rusefi
/
custom-board-bundle-sample-fork-of-rusefi
mirror of https://github.com/rusefi/custom-board-bundle-sample-fork-of-rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Auto-generated configs and docs

This commit is contained in:
GitHub build-firmware Action 2021-11-11 23:37:47 +00:00
parent 0a7d276110
commit cfccb29fae
57 changed files with 244 additions and 234 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
firmware/config/boards/hellen/cypress/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 11 01:45:20 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 11 23:36:23 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2863,6 +2863,7 @@ struct engine_configuration_s {
*/
int16_t iacByTpsTaper;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_tx_pin X
* offset 2040
*/
@ -2872,6 +2873,7 @@ struct engine_configuration_s {
*/
brain_pin_e warningLedPin;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_rx_pin X
* offset 2042
*/
@ -4561,4 +4563,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 11 01:45:20 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 11 23:36:23 UTC 2021

4
firmware/config/boards/hellen/cypress/config/controllers/algo/rusefi_generated.h
View File

@ -1849,7 +1849,7 @@
#define show_test_presets true
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_HASH 767216975
#define SIGNATURE_HASH 2638281449
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -2356,7 +2356,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen_cypress.767216975"
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen_cypress.2638281449"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

6
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 11 01:45:18 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 11 23:36:20 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2863,6 +2863,7 @@ struct engine_configuration_s {
*/
int16_t iacByTpsTaper;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_tx_pin X
* offset 2040
*/
@ -2872,6 +2873,7 @@ struct engine_configuration_s {
*/
brain_pin_e warningLedPin;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_rx_pin X
* offset 2042
*/
@ -4555,4 +4557,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 11 01:45:18 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 11 23:36:20 UTC 2021

4
firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
View File

@ -1834,7 +1834,7 @@
#define show_test_presets true
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_HASH 3525247411
#define SIGNATURE_HASH 1659188757
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -2341,7 +2341,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator true
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2021.11.11.kin.3525247411"
#define TS_SIGNATURE "rusEFI 2021.11.11.kin.1659188757"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

6
firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:22 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:26 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2863,6 +2863,7 @@ struct engine_configuration_s {
*/
int16_t iacByTpsTaper;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_tx_pin X
* offset 2040
*/
@ -2872,6 +2873,7 @@ struct engine_configuration_s {
*/
brain_pin_e warningLedPin;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_rx_pin X
* offset 2042
*/
@ -4561,4 +4563,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:22 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:26 UTC 2021

4
firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
View File

@ -1862,7 +1862,7 @@
#define show_test_presets false
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_HASH 4199349756
#define SIGNATURE_HASH 1253493338
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -2369,7 +2369,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port false
#define TS_SIGNATURE "rusEFI 2021.11.11.subaru_eg33_f7.4199349756"
#define TS_SIGNATURE "rusEFI 2021.11.11.subaru_eg33_f7.1253493338"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

6
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2863,6 +2863,7 @@ struct engine_configuration_s {
*/
int16_t iacByTpsTaper;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_tx_pin X
* offset 2040
*/
@ -2872,6 +2873,7 @@ struct engine_configuration_s {
*/
brain_pin_e warningLedPin;
/**
* Auxiliary sensor serial, not to be confused with secondary calibration serial
* set_aux_rx_pin X
* offset 2042
*/
@ -4561,4 +4563,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021

2
firmware/controllers/generated/fsio_enums_generated.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
FSIO_SETTING_ACIDLEEXTRAOFFSET = 1000,

2
firmware/controllers/generated/fsio_getters.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
case FSIO_SETTING_ACIDLEEXTRAOFFSET:

2
firmware/controllers/generated/fsio_names.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
static LENameOrdinalPair leacIdleExtraOffset(FSIO_SETTING_ACIDLEEXTRAOFFSET, "cfg_acIdleExtraOffset");

