auto-sync

firmware/console/tunerstudio/tunerstudio.cpp

@@ -111,8 +111,8 @@ extern board_configuration_s *boardConfiguration;
 static void printStats(void) {
 #if EFI_PROD_CODE
 	if (!isSerialOverUart()) {
-		scheduleMsg(&logger, "TS RX on %s%d/TX on %s%d", portname(TS_SERIAL_RX_PORT), TS_SERIAL_RX_PIN,
+		scheduleMsg(&logger, "TS RX on %s%d/TX on %s%d @%d", portname(TS_SERIAL_RX_PORT), TS_SERIAL_RX_PIN,
-				portname(TS_SERIAL_TX_PORT), TS_SERIAL_TX_PIN);
+				portname(TS_SERIAL_TX_PORT), TS_SERIAL_TX_PIN, TS_SERIAL_SPEED);
 	}
 #endif /* EFI_PROD_CODE */
 	scheduleMsg(&logger, "TunerStudio total/error counter=%d/%d H=%d / O counter=%d size=%d / P=%d / B=%d", tsCounter, tsState.errorCounter, tsState.queryCommandCounter, tsState.outputChannelsCommandCounter,

firmware/controllers/trigger/trigger_central.cpp

@@ -216,7 +216,8 @@ static void triggerInfo(Engine *engine) {
 	scheduleMsg(&logger, "expected duty #0=%f/#1=%f", engineConfiguration2->triggerShape.dutyCycle[0],
 			engineConfiguration2->triggerShape.dutyCycle[1]);
 
-	scheduleMsg(&logger, "isError %d/total errors=%d/total revolutions=%d", isTriggerDecoderError(),
+	scheduleMsg(&logger, "isError %s/total errors=%d/total revolutions=%d",
+			boolToString(isTriggerDecoderError()),
 			triggerCentral.triggerState.totalTriggerErrorCounter,
 			triggerCentral.triggerState.getTotalRevolutionCounter());
 

firmware/controllers/trigger/trigger_decoder.cpp

@@ -46,7 +46,7 @@ Logging logger;
 /**
  * @return TRUE is something is wrong with trigger decoding
  */
-int isTriggerDecoderError(void) {
+bool_t isTriggerDecoderError(void) {
 	return errorDetection.sum(6) > 4;
 }
 

firmware/controllers/trigger/trigger_decoder.h

@@ -83,6 +83,6 @@ uint32_t findTriggerZeroEventIndex(trigger_shape_s * shape, trigger_config_s con
 void initializeTriggerShape(Logging *logger, engine_configuration_s const *engineConfiguration, engine_configuration2_s *engineConfiguration2);
 void initTriggerDecoder(void);
 
-int isTriggerDecoderError(void);
+bool_t isTriggerDecoderError(void);
 
 #endif /* TRIGGER_DECODER_H_ */

firmware/rusefi.cpp

@@ -252,5 +252,5 @@ void firmwareError(const char *fmt, ...) {
 }
 
 int getRusEfiVersion(void) {
-	return 20141113;
+	return 20141114;
 }

hardware/frankenso/frankenso.kicad_pcb

@@ -15,7 +15,7 @@
   (page B)
   (title_block 
     (title Frankenso)
-    (rev R.02)
+    (rev R.03)
     (company http://rusefi.com/)
   )
 
@@ -885,6 +885,43 @@
     (add_net /stm32f407_board/PA12)
   )
 
