rusefi
/
custom-board-bundle-sample-fork-of-rusefi
mirror of https://github.com/rusefi/custom-board-bundle-sample-fork-of-rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

auto-sync

This commit is contained in:
rusEfi 2017-02-12 21:04:18 -05:00
parent dc48663095
commit ea0b748e44
17 changed files with 7369 additions and 7201 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
firmware/config/engines/dodge_neon.cpp
View File

@ -261,7 +261,7 @@ void setDodgeNeonNGCEngineConfiguration(DECLARE_ENGINE_PARAMETER_F) {
engineConfiguration->warmupAfrPid.pFactor = -0.2;
engineConfiguration->warmupAfrPid.iFactor = -0.0005;
// engineConfiguration->warmupAfrPid.dFactor = -0.02;
engineConfiguration->debugMode = WARMUP_ENRICH;
engineConfiguration->debugMode = DBG_WARMUP_ENRICH;
// set global_trigger_offset_angle 38
engineConfiguration->globalTriggerAngleOffset = 38;

2
firmware/config/engines/ford_festiva.cpp
View File

@ -273,7 +273,7 @@ void setFordEscortGt(DECLARE_ENGINE_PARAMETER_F) {
engineConfiguration->warmupAfrPid.pFactor = -0.2;
engineConfiguration->warmupAfrPid.iFactor = -0.0005;
// engineConfiguration->warmupAfrPid.dFactor = -0.02;
engineConfiguration->debugMode = WARMUP_ENRICH;
engineConfiguration->debugMode = DBG_WARMUP_ENRICH;
engineConfiguration->tpsAccelEnrichmentThreshold = 40;

14
firmware/console/status_loop.cpp
View File

@ -707,9 +707,14 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
}
if (engineConfiguration->debugMode == DBG_TRIGGER_INPUT) {
tsOutputChannels->debugIntField1 = engine->triggerCentral.getHwEventCounter(0);
tsOutputChannels->debugIntField2 = engine->triggerCentral.getHwEventCounter(1);
tsOutputChannels->debugIntField3 = engine->triggerCentral.getHwEventCounter(2);
tsOutputChannels->debugIntField1 = engine->triggerCentral.getHwEventCounter((int)SHAFT_PRIMARY_FALLING);
tsOutputChannels->debugIntField2 = engine->triggerCentral.getHwEventCounter((int)SHAFT_SECONDARY_FALLING);
tsOutputChannels->debugIntField3 = engine->triggerCentral.getHwEventCounter((int)SHAFT_3RD_FALLING);
tsOutputChannels->debugFloatField1 = engine->triggerCentral.getHwEventCounter((int)SHAFT_PRIMARY_RISING);
tsOutputChannels->debugFloatField2 = engine->triggerCentral.getHwEventCounter((int)SHAFT_SECONDARY_RISING);
tsOutputChannels->debugFloatField3 = engine->triggerCentral.getHwEventCounter((int)SHAFT_3RD_RISING);
} else if (engineConfiguration->debugMode == FSIO_ADC) {
// todo: implement a proper loop
if (engineConfiguration->fsioAdc[0] != EFI_ADC_NONE) {
@ -720,8 +725,11 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
tsOutputChannels->debugIntField1 = engine->engineState.vssCounter;
} else if (engineConfiguration->debugMode == DBG_SD_CARD) {
tsOutputChannels->debugIntField1 = engine->engineState.totalLoggedBytes;
} else if (engineConfiguration->debugMode == DBG_CRANKING_DETAILS) {
tsOutputChannels->debugIntField1 = engine->rpmCalculator.getRevolutionCounterSinceStart();
}
tsOutputChannels->wallFuelAmount = ENGINE(wallFuel).getWallFuel(0);
tsOutputChannels->wallFuelCorrection = ENGINE(wallFuelCorrection);
// TPS acceleration

2
firmware/controllers/algo/engine.cpp
View File

@ -185,7 +185,7 @@ void EngineState::periodicFastCallback(DECLARE_ENGINE_PARAMETER_F) {
cltFuelCorrection = warmupAfrPid.getValue(warmupTargetAfr, currentAfr, 1);
}
#if ! EFI_UNIT_TEST || defined(__DOXYGEN__)
if (engineConfiguration->debugMode == WARMUP_ENRICH) {
if (engineConfiguration->debugMode == DBG_WARMUP_ENRICH) {
tsOutputChannels.debugFloatField1 = warmupTargetAfr;
warmupAfrPid.postState(&tsOutputChannels);
}

