wow progress
This commit is contained in:
parent
6cd8ce7b92
commit
5c51399a23
18
board.h
18
board.h
|
@ -10,4 +10,22 @@
|
|||
#define LED_CRITICAL_ERROR_BRAIN_PIN Gpio::Unassigned
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: LSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 0U
|
||||
#endif
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 8000000U
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Board voltages.
|
||||
* Required for performance limits calculation.
|
||||
*/
|
||||
#define STM32_VDD 300U
|
||||
|
||||
#endif /* _BOARD_H_ */
|
||||
|
|
2
board.mk
2
board.mk
|
@ -5,5 +5,5 @@ DDEFS += -DAT32F435xx
|
|||
|
||||
# well, LOL
|
||||
#DDEFS += -DSTM32F437xx
|
||||
DDEFS += -DSTM32F4xx_MCUCONF
|
||||
# DDEFS += -DSTM32F4xx_MCUCONF
|
||||
#DDEFS += -DSTM32F437_MCUCONF
|
||||
|
|
|
@ -134,7 +134,7 @@
|
|||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_WAIT FALSE
|
||||
#define PAL_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
|
|
406
mcuconf.h
406
mcuconf.h
|
@ -1 +1,407 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
/*
|
||||
* STM32F4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F4xx_MCUCONF
|
||||
#define STM32F437_MCUCONF
|
||||
|
||||
/*
|
||||
* Config pll clock resource
|
||||
* common frequency config list: pll source selected hick or hext (8mhz)
|
||||
* _________________________________________________________________________________________________
|
||||
* | | | | | | | | | | |
|
||||
* |pll(mhz)| 288 | 252 | 216 | 192 | 180 | 144 | 108 | 72 | 36 |
|
||||
* |________|_________|_________|_________|_________|_________|_________|_________|_________________|
|
||||
* | | | | | | | | | | |
|
||||
* |pll_ns | 144 | 126 | 108 | 96 | 90 | 72 | 108 | 72 | 72 |
|
||||
* | | | | | | | | | | |
|
||||
* |pll_ms | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
||||
* | | | | | | | | | | |
|
||||
* |pll_fr | FR_4 | FR_4 | FR_4 | FR_4 | FR_4 | FR_4 | FR_8 | FR_8 | FR_16|
|
||||
* |________|_________|_________|_________|_________|_________|_________|_________|________|________|
|
||||
*
|
||||
* if pll clock source selects hext with other frequency values, or configure pll to other
|
||||
* frequency values, please use the at32 new clock configuration tool for configuration.
|
||||
*/
|
||||
|
||||
#if 0
|
||||
/* Defaults for 96MHz from DS */
|
||||
#define STM32_PLLM_VALUE 2
|
||||
#define STM32_PLLN_VALUE 192
|
||||
#define STM32_PLLP_VALUE 8
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV1 /* max 144 MHz */
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1 /* max 144 MHz */
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
/* 144 MHz */
|
||||
#define STM32_PLLM_VALUE 1
|
||||
#define STM32_PLLN_VALUE 72
|
||||
#define STM32_PLLP_VALUE 4
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV1 /* max 144 MHz */
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1 /* max 144 MHz */
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
/* 216 MHz */
|
||||
#define STM32_PLLM_VALUE 1
|
||||
#define STM32_PLLN_VALUE 108
|
||||
#define STM32_PLLP_VALUE 4
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2 /* max 144 MHz */
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2 /* max 144 MHz */
|
||||
#endif
|
||||
|
||||
#if 1
|
||||
/* 288 MHz */
|
||||
#define STM32_PLLM_VALUE 1
|
||||
#define STM32_PLLN_VALUE 144
|
||||
#define STM32_PLLP_VALUE 4
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2 /* max 144 MHz */
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2 /* max 144 MHz */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_BKPRAM_ENABLE FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_CLOCK48_REQUIRED TRUE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_RTCPRE_VALUE 8
|
||||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI
|
||||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
|
||||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
|
||||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI16_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI21_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI22_PRIORITY 15
|
||||
|
||||
#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM2_PRIORITY 7
|
||||
#define STM32_IRQ_TIM3_PRIORITY 7
|
||||
#define STM32_IRQ_TIM4_PRIORITY 7
|
||||
#define STM32_IRQ_TIM5_PRIORITY 7
|
||||
#define STM32_IRQ_TIM6_PRIORITY 7
|
||||
#define STM32_IRQ_TIM7_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_CC_PRIORITY 7
|
||||
|
||||
#define STM32_IRQ_USART1_PRIORITY 12
|
||||
#define STM32_IRQ_USART2_PRIORITY 12
|
||||
#define STM32_IRQ_USART3_PRIORITY 12
|
||||
#define STM32_IRQ_UART4_PRIORITY 12
|
||||
#define STM32_IRQ_UART5_PRIORITY 12
|
||||
#define STM32_IRQ_USART6_PRIORITY 12
|
||||
#define STM32_IRQ_UART7_PRIORITY 12
|
||||
#define STM32_IRQ_UART8_PRIORITY 12
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_USE_ADC3 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#define STM32_CAN_USE_CAN2 FALSE
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
#define STM32_CAN_CAN2_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM9 FALSE
|
||||
#define STM32_GPT_USE_TIM10 FALSE
|
||||
#define STM32_GPT_USE_TIM11 FALSE
|
||||
#define STM32_GPT_USE_TIM12 FALSE
|
||||
#define STM32_GPT_USE_TIM13 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* I2S driver system settings.
