diff --git a/README.md b/README.md index 0ed6f61b68..c334826f8b 100644 --- a/README.md +++ b/README.md @@ -50,76 +50,4 @@ See https://rusefi.com/forum/viewtopic.php?f=5&t=9 # Release Notes -| Release date | Revision | Details | -| ------------ | --------- | ------- | -| 10/28/2020 | | [changelog has moved](firmware/CHANGELOG.md) | -| 07/26/2020 | r24635 | improvement #1637: DC motor idle air valve for late 90s German vehicles | -| 07/21/2020 | | bugfix #1592 injectors could stay open on transition from cranking to running under certain conditions | -| 06/17/2020 | r23656 | bugfix #1491 major performance/scheduling improvement | -| 05/21/2020 | r22961 | rusEFI console start-up time improvements | -| 04/18/2020 | r22231 | Renix 44-2-2 trigger support added | -| 04/02/2020 | | Start button feature | -| 03/28/2020 | | Critical error text is now displayed in TunerStudio | -| 03/26/2020 | | Multi-spark feature | -| 09/05/2019 | r19849 | Electronic Throttle Body including idle control seems to work | -| 07/28/2019 | r19612 | improvement #809: software jump to DFU | -| 04/25/2019 | r17317 | bugfix #775: electrical noise reboot during settings change causes with full tune loss | -| 04/07/2019 | r17098 | improvement #714: TLE8888 Enable Outputs SPI integration | -| 02/27/2019 | r16886 | bugfix #698: concurrency defect with single timer executor initialization | -| 02/23/2019 | r16857 | improvement #688: better support for 144 and 176 pin packages | -| 02/05/2019 | r16713 | improvement #631: ChibiOS 18 | -| 01/11/2019 | r16346 | bugfix #663: SPI fixes for CJ125 for stm32 errata STM32f405/7/15/17 | -| 12/09/2018 | r16057 | electronic throttle body control is now BETA version | -| 08/19/2018 | r15811 | bugfix #604: no interpolation outside of the table | -| 01/29/2018 | r15514 | improvement #215: CJ125 wideband controller | -| 01/23/2018 | r15442 | improvement #463: ChibiOS 17 / 4 | -| 01/07/2018 | r14952 | usability & minor bugfix #532 idle defaults are broken | -| 12/17/2017 | r14892 | bugfix #513: console: erase on older chips does not work | -| 11/26/2017 | r14789 | bugfix #500: set_rpn_expression command is broken | -| 11/23/2017 | r14779 | bugfix #497: engine does not start with SD card | -| 11/19/2017 | r14766 | improvement #496: console flasher to support older boards | -| 11/19/2017 | r14760 | improvement #495: incompatible change - larger settings area | -| 11/06/2017 | r14733 | improvement #487: single-point injection mode | -| 10/26/2017 | r14700 | improvement #385: narrow band to wide band conversion table | -| 08/31/2017 | | improvement #442: ADC_VCC should be configurable | -| 07/24/2017 | r14513 | bugfix #307: TS bench test blinks three times | -| 07/13/2017 | r14476 | bugfix #461: SAXParserException on console start-up due to damaged settings.xml file | -| 07/09/2017 | r14473 | improvement: IAC solenoid frequency changeable on the fly | -| 06/19/2017 | r14393 | bugfix: pinMode, milMode | -| 05/27/2017 | r14221 | improvement: ochGetCommand to support offset and count | -| 05/05/2017 | r13974 | bugfix #404: 36/1 FATAL error: angle range trgSync | -| 05/03/2017 | r13967 | improvement: ChibiOS 3.2 | -| 04/06/2017 | r13759 | major improvement #72: ChibiOS 3.1 | -| 03/26/2017 | r13330 | super annoying bug #336 fixed | -| 03/20/2017 | r13233 | improvements #375 & #376: hard FPU mode & migrating to fresh version of arm gcc | -| 03/19/2017 | r13223 | bugfix #374: persistent configuration starts to touch firmware - settings would need to be reloaded | -| 03/09/2017 | r13146 | bugfix #370: duty cycle vs error code 6050 | -| 03/06/2017 | r13123 | bugfix #363: 2/1 skipped wheel is a corner-case | -| 03/05/2017 | r13108 | bugfix #363: trigger front only processing | -| 02/22/2017 | r12980 | bugfix: false error message in case of single coil or simultaneous injection | -| 02/22/2017 | r12973 | unused property 'custom Use Rise Edge' removed | -| 02/22/2017 | r12972 | protocol signature changed to 'v0.02' (this would