2
firmware/controllers/algo/engine_configuration.cpp
View File

@ -715,7 +715,7 @@ void setDefaultConfiguration(DECLARE_ENGINE_PARAMETER_F) {
engineConfiguration->isWaveAnalyzerEnabled = true;
engineConfiguration->isIdleThreadEnabled = true;
engineConfiguration->debugMode = ALTERNATOR_PID;
engineConfiguration->debugMode = DBG_ALTERNATOR_PID;
engineConfiguration->acIdleRpmBump = 200;
engineConfiguration->knockDetectionWindowStart = 35;

8
firmware/controllers/algo/rusefi_enums.h
View File

@ -644,16 +644,16 @@ typedef enum {
} brain_pin_e;
typedef enum {
ALTERNATOR_PID = 0,
DBG_ALTERNATOR_PID = 0,
DBG_TPS_ACCEL = 1,
WARMUP_ENRICH = 2,
IDLE = 3,
DBG_WARMUP_ENRICH = 2,
DBG_IDLE = 3,
DBG_EL_ACCEL = 4,
DBG_TRIGGER_INPUT = 5,
FSIO_ADC = 6,
AUX_PID_1 = 7,
DBG_VVT = 8,
DBG_POST_CRANKING_ENRICH = 9,
DBG_CRANKING_DETAILS = 9,
DBG_IGNITION_TIMING = 10,
DBG_FUEL_PID_CORRECTION = 11,
DBG_VEHICLE_SPEED_SENSOR = 12,

4
firmware/controllers/alternatorController.cpp
View File

@ -59,7 +59,7 @@ static msg_t AltCtrlThread(int param) {
chThdSleepMilliseconds(dt);
#if ! EFI_UNIT_TEST || defined(__DOXYGEN__)
if (engineConfiguration->debugMode == ALTERNATOR_PID) {
if (engineConfiguration->debugMode == DBG_ALTERNATOR_PID) {
// this block could be executed even in on/off alternator control mode
// but at least we would reflect latest state
tsOutputChannels.debugFloatField1 = currentAltDuty;
@ -88,7 +88,7 @@ static msg_t AltCtrlThread(int param) {
bool newState = (vBatt < targetVoltage - h) || (currentPlainOnOffState && vBatt < targetVoltage);
enginePins.alternatorPin.setValue(newState);
currentPlainOnOffState = newState;
if (engineConfiguration->debugMode == ALTERNATOR_PID) {
if (engineConfiguration->debugMode == DBG_ALTERNATOR_PID) {
tsOutputChannels.debugIntField1 = newState;
}

2
firmware/controllers/idle_thread.cpp
View File

@ -115,7 +115,7 @@ static void manualIdleController(int positionPercent) {
cltCorrectedPosition = maxF(cltCorrectedPosition, 0.01);
cltCorrectedPosition = minF(cltCorrectedPosition, 99.9);
if (engineConfiguration->debugMode == IDLE) {
if (engineConfiguration->debugMode == DBG_IDLE) {
tsOutputChannels.debugFloatField1 = actualIdlePosition;
}

2
firmware/integration/rusefi_config.txt
View File

@ -113,7 +113,7 @@ float baseFuel;+Fuel squirt duration while cranking\nA number of curves adjust t
int16_t rpm;+Cranking mode threshold. Special cranking logic controls fuel and spark while RPM is below this threshold\nset cranking_rpm X;"RPM", 1, 0, 0, 3000, 0
end_struct
#define debug_mode_e_enum "Alternator_PID", "TPS accel enrich", "Warmup PID", "IDLE", "EL accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT", "Post-crank enrich", "Timing", "Closed-loop fuel corr", "VSS", "SD card", "mode14", "mode15"
#define debug_mode_e_enum "Alternator_PID", "TPS accel enrich", "Warmup PID", "IDLE", "EL accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT PID", "Cranking", "Timing", "Closed-loop fuel corr", "VSS", "SD card", "mode14", "mode15"
custom debug_mode_e 4 bits, U32, @OFFSET@, [0:3], @@debug_mode_e_enum@@
#define vvt_mode_e_enum "First half", "Second half", "2GZ", "Miata NB2", "mode4", "mode5", "mode6", "mode7"

