2 1
|
|
#define ADC_IND_SENS3 2
|
|
#define ADC_IND_CURR1 3
|
|
#define ADC_IND_CURR2 4
|
|
#define ADC_IND_CURR3 5
|
|
#define ADC_IND_VIN_SENS 7
|
|
#define ADC_IND_EXT 11
|
|
#define ADC_IND_EXT2 11
|
|
#define ADC_IND_TEMP_MOS 9
|
|
#define ADC_IND_TEMP_MOTOR 9
|
|
#define ADC_IND_VREFINT 6
|
|
|
|
// ADC macros and settings
|
|
|
|
// Component parameters (can be overridden)
|
|
#ifndef V_REG
|
|
#define V_REG 3.3
|
|
#endif
|
|
#ifndef VIN_R1
|
|
#define VIN_R1 68000.0
|
|
#endif
|
|
#ifndef VIN_R2
|
|
#define VIN_R2 6800.0
|
|
#endif
|
|
#ifndef CURRENT_AMP_GAIN
|
|
#define CURRENT_AMP_GAIN 20.0
|
|
#endif
|
|
#ifndef CURRENT_SHUNT_RES
|
|
#define CURRENT_SHUNT_RES 0.01
|
|
#endif
|
|
|
|
// Input voltage
|
|
#define GET_INPUT_VOLTAGE() ((V_REG / 4095.0) * (float)ADC_Value[ADC_IND_VIN_SENS] * ((VIN_R1 + VIN_R2) / VIN_R2))
|
|
|
|
// Voltage on ADC channel
|
|
#define ADC_VOLTS(ch) ((float)ADC_Value[ch] / 4095.0 * V_REG)
|
|
|
|
// NTC Termistors
|
|
#define NTC_RES(adc_val) ((4095.0 * 10000.0) / adc_val - 10000.0)
|
|
#define NTC_TEMP(adc_ind) 0.0
|
|
|
|
#define NTC_RES_MOTOR(adc_val) (10000.0 / ((4095.0 / (float)adc_val) - 1.0)) // Motor temp sensor on low side
|
|
#define NTC_TEMP_MOTOR(beta) 0.0
|
|
|
|
// Double samples in beginning and end for positive current measurement.
|
|
// Useful when the shunt sense traces have noise that causes offset.
|
|
#ifndef CURR1_DOUBLE_SAMPLE
|
|
#define CURR1_DOUBLE_SAMPLE 0
|
|
#endif
|
|
#ifndef CURR2_DOUBLE_SAMPLE
|
|
#define CURR2_DOUBLE_SAMPLE 0
|
|
#endif
|
|
|
|
// Number of servo outputs
|
|
#define HW_SERVO_NUM 2
|
|
|
|
// UART Peripheral
|
|
#define HW_UART_DEV UARTD6
|
|
#define HW_UART_GPIO_AF GPIO_AF_USART6
|
|
#define HW_UART_TX_PORT GPIOC
|
|
#define HW_UART_TX_PIN 6
|
|
#define HW_UART_RX_PORT GPIOC
|
|
#define HW_UART_RX_PIN 7
|
|
|
|
// ICU Peripheral for servo decoding
|
|
#define HW_ICU_DEV ICUD4
|
|
#define HW_ICU_CHANNEL ICU_CHANNEL_1
|
|
#define HW_ICU_GPIO_AF GPIO_AF_TIM4
|
|
#define HW_ICU_GPIO GPIOB
|
|
#define HW_ICU_PIN 6
|
|
|
|
// I2C Peripheral
|
|
#define HW_I2C_DEV I2CD2
|
|
#define HW_I2C_GPIO_AF GPIO_AF_I2C2
|
|
#define HW_I2C_SCL_PORT GPIOB
|
|
#define HW_I2C_SCL_PIN 10
|
|
#define HW_I2C_SDA_PORT GPIOB
|
|
#define HW_I2C_SDA_PIN 11
|
|
|
|
// Hall/encoder pins
|
|
#define HW_HALL_ENC_GPIO1 GPIOC
|
|
#define HW_HALL_ENC_PIN1 6
|
|
#define HW_HALL_ENC_GPIO2 GPIOC
|
|
#define HW_HALL_ENC_PIN2 7
|
|
#define HW_HALL_ENC_GPIO3 GPIOC
|
|
#define HW_HALL_ENC_PIN3 8
|
|
#define HW_ENC_TIM TIM3
|
|
#define HW_ENC_TIM_AF GPIO_AF_TIM3
|
|
#define HW_ENC_TIM_CLK_EN() RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE)
|
|
#define HW_ENC_EXTI_PORTSRC EXTI_PortSourceGPIOC
|
|
#define HW_ENC_EXTI_PINSRC EXTI_PinSource8
|
|
#define HW_ENC_EXTI_CH EXTI9_5_IRQn
|
|
#define HW_ENC_EXTI_LINE EXTI_Line8
