From f910309e2af1907dc3ed97f81ed3a061197e783a Mon Sep 17 00:00:00 2001 From: GitHub git update Action Date: Mon, 4 Dec 2023 15:41:16 +0000 Subject: [PATCH] GHA Automation Snapshot just for reference --- generated/rusefi_XXX.ini | 8825 ++++++++++++++++++++++++++++++++++ generated/rusefi_generated.h | 1521 ++++++ generated/signature_XXX.h | 6 + 3 files changed, 10352 insertions(+) create mode 100644 generated/rusefi_XXX.ini create mode 100644 generated/rusefi_generated.h create mode 100644 generated/signature_XXX.h diff --git a/generated/rusefi_XXX.ini b/generated/rusefi_XXX.ini new file mode 100644 index 0000000..6f64240 --- /dev/null +++ b/generated/rusefi_XXX.ini @@ -0,0 +1,8825 @@ +; This is a TunerStudio project for the rusEFI.com engine management system +; +; This file has been generated by invoking gen_config.bat. +; The input files are +; rusefi.input the common template +; rusefi_config.txt the project specific file +; +; In TunerStudio some fields have little question mark on the left of the name for additional field tips. +; Those tips are defined in ../integration/rusefi_config.txt +; +; For example +; +; float bias_resistor;Pull-up resistor value on your board;"Ohm" +; here 'bias_resistor' is internal field name and the text between semicolons is what produces the tooltip +; Note that '+' sign is required after first semicolon for tooltop to appear in TunerStudio +; +; +; field = "# blue text" +; field = "! red text" +; field = "normal text" +; +; pok +; + +; this should stop TS from looking for the CAN ID in the 2nd byte location and allow the page reads to work correctly. +enable2ndByteCanID = false + +[SettingGroups] + ; the referenceName will over-ride previous, so if you are creating a + ; settingGroup with a reference name of lambdaSensor, it will replace the + ; setting group defined in the settingGroups.xml of the TunerStudio config + ; folder. If is is an undefined referenceName, it will be added. + ; keyword = referenceName, DisplayName + +[MegaTune] + ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 + signature = "rusEFI default.2023.12.04.XXX.2192944932" + +[TunerStudio] + queryCommand = "S" + versionInfo = "V" ; firmware version for title bar. + signature= "rusEFI default.2023.12.04.XXX.2192944932" ; signature is expected to be 7 or more characters. + + ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C + useLegacyFTempUnits = false + ignoreMissingBitOptions = true + + ; Optimize comms for fast rusEFI ECUs + noCommReadDelay = true; + defaultRuntimeRecordPerSec = 100; + maxUnusedRuntimeRange = 1000; + + ; Set default IP/port to our IP/port + defaultIpAddress = 192.168.10.1; + defaultIpPort = 29000; + +[Constants] +; new packet serial format with CRC + messageEnvelopeFormat = msEnvelope_1.0 + + endianness = little + nPages = 1 + + pageIdentifier = "\x00\x00" + pageReadCommand = "R%2o%2c" + burnCommand = "B" + pageActivate = "P" + pageValueWrite = "W%2o%v" + pageChunkWrite = "C%2o%2c%v" + crc32CheckCommand = "k%2o%2c" + retrieveConfigError = "e" + +;communication settings + pageActivationDelay = 500 ; Milliseconds delay after burn command. See https://sourceforge.net/p/rusefi/tickets/77/ +;e.g. put writeblocks off and add an interwrite delay + writeBlocks = on + interWriteDelay = 10 + blockReadTimeout = 3000; Milliseconds general timeout + + ; delayAfterPortOpen = 500 + + blockingFactor = 750 ; max chunk size +;end communication settings + + ; name = bits, type, offset, bits + ; name = array, type, offset, shape, units, scale, translate, lo, hi, digits + ; name = scalar, type, offset, units, scale, translate, lo, hi, digits +#define gpio_list="NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define switch_input_pin_e_list="NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define output_pin_e_list="NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "MC33972_1", "MC33972_2", "MC33972_3", "MC33972_4", "MC33972_5", "MC33972_6", "MC33972_7", "MC33972_8", "MC33972_9", "MC33972_10", "MC33972_11", "MC33972_12", "MC33972_13", "MC33972_14", "MC33972_15", "MC33972_16", "MC33972_17", "MC33972_18", "MC33972_19", "MC33972_20", "MC33972_21", "MC33972_22", "TLE8888_1", "TLE8888_2", "TLE8888_3", "TLE8888_4", "TLE8888_5", "TLE8888_6", "TLE8888_7", "TLE8888_8", "TLE8888_9", "TLE8888_10", "TLE8888_11", "TLE8888_12", "TLE8888_13", "TLE8888_14", "TLE8888_15", "TLE8888_16", "TLE8888_17", "TLE8888_18", "TLE8888_19", "TLE8888_20", "TLE8888_21", "TLE8888_22", "TLE8888_23", "TLE8888_24", "TLE8888_25", "TLE8888_26", "TLE8888_27", "TLE8888_28", "INVALID", "INVALID", "INVALID", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16", "L215", "L216", "L217", "L218", "L219", "L220", "L221", "L222", "L223", "L224", "L225", "L226", "L227", "L228", "L229", "L230", "L231", "L232", "L233", "L234", "L235", "L236", "L237", "L238", "L239", "L240", "L241", "L242", "L243", "L244", "L245", "L246", "L247", "L248", "can0", "can1", "can2", "can3", "can4", "can5", "can6", "can7", "protected_0", "protected_1", "protected_2", "protected_3", "protected_4", "protected_5", "protected_6", "protected_7", "protected_8", "protected_9", "protected_10", "protected_11", "protected_12", "protected_13", "protected_14", "protected_15", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "MC33810_0_OUT_0", "MC33810_0_OUT_1", "MC33810_0_OUT_2", "MC33810_0_OUT_3", "MC33810_0_GD_0", "MC33810_0_GD_1", "MC33810_0_GD_2", "MC33810_0_GD_3" +#define brain_input_pin_e_list="NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" + +; CONFIG_DEFINITION_START +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Mon Dec 04 15:41:10 UTC 2023 + +pageSize = 23880 +page = 1 +engineType = bits, U16, 0, [0:6], 0="DEFAULT_FRANKENSO",97="ALPHAX_8CHAN_SBC",24="BMW_M73_M",50="BMW_M73_MRE",51="BMW_M73_MRE_SLAVE",35="CAMARO_4",65="CITROEN_TU3JP",38="DISCOVERY_PDM",2="DODGE_NEON_1995",46="DODGE_NEON_2003_CRANK",64="DODGE_RAM",61="EEPROM_BENCH_ENGINE",58="ETB_BENCH_ENGINE",3="FORD_ASPIRE_1996",11="FORD_COYOTE",14="FORD_ESCORT_GT",7="FORD_INLINE_6_1995",40="FRANKENSO_BMW_M73_F",47="FRANKENSO_MAZDA_MIATA_2003",56="FRANKENSO_MAZDA_MIATA_NA8",41="FRANKENSO_MIATA_NA6_MAP",49="FRANKENSO_QA_ENGINE",59="FRANKENSO_TEST_33810",15="FUEL_BENCH",8="GY6_139QMB",84="HELLEN_121_NISSAN_4_CYL",72="HELLEN_121_NISSAN_6_CYL",85="HELLEN_121_NISSAN_8_CYL",87="HELLEN_121_NISSAN_ALMERA_N16",71="HELLEN_121_VAG_4_CYL",77="HELLEN_121_VAG_5_CYL",81="HELLEN_121_VAG_8_CYL",78="HELLEN_121_VAG_V6_CYL",79="HELLEN_121_VAG_VR6_CYL",36="HELLEN_128_MERCEDES_4_CYL",88="HELLEN_128_MERCEDES_6_CYL",89="HELLEN_128_MERCEDES_8_CYL",82="HELLEN_154_HYUNDAI_COUPE_BK1",95="HELLEN_154_HYUNDAI_COUPE_BK2",76="HELLEN_154_VAG",75="HELLEN_2CHAN_STIM_QC",74="HELLEN_4CHAN_STIM_QC",57="HELLEN_HONDA_BCM",34="HELLEN_NA6",10="HELLEN_NA8_96",80="HELLEN_NA94",83="HELLEN_NB1",94="HELLEN_NB1_36",69="HELLEN_NB2",86="HELLEN_NB2_36",43="HONDA_600",90="HONDA_K",104="HYUNDAI_PB",60="L9779_BENCH_ENGINE",54="MAVERICK_X3",55="MAZDA_MIATA_2003_BOARD_TEST",33="ME17_9_MISC",21="MIATA_1996",1="MIATA_PROTEUS_TCU",99="MINIMAL_PINS",12="MITSUBISHI_3A92",16="MITSUBISHI_4G93",31="MRE_BOARD_NEW_TEST",23="MRE_BODY_CONTROL",68="MRE_M111",20="MRE_MIATA_94_MAP",66="MRE_MIATA_NA6_MAP",4="MRE_SECONDARY_CAN",37="MRE_SUBARU_EJ18",62="MRE_VW_B6",5="NISSAN_PRIMERA",30="PROTEUS_ANALOG_PWM_TEST",63="PROTEUS_BMW_M73",9="PROTEUS_E65_6H_MAN_IN_THE_MIDDLE",27="PROTEUS_GM_LS_4",6="PROTEUS_HARLEY",91="PROTEUS_HONDA_OBD2A",25="PROTEUS_LUA_DEMO",17="PROTEUS_M111",67="PROTEUS_MIATA_NB2",93="PROTEUS_N73",103="PROTEUS_NISSAN_VQ35",42="PROTEUS_QC_TEST_BOARD",98="PROTEUS_SBC",73="PROTEUS_STIM_QC",39="PROTEUS_VW_B6",29="SACHS",92="SIMULATOR_CONFIG",70="SUBARUEG33_DEFAULTS",22="SUBARU_2003_WRX",100="TEST_100",101="TEST_101",102="TEST_102",18="TEST_33816",28="TEST_CRANK_ENGINE",48="TEST_DC_WASTEGATE_DISCOVERY",26="TEST_ENGINE",45="TEST_ENGINE_VVT",52="TEST_ISSUE_366_BOTH",53="TEST_ISSUE_366_RISE",19="TEST_ROTARY",13="TOYOTA_1NZ_FE",44="TOYOTA_2JZ_GTE_VVTi",32="VW_ABA",96="WASTEGATE_PROTEUS_TEST" +startButtonSuppressOnStartUpMs = scalar, U16, 2, "", 1, 0, 0, 32000, 0 +sensorSnifferRpmThreshold = scalar, U16, 4, "RPM", 1, 0, 0, 10000, 0 +launchRpm = scalar, U16, 6, "rpm", 1, 0, 0, 20000, 0 +rpmHardLimit = scalar, U16, 8, "rpm", 1, 0, 0, 20000, 0 +engineSnifferRpmThreshold = scalar, U16, 10, "RPM", 1, 0, 0, 30000, 0 +multisparkMaxRpm = scalar, U08, 12, "rpm", 50.0, 0, 0, 3000, 0 +maxAcRpm = scalar, U08, 13, "rpm", 50.0, 0, 0, 10000, 0 +maxAcTps = scalar, U08, 14, "%", 1, 0, 0, 100, 0 +maxAcClt = scalar, U08, 15, "deg C", 1, 0, 0, 150, 0 +knockNoiseRpmBins = array, U16, 16, [16], "RPM", 1, 0, 0, 30000, 0 +multisparkMaxSparkingAngle = scalar, U08, 48, "deg", 1, 0, 0, 60, 0 +multisparkMaxExtraSparkCount = scalar, U08, 49, "count", 1, 0, 1, 5, 0 +injector_flow = scalar, F32, 52, "cm3/min", 1, 0, 0, 99999, 2 +injector_battLagCorrBins = array, F32, 56, [8], "volts", 1, 0, 0, 20, 2 +injector_battLagCorr = array, F32, 88, [8], "ms", 1, 0, 0, 50, 2 +isForcedInduction = bits, U32, 120, [0:0], "false", "true" +useFordRedundantTps = bits, U32, 120, [1:1], "false", "true" +enableKline = bits, U32, 120, [2:2], "false", "true" +overrideTriggerGaps = bits, U32, 120, [3:3], "false", "true" +enableFan1WithAc = bits, U32, 120, [4:4], "false", "true" +enableFan2WithAc = bits, U32, 120, [5:5], "false", "true" +disableFan1WhenStopped = bits, U32, 120, [6:6], "false", "true" +disableFan2WhenStopped = bits, U32, 120, [7:7], "false", "true" +enableTrailingSparks = bits, U32, 120, [8:8], "false", "true" +etb_use_two_wires = bits, U32, 120, [9:9], "false", "true" +isDoubleSolenoidIdle = bits, U32, 120, [10:10], "false", "true" +useEeprom = bits, U32, 120, [11:11], "false", "true" +useCicPidForIdle = bits, U32, 120, [12:12], "false", "true" +useTLE8888_cranking_hack = bits, U32, 120, [13:13], "false", "true" +kickStartCranking = bits, U32, 120, [14:14], "false", "true" +useSeparateIdleTablesForCrankingTaper = bits, U32, 120, [15:15], "false", "true" +launchControlEnabled = bits, U32, 120, [16:16], "false", "true" +doNotFilterTriggerEdgeNoise = bits, U32, 120, [17:17], "with filter", "without filter" +antiLagEnabled = bits, U32, 120, [18:18], "false", "true" +useRunningMathForCranking = bits, U32, 120, [19:19], "Fixed", "Fuel Map" +displayLogicLevelsInEngineSniffer = bits, U32, 120, [20:20], "false", "true" +useTLE8888_stepper = bits, U32, 120, [21:21], "false", "true" +usescriptTableForCanSniffingFiltering = bits, U32, 120, [22:22], "false", "true" +verboseCan = bits, U32, 120, [23:23], "Do not print", "Print all" +artificialTestMisfire = bits, U32, 120, [24:24], "No thank you", "Danger Mode" +useFordRedundantPps = bits, U32, 120, [25:25], "false", "true" +cltSensorPulldown = bits, U32, 120, [26:26], "false", "true" +iatSensorPulldown = bits, U32, 120, [27:27], "false", "true" +allowIdenticalPps = bits, U32, 120, [28:28], "false", "true" +overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true" +unused30 = bits, U32, 120, [30:30], "false", "true" +unused31 = bits, U32, 120, [31:31], "false", "true" +tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0 +tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0 +tpsErrorDetectionTooLow = scalar, S16, 128, "%", 1, 0, -10, 0, 0 +tpsErrorDetectionTooHigh = scalar, S16, 130, "%", 1, 0, 100, 110, 0 +cranking_baseFuel = scalar, F32, 132, "mg", 1, 0, 0, 500, 1 +cranking_rpm = scalar, S16, 136, "RPM", 1, 0, 0, 12000, 0 +ignitionDwellForCrankingMs = scalar, F32, 140, "ms", 1, 0, 0, 200, 1 +etbRevLimitStart = scalar, U16, 144, "rpm", 1, 0, 0, 15000, 0 +etbRevLimitRange = scalar, U16, 146, "rpm", 1, 0, 0, 2000, 0 +map_samplingAngleBins = array, F32, 148, [8], "", 1, 0, 0, 18000, 2 +map_samplingAngle = array, F32, 180, [8], "deg", 1, 0, -720, 720, 2 +map_samplingWindowBins = array, F32, 212, [8], "", 1, 0, 0, 18000, 2 +map_samplingWindow = array, F32, 244, [8], "deg", 1, 0, -720, 720, 2 +map_sensor_lowValue = scalar, F32, 276, "kpa", 1, 0, -400, 800, 2 +map_sensor_highValue = scalar, F32, 280, "kpa", 1, 0, -400, 800, 2 +map_sensor_type = bits, U08, 284, [0:4], "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "GM 3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "Bosch 2.5", "Mazda1Bar", "GM 2 Bar", "GM 1 Bar", "MPXH6400", "MPXH6300" +map_sensor_hwChannel = bits, U08, 285, [0:5], $adc_channel_e_list +clt_tempC_1 = scalar, F32, 288, "*C", 1, 0, -40, 200, 1 +clt_tempC_2 = scalar, F32, 292, "*C", 1, 0, -40, 200, 1 +clt_tempC_3 = scalar, F32, 296, "*C", 1, 0, -40, 200, 1 +clt_resistance_1 = scalar, F32, 300, "Ohm", 1, 0, 0, 200000, 1 +clt_resistance_2 = scalar, F32, 304, "Ohm", 1, 0, 0, 200000, 1 +clt_resistance_3 = scalar, F32, 308, "Ohm", 1, 0, 0, 200000, 1 +clt_bias_resistor = scalar, F32, 312, "Ohm", 1, 0, 0, 200000, 1 +clt_adcChannel = bits, U08, 316, [0:5], $adc_channel_e_list +iat_tempC_1 = scalar, F32, 320, "*C", 1, 0, -40, 200, 1 +iat_tempC_2 = scalar, F32, 324, "*C", 1, 0, -40, 200, 1 +iat_tempC_3 = scalar, F32, 328, "*C", 1, 0, -40, 200, 1 +iat_resistance_1 = scalar, F32, 332, "Ohm", 1, 0, 0, 200000, 1 +iat_resistance_2 = scalar, F32, 336, "Ohm", 1, 0, 0, 200000, 1 +iat_resistance_3 = scalar, F32, 340, "Ohm", 1, 0, 0, 200000, 1 +iat_bias_resistor = scalar, F32, 344, "Ohm", 1, 0, 0, 200000, 1 +iat_adcChannel = bits, U08, 348, [0:5], $adc_channel_e_list +launchTimingRetard = scalar, S32, 352, "deg", 1, 0, -180, 180, 2 +hip9011PrescalerAndSDO = scalar, S32, 356, "integer", 1, 0, 0, 32, 0 +knockBandCustom = scalar, F32, 360, "kHz", 1, 0, 0, 20, 2 +displacement = scalar, U16, 364, "L", 0.001, 0, 0, 65, 3 +triggerSimulatorRpm = scalar, U16, 366, "RPM", 1, 0, 0, 30000, 0 +cylindersCount = scalar, U32, 368, "", 1, 0, 1, 12, 0 +firingOrder = bits, U08, 372, [0:5], "One Cylinder", "1-3-4-2", "1-2-4-3", "1-3-2-4", "1-5-3-6-2-4", "1-8-4-3-6-5-7-2", "1-2-4-5-3", "1-4-2-5-3-6", "1-2", "1-2-3-4-5-6", "1-2-3", "1-8-7-2-6-5-4-3", "1-5-4-2-6-3-7-8", "1-6-3-2-5-4", "1-10-9-4-3-6-5-8-7_2", "1-7-5-11-3-9-6-12-2-8-4-10", "1-7-4-10-2-8-6-12-3-9-5-11", "1-4-3-2", "1-12-5-8-3-10-6-7-2-11-4-9", "1-2-7-8-4-5-6-3", "1-3-7-2-6-5-4-8", "1-2-3-4-5-6-7-8-9", "INVALID", "1-2-3-4-5-6-7-8-9-10-11-12", "1-3-2", "1-2-3-4-5-6-7-8", "1-5-4-8-6-3-7-2", "1-4-3-6-2-5", "1-8-7-3-6-5-4-2", "1-6-2-4-3-5", "1-6-5-4-3-2", "1-4-5-2-3-6", "fo32", "fo33", "fo34", "fo35", "fo36", "fo37" +cylinderBore = scalar, F32, 376, "mm", 1, 0, 0, 20000, 2 +fuelAlgorithm = bits, U08, 380, [0:2], "Speed Density", "MAF Air Charge", "Alpha-N", "Lua" +ALSMaxTPS = scalar, U08, 381, "%", 1, 0, 0, 10, 0 +crankingInjectionMode = bits, U08, 382, [0:1], "Simultaneous", "Sequential", "Batch", "Single Point" +injectionMode = bits, U08, 383, [0:1], "Simultaneous", "Sequential", "Batch", "Single Point" +boostControlMinRpm = scalar, U16, 384, "", 1, 0, 0, 25000, 0 +boostControlMinTps = scalar, U08, 386, "", 1, 0, 0, 100, 0 +boostControlMinMap = scalar, U08, 387, "", 1, 0, 0, 250, 0 +crankingTimingAngle = scalar, F32, 388, "deg", 1, 0, -30, 30, 0 +ignitionMode = bits, U08, 392, [0:1], "Single Coil", "Individual Coils", "Wasted Spark", "Two Distributors" +gapTrackingLengthOverride = scalar, S08, 393, "count", 1, 0, 1, 18, 0 +maxIdleVss = scalar, U08, 394, "kph", 1, 0, 0, 100, 0 +minOilPressureAfterStart = scalar, U16, 396, "kPa", 1, 0, 0, 1000, 0 +timingMode = bits, U08, 398, [0:0], "dynamic", "fixed" +fixedModeTiming = scalar, F32, 400, "RPM", 1, 0, 0, 3000, 0 +globalTriggerAngleOffset = scalar, F32, 404, "deg btdc", 1, 0, -720, 720, 0 +analogInputDividerCoefficient = scalar, F32, 408, "coef", 1, 0, 0.01, 10, 2 +vbattDividerCoeff = scalar, F32, 412, "coef", 1, 0, 0.01, 99, 2 +fanOnTemperature = scalar, F32, 416, "deg C", 1, 0, 0, 150, 0 +fanOffTemperature = scalar, F32, 420, "deg C", 1, 0, 0, 150, 0 +acrPin = bits, U16, 424, [0:8], $output_pin_e_list +driveWheelRevPerKm = scalar, F32, 428, "revs/km", 1, 0, 100, 1000, 1 +canNbcType = bits, U08, 432, [0:4], "None", "FIAT", "VAG", "MAZDA RX8", "BMW E46", "W202", "BMW E90", "Haltech", "VAG MQB", "Nissan VQ35", "Genesis Coupe", "Honda K", "AiM", "MS Simplified Broadcast", "type 14" +canSleepPeriodMs = scalar, S32, 436, "ms", 1, 0, 0, 1000, 2 +camDecoder2jzPrecision = scalar, U08, 440, "", 1, 0, 0, 100, 0 +byFirmwareVersion = scalar, S32, 444, "index", 1, 0, 0, 300, 0 +tps1_1AdcChannel = bits, U08, 448, [0:5], $adc_channel_e_list +vbattAdcChannel = bits, U08, 449, [0:5], $adc_channel_e_list +fuelLevelSensor = bits, U08, 450, [0:5], $adc_channel_e_list +tps2_1AdcChannel = bits, U08, 451, [0:5], $adc_channel_e_list +idle_derivativeFilterLoss = scalar, F32, 452, "x", 1, 0, -1000000, 1000000, 4 +trailingSparkAngle = scalar, S32, 456, "angle", 1, 0, 0, 720, 0 +trigger_type = bits, U32, 460, [0:6], "custom toothed wheel", "Ford Aspire", "Dodge Neon 1995", "Miata NA", "INVALID", "GM_7X", "Cooper R50", "Mazda SOHC 4", "60/2", "36/1", "Mercedes Two Segment", "Single Tooth", "EZ30", "INVALID", "Dodge Neon 2003", "Mazda DOHC 1+4", "1+1", "INVALID", "Half Moon", "Dodge Ram 1+16", "60/2 VW", "Benelli Tre", "Dodge Stratus", "36_2_2_2", "Nissan Primera", "dev 2JZ 3/34 simulator", "Rover K", "GM 24x 5 degree", "Honda CBR 600", "Mitsubishi 4G92/93/94 Cam 29", "Honda CBR 600 custom", "3/1 skipped", "Dodge Neon 2003 crank", "Miata NB", "Mitsubishi 4G63 Cam 34", "INVALID", "Subaru 7+6", "Jeep 18-2-2-2", "12 tooth crank", "Dodge Neon 1995 crank only", "Jeep XJ 4 cyl", "FiatIAQ_P8", "Mazda Z5", "INVALID", "Renix 44-2-2", "Renix 66-2-2-2", "Honda K 12+1", "INVALID", "36/2", "Subaru SVX", "1+16", "Subaru 7 without 6", "INVALID", "TriTach", "GM 60/2/2/2", "Skoda Favorit", "Barra 3+1 Cam", "Kawa KX450F", "Nissan VQ35", "INVALID", "Nissan VQ30", "Nissan QR25", "INVALID", "Subaru SVX Crank 1", "Subaru SVX Cam VVT", "Ford PIP", "Suzuki G13B", "Honda K 4+1", "Nissan MR18 Crank", "32/2", "36-2-1", "36-2-1-1", "INVALID", "INVALID", "GM 24x 3 degree", "60-2-2 F3R", "Mitsu 4G63 Crank", "x2 30 Deg camshaft BTDC", "INVALID", "Mitsu 6G72 Cam", "trg80", "trg81" +trigger_customTotalToothCount = scalar, S32, 464, "number", 1, 0, 1, 300, 0 +trigger_customSkippedToothCount = scalar, S32, 468, "number", 1, 0, 0, 300, 0 +airByRpmTaper = scalar, F32, 472, "%", 1, 0, 0, 50, 1 +hip9011SpiDevice = bits, U08, 476, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +boostControlSafeDutyCycle = scalar, U08, 477, "%", 1, 0, 0, 100, 0 +mafAdcChannel = bits, U08, 478, [0:5], $adc_channel_e_list +acrRevolutions = scalar, U08, 479, "", 1, 0, 0, 100, 0 +globalFuelCorrection = scalar, F32, 480, "coef", 1, 0, 0, 1000, 2 +adcVcc = scalar, F32, 484, "volts", 1, 0, 0, 6, 3 +mapCamDetectionAnglePosition = scalar, F32, 488, "Deg", 1, 0, 0, 360, 0 +camInputs1 = bits, U16, 492, [0:7], $brain_input_pin_e_list +camInputs2 = bits, U16, 494, [0:7], $brain_input_pin_e_list +camInputs3 = bits, U16, 496, [0:7], $brain_input_pin_e_list +camInputs4 = bits, U16, 498, [0:7], $brain_input_pin_e_list +afr_hwChannel = bits, U08, 500, [0:5], $adc_channel_e_list +afr_hwChannel2 = bits, U08, 501, [0:5], $adc_channel_e_list +afr_v1 = scalar, F32, 504, "volts", 1, 0, 0, 10, 2 +afr_value1 = scalar, F32, 508, "AFR", 1, 0, 0, 1000, 2 +afr_v2 = scalar, F32, 512, "volts", 1, 0, 0, 10, 2 +afr_value2 = scalar, F32, 516, "AFR", 1, 0, 0, 1000, 2 +throttlePedalPositionAdcChannel = bits, U08, 520, [0:5], $adc_channel_e_list +etbSplit = scalar, U08, 521, "%", 0.1, 0, 0, 20, 1 +tle6240_cs = bits, U16, 522, [0:7], $gpio_list +tle6240_csPinMode = bits, U08, 524, [0:1], "default", "default inverted", "open collector", "open collector inverted" +mc33810_csPinMode = bits, U08, 525, [0:1], "default", "default inverted", "open collector", "open collector inverted" +throttlePedalUpPin = bits, U16, 526, [0:7], $switch_input_pin_e_list +baroSensor_lowValue = scalar, F32, 528, "kpa", 1, 0, -400, 800, 2 +baroSensor_highValue = scalar, F32, 532, "kpa", 1, 0, -400, 800, 2 +baroSensor_type = bits, U08, 536, [0:4], "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "GM 3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "Bosch 2.5", "Mazda1Bar", "GM 2 Bar", "GM 1 Bar", "MPXH6400", "MPXH6300" +baroSensor_hwChannel = bits, U08, 537, [0:5], $adc_channel_e_list +idle_solenoidFrequency = scalar, S32, 540, "Hz", 1, 0, 0, 3000, 0 +idle_solenoidPin = bits, U16, 544, [0:8], $output_pin_e_list +idle_stepperDirectionPin = bits, U16, 546, [0:7], $gpio_list +idle_stepperStepPin = bits, U16, 548, [0:7], $gpio_list +idle_solenoidPinMode = bits, U08, 550, [0:1], "default", "default inverted", "open collector", "open collector inverted" +manIdlePosition = scalar, F32, 552, "%", 1, 0, 0, 100, 0 +knockRetardAggression = scalar, U08, 556, "%", 0.1, 0, 0, 20, 1 +knockRetardReapplyRate = scalar, U08, 557, "deg/s", 0.1, 0, 0, 10, 1 +engineSyncCam = bits, S08, 558, [0:1], "Intake First Bank", "Exhaust First Bank", "Intake Second Bank", "Exhaust Second Bank" +vssFilterReciprocal = scalar, U08, 559, "", 1, 0, 3, 200 0 +vssGearRatio = scalar, U16, 560, "ratio", 0.001, 0, 0, 60, 3 +vssToothCount = scalar, U08, 