Andrey G aecd997d4b OpenBLT shared params (#4417) ... * OpenBLT: linker file: use last 16 bytes of ram for shared area This area is used for communication between FW and OpenBLT. * OpenBLT: startup: invalidate only DFU breadcumb from startup code Same location (but different seed) is used for shared param's signature in OpenBLT. * OpenBLT: enable shared params * OpenBLT: enable hooks If 0x01 is stored in shared param idx=0, then stay in OpenBLT forever. * Jump to OpenBLT: store proper shared param when OpenBLT is requested TODO: calculate and store CRC too! * OpenBLT: move shared_params to start of RAM * Bootloader: Allocate 16 bytes at start of RAM for bootloader shared area * OpenBLT: shared_params: reuse same .c and .h file for main application * OpenBLT: shared_params: enable CRC check * OpenBLT: no need to manualy set breadcumb before reset * Revert "OpenBLT: startup: invalidate only DFU breadcumb from startup code" This reverts commit 6b064714b953560227ae53e38355332cf9f46f7f. * OpenBLT: guard for builds without OpenBLT * OpenBLT: reboot to OpenBLT on CAN request with ID=0x667 and DLC=2 * config: options to enable OpenBLT on CAN interfaces * OpenBLT: comments		2022-08-07 19:33:19 -04:00
..
cypress	Write hard faults to backup ram, print on next boot (#4324)	2022-07-07 15:14:31 -04:00
kinetis	Write hard faults to backup ram, print on next boot (#4324)	2022-07-07 15:14:31 -04:00
stm32	OpenBLT shared params (#4417)	2022-08-07 19:33:19 -04:00
chconf_common.h	get rid of setSerialConfigurationOverrides (#4274)	2022-06-23 19:42:09 -04:00
mpu_util.h	Add "Reset to OpenBLT" button (#4364)	2022-07-22 08:21:11 +03:00
rusefi_halconf.h	500 byte blocking factor (#4227)	2022-06-01 20:27:20 -04:00