rusefi
/
custom-board-bundle-sample-fork-of-rusefi
mirror of https://github.com/rusefi/custom-board-bundle-sample-fork-of-rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Add raw gauges to sensor config pages (#1390) 

* clt

* iat

* minor cranking

* fix

* oilp too

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
This commit is contained in:
Matthew Kennedy 2020-04-30 15:44:34 -07:00 committed by GitHub
parent 6c15d6b2e8
commit b17198a541
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 27 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
firmware/integration/rusefi_config.txt
View File

@ -1125,8 +1125,8 @@ tle8888_mode_e tle8888mode;
float autoTuneTpsRocThreshold;
float autoTuneTpsQuietPeriod;
float unused2432;
float postCrankingFactor;Fuel multiplier taper, see also postCrankingDurationSec;"mult", 1, 0, 0, 100, 4
float postCrankingDurationSec;See also postCrankingFactor;"seconds", 1, 0, 0, 100, 2
float postCrankingFactor;+Fuel multiplier (enrichment) immediately after engine start;"mult", 1, 0, 0, 100, 4
float postCrankingDurationSec;+Time over which to taper out after start enrichment;"seconds", 1, 0, 0, 100, 2
ThermistorConf auxTempSensor1;todo: finish implementation #332
ThermistorConf auxTempSensor2;todo: finish implementation #332
int16_t fuelClosedLoopCltThreshold;;"C", 1, 0, 0, 100, 0

39
firmware/tunerstudio/rusefi.input
View File

@ -2035,8 +2035,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "Input channel", clt_adcChannel
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
field = "#Here is three pairs of thermistor temperature and resistance."
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
field = "#Input three pairs of thermistor temperature and resistance."
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
field = ""
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
@ -2049,17 +2049,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = ""
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
dialog = cltSensor, "", xAxis
panel = clt_thermistor
dialog = cltGauges
gauge = CLTGauge
gauge = rawCltGauge
dialog = cltSensor, "CLT Sensor", border
panel = clt_thermistor, West
panel = cltGauges, East
; Sensors->IAT sensor
dialog = iat_thermistor, "IAT sensor"
field = "Input channel", iat_adcChannel
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
field = "#Here is three pairs of thermistor temperature and resistance."
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
field = "#Input three pairs of thermistor temperature and resistance."
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
field = ""
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
@ -2072,21 +2076,29 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = ""
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
dialog = iatSensor, "", xAxis
panel = iat_thermistor
dialog = iatGauges
gauge = IATGauge
gauge = rawIatGauge
dialog = iatSensor, "IAT Sensor", border
panel = iat_thermistor, West
panel = iatGauges, East
; Sensors->Oil pressure sensor
dialog = oilp_settings, "Oil pressure sensor"
dialog = oilp_settings, "Oil Pressure Sensor"
field = "Oil Pressure ADC input", oilPressure_hwChannel
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
dialog = oilPressureSensor, "", xAxis
panel = oilp_settings
dialog = oilPressureGauges
gauge = OilPressGauge
gauge = rawOilPressureGauge
dialog = oilPressureSensor, "", border
panel = oilp_settings, West
panel = oilPressureGauges, East
; Sensors->MAP sensor
dialog = mapSensorAnalog, "MAP sensor", yAxis
@ -2562,10 +2574,9 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
dialog = crankingFuel, "Fuel"
field = "Injection mode", crankingInjectionMode
field = "!Value '1' is currently recommended"
field = "Fuel Source For Cranking", useRunningMathForCranking
field = "Base fuel pulse width", cranking_baseFuel, {useRunningMathForCranking == 0}
dialog = crankingIAC, "IAC"
field = "Cranking IAC position", crankingIACposition
field = "After cranking IAC taper duration", afterCrankingIACtaperDuration
@ -2579,7 +2590,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs, {useConstantDwellDuringCranking == 1}
field = "Cranking Dwell Angle", crankingChargeAngle, {useConstantDwellDuringCranking == 0}
dialog = postCrankingEnrichment, "Post-cranking short-time fuel enrichment (NOT IMPLEMENTED #331)"
dialog = postCrankingEnrichment, "After start enrichment"
field = "Post-Cranking factor", postCrankingFactor
field = "Duration", postCrankingDurationSec