* ford tps
* configurable maximum
* initialization
* check consistency when in the low range
* print info
* default
* config field
* config parameter
* test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* engine math: extrant getFiringOrderTable for reuse
* engine math: getNextFiringCylinderId helper
* introduce knock_logic: first member is getCylinderKnockBank()
moved from software_knock.cpp
* hip9011: support two inputs/banks
* fix CI
* Board Subaru EG33: populated with TPIC8101 with Advanced mode
* hip9011: test communication in advanced mode
* hip9011: handle situation when chip is already in advanced mode
* Board Subaru EG33: cylinder to knock bank mapping
* hip9011: count spi transactions in advansed mode too
* hip9011: reset incalid responce counter after chip initialization
* hip9011: make debug output more structured
* hip9011: coexistance with other spi devices
* hip9011: rework so SPI transfer is invoked from thread
also use polling spi exchange to avoid cache problems
* hip9011: move calculations from ADC callback to thread
* hip9011: big cleanup
* hip9011: simplify spi communication
* No need to set knockBandCustom if it is not custom
HIP9011 calculates knockBand from cylinderBore same way
* hip9011: make unit test happy
* hip9011: fix unit test
* hip9011: remove duplicated initialization, reorder
* hip9011: just renames and data type adjustments
* hip9011: rename BAND() to HIP9011_BAND()
* hip9011: move some code from lookup.cpp to logic.cpp
* hip9011: move initEngineNoiseTable to engine_configuration.cpp
* hip9011: move lookup tables to hip9011_logic.c
* hip9011: remove empty files
* hip9011: additional checks
* enable
* guard correctly
* h7 bit timing
* allow longer frames
* allow data smaller than maximum
* mcu temperature
* typo
* tx message
* testing
* check for CAN or FDCAN
* don't need that any more
* h7 bitrate config
* undo testing
* h7-ify msg tx
* comment
* break out SID/EID macros
* guard differently
* update ChibiOS
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* hook up lps25
* it would help to include all the files
* unguard some stuff
* unguard more
* guarding
* s
* guard
* only register if init worked
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* vbatt in sensor model
* sensor name
* vbatt
* s
* oy vei
* a little bit of cleanup
* memory apparently
* cj125 test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
* Guard define argument
* ADC: isAdcChannelValid
Check for both <= EFI_ADC_NONE and >= EFI_ADC_LAST_CHANNEL
Also check for value out of enum range (corrupted settings)
* Fix unit tests
* Require redundant tps for ETB (#2037)
* mod sensor api
* require redundancy
* fix tests
* check that it fails
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* add a test that fails but should not
* fix the bug
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* require values to be different
* fix not
* oops
* missed another spot
* test negative cases too
* resets
* test no sensor case
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* add
* remove old
* remove more old
* makefile
* fix init
* patch up other stuff
* actually fix it this time
* raw output channels
* gauges, UI
* scaled channel
* fix field ordering
* Add SW knock control to MRE on AT4
* Update software_knock.cpp
cleanup
* use knock only for final build
* adjust RAM
* Update engine_controller.cpp
Adjust RAM for HW QC special to build
* lambda sens
* fix init
* new sensor aem
* comment
* g
* format
* x
* guard
* fix init for tests
* fix
* put back
* put back
* fix
* fix init
* why is this different
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
* lambda sens
* fix init
* fix
* a test for good measure
* he's climbin in your windows, snatchin you ram up
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* s
* science
* set pin mode
* turn stuff off so it fits
* filtering maybe
* filtering actually works
* generate filter parameters internally
* shorter window
* guard behind enable flag
* use checked in filter
* add biquad reset
* tracing
* const
* exec order
* do it from a thread
* smaller buffer, comment
* configure with header
* only for proteus
* oops
* unused
* not needed
* guards
* pin config
* don't need that include
* precook filter steady state
* define sample rate
* multi cylinder knock
* TS
* only sense when running
* s
* science
* set pin mode
* turn stuff off so it fits
* filtering maybe
* filtering actually works
* generate filter parameters internally
* shorter window
* guard behind enable flag
* use checked in filter
* add biquad reset
* tracing
* const
* exec order
* do it from a thread
* smaller buffer, comment
* configure with header
* only for proteus
* oops
* unused
* not needed
* guards
* pin config
* don't need that include
* precook filter steady state
* define sample rate
* config enable switch
rusefillc
Matthew Kennedy
Andrey
Andrey G
Brenton Hewitt
David Holdeman
shadowm60