rusefi
/
custom-board-bundle-sample-fork-of-rusefi
mirror of https://github.com/rusefi/custom-board-bundle-sample-fork-of-rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
16,099 Commits 27 Branches 160 Tags 977 MiB
C 61.8%
Java 21.4%
C++ 14.8%
Makefile 0.6%
Python 0.5%
Other 0.8%
Go to file
Andrey G e3be563b27
Openblt (#3430) 
* Makefile: define BOOTLOADER=1 for linker in case of OpenBLT too

This will reserve first 32K of flash for bootloader.

* OpenBLT: include into build

* board: subaru eg33: add OpenBLT board code

* board: subaru eg33: use OpenBLT

* Board: Subaru EG33: OpenBLT: reuse HAL and CMSIS from OpenBLT submodule

* Board: Subaru EG33: OpenBLT: reuse linker file from OpenBLT too

* OpenBLT for MRE

* OpenBLT: MRE: adjust LD memory map for smallest variat of MCU on MRE

* OpenBLT: enable for MRE

* OpenBLT: disable CRC check of user application

This allows us to use DFU tool to flash main application too.

* hex2dfu: fresh binary for linux

* OpenBLT: extract common part of OpenBLT makefiles to openblt.mk

* OpenBLT: enable CRC check of user application for MRE and EG33

CRC (actually just a summ) of few first vectors is stored at 0x1c
offset. This is reserved vector for Cortex-M3, M4 and M7

* common_make: append OpenBLT CRC to dfu files

This should allow to use DFU to do main application update when
when OpenBLT is used as bootloader. hex2dfu will store same
styled CRC as OpenBLT expects to see in user app.

* OpenBLT reorganization

Move common stuff to hw_layer/ports/

* OpenBLT: proteus

* Proteus: enable OpenBLT for F4 and F7

Compilation tested only
 		2021-11-05 19:28:55 -04:00
.github Use SSH for remaining workflows (#3407) 2021-10-25 08:22:31 -04:00
.vscode enable ethernet on atlas (#3348) 2021-10-16 12:31:53 -04:00
android helping android build? 2021-10-13 21:49:53 -04:00
firmware Openblt (#3430) 2021-11-05 19:28:55 -04:00
hardware eb70637ed6 2021-11-04 15:53:57 -04:00
java_console Auto-generated configs and docs 2021-11-05 22:21:29 +00:00
java_tools Determine the correct mul/div for autoscale from the TS config line instead of specifying it twice. (#3470) 2021-11-05 19:26:25 -04:00
misc Openblt (#3430) 2021-11-05 19:28:55 -04:00
simulator export board-specific macro for stm32 pins based on board yaml #3298 2021-10-26 10:27:10 -04:00
unit_tests Trigger wheel definitions 2021-11-05 22:25:35 +00:00
.gitattributes
…
.gitignore Move pinouts to pages.rusefi.com #170 2021-10-13 21:25:29 -04:00
.gitmodules hex2dfu as proper submodule 2021-11-05 11:50:33 -04:00
README.md
…
lgtm.yml
…
work_in_progress.md
…

README.md

rusEFI

GPL open-source DIY ECU

Release Last Commit Rusefi on Slack

rusEFI

Current binaries are always available on our build server

paypal

Tindie

Cloning the repository

Important note - we now use submodules:

git submodule update --init

What do we have here?