2
firmware/controllers/generated/fsio_strings.def
View File

@ -1,4 +1,4 @@
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
// by class com.rusefi.output.FileFsioSettingsConsumer
case FSIO_SETTING_ACIDLEEXTRAOFFSET:

4
firmware/controllers/generated/rusefi_generated.h
View File

@ -1849,7 +1849,7 @@
#define show_test_presets true
#define showHumanReadableWarning_offset 976
#define showSdCardWarning_offset 76
#define SIGNATURE_HASH 1616213464
#define SIGNATURE_HASH 3501146750
#define silentTriggerError_offset 1464
#define slowAdcAlpha_offset 2088
#define sparkDwellRpmBins_offset 332
@ -2356,7 +2356,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2021.11.11.all.1616213464"
#define TS_SIGNATURE "rusEFI 2021.11.11.all.3501146750"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'

4
firmware/controllers/generated/signature_all.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 1616213464
#define TS_SIGNATURE "rusEFI 2021.11.11.all.1616213464"
#define SIGNATURE_HASH 3501146750
#define TS_SIGNATURE "rusEFI 2021.11.11.all.3501146750"

4
firmware/controllers/generated/signature_atlas.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 2090828031
#define TS_SIGNATURE "rusEFI 2021.11.11.atlas.2090828031"
#define SIGNATURE_HASH 3429218137
#define TS_SIGNATURE "rusEFI 2021.11.11.atlas.3429218137"

4
firmware/controllers/generated/signature_f429-discovery.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 1616213464
#define TS_SIGNATURE "rusEFI 2021.11.11.f429-discovery.1616213464"
#define SIGNATURE_HASH 3501146750
#define TS_SIGNATURE "rusEFI 2021.11.11.f429-discovery.3501146750"

4
firmware/controllers/generated/signature_frankenso_na6.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 442966065
#define TS_SIGNATURE "rusEFI 2021.11.11.frankenso_na6.442966065"
#define SIGNATURE_HASH 2862421911
#define TS_SIGNATURE "rusEFI 2021.11.11.frankenso_na6.2862421911"

4
firmware/controllers/generated/signature_hellen-nb1.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 133362673
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen-nb1.133362673"
#define SIGNATURE_HASH 2254526108
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen-nb1.2254526108"

4
firmware/controllers/generated/signature_hellen121nissan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 3953405338
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen121nissan.3953405338"
#define SIGNATURE_HASH 1532893756
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen121nissan.1532893756"

4
firmware/controllers/generated/signature_hellen121vag.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 867800478
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen121vag.867800478"
#define SIGNATURE_HASH 2202247736
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen121vag.2202247736"

4
firmware/controllers/generated/signature_hellen128.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 2247449600
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen128.2247449600"
#define SIGNATURE_HASH 890203046
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen128.890203046"

4
firmware/controllers/generated/signature_hellen154hyundai.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 606786530
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen154hyundai.606786530"
#define SIGNATURE_HASH 2496717892
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen154hyundai.2496717892"

4
firmware/controllers/generated/signature_hellen72.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 113251839
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen72.113251839"
#define SIGNATURE_HASH 3704379812
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen72.3704379812"

4
firmware/controllers/generated/signature_hellen88bmw.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 944410700
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen88bmw.944410700"
#define SIGNATURE_HASH 2293278698
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen88bmw.2293278698"

4
firmware/controllers/generated/signature_hellenNA6.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 3507322070
#define TS_SIGNATURE "rusEFI 2021.11.11.hellenNA6.3507322070"
#define SIGNATURE_HASH 1435377853
#define TS_SIGNATURE "rusEFI 2021.11.11.hellenNA6.1435377853"

4
firmware/controllers/generated/signature_hellen_cypress.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt
//
#define SIGNATURE_HASH 767216975
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen_cypress.767216975"
#define SIGNATURE_HASH 2638281449
#define TS_SIGNATURE "rusEFI 2021.11.11.hellen_cypress.2638281449"