2
firmware/rusefi.cpp
View File

@ -249,5 +249,5 @@ int getRusEfiVersion(void) {
return 123; // this is here to make the compiler happy about the unused array
if (UNUSED_CCM_SIZE[0] * 0 != 0)
return 3211; // this is here to make the compiler happy about the unused array
return 20170209;
return 20170212;
}

14
firmware/tunerstudio/rusefi.ini
View File

@ -42,7 +42,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Feb 12 01:30:52 EST 2017
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Feb 12 20:28:45 EST 2017
pageSize = 16376
page = 1
@ -554,7 +554,7 @@ page = 1
tpsDecelEnleanmentThreshold = scalar, F32, 2232, "roc", 1, 0, 0, 200, 3
tpsDecelEnleanmentMultiplier = scalar, F32, 2236, "coeff", 1, 0, 0, 200, 3
slowAdcAlpha = scalar, F32, 2240, "coeff", 1, 0, 0, 200, 3
debugMode = bits, U32, 2244, [0:3], "Alternator_PID", "TPS accel enrich", "Warmup PID", "IDLE", "EL accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT", "Post-crank enrich", "Timing", "Closed-loop fuel corr", "VSS", "SD card", "mode14", "mode15"
debugMode = bits, U32, 2244, [0:3], "Alternator_PID", "TPS accel enrich", "Warmup PID", "IDLE", "EL accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT PID", "Cranking", "Timing", "Closed-loop fuel corr", "VSS", "SD card", "mode14", "mode15"
warmupAfrPid_pFactor = scalar, F32, 2248, "value", 1, 0, -1000, 1000, 5
warmupAfrPid_iFactor = scalar, F32, 2252, "value", 1, 0, -1000, 1000, 5
warmupAfrPid_dFactor = scalar, F32, 2256, "value", 1, 0, -1000, 1000, 5
@ -1216,6 +1216,8 @@ fileVersion = { 20161225 }
debugFloatField3Gauge = debugFloatField3, "debug f3", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField4Gauge = debugFloatField4, "debug f4", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField5Gauge = debugFloatField5, "debug f5", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField6Gauge = debugFloatField6, "debug f6", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField7Gauge = debugFloatField7, "debug f7", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugIntField1Gauge = debugIntField1, "debug i1", "%", 0, 100, 0, 0, 100, 100, 0, 0
debugIntField2Gauge = debugIntField2, "debug i2", "%", 0, 100, 0, 0, 100, 100, 0, 0
debugIntField3Gauge = debugIntField3, "debug i3", "%", 0, 100, 0, 0, 100, 100, 0, 0
@ -1939,11 +1941,11 @@ cmd_test_idle_valve = "w\x00\x17\x00\x01"
dialog = cj125Function, "CJ125 Settings (wbo decoder)"
field = "Enabled", isCJ125Enabled
field = "!ECU reboot needed to apply these settings"
field = "ChipSelect pin", cj125CsPin
field = "ChipSelect mode", cj125CsPinMode
field = "ChipSelect pin", cj125CsPin, {isCJ125Enabled == 1}
field = "ChipSelect mode", cj125CsPinMode, {isCJ125Enabled == 1}
field = "SPI device", cj125SpiDevice
field = "UA input", cj125ua
field = "UR input", cj125ur
field = "UA input", cj125ua, {isCJ125Enabled == 1}
field = "UR input", cj125ur, {isCJ125Enabled == 1}
dialog = spiFunction, "SPI settings"
field = "!ECU reboot needed to apply these settings"

2
firmware/tunerstudio/rusefi.input
View File

@ -1148,6 +1148,8 @@ fileVersion = { 20161225 }
debugFloatField3Gauge = debugFloatField3, "debug f3", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField4Gauge = debugFloatField4, "debug f4", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField5Gauge = debugFloatField5, "debug f5", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField6Gauge = debugFloatField6, "debug f6", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugFloatField7Gauge = debugFloatField7, "debug f7", "%", 0, 100, 0, 0, 100, 100, 4, 4
debugIntField1Gauge = debugIntField1, "debug i1", "%", 0, 100, 0, 0, 100, 100, 0, 0
debugIntField2Gauge = debugIntField2, "debug i2", "%", 0, 100, 0, 0, 100, 100, 0, 0
debugIntField3Gauge = debugIntField3, "debug i3", "%", 0, 100, 0, 0, 100, 100, 0, 0

