rename setBoardConfigurationOverrides (#2479)

* rename

* proteus

* comments

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>

firmware/config/boards/hellen/hellen72/board_configuration.cpp

@@ -129,13 +129,13 @@ void setSerialConfigurationOverrides(void) {
 
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  *
  * See also setDefaultEngineConfiguration
  *
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 	setInjectorPins();
 	setIgnitionPins();
 	setLedPins();

firmware/config/boards/me7_pnp/board_configuration.cpp

@@ -40,7 +40,7 @@ void setPinConfigurationOverrides(void) {
 	engineConfiguration->fanPin = GPIO_UNASSIGNED;
 
 }
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 
 	// NOT USED
 	engineConfiguration->externalKnockSenseAdc = EFI_ADC_NONE;

firmware/config/boards/microrusefi/board_configuration.cpp

@@ -190,13 +190,13 @@ void setSerialConfigurationOverrides(void) {
 
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  *
  * See also setDefaultEngineConfiguration
  *
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 	setInjectorPins();
 	setIgnitionPins();
 	setLedPins();

firmware/config/boards/nucleo_f767/board_configuration.cpp

@@ -37,10 +37,10 @@ void setSdCardConfigurationOverrides(void) {
 }
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 	setSerialConfigurationOverrides();
 
 	engineConfiguration->runningLedPin = GPIOB_0; //green LED

firmware/config/boards/nucleo_h743/board_configuration.cpp

@@ -1,10 +1,10 @@
 #include "adc_inputs.h"
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 }
 
 /**

firmware/config/boards/prometheus/board_configuration.cpp

@@ -128,10 +128,10 @@ void setSdCardConfigurationOverrides(void) {
 }
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 	// give a chance to trigger SWD programmer... Wait for 2 secs (=2000 ms).
 	// TODO: remove it when the bootloader is ready
 	chThdSleepMilliseconds(2000);

firmware/config/boards/proteus/board_configuration.cpp

@@ -176,13 +176,13 @@ void setSerialConfigurationOverrides(void) {
 
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  *
  * See also setDefaultEngineConfiguration
  *
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 	setInjectorPins();
 	setIgnitionPins();
 	setLedPins();

firmware/config/boards/st_stm32f4/board_extra.c

@@ -5,10 +5,10 @@
 #include "chconf_common.h"
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 }
 
 /**

firmware/config/boards/subaru_eg33/board_configuration.cpp

@@ -40,10 +40,10 @@ void setSdCardConfigurationOverrides(void) {
 }
 
 /**
- * @brief   Board-specific configuration code overrides.
+ * @brief   Board-specific configuration defaults.
  * @todo    Add your board-specific code, if any.
  */
-void setBoardConfigurationOverrides(void) {
+void setBoardDefaultConfiguration(void) {
 	setSerialConfigurationOverrides();
 
 	/* Battery voltage */

firmware/controllers/algo/engine_configuration.cpp

@@ -1144,7 +1144,7 @@ void resetConfigurationExt(Logging * logger, configuration_callback_t boardCallb
 
 #if EFI_PROD_CODE
 	// call overrided board-specific configuration setup, if needed (for custom boards only)
-	setBoardConfigurationOverrides();
+	setBoardDefaultConfiguration();
 #endif
 
 	engineConfiguration->engineType = engineType;
@@ -1159,7 +1159,7 @@ void resetConfigurationExt(Logging * logger, configuration_callback_t boardCallb
 	case PROMETHEUS_DEFAULTS:
 	case MINIMAL_PINS:
 		// all basic settings are already set in prepareVoidConfiguration(), no need to set anything here
-		// nothing to do - we do it all in setBoardConfigurationOverrides
+		// nothing to do - we do it all in setBoardDefaultConfiguration
 		break;
 	case TEST_ENGINE:
 		setTestEngineConfiguration(PASS_CONFIG_PARAMETER_SIGNATURE);

firmware/hw_layer/ports/chconf_common.h

@@ -50,7 +50,7 @@ extern "C"
 extern "C" {
 #endif
   void boardInit(void);
-  void setBoardConfigurationOverrides(void);
+  void setBoardDefaultConfiguration(void);
   void setPinConfigurationOverrides(void);
   void setSerialConfigurationOverrides(void);
   void setSdCardConfigurationOverrides(void);