rusefi
/
custom-board-bundle-sample-fork-of-rusefi
mirror of https://github.com/rusefi/custom-board-bundle-sample-fork-of-rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Auto-generated configs and docs

This commit is contained in:
GitHub build-firmware Action 2021-09-06 00:26:59 +00:00
parent 36792f55b5
commit 7ea3f337ee
55 changed files with 316 additions and 316 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
firmware/config/boards/hellen/cypress/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Sep 03 10:34:25 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Mon Sep 06 00:25:57 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -189,13 +189,13 @@ struct gppwm_channel {
*/
uint16_t pwmFrequency;
/**
* In on-off mode, turn the output on when the table value is above this duty.
* Hysteresis: in on-off mode, turn the output on when the table value is above this duty.
%
* offset 4
*/
uint8_t onAboveDuty;
/**
* In on-off mode, turn the output off when the table value is below this duty.
* Hysteresis: in on-off mode, turn the output off when the table value is below this duty.
%
* offset 5
*/
@ -4333,4 +4333,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Sep 03 10:34:25 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Mon Sep 06 00:25:57 UTC 2021

6
firmware/config/boards/hellen/cypress/config/controllers/algo/rusefi_generated.h
View File

@ -1266,8 +1266,8 @@
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_BOARD hellen_cypress
#define SIGNATURE_DATE 2021.09.03
#define SIGNATURE_HASH 954581760
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 1014445902
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -1623,7 +1623,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2021.09.03.hellen_cypress.954581760"
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen_cypress.1014445902"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

8
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Sep 03 10:34:23 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Mon Sep 06 00:25:55 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -189,13 +189,13 @@ struct gppwm_channel {
*/
uint16_t pwmFrequency;
/**
* In on-off mode, turn the output on when the table value is above this duty.
* Hysteresis: in on-off mode, turn the output on when the table value is above this duty.
%
* offset 4
*/
uint8_t onAboveDuty;
/**
* In on-off mode, turn the output off when the table value is below this duty.
* Hysteresis: in on-off mode, turn the output off when the table value is below this duty.
%
* offset 5
*/
@ -4327,4 +4327,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Sep 03 10:34:23 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Mon Sep 06 00:25:55 UTC 2021

6
firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
View File

@ -1247,8 +1247,8 @@
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_BOARD kin
#define SIGNATURE_DATE 2021.09.03
#define SIGNATURE_HASH 3342864380
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3285384114
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -1604,7 +1604,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator true
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2021.09.03.kin.3342864380"
#define TS_SIGNATURE "rusEFI 2021.09.06.kin.3285384114"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

8
firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:27 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:26:00 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -189,13 +189,13 @@ struct gppwm_channel {
*/
uint16_t pwmFrequency;
/**
* In on-off mode, turn the output on when the table value is above this duty.
* Hysteresis: in on-off mode, turn the output on when the table value is above this duty.
%
* offset 4
*/
uint8_t onAboveDuty;
/**
* In on-off mode, turn the output off when the table value is below this duty.
* Hysteresis: in on-off mode, turn the output off when the table value is below this duty.
%
* offset 5
*/
@ -4333,4 +4333,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:27 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:26:00 UTC 2021

6
firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
View File

@ -1267,8 +1267,8 @@
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_BOARD subaru_eg33_f7
#define SIGNATURE_DATE 2021.09.03
#define SIGNATURE_HASH 4011062195
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3951101949
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -1624,7 +1624,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port false
#define TS_SIGNATURE "rusEFI 2021.09.03.subaru_eg33_f7.4011062195"
#define TS_SIGNATURE "rusEFI 2021.09.06.subaru_eg33_f7.3951101949"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

8
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -189,13 +189,13 @@ struct gppwm_channel {
*/
uint16_t pwmFrequency;
/**
* In on-off mode, turn the output on when the table value is above this duty.
* Hysteresis: in on-off mode, turn the output on when the table value is above this duty.
%
* offset 4
*/
uint8_t onAboveDuty;
/**
* In on-off mode, turn the output off when the table value is below this duty.
* Hysteresis: in on-off mode, turn the output off when the table value is below this duty.
%
* offset 5
*/
@ -4333,4 +4333,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021

2
firmware/controllers/generated/fsio_enums_generated.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
FSIO_SETTING_ACIDLEEXTRAOFFSET = 1000,

2
firmware/controllers/generated/fsio_getters.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
case FSIO_SETTING_ACIDLEEXTRAOFFSET:

2
firmware/controllers/generated/fsio_names.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
static LENameOrdinalPair leacIdleExtraOffset(FSIO_SETTING_ACIDLEEXTRAOFFSET, "cfg_acIdleExtraOffset");

2
firmware/controllers/generated/fsio_strings.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
case FSIO_SETTING_ACIDLEEXTRAOFFSET:

6
firmware/controllers/generated/rusefi_generated.h
View File

@ -1266,8 +1266,8 @@
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_BOARD all
#define SIGNATURE_DATE 2021.09.03
#define SIGNATURE_HASH 2056853712
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2114710686
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -1623,7 +1623,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2021.09.03.all.2056853712"
#define TS_SIGNATURE "rusEFI 2021.09.06.all.2114710686"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

6
firmware/controllers/generated/signature_all.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD all
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 4196225908
#define TS_SIGNATURE "rusEFI 2021.09.05.all.4196225908"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2114710686
#define TS_SIGNATURE "rusEFI 2021.09.06.all.2114710686"

6
firmware/controllers/generated/signature_atlas.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD atlas
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 4196225908
#define TS_SIGNATURE "rusEFI 2021.09.05.atlas.4196225908"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2114710686
#define TS_SIGNATURE "rusEFI 2021.09.06.atlas.2114710686"

6
firmware/controllers/generated/signature_f429-discovery.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD f429-discovery
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 4196225908
#define TS_SIGNATURE "rusEFI 2021.09.05.f429-discovery.4196225908"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2114710686
#define TS_SIGNATURE "rusEFI 2021.09.06.f429-discovery.2114710686"

6
firmware/controllers/generated/signature_frankenso_na6.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD frankenso_na6
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 2150565533
#define TS_SIGNATURE "rusEFI 2021.09.05.frankenso_na6.2150565533"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 70891895
#define TS_SIGNATURE "rusEFI 2021.09.06.frankenso_na6.70891895"

6
firmware/controllers/generated/signature_hellen-nb1.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen-nb1
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 1411270872
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen-nb1.1411270872"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3490248498
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen-nb1.3490248498"

6
firmware/controllers/generated/signature_hellen121nissan.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen121nissan
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 133825010
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen121nissan.133825010"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2213330456
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen121nissan.2213330456"

6
firmware/controllers/generated/signature_hellen121vag.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen121vag
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 2851189554
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen121vag.2851189554"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 770116824
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen121vag.770116824"

6
firmware/controllers/generated/signature_hellen128.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen128
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 3011777985
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen128.3011777985"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 932358699
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen128.932358699"

6
firmware/controllers/generated/signature_hellen154hyundai.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen154hyundai
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 3619548302
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen154hyundai.3619548302"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 1403736932
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen154hyundai.1403736932"

6
firmware/controllers/generated/signature_hellen72.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen72
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 2626171731
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen72.2626171731"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 413043897
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen72.413043897"

6
firmware/controllers/generated/signature_hellenNA6.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellenNA6
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 613768835
#define TS_SIGNATURE "rusEFI 2021.09.05.hellenNA6.613768835"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2692997481
#define TS_SIGNATURE "rusEFI 2021.09.06.hellenNA6.2692997481"

6
firmware/controllers/generated/signature_hellen_cypress.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD hellen_cypress
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 3093399716
#define TS_SIGNATURE "rusEFI 2021.09.05.hellen_cypress.3093399716"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 1014445902
#define TS_SIGNATURE "rusEFI 2021.09.06.hellen_cypress.1014445902"

6
firmware/controllers/generated/signature_kin.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD kin
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 1204044888
#define TS_SIGNATURE "rusEFI 2021.09.05.kin.1204044888"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3285384114
#define TS_SIGNATURE "rusEFI 2021.09.06.kin.3285384114"

6
firmware/controllers/generated/signature_mre_f4.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD mre_f4
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 1697267839
#define TS_SIGNATURE "rusEFI 2021.09.05.mre_f4.1697267839"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3778871189
#define TS_SIGNATURE "rusEFI 2021.09.06.mre_f4.3778871189"

6
firmware/controllers/generated/signature_mre_f7.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD mre_f7
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 1697267839
#define TS_SIGNATURE "rusEFI 2021.09.05.mre_f7.1697267839"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3778871189
#define TS_SIGNATURE "rusEFI 2021.09.06.mre_f7.3778871189"

6
firmware/controllers/generated/signature_prometheus_405.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD prometheus_405
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 2868349586
#define TS_SIGNATURE "rusEFI 2021.09.05.prometheus_405.2868349586"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 786511224
#define TS_SIGNATURE "rusEFI 2021.09.06.prometheus_405.786511224"