562, "count", 1, 0, 1, 100, 0 +idleVeOverrideMode = bits, U08, 563, [0:1], "None", "MAP", "TPS" +l9779_cs = bits, U16, 564, [0:7], $gpio_list +injectionPins1 = bits, U16, 566, [0:8], $output_pin_e_list +injectionPins2 = bits, U16, 568, [0:8], $output_pin_e_list +injectionPins3 = bits, U16, 570, [0:8], $output_pin_e_list +injectionPins4 = bits, U16, 572, [0:8], $output_pin_e_list +injectionPins5 = bits, U16, 574, [0:8], $output_pin_e_list +injectionPins6 = bits, U16, 576, [0:8], $output_pin_e_list +injectionPins7 = bits, U16, 578, [0:8], $output_pin_e_list +injectionPins8 = bits, U16, 580, [0:8], $output_pin_e_list +injectionPins9 = bits, U16, 582, [0:8], $output_pin_e_list +injectionPins10 = bits, U16, 584, [0:8], $output_pin_e_list +injectionPins11 = bits, U16, 586, [0:8], $output_pin_e_list +injectionPins12 = bits, U16, 588, [0:8], $output_pin_e_list +ignitionPins1 = bits, U16, 590, [0:8], $output_pin_e_list +ignitionPins2 = bits, U16, 592, [0:8], $output_pin_e_list +ignitionPins3 = bits, U16, 594, [0:8], $output_pin_e_list +ignitionPins4 = bits, U16, 596, [0:8], $output_pin_e_list +ignitionPins5 = bits, U16, 598, [0:8], $output_pin_e_list +ignitionPins6 = bits, U16, 600, [0:8], $output_pin_e_list +ignitionPins7 = bits, U16, 602, [0:8], $output_pin_e_list +ignitionPins8 = bits, U16, 604, [0:8], $output_pin_e_list +ignitionPins9 = bits, U16, 606, [0:8], $output_pin_e_list +ignitionPins10 = bits, U16, 608, [0:8], $output_pin_e_list +ignitionPins11 = bits, U16, 610, [0:8], $output_pin_e_list +ignitionPins12 = bits, U16, 612, [0:8], $output_pin_e_list +injectionPinMode = bits, U08, 614, [0:1], "default", "default inverted", "open collector", "open collector inverted" +ignitionPinMode = bits, U08, 615, [0:1], "default", "default inverted", "open collector", "open collector inverted" +fuelPumpPin = bits, U16, 616, [0:8], $output_pin_e_list +fuelPumpPinMode = bits, U08, 618, [0:1], "default", "default inverted", "open collector", "open collector inverted" +gapVvtTrackingLengthOverride = scalar, S08, 619, "count", 1, 0, 1, 4, 0 +malfunctionIndicatorPin = bits, U16, 620, [0:8], $output_pin_e_list +malfunctionIndicatorPinMode = bits, U08, 622, [0:1], "default", "default inverted", "open collector", "open collector inverted" +fanPinMode = bits, U08, 623, [0:1], "default", "default inverted", "open collector", "open collector inverted" +fanPin = bits, U16, 624, [0:8], $output_pin_e_list +clutchDownPin = bits, U16, 626, [0:7], $switch_input_pin_e_list +alternatorControlPin = bits, U16, 628, [0:8], $output_pin_e_list +alternatorControlPinMode = bits, U08, 630, [0:1], "default", "default inverted", "open collector", "open collector inverted" +clutchDownPinMode = bits, U08, 631, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +digitalPotentiometerChipSelect1 = bits, U16, 632, [0:7], $gpio_list +digitalPotentiometerChipSelect2 = bits, U16, 634, [0:7], $gpio_list +digitalPotentiometerChipSelect3 = bits, U16, 636, [0:7], $gpio_list +digitalPotentiometerChipSelect4 = bits, U16, 638, [0:7], $gpio_list +electronicThrottlePin1Mode = bits, U08, 640, [0:1], "default", "default inverted", "open collector", "open collector inverted" +max31855spiDevice = bits, U08, 641, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +debugTriggerSync = bits, U16, 642, [0:7], $gpio_list +digitalPotentiometerSpiDevice = bits, U08, 644, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +mc33972_cs = bits, U16, 646, [0:7], $gpio_list +mc33972_csPinMode = bits, U08, 648, [0:1], "default", "default inverted", "open collector", "open collector inverted" +auxFastSensor1_adcChannel = bits, U08, 649, [0:5], $adc_channel_e_list +tps1_2AdcChannel = bits, U08, 650, [0:5], $adc_channel_e_list +tps2_2AdcChannel = bits, U08, 651, [0:5], $adc_channel_e_list +throttlePedalPositionSecondAdcChannel = bits, U08, 652, [0:5], $adc_channel_e_list +fuelLevelValues = array, U08, 653, [8], "%", 1, 0, 0, 100, 0 +afr_type = bits, S08, 661, [0:2], "BPSX", "Innovate", "14Point7", "Narrow", "PLX", "Custom", "AEM" +mc33810_cs1 = bits, U16, 662, [0:7], $gpio_list +idle_antiwindupFreq = scalar, F32, 664, "x", 1, 0, -1000000, 1000000, 4 +triggerInputPins1 = bits, U16, 668, [0:7], $brain_input_pin_e_list +triggerInputPins2 = bits, U16, 670, [0:7], $brain_input_pin_e_list +mc33_t_min_boost = scalar, U16, 672, "us", 1, 0, 0, 10000, 0 +hip9011CsPinMode = bits, U08, 674, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tachOutputPin = bits, U16, 676, [0:8], $output_pin_e_list +tachOutputPinMode = bits, U08, 678, [0:1], "default", "default inverted", "open collector", "open collector inverted" +mainRelayPin = bits, U16, 680, [0:8], $output_pin_e_list +sdCardCsPin = bits, U16, 682, [0:7], $gpio_list +canTxPin = bits, U16, 684, [0:7], $gpio_list +canRxPin = bits, U16, 686, [0:7], $gpio_list +throttlePedalUpPinMode = bits, U08, 688, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +acIdleExtraOffset = scalar, U08, 689, "%", 1, 0, 0, 100, 0 +finalGearRatio = scalar, U16, 690, "ratio", 0.01, 0, 0, 10, 2 +tcuInputSpeedSensorPin = bits, U16, 692, [0:7], $brain_input_pin_e_list +tcuInputSpeedSensorTeeth = scalar, U08, 694, "", 1, 0, 0, 100, 0 +wastegatePositionMin = scalar, U16, 696, "mv", 1, 0, 0, 5000, 0 +wastegatePositionMax = scalar, U16, 698, "mv", 1, 0, 0, 5000, 0 +idlePositionMin = scalar, U16, 700, "mv", 1, 0, 0, 5000, 0 +idlePositionMax = scalar, U16, 702, "mv", 1, 0, 0, 5000, 0 +tunerStudioSerialSpeed = scalar, U32, 704, "BPs", 1, 0, 0, 1000000, 0 +compressionRatio = scalar, F32, 708, "CR", 1, 0, 0, 300, 1 +triggerSimulatorPins1 = bits, U16, 712, [0:7], $gpio_list +triggerSimulatorPins2 = bits, U16, 714, [0:7], $gpio_list +fordInjectorSmallPulseSlope = scalar, U16, 716, "g/s", 0.001, 0, 0, 65, 3 +triggerSimulatorPinModes1 = bits, U08, 718, [0:1], "default", "default inverted", "open collector", "open collector inverted" +triggerSimulatorPinModes2 = bits, U08, 719, [0:1], "default", "default inverted", "open collector", "open collector inverted" +maf2AdcChannel = bits, U08, 720, [0:5], $adc_channel_e_list +o2heaterPin = bits, U16, 722, [0:8], $output_pin_e_list +o2heaterPinModeTodO = bits, U08, 724, [0:1], "default", "default inverted", "open collector", "open collector inverted" +lambdaProtectionMinRpm = scalar, U08, 725, "RPM", 100.0, 0, 0, 25000, 0 +lambdaProtectionMinLoad = scalar, U08, 726, "%", 10.0, 0, 0, 1000, 0 +is_enabled_spi_1 = bits, U32, 728, [0:0], "false", "true" +is_enabled_spi_2 = bits, U32, 728, [1:1], "false", "true" +is_enabled_spi_3 = bits, U32, 728, [2:2], "false", "true" +isSdCardEnabled = bits, U32, 728, [3:3], "false", "true" +rusefiVerbose29b = bits, U32, 728, [4:4], "11 bit", "29 bit" +rethrowHardFault = bits, U32, 728, [5:5], "false", "true" +isHip9011Enabled = bits, U32, 728, [6:6], "false", "true" +requireFootOnBrakeToCrank = bits, U32, 728, [7:7], "false", "true" +verboseQuad = bits, U32, 728, [8:8], "false", "true" +useStepperIdle = bits, U32, 728, [9:9], "false", "true" +enabledStep1Limiter = bits, U32, 728, [10:10], "false", "true" +useTpicAdvancedMode = bits, U32, 728, [11:11], "false", "true" +lambdaProtectionEnable = bits, U32, 728, [12:12], "false", "true" +verboseTLE8888 = bits, U32, 728, [13:13], "false", "true" +enableVerboseCanTx = bits, U32, 728, [14:14], "false", "true" +etb1configured = bits, U32, 728, [15:15], "false", "true" +etb2configured = bits, U32, 728, [16:16], "false", "true" +measureMapOnlyInOneCylinder = bits, U32, 728, [17:17], "false", "true" +stepperForceParkingEveryRestart = bits, U32, 728, [18:18], "false", "true" +isFasterEngineSpinUpEnabled = bits, U32, 728, [19:19], "false", "true" +coastingFuelCutEnabled = bits, U32, 728, [20:20], "false", "true" +useIacTableForCoasting = bits, U32, 728, [21:21], "false", "true" +useNoiselessTriggerDecoder = bits, U32, 728, [22:22], "false", "true" +useIdleTimingPidControl = bits, U32, 728, [23:23], "false", "true" +disableEtbWhenEngineStopped = bits, U32, 728, [24:24], "false", "true" +is_enabled_spi_4 = bits, U32, 728, [25:25], "false", "true" +pauseEtbControl = bits, U32, 728, [26:26], "false", "true" +alignEngineSnifferAtTDC = bits, U32, 728, [27:27], "false", "true" +verboseKLine = bits, U32, 728, [28:28], "false", "true" +idleIncrementalPidCic = bits, U32, 728, [29:29], "false", "true" +enableAemXSeries = bits, U32, 728, [30:30], "false", "true" +logicAnalyzerPins1 = bits, U16, 732, [0:7], $brain_input_pin_e_list +logicAnalyzerPins2 = bits, U16, 734, [0:7], $brain_input_pin_e_list +logicAnalyzerPins3 = bits, U16, 736, [0:7], $brain_input_pin_e_list +logicAnalyzerPins4 = bits, U16, 738, [0:7], $brain_input_pin_e_list +mainRelayPinMode = bits, U08, 740, [0:1], "default", "default inverted", "open collector", "open collector inverted" +hip9011CsPin = bits, U16, 742, [0:7], $gpio_list +hip9011IntHoldPin = bits, U16, 744, [0:7], $gpio_list +hip9011IntHoldPinMode = bits, U08, 746, [0:1], "default", "default inverted", "open collector", "open collector inverted" +verboseCanBaseAddress = scalar, U32, 748, "", 1, 0, 0, 536870911, 0 +mc33_hvolt = scalar, U08, 752, "v", 1, 0, 40, 70, 0 +minimumBoostClosedLoopMap = scalar, U08, 753, "kPa", 1, 0, 0, 255, 0 +acFanPin = bits, U16, 754, [0:8], $output_pin_e_list +acFanPinMode = bits, U08, 756, [0:1], "default", "default inverted", "open collector", "open collector inverted" +l9779spiDevice = bits, U08, 757, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +dwellVoltageCorrVoltBins = array, U08, 758, [8], "volts", 0.1, 0, 0, 20, 1 +imuType = bits, U08, 766, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" +dwellVoltageCorrValues = array, U08, 767, [8], "multiplier", 0.02, 0, 0, 5, 2 +vehicleWeight = scalar, U16, 776, "kg", 1, 0, 0, 10000, 0 +idlePidRpmUpperLimit = scalar, S16, 778, "RPM", 1, 0, 0, 500, 0 +applyNonlinearBelowPulse = scalar, U16, 780, "ms", 0.001, 0, 0, 30, 3 +lps25BaroSensorScl = bits, U16, 782, [0:7], $gpio_list +lps25BaroSensorSda = bits, U16, 784, [0:7], $gpio_list +vehicleSpeedSensorInputPin = bits, U16, 786, [0:7], $brain_input_pin_e_list +clutchUpPin = bits, U16, 788, [0:7], $switch_input_pin_e_list +injectorNonlinearMode = bits, U08, 790, [0:1], "None", "Polynomial", "Ford (dual slope)" +clutchUpPinMode = bits, U08, 791, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +max31855_cs1 = bits, U16, 792, [0:7], $gpio_list +max31855_cs2 = bits, U16, 794, [0:7], $gpio_list +max31855_cs3 = bits, U16, 796, [0:7], $gpio_list +max31855_cs4 = bits, U16, 798, [0:7], $gpio_list +max31855_cs5 = bits, U16, 800, [0:7], $gpio_list +max31855_cs6 = bits, U16, 802, [0:7], $gpio_list +max31855_cs7 = bits, U16, 804, [0:7], $gpio_list +max31855_cs8 = bits, U16, 806, [0:7], $gpio_list +flexSensorPin = bits, U16, 808, [0:7], $brain_input_pin_e_list +test557pin = bits, U16, 810, [0:7], $gpio_list +stepperDirectionPinMode = bits, U08, 812, [0:1], "default", "default inverted", "open collector", "open collector inverted" +mc33972spiDevice = bits, U08, 813, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +stoichRatioSecondary = scalar, U08, 814, ":1", 0.1, 0, 5, 25, 1 +etbMaximumPosition = scalar, U08, 815, "%", 1, 0, 70, 100, 0 +sdCardLogFrequency = scalar, U16, 816, "hz", 1, 0, 1, 250, 0 +idlePositionChannel = bits, U08, 818, [0:5], $adc_channel_e_list +debugMapAveraging = bits, U16, 820, [0:7], $gpio_list +starterRelayDisablePin = bits, U16, 822, [0:8], $output_pin_e_list +starterRelayDisablePinMode = bits, U08, 824, [0:1], "default", "default inverted", "open collector", "open collector inverted" +secondSolenoidPin = bits, U16, 826, [0:8], $output_pin_e_list +startStopButtonPin = bits, U16, 828, [0:7], $switch_input_pin_e_list +mapMinBufferLength = scalar, S32, 832, "count", 1, 0, 1, 24, 0 +idlePidDeactivationTpsThreshold = scalar, S16, 836, "%", 1, 0, 0, 50, 0 +stepperParkingExtraSteps = scalar, S16, 838, "%", 1, 0, 0, 3000, 0 +tps1SecondaryMin = scalar, U16, 840, "ADC", 1, 0, 0, 1000, 0 +tps1SecondaryMax = scalar, U16, 842, "ADC", 1, 0, 0, 1000, 0 +antiLagRpmTreshold = scalar, S16, 844, "rpm", 1, 0, 0, 20000, 0 +startCrankingDuration = scalar, U16, 846, "Seconds", 1, 0, 0, 30, 0 +triggerErrorPin = bits, U16, 848, [0:7], $gpio_list +triggerErrorPinMode = bits, U08, 850, [0:1], "default", "default inverted", "open collector", "open collector inverted" +acRelayPin = bits, U16, 852, [0:8], $output_pin_e_list +lambdaProtectionMinTps = scalar, U08, 854, "%", 1, 0, 0, 100, 0 +lambdaProtectionTimeout = scalar, U08, 855, "s", 0.1, 0, 0, 10, 1 +lambdaProtectionRestoreRpm = scalar, U08, 856, "RPM", 100.0, 0, 0, 25000, 0 +acRelayPinMode = bits, U08, 857, [0:1], "default", "default inverted", "open collector", "open collector inverted" +scriptSetting1 = scalar, F32, 860, "", 1, 0, 0, 18000, 2 +scriptSetting2 = scalar, F32, 864, "", 1, 0, 0, 18000, 2 +scriptSetting3 = scalar, F32, 868, "", 1, 0, 0, 18000, 2 +scriptSetting4 = scalar, F32, 872, "", 1, 0, 0, 18000, 2 +scriptSetting5 = scalar, F32, 876, "", 1, 0, 0, 18000, 2 +scriptSetting6 = scalar, F32, 880, "", 1, 0, 0, 18000, 2 +scriptSetting7 = scalar, F32, 884, "", 1, 0, 0, 18000, 2 +scriptSetting8 = scalar, F32, 888, "", 1, 0, 0, 18000, 2 +spi1mosiPin = bits, U16, 892, [0:7], $gpio_list +spi1misoPin = bits, U16, 894, [0:7], $gpio_list +spi1sckPin = bits, U16, 896, [0:7], $gpio_list +spi2mosiPin = bits, U16, 898, [0:7], $gpio_list +spi2misoPin = bits, U16, 900, [0:7], $gpio_list +spi2sckPin = bits, U16, 902, [0:7], $gpio_list +spi3mosiPin = bits, U16, 904, [0:7], $gpio_list +spi3misoPin = bits, U16, 906, [0:7], $gpio_list +spi3sckPin = bits, U16, 908, [0:7], $gpio_list +cdmInputPin = bits, U16, 910, [0:7], $gpio_list +consoleUartDevice = bits, U08, 912, [0:1], "Off", "UART1", "UART2", "UART3" +sensorChartMode = bits, S08, 913, [0:2], "none", "trigger", "INVALID", "RPM ACCEL", "DETAILED RPM", "Fast Aux1" +mafSensorType = bits, S08, 914, [0:1], "v0", "v1", "v2", "v3" +clutchUpPinInverted = bits, U32, 916, [0:0], "false", "true" +clutchDownPinInverted = bits, U32, 916, [1:1], "false", "true" +useHbridgesToDriveIdleStepper = bits, U32, 916, [2:2], "false", "true" +multisparkEnable = bits, U32, 916, [3:3], "false", "true" +enableLaunchRetard = bits, U32, 916, [4:4], "false", "true" +unfinishedenableLaunchBoost = bits, U32, 916, [5:5], "false", "true" +consumeObdSensors = bits, U32, 916, [6:6], "false", "true" +enableCanVss = bits, U32, 916, [7:7], "false", "true" +enableInnovateLC2 = bits, U32, 916, [8:8], "false", "true" +showHumanReadableWarning = bits, U32, 916, [9:9], "false", "true" +stftIgnoreErrorMagnitude = bits, U32, 916, [10:10], "false", "true" +vvtBooleanForVerySpecialCases = bits, U32, 916, [11:11], "false", "true" +enableSoftwareKnock = bits, U32, 916, [12:12], "false", "true" +verboseVVTDecoding = bits, U32, 916, [13:13], "false", "true" +invertCamVVTSignal = bits, U32, 916, [14:14], "false", "true" +alphaNUseIat = bits, U32, 916, [15:15], "false", "true" +knockBankCyl1 = bits, U32, 916, [16:16], "Channel 1", "Channel 2" +knockBankCyl2 = bits, U32, 916, [17:17], "Channel 1", "Channel 2" +knockBankCyl3 = bits, U32, 916, [18:18], "Channel 1", "Channel 2" +knockBankCyl4 = bits, U32, 916, [19:19], "Channel 1", "Channel 2" +knockBankCyl5 = bits, U32, 916, [20:20], "Channel 1", "Channel 2" +knockBankCyl6 = bits, U32, 916, [21:21], "Channel 1", "Channel 2" +knockBankCyl7 = bits, U32, 916, [22:22], "Channel 1", "Channel 2" +knockBankCyl8 = bits, U32, 916, [23:23], "Channel 1", "Channel 2" +knockBankCyl9 = bits, U32, 916, [24:24], "Channel 1", "Channel 2" +knockBankCyl10 = bits, U32, 916, [25:25], "Channel 1", "Channel 2" +knockBankCyl11 = bits, U32, 916, [26:26], "Channel 1", "Channel 2" +knockBankCyl12 = bits, U32, 916, [27:27], "Channel 1", "Channel 2" +tcuEnabled = bits, U32, 916, [28:28], "false", "true" +canBroadcastUseChannelTwo = bits, U32, 916, [29:29], "first", "second" +useRawOutputToDriveIdleStepper = bits, U32, 916, [30:30], "false", "true" +verboseCan2 = bits, U32, 916, [31:31], "Do not print", "Print all" +etbIo1_directionPin1 = bits, U16, 920, [0:7], $gpio_list +etbIo1_directionPin2 = bits, U16, 922, [0:7], $gpio_list +etbIo1_controlPin = bits, U16, 924, [0:7], $gpio_list +etbIo1_disablePin = bits, U16, 926, [0:7], $gpio_list +etbIo2_directionPin1 = bits, U16, 928, [0:7], $gpio_list +etbIo2_directionPin2 = bits, U16, 930, [0:7], $gpio_list +etbIo2_controlPin = bits, U16, 932, [0:7], $gpio_list +etbIo2_disablePin = bits, U16, 934, [0:7], $gpio_list +boostControlPin = bits, U16, 936, [0:8], $output_pin_e_list +boostControlPinMode = bits, U08, 938, [0:1], "default", "default inverted", "open collector", "open collector inverted" +ALSActivatePin = bits, U16, 940, [0:7], $switch_input_pin_e_list +launchActivatePin = bits, U16, 942, [0:7], $switch_input_pin_e_list +boostPid_pFactor = scalar, F32, 944, "", 1, 0, -10000, 10000, 4 +boostPid_iFactor = scalar, F32, 948, "", 1, 0, -10000, 10000, 4 +boostPid_dFactor = scalar, F32, 952, "", 1, 0, -10000, 10000, 4 +boostPid_offset = scalar, S16, 956, "", 1, 0, -1000, 1000, 0 +boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0 +boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0 +boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0 +boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop" +boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0 +launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)" +antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active" +launchSpeedThreshold = scalar, S32, 976, "Kph", 1, 0, 0, 300, 0 +launchTimingRpmRange = scalar, S32, 980, "RPM", 1, 0, 0, 8000, 0 +launchFuelAdded = scalar, S32, 984, "%", 1, 0, 0, 100, 0 +launchBoostDuty = scalar, S32, 988, "%", 1, 0, 0, 100, 0 +hardCutRpmRange = scalar, S32, 992, "RPM", 1, 0, 0, 3000, 0 +turbochargerFilter = scalar, F32, 996, "", 1, 0, 0, 100, 0 +launchTpsThreshold = scalar, S32, 1000, "", 1, 0, 0, 20000, 0 +launchActivateDelay = scalar, F32, 1004, "", 1, 0, 0, 20000, 0 +stft_maxIdleRegionRpm = scalar, U08, 1008, "RPM", 50.0, 0, 0, 12000, 0 +stft_maxOverrunLoad = scalar, U08, 1009, "load", 1, 0, 0, 250, 0 +stft_minPowerLoad = scalar, U08, 1010, "load", 1, 0, 0, 250, 0 +stft_deadband = scalar, U08, 1011, "%", 0.1, 0, 0, 3, 1 +stft_minClt = scalar, S08, 1012, "C", 1, 0, -20, 100, 0 +stft_minAfr = scalar, U08, 1013, "afr", 0.1, 0, 10, 20, 1 +stft_maxAfr = scalar, U08, 1014, "afr", 0.1, 0, 10, 20, 1 +stft_startupDelay = scalar, U08, 1015, "seconds", 1, 0, 0, 250, 0 +stft_cellCfgs1_maxAdd = scalar, S08, 1016, "%", 1, 0, 0, 25, 0 +stft_cellCfgs1_maxRemove = scalar, S08, 1017, "%", 1, 0, -25, 0, 0 +stft_cellCfgs1_timeConstant = scalar, U16, 1018, "sec", 0.1, 0, 0.1, 100, 2 +stft_cellCfgs2_maxAdd = scalar, S08, 1020, "%", 1, 0, 0, 25, 0 +stft_cellCfgs2_maxRemove = scalar, S08, 1021, "%", 1, 0, -25, 0, 0 +stft_cellCfgs2_timeConstant = scalar, U16, 1022, "sec", 0.1, 0, 0.1, 100, 2 +stft_cellCfgs3_maxAdd = scalar, S08, 1024, "%", 1, 0, 0, 25, 0 +stft_cellCfgs3_maxRemove = scalar, S08, 1025, "%", 1, 0, -25, 0, 0 +stft_cellCfgs3_timeConstant = scalar, U16, 1026, "sec", 0.1, 0, 0.1, 100, 2 +stft_cellCfgs4_maxAdd = scalar, S08, 1028, "%", 1, 0, 0, 25, 0 +stft_cellCfgs4_maxRemove = scalar, S08, 1029, "%", 1, 0, -25, 0, 0 +stft_cellCfgs4_timeConstant = scalar, U16, 1030, "sec", 0.1, 0, 0.1, 100, 2 +stepperDcIo1_directionPin1 = bits, U16, 1032, [0:7], $gpio_list +stepperDcIo1_directionPin2 = bits, U16, 1034, [0:7], $gpio_list +stepperDcIo1_controlPin = bits, U16, 1036, [0:7], $gpio_list +stepperDcIo1_disablePin = bits, U16, 1038, [0:7], $gpio_list +stepperDcIo2_directionPin1 = bits, U16, 1040, [0:7], $gpio_list +stepperDcIo2_directionPin2 = bits, U16, 1042, [0:7], $gpio_list +stepperDcIo2_controlPin = bits, U16, 1044, [0:7], $gpio_list +stepperDcIo2_disablePin = bits, U16, 1046, [0:7], $gpio_list +engineMake = string, ASCII, 1048, 32 +engineCode = string, ASCII, 1080, 32 +vehicleName = string, ASCII, 1112, 32 +tcu_solenoid1 = bits, U16, 1144, [0:8], $output_pin_e_list +tcu_solenoid2 = bits, U16, 1146, [0:8], $output_pin_e_list +tcu_solenoid3 = bits, U16, 1148, [0:8], $output_pin_e_list +tcu_solenoid4 = bits, U16, 1150, [0:8], $output_pin_e_list +tcu_solenoid5 = bits, U16, 1152, [0:8], $output_pin_e_list +tcu_solenoid6 = bits, U16, 1154, [0:8], $output_pin_e_list +etbFunctions1 = bits, U08, 1156, [0:2], "None", "Throttle 1", "Throttle 2", "Idle Valve", "Wastegate" +etbFunctions2 = bits, U08, 1157, [0:2], "None", "Throttle 1", "Throttle 2", "Idle Valve", "Wastegate" +drv8860spiDevice = bits, U08, 1158, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +drv8860_cs = bits, U16, 1160, [0:7], $gpio_list +drv8860_csPinMode = bits, U08, 1162, [0:1], "default", "default inverted", "open collector", "open collector inverted" +drv8860_miso = bits, U16, 1164, [0:7], $gpio_list +fuelLevelBins = array, U16, 1166, [8], "volt", 0.001, 0, 0, 5, 3 +luaOutputPins1 = bits, U16, 1182, [0:8], $output_pin_e_list +luaOutputPins2 = bits, U16, 1184, [0:8], $output_pin_e_list +luaOutputPins3 = bits, U16, 1186, [0:8], $output_pin_e_list +luaOutputPins4 = bits, U16, 1188, [0:8], $output_pin_e_list +luaOutputPins5 = bits, U16, 1190, [0:8], $output_pin_e_list +luaOutputPins6 = bits, U16, 1192, [0:8], $output_pin_e_list +luaOutputPins7 = bits, U16, 1194, [0:8], $output_pin_e_list +luaOutputPins8 = bits, U16, 1196, [0:8], $output_pin_e_list +vvtOffsets1 = scalar, F32, 1200, "value", 1, 0, -720, 1000, 1 +vvtOffsets2 = scalar, F32, 1204, "value", 1, 0, -720, 1000, 1 +vvtOffsets3 = scalar, F32, 1208, "value", 1, 0, -720, 1000, 1 +vvtOffsets4 = scalar, F32, 1212, "value", 1, 0, -720, 1000, 1 +vrThreshold1_rpmBins = array, U08, 1216, [6], "rpm", 50.0, 0, 0, 12000, 0 +vrThreshold1_values = array, U08, 1222, [6], "volts", 0.01, 0, 0, 2.5, 2 +vrThreshold1_pin = bits, U16, 1228, [0:7], $gpio_list +vrThreshold2_rpmBins = array, U08, 1232, [6], "rpm", 50.0, 0, 0, 12000, 0 +vrThreshold2_values = array, U08, 1238, [6], "volts", 0.01, 0, 0, 2.5, 2 +vrThreshold2_pin = bits, U16, 1244, [0:7], $gpio_list +gpPwmNote1 = string, ASCII, 1248, 16 +gpPwmNote2 = string, ASCII, 1264, 16 +gpPwmNote3 = string, ASCII, 1280, 16 +gpPwmNote4 = string, ASCII, 1296, 16 +tps2SecondaryMin = scalar, U16, 1312, "ADC", 1, 0, 0, 1000, 0 +tps2SecondaryMax = scalar, U16, 1314, "ADC", 1, 0, 0, 1000, 0 +widebandOnSecondBus = bits, U32, 1316, [0:0], "1", "2" +fuelClosedLoopCorrectionEnabled = bits, U32, 1316, [1:1], "false", "true" +oddFireEngine = bits, U32, 1316, [2:2], "false", "true" +boardUseTachPullUp = bits, U32, 1316, [3:3], "5v", "12v" +boardUseTempPullUp = bits, U32, 1316, [4:4], "Piggyback Mode", "With Pull Ups" +yesUnderstandLocking = bits, U32, 1316, [5:5], "no", "yes" +silentTriggerError = bits, U32, 1316, [6:6], "false", "true" +useLinearCltSensor = bits, U32, 1316, [7:7], "false", "true" +canReadEnabled = bits, U32, 1316, [8:8], "false", "true" +canWriteEnabled = bits, U32, 1316, [9:9], "false", "true" +useLinearIatSensor = bits, U32, 1316, [10:10], "false", "true" +boardUse2stepPullDown = bits, U32, 1316, [11:11], "With Pull Up", "With Pull Down" +tachPulseDurationAsDutyCycle = bits, U32, 1316, [12:12], "Constant time", "Duty cycle" +isAlternatorControlEnabled = bits, U32, 1316, [13:13], "false", "true" +invertPrimaryTriggerSignal = bits, U32, 1316, [14:14], "false", "true" +invertSecondaryTriggerSignal = bits, U32, 1316, [15:15], "false", "true" +cutFuelOnHardLimit = bits, U32, 1316, [16:16], "no", "yes" +cutSparkOnHardLimit = bits, U32, 1316, [17:17], "no", "yes" +launchFuelCutEnable = bits, U32, 1316, [18:18], "false", "true" +launchSparkCutEnable = bits, U32, 1316, [19:19], "false", "true" +boardUseCrankPullUp = bits, U32, 1316, [20:20], "VR", "Hall" +boardUseCamPullDown = bits, U32, 1316, [21:21], "With Pull Up", "With Pull Down" +boardUseCamVrPullUp = bits, U32, 1316, [22:22], "VR", "Hall" +boardUseD2PullDown = bits, U32, 1316, [23:23], "With Pull Up", "With Pull Down" +boardUseD3PullDown = bits, U32, 1316, [24:24], "With Pull Up", "With Pull Down" +boardUseD4PullDown = bits, U32, 1316, [25:25], "With Pull Up", "With Pull Down" +boardUseD5PullDown = bits, U32, 1316, [26:26], "With Pull Up", "With Pull Down" +verboseIsoTp = bits, U32, 1316, [27:27], "false", "true" +engineSnifferFocusOnInputs = bits, U32, 1316, [28:28], "false", "true" +launchActivateInverted = bits, U32, 1316, [29:29], "false", "true" +twoStroke = bits, U32, 1316, [30:30], "Four Stroke", "Two Stroke" +skippedWheelOnCam = bits, U32, 1316, [31:31], "On crankshaft", "On camshaft" +hipOutputChannel = bits, U08, 1320, [0:5], $adc_channel_e_list +acSwitch = bits, U16, 1322, [0:7], $switch_input_pin_e_list +vRefAdcChannel = bits, U08, 1324, [0:5], $adc_channel_e_list +etbNeutralPosition = scalar, U08, 1325, "%", 1, 0, 0, 100, 0 +idleMode = bits, U08, 1326, [0:0], "Open Loop + Closed Loop", "Open Loop" +isInjectionEnabled = bits, U32, 1328, [0:0], "false", "true" +isIgnitionEnabled = bits, U32, 1328, [1:1], "false", "true" +isCylinderCleanupEnabled = bits, U32, 1328, [2:2], "false", "true" +complexWallModel = bits, U32, 1328, [3:3], "Basic (constants)", "Advanced (tables)" +alwaysInstantRpm = bits, U32, 1328, [4:4], "false", "true" +isMapAveragingEnabled = bits, U32, 1328, [5:5], "false", "true" +overrideCrankingIacSetting = bits, U32, 1328, [6:6], "false", "true" +useSeparateAdvanceForIdle = bits, U32, 1328, [7:7], "false", "true" +isWaveAnalyzerEnabled = bits, U32, 1328, [8:8], "false", "true" +useSeparateVeForIdle = bits, U32, 1328, [9:9], "false", "true" +verboseTriggerSynchDetails = bits, U32, 1328, [10:10], "false", "true" +isManualSpinningMode = bits, U32, 1328, [11:11], "false", "true" +cutFuelInAcr = bits, U32, 1328, [12:12], "false", "true" +hondaK = bits, U32, 1328, [13:13], "false", "true" +twoWireBatchIgnition = bits, U32, 1328, [14:14], "false", "true" +useFixedBaroCorrFromMap = bits, U32, 1328, [15:15], "false", "true" +useSeparateAdvanceForCranking = bits, U32, 1328, [16:16], "Fixed (auto taper)", "Table" +useAdvanceCorrectionsForCranking = bits, U32, 1328, [17:17], "false", "true" +flexCranking = bits, U32, 1328, [18:18], "false", "true" +useIacPidMultTable = bits, U32, 1328, [19:19], "false", "true" +isBoostControlEnabled = bits, U32, 1328, [20:20], "false", "true" +launchSmoothRetard = bits, U32, 1328, [21:21], "false", "true" +isPhaseSyncRequiredForIgnition = bits, U32, 1328, [22:22], "false", "true" +useCltBasedRpmLimit = bits, U32, 1328, [23:23], "no", "yes" +forceO2Heating = bits, U32, 1328, [24:24], "no", "yes" +invertVvtControlIntake = bits, U32, 1328, [25:25], "advance", "retard" +invertVvtControlExhaust = bits, U32, 1328, [26:26], "advance", "retard" +useBiQuadOnAuxSpeedSensors = bits, U32, 1328, [27:27], "false", "true" +sdTriggerLog = bits, U32, 1328, [28:28], "normal", "trigger" +ALSActivateInverted = bits, U32, 1328, [29:29], "false", "true" +stepper_dc_use_two_wires = bits, U32, 1328, [30:30], "false", "true" +watchOutForLinearTime = bits, U32, 1328, [31:31], "false", "true" +engineChartSize = scalar, U32, 1332, "count", 1, 0, 0, 300, 0 +turboSpeedSensorMultiplier = scalar, F32, 1336, "mult", 1, 0, 0, 7000, 3 +camInputsDebug1 = bits, U16, 1340, [0:7], $gpio_list +camInputsDebug2 = bits, U16, 1342, [0:7], $gpio_list +camInputsDebug3 = bits, U16, 1344, [0:7], $gpio_list +camInputsDebug4 = bits, U16, 1346, [0:7], $gpio_list +acIdleRpmTarget = scalar, S16, 1348, "RPM", 1, 0, 0, 2000, 0 +warningPeriod = scalar, S16, 1350, "seconds", 1, 0, 0, 60, 0 +knockDetectionWindowStart = scalar, F32, 1352, "angle", 1, 0, -1000, 1000, 2 +knockDetectionWindowEnd = scalar, F32, 1356, "angle", 1, 0, -1000, 1000, 2 +idleStepperReactionTime = scalar, F32, 1360, "ms", 1, 0, 1, 300, 0 +idleStepperTotalSteps = scalar, S32, 1364, "count", 1, 0, 5, 3000, 0 +noAccelAfterHardLimitPeriodSecs = scalar, F32, 1368, "sec", 1, 0, 0, 60, 0 +mapAveragingSchedulingAtIndex = scalar, S32, 1372, "index", 1, 0, 0, 7000, 0 +tachPulseDuractionMs = scalar, F32, 1376, "", 1, 0, 0, 100, 2 +wwaeTau = scalar, F32, 1380, "Seconds", 1, 0, 0, 3, 2 +alternatorControl_pFactor = scalar, F32, 1384, "", 1, 0, -10000, 10000, 4 +alternatorControl_iFactor = scalar, F32, 1388, "", 1, 0, -10000, 10000, 4 +alternatorControl_dFactor = scalar, F32, 1392, "", 1, 0, -10000, 10000, 4 +alternatorControl_offset = scalar, S16, 1396, "", 1, 0, -1000, 1000, 0 +alternatorControl_periodMs = scalar, S16, 1398, "ms", 1, 0, 0, 3000, 0 +alternatorControl_minValue = scalar, S16, 1400, "", 1, 0, -30000, 30000, 0 +alternatorControl_maxValue = scalar, S16, 1402, "", 1, 0, -30000, 30000, 0 +etb_pFactor = scalar, F32, 1404, "", 1, 0, -10000, 10000, 4 +etb_iFactor = scalar, F32, 1408, "", 1, 0, -10000, 10000, 4 +etb_dFactor = scalar, F32, 1412, "", 1, 0, -10000, 10000, 4 +etb_offset = scalar, S16, 1416, "", 1, 0, -1000, 1000, 0 +etb_periodMs = scalar, S16, 1418, "ms", 1, 0, 0, 3000, 0 +etb_minValue = scalar, S16, 1420, "", 1, 0, -30000, 30000, 0 +etb_maxValue = scalar, S16, 1422, "", 1, 0, -30000, 30000, 0 +triggerInputDebugPins1 = bits, U16, 1424, [0:7], $gpio_list +triggerInputDebugPins2 = bits, U16, 1426, [0:7], $gpio_list +airTaperRpmRange = scalar, S16, 1428, "RPM", 1, 0, 0, 1500, 0 +turboSpeedSensorInputPin = bits, U16, 1430, [0:7], $brain_input_pin_e_list +tps2Min = scalar, S16, 1432, "ADC", 1, 0, 0, 1023, 0 +tps2Max = scalar, S16, 1434, "ADC", 1, 0, 0, 1023, 0 +starterControlPin = bits, U16, 1436, [0:8], $output_pin_e_list +startStopButtonMode = bits, U08, 1438, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +mc33816_flag0 = bits, U16, 1440, [0:7], $gpio_list +tachPulsePerRev = scalar, U08, 1442, "Pulse", 1, 0, 1, 255, 0 +mapErrorDetectionTooLow = scalar, F32, 1444, "kPa", 1, 0, -100, 100, 2 +mapErrorDetectionTooHigh = scalar, F32, 1448, "kPa", 1, 0, -100, 800, 2 +multisparkSparkDuration = scalar, U16, 1452, "ms", 0.001, 0, 0, 3, 2 +multisparkDwell = scalar, U16, 1454, "ms", 0.001, 0, 0, 3, 2 +idleRpmPid_pFactor = scalar, F32, 1456, "", 1, 0, -10000, 10000, 4 +idleRpmPid_iFactor = scalar, F32, 1460, "", 1, 0, -10000, 10000, 4 +idleRpmPid_dFactor = scalar, F32, 1464, "", 1, 0, -10000, 10000, 4 +idleRpmPid_offset = scalar, S16, 1468, "", 1, 0, -1000, 1000, 0 +idleRpmPid_periodMs = scalar, S16, 1470, "ms", 1, 0, 0, 3000, 0 +idleRpmPid_minValue = scalar, S16, 1472, "", 1, 0, -30000, 30000, 0 +idleRpmPid_maxValue = scalar, S16, 1474, "", 1, 0, -30000, 30000, 0 +wwaeBeta = scalar, F32, 1476, "Fraction", 1, 0, 0, 1, 2 +binarySerialTxPin = bits, U16, 1480, [0:7], $gpio_list +binarySerialRxPin = bits, U16, 1482, [0:7], $gpio_list +auxValves1 = bits, U16, 1484, [0:7], $gpio_list +auxValves2 = bits, U16, 1486, [0:7], $gpio_list +tcuUpshiftButtonPin = bits, U16, 1488, [0:7], $switch_input_pin_e_list +tcuDownshiftButtonPin = bits, U16, 1490, [0:7], $switch_input_pin_e_list +throttlePedalUpVoltage = scalar, F32, 1492, "voltage", 1, 0, -6, 6, 2 +throttlePedalWOTVoltage = scalar, F32, 1496, "voltage", 1, 0, -6, 6, 2 +startUpFuelPumpDuration = scalar, S16, 1500, "seconds", 1, 0, 0, 6000, 0 +idlePidRpmDeadZone = scalar, S16, 1502, "RPM", 1, 0, 0, 800, 0 +targetVBatt = scalar, F32, 1504, "Volts", 1, 0, 0, 30, 1 +unused1372 = scalar, U32, 1508, "", 1, 0, 0, 100, 0 +afterCrankingIACtaperDuration = scalar, S16, 1512, "cycles", 1, 0, 0, 5000, 0 +iacByTpsTaper = scalar, S16, 1514, "percent", 1, 0, 0, 500, 0 +auxSerialTxPin = bits, U16, 1516, [0:7], $gpio_list +auxSerialRxPin = bits, U16, 1518, [0:7], $gpio_list +LIS302DLCsPin = bits, U16, 1520, [0:7], $gpio_list +tpsAccelLookback = scalar, U08, 1522, "sec", 0.05, 0, 0, 5, 2 +coastingFuelCutVssLow = scalar, U08, 1523, "kph", 1, 0, 0, 255, 0 +coastingFuelCutVssHigh = scalar, U08, 1524, "kph", 1, 0, 0, 255, 0 +noFuelTrimAfterDfcoTime = scalar, U08, 1525, "sec", 0.1, 0, 0, 10, 1 +tpsAccelEnrichmentThreshold = scalar, F32, 1528, "roc", 1, 0, 0, 200, 1 +auxSpeedSensorInputPin1 = bits, U16, 1532, [0:7], $brain_input_pin_e_list +auxSpeedSensorInputPin2 = bits, U16, 1534, [0:7], $brain_input_pin_e_list +totalGearsCount = scalar, U08, 1536, "", 1, 0, 1, 10, 0 +injectionTimingMode = bits, U08, 1537, [0:1], "End of injection", "Start of injection", "Center of injection" +debugMode = bits, U08, 1538, [0:5], "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INSTANT_RPM", "INVALID", "Status", "INVALID", "INVALID", "MAP", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua" +fan1ExtraIdle = scalar, U08, 1539, "%", 1, 0, 0, 100, 0 +uartConsoleSerialSpeed = scalar, U32, 1540, "BPs", 1, 0, 0, 1000000, 0 +tpsDecelEnleanmentThreshold = scalar, F32, 1544, "roc", 1, 0, 0, 200, 1 +tpsDecelEnleanmentMultiplier = scalar, F32, 1548, "coeff", 1, 0, 0, 200, 2 +auxSerialSpeed = scalar, U32, 1552, "BPs", 1, 0, 0, 1000000, 0 +throttlePedalSecondaryUpVoltage = scalar, F32, 1556, "voltage", 1, 0, -6, 6, 2 +throttlePedalSecondaryWOTVoltage = scalar, F32, 1560, "voltage", 1, 0, -6, 6, 2 +canBaudRate = bits, U08, 1564, [0:2], "50kbps", "83.33kbps", "100kbps", "125kbps", "250kbps", "500kbps", "1Mbps" +veOverrideMode = bits, U08, 1565, [0:1], "None", "MAP", "TPS" +can2BaudRate = bits, U08, 1566, [0:2], "50kbps", "83.33kbps", "100kbps", "125kbps", "250kbps", "500kbps", "1Mbps" +afrOverrideMode = bits, U08, 1567, [0:2], "None", "MAP", "TPS", "Acc Pedal", "Cyl Filling %" +mc33_hpfp_i_peak = scalar, U08, 1568, "A", 0.1, 0, 0, 25, 1 +mc33_hpfp_i_hold = scalar, U08, 1569, "A", 0.1, 0, 0, 25, 1 +mc33_hpfp_i_hold_off = scalar, U08, 1570, "us", 1, 0, 0, 255, 0 +mc33_hpfp_max_hold = scalar, U08, 1571, "ms", 1, 0, 0, 255, 0 +stepperDcInvertedPins = bits, U32, 1572, [0:0], "false", "true" +canOpenBLT = bits, U32, 1572, [1:1], "false", "true" +can2OpenBLT = bits, U32, 1572, [2:2], "false", "true" +injectorFlowAsMassFlow = bits, U32, 1572, [3:3], "volumetric flow", "mass flow" +boardUseCanTerminator = bits, U32, 1572, [4:4], "false", "true" +kLineDoHondaSend = bits, U32, 1572, [5:5], "false", "true" +can1ListenMode = bits, U32, 1572, [6:6], "false", "true" +can2ListenMode = bits, U32, 1572, [7:7], "false", "true" +camDecoder2jzPosition = scalar, U08, 1576, "", 1, 0, 0, 100, 0 +benchTestOnTime = scalar, U16, 1578, "ms", 0.01, 0, 0, 500, 2 +lambdaProtectionRestoreTps = scalar, U08, 1580, "%", 1, 0, 0, 100, 0 +lambdaProtectionRestoreLoad = scalar, U08, 1581, "%", 10.0, 0, 0, 1000, 0 +launchActivatePinMode = bits, U08, 1582, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +can2TxPin = bits, U16, 1584, [0:7], $gpio_list +can2RxPin = bits, U16, 1586, [0:7], $gpio_list +starterControlPinMode = bits, U08, 1588, [0:1], "default", "default inverted", "open collector", "open collector inverted" +wastegatePositionSensor = bits, U08, 1589, [0:5], $adc_channel_e_list +ignOverrideMode = bits, U08, 1590, [0:2], "None", "MAP", "TPS", "Acc Pedal", "Cyl Filling %" +injectorPressureType = bits, U08, 1591, [0:0], "Low", "High" +hpfpValvePin = bits, U16, 1592, [0:8], $output_pin_e_list +hpfpValvePinMode = bits, U08, 1594, [0:1], "default", "default inverted", "open collector", "open collector inverted" +boostCutPressure = scalar, F32, 1596, "kPa (absolute)", 1, 0, 0, 1000, 0 +tchargeBins = array, U08, 1600, [16], "kg/h", 5.0, 0, 0, 1200, 0 +tchargeValues = array, U08, 1616, [16], "ratio", 0.01, 0, 0, 1, 2 +fixedTiming = scalar, F32, 1632, "deg", 1, 0, -720, 720, 2 +mapLowValueVoltage = scalar, F32, 1636, "v", 1, 0, 0, 10, 2 +mapHighValueVoltage = scalar, F32, 1640, "v", 1, 0, 0, 10, 2 +egoValueShift = scalar, F32, 1644, "value", 1, 0, -10, 10, 2 +vvtPins1 = bits, U16, 1648, [0:8], $output_pin_e_list +vvtPins2 = bits, U16, 1650, [0:8], $output_pin_e_list +vvtPins3 = bits, U16, 1652, [0:8], $output_pin_e_list +vvtPins4 = bits, U16, 1654, [0:8], $output_pin_e_list +sdCardCsPinMode = bits, U08, 1656, [0:1], "default", "default inverted", "open collector", "open collector inverted" +crankingIACposition = scalar, S32, 1660, "percent", 1, 0, -100, 100, 0 +tChargeMinRpmMinTps = scalar, F32, 1664, "", 1, 0, 0, 3, 4 +tChargeMinRpmMaxTps = scalar, F32, 1668, "", 1, 0, 0, 3, 4 +tChargeMaxRpmMinTps = scalar, F32, 1672, "", 1, 0, 0, 3, 4 +tChargeMaxRpmMaxTps = scalar, F32, 1676, "", 1, 0, 0, 3, 4 +vvtOutputFrequency = scalar, U16, 1680, "Hz", 1, 0, 0, 3000, 0 +minimumIgnitionTiming = scalar, S08, 1682, "deg BTDC", 1, 0, -90, 90, 0 +maximumIgnitionTiming = scalar, S08, 1683, "deg BTDC", 1, 0, -90, 90, 0 +alternatorPwmFrequency = scalar, S32, 1684, "Hz", 1, 0, 0, 3000, 0 +vvtMode1 = bits, U08, 1688, [0:5], "Inactive", "Single Tooth", "Toyota 3 Tooth", "Miata NB2", "Mitsu 4G69", "Bosch Quick Start", "4/1", "ST 170", "Ford Barra 3+1", "Nissan VQ", "Honda K Intake", "Nissan MR18", "Mitsu 3A92", "VTwin by MAP", "Mitsu 6G75", "Mazda Skyactiv", "Honda K Exhaust", "Mitsubishi 4G92/93/94", "Mitsubishi 4G63", "Ford Coyote", "Mitsu 6G72" +vvtMode2 = bits, U08, 1689, [0:5], "Inactive", "Single Tooth", "Toyota 3 Tooth", "Miata NB2", "Mitsu 4G69", "Bosch Quick Start", "4/1", "ST 170", "Ford Barra 3+1", "Nissan VQ", "Honda K Intake", "Nissan MR18", "Mitsu 3A92", "VTwin by MAP", "Mitsu 6G75", "Mazda Skyactiv", "Honda K Exhaust", "Mitsubishi 4G92/93/94", "Mitsubishi 4G63", "Ford Coyote", "Mitsu 6G72" +fan2ExtraIdle = scalar, U08, 1690, "%", 1, 0, 0, 100, 0 +primingDelay = scalar, U08, 1691, "sec", 0.01, 0, 0, 1, 2 +auxAnalogInputs1 = bits, U08, 1692, [0:5], $adc_channel_e_list +auxAnalogInputs2 = bits, U08, 1693, [0:5], $adc_channel_e_list +auxAnalogInputs3 = bits, U08, 1694, [0:5], $adc_channel_e_list +auxAnalogInputs4 = bits, U08, 1695, [0:5], $adc_channel_e_list +auxAnalogInputs5 = bits, U08, 1696, [0:5], $adc_channel_e_list +auxAnalogInputs6 = bits, U08, 1697, [0:5], $adc_channel_e_list +auxAnalogInputs7 = bits, U08, 1698, [0:5], $adc_channel_e_list +auxAnalogInputs8 = bits, U08, 1699, [0:5], $adc_channel_e_list +trailingCoilPins1 = bits, U16, 1700, [0:8], $output_pin_e_list +trailingCoilPins2 = bits, U16, 1702, [0:8], $output_pin_e_list +trailingCoilPins3 = bits, U16, 1704, [0:8], $output_pin_e_list +trailingCoilPins4 = bits, U16, 1706, [0:8], $output_pin_e_list +trailingCoilPins5 = bits, U16, 1708, [0:8], $output_pin_e_list +trailingCoilPins6 = bits, U16, 1710, [0:8], $output_pin_e_list +trailingCoilPins7 = bits, U16, 1712, [0:8], $output_pin_e_list +trailingCoilPins8 = bits, U16, 1714, [0:8], $output_pin_e_list +trailingCoilPins9 = bits, U16, 1716, [0:8], $output_pin_e_list +trailingCoilPins10 = bits, U16, 1718, [0:8], $output_pin_e_list +trailingCoilPins11 = bits, U16, 1720, [0:8], $output_pin_e_list +trailingCoilPins12 = bits, U16, 1722, [0:8], $output_pin_e_list +tle8888mode = bits, U08, 1724, [0:1], "Auto", "SemiAuto", "Manual", "Hall" +LIS302DLCsPinMode = bits, U08, 1725, [0:1], "default", "default inverted", "open collector", "open collector inverted" +injectorCompensationMode = bits, U08, 1726, [0:1], "None", "Fixed rail pressure", "Sensed Rail Pressure" +fan2PinMode = bits, U08, 1727, [0:1], "default", "default inverted", "open collector", "open collector inverted" +fuelReferencePressure = scalar, F32, 1728, "kPa", 1, 0, 50, 700000, 0 +postCrankingFactor = array, F32, 1732, [6x6], "mult", 1, 0, 1, 3, 2 +postCrankingDurationBins = array, F32, 1876, [6], "count", 1, 0, 0, 1000, 0 +postCrankingCLTBins = array, F32, 1900, [6], "C", 1, 0, -100, 100, 0 +auxTempSensor1_tempC_1 = scalar, F32, 1924, "*C", 1, 0, -40, 200, 1 +auxTempSensor1_tempC_2 = scalar, F32, 1928, "*C", 1, 0, -40, 200, 1 +auxTempSensor1_tempC_3 = scalar, F32, 1932, "*C", 1, 0, -40, 200, 1 +auxTempSensor1_resistance_1 = scalar, F32, 1936, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor1_resistance_2 = scalar, F32, 1940, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor1_resistance_3 = scalar, F32, 1944, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor1_bias_resistor = scalar, F32, 1948, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor1_adcChannel = bits, U08, 1952, [0:5], $adc_channel_e_list +auxTempSensor2_tempC_1 = scalar, F32, 1956, "*C", 1, 0, -40, 200, 1 +auxTempSensor2_tempC_2 = scalar, F32, 1960, "*C", 1, 0, -40, 200, 1 +auxTempSensor2_tempC_3 = scalar, F32, 1964, "*C", 1, 0, -40, 200, 1 +auxTempSensor2_resistance_1 = scalar, F32, 1968, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor2_resistance_2 = scalar, F32, 1972, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor2_resistance_3 = scalar, F32, 1976, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor2_bias_resistor = scalar, F32, 1980, "Ohm", 1, 0, 0, 200000, 1 +auxTempSensor2_adcChannel = bits, U08, 1984, [0:5], $adc_channel_e_list +knockSamplingDuration = scalar, S16, 1988, "Deg", 1, 0, 0, 720, 0 +etbFreq = scalar, S16, 1990, "Hz", 1, 0, 0, 3000, 0 +etbWastegatePid_pFactor = scalar, F32, 1992, "", 1, 0, -10000, 10000, 4 +etbWastegatePid_iFactor = scalar, F32, 1996, "", 1, 0, -10000, 10000, 4 +etbWastegatePid_dFactor = scalar, F32, 2000, "", 1, 0, -10000, 10000, 4 +etbWastegatePid_offset = scalar, S16, 2004, "", 1, 0, -1000, 1000, 0 +etbWastegatePid_periodMs = scalar, S16, 2006, "ms", 1, 0, 0, 3000, 0 +etbWastegatePid_minValue = scalar, S16, 2008, "", 1, 0, -30000, 30000, 0 +etbWastegatePid_maxValue = scalar, S16, 2010, "", 1, 0, -30000, 30000, 0 +stepperNumMicroSteps = bits, U08, 2012, [0:3], "Full-Step (Default)", "INVALID", "Half-Step", "INVALID", "1/4 Micro-Step", "INVALID", "INVALID", "INVALID", "1/8 Micro-Step" +stepperMinDutyCycle = scalar, U08, 2013, "%", 1, 0, 0, 100, 0 +stepperMaxDutyCycle = scalar, U08, 2014, "%", 1, 0, 0, 100, 0 +sdCardSpiDevice = bits, U08, 2015, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +timing_offset_cylinder1 = scalar, F32, 2016, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder2 = scalar, F32, 2020, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder3 = scalar, F32, 2024, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder4 = scalar, F32, 2028, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder5 = scalar, F32, 2032, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder6 = scalar, F32, 2036, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder7 = scalar, F32, 2040, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder8 = scalar, F32, 2044, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder9 = scalar, F32, 2048, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder10 = scalar, F32, 2052, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder11 = scalar, F32, 2056, "deg", 1, 0, -720, 720, 1 +timing_offset_cylinder12 = scalar, F32, 2060, "deg", 1, 0, -720, 720, 1 +idlePidActivationTime = scalar, F32, 2064, "seconds", 1, 0, 0, 60, 1 +spi1SckMode = bits, U08, 2068, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi1MosiMode = bits, U08, 2069, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi1MisoMode = bits, U08, 2070, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi2SckMode = bits, U08, 2071, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi2MosiMode = bits, U08, 2072, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi2MisoMode = bits, U08, 2073, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi3SckMode = bits, U08, 2074, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi3MosiMode = bits, U08, 2075, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +spi3MisoMode = bits, U08, 2076, [0:6], "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +stepperEnablePinMode = bits, U08, 2077, [0:1], "default", "default inverted", "open collector", "open collector inverted" +mc33816_rstb = bits, U16, 2078, [0:7], $gpio_list +mc33816_driven = bits, U16, 2080, [0:7], $gpio_list +brakePedalPin = bits, U16, 2082, [0:7], $switch_input_pin_e_list +brakePedalPinMode = bits, U08, 2084, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +auxPid1_pFactor = scalar, F32, 2088, "", 1, 0, -10000, 10000, 4 +auxPid1_iFactor = scalar, F32, 2092, "", 1, 0, -10000, 10000, 4 +auxPid1_dFactor = scalar, F32, 2096, "", 1, 0, -10000, 10000, 4 +auxPid1_offset = scalar, S16, 2100, "", 1, 0, -1000, 1000, 0 +auxPid1_periodMs = scalar, S16, 2102, "ms", 1, 0, 0, 3000, 0 +auxPid1_minValue = scalar, S16, 2104, "", 1, 0, -30000, 30000, 0 +auxPid1_maxValue = scalar, S16, 2106, "", 1, 0, -30000, 30000, 0 +auxPid2_pFactor = scalar, F32, 2108, "", 1, 0, -10000, 10000, 4 +auxPid2_iFactor = scalar, F32, 2112, "", 1, 0, -10000, 10000, 4 +auxPid2_dFactor = scalar, F32, 2116, "", 1, 0, -10000, 10000, 4 +auxPid2_offset = scalar, S16, 2120, "", 1, 0, -1000, 1000, 0 +auxPid2_periodMs = scalar, S16, 2122, "ms", 1, 0, 0, 3000, 0 +auxPid2_minValue = scalar, S16, 2124, "", 1, 0, -30000, 30000, 0 +auxPid2_maxValue = scalar, S16, 2126, "", 1, 0, -30000, 30000, 0 +injectorCorrectionPolynomial1 = scalar, F32, 2128, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial2 = scalar, F32, 2132, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial3 = scalar, F32, 2136, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial4 = scalar, F32, 2140, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial5 = scalar, F32, 2144, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial6 = scalar, F32, 2148, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial7 = scalar, F32, 2152, "", 1, 0, -1000, 1000, 4 +injectorCorrectionPolynomial8 = scalar, F32, 2156, "", 1, 0, -1000, 1000, 4 +primeBins = array, S08, 2160, [8], "C", 1, 0, -40, 120, 0 +oilPressure_hwChannel = bits, U08, 2168, [0:5], $adc_channel_e_list +oilPressure_v1 = scalar, F32, 2172, "volts", 1, 0, 0, 10, 2 +oilPressure_value1 = scalar, F32, 2176, "", 1, 0, 0, 1000000, 2 +oilPressure_v2 = scalar, F32, 2180, "volts", 1, 0, 0, 10, 2 +oilPressure_value2 = scalar, F32, 2184, "", 1, 0, 0, 1000000, 2 +accelerometerSpiDevice = bits, U08, 2188, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +fan2Pin = bits, U16, 2190, [0:8], $output_pin_e_list +fan2OnTemperature = scalar, U08, 2192, "deg C", 1, 0, 0, 150, 0 +fan2OffTemperature = scalar, U08, 2193, "deg C", 1, 0, 0, 150, 0 +stepperEnablePin = bits, U16, 2194, [0:7], $gpio_list +tle8888_cs = bits, U16, 2196, [0:7], $gpio_list +tle8888_csPinMode = bits, U08, 2198, [0:1], "default", "default inverted", "open collector", "open collector inverted" +mc33816_cs = bits, U16, 2200, [0:7], $gpio_list +auxFrequencyFilter = scalar, F32, 2204, "hz", 1, 0, 0, 100, 1 +vvtControlMinRpm = scalar, S16, 2208, "RPM", 1, 0, 0, 3000, 0 +sentInputPins1 = bits, U16, 2210, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +launchFuelAdderPercent = scalar, S08, 2212, "%", 1, 0, 0, 100, 0 +etbJamTimeout = scalar, U08, 2213, "sec", 0.02, 0, 0, 5, 2 +etbExpAverageLength = scalar, U16, 2214, "", 1, 0, 0, 32000, 0 +etbDutyThreshold = scalar, F32, 2216, "", 1, 0, 0, 100, 0 +coastingFuelCutRpmHigh = scalar, S16, 2220, "rpm", 1, 0, 0, 5000, 0 +coastingFuelCutRpmLow = scalar, S16, 2222, "rpm", 1, 0, 0, 5000, 0 +coastingFuelCutTps = scalar, S16, 2224, "%", 1, 0, 0, 20, 0 +coastingFuelCutClt = scalar, S16, 2226, "C", 1, 0, -100, 100, 0 +pidExtraForLowRpm = scalar, S16, 2228, "%", 1, 0, 0, 100, 0 +coastingFuelCutMap = scalar, S16, 2230, "kPa", 1, 0, 0, 250, 0 +highPressureFuel_hwChannel = bits, U08, 2232, [0:5], $adc_channel_e_list +highPressureFuel_v1 = scalar, F32, 2236, "volts", 1, 0, 0, 10, 2 +highPressureFuel_value1 = scalar, F32, 2240, "", 1, 0, 0, 1000000, 2 +highPressureFuel_v2 = scalar, F32, 2244, "volts", 1, 0, 0, 10, 2 +highPressureFuel_value2 = scalar, F32, 2248, "", 1, 0, 0, 1000000, 2 +lowPressureFuel_hwChannel = bits, U08, 2252, [0:5], $adc_channel_e_list +lowPressureFuel_v1 = scalar, F32, 2256, "volts", 1, 0, 0, 10, 2 +lowPressureFuel_value1 = scalar, F32, 2260, "", 1, 0, 0, 1000000, 2 +lowPressureFuel_v2 = scalar, F32, 2264, "volts", 1, 0, 0, 10, 2 +lowPressureFuel_value2 = scalar, F32, 2268, "", 1, 0, 0, 1000000, 2 +cltRevLimitRpmBins = array, S08, 2272, [4], "C", 1, 0, -40, 120, 0 +cltRevLimitRpm = array, U16, 2276, [4], "RPM", 1, 0, 0, 20000, 0 +scriptCurveName1 = string, ASCII, 2284, 16 +scriptCurveName2 = string, ASCII, 2300, 16 +scriptCurveName3 = string, ASCII, 2316, 16 +scriptCurveName4 = string, ASCII, 2332, 16 +scriptCurveName5 = string, ASCII, 2348, 16 +scriptCurveName6 = string, ASCII, 2364, 16 +scriptTableName1 = string, ASCII, 2380, 16 +scriptTableName2 = string, ASCII, 2396, 16 +scriptTableName3 = string, ASCII, 2412, 16 +scriptTableName4 = string, ASCII, 2428, 16 +scriptSettingName1 = string, ASCII, 2444, 16 +scriptSettingName2 = string, ASCII, 2460, 16 +scriptSettingName3 = string, ASCII, 2476, 16 +scriptSettingName4 = string, ASCII, 2492, 16 +scriptSettingName5 = string, ASCII, 2508, 16 +scriptSettingName6 = string, ASCII, 2524, 16 +scriptSettingName7 = string, ASCII, 2540, 16 +scriptSettingName8 = string, ASCII, 2556, 16 +tChargeAirCoefMin = scalar, F32, 2572, "", 1, 0, 0, 1, 3 +tChargeAirCoefMax = scalar, F32, 2576, "", 1, 0, 0, 1, 3 +tChargeAirFlowMax = scalar, F32, 2580, "kg/h", 1, 0, 0, 1000, 1 +tChargeAirIncrLimit = scalar, F32, 2584, "deg/sec", 1, 0, 0, 100, 1 +tChargeAirDecrLimit = scalar, F32, 2588, "deg/sec", 1, 0, 0, 100, 1 +tChargeMode = bits, U08, 2592, [0:1], "RPM+TPS (Default)", "Air Mass Interpolation", "Table" +hip9011Gain = scalar, F32, 2596, "", 1, 0, 0, 100, 2 +etb_iTermMin = scalar, S16, 2600, "", 1, 0, -30000, 30000, 0 +etb_iTermMax = scalar, S16, 2602, "", 1, 0, -30000, 30000, 0 +idleTimingPid_pFactor = scalar, F32, 2604, "", 1, 0, -10000, 10000, 4 +idleTimingPid_iFactor = scalar, F32, 2608, "", 1, 0, -10000, 10000, 4 +idleTimingPid_dFactor = scalar, F32, 2612, "", 1, 0, -10000, 10000, 4 +idleTimingPid_offset = scalar, S16, 2616, "", 1, 0, -1000, 1000, 0 +idleTimingPid_periodMs = scalar, S16, 2618, "ms", 1, 0, 0, 3000, 0 +idleTimingPid_minValue = scalar, S16, 2620, "", 1, 0, -30000, 30000, 0 +idleTimingPid_maxValue = scalar, S16, 2622, "", 1, 0, -30000, 30000, 0 +idleTimingSoftEntryTime = scalar, F32, 2624, "", 1, 0, 0, 100, 1 +etbRocExpAverageLength = scalar, S16, 2628, "", 1, 0, 0, 32000, 0 +tpsAccelFractionPeriod = scalar, S16, 2630, "cycles", 1, 0, 0, 500, 0 +tpsAccelFractionDivisor = scalar, F32, 2632, "coef", 1, 0, 0, 100, 2 +tle8888spiDevice = bits, U08, 2636, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +mc33816spiDevice = bits, U08, 2637, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +idlerpmpid_iTermMin = scalar, S16, 2638, "", 1, 0, -30000, 30000, 0 +tle6240spiDevice = bits, U08, 2640, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" +stoichRatioPrimary = scalar, U08, 2641, ":1", 0.1, 0, 5, 25, 1 +idlerpmpid_iTermMax = scalar, S16, 2642, "", 1, 0, -30000, 30000, 0 +etbIdleThrottleRange = scalar, F32, 2644, "%", 1, 0, 0, 15, 0 +cylinderBankSelect1 = scalar, U08, 2648, "", 1, 1, 1, 2, 0 +cylinderBankSelect2 = scalar, U08, 2649, "", 1, 1, 1, 2, 0 +cylinderBankSelect3 = scalar, U08, 2650, "", 1, 1, 1, 2, 0 +cylinderBankSelect4 = scalar, U08, 2651, "", 1, 1, 1, 2, 0 +cylinderBankSelect5 = scalar, U08, 2652, "", 1, 1, 1, 2, 0 +cylinderBankSelect6 = scalar, U08, 2653, "", 1, 1, 1, 2, 0 +cylinderBankSelect7 = scalar, U08, 2654, "", 1, 1, 1, 2, 0 +cylinderBankSelect8 = scalar, U08, 2655, "", 1, 1, 1, 2, 0 +cylinderBankSelect9 = scalar, U08, 2656, "", 1, 1, 1, 2, 0 +cylinderBankSelect10 = scalar, U08, 2657, "", 1, 1, 1, 2, 0 +cylinderBankSelect11 = scalar, U08, 2658, "", 1, 1, 1, 2, 0 +cylinderBankSelect12 = scalar, U08, 2659, "", 1, 1, 1, 2, 0 +primeValues = array, U08, 2660, [8], "mg", 5.0, 0, 0, 1250, 0 +triggerCompCenterVolt = scalar, U08, 2668, "V", 0.02, 0, 0, 5.1, 2 +triggerCompHystMin = scalar, U08, 2669, "V", 0.02, 0, 0, 5.1, 2 +triggerCompHystMax = scalar, U08, 2670, "V", 0.02, 0, 0, 5.1, 2 +triggerCompSensorSatRpm = scalar, U08, 2671, "RPM", 50.0, 0, 0, 12000, 0 +idleRpmPid2_pFactor = scalar, F32, 2672, "", 1, 0, -10000, 10000, 4 +idleRpmPid2_iFactor = scalar, F32, 2676, "", 1, 0, -10000, 10000, 4 +idleRpmPid2_dFactor = scalar, F32, 2680, "", 1, 0, -10000, 10000, 4 +idleRpmPid2_offset = scalar, S16, 2684, "", 1, 0, -1000, 1000, 0 +idleRpmPid2_periodMs = scalar, S16, 2686, "ms", 1, 0, 0, 3000, 0 +idleRpmPid2_minValue = scalar, S16, 2688, "", 1, 0, -30000, 30000, 0 +idleRpmPid2_maxValue = scalar, S16, 2690, "", 1, 0, -30000, 30000, 0 +canVssNbcType = bits, U08, 2692, [0:1], "BMW_e46", "W202", "Lua", "BMW E8x/E9x MK60e5" +gppwm1_pin = bits, U16, 2696, [0:8], $output_pin_e_list +gppwm1_dutyIfError = scalar, U08, 2698, "%", 1, 0, 0, 100, 0 +gppwm1_pwmFrequency = scalar, U16, 2700, "hz", 1, 0, 0, 500, 0 +gppwm1_onAboveDuty = scalar, U08, 2702, "%", 1, 0, 0, 100, 0 +gppwm1_offBelowDuty = scalar, U08, 2703, "%", 1, 0, 0, 100, 0 +gppwm1_loadAxis = bits, U08, 2704, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm1_rpmAxis = bits, U08, 2705, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm1_loadBins = array, S16, 2706, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm1_rpmBins = array, S16, 2722, [8], "RPM", 1, 0, -30000, 30000, 0 +gppwm1_table = array, U08, 2738, [8x8], "duty", 0.5, 0, 0, 100, 1 +gppwm2_pin = bits, U16, 2804, [0:8], $output_pin_e_list +gppwm2_dutyIfError = scalar, U08, 2806, "%", 1, 0, 0, 100, 0 +gppwm2_pwmFrequency = scalar, U16, 2808, "hz", 1, 0, 0, 500, 0 +gppwm2_onAboveDuty = scalar, U08, 2810, "%", 1, 0, 0, 100, 0 +gppwm2_offBelowDuty = scalar, U08, 2811, "%", 1, 0, 0, 100, 0 +gppwm2_loadAxis = bits, U08, 2812, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm2_rpmAxis = bits, U08, 2813, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm2_loadBins = array, S16, 2814, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm2_rpmBins = array, S16, 2830, [8], "RPM", 1, 0, -30000, 30000, 0 +gppwm2_table = array, U08, 2846, [8x8], "duty", 0.5, 0, 0, 100, 1 +gppwm3_pin = bits, U16, 2912, [0:8], $output_pin_e_list +gppwm3_dutyIfError = scalar, U08, 2914, "%", 1, 0, 0, 100, 0 +gppwm3_pwmFrequency = scalar, U16, 2916, "hz", 1, 0, 0, 500, 0 +gppwm3_onAboveDuty = scalar, U08, 2918, "%", 1, 0, 0, 100, 0 +gppwm3_offBelowDuty = scalar, U08, 2919, "%", 1, 0, 0, 100, 0 +gppwm3_loadAxis = bits, U08, 2920, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm3_rpmAxis = bits, U08, 2921, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm3_loadBins = array, S16, 2922, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm3_rpmBins = array, S16, 2938, [8], "RPM", 1, 0, -30000, 30000, 0 +gppwm3_table = array, U08, 2954, [8x8], "duty", 0.5, 0, 0, 100, 1 +gppwm4_pin = bits, U16, 3020, [0:8], $output_pin_e_list +gppwm4_dutyIfError = scalar, U08, 3022, "%", 1, 0, 0, 100, 0 +gppwm4_pwmFrequency = scalar, U16, 3024, "hz", 1, 0, 0, 500, 0 +gppwm4_onAboveDuty = scalar, U08, 3026, "%", 1, 0, 0, 100, 0 +gppwm4_offBelowDuty = scalar, U08, 3027, "%", 1, 0, 0, 100, 0 +gppwm4_loadAxis = bits, U08, 3028, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm4_rpmAxis = bits, U08, 3029, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +gppwm4_loadBins = array, S16, 3030, [8], "load", 0.1, 0, -1000, 1000, 1 +gppwm4_rpmBins = array, S16, 3046, [8], "RPM", 1, 0, -30000, 30000, 0 +gppwm4_table = array, U08, 3062, [8x8], "duty", 0.5, 0, 0, 100, 1 +mc33_i_boost = scalar, U16, 3128, "mA", 1, 0, 1000, 25000, 0 +mc33_i_peak = scalar, U16, 3130, "mA", 1, 0, 1000, 20000, 0 +mc33_i_hold = scalar, U16, 3132, "mA", 1, 0, 1000, 20000, 0 +mc33_t_max_boost = scalar, U16, 3134, "us", 1, 0, 0, 10000, 0 +mc33_t_peak_off = scalar, U16, 3136, "us", 1, 0, 0, 10000, 0 +mc33_t_peak_tot = scalar, U16, 3138, "us", 1, 0, 0, 10000, 0 +mc33_t_bypass = scalar, U16, 3140, "us", 1, 0, 0, 10000, 0 +mc33_t_hold_off = scalar, U16, 3142, "us", 1, 0, 0, 10000, 0 +mc33_t_hold_tot = scalar, U16, 3144, "us", 1, 0, 0, 10000, 0 +tcuUpshiftButtonPinMode = bits, U08, 3146, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcuDownshiftButtonPinMode = bits, U08, 3147, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +acSwitchMode = bits, U08, 3148, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcu_solenoid_mode1 = bits, U08, 3149, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_solenoid_mode2 = bits, U08, 3150, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_solenoid_mode3 = bits, U08, 3151, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_solenoid_mode4 = bits, U08, 3152, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_solenoid_mode5 = bits, U08, 3153, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_solenoid_mode6 = bits, U08, 3154, [0:1], "default", "default inverted", "open collector", "open collector inverted" +knockBaseNoise = array, S08, 3155, [16], "dB", 0.5, 0, -50, 10, 1 +triggerGapOverrideFrom1 = scalar, F32, 3172, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom2 = scalar, F32, 3176, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom3 = scalar, F32, 3180, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom4 = scalar, F32, 3184, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom5 = scalar, F32, 3188, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom6 = scalar, F32, 3192, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom7 = scalar, F32, 3196, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom8 = scalar, F32, 3200, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom9 = scalar, F32, 3204, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom10 = scalar, F32, 3208, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom11 = scalar, F32, 3212, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom12 = scalar, F32, 3216, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom13 = scalar, F32, 3220, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom14 = scalar, F32, 3224, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom15 = scalar, F32, 3228, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom16 = scalar, F32, 3232, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom17 = scalar, F32, 3236, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideFrom18 = scalar, F32, 3240, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo1 = scalar, F32, 3244, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo2 = scalar, F32, 3248, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo3 = scalar, F32, 3252, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo4 = scalar, F32, 3256, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo5 = scalar, F32, 3260, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo6 = scalar, F32, 3264, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo7 = scalar, F32, 3268, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo8 = scalar, F32, 3272, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo9 = scalar, F32, 3276, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo10 = scalar, F32, 3280, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo11 = scalar, F32, 3284, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo12 = scalar, F32, 3288, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo13 = scalar, F32, 3292, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo14 = scalar, F32, 3296, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo15 = scalar, F32, 3300, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo16 = scalar, F32, 3304, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo17 = scalar, F32, 3308, "ratio", 1, 0, 0, 20, 3 +triggerGapOverrideTo18 = scalar, F32, 3312, "ratio", 1, 0, 0, 20, 3 +maxCamPhaseResolveRpm = scalar, U08, 3316, "rpm", 50.0, 0, 0, 12500, 0 +dfcoDelay = scalar, U08, 3317, "sec", 0.1, 0, 0, 10, 1 +acDelay = scalar, U08, 3318, "sec", 0.1, 0, 0, 10, 1 +fordInjectorSmallPulseBreakPoint = scalar, U16, 3320, "mg", 0.001, 0, 0, 65, 3 +tpsTspCorrValues = array, U08, 3322, [4], "multiplier", 0.02, 0, 0, 5, 2 +etbJamIntegratorLimit = scalar, U08, 3326, "%", 1, 0, 0, 50, 0 +hpfpCamLobes = scalar, U08, 3327, "lobes/cam", 1, 0, 0, 255, 0 +hpfpCam = bits, U08, 3328, [0:2], "NONE", "Intake 1", "Exhaust 1", "Intake 2", "Exhaust 2" +auxiliarySetting1 = scalar, U08, 3329, "", 1, 0, 0, 100, 0 +hpfpMinAngle = scalar, U08, 3330, "deg", 1, 0, 0, 255, 0 +hpfpPumpVolume = scalar, U16, 3332, "cc", 0.001, 0, 0, 65, 3 +hpfpActivationAngle = scalar, U08, 3334, "deg", 1, 0, 0, 255, 0 +issFilterReciprocal = scalar, U08, 3335, "", 1, 0, 0, 255, 0 +hpfpPidP = scalar, U16, 3336, "%/kPa", 0.001, 0, 0, 65, 3 +hpfpPidI = scalar, U16, 3338, "%/kPa/lobe", 1.0E-5, 0, 0, 0.65, 5 +hpfpTargetDecay = scalar, U16, 3340, "kPa/s", 1, 0, 0, 65000, 0 +hpfpLobeProfileQuantityBins = array, U08, 3342, [16], "%", 0.5, 0, 0, 100, 1 +hpfpLobeProfileAngle = array, U08, 3358, [16], "deg", 0.5, 0, 0, 125, 1 +hpfpDeadtimeVoltsBins = array, U08, 3374, [8], "volts", 1, 0, 0, 255, 0 +hpfpDeadtimeMS = array, U16, 3382, [8], "ms", 0.001, 0, 0, 65, 3 +hpfpTarget = array, U16, 3398, [10x10], "kPa", 1, 0, 0, 65000, 0 +hpfpTargetLoadBins = array, U16, 3598, [10], "load", 0.1, 0, 0, 6500, 1 +hpfpTargetRpmBins = array, U08, 3618, [10], "RPM", 50.0, 0, 0, 12500, 0 +hpfpCompensation = array, S08, 3628, [10x10], "%", 1, 0, -100, 100, 0 +hpfpCompensationLoadBins = array, U16, 3728, [10], "cc/lobe", 0.001, 0, 0, 65, 3 +hpfpCompensationRpmBins = array, U08, 3748, [10], "RPM", 50.0, 0, 0, 12500, 0 +stepper_raw_output1 = bits, U16, 3758, [0:8], $output_pin_e_list +stepper_raw_output2 = bits, U16, 3760, [0:8], $output_pin_e_list +stepper_raw_output3 = bits, U16, 3762, [0:8], $output_pin_e_list +stepper_raw_output4 = bits, U16, 3764, [0:8], $output_pin_e_list +gearRatio1 = scalar, U16, 3766, "ratio", 0.01, 0, 0, 30, 2 +gearRatio2 = scalar, U16, 3768, "ratio", 0.01, 0, 0, 30, 2 +gearRatio3 = scalar, U16, 3770, "ratio", 0.01, 0, 0, 30, 2 +gearRatio4 = scalar, U16, 3772, "ratio", 0.01, 0, 0, 30, 2 +gearRatio5 = scalar, U16, 3774, "ratio", 0.01, 0, 0, 30, 2 +gearRatio6 = scalar, U16, 3776, "ratio", 0.01, 0, 0, 30, 2 +gearRatio7 = scalar, U16, 3778, "ratio", 0.01, 0, 0, 30, 2 +gearRatio8 = scalar, U16, 3780, "ratio", 0.01, 0, 0, 30, 2 +gearRatio9 = scalar, U16, 3782, "ratio", 0.01, 0, 0, 30, 2 +gearRatio10 = scalar, U16, 3784, "ratio", 0.01, 0, 0, 30, 2 +vvtActivationDelayMs = scalar, U16, 3786, "ms", 1, 0, 0, 65000, 0 +wwCltBins = array, S08, 3788, [8], "deg C", 1, 0, -40, 120, 0 +wwTauCltValues = array, U08, 3796, [8], "", 0.01, 0, 0, 2.5, 2 +wwBetaCltValues = array, U08, 3804, [8], "", 0.01, 0, 0, 1, 2 +wwMapBins = array, S08, 3812, [8], "kPa", 1, 0, 0, 250, 0 +wwTauMapValues = array, U08, 3820, [8], "", 0.01, 0, 0, 2.5, 2 +wwBetaMapValues = array, U08, 3828, [8], "", 0.01, 0, 0, 2.5, 2 +torqueTable = array, U08, 3836, [6x6], "Nm", 10.0, 0, 0, 255, 0 +torqueRpmBins = array, U16, 3872, [6], "RPM", 1, 0, 0, 65000, 0 +torqueLoadBins = array, U16, 3884, [6], "Load", 1, 0, 0, 65000, 0 +gearControllerMode = bits, U08, 3896, [0:1], "None", "Button Shift" +transmissionControllerMode = bits, U08, 3897, [0:1], "None", "Simple Transmission", "GM 4L6X" +acrDisablePhase = scalar, U16, 3898, "deg", 1, 0, 0, 720, 0 +auxLinear1_hwChannel = bits, U08, 3900, [0:5], $adc_channel_e_list +auxLinear1_v1 = scalar, F32, 3904, "volts", 1, 0, 0, 10, 2 +auxLinear1_value1 = scalar, F32, 3908, "", 1, 0, 0, 1000000, 2 +auxLinear1_v2 = scalar, F32, 3912, "volts", 1, 0, 0, 10, 2 +auxLinear1_value2 = scalar, F32, 3916, "", 1, 0, 0, 1000000, 2 +auxLinear2_hwChannel = bits, U08, 3920, [0:5], $adc_channel_e_list +auxLinear2_v1 = scalar, F32, 3924, "volts", 1, 0, 0, 10, 2 +auxLinear2_value1 = scalar, F32, 3928, "", 1, 0, 0, 1000000, 2 +auxLinear2_v2 = scalar, F32, 3932, "volts", 1, 0, 0, 10, 2 +auxLinear2_value2 = scalar, F32, 3936, "", 1, 0, 0, 1000000, 2 +tcu_tcc_onoff_solenoid = bits, U16, 3940, [0:8], $output_pin_e_list +tcu_tcc_onoff_solenoid_mode = bits, U08, 3942, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_tcc_pwm_solenoid = bits, U16, 3944, [0:8], $output_pin_e_list +tcu_tcc_pwm_solenoid_mode = bits, U08, 3946, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_tcc_pwm_solenoid_freq = scalar, U16, 3948, "Hz", 1, 0, 0, 3000, 0 +tcu_pc_solenoid_pin = bits, U16, 3950, [0:8], $output_pin_e_list +tcu_pc_solenoid_pin_mode = bits, U08, 3952, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_pc_solenoid_freq = scalar, U16, 3954, "Hz", 1, 0, 0, 3000, 0 +tcu_32_solenoid_pin = bits, U16, 3956, [0:8], $output_pin_e_list +tcu_32_solenoid_pin_mode = bits, U08, 3958, [0:1], "default", "default inverted", "open collector", "open collector inverted" +tcu_32_solenoid_freq = scalar, U16, 3960, "Hz", 1, 0, 0, 3000, 0 +acrPin2 = bits, U16, 3962, [0:8], $output_pin_e_list +etbMinimumPosition = scalar, F32, 3964, "%", 1, 0, 0.01, 100, 2 +tuneHidingKey = scalar, U16, 3968, "", 1, 0, 0, 20000, 0 +vinNumber = string, ASCII, 3970, 17 +highSpeedOffsets = array, U16, 3988, [32], "", 1, 0.00000,0.00,65535, 0, noMsqSave +etbDutyShutdownThreshold = scalar, F32, 4052, "", 1, 0, 0, 100, 0 +fuelPressureSensorMode = bits, U08, 4056, [0:1], "Absolute", "Gauge", "Differential", "INVALID" +luaDigitalInputPins1 = bits, U16, 4058, [0:7], $switch_input_pin_e_list +luaDigitalInputPins2 = bits, U16, 4060, [0:7], $switch_input_pin_e_list +luaDigitalInputPins3 = bits, U16, 4062, [0:7], $switch_input_pin_e_list +luaDigitalInputPins4 = bits, U16, 4064, [0:7], $switch_input_pin_e_list +luaDigitalInputPins5 = bits, U16, 4066, [0:7], $switch_input_pin_e_list +luaDigitalInputPins6 = bits, U16, 4068, [0:7], $switch_input_pin_e_list +luaDigitalInputPins7 = bits, U16, 4070, [0:7], $switch_input_pin_e_list +luaDigitalInputPins8 = bits, U16, 4072, [0:7], $switch_input_pin_e_list +tpsTspCorrValuesBins = array, U08, 4074, [4], "RPM", 50.0, 0, 0, 17500, 0 +ALSMinRPM = scalar, S16, 4078, "rpm", 1, 0, 0, 20000, 0 +ALSMaxRPM = scalar, S16, 4080, "rpm", 1, 0, 0, 20000, 0 +ALSMaxDuration = scalar, S16, 4082, "sec", 1, 0, 0, 10, 0 +ALSMinCLT = scalar, S08, 4084, "C", 1, 0, 0, 90, 0 +ALSMaxCLT = scalar, S08, 4085, "C", 1, 0, 0, 105, 0 +alsMinTimeBetween = scalar, U08, 4086, "", 1, 0, 0, 20000, 0 +alsEtbPosition = scalar, U08, 4087, "", 1, 0, 0, 20000, 0 +acRelayAlternatorDutyAdder = scalar, U08, 4088, "%", 1, 0, 0, 100, 0 +sentEtbType = bits, S08, 4089, [0:1], "None", "GM type 1", "Ford type 1", "Custom" +customSentTpsMin = scalar, U16, 4090, "", 1, 0, 0, 32000, 0 +ALSIdleAdd = scalar, S32, 4092, "%", 1, 0, 0, 100, 2 +ALSEtbAdd = scalar, S32, 4096, "%", 1, 0, 0, 100, 2 +ALSSkipRatio = scalar, F32, 4100, "", 1, 0, 0, 1, 1 +ALSMaxDriverThrottleIntent = scalar, U08, 4104, "%", 1, 0, 0, 10, 0 +ALSActivatePinMode = bits, U08, 4105, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tpsSecondaryMaximum = scalar, U08, 4106, "%", 0.5, 0, 0, 100, 1 +ppsSecondaryMaximum = scalar, U08, 4107, "%", 0.5, 0, 0, 100, 1 +luaDigitalInputPinModes1 = bits, U08, 4108, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes2 = bits, U08, 4109, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes3 = bits, U08, 4110, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes4 = bits, U08, 4111, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes5 = bits, U08, 4112, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes6 = bits, U08, 4113, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes7 = bits, U08, 4114, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +luaDigitalInputPinModes8 = bits, U08, 4115, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +customSentTpsMax = scalar, U16, 4116, "", 1, 0, 0, 32000, 0 +kLineBaudRate = scalar, U16, 4118, "", 1, 0, 0, 32000, 0 +canGpioType = bits, S08, 4120, [0:1], "None", "DRT protocol", "MS protocol" +uiMode = bits, S08, 4121, [0:1], "Full", "Installation", "Tuning" +hpfpPeakPos = scalar, S16, 4122, "deg", 1, 0, -719, 719, 0 +kLinePeriodUs = scalar, S16, 4124, "us", 1, 0, 0, 30000, 0 +rpmSoftLimitWindowSize = scalar, U08, 4126, "RPM", 10.0, 0, 0, 2500, 0 +rpmSoftLimitTimingRetard = scalar, U08, 4127, "deg", 0.2, 0, 0, 50, 1 +rpmSoftLimitFuelAdded = scalar, U08, 4128, "%", 0.2, 0, 0, 50, 1 +rpmHardLimitHyst = scalar, U08, 4129, "RPM", 10.0, 0, 0, 2500, 0 +benchTestOffTime = scalar, U16, 4130, "ms", 0.1, 0, 0, 2000, 1 +boostCutPressureHyst = scalar, U08, 4132, "kPa (absolute)", 0.5, 0, 0, 125, 1 +gearBasedOpenLoopBoostAdder = array, U08, 4133, [10], "%", 0.5, 0, 0, 100, 1 +benchTestCount = scalar, U32, 4144, "", 1, 0, 0, 10000000, 0 +iacByTpsHoldTime = scalar, U08, 4148, "seconds", 0.1, 0, 0, 25, 1 +iacByTpsDecayTime = scalar, U08, 4149, "seconds", 0.1, 0, 0, 25, 1 +tcu_rangeInput1 = bits, U16, 4150, [0:7], $switch_input_pin_e_list +tcu_rangeInput2 = bits, U16, 4152, [0:7], $switch_input_pin_e_list +tcu_rangeInput3 = bits, U16, 4154, [0:7], $switch_input_pin_e_list +tcu_rangeInput4 = bits, U16, 4156, [0:7], $switch_input_pin_e_list +tcu_rangeInput5 = bits, U16, 4158, [0:7], $switch_input_pin_e_list +tcu_rangeInput6 = bits, U16, 4160, [0:7], $switch_input_pin_e_list +tcu_rangeInputMode1 = bits, U08, 4162, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcu_rangeInputMode2 = bits, U08, 4163, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcu_rangeInputMode3 = bits, U08, 4164, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcu_rangeInputMode4 = bits, U08, 4165, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcu_rangeInputMode5 = bits, U08, 4166, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +tcu_rangeInputMode6 = bits, U08, 4167, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" +canVssScaling = scalar, U16, 4168, "ratio", 1.0E-4, 0, 0.5, 1.5, 4 +oilTempSensor_tempC_1 = scalar, F32, 4172, "*C", 1, 0, -40, 200, 1 +oilTempSensor_tempC_2 = scalar, F32, 4176, "*C", 1, 0, -40, 200, 1 +oilTempSensor_tempC_3 = scalar, F32, 4180, "*C", 1, 0, -40, 200, 1 +oilTempSensor_resistance_1 = scalar, F32, 4184, "Ohm", 1, 0, 0, 200000, 1 +oilTempSensor_resistance_2 = scalar, F32, 4188, "Ohm", 1, 0, 0, 200000, 1 +oilTempSensor_resistance_3 = scalar, F32, 4192, "Ohm", 1, 0, 0, 200000, 1 +oilTempSensor_bias_resistor = scalar, F32, 4196, "Ohm", 1, 0, 0, 200000, 1 +oilTempSensor_adcChannel = bits, U08, 4200, [0:5], $adc_channel_e_list +fuelTempSensor_tempC_1 = scalar, F32, 4204, "*C", 1, 0, -40, 200, 1 +fuelTempSensor_tempC_2 = scalar, F32, 4208, "*C", 1, 0, -40, 200, 1 +fuelTempSensor_tempC_3 = scalar, F32, 4212, "*C", 1, 0, -40, 200, 1 +fuelTempSensor_resistance_1 = scalar, F32, 4216, "Ohm", 1, 0, 0, 200000, 1 +fuelTempSensor_resistance_2 = scalar, F32, 4220, "Ohm", 1, 0, 0, 200000, 1 +fuelTempSensor_resistance_3 = scalar, F32, 4224, "Ohm", 1, 0, 0, 200000, 1 +fuelTempSensor_bias_resistor = scalar, F32, 4228, "Ohm", 1, 0, 0, 200000, 1 +fuelTempSensor_adcChannel = bits, U08, 4232, [0:5], $adc_channel_e_list +ambientTempSensor_tempC_1 = scalar, F32, 4236, "*C", 1, 0, -40, 200, 1 +ambientTempSensor_tempC_2 = scalar, F32, 4240, "*C", 1, 0, -40, 200, 1 +ambientTempSensor_tempC_3 = scalar, F32, 4244, "*C", 1, 0, -40, 200, 1 +ambientTempSensor_resistance_1 = scalar, F32, 4248, "Ohm", 1, 0, 0, 200000, 1 +ambientTempSensor_resistance_2 = scalar, F32, 4252, "Ohm", 1, 0, 0, 200000, 1 +ambientTempSensor_resistance_3 = scalar, F32, 4256, "Ohm", 1, 0, 0, 200000, 1 +ambientTempSensor_bias_resistor = scalar, F32, 4260, "Ohm", 1, 0, 0, 200000, 1 +ambientTempSensor_adcChannel = bits, U08, 4264, [0:5], $adc_channel_e_list +compressorDischargeTemperature_tempC_1 = scalar, F32, 4268, "*C", 1, 0, -40, 200, 1 +compressorDischargeTemperature_tempC_2 = scalar, F32, 4272, "*C", 1, 0, -40, 200, 1 +compressorDischargeTemperature_tempC_3 = scalar, F32, 4276, "*C", 1, 0, -40, 200, 1 +compressorDischargeTemperature_resistance_1 = scalar, F32, 4280, "Ohm", 1, 0, 0, 200000, 1 +compressorDischargeTemperature_resistance_2 = scalar, F32, 4284, "Ohm", 1, 0, 0, 200000, 1 +compressorDischargeTemperature_resistance_3 = scalar, F32, 4288, "Ohm", 1, 0, 0, 200000, 1 +compressorDischargeTemperature_bias_resistor = scalar, F32, 4292, "Ohm", 1, 0, 0, 200000, 1 +compressorDischargeTemperature_adcChannel = bits, U08, 4296, [0:5], $adc_channel_e_list +throttleInletPressureChannel = bits, U08, 4300, [0:5], $adc_channel_e_list +compressorDischargePressureChannel = bits, U08, 4301, [0:5], $adc_channel_e_list +dacOutputPins1 = bits, U16, 4302, [0:7], $gpio_list +dacOutputPins2 = bits, U16, 4304, [0:7], $gpio_list +speedometerOutputPin = bits, U16, 4306, [0:8], $output_pin_e_list +speedometerPulsePerKm = scalar, U16, 4308, "", 1, 0, 0, 65000, 0 +simulatorCamPosition1 = scalar, U08, 4310, "", 1, 0, 0, 100, 0 +simulatorCamPosition2 = scalar, U08, 4311, "", 1, 0, 0, 100, 0 +simulatorCamPosition3 = scalar, U08, 4312, "", 1, 0, 0, 100, 0 +simulatorCamPosition4 = scalar, U08, 4313, "", 1, 0, 0, 100, 0 +unusedExplicitFilling2 = scalar, U16, 4314, "", 1, 0, 0, 32000, 0 +triggerVVTGapOverrideFrom1 = scalar, F32, 4316, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideFrom2 = scalar, F32, 4320, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideFrom3 = scalar, F32, 4324, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideFrom4 = scalar, F32, 4328, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideTo1 = scalar, F32, 4332, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideTo2 = scalar, F32, 4336, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideTo3 = scalar, F32, 4340, "ratio", 1, 0, 0, 20, 3 +triggerVVTGapOverrideTo4 = scalar, F32, 4344, "ratio", 1, 0, 0, 20, 3 +mainUnusedEnd = array, U08, 4348, [208], "units", 1, 0, 0, 1, 0 +etbBiasBins = array, F32, 4556, [8], "target TPS position", 1, 0, 0, 100, 0 +etbBiasValues = array, F32, 4588, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2 +iacPidMultTable = array, U08, 4620, [8x8], "%", 0.05, 0, 0, 10, 2 +iacPidMultLoadBins = array, U08, 4684, [8], "Load", 1, 0, 0, 500, 2 +iacPidMultRpmBins = array, U08, 4692, [8], "RPM", 10.0, 0, 0, 2500, 0 +sparkDwellRpmBins = array, U16, 4700, [8], "RPM", 1, 0, 0, 25000, 0 +sparkDwellValues = array, U16, 4716, [8], "ms", 0.01, 0, 0, 30, 2 +cltIdleRpmBins = array, S08, 4732, [16], "C", 2.0, 0, -40, 200, 0 +cltIdleRpm = array, U08, 4748, [16], "RPM", 20.0, 0, 0, 5000, 0 +cltTimingBins = array, F32, 4764, [8], "C", 1, 0, -100, 250, 1 +cltTimingExtra = array, F32, 4796, [8], "degree", 1, 0, -400, 400, 0 +scriptCurve1Bins = array, F32, 4828, [16], "x", 1, 0, -10000, 10000, 3 +scriptCurve1 = array, F32, 4892, [16], "y", 1, 0, -10000, 10000, 3 +scriptCurve2Bins = array, F32, 4956, [16], "x", 1, 0, -10000, 10000, 3 +scriptCurve2 = array, F32, 5020, [16], "y", 1, 0, -10000, 10000, 3 +scriptCurve3Bins = array, F32, 5084, [8], "x", 1, 0, -10000, 10000, 3 +scriptCurve3 = array, F32, 5116, [8], "y", 1, 0, -10000, 10000, 3 +scriptCurve4Bins = array, F32, 5148, [8], "x", 1, 0, -10000, 10000, 3 +scriptCurve4 = array, F32, 5180, [8], "y", 1, 0, -10000, 10000, 3 +scriptCurve5Bins = array, F32, 5212, [8], "x", 1, 0, -10000, 10000, 3 +scriptCurve5 = array, F32, 5244, [8], "y", 1, 0, -10000, 10000, 3 +scriptCurve6Bins = array, F32, 5276, [8], "x", 1, 0, -10000, 10000, 3 +scriptCurve6 = array, F32, 5308, [8], "y", 1, 0, -10000, 10000, 3 +baroCorrPressureBins = array, F32, 5340, [4], "kPa", 1, 0, 0, 200, 2 +baroCorrRpmBins = array, F32, 5356, [4], "RPM", 1, 0, 0, 18000, 0 +baroCorrTable = array, F32, 5372, [4x4], "ratio", 1, 0, 0, 2, 2 +crankingTpsCoef = array, F32, 5436, [8], "Ratio", 1, 0, 0, 700, 2 +crankingTpsBins = array, F32, 5468, [8], "%", 1, 0, 0, 100, 2 +narrowToWideOxygenBins = array, F32, 5500, [8], "V", 1, 0, -10, 10, 3 +narrowToWideOxygen = array, F32, 5532, [8], "ratio", 1, 0, -40, 40, 2 +crankingAdvanceBins = array, U16, 5564, [4], "RPM", 1, 0, 0, 25000, 0 +crankingAdvance = array, S16, 5572, [4], "deg", 0.01, 0, -20, 90, 2 +iacCoastingRpmBins = array, U08, 5580, [16], "RPM", 100.0, 0, 0, 25000, 0 +iacCoasting = array, U08, 5596, [16], "%", 0.5, 0, 0, 100, 1 +warning_message = string, ASCII, 5612, 120 +afterstartCoolantBins = array, F32, 5732, [8], "C", 1, 0, -100, 250, 0 +afterstartHoldTime = array, F32, 5764, [8], "Seconds", 1, 0, 0, 100, 1 +afterstartEnrich = array, F32, 5796, [8], "%", 1, 0, 0, 600, 1 +afterstartDecayTime = array, F32, 5828, [8], "Seconds", 1, 0, 0, 100, 1 +boostTableOpenLoop = array, U08, 5860, [8x8], "", 0.5, 0, 0, 100, 1 +boostRpmBins = array, U08, 5924, [8], "RPM", 100.0, 0, 0, 25000, 0 +boostTableClosedLoop = array, U08, 5932, [8x8], "", 2.0, 0, 0, 3000, 0 +boostTpsBins = array, U08, 5996, [8], "%", 1, 0, 0, 100, 0 +pedalToTpsTable = array, U08, 6004, [8x8], "%", 1, 0, 0, 100, 0 +pedalToTpsPedalBins = array, U08, 6068, [8], "%", 1, 0, 0, 120, 0 +pedalToTpsRpmBins = array, U08, 6076, [8], "RPM", 100.0, 0, 0, 25000, 0 +cltCrankingCorrBins = array, F32, 6084, [8], "C", 1, 0, -100, 250, 2 +cltCrankingCorr = array, F32, 6116, [8], "%", 1, 0, 0, 500, 2 +idleAdvanceBins = array, U08, 6148, [8], "RPM", 50.0, 0, 0, 12000, 0 +idleAdvance = array, F32, 6156, [8], "deg", 1, 0, -20, 90, 1 +idleVeRpmBins = array, U08, 6188, [4], "RPM", 10.0, 0, 0, 2500, 0 +idleVeLoadBins = array, U08, 6192, [4], "load", 1, 0, 0, 100, 0 +idleVeTable = array, U16, 6196, [4x4], "%", 0.1, 0, 0, 999, 1 +luaScript = string, ASCII, 6228, 8000 +cltFuelCorrBins = array, F32, 14228, [16], "C", 1, 0, -100, 250, 2 +cltFuelCorr = array, F32, 14292, [16], "ratio", 1, 0, 0, 5, 2 +iatFuelCorrBins = array, F32, 14356, [16], "C", 1, 0, -100, 250, 2 +iatFuelCorr = array, F32, 14420, [16], "ratio", 1, 0, 0, 5, 2 +crankingFuelCoef = array, F32, 14484, [8], "ratio", 1, 0, 0, 50, 2 +crankingFuelBins = array, F32, 14516, [8], "C", 1, 0, -80, 170, 2 +crankingCycleCoef = array, F32, 14548, [8], "ratio", 1, 0, 0, 5, 2 +crankingCycleBins = array, F32, 14580, [8], "counter", 1, 0, -80, 170, 0 +cltIdleCorrBins = array, F32, 14612, [16], "C", 1, 0, -100, 250, 2 +cltIdleCorr = array, F32, 14676, [16], "ratio", 1, 0, 0, 10, 2 +mafDecoding = array, F32, 14740, [256], "kg/hour", 1, 0, -500, 4000, 2 +mafDecodingBins = array, F32, 15764, [256], "V", 1, 0, -5, 150, 2 +ignitionIatCorrTable = array, S08, 16788, [8x8], "deg", 0.1, 0, -25, 25, 1 +ignitionIatCorrTempBins = array, S08, 16852, [8], "C", 1, 0, -40, 120, 0 +ignitionIatCorrLoadBins = array, U08, 16860, [8], "Load", 5.0, 0, 0, 1000, 0 +injectionPhase = array, S16, 16868, [16x16], "deg", 1, 0, -720, 720, 0 +injPhaseLoadBins = array, U16, 17380, [16], "Load", 1, 0, 0, 1000, 0 +injPhaseRpmBins = array, U16, 17412, [16], "RPM", 1, 0, 0, 18000, 0 +tcuSolenoidTable = array, U08, 17444, [10x6], "onoff", 1, 0, 0, 1, 0 +mapEstimateTable = array, U16, 17504, [16x16], "kPa", 0.01, 0, 0, 600, 2 +mapEstimateTpsBins = array, U16, 18016, [16], "% TPS", 0.01, 0, 0, 100, 1 +mapEstimateRpmBins = array, U16, 18048, [16], "RPM", 1, 0, 0, 18000, 0 +vvtTable1 = array, S08, 18080, [8x8], "value", 1, 0, -125, 125, 0 +vvtTable1LoadBins = array, U16, 18144, [8], "L", 1, 0, 0, 1000, 0 +vvtTable1RpmBins = array, U16, 18160, [8], "RPM", 1, 0, 0, 18000, 0 +vvtTable2 = array, S08, 18176, [8x8], "value", 1, 0, -125, 125, 0 +vvtTable2LoadBins = array, U16, 18240, [8], "L", 1, 0, 0, 1000, 0 +vvtTable2RpmBins = array, U16, 18256, [8], "RPM", 1, 0, 0, 18000, 0 +ignitionTable = array, S16, 18272, [16x16], "deg", 0.1, 0, -20, 90, 1 +ignitionLoadBins = array, U16, 18784, [16], "Load", 1, 0, 0, 1000, 0 +ignitionRpmBins = array, U16, 18816, [16], "RPM", 1, 0, 0, 18000, 0 +veTable = array, U16, 18848, [16x16], "%", 0.1, 0, 0, 999, 1 +veLoadBins = array, U16, 19360, [16], "kPa", 1, 0, 0, 1000, 0 +veRpmBins = array, U16, 19392, [16], "RPM", 1, 0, 0, 18000, 0 +#if LAMBDA +lambdaTable = array, U08, 19424, [16x16], "lambda", 0.006802721088435374, 0, 0.6, 1.5, 2 +#else +lambdaTable = array, U08, 19424, [16x16], "afr", 0.1, 0, 0, 25, 1 +#endif +lambdaLoadBins = array, U16, 19680, [16], "", 1, 0, 0, 1000, 0 +lambdaRpmBins = array, U16, 19712, [16], "RPM", 1, 0, 0, 18000, 0 +tpsTpsAccelTable = array, F32, 19744, [8x8], "value", 1, 0, 0, 30000, 2 +tpsTpsAccelFromRpmBins = array, F32, 20000, [8], "from", 1, 0, 0, 30000, 2 +tpsTpsAccelToRpmBins = array, F32, 20032, [8], "to", 1, 0, 0, 25500, 2 +scriptTable1 = array, F32, 20064, [8x8], "value", 1, 0, -100000, 100000, 2 +scriptTable1LoadBins = array, S16, 20320, [8], "L", 1, 0, -32000, 32000, 0 +scriptTable1RpmBins = array, S16, 20336, [8], "RPM", 1, 0, -32000, 32000, 0 +scriptTable2 = array, U08, 20352, [8x8], "value", 1, 0, 0, 255, 0 +scriptTable2LoadBins = array, S16, 20416, [8], "L", 1, 0, -32000, 32000, 0 +scriptTable2RpmBins = array, S16, 20432, [8], "RPM", 1, 0, -32000, 32000, 0 +scriptTable3 = array, U08, 20448, [8x8], "value", 1, 0, 0, 255, 0 +scriptTable3LoadBins = array, S16, 20512, [8], "L", 1, 0, -32000, 32000, 0 +scriptTable3RpmBins = array, S16, 20528, [8], "RPM", 1, 0, -32000, 32000, 0 +scriptTable4 = array, U08, 20544, [10x8], "value", 1, 0, 0, 255, 0 +scriptTable4LoadBins = array, S16, 20624, [8], "L", 1, 0, -32000, 32000, 0 +scriptTable4RpmBins = array, S16, 20640, [10], "RPM", 1, 0, -32000, 32000, 0 +ignTrimLoadBins = array, U16, 20660, [4], "", 1, 0, 0, 1000, 0 +ignTrimRpmBins = array, U16, 20668, [4], "rpm", 1, 0, 0, 20000, 0 +ignTrims1_table = array, S08, 20676, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims2_table = array, S08, 20692, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims3_table = array, S08, 20708, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims4_table = array, S08, 20724, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims5_table = array, S08, 20740, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims6_table = array, S08, 20756, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims7_table = array, S08, 20772, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims8_table = array, S08, 20788, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims9_table = array, S08, 20804, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims10_table = array, S08, 20820, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims11_table = array, S08, 20836, [4x4], "", 0.2, 0, -25, 25, 1 +ignTrims12_table = array, S08, 20852, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrimLoadBins = array, U16, 20868, [4], "", 1, 0, 0, 1000, 0 +fuelTrimRpmBins = array, U16, 20876, [4], "rpm", 1, 0, 0, 20000, 0 +fuelTrims1_table = array, S08, 20884, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims2_table = array, S08, 20900, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims3_table = array, S08, 20916, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims4_table = array, S08, 20932, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims5_table = array, S08, 20948, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims6_table = array, S08, 20964, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims7_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims8_table = array, S08, 20996, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims9_table = array, S08, 21012, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims10_table = array, S08, 21028, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims11_table = array, S08, 21044, [4x4], "", 0.2, 0, -25, 25, 1 +fuelTrims12_table = array, S08, 21060, [4x4], "", 0.2, 0, -25, 25, 1 +crankingFuelCoefE100 = array, U16, 21076, [8], "ratio", 0.01, 0, 0, 50, 2 +tcu_pcAirmassBins = array, U08, 21092, [8], "Airmass", 0.02, 0, 0, 255, 2 +tcu_pcValsR = array, U08, 21100, [8], "%", 1, 0, 0, 255, 0 +tcu_pcValsN = array, U08, 21108, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals1 = array, U08, 21116, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals2 = array, U08, 21124, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals3 = array, U08, 21132, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals4 = array, U08, 21140, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals12 = array, U08, 21148, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals23 = array, U08, 21156, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals34 = array, U08, 21164, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals21 = array, U08, 21172, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals32 = array, U08, 21180, [8], "%", 1, 0, 0, 255, 0 +tcu_pcVals43 = array, U08, 21188, [8], "%", 1, 0, 0, 255, 0 +tcu_tccTpsBins = array, U08, 21196, [8], "TPS", 1, 0, 0, 255, 0 +tcu_tccLockSpeed = array, U08, 21204, [8], "MPH", 1, 0, 0, 255, 0 +tcu_tccUnlockSpeed = array, U08, 21212, [8], "MPH", 1, 0, 0, 255, 0 +tcu_32SpeedBins = array, U08, 