happen from time to time to ensure version match between console and TS project | -| 02/20/2017 | r12939 | https://github.com/rusefi/rusefi is now the official primary repository | -| 02/18/2017 | r11565 | improvement: level1 default brown out https://sourceforge.net/p/rusefi/tickets/354/ | -| 02/18/2017 | r11554 | bugfix: rusEfi console program/erase buttons fixed with ST-LINK 2.1 | -| 12/09/2016 | r10991 | bugfixes, bugfixes, bugfixes & release 1.0 -| 02/15/2016 | r9600 | automatic warm-up fuel correction, performance improvements -| 08/31/2015 | r8725 | acceleration fuel correction, console improvements -| 07/06/2015 | r8554 | more CAN, better console, bugfixes, performance -| 04/26/2015 | r7938 | vehicle speed sensor, stepper idle valve, lots of improvements -| 11/13/2014 | r5327 | ChibiOS/RT 2.6.6, better cold start logic, bugfixes, bugfixes, bugfixes... -| 06/12/2014 | r3477 | Precise event scheduling, protocol selection -| 03/26/2014 | r2413 | C++, refactoring & improvements -| 02/23/2013 | r1777 | trigger is now configurable via TunerStudio -| 01/30/2014 | r1309 | true trigger angles, VBatt signal -| 01/12/2014 | r1007 | refactoring, refactoring & refactoring -| 12/19/2013 | r605 | ignition control & a little bit of CAN bus -| 11/08/2013 | r100 | Tuner Studio fuel map tuning, fuel pump control -| 10/14/2013 | r39 | USB serial bug, missing IAR files, self-contained Makefile -| 10/13/2013 | r33 | IAR project file -| 10/04/2013 | r26 | Patched ChibiOS/RT 2.6.1 sources are now included -| 09/23/2013 | r20 | Tuner Studio integration, configuration persistence -| 08/30/2013 | r14 | initial documentation & refactoring. tunerstudio integration -| 08/03/2013 | r13 | wideband O2 input, better idling algorithm, serial-over-USB -| 07/05/2013 | r10 | Second CKP, sequential injection. -| 06/19/2013 | r9 | Initial version - batch injection & ignition with advance table lookup. +See [the changelog](firmware/CHANGELOG.md) diff --git a/firmware/CHANGELOG.md b/firmware/CHANGELOG.md index 465e9ea275..7c0be03639 100644 --- a/firmware/CHANGELOG.md +++ b/firmware/CHANGELOG.md @@ -257,3 +257,79 @@ All notable user-facing or behavior-altering changes will be documented in this - Fixed fuel pump logic - Improve trigger input/decode and PWM performance - Fixes to SD card logging + + +# Old Changelog + +| Release date | Revision | Details | +| ------------ | --------- | ------- | +| 07/26/2020 | r24635 | improvement #1637: DC motor idle air valve for late 90s German vehicles | +| 07/21/2020 | | bugfix #1592 injectors could stay open on transition from cranking to running under certain conditions | +| 06/17/2020 | r23656 | bugfix #1491 major performance/scheduling improvement | +| 05/21/2020 | r22961 | rusEFI console start-up time improvements | +| 04/18/2020 | r22231 | Renix 44-2-2 trigger support added | +| 04/02/2020 | | Start button feature | +| 03/28/2020 | | Critical error text is now displayed in TunerStudio | +| 03/26/2020 | | Multi-spark feature | +| 09/05/2019 | r19849 | Electronic Throttle Body including idle control seems to work | +| 07/28/2019 | r19612 | improvement #809: software jump to DFU | +| 04/25/2019 | r17317 | bugfix #775: electrical noise reboot during settings change causes with full tune loss | +| 04/07/2019 | r17098 | improvement #714: TLE8888 Enable Outputs SPI integration | +| 02/27/2019 | r16886 | bugfix #698: concurrency defect with single timer executor initialization | +| 02/23/2019 | r16857 | improvement #688: better support for 144 and 176 pin packages | +| 02/05/2019 | r16713 | improvement #631: ChibiOS 18 | +| 01/11/2019 | r16346 | bugfix #663: SPI fixes for CJ125 for stm32 errata STM32f405/7/15/17 | +| 12/09/2018 | r16057 | electronic throttle body control is now BETA version | +| 08/19/2018 | r15811 | bugfix #604: no interpolation outside of the table | +| 01/29/2018 | r15514 | improvement #215: CJ125 wideband controller | +| 01/23/2018 | r15442 | improvement #463: ChibiOS 17 / 4 | +| 