rusefi
/
custom-board-bundle-sample-fork-of-rusefi
mirror of https://github.com/rusefi/custom-board-bundle-sample-fork-of-rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

reducing analog_inputs debug confusion :)

This commit is contained in:
rusefi 2019-04-25 08:32:20 -04:00
parent 304e8600e5
commit 0292df332c
6 changed files with 21 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
firmware/console/status_loop.cpp
View File

@ -752,14 +752,6 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
#endif /* EFI_HIP_9011 */
switch (engineConfiguration->debugMode) {
case DBG_ANALOG_INFO:
tsOutputChannels->debugFloatField1 = getVoltage("debug", engineConfiguration->tpsAdcChannel);
tsOutputChannels->debugFloatField2 = getVoltage("debug", engineConfiguration->clt.adcChannel);
tsOutputChannels->debugFloatField3 = getVoltage("debug", engineConfiguration->iat.adcChannel);
tsOutputChannels->debugFloatField4 = getVoltage("debug", engineConfiguration->throttlePedalPositionAdcChannel);
tsOutputChannels->debugFloatField5 = getVoltage("debug", engineConfiguration->afr.hwChannel);
tsOutputChannels->debugFloatField6 = getVoltage("debug", engineConfiguration->map.sensor.hwChannel);
break;
case DBG_STATUS:
tsOutputChannels->debugFloatField1 = timeSeconds;
tsOutputChannels->debugIntField1 = atoi(VCS_VERSION);
@ -843,7 +835,7 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
postCanState(tsOutputChannels);
break;
#endif /* EFI_CAN_SUPPORT */
case DBG_ADC:
case DBG_ANALOG_INPUTS:
tsOutputChannels->debugFloatField1 = (engineConfiguration->vbattAdcChannel != EFI_ADC_NONE) ? getVoltageDivided("vbatt", engineConfiguration->vbattAdcChannel) : 0.0f;
tsOutputChannels->debugFloatField2 = (engineConfiguration->tpsAdcChannel != EFI_ADC_NONE) ? getVoltageDivided("tps", engineConfiguration->tpsAdcChannel) : 0.0f;
tsOutputChannels->debugFloatField3 = (engineConfiguration->mafAdcChannel != EFI_ADC_NONE) ? getVoltageDivided("maf", engineConfiguration->mafAdcChannel) : 0.0f;
@ -852,6 +844,9 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
tsOutputChannels->debugFloatField6 = (engineConfiguration->iat.adcChannel != EFI_ADC_NONE) ? getVoltageDivided("iat", engineConfiguration->iat.adcChannel) : 0.0f;
tsOutputChannels->debugFloatField7 = (engineConfiguration->afr.hwChannel != EFI_ADC_NONE) ? getVoltageDivided("ego", engineConfiguration->afr.hwChannel) : 0.0f;
break;
case DBG_ANALOG_INPUTS2:
tsOutputChannels->debugFloatField4 = getVoltage("debug", engineConfiguration->throttlePedalPositionAdcChannel);
break;
case DBG_INSTANT_RPM:
{
float instantRpm = engine->triggerCentral.triggerState.instantRpm;

8
firmware/controllers/algo/auto_generated_enums.cpp
View File

@ -928,14 +928,14 @@ case TLE8888_PIN_9:
}
const char *getDebug_mode_e(debug_mode_e value){
switch(value) {
case DBG_ANALOG_INFO:
return "DBG_ANALOG_INFO";
case DBG_ANALOG_INPUTS2:
return "DBG_ANALOG_INPUTS2";
case DBG_33:
return "DBG_33";
case DBG_34:
return "DBG_34";
case DBG_ADC:
return "DBG_ADC";
case DBG_ANALOG_INPUTS:
return "DBG_ANALOG_INPUTS";
case DBG_ALTERNATOR_PID:
return "DBG_ALTERNATOR_PID";
case DBG_AUX_PID_1:

11
firmware/controllers/algo/rusefi_enums.h
View File

@ -878,7 +878,11 @@ typedef enum {
*/
DBG_BENCH_TEST = 19,
DBG_AUX_VALVES = 20,
DBG_ADC = 21,
/**
* ADC
* See also DBG_ANALOG_INPUTS2
*/
DBG_ANALOG_INPUTS = 21,
DBG_INSTANT_RPM = 22,
DBG_FSIO_EXPRESSION = 23,
@ -890,7 +894,10 @@ typedef enum {
DBG_ELECTRONIC_THROTTLE_EXTRA = 29,
DBG_ION = 30,
DBG_TLE8888 = 31,
DBG_ANALOG_INFO = 32,
/**
* See also DBG_ANALOG_INPUTS
*/
DBG_ANALOG_INPUTS2 = 32,
DBG_33 = 33,
DBG_34 = 34,

