diff --git a/firmware/tunerstudio/rusefi.ini b/firmware/tunerstudio/rusefi.ini
index 4dc8fb24b6..cfaf573583 100644
--- a/firmware/tunerstudio/rusefi.ini
+++ b/firmware/tunerstudio/rusefi.ini
@@ -45,7 +45,7 @@ enable2ndByteCanID = false
 
 ; see PAGE_0_SIZE in C source code    
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Fri May 26 19:55:24 EDT 2017
+; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sat May 27 17:08:16 EDT 2017
 
 pageSize            = 16376
 page = 1
@@ -727,10 +727,10 @@ page = 1
 	ignitionLoadBins				= array, F32,	13688,	[16],	"Load", 1, 0.0, 0, 300.0, 2
 	ignitionRpmBins					= array, F32,	13752,	[16],	"RPM", 1, 0.0, 0, 18000.0, 2
 	veTable						 = array, F32, 13816, [16x16],"%", 1, 0, 0, 999.0, 2
-	veLoadBins						= array, F32,	14840,	[16],	"%", 1, 0.0, 0, 300.0, 2
+	veLoadBins						= array, F32,	14840,	[16],	"kPa", 1, 0.0, 0, 300.0, 2
 	veRpmBins						= array, F32,	14904,	[16],	"RPM", 1, 0.0, 0, 18000.0, 2
 	afrTable					 = array, U08, 14968, [16x16],"deg", 0.1, 0, 0, 25.0, 1
-	afrLoadBins						= array, F32,	15224,	[16],	"%", 1, 0.0, 0, 300.0, 2
+	afrLoadBins						= array, F32,	15224,	[16],	"", 1, 0.0, 0, 300.0, 2
 	afrRpmBins						= array, F32,	15288,	[16],	"RPM", 1, 0.0, 0, 18000.0, 2
 	tpsTpsAccelTable			 = array, F32, 15352, [8x8],"value", 1, 0, 0.0, 30000.0, 2
 	tpsTpsAccelFromRpmBins			= array, F32,	15608,	[8],	"from", 1, 0, 0.0, 30000.0, 2
@@ -1464,7 +1464,7 @@ fileVersion = { 20161225 }
 		subMenu = cltTimingCorrCurve,		"Warmup timing correction"
 		subMenu = std_separator
 		subMenu = fuelTableTbl,				"Fuel Table", 0, {fuelAlgorithm != 3}
-        subMenu = veTableTbl,           	"VE Table", 0, {fuelAlgorithm == 3}
+        subMenu = veTableDialog,           	"VE Table", 0, {fuelAlgorithm == 3}
         subMenu = afrTableTbl,          	"Target AFR Table", 0, {fuelAlgorithm == 3}
 		subMenu = iatFuelCorrCurve,			"Intake air temperature fuel Multiplier"
         subMenu = injPhaseTableTbl,         "Injection Phase"           
@@ -1485,7 +1485,7 @@ fileVersion = { 20161225 }
 ;		subMenu = std_realtime,				"Realtime Display"
 ;		subMenu = std_warmup,				"Warmup Wizard"
 		subMenu = fuelTableMap,				"Fuel Table", 0, {fuelAlgorithm != 3}
-		subMenu = veTableMap,				"VE Table", 0, {fuelAlgorithm == 3}
+		subMenu = veTableDialog3D,			"VE Table", 0, {fuelAlgorithm == 3}
 		subMenu = afrTableMap,				"Target AFR Table", 0, {fuelAlgorithm == 3}
 		subMenu = injPhaseTableMap,			"Injection Phase"
 		subMenu = ignitionTableMap,			"Ignition Table"
@@ -2211,9 +2211,11 @@ cmd_call_from_pit            = "w\x00\x20\x34\x56"
 				
 ;			Tuning->General
 	dialog = generalSettings, "General"
+		field = "http://rusefi.com/support"
 		field = "RPM Hard Limit",         	    		rpmHardLimit
 		field = "Boost Cut Pressure",					boostCutPressure
 		field = ""
+		field = "http://rusefi.com/fuel"
 		field = "Fuel Algorithm",						fuelAlgorithm
 		field = ""
 		field = "#System hack's"
@@ -2346,6 +2348,18 @@ cmd_call_from_pit            = "w\x00\x20\x34\x56"
 		field = "ADC #3",								fsioAdc3
 		field = "ADC #4",								fsioAdc4
 				