4
firmware/controllers/generated/signature_kin.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt
//
#define SIGNATURE_HASH 3525247411
#define TS_SIGNATURE "rusEFI 2021.11.11.kin.3525247411"
#define SIGNATURE_HASH 1659188757
#define TS_SIGNATURE "rusEFI 2021.11.11.kin.1659188757"

4
firmware/controllers/generated/signature_mre_f4.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 3905249868
#define TS_SIGNATURE "rusEFI 2021.11.11.mre_f4.3905249868"
#define SIGNATURE_HASH 1480545770
#define TS_SIGNATURE "rusEFI 2021.11.11.mre_f4.1480545770"

4
firmware/controllers/generated/signature_mre_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 3905249868
#define TS_SIGNATURE "rusEFI 2021.11.11.mre_f7.3905249868"
#define SIGNATURE_HASH 1480545770
#define TS_SIGNATURE "rusEFI 2021.11.11.mre_f7.1480545770"

4
firmware/controllers/generated/signature_prometheus_405.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 817867838
#define TS_SIGNATURE "rusEFI 2021.11.11.prometheus_405.817867838"
#define SIGNATURE_HASH 2152045464
#define TS_SIGNATURE "rusEFI 2021.11.11.prometheus_405.2152045464"

4
firmware/controllers/generated/signature_prometheus_469.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 817867838
#define TS_SIGNATURE "rusEFI 2021.11.11.prometheus_469.817867838"
#define SIGNATURE_HASH 2152045464
#define TS_SIGNATURE "rusEFI 2021.11.11.prometheus_469.2152045464"

4
firmware/controllers/generated/signature_proteus_f4.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 1672264213
#define TS_SIGNATURE "rusEFI 2021.11.11.proteus_f4.1672264213"
#define SIGNATURE_HASH 3545664947
#define TS_SIGNATURE "rusEFI 2021.11.11.proteus_f4.3545664947"

4
firmware/controllers/generated/signature_proteus_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 1672264213
#define TS_SIGNATURE "rusEFI 2021.11.11.proteus_f7.1672264213"
#define SIGNATURE_HASH 3545664947
#define TS_SIGNATURE "rusEFI 2021.11.11.proteus_f7.3545664947"

4
firmware/controllers/generated/signature_subaru_eg33_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt
//
#define SIGNATURE_HASH 4199349756
#define TS_SIGNATURE "rusEFI 2021.11.11.subaru_eg33_f7.4199349756"
#define SIGNATURE_HASH 1253493338
#define TS_SIGNATURE "rusEFI 2021.11.11.subaru_eg33_f7.1253493338"

BIN
firmware/tunerstudio/generated/cache.zip
View File

Binary file not shown.

16
firmware/tunerstudio/generated/rusefi.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.all.1616213464"
signature = "rusEFI 2021.11.11.all.3501146750"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.all.1616213464" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.all.3501146750" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -5003,8 +5003,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5036,7 +5036,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_atlas.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.atlas.2090828031"
signature = "rusEFI 2021.11.11.atlas.3429218137"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.atlas.2090828031" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.atlas.3429218137" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:13 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:13 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4995,8 +4995,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5028,7 +5028,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_f429-discovery.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.f429-discovery.1616213464"
signature = "rusEFI 2021.11.11.f429-discovery.3501146750"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.f429-discovery.1616213464" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.f429-discovery.3501146750" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:31 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:19 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -5003,8 +5003,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5036,7 +5036,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.frankenso_na6.442966065"
signature = "rusEFI 2021.11.11.frankenso_na6.2862421911"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.frankenso_na6.442966065" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.frankenso_na6.2862421911" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:00 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:56 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -5003,8 +5003,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5036,7 +5036,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

17
firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen-nb1.133362673"
signature = "rusEFI 2021.11.11.hellen-nb1.2254526108"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen-nb1.133362673" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen-nb1.2254526108" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:49 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:43 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed
@ -5052,6 +5052,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = connection, "", yAxis
field = "ADC vRef voltage", adcVcc
panel = tsPort
field = "uartConsoleSerialSpeed", uartConsoleSerialSpeed
panel = auxSerial