|
||||
*/
|
||||
#define STM32_I2S_USE_SPI2 FALSE
|
||||
#define STM32_I2S_USE_SPI3 FALSE
|
||||
#define STM32_I2S_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_I2S_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_I2S_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_I2S_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM9 FALSE
|
||||
#define STM32_ICU_USE_TIM10 FALSE
|
||||
#define STM32_ICU_USE_TIM11 FALSE
|
||||
#define STM32_ICU_USE_TIM12 FALSE
|
||||
#define STM32_ICU_USE_TIM13 FALSE
|
||||
#define STM32_ICU_USE_TIM14 FALSE
|
||||
|
||||
/*
|
||||
* MAC driver system settings.
|
||||
*/
|
||||
#define STM32_MAC_TRANSMIT_BUFFERS 2
|
||||
#define STM32_MAC_RECEIVE_BUFFERS 4
|
||||
#define STM32_MAC_BUFFERS_SIZE 1522
|
||||
#define STM32_MAC_PHY_TIMEOUT 100
|
||||
#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
|
||||
#define STM32_MAC_ETH1_IRQ_PRIORITY 13
|
||||
#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM9 FALSE
|
||||
#define STM32_PWM_USE_TIM10 FALSE
|
||||
#define STM32_PWM_USE_TIM11 FALSE
|
||||
#define STM32_PWM_USE_TIM12 FALSE
|
||||
#define STM32_PWM_USE_TIM13 FALSE
|
||||
#define STM32_PWM_USE_TIM14 FALSE
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
#define STM32_RTC_PRESA_VALUE 32
|
||||
#define STM32_RTC_PRESS_VALUE 1024
|
||||
#define STM32_RTC_CR_INIT 0
|
||||
#define STM32_RTC_TAMPCR_INIT 0
|
||||
|
||||
/*
|
||||
* SDC driver system settings.
|
||||
*/
|
||||
#define STM32_SDC_SDIO_DMA_PRIORITY 3
|
||||
#define STM32_SDC_SDIO_IRQ_PRIORITY 9
|
||||
#define STM32_SDC_WRITE_TIMEOUT_MS 1000
|
||||
#define STM32_SDC_READ_TIMEOUT_MS 1000
|
||||
#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
|
||||
#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
|
||||
#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 TRUE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USE_USART6 FALSE
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_USE_SPI4 FALSE
|
||||
#define STM32_SPI_USE_SPI5 FALSE
|
||||
#define STM32_SPI_USE_SPI6 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
|
||||
#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
||||
#define STM32_SPI_SPI6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
|
||||
#define STM32_SPI_SPI6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI4_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI5_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI6_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI4_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI5_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI6_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_UART4 FALSE
|
||||
#define STM32_UART_USE_UART5 FALSE
|
||||
#define STM32_UART_USE_USART6 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART4_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART5_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART6_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_OTG1 FALSE
|
||||
#define STM32_USB_USE_OTG2 FALSE
|
||||
#define STM32_USB_OTG1_IRQ_PRIORITY 14
|
||||
#define STM32_USB_OTG2_IRQ_PRIORITY 14
|
||||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512
|
||||
#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
|
||||
#define STM32_USB_HOST_WAKEUP_DURATION 2
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
|
|
|
@ -0,0 +1,17 @@
|
|||
#pragma once
|
||||
|
||||
#define US_TO_NT_MULTIPLIER (CORE_CLOCK / 1000000)
|
||||
|
||||
// todo: huh? is this universal?
|
||||
typedef enum {
|
||||
BOR_Level_None = 0,
|
||||
BOR_Level_1 = 1,
|
||||
BOR_Level_2 = 2,
|
||||
BOR_Level_3 = 3
|
||||
} BOR_Level_t;
|
||||
|
||||
#define PORT_SIZE 16
|
||||
|
||||
#ifdef __cplusplus
|
||||
void stm32_standby();
|
||||
#endif
|
Loading…
Reference in New Issue