custom-board-bundle-sample-fork-of-rusefi/firmware/config/engines/mazda_miata_1_6.cpp

/*
 * @file mazda_miata_1_6.cpp
 *
 * Frankenso board
 * set_engine_type 41
 *
 * @date Apr 16, 2016
 * @author Andrey Belomutskiy, (c) 2012-2016
 */

#include "engine_template.h"
#include "custom_engine.h"
#include "fsio_impl.h"
#include "thermistors.h"

EXTERN_ENGINE;

void setMiataNA_1_6_Configuration(DECLARE_ENGINE_PARAMETER_F) {
	setCustomEngineConfiguration(PASS_ENGINE_PARAMETER_F);

	engineConfiguration->trigger.type = TT_MAZDA_MIATA_NA;

	engineConfiguration->specs.cylindersCount = 4;
	engineConfiguration->specs.firingOrder = FO_1_THEN_3_THEN_4_THEN2;

	engineConfiguration->vbattDividerCoeff = 9.75;// ((float) (8.2 + 33)) / 8.2 * 2;

	boardConfiguration->idle.solenoidFrequency = 160;
	boardConfiguration->idle.solenoidPin = GPIO_UNASSIGNED;

	setCommonNTCSensor(&engineConfiguration->clt);
	engineConfiguration->clt.config.bias_resistor = 2700;
	setCommonNTCSensor(&engineConfiguration->iat);
	engineConfiguration->iat.config.bias_resistor = 2700;

	boardConfiguration->isSdCardEnabled = true;


	/**
	 * oil pressure line
	 * adc4/pa4/W47
	 */
	engineConfiguration->fsioAdc[0] = EFI_ADC_4;


	// warning light
	/**
	 * to test
	 * set_fsio_setting 0 1800
	 * set_fsio_setting 1 95
	 * set_fsio_setting 3 14
	 *
	 * set_fsio_expression 1 "rpm 0 fsio_setting > coolant 1 fsio_setting > | vbatt 2 fsio_setting < |"
	 * eval "rpm 0 fsio_setting > coolant 1 fsio_setting > | vbatt 2 fsio_setting < |"
	 */
	engineConfiguration->bc.fsio_setting[0] = 6000; // RPM threshold
	engineConfiguration->bc.fsio_setting[1] = 90; // CLT threshold
	engineConfiguration->bc.fsio_setting[2] = 13.0; // voltage threshold

	setFsio(0, GPIOC_13, "rpm 0 fsio_setting > coolant 1 fsio_setting > | vbatt 2 fsio_setting < |" PASS_ENGINE_PARAMETER);

	boardConfiguration->ignitionPins[0] = GPIOE_14; // Frankenso high side - pin 1G
	boardConfiguration->ignitionPins[1] = GPIO_UNASSIGNED;
	boardConfiguration->ignitionPins[2] = GPIOC_7; // Frankenso high side - pin 1H
	boardConfiguration->ignitionPins[3] = GPIO_UNASSIGNED;

	engineConfiguration->ignitionMode = IM_WASTED_SPARK;

	boardConfiguration->injectionPins[0] = GPIOB_9; // #1
	boardConfiguration->injectionPins[1] = GPIOE_2; // #2
	boardConfiguration->injectionPins[2] = GPIOB_8; // #3
	boardConfiguration->injectionPins[3] = GPIOB_7; // #4


}