16
firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen121nissan.3953405338"
signature = "rusEFI 2021.11.11.hellen121nissan.1532893756"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen121nissan.3953405338" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen121nissan.1532893756" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:39 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:29 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_hellen121vag.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen121vag.867800478"
signature = "rusEFI 2021.11.11.hellen121vag.2202247736"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen121vag.867800478" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen121vag.2202247736" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:37 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:26 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen128.2247449600"
signature = "rusEFI 2021.11.11.hellen128.890203046"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen128.2247449600" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen128.890203046" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:34 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:22 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen154hyundai.606786530"
signature = "rusEFI 2021.11.11.hellen154hyundai.2496717892"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen154hyundai.606786530" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen154hyundai.2496717892" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:42 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:33 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

17
firmware/tunerstudio/generated/rusefi_hellen72.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen72.113251839"
signature = "rusEFI 2021.11.11.hellen72.3704379812"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen72.113251839" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen72.3704379812" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:47 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:39 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed
@ -5052,6 +5052,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = connection, "", yAxis
field = "ADC vRef voltage", adcVcc
panel = tsPort
field = "uartConsoleSerialSpeed", uartConsoleSerialSpeed
panel = auxSerial

16
firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen88bmw.944410700"
signature = "rusEFI 2021.11.11.hellen88bmw.2293278698"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen88bmw.944410700" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen88bmw.2293278698" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:44 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:36 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

17
firmware/tunerstudio/generated/rusefi_hellenNA6.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellenNA6.3507322070"
signature = "rusEFI 2021.11.11.hellenNA6.1435377853"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellenNA6.3507322070" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellenNA6.1435377853" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:52 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:46 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4986,8 +4986,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5014,7 +5014,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed
@ -5052,6 +5052,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = connection, "", yAxis
field = "ADC vRef voltage", adcVcc
panel = tsPort
field = "uartConsoleSerialSpeed", uartConsoleSerialSpeed
panel = auxSerial

16
firmware/tunerstudio/generated/rusefi_hellen_cypress.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.hellen_cypress.767216975"
signature = "rusEFI 2021.11.11.hellen_cypress.2638281449"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.hellen_cypress.767216975" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.hellen_cypress.2638281449" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 11 01:45:20 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 11 23:36:23 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -5003,8 +5003,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5036,7 +5036,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_kinetis.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.kin.3525247411"
signature = "rusEFI 2021.11.11.kin.1659188757"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.kin.3525247411" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.kin.1659188757" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 11 01:45:18 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 11 23:36:20 UTC 2021
pageSize = 19972
page = 1
@ -1635,8 +1635,8 @@ fsioTable4RpmBins = array, F32, 19940, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4970,8 +4970,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5003,7 +5003,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_mre_f4.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.mre_f4.3905249868"
signature = "rusEFI 2021.11.11.mre_f4.1480545770"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.mre_f4.3905249868" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.mre_f4.1480545770" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:57 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:53 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4985,8 +4985,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5013,7 +5013,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_mre_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.mre_f7.3905249868"
signature = "rusEFI 2021.11.11.mre_f7.1480545770"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.mre_f7.3905249868" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.mre_f7.1480545770" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:44:54 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:49 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4985,8 +4985,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5013,7 +5013,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_prometheus_405.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.prometheus_405.817867838"
signature = "rusEFI 2021.11.11.prometheus_405.2152045464"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.prometheus_405.817867838" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.prometheus_405.2152045464" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:05 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:03 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4998,8 +4998,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5031,7 +5031,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_prometheus_469.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.prometheus_469.817867838"
signature = "rusEFI 2021.11.11.prometheus_469.2152045464"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.prometheus_469.817867838" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.prometheus_469.2152045464" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:02 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:35:59 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4998,8 +4998,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5031,7 +5031,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_proteus_f4.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.proteus_f4.1672264213"
signature = "rusEFI 2021.11.11.proteus_f4.3545664947"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.proteus_f4.1672264213" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.proteus_f4.3545664947" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:10 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:10 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4972,8 +4972,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5000,7 +5000,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_proteus_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.proteus_f7.1672264213"
signature = "rusEFI 2021.11.11.proteus_f7.3545664947"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.proteus_f7.1672264213" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.proteus_f7.3545664947" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:07 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:06 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4972,8 +4972,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5000,7 +5000,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
dialog = canBusMain, "CAN Bus Communication", yAxis
panel = canBus
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

