auto-sync

firmware/config/engines/bmw_e34.cpp

@@ -14,14 +14,15 @@
 #include "global.h"
 #include "bmw_e34.h"
 #include "thermistors.h"
+#include "settings.h"
 
 EXTERN_ENGINE;
 
 void setBmwE34(DECLARE_ENGINE_PARAMETER_F) {
 	board_configuration_s * boardConfiguration = &engineConfiguration->bc;
 
-//	engineConfiguration->algorithm = LM_PLAIN_MAF;
+//	setAlgorithm(LM_PLAIN_MAF);
-	engineConfiguration->algorithm = LM_SPEED_DENSITY;
+	setAlgorithm(LM_SPEED_DENSITY);
 	engineConfiguration->injector.flow = 750;
 
 	boardConfiguration->tunerStudioSerialSpeed = 38400;

firmware/config/engines/citroenBerlingoTU3JP.cpp

@@ -15,6 +15,7 @@
 #include "engine_math.h"
 #include "thermistors.h"
 #include "citroenBerlingoTU3JP.h"
+#include "settings.h"
 
 void setLCD(board_configuration_s *boardConfiguration) {
 	boardConfiguration->HD44780_rs = GPIOE_7;
@@ -99,10 +100,9 @@ void setCitroenBerlingoTU3JPConfiguration(DECLARE_ENGINE_PARAMETER_F) {
 	/**
 	 * Algorithm Alpha-N setting
 	 */
-	engineConfiguration->algorithm = LM_ALPHA_N;
+	setAlgorithm(LM_ALPHA_N);
 	setFuelLoadBin(0, 100 PASS_ENGINE_PARAMETER);
 	setFuelRpmBin(800, 7000 PASS_ENGINE_PARAMETER);
-	setTimingLoadBin(0, 100 PASS_ENGINE_PARAMETER);
 	setTimingRpmBin(800, 7000 PASS_ENGINE_PARAMETER);
 
 	/**

firmware/config/engines/honda_accord.cpp

@@ -17,6 +17,7 @@
 #include "thermistors.h"
 #include "honda_accord.h"
 #include "engine_math.h"
+#include "settings.h"
 
 void setFrankenso_01_LCD(board_configuration_s *boardConfiguration) {
 	boardConfiguration->HD44780_rs = GPIOE_7;
@@ -51,9 +52,8 @@ static void setHondaAccordConfigurationCommon(DECLARE_ENGINE_PARAMETER_F) {
 
 //	engineConfiguration->algorithm = LM_SPEED_DENSITY;
 	// I want to start with a simple Alpha-N
-	engineConfiguration->algorithm = LM_ALPHA_N;
+	setAlgorithm(LM_ALPHA_N);
 	setFuelLoadBin(0, 100 PASS_ENGINE_PARAMETER);
-	setTimingLoadBin(0, 100 PASS_ENGINE_PARAMETER);
 
 	/**
 	 * 18K Ohm @ -20C

firmware/config/engines/mazda_626.cpp

@@ -14,6 +14,7 @@
 #include "custom_engine.h"
 #include "allsensors.h"
 #include "fsio_impl.h"
+#include "settings.h"
 
 EXTERN_ENGINE;
 
@@ -41,9 +42,8 @@ void setMazda626EngineConfiguration(DECLARE_ENGINE_PARAMETER_F) {
 	engineConfiguration->tpsMin = 80;
 	engineConfiguration->tpsMax = 764;
 
-	engineConfiguration->algorithm = LM_ALPHA_N;
+	setAlgorithm(LM_ALPHA_N);
 	setFuelLoadBin(0, 100 PASS_ENGINE_PARAMETER);
-	setTimingLoadBin(0, 100 PASS_ENGINE_PARAMETER);
 
 	// set_whole_fuel_map 9
 	setWholeFuelMap(9 PASS_ENGINE_PARAMETER);

firmware/controllers/settings.cpp

@@ -21,6 +21,7 @@
 #include "console_io.h"
 #include "engine.h"
 #include "efiGpio.h"
+#include "engine_math.h"
 
 #if EFI_PROD_CODE || defined(__DOXYGEN__)
 #include "rusefi.h"
@@ -38,7 +39,6 @@ extern int waveChartUsedSize;
 extern WaveChart waveChart;
 #endif /* EFI_WAVE_CHART */
 
-
 static char LOGGING_BUFFER[1000];
 static Logging logger("settings control", LOGGING_BUFFER, sizeof(LOGGING_BUFFER));
 
@@ -99,7 +99,8 @@ static void printOutputs(engine_configuration_s *engineConfiguration) {
 	scheduleMsg(&logger, "mainRelay: mode %s @ %s", getPin_output_mode_e(boardConfiguration->mainRelayPinMode),
 			hwPortname(boardConfiguration->mainRelayPin));
 
-	scheduleMsg(&logger, "alternator field: mode %s @ %s", getPin_output_mode_e(boardConfiguration->alternatorControlPinMode),
+	scheduleMsg(&logger, "alternator field: mode %s @ %s",
+			getPin_output_mode_e(boardConfiguration->alternatorControlPinMode),
 			hwPortname(boardConfiguration->alternatorControlPin));
 }
 
@@ -433,8 +434,23 @@ static void setCrankingRpm(int value) {
 	doPrintConfiguration(engine);
 }
 
-static void setAlgorithm(int value) {
+/**
-	engineConfiguration->algorithm = (engine_load_mode_e) value;
+ * this method sets algorithm and ignition table scale
+ */
+void setAlgorithm(engine_load_mode_e algo) {
+	engineConfiguration->algorithm = algo;
+	if (algo == LM_ALPHA_N) {
+		setTimingLoadBin(0, 100 PASS_ENGINE_PARAMETER);
+	} else if (algo == LM_SPEED_DENSITY) {
+		setTimingLoadBin(0, 160 PASS_ENGINE_PARAMETER);
+	}
+}
+
+/**
+ * this method is used in console - it also prints current configuration
+ */
+static void setAlgorithmInt(int value) {
+	setAlgorithmInt((engine_load_mode_e) value);
 	doPrintConfiguration(engine);
 }
 
@@ -921,7 +937,7 @@ void initSettings(engine_configuration_s *engineConfiguration) {
 
 	addConsoleActionI("set_rpm_hard_limit", setRpmHardLimit);
 	addConsoleActionI("set_firing_order", setFiringOrder);
-	addConsoleActionI("set_algorithm", setAlgorithm);
+	addConsoleActionI("set_algorithm", setAlgorithmInt);
 	addConsoleAction("stopengine", (Void) stopEngine);
 
 	// todo: refactor this - looks like all boolean flags should be controlled with less code duplication

firmware/controllers/settings.h

@@ -12,6 +12,7 @@
 #include "engine.h"
 
 void initSettings(engine_configuration_s *engineConfiguration);
+void setAlgorithm(engine_load_mode_e algo);
 void printSpiState(Logging *logger, board_configuration_s *boardConfiguration);
 void printConfiguration(engine_configuration_s *engineConfiguration);
 void stopEngine(void);

firmware/rusefi.cpp

@@ -276,5 +276,5 @@ int getRusEfiVersion(void) {
 		return 1; // this is here to make the compiler happy about the unused array
 	if (UNUSED_CCM_SIZE[0] == 0)
 		return 1; // this is here to make the compiler happy about the unused array
-	return 20150319;
+	return 20150321;
 }