custom-board-bundle-sample-.../firmware/config/boards/microrusefi/board.mk

# Combine the related files for a specific platform and MCU.

# Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/microrusefi/board_configuration.cpp

# Target processor details
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
  BOARDINC  = $(BOARDS_DIR)/microrusefi
  BOARDINC += $(PROJECT_DIR)/config/stm32f4ems	# For board.h
  BOARDINC += $(BOARDS_DIR)/microrusefi # For knock_config.h
else
  BOARDINC += $(BOARDS_DIR)/microrusefi # For knock_config.h
endif

# see also openblt/board.mk STATUS_LED
DDEFS += -DLED_CRITICAL_ERROR_BRAIN_PIN=Gpio::E3

# *TEMPORARY* breaking TTL thus breaking Bluetooth for microRusEFI in order to enable SPI3 for SD card
# *TODO* need to give people the horrible choice between Bluetooth via TTL or SD card via SPI :( horrible choice 
# PB10/PB11 uses UART3 peripheral and J12/J13 on MRE
# we also have PC10/PC11 exposed on J4 but that's same UART3
DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=Gpio::B10 -DEFI_CONSOLE_RX_BRAIN_PIN=Gpio::B11

# on MRE 0.6.0 we have SD card on SPI2 which shared channel 3 with USART3
# todo: enable serial which would not DMA thus not conflict?
DDEFS += -DSTM32_UART_USE_USART3=FALSE -DHAL_USE_UART=FALSE
DDEFS += -DEFI_USE_UART_DMA=FALSE -DTS_NO_PRIMARY=TRUE

# maybe a way to disable SPI2 privately
#DDEFS += -DSTM32_SPI_USE_SPI2=FALSE

DDEFS += -DEFI_CJ125=FALSE -DBOARD_L9779_COUNT=0 -DEFI_HD44780_LCD=FALSE -DEFI_LCD=FALSE

DDEFS += -DFIRMWARE_ID=\"microRusEFI\"
DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
DDEFS += $(VAR_DEF_ENGINE_TYPE)

# We are running on microRusEFI hardware!
DDEFS += -DHW_MICRO_RUSEFI=1

ifeq ($(PROJECT_CPU),ARCH_STM32F7)
	DDEFS += -DSHORT_BOARD_NAME=mre_f7
else ifeq ($(PROJECT_CPU),ARCH_STM32F4)
	DDEFS += -DSHORT_BOARD_NAME=mre_f4
else
$(error Unsupported PROJECT_CPU for microRusEFI: [$(PROJECT_CPU)])
endif
skeleton & docs (#995) * Documentation additions and clarifications. Added config/boards/skeleton/ as an example and starting point for board-specific support. * Describe where the generated files came from. * Minor rewording * Delete mistakenly added emacs backups * Added an overall description and build notes 2019-11-03 05:41:14 -08:00			`# Combine the related files for a specific platform and MCU.`
microRusefi Default Configuration (#895) * poke * working MRE * why was this on? * comment, cleanup * default silent trigger error on * comment * remove extra * sensible default 2019-08-01 19:27:23 -07:00
skeleton & docs (#995) * Documentation additions and clarifications. Added config/boards/skeleton/ as an example and starting point for board-specific support. * Describe where the generated files came from. * Minor rewording * Delete mistakenly added emacs backups * Added an overall description and build notes 2019-11-03 05:41:14 -08:00			`# Target ECU board design`
Simplify Makefile, unify board.mk files (#2229) * Proper way to add lis302 driver * Proper way to add license directory to includes * Makefile: simplify All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on. * board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC * Cypress: fix CANv2 includence into build 2021-01-17 06:32:06 -08:00			`BOARDCPPSRC = $(BOARDS_DIR)/microrusefi/board_configuration.cpp`
skeleton & docs (#995) * Documentation additions and clarifications. Added config/boards/skeleton/ as an example and starting point for board-specific support. * Describe where the generated files came from. * Minor rewording * Delete mistakenly added emacs backups * Added an overall description and build notes 2019-11-03 05:41:14 -08:00
			`# Target processor details`
			`ifeq ($(PROJECT_CPU),ARCH_STM32F4)`
Simplify Makefile, unify board.mk files (#2229) * Proper way to add lis302 driver * Proper way to add license directory to includes * Makefile: simplify All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on. * board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC * Cypress: fix CANv2 includence into build 2021-01-17 06:32:06 -08:00			`BOARDINC = $(BOARDS_DIR)/microrusefi`
skeleton & docs (#995) * Documentation additions and clarifications. Added config/boards/skeleton/ as an example and starting point for board-specific support. * Describe where the generated files came from. * Minor rewording * Delete mistakenly added emacs backups * Added an overall description and build notes 2019-11-03 05:41:14 -08:00			`BOARDINC += $(PROJECT_DIR)/config/stm32f4ems # For board.h`
Mre sw knock detection (#1815) * Add SW knock control to MRE on AT4 * Update software_knock.cpp cleanup * use knock only for final build * adjust RAM * Update engine_controller.cpp Adjust RAM for HW QC special to build 2020-09-22 00:48:17 -07:00			`BOARDINC += $(BOARDS_DIR)/microrusefi # For knock_config.h`
skeleton & docs (#995) * Documentation additions and clarifications. Added config/boards/skeleton/ as an example and starting point for board-specific support. * Describe where the generated files came from. * Minor rewording * Delete mistakenly added emacs backups * Added an overall description and build notes 2019-11-03 05:41:14 -08:00			`else`
Mre sw knock detection (#1815) * Add SW knock control to MRE on AT4 * Update software_knock.cpp cleanup * use knock only for final build * adjust RAM * Update engine_controller.cpp Adjust RAM for HW QC special to build 2020-09-22 00:48:17 -07:00			`BOARDINC += $(BOARDS_DIR)/microrusefi # For knock_config.h`
skeleton & docs (#995) * Documentation additions and clarifications. Added config/boards/skeleton/ as an example and starting point for board-specific support. * Describe where the generated files came from. * Minor rewording * Delete mistakenly added emacs backups * Added an overall description and build notes 2019-11-03 05:41:14 -08:00			`endif`
microRusefi Default Configuration (#895) * poke * working MRE * why was this on? * comment, cleanup * default silent trigger error on * comment * remove extra * sensible default 2019-08-01 19:27:23 -07:00
reducing code duplication 2022-05-24 13:05:07 -07:00			`# see also openblt/board.mk STATUS_LED`
reducing complexity 2022-07-10 21:15:46 -07:00			`DDEFS += -DLED_CRITICAL_ERROR_BRAIN_PIN=Gpio::E3`
v12 progress 2019-11-19 18:56:25 -08:00
one step sideways 2020-05-14 16:10:01 -07:00			`# TEMPORARY breaking TTL thus breaking Bluetooth for microRusEFI in order to enable SPI3 for SD card`
			`# TODO need to give people the horrible choice between Bluetooth via TTL or SD card via SPI :( horrible choice`
more on BT drama 2022-07-17 23:08:30 -07:00			`# PB10/PB11 uses UART3 peripheral and J12/J13 on MRE`
			`# we also have PC10/PC11 exposed on J4 but that's same UART3`
reducing complexity 2022-07-10 21:15:46 -07:00			`DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=Gpio::B10 -DEFI_CONSOLE_RX_BRAIN_PIN=Gpio::B11`
maybe EFI_CONSOLE_TX_BRAIN_PIN 2020-05-13 21:02:10 -07:00
invalid SD card configuration on MRE causes RED, blinking BLUE and no USB :( #4131 2022-05-02 13:10:19 -07:00			`# on MRE 0.6.0 we have SD card on SPI2 which shared channel 3 with USART3`
			`# todo: enable serial which would not DMA thus not conflict?`
invalid SD card configuration on MRE causes RED, blinking BLUE and no USB :( #4131 2022-05-02 13:37:00 -07:00			`DDEFS += -DSTM32_UART_USE_USART3=FALSE -DHAL_USE_UART=FALSE`
invalid SD card configuration on MRE causes RED, blinking BLUE and no USB :( #4131 2022-05-02 21:54:24 -07:00			`DDEFS += -DEFI_USE_UART_DMA=FALSE -DTS_NO_PRIMARY=TRUE`
invalid SD card configuration on MRE causes RED, blinking BLUE and no USB :( #4131 2022-05-02 13:10:19 -07:00
more on MRE BT drama part 2 2022-07-17 23:15:31 -07:00			`# maybe a way to disable SPI2 privately`
			`#DDEFS += -DSTM32_SPI_USE_SPI2=FALSE`

ISO-TP does not work on real car #4427 oh shit :( 2022-08-10 21:36:00 -07:00			`DDEFS += -DEFI_CJ125=FALSE -DBOARD_L9779_COUNT=0 -DEFI_HD44780_LCD=FALSE -DEFI_LCD=FALSE`
maybe EFI_CONSOLE_TX_BRAIN_PIN 2020-05-13 21:02:10 -07:00
reducing complexity 2022-07-10 21:15:46 -07:00			`DDEFS += -DFIRMWARE_ID=\"microRusEFI\"`
			`DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE`
refactoring: using VAR_DEF_ENGINE_TYPE bash variable for DEFAULT_ENGINE_TYPE Makefile variable 2022-04-09 15:48:33 -07:00			`DDEFS += $(VAR_DEF_ENGINE_TYPE)`
maybe EFI_CONSOLE_TX_BRAIN_PIN 2020-05-13 21:02:10 -07:00
only build in config for the correct board (#2088) * only build in config for the correct board * undo * undo * undo * only touch proteus config * include configs in tests 2020-12-17 14:12:24 -08:00			`# We are running on microRusEFI hardware!`
			`DDEFS += -DHW_MICRO_RUSEFI=1`
Simplify Makefile, unify board.mk files (#2229) * Proper way to add lis302 driver * Proper way to add license directory to includes * Makefile: simplify All ChibiOS stuff is accumulated in ALLCSRC, ALLINC and so on. * board.mk: append sources and includes to ALLSRC, ALLCPPSRC, ALLINC * Cypress: fix CANv2 includence into build 2021-01-17 06:32:06 -08:00
set SHORT_BOARD_NAME from mk, not shell script (#4078) * MRE * proteus * weird format lol * alphax 4 * alphax 2ch * prometheus, subaru * s * put a canary in the coal mine * activate the sleepy canaries * atlas * tdg pdm * The canary detected the problems it needed to This reverts commit b0a3718b115f69f85f78fc4814aec04434968c0f. * Revert "activate the sleepy canaries" This reverts commit f80cfcdd789418caa30854064bcb9ce865eee474. * prometheus 2022-04-18 11:22:05 -07:00			`ifeq ($(PROJECT_CPU),ARCH_STM32F7)`
			`DDEFS += -DSHORT_BOARD_NAME=mre_f7`
			`else ifeq ($(PROJECT_CPU),ARCH_STM32F4)`
			`DDEFS += -DSHORT_BOARD_NAME=mre_f4`
			`else`
			`$(error Unsupported PROJECT_CPU for microRusEFI: [$(PROJECT_CPU)])`
			`endif`