|
|
#define HW_ENC_EXTI_ISR_VEC EXTI9_5_IRQHandler
|
|
#define HW_ENC_TIM_ISR_CH TIM3_IRQn
|
|
#define HW_ENC_TIM_ISR_VEC TIM3_IRQHandler
|
|
|
|
// NRF pins
|
|
#define NRF_PORT_CSN GPIOA
|
|
#define NRF_PIN_CSN 4
|
|
#define NRF_PORT_SCK GPIOA
|
|
#define NRF_PIN_SCK 5
|
|
#define NRF_PORT_MOSI GPIOA
|
|
#define NRF_PIN_MOSI 7
|
|
#define NRF_PORT_MISO GPIOA
|
|
#define NRF_PIN_MISO 6
|
|
|
|
// SPI pins
|
|
#define HW_SPI_DEV SPID1
|
|
#define HW_SPI_GPIO_AF GPIO_AF_SPI1
|
|
#define HW_SPI_PORT_NSS GPIOA
|
|
#define HW_SPI_PIN_NSS 4
|
|
#define HW_SPI_PORT_SCK GPIOA
|
|
#define HW_SPI_PIN_SCK 5
|
|
#define HW_SPI_PORT_MOSI GPIOA
|
|
#define HW_SPI_PIN_MOSI 7
|
|
#define HW_SPI_PORT_MISO GPIOA
|
|
#define HW_SPI_PIN_MISO 6
|
|
|
|
// SPI for DRV8305
|
|
#define DRV8305_MOSI_GPIO GPIOC
|
|
#define DRV8305_MOSI_PIN 12
|
|
#define DRV8305_MISO_GPIO GPIOC
|
|
#define DRV8305_MISO_PIN 11
|
|
#define DRV8305_SCK_GPIO GPIOC
|
|
#define DRV8305_SCK_PIN 10
|
|
#define DRV8305_CS_GPIO GPIOD
|
|
#define DRV8305_CS_PIN 8
|
|
|
|
// Measurement macros
|
|
#define ADC_V_L1 ADC_Value[ADC_IND_SENS1]
|
|
#define ADC_V_L2 ADC_Value[ADC_IND_SENS2]
|
|
#define ADC_V_L3 ADC_Value[ADC_IND_SENS3]
|
|
#define ADC_V_ZERO (ADC_Value[ADC_IND_VIN_SENS] / 2)
|
|
|
|
// Macros
|
|
#define READ_HALL1() palReadPad(HW_HALL_ENC_GPIO1, HW_HALL_ENC_PIN1)
|
|
#define READ_HALL2() palReadPad(HW_HALL_ENC_GPIO2, HW_HALL_ENC_PIN2)
|
|
#define READ_HALL3() palReadPad(HW_HALL_ENC_GPIO3, HW_HALL_ENC_PIN3)
|
|
|
|
// Setting limits TODO!
|
|
#define HW_LIM_CURRENT -100.0, 100.0
|
|
#define HW_LIM_CURRENT_IN -100.0, 100.0
|
|
#define HW_LIM_CURRENT_ABS 0.0, 150.0
|
|
#define HW_LIM_VIN 6.0, 57.0
|
|
#define HW_LIM_ERPM -200e3, 200e3
|
|
#define HW_LIM_DUTY_MIN 0.0, 0.1
|
|
#define HW_LIM_DUTY_MAX 0.0, 0.95
|
|
#define HW_LIM_TEMP_FET -40.0, 110.0
|
|
|
|
// Default motor configuration values for this HW
|
|
#ifndef MCCONF_DEFAULT_MOTOR_TYPE
|
|
#define MCCONF_DEFAULT_MOTOR_TYPE MOTOR_TYPE_FOC
|
|
#endif
|
|
|
|
#ifndef MCCONF_L_CURRENT_MAX
|
|
#define MCCONF_L_CURRENT_MAX 2.0 // Current limit in Amperes (Upper)
|
|
#endif
|
|
#ifndef MCCONF_L_CURRENT_MIN
|
|
#define MCCONF_L_CURRENT_MIN -2.0 // Current limit in Amperes (Lower)
|
|
#endif
|
|
#ifndef MCCONF_L_IN_CURRENT_MAX
|
|
#define MCCONF_L_IN_CURRENT_MAX 2.0 // Input current limit in Amperes (Upper)
|
|
#endif
|
|
#ifndef MCCONF_L_IN_CURRENT_MIN
|
|
#define MCCONF_L_IN_CURRENT_MIN -2.0 // Input current limit in Amperes (Lower)
|
|
#endif
|
|
#ifndef MCCONF_L_MAX_ABS_CURRENT
|
|
#define MCCONF_L_MAX_ABS_CURRENT 10.0 // The maximum absolute current above which a fault is generated
|
|
#endif
|
|
|
|
#ifndef MCCONF_CC_MIN_CURRENT
|
|
#define MCCONF_CC_MIN_CURRENT 0.01 // Minimum allowed current
|
|
#endif
|
|
|
|
#endif /* HW_RH_H_ */
|