+	dialog = veTableDialogNorth
+		field = "Volumetric Efficiency is used to calculate fuel in Speed Density mode"
+		field = "http://rusefi.com/fuel"
+				
+	dialog = veTableDialog, "VE Table"
+		panel = veTableDialogNorth, North
+		panel = veTableTbl, South
+				
+	dialog = veTableDialog3D, "VE Table"
+		panel = veTableDialogNorth, North
+		panel = veTableMap, South
+				
 	dialog = etbDialog, "Electronic Thtottle Body (alpha)"			
 		field = "pedal Position Channel", 				pedalPositionChannel
 		field = "verbose",								isVerboseETB
diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input
index 49f335afb8..5d239a7e8e 100644
--- a/firmware/tunerstudio/rusefi.input
+++ b/firmware/tunerstudio/rusefi.input
@@ -724,7 +724,7 @@ fileVersion = { 20161225 }
 		subMenu = cltTimingCorrCurve,		"Warmup timing correction"
 		subMenu = std_separator
 		subMenu = fuelTableTbl,				"Fuel Table", 0, {fuelAlgorithm != 3}
-        subMenu = veTableTbl,           	"VE Table", 0, {fuelAlgorithm == 3}
+        subMenu = veTableDialog,           	"VE Table", 0, {fuelAlgorithm == 3}
         subMenu = afrTableTbl,          	"Target AFR Table", 0, {fuelAlgorithm == 3}
 		subMenu = iatFuelCorrCurve,			"Intake air temperature fuel Multiplier"
         subMenu = injPhaseTableTbl,         "Injection Phase"           
@@ -745,7 +745,7 @@ fileVersion = { 20161225 }
 ;		subMenu = std_realtime,				"Realtime Display"
 ;		subMenu = std_warmup,				"Warmup Wizard"
 		subMenu = fuelTableMap,				"Fuel Table", 0, {fuelAlgorithm != 3}
-		subMenu = veTableMap,				"VE Table", 0, {fuelAlgorithm == 3}
+		subMenu = veTableDialog3D,			"VE Table", 0, {fuelAlgorithm == 3}
 		subMenu = afrTableMap,				"Target AFR Table", 0, {fuelAlgorithm == 3}
 		subMenu = injPhaseTableMap,			"Injection Phase"
 		subMenu = ignitionTableMap,			"Ignition Table"
@@ -1471,9 +1471,11 @@ cmd_call_from_pit            = "w\x00\x20\x34\x56"
 				
 ;			Tuning->General
 	dialog = generalSettings, "General"
+		field = "http://rusefi.com/support"
 		field = "RPM Hard Limit",         	    		rpmHardLimit
 		field = "Boost Cut Pressure",					boostCutPressure
 		field = ""
+		field = "http://rusefi.com/fuel"
 		field = "Fuel Algorithm",						fuelAlgorithm
 		field = ""
 		field = "#System hack's"
@@ -1606,6 +1608,18 @@ cmd_call_from_pit            = "w\x00\x20\x34\x56"
 		field = "ADC #3",								fsioAdc3
 		field = "ADC #4",								fsioAdc4
 				
+	dialog = veTableDialogNorth
+		field = "Volumetric Efficiency is used to calculate fuel in Speed Density mode"
+		field = "http://rusefi.com/fuel"
+				
+	dialog = veTableDialog, "VE Table"
+		panel = veTableDialogNorth, North
+		panel = veTableTbl, South
+				
+	dialog = veTableDialog3D, "VE Table"
+		panel = veTableDialogNorth, North
+		panel = veTableMap, South
+				
 	dialog = etbDialog, "Electronic Thtottle Body (alpha)"			
 		field = "pedal Position Channel", 				pedalPositionChannel
 		field = "verbose",								isVerboseETB