diff --git a/firmware/config/boards/hellen/hellen-honda-k/prepend.txt b/firmware/config/boards/hellen/hellen-honda-k/prepend.txt
index cdf1df57ac..6e7ae6b218 100644
--- a/firmware/config/boards/hellen/hellen-honda-k/prepend.txt
+++ b/firmware/config/boards/hellen/hellen-honda-k/prepend.txt
@@ -2,6 +2,7 @@
 
 #define ts_show_hip9011 false
 #define ts_show_cj125 false
+#define ts_show_can_terminator true
 
 
 
diff --git a/firmware/integration/rusefi_config.txt b/firmware/integration/rusefi_config.txt
index cf79934b3f..fa7d04c23a 100644
--- a/firmware/integration/rusefi_config.txt
+++ b/firmware/integration/rusefi_config.txt
@@ -1232,7 +1232,7 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
 	bit canOpenBLT; Allow OpenBLT on Primary CAN
 	bit can2OpenBLT; Allow OpenBLT on Secondary CAN
 	bit injectorFlowAsMassFlow,"mass flow","volumetric flow";Select whether to configure injector flow in volumetric flow (defualt, cc/min) or mass flow (g/s).
-	bit unused1127
+	bit boardUseCanTerminator
 	bit unused1128
 	bit unused1129
 	bit unused1130
diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input
index f8fe46d65d..f3afc2a127 100644
--- a/firmware/tunerstudio/rusefi.input
+++ b/firmware/tunerstudio/rusefi.input
@@ -3583,6 +3583,7 @@ cmd_set_engine_type_default					= "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
 		field = "Bitrate",		canBaudRate
 		field = "RX pin",		canRxPin @@if_ts_show_can_pins
 		field = "TX pin",		canTxPin @@if_ts_show_can_pins
+		field = "CAN terminator",						    boardUseCanTerminator@@if_ts_show_can_terminator
 		field = "Allow OpenBLT",	canOpenBLT
 
 	dialog = canHw2, "Secondary CAN"