16
firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2021.11.11.subaru_eg33_f7.4199349756"
signature = "rusEFI 2021.11.11.subaru_eg33_f7.1253493338"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2021.11.11.subaru_eg33_f7.4199349756" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2021.11.11.subaru_eg33_f7.1253493338" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:22 UTC 2021
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:26 UTC 2021
pageSize = 20000
page = 1
@ -1663,8 +1663,8 @@ fsioTable4RpmBins = array, F32, 19968, [8], "RPM", 1, 0, 0, 25500, 2
startOfCrankingPrimingPulse = "Prime pulse for cold engine, duration in ms\nLinear interpolation between -40F/-40C and fallout temperature\n\nSee also isFasterEngineSpinUpEnabled\nset cranking_priming_pulse X"
afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup."
iacByTpsTaper = "Extra IAC, in percent between 0 and 100, tapered between zero and idle deactivation TPS value"
auxSerialTxPin = "set_aux_tx_pin X"
auxSerialRxPin = "set_aux_rx_pin X"
auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_tx_pin X"
auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial\nset_aux_rx_pin X"
tpsAccelLength = "This is the number of engine cycles that the TPS position change can occur over, a longer duration will make the enrichment more active but too long may affect steady state driving, a good default is 30-60 cycles."
tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in."
uartConsoleSerialSpeed = "Band rate for primary TTL"
@ -4996,8 +4996,8 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
dialog = tsPort, "Calibration Secondary Serial"
field = "Use UART/TTL calibration serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
@ -5029,7 +5029,7 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
panel = canBus
panel = canBus2
dialog = auxSerial, "AUX Serial"
dialog = auxSerial, "AUX Sensor Serial"
field = "RX pin", auxSerialRxPin
field = "TX pin", auxSerialTxPin
field = "Serial Baud Rate", auxSerialSpeed

5
java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 01:45:15 UTC 2021
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 11 23:36:17 UTC 2021
// by class com.rusefi.output.FileJavaFieldsConsumer
import com.rusefi.config.*;
@ -1776,7 +1776,6 @@ public class Fields {
public static final int servoOutputPins8_offset = 3147;
public static final int showHumanReadableWarning_offset = 976;
public static final int showSdCardWarning_offset = 76;
public static final int SIGNATURE_HASH = 1616213464;
public static final int silentTriggerError_offset = 1464;
public static final int slowAdcAlpha_offset = 2088;
public static final int sparkDwellRpmBins_offset = 332;
@ -2228,7 +2227,7 @@ public class Fields {
public static final int TS_RESPONSE_UNDERRUN = 0x80;
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
public static final char TS_SET_LOGGER_SWITCH = 'l';
public static final String TS_SIGNATURE = "rusEFI 2021.11.11.all.1616213464";
public static final String TS_SIGNATURE = "rusEFI 2021.11.11.all.3501146750";
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
public static final char TS_TEST_COMMAND = 't';
public static final int tunerStudioSerialSpeed_offset = 728;

2
java_console/rusefi.xml
View File

@ -1,6 +1,6 @@
<roms>
<!-- was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh Thu Nov 11 01:45:17 UTC 2021 -->
<!-- was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh Thu Nov 11 23:36:18 UTC 2021 -->
<rom>
<romid>