External Links

Building the Code

See https://rusefi.com/forum/viewtopic.php?f=5&t=9

Release Notes

Release date Revision Details
10/28/2020 changelog has moved
07/26/2020 r24635 improvement #1637: DC motor idle air valve for late 90s German vehicles
07/21/2020 bugfix #1592 injectors could stay open on transition from cranking to running under certain conditions
06/17/2020 r23656 bugfix #1491 major performance/scheduling improvement
05/21/2020 r22961 rusEFI console start-up time improvements
04/18/2020 r22231 Renix 44-2-2 trigger support added
04/02/2020 Start button feature
03/28/2020 Critical error text is now displayed in TunerStudio
03/26/2020 Multi-spark feature
09/05/2019 r19849 Electronic Throttle Body including idle control seems to work
07/28/2019 r19612 improvement #809: software jump to DFU
04/25/2019 r17317 bugfix #775: electrical noise reboot during settings change causes with full tune loss
04/07/2019 r17098 improvement #714: TLE8888 Enable Outputs SPI integration
02/27/2019 r16886 bugfix #698: concurrency defect with single timer executor initialization
02/23/2019 r16857 improvement #688: better support for 144 and 176 pin packages
02/05/2019 r16713 improvement #631: ChibiOS 18
01/11/2019 r16346 bugfix #663: SPI fixes for CJ125 for stm32 errata STM32f405/7/15/17
12/09/2018 r16057 electronic throttle body control is now BETA version
08/19/2018 r15811 bugfix #604: no interpolation outside of the table
01/29/2018 r15514 improvement #215: CJ125 wideband controller
01/23/2018 r15442 improvement #463: ChibiOS 17 / 4
01/07/2018 r14952 usability & minor bugfix #532 idle defaults are broken
12/17/2017 r14892 bugfix #513: console: erase on older chips does not work
11/26/2017 r14789 bugfix #500: set_rpn_expression command is broken
11/23/2017 r14779 bugfix #497: engine does not start with SD card
11/19/2017 r14766 improvement #496: console flasher to support older boards
11/19/2017 r14760 improvement #495: incompatible change - larger settings area
11/06/2017 r14733 improvement #487: single-point injection mode
10/26/2017 r14700 improvement #385: narrow band to wide band conversion table
08/31/2017 improvement #442: ADC_VCC should be configurable
07/24/2017 r14513 bugfix #307: TS bench test blinks three times
07/13/2017 r14476 bugfix #461: SAXParserException on console start-up due to damaged settings.xml file
07/09/2017 r14473 improvement: IAC solenoid frequency changeable on the fly
06/19/2017 r14393 bugfix: pinMode, milMode
05/27/2017 r14221 improvement: ochGetCommand to support offset and count
05/05/2017 r13974 bugfix #404: 36/1 FATAL error: angle range trgSync
05/03/2017 r13967 improvement: ChibiOS 3.2
04/06/2017 r13759 major improvement #72: ChibiOS 3.1
03/26/2017 r13330 super annoying bug #336 fixed
03/20/2017 r13233 improvements #375 & #376: hard FPU mode & migrating to fresh version of arm gcc
03/19/2017 r13223 bugfix #374: persistent configuration starts to touch firmware - settings would need to be reloaded
03/09/2017 r13146 bugfix #370: duty cycle vs error code 6050
03/06/2017 r13123 bugfix #363: 2/1 skipped wheel is a corner-case
03/05/2017 r13108 bugfix #363: trigger front only processing
02/22/2017 r12980 bugfix: false error message in case of single coil or simultaneous injection
02/22/2017 r12973 unused property 'custom Use Rise Edge' removed
02/22/2017 r12972 protocol signature changed to 'v0.02' (this would happen from time to time to ensure version match between console and TS project
02/20/2017 r12939 https://github.com/rusefi/rusefi is now the official primary repository
02/18/2017 r11565 improvement: level1 default brown out https://sourceforge.net/p/rusefi/tickets/354/
02/18/2017 r11554 bugfix: rusEfi console program/erase buttons fixed with ST-LINK 2.1
12/09/2016 r10991 bugfixes, bugfixes, bugfixes & release 1.0
02/15/2016 r9600 automatic warm-up fuel correction, performance improvements
08/31/2015 r8725 acceleration fuel correction, console improvements
07/06/2015 r8554 more CAN, better console, bugfixes, performance
04/26/2015 r7938 vehicle speed sensor, stepper idle valve, lots of improvements
11/13/2014 r5327 ChibiOS/RT 2.6.6, better cold start logic, bugfixes, bugfixes, bugfixes...
06/12/2014 r3477 Precise event scheduling, protocol selection
03/26/2014 r2413 C++, refactoring & improvements
02/23/2013 r1777 trigger is now configurable via TunerStudio
01/30/2014 r1309 true trigger angles, VBatt signal
01/12/2014 r1007 refactoring, refactoring & refactoring
12/19/2013 r605 ignition control & a little bit of CAN bus
11/08/2013 r100 Tuner Studio fuel map tuning, fuel pump control
10/14/2013 r39 USB serial bug, missing IAR files, self-contained Makefile
10/13/2013 r33 IAR project file
10/04/2013 r26 Patched ChibiOS/RT 2.6.1 sources are now included
09/23/2013 r20 Tuner Studio integration, configuration persistence
08/30/2013 r14 initial documentation & refactoring. tunerstudio integration
08/03/2013 r13 wideband O2 input, better idling algorithm, serial-over-USB
07/05/2013 r10 Second CKP, sequential injection.
06/19/2013 r9 Initial version - batch injection & ignition with advance table lookup.