21220, [8], "KPH", 1, 0, 0, 255, 0 +tcu_32Vals = array, U08, 21228, [8], "%", 1, 0, 0, 255, 0 +throttle2TrimTable = array, S08, 21236, [6x6], "%", 0.1, 0, -10, 10, 1 +throttle2TrimTpsBins = array, U08, 21272, [6], "%", 1, 0, 0, 120, 0 +throttle2TrimRpmBins = array, U08, 21278, [6], "RPM", 100.0, 0, 0, 25000, 0 +maxKnockRetardTable = array, U08, 21284, [6x6], "deg", 0.25, 0, 0, 30, 2 +maxKnockRetardLoadBins = array, U08, 21320, [6], "%", 1, 0, 0, 250, 0 +maxKnockRetardRpmBins = array, U08, 21326, [6], "RPM", 100.0, 0, 0, 25000, 0 +ALSTimingRetardTable = array, S16, 21332, [4x4], "deg", 0.1, 0, -60, 0, 1 +alsIgnRetardLoadBins = array, U16, 21364, [4], "TPS", 1, 0, 0, 100, 0 +alsIgnRetardrpmBins = array, U16, 21372, [4], "RPM", 1, 0, 0, 25000, 0 +ALSFuelAdjustment = array, S16, 21380, [4x4], "percent", 0.1, 0, 0, 50, 1 +alsFuelAdjustmentLoadBins = array, U16, 21412, [4], "TPS", 1, 0, 0, 100, 0 +alsFuelAdjustmentrpmBins = array, U16, 21420, [4], "RPM", 1, 0, 0, 25000, 0 +ALSIgnSkipTable = array, S16, 21428, [4x4], "ratio", 10.0, 0, 0, 50, 1 +alsIgnSkipLoadBins = array, U16, 21460, [4], "TPS", 1, 0, 0, 100, 0 +alsIgnSkiprpmBins = array, U16, 21468, [4], "RPM", 1, 0, 0, 25000, 0 +ignBlends1_table = array, S16, 21476, [8x8], "", 0.1, 0, -100, 100, 1 +ignBlends1_loadBins = array, U16, 21604, [8], "Load", 1, 0, 0, 1000, 0 +ignBlends1_rpmBins = array, U16, 21620, [8], "RPM", 1, 0, 0, 18000, 0 +ignBlends1_blendParameter = bits, U08, 21636, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +ignBlends1_blendBins = array, S16, 21638, [8], "", 0.1, 0, -1000, 1000, 1 +ignBlends1_blendValues = array, U08, 21654, [8], "%", 0.5, 0, 0, 100, 1 +ignBlends2_table = array, S16, 21664, [8x8], "", 0.1, 0, -100, 100, 1 +ignBlends2_loadBins = array, U16, 21792, [8], "Load", 1, 0, 0, 1000, 0 +ignBlends2_rpmBins = array, U16, 21808, [8], "RPM", 1, 0, 0, 18000, 0 +ignBlends2_blendParameter = bits, U08, 21824, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +ignBlends2_blendBins = array, S16, 21826, [8], "", 0.1, 0, -1000, 1000, 1 +ignBlends2_blendValues = array, U08, 21842, [8], "%", 0.5, 0, 0, 100, 1 +ignBlends3_table = array, S16, 21852, [8x8], "", 0.1, 0, -100, 100, 1 +ignBlends3_loadBins = array, U16, 21980, [8], "Load", 1, 0, 0, 1000, 0 +ignBlends3_rpmBins = array, U16, 21996, [8], "RPM", 1, 0, 0, 18000, 0 +ignBlends3_blendParameter = bits, U08, 22012, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +ignBlends3_blendBins = array, S16, 22014, [8], "", 0.1, 0, -1000, 1000, 1 +ignBlends3_blendValues = array, U08, 22030, [8], "%", 0.5, 0, 0, 100, 1 +ignBlends4_table = array, S16, 22040, [8x8], "", 0.1, 0, -100, 100, 1 +ignBlends4_loadBins = array, U16, 22168, [8], "Load", 1, 0, 0, 1000, 0 +ignBlends4_rpmBins = array, U16, 22184, [8], "RPM", 1, 0, 0, 18000, 0 +ignBlends4_blendParameter = bits, U08, 22200, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +ignBlends4_blendBins = array, S16, 22202, [8], "", 0.1, 0, -1000, 1000, 1 +ignBlends4_blendValues = array, U08, 22218, [8], "%", 0.5, 0, 0, 100, 1 +veBlends1_table = array, S16, 22228, [8x8], "", 0.1, 0, -100, 100, 1 +veBlends1_loadBins = array, U16, 22356, [8], "Load", 1, 0, 0, 1000, 0 +veBlends1_rpmBins = array, U16, 22372, [8], "RPM", 1, 0, 0, 18000, 0 +veBlends1_blendParameter = bits, U08, 22388, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +veBlends1_blendBins = array, S16, 22390, [8], "", 0.1, 0, -1000, 1000, 1 +veBlends1_blendValues = array, U08, 22406, [8], "%", 0.5, 0, 0, 100, 1 +veBlends2_table = array, S16, 22416, [8x8], "", 0.1, 0, -100, 100, 1 +veBlends2_loadBins = array, U16, 22544, [8], "Load", 1, 0, 0, 1000, 0 +veBlends2_rpmBins = array, U16, 22560, [8], "RPM", 1, 0, 0, 18000, 0 +veBlends2_blendParameter = bits, U08, 22576, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +veBlends2_blendBins = array, S16, 22578, [8], "", 0.1, 0, -1000, 1000, 1 +veBlends2_blendValues = array, U08, 22594, [8], "%", 0.5, 0, 0, 100, 1 +veBlends3_table = array, S16, 22604, [8x8], "", 0.1, 0, -100, 100, 1 +veBlends3_loadBins = array, U16, 22732, [8], "Load", 1, 0, 0, 1000, 0 +veBlends3_rpmBins = array, U16, 22748, [8], "RPM", 1, 0, 0, 18000, 0 +veBlends3_blendParameter = bits, U08, 22764, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +veBlends3_blendBins = array, S16, 22766, [8], "", 0.1, 0, -1000, 1000, 1 +veBlends3_blendValues = array, U08, 22782, [8], "%", 0.5, 0, 0, 100, 1 +veBlends4_table = array, S16, 22792, [8x8], "", 0.1, 0, -100, 100, 1 +veBlends4_loadBins = array, U16, 22920, [8], "Load", 1, 0, 0, 1000, 0 +veBlends4_rpmBins = array, U16, 22936, [8], "RPM", 1, 0, 0, 18000, 0 +veBlends4_blendParameter = bits, U08, 22952, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +veBlends4_blendBins = array, S16, 22954, [8], "", 0.1, 0, -1000, 1000, 1 +veBlends4_blendValues = array, U08, 22970, [8], "%", 0.5, 0, 0, 100, 1 +throttleEstimateEffectiveAreaBins = array, U16, 22980, [12], "%", 0.1, 0, 0, 100, 1 +throttleEstimateEffectiveAreaValues = array, U16, 23004, [12], "g/s", 0.1, 0, 0, 6500, 1 +boostOpenLoopBlends1_table = array, S16, 23028, [8x8], "", 0.1, 0, -100, 100, 1 +boostOpenLoopBlends1_loadBins = array, U16, 23156, [8], "Load", 1, 0, 0, 1000, 0 +boostOpenLoopBlends1_rpmBins = array, U16, 23172, [8], "RPM", 1, 0, 0, 18000, 0 +boostOpenLoopBlends1_blendParameter = bits, U08, 23188, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +boostOpenLoopBlends1_blendBins = array, S16, 23190, [8], "", 0.1, 0, -1000, 1000, 1 +boostOpenLoopBlends1_blendValues = array, U08, 23206, [8], "%", 0.5, 0, 0, 100, 1 +boostOpenLoopBlends2_table = array, S16, 23216, [8x8], "", 0.1, 0, -100, 100, 1 +boostOpenLoopBlends2_loadBins = array, U16, 23344, [8], "Load", 1, 0, 0, 1000, 0 +boostOpenLoopBlends2_rpmBins = array, U16, 23360, [8], "RPM", 1, 0, 0, 18000, 0 +boostOpenLoopBlends2_blendParameter = bits, U08, 23376, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +boostOpenLoopBlends2_blendBins = array, S16, 23378, [8], "", 0.1, 0, -1000, 1000, 1 +boostOpenLoopBlends2_blendValues = array, U08, 23394, [8], "%", 0.5, 0, 0, 100, 1 +boostClosedLoopBlends1_table = array, S16, 23404, [8x8], "", 0.1, 0, -100, 100, 1 +boostClosedLoopBlends1_loadBins = array, U16, 23532, [8], "Load", 1, 0, 0, 1000, 0 +boostClosedLoopBlends1_rpmBins = array, U16, 23548, [8], "RPM", 1, 0, 0, 18000, 0 +boostClosedLoopBlends1_blendParameter = bits, U08, 23564, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +boostClosedLoopBlends1_blendBins = array, S16, 23566, [8], "", 0.1, 0, -1000, 1000, 1 +boostClosedLoopBlends1_blendValues = array, U08, 23582, [8], "%", 0.5, 0, 0, 100, 1 +boostClosedLoopBlends2_table = array, S16, 23592, [8x8], "", 0.1, 0, -100, 100, 1 +boostClosedLoopBlends2_loadBins = array, U16, 23720, [8], "Load", 1, 0, 0, 1000, 0 +boostClosedLoopBlends2_rpmBins = array, U16, 23736, [8], "RPM", 1, 0, 0, 18000, 0 +boostClosedLoopBlends2_blendParameter = bits, U08, 23752, [0:4], "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +boostClosedLoopBlends2_blendBins = array, S16, 23754, [8], "", 0.1, 0, -1000, 1000, 1 +boostClosedLoopBlends2_blendValues = array, U08, 23770, [8], "%", 0.5, 0, 0, 100, 1 +tcu_rangeP = array, U08, 23780, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeR = array, U08, 23786, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeN = array, U08, 23792, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeD = array, U08, 23798, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeM = array, U08, 23804, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeM3 = array, U08, 23810, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeM2 = array, U08, 23816, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeM1 = array, U08, 23822, [6], "level", 1, 0, 0, 3, 0 +tcu_rangePlus = array, U08, 23828, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeMinus = array, U08, 23834, [6], "level", 1, 0, 0, 3, 0 +tcu_rangeLow = array, U08, 23840, [6], "level", 1, 0, 0, 3, 0 +lambdaMaxDeviationTable = array, U08, 23846, [4x4], "lambda", 0.01, 0, 0, 1, 2 +lambdaMaxDeviationLoadBins = array, U16, 23862, [4], "", 1, 0, 0, 1000, 0 +lambdaMaxDeviationRpmBins = array, U16, 23870, [4], "RPM", 1, 0, 0, 18000, 0 +; total TS size = 23880 +[SettingContextHelp] + engineType = "http://rusefi.com/wiki/index.php?title=Manual:Engine_Type\nset engine_type X" + sensorSnifferRpmThreshold = "Disable sensor sniffer above this rpm" + launchRpm = "A secondary Rev limit engaged by the driver to help launch the vehicle faster" + rpmHardLimit = "set rpm_hard_limit X" + engineSnifferRpmThreshold = "Engine sniffer would be disabled above this rpm\nset engineSnifferRpmThreshold X" + multisparkMaxRpm = "Disable multispark above this engine speed." + maxAcRpm = "Above this RPM, disable AC. Set to 0 to disable check." + maxAcTps = "Above this TPS, disable AC. Set to 0 to disable check." + maxAcClt = "Above this CLT, disable AC to prevent overheating the engine. Set to 0 to disable check." + multisparkMaxSparkingAngle = "This parameter sets the latest that the last multispark can occur after the main ignition event. For example, if the ignition timing is 30 degrees BTDC, and this parameter is set to 45, no multispark will ever be fired after 15 degrees ATDC." + multisparkMaxExtraSparkCount = "Configures the maximum number of extra sparks to fire (does not include main spark)" + injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min" + injector_battLagCorr = "ms delay between injector open and close dead times" + isForcedInduction = "Does the vehicle have a turbo or supercharger?" + useFordRedundantTps = "On some Ford and Toyota vehicles one of the throttle sensors is not linear on the full range, i.e. in the specific range of the positions we effectively have only one sensor." + enableFan1WithAc = "Turn on this fan when AC is on." + enableFan2WithAc = "Turn on this fan when AC is on." + disableFan1WhenStopped = "Inhibit operation of this fan while the engine is not running." + disableFan2WhenStopped = "Inhibit operation of this fan while the engine is not running." + enableTrailingSparks = "Enable secondary spark outputs that fire after the primary (rotaries, twin plug engines)." + etb_use_two_wires = "TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode." + isDoubleSolenoidIdle = "Subaru/BMW style where default valve position is somewhere in the middle. First solenoid opens it more while second can close it more than default position." + useCicPidForIdle = "Switch between Industrial and Cic PID implementation" + useSeparateIdleTablesForCrankingTaper = "This uses separate ignition timing and VE tables not only for idle conditions, also during the postcranking-to-idle taper transition (See also afterCrankingIACtaperDuration)." + doNotFilterTriggerEdgeNoise = "Detect double trigger edges" + useRunningMathForCranking = "For cranking either use the specified fixed base fuel mass, or use the normal running math (VE table)." + displayLogicLevelsInEngineSniffer = "Shall we display real life signal or just the part consumed by trigger decoder.\nApplies to both trigger and cam/vvt input.\n\nenable logic_level_trigger" + verboseCan = "Print incoming and outgoing first bus CAN messages in rusEFI console" + artificialTestMisfire = "Experimental setting that will cause a misfire\nDO NOT ENABLE." + useFordRedundantPps = "On some Ford and Toyota vehicles one of the pedal sensors is not linear on the full range, i.e. in the specific range of the positions we effectively have only one sensor." + tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X" + tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X" + tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped." + tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped." + cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel." + cranking_rpm = "This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450rpm. \nset cranking_rpm X" + ignitionDwellForCrankingMs = "Dwell duration while cranking" + etbRevLimitStart = "Once engine speed passes this value, start reducing ETB angle." + etbRevLimitRange = "This far above 'Soft limiter start', fully close the throttle. At the bottom of the range, throttle control is normal. At the top of the range, the throttle is fully closed." + map_samplingAngle = "MAP averaging sampling start crank degree angle" + map_samplingWindow = "MAP averaging angle crank degree duration" + map_sensor_lowValue = "kPa value at low volts" + map_sensor_highValue = "kPa value at high volts" + clt_tempC_1 = "these values are in Celcius" + clt_bias_resistor = "Pull-up resistor value on your board" + iat_tempC_1 = "these values are in Celcius" + iat_bias_resistor = "Pull-up resistor value on your board" + hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields" + knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect" + displacement = "Engine displacement in litres" + cylindersCount = "Number of cylinder the engine has." + cylinderBore = "Cylinder diameter in mm." + fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." + crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." + boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." + boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." + boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." + crankingTimingAngle = "Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.\nThere is tapering towards running timing advance\nset cranking_timing_angle X" + ignitionMode = "Single coil = distributor\nIndividual coils = one coil per cylinder (COP, coil-near-plug), requires sequential mode\nWasted spark = Fires pairs of cylinders together, either one coil per pair of cylinders or one coil per cylinder\nTwo distributors = A pair of distributors, found on some BMW, Toyota and other engines\nset ignition_mode X" + gapTrackingLengthOverride = "How many consecutive gap rations have to match expected ranges for sync to happen" + maxIdleVss = "Above this speed, disable closed loop idle control. Set to 0 to disable (allow closed loop idle at any speed)." + minOilPressureAfterStart = "Expected oil pressure after starting the engine. If oil pressure does not reach this level within 5 seconds of engine start, fuel will be cut. Set to 0 to disable and always allow starting." + timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing with a timing light)." + fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location." + globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X" + analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v." + vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading." + fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius" + fanOffTemperature = "Cooling fan turn-off temperature threshold, in Celsius" + driveWheelRevPerKm = "Number of revolutions per kilometer for the wheels your vehicle speed sensor is connected to. Use an online calculator to determine this based on your tire size." + canNbcType = "set can_mode X" + canSleepPeriodMs = "CANbus thread period in ms" + tps1_1AdcChannel = "First throttle body, first sensor. See also pedalPositionAdcChannel" + vbattAdcChannel = "This is the processor input pin that the battery voltage circuit is connected to, if you are unsure of what pin to use, check the schematic that corresponds to your PCB." + fuelLevelSensor = "This is the processor pin that your fuel level sensor in connected to. This is a non standard input so will need to be user defined." + tps2_1AdcChannel = "Second throttle body position sensor, single channel so far\nset_analog_input_pin tps2 X" + idle_derivativeFilterLoss = "0.1 is a good default value" + trailingSparkAngle = "just a temporary solution" + trigger_type = "https://github.com/rusefi/rusefi/wiki/All-Supported-Triggers\nset trigger_type X" + airByRpmTaper = "Extra air taper amount" + boostControlSafeDutyCycle = "Duty cycle to use in case of a sensor failure. This duty cycle should produce the minimum possible amount of boost. This duty is also used in case any of the minimum RPM/TPS/MAP conditions are not met." + camInputs1 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts. 1" + camInputs2 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts. 2" + camInputs3 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts. 3" + camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts. 4" + throttlePedalPositionAdcChannel = "Electronic throttle pedal position first channel\nSee throttlePedalPositionSecondAdcChannel for second channel\nSee also tps1_1AdcChannel\nset_analog_input_pin pps X\nSee throttlePedalUpVoltage and throttlePedalWOTVoltage" + etbSplit = "TPS/PPS error threshold" + throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata" + baroSensor_lowValue = "kPa value at low volts" + baroSensor_highValue = "kPa value at high volts" + manIdlePosition = "Value between 0 and 100 used in Manual mode" + knockRetardAggression = "Ignition timing to remove when a knock event occurs." + knockRetardReapplyRate = "After a knock event, reapply timing at this rate." + engineSyncCam = "Select which cam is used for engine sync. Other cams will be used only for VVT measurement, but not engine sync." + vssFilterReciprocal = "Set this so your vehicle speed signal is responsive, but not noisy. Larger value give smoother but slower response." + vssGearRatio = "Number of turns of your vehicle speed sensor per turn of the wheels. For example if your sensor is on the transmission output, enter your axle/differential ratio. If you are using a hub-mounted sensor, enter a value of 1.0." + vssToothCount = "Number of pulses output per revolution of the shaft where your VSS is mounted. For example, GM applications of the T56 output 17 pulses per revolution of the transmission output shaft." + idleVeOverrideMode = "Override the Y axis (load) value used for only the Idle VE table.\nAdvanced users only: If you aren't sure you need this, you probably don't need this." + injectionPins1 = "injectionPins 1" + injectionPins2 = "injectionPins 2" + injectionPins3 = "injectionPins 3" + injectionPins4 = "injectionPins 4" + injectionPins5 = "injectionPins 5" + injectionPins6 = "injectionPins 6" + injectionPins7 = "injectionPins 7" + injectionPins8 = "injectionPins 8" + injectionPins9 = "injectionPins 9" + injectionPins10 = "injectionPins 10" + injectionPins11 = "injectionPins 11" + injectionPins12 = "injectionPins 12" + ignitionPins1 = "ignitionPins 1" + ignitionPins2 = "ignitionPins 2" + ignitionPins3 = "ignitionPins 3" + ignitionPins4 = "ignitionPins 4" + ignitionPins5 = "ignitionPins 5" + ignitionPins6 = "ignitionPins 6" + ignitionPins7 = "ignitionPins 7" + ignitionPins8 = "ignitionPins 8" + ignitionPins9 = "ignitionPins 9" + ignitionPins10 = "ignitionPins 10" + ignitionPins11 = "ignitionPins 11" + ignitionPins12 = "ignitionPins 12" + gapVvtTrackingLengthOverride = "How many consecutive VVT gap rations have to match expected ranges for sync to happen" + malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot." + clutchDownPin = "Some cars have a switch to indicate that clutch pedal is all the way down" + digitalPotentiometerChipSelect1 = "digitalPotentiometerChipSelect 1" + digitalPotentiometerChipSelect2 = "digitalPotentiometerChipSelect 2" + digitalPotentiometerChipSelect3 = "digitalPotentiometerChipSelect 3" + digitalPotentiometerChipSelect4 = "digitalPotentiometerChipSelect 4" + digitalPotentiometerSpiDevice = "Digital Potentiometer is used by stock ECU stimulation code" + auxFastSensor1_adcChannel = "Useful in Research&Development phase" + tps1_2AdcChannel = "First throttle body, second sensor." + tps2_2AdcChannel = "Second throttle body, second sensor." + throttlePedalPositionSecondAdcChannel = "Electronic throttle pedal position input\nSecond channel\nSee also tps1_1AdcChannel\nSee throttlePedalSecondaryUpVoltage and throttlePedalSecondaryWOTVoltage" + afr_type = "AFR, WBO, EGO - whatever you like to call it" + mc33810_cs1 = "mc33810_cs 1" + idle_antiwindupFreq = "0.1 is a good default value" + triggerInputPins1 = "triggerInputPins 1" + triggerInputPins2 = "triggerInputPins 2" + mc33_t_min_boost = "Minimum allowed time for the boost phase. If the boost target current is reached before this time elapses, it is assumed that the injector has failed short circuit." + canTxPin = "set_can_tx_pin X" + canRxPin = "set_can_rx_pin X" + acIdleExtraOffset = "Additional idle % while A/C is active" + finalGearRatio = "Ratio between the wheels and your transmission output." + wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!" + wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units" + idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!" + idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units" + tunerStudioSerialSpeed = "Secondary TTL channel baud rate" + compressionRatio = "Just for reference really, not taken into account by any logic at this point" + triggerSimulatorPins1 = "Each rusEFI piece can provide synthetic trigger signal for external ECU. Sometimes these wires are routed back into trigger inputs of the same rusEFI board.