58 lines
1.7 KiB
C++
58 lines
1.7 KiB
C++
/**
|
|
* @file subaru.cpp
|
|
*
|
|
* SUBARU_2003_WRX
|
|
* set engine_type 22
|
|
*
|
|
* @date Sep 14, 2014
|
|
* @author Andrey Belomutskiy, (c) 2012-2020
|
|
*/
|
|
|
|
#include "subaru.h"
|
|
#include "custom_engine.h"
|
|
|
|
EXTERN_CONFIG;
|
|
|
|
void setSubaru2003Wrx(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
|
setFrankenso_01_LCD(engineConfiguration);
|
|
setFrankenso0_1_joystick(engineConfiguration);
|
|
|
|
engineConfiguration->trigger.type = TT_TOOTHED_WHEEL;
|
|
engineConfiguration->trigger.customTotalToothCount = 5;
|
|
engineConfiguration->trigger.customSkippedToothCount = 1;
|
|
|
|
engineConfiguration->sensorChartFrequency = 2;
|
|
|
|
engineConfiguration->useStepperIdle = true;
|
|
|
|
// See http://rusefi.com/forum/viewtopic.php?f=4&t=1161
|
|
engineConfiguration->idle.stepperDirectionPin = GPIOD_1; // top stepper drive pin, white wire recommended
|
|
engineConfiguration->idle.stepperStepPin = GPIOD_6; // yellow wire recommended
|
|
engineConfiguration->stepperEnablePin = GPIOB_1; // bottom stepper driver board pin, blue wire recommended
|
|
|
|
engineConfiguration->triggerSimulatorPins[0] = GPIO_UNASSIGNED; // we want to avoid PD1 conflict
|
|
engineConfiguration->triggerSimulatorPins[1] = GPIO_UNASSIGNED;
|
|
engineConfiguration->triggerSimulatorPins[2] = GPIO_UNASSIGNED;
|
|
}
|
|
|
|
/**
|
|
* MRE_SUBARU_EJ18
|
|
* set engine_type 37
|
|
*/
|
|
void setSubaruEJ18_MRE(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
|
engineConfiguration->trigger.type = TT_SUBARU_7_6;
|
|
|
|
CONFIG(isDoubleSolenoidIdle) = true;
|
|
|
|
engineConfiguration->specs.displacement = 1.8;
|
|
strcpy(CONFIG(engineMake), ENGINE_MAKE_SUBARU);
|
|
strcpy(CONFIG(engineCode), "EJ18");
|
|
|
|
engineConfiguration->specs.firingOrder = FO_1_3_2_4;
|
|
|
|
// TLE8888_PIN_23: "33 - GP Out 3"
|
|
engineConfiguration->malfunctionIndicatorPin = TLE8888_PIN_23;
|
|
|
|
|
|
}
|