2
firmware/controllers/algo/rusefi_generated.h
View File

@ -416,7 +416,7 @@
#define cylinderBore_offset_hex 198
#define cylindersCount_offset 400
#define cylindersCount_offset_hex 190
#define debug_mode_e_enum "Alternator PID", "TPS acceleration enrichment", "Warmup PID", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Trigger Sync", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "ADC", "INSTANT_RPM", "FSIO_EXPRESSION", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog Info", "mode33"
#define debug_mode_e_enum "Alternator PID", "TPS acceleration enrichment", "Warmup PID", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Trigger Sync", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "Analog inputs #1", "INSTANT_RPM", "FSIO_EXPRESSION", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog inputs #2", "mode33"
#define debugMode_offset 2112
#define debugMode_offset_hex 840
#define DIGIPOT_COUNT 4

2
firmware/integration/rusefi_config.txt
View File

@ -158,7 +158,7 @@ float baseFuel;+Fuel squirt duration while cranking\nA number of curves adjust t
int16_t rpm;+Cranking mode threshold. Special cranking logic controls fuel and spark while RPM is below this threshold\nset cranking_rpm X;"RPM", 1, 0, 0, 3000, 0
end_struct
#define debug_mode_e_enum "Alternator PID", "TPS acceleration enrichment", "Warmup PID", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Trigger Sync", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "ADC", "INSTANT_RPM", "FSIO_EXPRESSION", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog Info", "mode33"
#define debug_mode_e_enum "Alternator PID", "TPS acceleration enrichment", "Warmup PID", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Trigger Sync", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "Analog inputs #1", "INSTANT_RPM", "FSIO_EXPRESSION", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog inputs #2", "mode33"
custom debug_mode_e 4 bits, U32, @OFFSET@, [0:5], @@debug_mode_e_enum@@
#define vvt_mode_e_enum "First half", "Second half", "2GZ", "Miata NB2", "mode4", "mode5", "mode6", "mode7"

4
java_console/models/src/com/rusefi/config/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config;
// this file was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Wed Apr 24 21:51:20 EDT 2019
// this file was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Thu Apr 25 08:26:25 EDT 2019
public class Fields {
public static final int accelerometerSpiDevice_offset = 2736;
public static final int acCutoffHighRpm_offset = 1498;
@ -1776,7 +1776,7 @@ public class Fields {
public static final Field TPSDECELENLEANMENTTHRESHOLD = Field.create("TPSDECELENLEANMENTTHRESHOLD", 2100, FieldType.FLOAT);
public static final Field TPSDECELENLEANMENTMULTIPLIER = Field.create("TPSDECELENLEANMENTMULTIPLIER", 2104, FieldType.FLOAT);
public static final Field SLOWADCALPHA = Field.create("SLOWADCALPHA", 2108, FieldType.FLOAT);
public static final String[] debug_mode_e = {"Alternator PID", "TPS acceleration enrichment", "Warmup PID", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Trigger Sync", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "ADC", "INSTANT_RPM", "FSIO_EXPRESSION", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog Info", "mode33"};
public static final String[] debug_mode_e = {"Alternator PID", "TPS acceleration enrichment", "Warmup PID", "Idle Control", "Engine Load accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT input", "Cranking", "Timing", "Closed-loop fuel corr PID", "VSS", "SD card", "sr5", "Knock", "Trigger Sync", "Electronic Throttle", "Executor", "Bench Test / TS commands", "Aux Valves", "Analog inputs #1", "INSTANT_RPM", "FSIO_EXPRESSION", "Status", "CJ125", "CAN", "MAP", "Metrics", "ETB#2", "Ion Sense", "TLE8888", "Analog inputs #2", "mode33"};
public static final Field DEBUGMODE = Field.create("DEBUGMODE", 2112, FieldType.INT, debug_mode_e);
public static final Field WARMUPAFRTHRESHOLD = Field.create("WARMUPAFRTHRESHOLD", 2148, FieldType.FLOAT);
public static final Field BOOSTCUTPRESSURE = Field.create("BOOSTCUTPRESSURE", 2152, FieldType.FLOAT);