custom-board-bundle-sample-.../hardware/Common_Rail_MC33816/known_issues.txt

 1) RESOLVED IN R0.2   Move C26, it's currently under an inductor. 2 parts can not sit in the same physical space
 2) RESOLVED IN R0.2   Add via for battery wire to be attached. 
 3) RESOLVED IN R0.2   L1 wire leads interfere with C14 and C15. 
 4) RESOLVED IN R0.2   Jumpers are not needed. Connect VccIO->VccIO_Ext and Clk->Y1-3
 5) RESOLVED IN R0.2   D9 had wrong footprint blah. Wrong pin numbers to wrong pins. 
 6) RESOLVED IN R0.2   D10 --> D10_2, and D11 --> D11_2 should be the same package, they were 2 different / wrong footprints. 
 7) RESOLVED IN R0.3   Moved several 0805 components to the back side of the PCB for lower cost assembly.
 8) RESOLVED IN R0.3.2 J15 needs silk and larger hole. J20 needs silk and should use same larger terminal as J8-J9-J10
 9) RESOLVED IN R0.3.2 J15 & J20 silk ^^^ should be on both top and bottom sides of the board
10) See 14             power LED. back side is pretty much free pre-assembled, front side is manual assembly. maybe one LED on each side?
11) RESOLVED IN R0.3.2 J5&J6 why do we need as jumpers? Shall we connect those permanently since looks like those shall be connected?
12) See 14             move more small stuff to same (back) side
13) RESOLVED IN R0.3.2 Fix courtyard warnings on back side, move components slightly. 
14) RESOLVED IN R0.3.2 The current board layout is very hard to work with - can we please have all components on top? PCB space cost nothing comparing with the stress of flipping and poking
15) RESOLVED IN R0.3.2 Noxz is asking to move C21 to next to C22
16) RESOLVED IN R0.3.2 terminals usability is asking for improvements. Ideally can we move more terminals to the edge of the board? ADDED TP2, TP3, TP4, TP5, TP7, TP7, and TP8 
17) RESOLVED IN R0.3.2 Add many LED's for easier diagnostics like PT2000 board. 
18) RESOLVED IN R0.3.3 Update BoostV indicator LED per https://rusefi.com/forum/viewtopic.php?f=4&t=1337&start=75
19) RESOLVED IN R0.3.3 Can we connect connect TP6 to VCCIO since both are 3v?
20) RESOLVED IN R0.3.3 silkscreen font should be larger for DRIVER RSTB etc  https://raw.githubusercontent.com/wiki/rusefi/rusefi/Hardware/MC33816_test_board/MC33816_test_board_3_2_assembled.jpg
21) RESOLVED IN R0.3.3 silkscreen for FLAG0 etc is covered by header plastic https://raw.githubusercontent.com/wiki/rusefi/rusefi/Hardware/MC33816_test_board/MC33816_test_board_3_2_assembled.jpg
22) RESOLVED IN R0.3.3 move TP7=GND to a safer location on the edge of the PCB
23)
Updated J15 J20 per known_issues.txt 8) 9). Moved several components to the front side, more will be moved. The goal is everything on the front. Updated schematic symbol. It had an extra VPWR for some reason. 2020-05-28 03:39:41 -07:00			`1) RESOLVED IN R0.2 Move C26, it's currently under an inductor. 2 parts can not sit in the same physical space`
			`2) RESOLVED IN R0.2 Add via for battery wire to be attached.`
			`3) RESOLVED IN R0.2 L1 wire leads interfere with C14 and C15.`
			`4) RESOLVED IN R0.2 Jumpers are not needed. Connect VccIO->VccIO_Ext and Clk->Y1-3`
			`5) RESOLVED IN R0.2 D9 had wrong footprint blah. Wrong pin numbers to wrong pins.`
			`6) RESOLVED IN R0.2 D10 --> D10_2, and D11 --> D11_2 should be the same package, they were 2 different / wrong footprints.`
			`7) RESOLVED IN R0.3 Moved several 0805 components to the back side of the PCB for lower cost assembly.`
			`8) RESOLVED IN R0.3.2 J15 needs silk and larger hole. J20 needs silk and should use same larger terminal as J8-J9-J10`
			`9) RESOLVED IN R0.3.2 J15 & J20 silk ^^^ should be on both top and bottom sides of the board`
Many components fliped, rotated or moved per known_issues.txt 14) and 15) 2020-05-28 18:32:45 -07:00			`10) See 14 power LED. back side is pretty much free pre-assembled, front side is manual assembly. maybe one LED on each side?`
			`11) RESOLVED IN R0.3.2 J5&J6 why do we need as jumpers? Shall we connect those permanently since looks like those shall be connected?`
			`12) See 14 move more small stuff to same (back) side`
Fixed courtyards per known_issues.txt 13) incremental progress on known_issues.txt 14) 2020-05-28 05:13:57 -07:00			`13) RESOLVED IN R0.3.2 Fix courtyard warnings on back side, move components slightly.`
Many components fliped, rotated or moved per known_issues.txt 14) and 15) 2020-05-28 18:32:45 -07:00			`14) RESOLVED IN R0.3.2 The current board layout is very hard to work with - can we please have all components on top? PCB space cost nothing comparing with the stress of flipping and poking`
			`15) RESOLVED IN R0.3.2 Noxz is asking to move C21 to next to C22`
ADDED TP2, TP3, TP4, TP5, TP7, TP7, and TP8 per known_issues.txt 16) 2020-05-31 05:05:25 -07:00			`16) RESOLVED IN R0.3.2 terminals usability is asking for improvements. Ideally can we move more terminals to the edge of the board? ADDED TP2, TP3, TP4, TP5, TP7, TP7, and TP8`
added many LED's for diagnostics purposes, per known_issues.txt 17) 2020-05-30 19:43:56 -07:00			`17) RESOLVED IN R0.3.2 Add many LED's for easier diagnostics like PT2000 board.`
Updated Vboost LED 2020-11-26 04:55:51 -08:00			`18) RESOLVED IN R0.3.3 Update BoostV indicator LED per https://rusefi.com/forum/viewtopic.php?f=4&t=1337&start=75`
Connected 3.3V and VCCIO with 0R jumper. 2020-11-26 16:09:57 -08:00			`19) RESOLVED IN R0.3.3 Can we connect connect TP6 to VCCIO since both are 3v?`
Updated / made silk screen larger and easier to read moved TP7 GND via 2020-11-26 05:47:09 -08:00			`20) RESOLVED IN R0.3.3 silkscreen font should be larger for DRIVER RSTB etc https://raw.githubusercontent.com/wiki/rusefi/rusefi/Hardware/MC33816_test_board/MC33816_test_board_3_2_assembled.jpg`
			`21) RESOLVED IN R0.3.3 silkscreen for FLAG0 etc is covered by header plastic https://raw.githubusercontent.com/wiki/rusefi/rusefi/Hardware/MC33816_test_board/MC33816_test_board_3_2_assembled.jpg`
			`22) RESOLVED IN R0.3.3 move TP7=GND to a safer location on the edge of the PCB`
GDI 2020-10-21 10:23:15 -07:00			`23)`