6
firmware/controllers/generated/signature_prometheus_469.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD prometheus_469
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 2868349586
#define TS_SIGNATURE "rusEFI 2021.09.05.prometheus_469.2868349586"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 786511224
#define TS_SIGNATURE "rusEFI 2021.09.06.prometheus_469.786511224"

6
firmware/controllers/generated/signature_proteus_f4.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD proteus_f4
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 484138450
#define TS_SIGNATURE "rusEFI 2021.09.05.proteus_f4.484138450"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2563629624
#define TS_SIGNATURE "rusEFI 2021.09.06.proteus_f4.2563629624"

6
firmware/controllers/generated/signature_proteus_f7.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD proteus_f7
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 484138450
#define TS_SIGNATURE "rusEFI 2021.09.05.proteus_f7.484138450"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 2563629624
#define TS_SIGNATURE "rusEFI 2021.09.06.proteus_f7.2563629624"

6
firmware/controllers/generated/signature_subaru_eg33_f7.h
View File

@ -3,6 +3,6 @@
//
#define SIGNATURE_BOARD subaru_eg33_f7
#define SIGNATURE_DATE 2021.09.05
#define SIGNATURE_HASH 1872214039
#define TS_SIGNATURE "rusEFI 2021.09.05.subaru_eg33_f7.1872214039"
#define SIGNATURE_DATE 2021.09.06
#define SIGNATURE_HASH 3951101949
#define TS_SIGNATURE "rusEFI 2021.09.06.subaru_eg33_f7.3951101949"

BIN
firmware/tunerstudio/generated/cache.zip
View File

Binary file not shown.

22
firmware/tunerstudio/generated/rusefi.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.all.4196225908"
signature = "rusEFI 2021.09.06.all.2114710686"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.all.4196225908" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.all.2114710686" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:56 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_atlas.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.atlas.4196225908"
signature = "rusEFI 2021.09.06.atlas.2114710686"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.atlas.4196225908" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.atlas.2114710686" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:54 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:50 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_f429-discovery.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.f429-discovery.4196225908"
signature = "rusEFI 2021.09.06.f429-discovery.2114710686"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.f429-discovery.4196225908" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.f429-discovery.2114710686" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:23 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:05 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.frankenso_na6.2150565533"
signature = "rusEFI 2021.09.06.frankenso_na6.70891895"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.frankenso_na6.2150565533" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.frankenso_na6.70891895" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:44 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:35 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen-nb1.1411270872"
signature = "rusEFI 2021.09.06.hellen-nb1.3490248498"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen-nb1.1411270872" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen-nb1.3490248498" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:35 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:23 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen121nissan.133825010"
signature = "rusEFI 2021.09.06.hellen121nissan.2213330456"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen121nissan.133825010" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen121nissan.2213330456" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:29 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:14 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen121vag.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen121vag.2851189554"
signature = "rusEFI 2021.09.06.hellen121vag.770116824"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen121vag.2851189554" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen121vag.770116824" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:27 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:12 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen128.3011777985"
signature = "rusEFI 2021.09.06.hellen128.932358699"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen128.3011777985" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen128.932358699" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:25 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:09 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen154hyundai.3619548302"
signature = "rusEFI 2021.09.06.hellen154hyundai.1403736932"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen154hyundai.3619548302" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen154hyundai.1403736932" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:31 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:18 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen72.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen72.2626171731"
signature = "rusEFI 2021.09.06.hellen72.413043897"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen72.2626171731" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen72.413043897" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:33 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:20 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellenNA6.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellenNA6.613768835"
signature = "rusEFI 2021.09.06.hellenNA6.2692997481"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellenNA6.613768835" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellenNA6.2692997481" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:38 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:26 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_hellen_cypress.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.hellen_cypress.3093399716"
signature = "rusEFI 2021.09.06.hellen_cypress.1014445902"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.hellen_cypress.3093399716" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.hellen_cypress.1014445902" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sun Sep 05 19:05:00 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Mon Sep 06 00:25:57 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_kinetis.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.kin.1204044888"
signature = "rusEFI 2021.09.06.kin.3285384114"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.kin.1204044888" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.kin.3285384114" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sun Sep 05 19:04:58 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Mon Sep 06 00:25:55 UTC 2021
pageSize = 19972
page = 1
@ -1492,26 +1492,26 @@ fsioTable4RpmBins = array, F32, 19940, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_mre_f4.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.mre_f4.1697267839"
signature = "rusEFI 2021.09.06.mre_f4.3778871189"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.mre_f4.1697267839" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.mre_f4.3778871189" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:42 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:32 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_mre_f7.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.mre_f7.1697267839"
signature = "rusEFI 2021.09.06.mre_f7.3778871189"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.mre_f7.1697267839" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.mre_f7.3778871189" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:40 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:29 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_prometheus_405.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.prometheus_405.2868349586"
signature = "rusEFI 2021.09.06.prometheus_405.786511224"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.prometheus_405.2868349586" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.prometheus_405.786511224" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:48 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:41 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_prometheus_469.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.prometheus_469.2868349586"
signature = "rusEFI 2021.09.06.prometheus_469.786511224"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.prometheus_469.2868349586" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.prometheus_469.786511224" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:46 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:38 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_proteus_f4.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.proteus_f4.484138450"
signature = "rusEFI 2021.09.06.proteus_f4.2563629624"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.proteus_f4.484138450" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.proteus_f4.2563629624" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:52 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:47 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_proteus_f7.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.proteus_f7.484138450"
signature = "rusEFI 2021.09.06.proteus_f7.2563629624"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.proteus_f7.484138450" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.proteus_f7.2563629624" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:04:50 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:44 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