\nSee also directSelfStimulation which is different. 1" + triggerSimulatorPins2 = "Each rusEFI piece can provide synthetic trigger signal for external ECU. Sometimes these wires are routed back into trigger inputs of the same rusEFI board.\nSee also directSelfStimulation which is different. 2" + triggerSimulatorPinModes1 = "triggerSimulatorPinModes 1" + triggerSimulatorPinModes2 = "triggerSimulatorPinModes 2" + o2heaterPin = "On-off O2 sensor heater control. 'ON' if engine is running, 'OFF' if stopped or cranking." + isSdCardEnabled = "enable sd/disable sd" + rusefiVerbose29b = "Use 11 bit (standard) or 29 bit (extended) IDs for rusEFI verbose CAN format." + useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed." + enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast" + measureMapOnlyInOneCylinder = "Useful for individual intakes" + isFasterEngineSpinUpEnabled = "If enabled, try to fire the engine before a full engine cycle has been completed using RPM estimated from the last 90 degrees of engine rotation. As soon as the trigger syncs plus 90 degrees rotation, fuel and ignition events will occur. If disabled, worst case may require up to 4 full crank rotations before any events are scheduled." + coastingFuelCutEnabled = "This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing." + useIacTableForCoasting = "Override the IAC position during overrun conditions to help reduce engine breaking, this can be helpful for large engines in light weight cars or engines that have trouble returning to idle." + disableEtbWhenEngineStopped = "Allows disabling the ETB when the engine is stopped. You may not like the power draw or PWM noise from the motor, so this lets you turn it off until it's necessary." + pauseEtbControl = "Disable the electronic throttle motor and DC idle motor for testing.\nThis mode is for testing ETB/DC idle position sensors, etc without actually driving the throttle." + enableAemXSeries = "AEM X-Series or rusEFI Wideband" + logicAnalyzerPins1 = "logicAnalyzerPins 1" + logicAnalyzerPins2 = "logicAnalyzerPins 2" + logicAnalyzerPins3 = "logicAnalyzerPins 3" + logicAnalyzerPins4 = "logicAnalyzerPins 4" + mc33_hvolt = "Boost Voltage" + minimumBoostClosedLoopMap = "Minimum MAP before closed loop boost is enabled. Use to prevent misbehavior upon entering boost." + acFanPin = "Optional Radiator Fan used with A/C" + idlePidRpmUpperLimit = "How far above idle speed do we consider idling, i.e. coasting detection threshold.\nFor example, if target = 800, this param = 200, then anything below 1000 RPM is considered idle." + applyNonlinearBelowPulse = "Apply nonlinearity correction below a pulse of this duration. Pulses longer than this duration will receive no adjustment." + clutchUpPin = "Some vehicles have a switch to indicate that clutch pedal is all the way up" + max31855_cs1 = "max31855_cs 1" + max31855_cs2 = "max31855_cs 2" + max31855_cs3 = "max31855_cs 3" + max31855_cs4 = "max31855_cs 4" + max31855_cs5 = "max31855_cs 5" + max31855_cs6 = "max31855_cs 6" + max31855_cs7 = "max31855_cs 7" + max31855_cs8 = "max31855_cs 8" + flexSensorPin = "Continental/GM flex fuel sensor, 50-150hz type" + stoichRatioSecondary = "Stoichiometric ratio for your secondary fuel. This value is used when the Flex Fuel sensor indicates E100, typically 9.0" + etbMaximumPosition = "Maximum allowed ETB position. Some throttles go past fully open, so this allows you to limit it to fully open." + sdCardLogFrequency = "Rate the ECU will log to the SD card, in hz (log lines per second)." + starterRelayDisablePinMode = "On some vehicles we can disable starter once engine is already running" + secondSolenoidPin = "Some Subaru and some Mazda use double-solenoid idle air valve" + startStopButtonPin = "See also starterControlPin" + mapMinBufferLength = "This many MAP samples are used to estimate the current MAP. This many samples are considered, and the minimum taken. Recommended value is 1 for single-throttle engines, and your number of cylinders for individual throttle bodies." + idlePidDeactivationTpsThreshold = "Below this throttle position, the engine is considered idling. If you have an electronic throttle, this checks accelerator pedal position instead of throttle position, and should be set to 1-2%." + startCrankingDuration = "Maximum time to crank starter when start/stop button is pressed" + triggerErrorPin = "This pin is used for debugging - snap a logic analyzer on it and see if it's ever high" + lambdaProtectionTimeout = "Only respond once lambda is out of range for this period of time. Use to avoid transients triggering lambda protection when not needed" + scriptSetting1 = "scriptSetting 1" + scriptSetting2 = "scriptSetting 2" + scriptSetting3 = "scriptSetting 3" + scriptSetting4 = "scriptSetting 4" + scriptSetting5 = "scriptSetting 5" + scriptSetting6 = "scriptSetting 6" + scriptSetting7 = "scriptSetting 7" + scriptSetting8 = "scriptSetting 8" + cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" + sensorChartMode = "rusEFI console Sensor Sniffer mode" + useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" + enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." + stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." + verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" + invertCamVVTSignal = "get invertCamVVTSignal" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." + useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" + verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" + etbIo1_controlPin = "Acts as EN pin in two-wire mode" + etbIo2_controlPin = "Acts as EN pin in two-wire mode" + boostControlPin = "Wastegate control Solenoid" + boostPid_offset = "Linear addition to PID logic" + boostPid_periodMs = "PID dTime" + boostPid_minValue = "Output Min Duty Cycle" + boostPid_maxValue = "Output Max Duty Cycle" + launchSpeedThreshold = "Launch disabled above this speed if setting is above zero" + launchTimingRpmRange = "Range from Launch RPM for Timing Retard to activate" + launchFuelAdded = "Extra Fuel Added" + launchBoostDuty = "Duty Cycle for the Boost Solenoid" + hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxOverrunLoad = "Below this engine load, the overrun region is active" + stft_minPowerLoad = "Above this engine load, the power region is active" + stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." + stft_minClt = "Below this temperature, correction is disabled." + stft_minAfr = "Below this AFR, correction is paused" + stft_maxAfr = "Above this AFR, correction is paused" + stft_startupDelay = "Delay after starting the engine before beginning closed loop correction." + stft_cellCfgs1_timeConstant = "Time constant for correction while in this cell: this sets responsiveness of the closed loop correction. A value of 5.0 means it will try to make most of the correction within 5 seconds, and a value of 1.0 will try to correct within 1 second." + stft_cellCfgs2_timeConstant = "Time constant for correction while in this cell: this sets responsiveness of the closed loop correction. A value of 5.0 means it will try to make most of the correction within 5 seconds, and a value of 1.0 will try to correct within 1 second." + stft_cellCfgs3_timeConstant = "Time constant for correction while in this cell: this sets responsiveness of the closed loop correction. A value of 5.0 means it will try to make most of the correction within 5 seconds, and a value of 1.0 will try to correct within 1 second." + stft_cellCfgs4_timeConstant = "Time constant for correction while in this cell: this sets responsiveness of the closed loop correction. A value of 5.0 means it will try to make most of the correction within 5 seconds, and a value of 1.0 will try to correct within 1 second." + stepperDcIo1_controlPin = "Acts as EN pin in two-wire mode" + stepperDcIo2_controlPin = "Acts as EN pin in two-wire mode" + engineMake = "For example, BMW, GM or Chevrolet\nREQUIRED for rusEFI Online" + engineCode = "For example, LS1 or NB2\nREQUIRED for rusEFI Online" + vehicleName = "For example, Hunchback or Orange Miata\nVehicle name has to be unique between your vehicles.\nREQUIRED for rusEFI Online" + tcu_solenoid1 = "tcu_solenoid 1" + tcu_solenoid2 = "tcu_solenoid 2" + tcu_solenoid3 = "tcu_solenoid 3" + tcu_solenoid4 = "tcu_solenoid 4" + tcu_solenoid5 = "tcu_solenoid 5" + tcu_solenoid6 = "tcu_solenoid 6" + etbFunctions1 = "etbFunctions 1" + etbFunctions2 = "etbFunctions 2" + luaOutputPins1 = "luaOutputPins 1" + luaOutputPins2 = "luaOutputPins 2" + luaOutputPins3 = "luaOutputPins 3" + luaOutputPins4 = "luaOutputPins 4" + luaOutputPins5 = "luaOutputPins 5" + luaOutputPins6 = "luaOutputPins 6" + luaOutputPins7 = "luaOutputPins 7" + luaOutputPins8 = "luaOutputPins 8" + vvtOffsets1 = "Angle between cam sensor and VVT zero position\nset vvt_offset X 1" + vvtOffsets2 = "Angle between cam sensor and VVT zero position\nset vvt_offset X 2" + vvtOffsets3 = "Angle between cam sensor and VVT zero position\nset vvt_offset X 3" + vvtOffsets4 = "Angle between cam sensor and VVT zero position\nset vvt_offset X 4" + gpPwmNote1 = "gpPwmNote 1" + gpPwmNote2 = "gpPwmNote 2" + gpPwmNote3 = "gpPwmNote 3" + gpPwmNote4 = "gpPwmNote 4" + widebandOnSecondBus = "Select which bus the wideband controller is attached to." + fuelClosedLoopCorrectionEnabled = "Enables lambda sensor closed loop feedback for fuelling." + silentTriggerError = "Sometimes we have a performance issue while printing error" + canReadEnabled = "enable can_read/disable can_read" + canWriteEnabled = "enable can_write/disable can_write. See also can1ListenMode" + tachPulseDurationAsDutyCycle = "Treat milliseconds value as duty cycle value, i.e. 0.5ms would become 50%" + isAlternatorControlEnabled = "This enables smart alternator control and activates the extra alternator settings." + invertPrimaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the primary engine speed sensor." + invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor." + cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer." + launchSparkCutEnable = "This is the Cut Mode normally used" + verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?" + skippedWheelOnCam = "Where is your primary skipped wheel located?" + acSwitch = "A/C button input" + etbNeutralPosition = "Expected neutral position" + idleMode = "See also idleRpmPid" + isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders." + complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?" + alwaysInstantRpm = "RPM is measured based on last 720 degrees while instant RPM is measured based on the last 90 degrees of crank revolution" + overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position." + useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed." + useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling." + verboseTriggerSynchDetails = "Verbose info in console below engineSnifferRpmThreshold\nenable trigger_details" + isManualSpinningMode = "Usually if we have no trigger events that means engine is stopped\nUnless we are troubleshooting and spinning the engine by hand - this case a longer\ndelay is needed" + twoWireBatchIgnition = "This is needed if your coils are individually wired (COP) and you wish to use batch ignition (Wasted Spark)." + useSeparateAdvanceForCranking = "In Constant mode, timing is automatically tapered to running as RPM increases.\nIn Table mode, the "Cranking ignition advance" table is used directly." + useAdvanceCorrectionsForCranking = "This enables the various ignition corrections during cranking (IAT, CLT, FSIO and PID idle).\nYou probably don't need this." + flexCranking = "Enable a second cranking table to use for E100 flex fuel, interpolating between the two based on flex fuel sensor." + useIacPidMultTable = "This flag allows to use a special 'PID Multiplier' table (0.0-1.0) to compensate for nonlinear nature of IAC-RPM controller" + launchSmoothRetard = "Interpolates the Ignition Retard from 0 to 100% within the RPM Range" + isPhaseSyncRequiredForIgnition = "Some engines are OK running semi-random sequential while other engine require phase synchronization" + useCltBasedRpmLimit = "If enabled, use a curve for RPM limit (based on coolant temperature) instead of a constant value." + forceO2Heating = "If enabled, don't wait for engine start to heat O2 sensors. WARNING: this will reduce the life of your sensor, as condensation in the exhaust from a cold start can crack the sensing element." + invertVvtControlIntake = "If increased VVT duty cycle increases the indicated VVT angle, set this to 'advance'. If it decreases, set this to 'retard'. Most intake cams use 'advance', and most exhaust cams use 'retard'." + invertVvtControlExhaust = "If increased VVT duty cycle increases the indicated VVT angle, set this to 'advance'. If it decreases, set this to 'retard'. Most intake cams use 'advance', and most exhaust cams use 'retard'." + sdTriggerLog = "'Trigger' mode will write a high speed log of trigger events (warning: uses lots of space!). 'Normal' mode will write a standard MLG of sensors, engine function, etc. similar to the one captured in TunerStudio." + camInputsDebug1 = "camInputsDebug 1" + camInputsDebug2 = "camInputsDebug 2" + camInputsDebug3 = "camInputsDebug 3" + camInputsDebug4 = "camInputsDebug 4" + acIdleRpmTarget = "Idle target speed when A/C is enabled. Some cars need the extra speed to keep the AC efficient while idling." + warningPeriod = "set warningPeriod X" + noAccelAfterHardLimitPeriodSecs = "TODO: finish this #413" + mapAveragingSchedulingAtIndex = "At what trigger index should some MAP-related math be executed? This is a performance trick to reduce load on synchronization trigger callback." + tachPulseDuractionMs = "Duration in ms or duty cycle depending on selected mode" + wwaeTau = "Length of time the deposited wall fuel takes to dissipate after the start of acceleration." + alternatorControl_offset = "Linear addition to PID logic" + alternatorControl_periodMs = "PID dTime" + alternatorControl_minValue = "Output Min Duty Cycle" + alternatorControl_maxValue = "Output Max Duty Cycle" + etb_offset = "Linear addition to PID logic" + etb_periodMs = "PID dTime" + etb_minValue = "Output Min Duty Cycle" + etb_maxValue = "Output Max Duty Cycle" + triggerInputDebugPins1 = "triggerInputDebugPins 1" + triggerInputDebugPins2 = "triggerInputDebugPins 2" + airTaperRpmRange = "RPM range above upper limit for extra air taper" + tps2Min = "Closed throttle#2. todo: extract these two fields into a structure\nSee also tps2_1AdcChannel\nset tps2_min X" + tps2Max = "Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\nSee also tps1_1AdcChannel\nset tps2_max X" + starterControlPin = "See also startStopButtonPin" + mapErrorDetectionTooLow = "kPa value which is too low to be true" + mapErrorDetectionTooHigh = "kPa value which is too high to be true" + multisparkSparkDuration = "How long to wait for the spark to fire before recharging the coil for another spark." + multisparkDwell = "This sets the dwell time for subsequent sparks. The main spark's dwell is set by the dwell table." + idleRpmPid_offset = "Linear addition to PID logic" + idleRpmPid_periodMs = "PID dTime" + idleRpmPid_minValue = "Output Min Duty Cycle" + idleRpmPid_maxValue = "Output Max Duty Cycle" + wwaeBeta = "0 = No fuel settling on port walls 1 = All the fuel settling on port walls setting this to 0 disables the wall wetting enrichment." + binarySerialTxPin = "See also EFI_CONSOLE_RX_BRAIN_PIN" + auxValves1 = "auxValves 1" + auxValves2 = "auxValves 2" + throttlePedalWOTVoltage = "Pedal in the floor" + startUpFuelPumpDuration = "on IGN voltage detection turn fuel pump on to build fuel pressure" + idlePidRpmDeadZone = "If the RPM closer to target than this value, disable closed loop idle correction to prevent oscillation" + targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." + auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" + auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" + tpsAccelLookback = "How long to look back for TPS-based acceleration enrichment. Increasing this time will trigger enrichment for longer when a throttle position change occurs." + coastingFuelCutVssLow = "Below this speed, disable DFCO. Use this to prevent jerkiness from fuel enable/disable in low gears." + coastingFuelCutVssHigh = "Above this speed, allow DFCO. Use this to prevent jerkiness from fuel enable/disable in low gears." + noFuelTrimAfterDfcoTime = "Pause closed loop fueling after deceleration fuel cut occurs. Set this to a little longer than however long is required for normal fueling behavior to resume after fuel cut." + tpsAccelEnrichmentThreshold = "Maximum change delta of TPS percentage over the 'length'. Actual TPS change has to be above this value in order for TPS/TPS acceleration to kick in." + auxSpeedSensorInputPin1 = "auxSpeedSensorInputPin 1" + auxSpeedSensorInputPin2 = "auxSpeedSensorInputPin 2" + injectionTimingMode = "Sets what part of injection's is controlled by the injection phase table." + debugMode = "See http://rusefi.com/s/debugmode" + fan1ExtraIdle = "Additional idle % when fan #1 is active" + uartConsoleSerialSpeed = "Band rate for primary TTL" + tpsDecelEnleanmentThreshold = "For decel we simply multiply delta of TPS and tFor decel we do not use table?!" + tpsDecelEnleanmentMultiplier = "Magic multiplier, we multiply delta of TPS and get fuel squirt duration" + throttlePedalSecondaryWOTVoltage = "Pedal in the floor" + canBaudRate = "set can_baudrate" + veOverrideMode = "Override the Y axis (load) value used for the VE table.\nAdvanced users only: If you aren't sure you need this, you probably don't need this." + afrOverrideMode = "Override the Y axis (load) value used for the AFR table.\nAdvanced users only: If you aren't sure you need this, you probably don't need this." + mc33_hpfp_i_hold_off = "How long to deactivate power when hold current is reached before applying power again" + mc33_hpfp_max_hold = "Maximum amount of time the solenoid can be active before assuming a programming error" + stepperDcInvertedPins = "Enable if DC-motor driver (H-bridge) inverts the signals (eg. RZ7899 on Hellen boards)" + canOpenBLT = "Allow OpenBLT on Primary CAN" + can2OpenBLT = "Allow OpenBLT on Secondary CAN" + injectorFlowAsMassFlow = "Select whether to configure injector flow in volumetric flow (defualt, cc/min) or mass flow (g/s)." + can1ListenMode = "ListenMode is about acknowledging CAN traffic on the protocol level. Different from canWriteEnabled" + benchTestOnTime = "Duration of each test pulse" + can2TxPin = "set_can2_tx_pin X" + can2RxPin = "set_can2_rx_pin X" + ignOverrideMode = "Override the Y axis (load) value used for the ignition table.\nAdvanced users only: If you aren't sure you need this, you probably don't need this." + injectorPressureType = "Select which fuel pressure sensor measures the pressure of the fuel at your injectors." + boostCutPressure = "MAP value above which fuel is cut in case of overboost.\nSet to 0 to disable overboost cut." + fixedTiming = "Fixed timing, useful for TDC testing" + mapLowValueVoltage = "MAP voltage for low point" + mapHighValueVoltage = "MAP voltage for low point" + egoValueShift = "EGO value correction" + vvtPins1 = "VVT output solenoid pin for this cam 1" + vvtPins2 = "VVT output solenoid pin for this cam 2" + vvtPins3 = "VVT output solenoid pin for this cam 3" + vvtPins4 = "VVT output solenoid pin for this cam 4" + crankingIACposition = "This is the IAC position during cranking, some engines start better if given more air during cranking to improve cylinder filling." + minimumIgnitionTiming = "Minimim timing advance allowed. No spark on any cylinder will ever fire after this angle BTDC. For example, setting -10 here means no spark ever fires later than 10 deg ATDC. Note that this only concerns the primary spark: any trailing sparks or multispark may violate this constraint." + maximumIgnitionTiming = "Maximum timing advance allowed. No spark on any cylinder will ever fire before this angle BTDC. For example, setting 45 here means no spark ever fires earlier than 45 deg BTDC" + vvtMode1 = "set vvt_mode X 1" + vvtMode2 = "set vvt_mode X 2" + fan2ExtraIdle = "Additional idle % when fan #2 is active" + primingDelay = "Delay to allow fuel pressure to build before firing the priming pulse." + auxAnalogInputs1 = "auxAnalogInputs 1" + auxAnalogInputs2 = "auxAnalogInputs 2" + auxAnalogInputs3 = "auxAnalogInputs 3" + auxAnalogInputs4 = "auxAnalogInputs 4" + auxAnalogInputs5 = "auxAnalogInputs 5" + auxAnalogInputs6 = "auxAnalogInputs 6" + auxAnalogInputs7 = "auxAnalogInputs 7" + auxAnalogInputs8 = "auxAnalogInputs 8" + trailingCoilPins1 = "trailingCoilPins 1" + trailingCoilPins2 = "trailingCoilPins 2" + trailingCoilPins3 = "trailingCoilPins 3" + trailingCoilPins4 = "trailingCoilPins 4" + trailingCoilPins5 = "trailingCoilPins 5" + trailingCoilPins6 = "trailingCoilPins 6" + trailingCoilPins7 = "trailingCoilPins 7" + trailingCoilPins8 = "trailingCoilPins 8" + trailingCoilPins9 = "trailingCoilPins 9" + trailingCoilPins10 = "trailingCoilPins 10" + trailingCoilPins11 = "trailingCoilPins 11" + trailingCoilPins12 = "trailingCoilPins 12" + injectorCompensationMode = "None = I have a MAP-referenced fuel pressure regulator\nFixed rail pressure = I have an atmosphere-referenced fuel pressure regulator (returnless, typically)\nSensed rail pressure = I have a fuel pressure sensor" + fuelReferencePressure = "This is the pressure at which your injector flow is known.