diff --git a/firmware/integration/rusefi_config.txt b/firmware/integration/rusefi_config.txt
index 537560868b..6e9f796856 100644
--- a/firmware/integration/rusefi_config.txt
+++ b/firmware/integration/rusefi_config.txt
@@ -250,6 +250,7 @@ struct_no_prefix engine_configuration_s
 
 #define TPS_TPS_ACCEL_TABLE 8
 #define ADC_CHANNEL_NONE 0
+#define TPS_TPS_ACCEL_CLT_CORR_TABLE 4
 
 #define BARO_CORR_SIZE 4
 
@@ -1452,7 +1453,9 @@ tChargeMode_e tChargeMode;
 
 	uint16_t autoscale fordInjectorSmallPulseBreakPoint;;"mg", 0.001, 0, 0, 65, 3
 
-	int8_t[5] unused4080;;"", 1, 0, 0, 0, 0
+	uint8_t[TPS_TPS_ACCEL_CLT_CORR_TABLE] autoscale tpsTspCorrValues;;"multiplier", 0.02, 0, 0, 5, 2
+
+	int8_t unused4080;;"", 1, 0, 0, 0, 0
 
 ! Someday there will be a 6th option for BMW S55 that uses a separate shaft just for HPFP
 #define hpfp_cam_e_enum "NONE", "Intake 1", "Exhaust 1", "Intake 2", "Exhaust 2"
@@ -1540,7 +1543,8 @@ uint16_t[HIGH_SPEED_COUNT] highSpeedOffsets;;"", 1.0000, 0.00000,0.00,65535, 0,
 
 float etbDutyShutdownThreshold
 Gpio[LUA_DIGITAL_INPUT_COUNT iterate] luaDigitalInputPins;
-uint8_t[140] mainUnusedEnd;;"units", 1, 0, 0, 1, 0
+uint8_t[TPS_TPS_ACCEL_CLT_CORR_TABLE] autoscale tpsTspCorrValuesBins;;"RPM", 50, 0, 0, 17500, 0
+uint8_t[136] mainUnusedEnd;;"units", 1, 0, 0, 1, 0
 
 ! end of engine_configuration_s
 end_struct
diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input
index 23a8875e8d..51caf0512a 100644
--- a/firmware/tunerstudio/rusefi.input
+++ b/firmware/tunerstudio/rusefi.input
@@ -416,6 +416,14 @@ enable2ndByteCanID = false
 		yBins		= dwellVoltageCorrValues
 		gauge		= VBattGauge
 
+	curve = tpsTspRpmCorrection, "Transient RPM correction"
+		columnLabel = "RPM", "Multiplier"
+		xAxis		=  6, 16, 11
+		yAxis		=  0, 3, 7
+		xBins		= tpsTspCorrValuesBins, RPMValue
+		yBins		= tpsTspCorrValues
+		gauge		= RPMGauge
+
 	curve = primingPulse, "Priming pulse fuel mass"
 		columnLabel = "Coolant", "Prime Pulse"
 		xAxis		=  -40, 120, 9
@@ -1622,6 +1630,7 @@ menuDialog = main
 		# Accel enrichment
 		subMenu = AccelEnrich,				"Acceleration enrichment", 0, {isInjectionEnabled == 1}
 		subMenu = tpsTpsAccelTbl,			"TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
+		subMenu = tpsTspRpmCorrection,      "TPS/TPS extra fuelRPM correction", 0, {isInjectionEnabled == 1}
 
 		groupMenu = "Wall wetting AE"
 		groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }