custom-board-bundle-sample-.../firmware/config/boards/nucleo_f767/!compile-nucleo_f767.bat

rem 
rem STM32F767 version of the firmware for Nucleo-F767ZI board
rem

cd ../../..
set PROJECT_BOARD=nucleo_f767
set PROJECT_CPU=ARCH_STM32F7
set EXTRA_PARAMS=-DDUMMY -DSTM32F767xx ^
 -DEFI_INJECTOR_PIN3=GPIO_UNASSIGNED ^
 -DEFI_COMMUNICATION_PIN=GPIOB_7 ^
 -DEFI_FATAL_ERROR_PIN=GPIOB_14 ^
 -DEFI_ENABLE_ASSERTS=FALSE ^
 -DCH_DBG_ENABLE_CHECKS=FALSE -DCH_DBG_ENABLE_TRACE=FALSE -DCH_DBG_ENABLE_ASSERTS=FALSE -DCH_DBG_ENABLE_STACK_CHECK=FALSE -DCH_DBG_FILL_THREADS=FALSE -DCH_DBG_THREADS_PROFILING=FALSE
set DEBUG_LEVEL_OPT="-O2"
make -j4
if not exist build/rusefi.hex echo FAILED to compile nucleo_f767
if not exist build/rusefi.hex exit -1

..\misc\hex2dfu\HEX2DFU.exe build/rusefi.hex -out build/rusefi.dfu

rem Clean up so that no one inherits this value
set PROJECT_BOARD=
set PROJECT_CPU=
set EXTRA_PARAMS=
set DEBUG_LEVEL_OPT=
set USE_BOOTLOADER=
STM32 Nucleo144-F767ZI board: Initial support (#620) * More EFI_ #ifdefs for config flexibility * Even more config flexibility * New firmware/config/stm32f7ems/* files * New firmware/config/boards/NUCLEO_F767/* files * New firmware/hw_layer/stm32f7/* files * Fix for EFI_USB_SERIAL * Adding #if defined(STM32F7XX) * SPI flags changed in F7: SPI_CR1_DFF --> SPI_CR1_CRCL * I2Cv2 config changed in F7 * More versatile CCM defines * Makefiles * Double #ifs cleanup * docs 2018-11-16 04:40:06 -08:00			`rem`
			`rem STM32F767 version of the firmware for Nucleo-F767ZI board`
			`rem`

			`cd ../../..`
non-default CI issues 2019-04-19 10:38:13 -07:00			`set PROJECT_BOARD=nucleo_f767`
non-default CI issues 2019-04-19 10:52:13 -07:00			`set PROJECT_CPU=ARCH_STM32F7`
F7 2019-02-06 15:53:43 -08:00			`set EXTRA_PARAMS=-DDUMMY -DSTM32F767xx ^`
			`-DEFI_INJECTOR_PIN3=GPIO_UNASSIGNED ^`
F7 2019-02-24 06:39:25 -08:00			`-DEFI_COMMUNICATION_PIN=GPIOB_7 ^`
F7 2019-02-24 06:49:46 -08:00			`-DEFI_FATAL_ERROR_PIN=GPIOB_14 ^`
F7 2019-02-06 15:53:43 -08:00			`-DEFI_ENABLE_ASSERTS=FALSE ^`
			`-DCH_DBG_ENABLE_CHECKS=FALSE -DCH_DBG_ENABLE_TRACE=FALSE -DCH_DBG_ENABLE_ASSERTS=FALSE -DCH_DBG_ENABLE_STACK_CHECK=FALSE -DCH_DBG_FILL_THREADS=FALSE -DCH_DBG_THREADS_PROFILING=FALSE`
STM32 Nucleo144-F767ZI board: Initial support (#620) * More EFI_ #ifdefs for config flexibility * Even more config flexibility * New firmware/config/stm32f7ems/* files * New firmware/config/boards/NUCLEO_F767/* files * New firmware/hw_layer/stm32f7/* files * Fix for EFI_USB_SERIAL * Adding #if defined(STM32F7XX) * SPI flags changed in F7: SPI_CR1_DFF --> SPI_CR1_CRCL * I2Cv2 config changed in F7 * More versatile CCM defines * Makefiles * Double #ifs cleanup * docs 2018-11-16 04:40:06 -08:00			`set DEBUG_LEVEL_OPT="-O2"`
F767 DFU 2019-02-23 15:00:56 -08:00			`make -j4`
non-default CI issues 2019-04-19 10:38:13 -07:00			`if not exist build/rusefi.hex echo FAILED to compile nucleo_f767`
			`if not exist build/rusefi.hex exit -1`

thank you Dron_gus fot the idea! 2019-04-13 16:55:18 -07:00			`..\misc\hex2dfu\HEX2DFU.exe build/rusefi.hex -out build/rusefi.dfu`

			`rem Clean up so that no one inherits this value`
			`set PROJECT_BOARD=`
non-default CI issues 2019-04-19 11:16:34 -07:00			`set PROJECT_CPU=`
thank you Dron_gus fot the idea! 2019-04-13 16:55:18 -07:00			`set EXTRA_PARAMS=`
			`set DEBUG_LEVEL_OPT=`
			`set USE_BOOTLOADER=`