01/07/2018 | r14952 | usability & minor bugfix #532 idle defaults are broken | +| 12/17/2017 | r14892 | bugfix #513: console: erase on older chips does not work | +| 11/26/2017 | r14789 | bugfix #500: set_rpn_expression command is broken | +| 11/23/2017 | r14779 | bugfix #497: engine does not start with SD card | +| 11/19/2017 | r14766 | improvement #496: console flasher to support older boards | +| 11/19/2017 | r14760 | improvement #495: incompatible change - larger settings area | +| 11/06/2017 | r14733 | improvement #487: single-point injection mode | +| 10/26/2017 | r14700 | improvement #385: narrow band to wide band conversion table | +| 08/31/2017 | | improvement #442: ADC_VCC should be configurable | +| 07/24/2017 | r14513 | bugfix #307: TS bench test blinks three times | +| 07/13/2017 | r14476 | bugfix #461: SAXParserException on console start-up due to damaged settings.xml file | +| 07/09/2017 | r14473 | improvement: IAC solenoid frequency changeable on the fly | +| 06/19/2017 | r14393 | bugfix: pinMode, milMode | +| 05/27/2017 | r14221 | improvement: ochGetCommand to support offset and count | +| 05/05/2017 | r13974 | bugfix #404: 36/1 FATAL error: angle range trgSync | +| 05/03/2017 | r13967 | improvement: ChibiOS 3.2 | +| 04/06/2017 | r13759 | major improvement #72: ChibiOS 3.1 | +| 03/26/2017 | r13330 | super annoying bug #336 fixed | +| 03/20/2017 | r13233 | improvements #375 & #376: hard FPU mode & migrating to fresh version of arm gcc | +| 03/19/2017 | r13223 | bugfix #374: persistent configuration starts to touch firmware - settings would need to be reloaded | +| 03/09/2017 | r13146 | bugfix #370: duty cycle vs error code 6050 | +| 03/06/2017 | r13123 | bugfix #363: 2/1 skipped wheel is a corner-case | +| 03/05/2017 | r13108 | bugfix #363: trigger front only processing | +| 02/22/2017 | r12980 | bugfix: false error message in case of single coil or simultaneous injection | +| 02/22/2017 | r12973 | unused property 'custom Use Rise Edge' removed | +| 02/22/2017 | r12972 | protocol signature changed to 'v0.02' (this would happen from time to time to ensure version match between console and TS project | +| 02/20/2017 | r12939 | https://github.com/rusefi/rusefi is now the official primary repository | +| 02/18/2017 | r11565 | improvement: level1 default brown out https://sourceforge.net/p/rusefi/tickets/354/ | +| 02/18/2017 | r11554 | bugfix: rusEfi console program/erase buttons fixed with ST-LINK 2.1 | +| 12/09/2016 | r10991 | bugfixes, bugfixes, bugfixes & release 1.0 +| 02/15/2016 | r9600 | automatic warm-up fuel correction, performance improvements +| 08/31/2015 | r8725 | acceleration fuel correction, console improvements +| 07/06/2015 | r8554 | more CAN, better console, bugfixes, performance +| 04/26/2015 | r7938 | vehicle speed sensor, stepper idle valve, lots of improvements +| 11/13/2014 | r5327 | ChibiOS/RT 2.6.6, better cold start logic, bugfixes, bugfixes, bugfixes... +| 06/12/2014 | r3477 | Precise event scheduling, protocol selection +| 03/26/2014 | r2413 | C++, refactoring & improvements +| 02/23/2013 | r1777 | trigger is now configurable via TunerStudio +| 01/30/2014 | r1309 | true trigger angles, VBatt signal +| 01/12/2014 | r1007 | refactoring, refactoring & refactoring +| 12/19/2013 | r605 | ignition control & a little bit of CAN bus +| 11/08/2013 | r100 | Tuner Studio fuel map tuning, fuel pump control +| 10/14/2013 | r39 | USB serial bug, missing IAR files, self-contained Makefile +| 10/13/2013 | r33 | IAR project file +| 10/04/2013 | r26 | Patched ChibiOS/RT 2.6.1 sources are now included +| 09/23/2013 | r20 | Tuner Studio integration, configuration persistence +| 08/30/2013 | r14 | initial documentation & refactoring. tunerstudio integration +| 08/03/2013 | r13 | wideband O2 input, better idling algorithm, serial-over-USB +| 07/05/2013 | r10 | Second CKP, sequential injection. +| 06/19/2013 | r9 | Initial version - batch injection & ignition with advance table lookup.