Go to file

Ethan Zonca bc5da3d2a2 Added support for lowercase hex digits		2016-02-25 20:23:04 -05:00
Drivers	first commit	2015-01-14 10:09:08 -05:00
Inc	Add missing prototypes, fix dangerous missing FIFO argument to is_can_msg_pending!	2016-01-25 14:16:45 -05:00
Middlewares/ST/STM32_USB_Device_Library	first commit	2015-01-14 10:09:08 -05:00
Src	Added support for lowercase hex digits	2016-02-25 20:23:04 -05:00
windows-driver	added windows driver	2015-05-13 17:14:43 -04:00
.gitignore	first commit	2015-01-14 10:09:08 -05:00
.travis.yml	added silent mode, moved GPIO init	2015-05-14 17:41:28 -04:00
LICENSE.md	first commit	2015-01-14 10:09:08 -05:00
Makefile	Added nicer status LED handling: LED blinks for every tx/rx and guarantees at least as much off time as on time	2016-01-25 14:12:13 -05:00
README.md	updated contributors	2015-05-15 14:38:53 -04:00
STM32F042C6_FLASH.ld	first commit	2015-01-14 10:09:08 -05:00
cantact.ioc	first commit	2015-01-14 10:09:08 -05:00
stm32f0x.cfg	first commit	2015-01-14 10:09:08 -05:00

README.md

CANtact Firmware

This repository contains sources for CANtact firmware.

Building

Firmware builds with GCC. Specifically, you will need gcc-arm-none-eabi, which is packaged for Windows, OS X, and Linux on Launchpad. Download for your system and add the bin folder to your PATH.

With that done, you should be able to compile using make.

Flashing & Debugging

Debugging and flashing can be done with any STM32 Discovery board as a programmer. You can also use other tools that support SWD.

To use an STM32 Discovery, run OpenOCD using the stm32f0x.cfg file: openocd -f fw/stm32f0x.cfg.

With OpenOCD running, arm-none-eabi-gdb can be used to load code and debug.

Contributors

Ethan Zonca - Makefile fixes and code size optimization
onejope - Fixes to extended ID handling
Phil Wise - Added dfu-util compatibility to Makefile

License

See LICENSE.md