11826
hardware/frankenso/frankenso.kicad_pcb
View File

File diff suppressed because it is too large Load Diff

2650
hardware/frankenso/frankenso.net
View File

File diff suppressed because it is too large Load Diff

32
hardware/frankenso/frankenso.sch
View File

@ -3042,4 +3042,36 @@ Connection ~ 9150 9700
Wire Wire Line
9150 9950 9150 10000
Connection ~ 9150 10000
$Comp
L CONN_1 P65
U 1 1 58A309FB
P 9250 3900
F 0 "P65" H 9330 3900 40 0000 L CNN
F 1 "CONN_1" H 9250 3955 30 0001 C CNN
F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 1130 2500 60 0001 C CNN
F 3 "" H 9250 3900 60 0001 C CNN
F 4 "DO NOT POPULATE,DNP" V 1130 2500 60 0001 C CNN "MFG,MFG#"
F 5 "DO NOT POPULATE,DNP" V 1130 2500 60 0001 C CNN "VEND1,VEND1#"
1 9250 3900
1 0 0 -1
$EndComp
Wire Wire Line
9100 3900 9100 3950
Connection ~ 9100 3950
$Comp
L CONN_1 P63
U 1 1 58A3238A
P 9250 3800
F 0 "P63" H 9330 3800 40 0000 L CNN
F 1 "CONN_1" H 9250 3855 30 0001 C CNN
F 2 "Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm" V 1130 2400 60 0001 C CNN
F 3 "" H 9250 3800 60 0001 C CNN
F 4 "DO NOT POPULATE,DNP" V 1130 2400 60 0001 C CNN "MFG,MFG#"
F 5 "DO NOT POPULATE,DNP" V 1130 2400 60 0001 C CNN "VEND1,VEND1#"
1 9250 3800
1 0 0 -1
$EndComp
Wire Wire Line
9100 3800 9100 3850
Connection ~ 9100 3850
$EndSCHEMATC

2
hardware/frankenso/known_issues.txt
View File

@ -129,7 +129,7 @@
129) RESOLVED IN R0.5 silkscreen not under but next to component: R1001 R1002 D1001 etc?
130) RESOLVED IN R0.4.3 C472, C354 and C358 are electrolytic in the schematic, change to non polarity dependant symbols to match real world. RESOLVED IN R0.4.2
131) Fix 3D view
132) Add vias to PE5 & PE6 traces (these are input capture options on TIM9)
132) RESOLVED IN R0.5 Add vias to PE5 & PE6 traces (these are input capture options on TIM9)
For honda add-on / rewiring board
-- Add 2A high side solinoid drive for VTec sol

4
java_console/models/src/com/rusefi/config/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config;
// this file was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Feb 12 01:30:52 EST 2017
// this file was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Feb 12 20:28:45 EST 2017
public class Fields {
public static final int LE_COMMAND_LENGTH = 200;
public static final int FSIO_ADC_COUNT = 4;
@ -1510,7 +1510,7 @@ public class Fields {
public static final Field TPSDECELENLEANMENTTHRESHOLD = Field.create("TPSDECELENLEANMENTTHRESHOLD", 2232, FieldType.FLOAT);
public static final Field TPSDECELENLEANMENTMULTIPLIER = Field.create("TPSDECELENLEANMENTMULTIPLIER", 2236, FieldType.FLOAT);
public static final Field SLOWADCALPHA = Field.create("SLOWADCALPHA", 2240, FieldType.FLOAT);
public static final String[] debug_mode_e = {"Alternator_PID", "TPS accel enrich", "Warmup PID", "IDLE", "EL accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT", "Post-crank enrich", "Timing", "Closed-loop fuel corr", "VSS", "SD card", "mode14", "mode15"};
public static final String[] debug_mode_e = {"Alternator_PID", "TPS accel enrich", "Warmup PID", "IDLE", "EL accl enrich", "Trigger Counters", "FSIO_ADC", "AUX_PID_1", "VVT PID", "Cranking", "Timing", "Closed-loop fuel corr", "VSS", "SD card", "mode14", "mode15"};
public static final Field DEBUGMODE = Field.create("DEBUGMODE", 2244, FieldType.INT, debug_mode_e);
public static final Field WARMUPAFRPID_PFACTOR = Field.create("WARMUPAFRPID_PFACTOR", 2248, FieldType.FLOAT);
public static final Field WARMUPAFRPID_IFACTOR = Field.create("WARMUPAFRPID_IFACTOR", 2252, FieldType.FLOAT);