+  (module SMDSVP10 (layer F.Cu) (tedit 53A60C7A) (tstamp 533A91F4)
+    (at 131.445 60.96 90)
+    (path /539DA32A/51297942)
+    (attr smd)
+    (fp_text reference C1001 (at 0 -2.159 90) (layer F.SilkS)
+      (effects (font (size 1.016 1.00076) (thickness 0.15748)))
+    )
+    (fp_text value "470uF 25V" (at 0 2.79908 90) (layer F.SilkS) hide
+      (effects (font (size 1.016 1.00076) (thickness 0.2032)))
+    )
+    (fp_line (start -5.461 4.191) (end -5.461 1.397) (layer F.SilkS) (width 0.2032))
+    (fp_line (start -5.461 -4.191) (end -5.461 -1.397) (layer F.SilkS) (width 0.2032))
+    (fp_line (start 5.461 5.207) (end 5.461 1.397) (layer F.SilkS) (width 0.2032))
+    (fp_line (start 5.461 -5.207) (end 5.461 -1.397) (layer F.SilkS) (width 0.2032))
+    (fp_text user + (at -3.683 1.905 90) (layer F.SilkS)
+      (effects (font (size 1.524 1.524) (thickness 0.3048)))
+    )
+    (fp_circle (center 0 0) (end 4.89966 0) (layer F.SilkS) (width 0.2032))
+    (fp_line (start 5.4991 -5.19938) (end -4.50088 -5.19938) (layer F.SilkS) (width 0.2032))
+    (fp_line (start -4.50088 -5.19938) (end -5.4991 -4.20116) (layer F.SilkS) (width 0.2032))
+    (fp_line (start -5.4991 4.20116) (end -4.50088 5.19938) (layer F.SilkS) (width 0.2032))
+    (fp_line (start -4.50088 5.19938) (end 5.4991 5.19938) (layer F.SilkS) (width 0.2032))
+    (pad 1 smd rect (at -4.39928 0 90) (size 4.39928 1.89992)
+      (layers F.Cu F.Paste F.Mask)
+      (net 12 /PWR_buck_12V_switcher/VBAT)
+    )
+    (pad 2 smd rect (at 4.30022 0 90) (size 4.39928 1.89992)
+      (layers F.Cu F.Paste F.Mask)
+      (net 156 GND)
+    )
+    (model smd\capacitors\c_elec_10x10_5.wrl
+      (at (xyz 0 0 0.001))
+      (scale (xyz 1 1 1))
+      (rotate (xyz 0 0 180))
+    )
+  )
+
   (module DISPLAY_4x20_BL (layer F.Cu) (tedit 53E5746E) (tstamp 539AC44C)
     (at 176.53 106.045 270)
     (descr "Connecteur 16 pins")
@@ -7982,43 +8019,6 @@
     )
   )
 
-  (module SMDSVP10 (layer F.Cu) (tedit 53A60C7A) (tstamp 533A91F4)
-    (at 131.445 60.96 90)
-    (path /539DA32A/51297942)
-    (attr smd)
-    (fp_text reference C1001 (at 0 -2.159 90) (layer F.SilkS)
-      (effects (font (size 1.016 1.00076) (thickness 0.15748)))
-    )
-    (fp_text value "470uF 25V" (at 0 2.79908 90) (layer F.SilkS) hide
-      (effects (font (size 1.016 1.00076) (thickness 0.2032)))
-    )
-    (fp_line (start -5.461 4.191) (end -5.461 1.397) (layer F.SilkS) (width 0.2032))
-    (fp_line (start -5.461 -4.191) (end -5.461 -1.397) (layer F.SilkS) (width 0.2032))
-    (fp_line (start 5.461 5.207) (end 5.461 1.397) (layer F.SilkS) (width 0.2032))
-    (fp_line (start 5.461 -5.207) (end 5.461 -1.397) (layer F.SilkS) (width 0.2032))
-    (fp_text user + (at -3.683 1.905 90) (layer F.SilkS)
-      (effects (font (size 1.524 1.524) (thickness 0.3048)))
-    )
-    (fp_circle (center 0 0) (end 4.89966 0) (layer F.SilkS) (width 0.2032))
-    (fp_line (start 5.4991 -5.19938) (end -4.50088 -5.19938) (layer F.SilkS) (width 0.2032))
-    (fp_line (start -4.50088 -5.19938) (end -5.4991 -4.20116) (layer F.SilkS) (width 0.2032))
-    (fp_line (start -5.4991 4.20116) (end -4.50088 5.19938) (layer F.SilkS) (width 0.2032))
-    (fp_line (start -4.50088 5.19938) (end 5.4991 5.19938) (layer F.SilkS) (width 0.2032))
-    (pad 1 smd rect (at -4.39928 0 90) (size 4.39928 1.89992)
-      (layers F.Cu F.Paste F.Mask)
-      (net 12 /PWR_buck_12V_switcher/VBAT)
-    )
-    (pad 2 smd rect (at 4.30022 0 90) (size 4.39928 1.89992)
-      (layers F.Cu F.Paste F.Mask)
-      (net 156 GND)
-    )
-    (model smd\capacitors\c_elec_10x10_5.wrl
-      (at (xyz 0 0 0.001))
-      (scale (xyz 1 1 1))
-      (rotate (xyz 0 0 0))
-    )
-  )
-
   (module SM0805 (layer F.Cu) (tedit 53A60CAA) (tstamp 533A9B6E)
     (at 127.1425 75.0825)
     (path /539DA32A/533A08F3)
@@ -22709,7 +22709,7 @@
     (arrow2a (pts (xy 251.206 215.264999) (xy 250.079497 214.678579)))
     (arrow2b (pts (xy 251.206 215.264999) (xy 250.079497 215.851419)))
   )
-  (gr_text "Frankenso 0.2" (at 115.57 162.56 90) (layer F.SilkS)
+  (gr_text "Frankenso 0.3" (at 115.57 162.56 90) (layer F.SilkS)
     (effects (font (size 1.5 1.5) (thickness 0.3)))
   )
   (gr_line (start 220 192.024) (end 120 192.024) (angle 90) (layer Eco1.User) (width 0.1))
@@ -23472,7 +23472,7 @@
   (gr_text GND (at 151.765 102.87) (layer F.SilkS)
     (effects (font (size 0.7 0.7) (thickness 0.125)))
   )
-  (gr_text "http://code.google.com/p/daecu/\nfor rusEFI  R.02" (at 110.49 165.735 90) (layer F.SilkS)
+  (gr_text "http://code.google.com/p/daecu/\nfor rusEFI  R.03" (at 110.49 165.735 90) (layer F.SilkS)
     (effects (font (size 1.016 1.016) (thickness 0.2032)))
   )
   (gr_text GND (at 204.47 57.785) (layer B.SilkS)

hardware/frankenso/frankenso.sch

@@ -56,7 +56,7 @@ encoding utf-8
 Sheet 1 14
 Title "Frankenso"
 Date "3 nov 2014"
-Rev ".02"
+Rev ".03"
 Comp "rusEFI.com"
 Comment1 ""
 Comment2 ""

hardware/frankenso/known_issues.txt

@@ -27,6 +27,7 @@
 27) RESOLVED IN R0.2 surge suppression diode option for some low-side
 28) RESOLVED IN R0.2 better silkscreen for P602 & P604 - explicit "5v" "12v" "GND"
 29) RESOLVED IN R0.2 Add LED indicators to injector channels. 
+30) RESOLVED IN R0.3 3D for C1001 bulk cap has black mark on wrong side
 
 For honda add-on / rewiring board
 -- Add 2A high side solinoid drive for VTec sol

hardware/rusefi_lib/SM0805-Jumper.mod

@@ -1,11 +1,11 @@
-PCBNEW-LibModule-V1  5/3/2014 7:56:45 PM
+PCBNEW-LibModule-V1  7/4/2014 6:24:21 AM
 # encoding utf-8
 Units mm
 $INDEX
 SM0805_jumper
 $EndINDEX
 $MODULE SM0805_jumper
-Po 0 0 0 15 536581C0 00000000 ~~
+Po 0 0 0 15 53B680BA 00000000 ~~
 Li SM0805_jumper
 Sc 0
 AR 
@@ -21,6 +21,13 @@ DS 0.508 -0.762 1.524 -0.762 0.09906 21
 DS 1.524 -0.762 1.524 0.762 0.09906 21
 DS 1.524 0.762 0.508 0.762 0.09906 21
 $PAD
+Sh "2" R 1.524 0.2032 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po 1.27 0
+$EndPAD
+$PAD
 Sh "1" R 0.889 1.397 0 0 0
 Dr 0 0 0
 At SMD N 00888000
@@ -48,6 +55,13 @@ At STD N 00E0FFFF
 Ne 0 ""
 Po -1.905 0
 $EndPAD
+$PAD
+Sh "1" R 1.524 0.2032 0 0 0
+Dr 0 0 0
+At SMD N 00888000
+Ne 0 ""
+Po -1.27 0
+$EndPAD
 $SHAPE3D
 Na "smd/chip_cms.wrl"
 Sc 0.1 0.1 0.1