22
firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
View File

@ -33,12 +33,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.09.05.subaru_eg33_f7.1872214039"
signature = "rusEFI 2021.09.06.subaru_eg33_f7.3951101949"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.09.05.subaru_eg33_f7.1872214039" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.09.06.subaru_eg33_f7.3951101949" ; signature is expected to be 7 or more characters.
[Constants]
; new packet serial format with CRC
@ -77,7 +77,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Sun Sep 05 19:05:02 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:26:00 UTC 2021
pageSize = 20000
page = 1
@ -1520,26 +1520,26 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
gppwm1_pin = "Select a pin to use for PWM or on-off output."
gppwm1_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm1_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm1_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm1_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm1_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm1_loadAxis = "Selects the load axis to use for the table."
gppwm2_pin = "Select a pin to use for PWM or on-off output."
gppwm2_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm2_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm2_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm2_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm2_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm2_loadAxis = "Selects the load axis to use for the table."
gppwm3_pin = "Select a pin to use for PWM or on-off output."
gppwm3_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm3_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm3_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm3_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm3_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm3_loadAxis = "Selects the load axis to use for the table."
gppwm4_pin = "Select a pin to use for PWM or on-off output."
gppwm4_dutyIfError = "If an error (with a sensor, etc) is detected, this value is used instead of reading from the table.\nThis should be a safe value for whatever hardware is connected to prevent damage."
gppwm4_pwmFrequency = "Select a frequency to run PWM at.\nSet this to 0hz to enable on-off mode."
gppwm4_onAboveDuty = "In on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "In on-off mode, turn the output off when the table value is below this duty."
gppwm4_onAboveDuty = "Hysteresis: in on-off mode, turn the output on when the table value is above this duty."
gppwm4_offBelowDuty = "Hysteresis: in on-off mode, turn the output off when the table value is below this duty."
gppwm4_loadAxis = "Selects the load axis to use for the table."
vssFilterReciprocal = "Good example: number of tooth on wheel, For Can 10 is a good number."

6
java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Sep 03 10:34:20 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Mon Sep 06 00:25:52 UTC 2021
// by class com.rusefi.output.FileJavaFieldsConsumer
import com.rusefi.config.*;
@ -1219,7 +1219,7 @@ public class Fields {
public static final int servoOutputPins8_offset = 3147;
public static final int showHumanReadableWarning_offset = 976;
public static final int showSdCardWarning_offset = 76;
public static final int SIGNATURE_HASH = 2056853712;
public static final int SIGNATURE_HASH = 2114710686;
public static final int silentTriggerError_offset = 1464;
public static final int slowAdcAlpha_offset = 2088;
public static final int sparkDwellRpmBins_offset = 332;
@ -1526,7 +1526,7 @@ public class Fields {
public static final int TS_RESPONSE_UNDERRUN = 0x80;
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
public static final char TS_SET_LOGGER_SWITCH = 'l';
public static final String TS_SIGNATURE = "rusEFI 2021.09.03.all.2056853712";
public static final String TS_SIGNATURE = "rusEFI 2021.09.06.all.2114710686";
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
public static final char TS_TEST_COMMAND = 't';
public static final int TT_TT_1_16 = 50;

2
java_console/rusefi.xml
View File

@ -1,6 +1,6 @@
<roms>
<!-- was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh Fri Sep 03 10:34:22 UTC 2021 -->
<!-- was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh Mon Sep 06 00:25:54 UTC 2021 -->
<rom>
<romid>