\nFor example if your injectors flow 400cc/min at 3.5 bar, enter 350kpa here." + auxTempSensor1_tempC_1 = "these values are in Celcius" + auxTempSensor1_bias_resistor = "Pull-up resistor value on your board" + auxTempSensor2_tempC_1 = "these values are in Celcius" + auxTempSensor2_bias_resistor = "Pull-up resistor value on your board" + etbWastegatePid_offset = "Linear addition to PID logic" + etbWastegatePid_periodMs = "PID dTime" + etbWastegatePid_minValue = "Output Min Duty Cycle" + etbWastegatePid_maxValue = "Output Max Duty Cycle" + stepperNumMicroSteps = "For micro-stepping, make sure that PWM frequency (etbFreq) is high enough" + stepperMinDutyCycle = "Use to limit the current when the stepper motor is idle, not moving (100% = no limit)" + stepperMaxDutyCycle = "Use to limit the max.current through the stepper motor (100% = no limit)" + timing_offset_cylinder1 = "per-cylinder timing correction 1" + timing_offset_cylinder2 = "per-cylinder timing correction 2" + timing_offset_cylinder3 = "per-cylinder timing correction 3" + timing_offset_cylinder4 = "per-cylinder timing correction 4" + timing_offset_cylinder5 = "per-cylinder timing correction 5" + timing_offset_cylinder6 = "per-cylinder timing correction 6" + timing_offset_cylinder7 = "per-cylinder timing correction 7" + timing_offset_cylinder8 = "per-cylinder timing correction 8" + timing_offset_cylinder9 = "per-cylinder timing correction 9" + timing_offset_cylinder10 = "per-cylinder timing correction 10" + timing_offset_cylinder11 = "per-cylinder timing correction 11" + timing_offset_cylinder12 = "per-cylinder timing correction 12" + spi1MosiMode = "Modes count be used for 3v<>5v integration using pull-ups/pull-downs etc." + mc33816_rstb = "ResetB" + brakePedalPin = "Brake pedal switch" + auxPid1_offset = "Linear addition to PID logic" + auxPid1_periodMs = "PID dTime" + auxPid1_minValue = "Output Min Duty Cycle" + auxPid1_maxValue = "Output Max Duty Cycle" + auxPid2_offset = "Linear addition to PID logic" + auxPid2_periodMs = "PID dTime" + auxPid2_minValue = "Output Min Duty Cycle" + auxPid2_maxValue = "Output Max Duty Cycle" + injectorCorrectionPolynomial1 = "injectorCorrectionPolynomial 1" + injectorCorrectionPolynomial2 = "injectorCorrectionPolynomial 2" + injectorCorrectionPolynomial3 = "injectorCorrectionPolynomial 3" + injectorCorrectionPolynomial4 = "injectorCorrectionPolynomial 4" + injectorCorrectionPolynomial5 = "injectorCorrectionPolynomial 5" + injectorCorrectionPolynomial6 = "injectorCorrectionPolynomial 6" + injectorCorrectionPolynomial7 = "injectorCorrectionPolynomial 7" + injectorCorrectionPolynomial8 = "injectorCorrectionPolynomial 8" + fan2OnTemperature = "Cooling fan turn-on temperature threshold, in Celsius" + fan2OffTemperature = "Cooling fan turn-off temperature threshold, in Celsius" + sentInputPins1 = "sentInputPins 1" + etbJamTimeout = "Time required to detect a stuck throttle." + etbExpAverageLength = "By the way ETB PID runs at 500hz, length in 1/500 of second here." + coastingFuelCutRpmHigh = "This sets the RPM above which fuel cut is active." + coastingFuelCutRpmLow = "This sets the RPM below which fuel cut is deactivated, this prevents jerking or issues transitioning to idle" + coastingFuelCutTps = "Throttle position below which fuel cut is active. With an electronic throttle enabled, this checks against pedal position." + coastingFuelCutClt = "Fuel cutoff is disabled when the engine is cold." + pidExtraForLowRpm = "Increases PID reaction for RPM , 50, , true + + filter = VBatt, "VBatt", VBatt < , 12, , true + + filter = minTps, "Minimum TPS", TPSValue, < , 1, , true + + +; +; in order to add new TunerStudio data point you need to change one of *.txt files mentioned in LiveData.yaml +; +[OutputChannels] + + ochGetCommand = "O%2o%2c" + +; see TS_OUTPUT_SIZE in console source code + ochBlockSize = 1440 + +; 11.2.3 Full Optimized – High Speed + scatteredOchGetCommand = 9 + scatteredOffsetArray = highSpeedOffsets + scatteredGetEnabled = { 0 } + +; +; see TunerStudioOutputChannels struct +; + +sd_present = bits, U32, 0, [0:0] +sd_logging_internal = bits, U32, 0, [1:1] +triggerScopeReady = bits, U32, 0, [2:2] +antilagTriggered = bits, U32, 0, [3:3] +isFanOn = bits, U32, 0, [4:4] +isO2HeaterOn = bits, U32, 0, [5:5] +checkEngine = bits, U32, 0, [6:6] +needBurn = bits, U32, 0, [7:7] +sd_msd = bits, U32, 0, [8:8] +isFan2On = bits, U32, 0, [9:9] +acrActive = bits, U32, 0, [10:10] +toothLogReady = bits, U32, 0, [11:11] +isTpsError = bits, U32, 0, [12:12] +isCltError = bits, U32, 0, [13:13] +isMapError = bits, U32, 0, [14:14] +isIatError = bits, U32, 0, [15:15] +isTriggerError = bits, U32, 0, [16:16] +hasCriticalError = bits, U32, 0, [17:17] +isWarnNow = bits, U32, 0, [18:18] +isPedalError = bits, U32, 0, [19:19] +isKnockChipOk = bits, U32, 0, [20:20] +launchTriggered = bits, U32, 0, [21:21] +isTps2Error = bits, U32, 0, [22:22] +injectorFault = bits, U32, 0, [23:23] +ignitionFault = bits, U32, 0, [24:24] +isMainRelayOn = bits, U32, 0, [25:25] +isUsbConnected = bits, U32, 0, [26:26] +dfcoActive = bits, U32, 0, [27:27] +RPMValue = scalar, U16, 4, "RPM", 1, 0 +rpmAcceleration = scalar, S16, 6, "RPM acceleration", 1, 0 +speedToRpmRatio = scalar, U16, 8, "value", 0.01, 0 +unusedVehicleSpeedKph = scalar, U08, 10, "kph", 1, 0 +internalMcuTemperature = scalar, S08, 11, "deg C", 1, 0 +coolant = scalar, S16, 12, "deg C", 0.01, 0 +intake = scalar, S16, 14, "deg C", 0.01, 0 +auxTemp1 = scalar, S16, 16, "deg C", 0.01, 0 +auxTemp2 = scalar, S16, 18, "deg C", 0.01, 0 +TPSValue = scalar, S16, 20, "%", 0.01, 0 +throttlePedalPosition = scalar, S16, 22, "%", 0.01, 0 +tpsADC = scalar, U16, 24, "ADC", 1, 0 +rawMaf = scalar, U16, 26, "V", 0.001, 0 +mafMeasured = scalar, U16, 28, "kg/h", 0.1, 0 +MAPValue = scalar, U16, 30, "kPa", 0.03333333333333333, 0 +baroPressure = scalar, U16, 32, "kPa", 0.03333333333333333, 0 +lambdaValue = scalar, U16, 34, "", 1.0E-4, 0 +VBatt = scalar, U16, 36, "V", 0.001, 0 +oilPressure = scalar, U16, 38, "kPa", 0.03333333333333333, 0 +vvtPositionB1I = scalar, S16, 40, "deg", 0.02, 0 +actualLastInjection = scalar, U16, 42, "ms", 0.0033333333333333335, 0 +injectorDutyCycle = scalar, U08, 44, "%", 0.5, 0 +veValue = scalar, U08, 45, "ratio", 0.5, 0 +injectionOffset = scalar, S16, 46, "deg", 1, 0 +engineMakeCodeNameCrc16 = scalar, U16, 48, "crc16", 1, 0 +wallFuelAmount = scalar, U16, 50, "mg", 0.01, 0 +wallFuelCorrectionValue = scalar, S16, 52, "mg", 0.01, 0 +revolutionCounterSinceStart = scalar, U16, 54, "", 1, 0 +canReadCounter = scalar, U16, 56, "", 1, 0 +tpsAccelFuel = scalar, S16, 58, "ms", 0.0033333333333333335, 0 +currentIgnitionMode = scalar, U08, 60, "", 1, 0 +currentInjectionMode = scalar, U08, 61, "", 1, 0 +coilDutyCycle = scalar, U16, 62, "%", 0.01, 0 +etbTarget = scalar, S16, 64, "%", 0.01, 0 +etb1DutyCycle = scalar, S16, 66, "%", 0.01, 0 +fuelTankLevel = scalar, S16, 68, "%", 0.01, 0 +totalFuelConsumption = scalar, U16, 70, "grams", 1, 0 +fuelFlowRate = scalar, U16, 72, "gram/s", 0.005, 0 +TPS2Value = scalar, S16, 74, "%", 0.01, 0 +tuneCrc16 = scalar, U16, 76, "crc16", 1, 0 +seconds = scalar, U32, 80, "sec", 1, 0 +engineMode = scalar, U32, 84, "em", 1, 0 +firmwareVersion = scalar, U32, 88, "version_f", 1, 0 +rawIdlePositionSensor = scalar, S16, 92, "V", 0.001, 0 +rawWastegatePosition = scalar, S16, 94, "V", 0.001, 0 +accelerationLat = scalar, S16, 96, "G", 0.001, 0 +accelerationLon = scalar, S16, 98, "G", 0.001, 0 +detectedGear = scalar, U08, 100, "", 1, 0 +maxTriggerReentrant = scalar, U08, 101, "", 1, 0 +rawLowFuelPressure = scalar, S16, 102, "V", 0.001, 0 +rawHighFuelPressure = scalar, S16, 104, "V", 0.001, 0 +lowFuelPressure = scalar, S16, 106, "kpa", 0.03333333333333333, 0 +tcuDesiredGear = scalar, S08, 108, "gear", 1, 0 +flexPercent = scalar, U08, 109, "%", 0.5, 0 +wastegatePositionSensor = scalar, S16, 110, "%", 0.01, 0 +highFuelPressure = scalar, S16, 112, "bar", 0.1, 0 +calibrationValue = scalar, F32, 116, "", 1, 0 +calibrationMode = scalar, U08, 120, "", 1, 0 +idleStepperTargetPosition = scalar, U08, 121, "", 1, 0 +tsConfigVersion = scalar, U32, 124, "", 1, 0 +totalTriggerErrorCounter = scalar, U32, 128, "counter", 1, 0 +orderingErrorCounter = scalar, U32, 132, "", 1, 0 +warningCounter = scalar, U16, 136, "count", 1, 0 +lastErrorCode = scalar, U16, 138, "error", 1, 0 +recentErrorCode1 = scalar, U16, 140, "error", 1, 0 +recentErrorCode2 = scalar, U16, 142, "error", 1, 0 +recentErrorCode3 = scalar, U16, 144, "error", 1, 0 +recentErrorCode4 = scalar, U16, 146, "error", 1, 0 +recentErrorCode5 = scalar, U16, 148, "error", 1, 0 +recentErrorCode6 = scalar, U16, 150, "error", 1, 0 +recentErrorCode7 = scalar, U16, 152, "error", 1, 0 +recentErrorCode8 = scalar, U16, 154, "error", 1, 0 +debugFloatField1 = scalar, F32, 156, "val", 1, 0 +debugFloatField2 = scalar, F32, 160, "val", 1, 0 +debugFloatField3 = scalar, F32, 164, "val", 1, 0 +debugFloatField4 = scalar, F32, 168, "val", 1, 0 +debugFloatField5 = scalar, F32, 172, "val", 1, 0 +debugFloatField6 = scalar, F32, 176, "val", 1, 0 +debugFloatField7 = scalar, F32, 180, "val", 1, 0 +debugIntField1 = scalar, U32, 184, "val", 1, 0 +debugIntField2 = scalar, U32, 188, "val", 1, 0 +debugIntField3 = scalar, U32, 192, "val", 1, 0 +debugIntField4 = scalar, S16, 196, "val", 1, 0 +debugIntField5 = scalar, S16, 198, "val", 1, 0 +egt1 = scalar, U16, 200, "deg C", 1, 0 +egt2 = scalar, U16, 202, "deg C", 1, 0 +egt3 = scalar, U16, 204, "deg C", 1, 0 +egt4 = scalar, U16, 206, "deg C", 1, 0 +egt5 = scalar, U16, 208, "deg C", 1, 0 +egt6 = scalar, U16, 210, "deg C", 1, 0 +egt7 = scalar, U16, 212, "deg C", 1, 0 +egt8 = scalar, U16, 214, "deg C", 1, 0 +rawTps1Primary = scalar, S16, 216, "V", 0.001, 0 +rawPpsPrimary = scalar, S16, 218, "V", 0.001, 0 +rawClt = scalar, S16, 220, "V", 0.001, 0 +rawIat = scalar, S16, 222, "V", 0.001, 0 +rawOilPressure = scalar, S16, 224, "V", 0.001, 0 +fuelClosedLoopBinIdx = scalar, U08, 226, "", 1, 0 +tcuCurrentGear = scalar, S08, 227, "gear", 1, 0 +rawPpsSecondary = scalar, S16, 228, "V", 0.001, 0 +idlePositionSensor = scalar, S16, 230, "%", 0.01, 0 +AFRValue = scalar, U16, 232, "AFR", 0.001, 0 +VssAcceleration = scalar, U16, 234, "m/s2", 0.0033333333333333335, 0 +lambdaValue2 = scalar, U16, 236, "", 1.0E-4, 0 +AFRValue2 = scalar, U16, 238, "AFR", 0.001, 0 +vvtPositionB1E = scalar, S16, 240, "deg", 0.02, 0 +vvtPositionB2I = scalar, S16, 242, "deg", 0.02, 0 +vvtPositionB2E = scalar, S16, 244, "deg", 0.02, 0 +fuelPidCorrection1 = scalar, S16, 246, "%", 0.01, 0 +fuelPidCorrection2 = scalar, S16, 248, "%", 0.01, 0 +rawTps1Secondary = scalar, S16, 250, "V", 0.001, 0 +rawTps2Primary = scalar, S16, 252, "V", 0.001, 0 +rawTps2Secondary = scalar, S16, 254, "V", 0.001, 0 +accelerationVert = scalar, S16, 256, "G", 0.001, 0 +gyroYaw = scalar, S16, 258, "deg/sec", 0.001, 0 +vvtTargets1 = scalar, S08, 260, "deg", 1, 0 +vvtTargets2 = scalar, S08, 261, "deg", 1, 0 +vvtTargets3 = scalar, S08, 262, "deg", 1, 0 +vvtTargets4 = scalar, S08, 263, "deg", 1, 0 +turboSpeed = scalar, U16, 264, "hz", 1, 0 +ignitionAdvanceCyl1 = scalar, S16, 266, "deg", 0.02, 0 +ignitionAdvanceCyl2 = scalar, S16, 268, "deg", 0.02, 0 +ignitionAdvanceCyl3 = scalar, S16, 270, "deg", 0.02, 0 +ignitionAdvanceCyl4 = scalar, S16, 272, "deg", 0.02, 0 +ignitionAdvanceCyl5 = scalar, S16, 274, "deg", 0.02, 0 +ignitionAdvanceCyl6 = scalar, S16, 276, "deg", 0.02, 0 +ignitionAdvanceCyl7 = scalar, S16, 278, "deg", 0.02, 0 +ignitionAdvanceCyl8 = scalar, S16, 280, "deg", 0.02, 0 +ignitionAdvanceCyl9 = scalar, S16, 282, "deg", 0.02, 0 +ignitionAdvanceCyl10 = scalar, S16, 284, "deg", 0.02, 0 +ignitionAdvanceCyl11 = scalar, S16, 286, "deg", 0.02, 0 +ignitionAdvanceCyl12 = scalar, S16, 288, "deg", 0.02, 0 +tps1Split = scalar, S16, 290, "%", 0.01, 0 +tps2Split = scalar, S16, 292, "%", 0.01, 0 +tps12Split = scalar, S16, 294, "%", 0.01, 0 +accPedalSplit = scalar, S16, 296, "%", 0.01, 0 +sparkCutReason = scalar, S08, 298, "code", 1, 0 +fuelCutReason = scalar, S08, 299, "code", 1, 0 +mafEstimate = scalar, U16, 300, "kg/h", 0.1, 0 +instantRpm = scalar, U16, 302, "rpm", 1, 0 +rawMap = scalar, U16, 304, "V", 0.001, 0 +rawAfr = scalar, U16, 306, "V", 0.001, 0 +calibrationValue2 = scalar, F32, 308, "", 1, 0 +luaInvocationCounter = scalar, U32, 312, "count", 1, 0 +luaLastCycleDuration = scalar, U32, 316, "nt", 1, 0 +tcu_currentRange = scalar, U08, 320, "", 1, 0 +tcRatio = scalar, U16, 322, "value", 0.01, 0 +lastShiftTime = scalar, F32, 324, "", 1, 0 +vssEdgeCounter = scalar, U32, 328, "", 1, 0 +issEdgeCounter = scalar, U32, 332, "", 1, 0 +auxLinear1 = scalar, S16, 336, "", 0.01, 0 +auxLinear2 = scalar, S16, 338, "", 0.01, 0 +fallbackMap = scalar, U16, 340, "kPa", 0.1, 0 +instantMAPValue = scalar, U16, 342, "kPa", 0.03333333333333333, 0 +maxLockedDuration = scalar, U16, 344, "us", 1, 0 +canWriteOk = scalar, U16, 346, "", 1, 0 +canWriteNotOk = scalar, U16, 348, "", 1, 0 +triggerPrimaryFall = scalar, U32, 352, "", 1, 0 +triggerPrimaryRise = scalar, U32, 356, "", 1, 0 +triggerSecondaryFall = scalar, U32, 360, "", 1, 0 +triggerSecondaryRise = scalar, U32, 364, "", 1, 0 +triggerVvtFall = scalar, U16, 368, "", 1, 0 +triggerVvtRise = scalar, U16, 370, "", 1, 0 +triggerVvt2Fall = scalar, U16, 372, "", 1, 0 +triggerVvt2Rise = scalar, U16, 374, "", 1, 0 +starterState = scalar, U08, 376, "", 1, 0 +starterRelayDisable = scalar, U08, 377, "", 1, 0 +multiSparkCounter = scalar, U08, 378, "", 1, 0 +extiOverflowCount = scalar, U08, 379, "", 1, 0 +alternatorStatus_pTerm = scalar, F32, 380, "", 1, 0 +alternatorStatus_iTerm = scalar, S16, 384, "", 0.01, 0 +alternatorStatus_dTerm = scalar, S16, 386, "", 0.01, 0 +alternatorStatus_output = scalar, S16, 388, "", 0.01, 0 +alternatorStatus_error = scalar, S16, 390, "", 0.01, 0 +alternatorStatus_resetCounter = scalar, U32, 392, "", 1, 0 +idleStatus_pTerm = scalar, F32, 396, "", 1, 0 +idleStatus_iTerm = scalar, S16, 400, "", 0.01, 0 +idleStatus_dTerm = scalar, S16, 402, "", 0.01, 0 +idleStatus_output = scalar, S16, 404, "", 0.01, 0 +idleStatus_error = scalar, S16, 406, "", 0.01, 0 +idleStatus_resetCounter = scalar, U32, 408, "", 1, 0 +etbStatus_pTerm = scalar, F32, 412, "", 1, 0 +etbStatus_iTerm = scalar, S16, 416, "", 0.01, 0 +etbStatus_dTerm = scalar, S16, 418, "", 0.01, 0 +etbStatus_output = scalar, S16, 420, "", 0.01, 0 +etbStatus_error = scalar, S16, 422, "", 0.01, 0 +etbStatus_resetCounter = scalar, U32, 424, "", 1, 0 +boostStatus_pTerm = scalar, F32, 428, "", 1, 0 +boostStatus_iTerm = scalar, S16, 432, "", 0.01, 0 +boostStatus_dTerm = scalar, S16, 434, "", 0.01, 0 +boostStatus_output = scalar, S16, 436, "", 0.01, 0 +boostStatus_error = scalar, S16, 438, "", 0.01, 0 +boostStatus_resetCounter = scalar, U32, 440, "", 1, 0 +wastegateDcStatus_pTerm = scalar, F32, 444, "", 1, 0 +wastegateDcStatus_iTerm = scalar, S16, 448, "", 0.01, 0 +wastegateDcStatus_dTerm = scalar, S16, 450, "", 0.01, 0 +wastegateDcStatus_output = scalar, S16, 452, "", 0.01, 0 +wastegateDcStatus_error = scalar, S16, 454, "", 0.01, 0 +wastegateDcStatus_resetCounter = scalar, U32, 456, "", 1, 0 +vvtStatus1_pTerm = scalar, F32, 460, "", 1, 0 +vvtStatus1_iTerm = scalar, S16, 464, "", 0.01, 0 +vvtStatus1_dTerm = scalar, S16, 466, "", 0.01, 0 +vvtStatus1_output = scalar, S16, 468, "", 0.01, 0 +vvtStatus1_error = scalar, S16, 470, "", 0.01, 0 +vvtStatus1_resetCounter = scalar, U32, 472, "", 1, 0 +vvtStatus2_pTerm = scalar, F32, 476, "", 1, 0 +vvtStatus2_iTerm = scalar, S16, 480, "", 0.01, 0 +vvtStatus2_dTerm = scalar, S16, 482, "", 0.01, 0 +vvtStatus2_output = scalar, S16, 484, "", 0.01, 0 +vvtStatus2_error = scalar, S16, 486, "", 0.01, 0 +vvtStatus2_resetCounter = scalar, U32, 488, "", 1, 0 +vvtStatus3_pTerm = scalar, F32, 492, "", 1, 0 +vvtStatus3_iTerm = scalar, S16, 496, "", 0.01, 0 +vvtStatus3_dTerm = scalar, S16, 498, "", 0.01, 0 +vvtStatus3_output = scalar, S16, 500, "", 0.01, 0 +vvtStatus3_error = scalar, S16, 502, "", 0.01, 0 +vvtStatus3_resetCounter = scalar, U32, 504, "", 1, 0 +vvtStatus4_pTerm = scalar, F32, 508, "", 1, 0 +vvtStatus4_iTerm = scalar, S16, 512, "", 0.01, 0 +vvtStatus4_dTerm = scalar, S16, 514, "", 0.01, 0 +vvtStatus4_output = scalar, S16, 516, "", 0.01, 0 +vvtStatus4_error = scalar, S16, 518, "", 0.01, 0 +vvtStatus4_resetCounter = scalar, U32, 520, "", 1, 0 +auxSpeed1 = scalar, U16, 524, "s", 1, 0 +auxSpeed2 = scalar, U16, 526, "s", 1, 0 +ISSValue = scalar, U16, 528, "RPM", 1, 0 +rawAnalogInput1 = scalar, S16, 530, "V", 0.001, 0 +rawAnalogInput2 = scalar, S16, 532, "V", 0.001, 0 +rawAnalogInput3 = scalar, S16, 534, "V", 0.001, 0 +rawAnalogInput4 = scalar, S16, 536, "V", 0.001, 0 +rawAnalogInput5 = scalar, S16, 538, "V", 0.001, 0 +rawAnalogInput6 = scalar, S16, 540, "V", 0.001, 0 +rawAnalogInput7 = scalar, S16, 542, "V", 0.001, 0 +rawAnalogInput8 = scalar, S16, 544, "V", 0.001, 0 +gppwmOutput1 = scalar, U08, 546, "%", 0.5, 0 +gppwmOutput2 = scalar, U08, 547, "%", 0.5, 0 +gppwmOutput3 = scalar, U08, 548, "%", 0.5, 0 +gppwmOutput4 = scalar, U08, 549, "%", 0.5, 0 +gppwmXAxis1 = scalar, S16, 550, "", 1, 0 +gppwmXAxis2 = scalar, S16, 552, "", 1, 0 +gppwmXAxis3 = scalar, S16, 554, "", 1, 0 +gppwmXAxis4 = scalar, S16, 556, "", 1, 0 +gppwmYAxis1 = scalar, S16, 558, "", 0.1, 0 +gppwmYAxis2 = scalar, S16, 560, "", 0.1, 0 +gppwmYAxis3 = scalar, S16, 562, "", 0.1, 0 +gppwmYAxis4 = scalar, S16, 564, "", 0.1, 0 +rawBattery = scalar, S16, 566, "V", 0.001, 0 +ignBlendParameter1 = scalar, S16, 568, "", 0.1, 0 +ignBlendParameter2 = scalar, S16, 570, "", 0.1, 0 +ignBlendParameter3 = scalar, S16, 572, "", 0.1, 0 +ignBlendParameter4 = scalar, S16, 574, "", 0.1, 0 +ignBlendBias1 = scalar, U08, 576, "%", 0.5, 0 +ignBlendBias2 = scalar, U08, 577, "%", 0.5, 0 +ignBlendBias3 = scalar, U08, 578, "%", 0.5, 0 +ignBlendBias4 = scalar, U08, 579, "%", 0.5, 0 +ignBlendOutput1 = scalar, S16, 580, "deg", 0.01, 0 +ignBlendOutput2 = scalar, S16, 582, "deg", 0.01, 0 +ignBlendOutput3 = scalar, S16, 584, "deg", 0.01, 0 +ignBlendOutput4 = scalar, S16, 586, "deg", 0.01, 0 +veBlendParameter1 = scalar, S16, 588, "", 0.1, 0 +veBlendParameter2 = scalar, S16, 590, "", 0.1, 0 +veBlendParameter3 = scalar, S16, 592, "", 0.1, 0 +veBlendParameter4 = scalar, S16, 594, "", 0.1, 0 +veBlendBias1 = scalar, U08, 596, "%", 0.5, 0 +veBlendBias2 = scalar, U08, 597, "%", 0.5, 0 +veBlendBias3 = scalar, U08, 598, "%", 0.5, 0 +veBlendBias4 = scalar, U08, 599, "%", 0.5, 0 +veBlendOutput1 = scalar, S16, 600, "%", 0.01, 0 +veBlendOutput2 = scalar, S16, 602, "%", 0.01, 0 +veBlendOutput3 = scalar, S16, 604, "%", 0.01, 0 +veBlendOutput4 = scalar, S16, 606, "%", 0.01, 0 +boostOpenLoopBlendParameter1 = scalar, S16, 608, "", 0.1, 0 +boostOpenLoopBlendParameter2 = scalar, S16, 610, "", 0.1, 0 +boostOpenLoopBlendBias1 = scalar, U08, 612, "%", 0.5, 0 +boostOpenLoopBlendBias2 = scalar, U08, 613, "%", 0.5, 0 +boostOpenLoopBlendOutput1 = scalar, S08, 614, "%", 1, 0 +boostOpenLoopBlendOutput2 = scalar, S08, 615, "%", 1, 0 +boostClosedLoopBlendParameter1 = scalar, S16, 616, "", 0.1, 0 +boostClosedLoopBlendParameter2 = scalar, S16, 618, "", 0.1, 0 +boostClosedLoopBlendBias1 = scalar, U08, 620, "%", 0.5, 0 +boostClosedLoopBlendBias2 = scalar, U08, 621, "%", 0.5, 0 +boostClosedLoopBlendOutput1 = scalar, S16, 622, "%", 0.1, 0 +boostClosedLoopBlendOutput2 = scalar, S16, 624, "%", 0.1, 0 +coilState1 = bits, U32, 628, [0:0] +coilState2 = bits, U32, 628, [1:1] +coilState3 = bits, U32, 628, [2:2] +coilState4 = bits, U32, 628, [3:3] +coilState5 = bits, U32, 628, [4:4] +coilState6 = bits, U32, 628, [5:5] +coilState7 = bits, U32, 628, [6:6] +coilState8 = bits, U32, 628, [7:7] +coilState9 = bits, U32, 628, [8:8] +coilState10 = bits, U32, 628, [9:9] +coilState11 = bits, U32, 628, [10:10] +coilState12 = bits, U32, 628, [11:11] +injectorState1 = bits, U32, 628, [12:12] +injectorState2 = bits, U32, 628, [13:13] +injectorState3 = bits, U32, 628, [14:14] +injectorState4 = bits, U32, 628, [15:15] +injectorState5 = bits, U32, 628, [16:16] +injectorState6 = bits, U32, 628, [17:17] +injectorState7 = bits, U32, 628, [18:18] +injectorState8 = bits, U32, 628, [19:19] +injectorState9 = bits, U32, 628, [20:20] +injectorState10 = bits, U32, 628, [21:21] +injectorState11 = bits, U32, 628, [22:22] +injectorState12 = bits, U32, 628, [23:23] +triggerChannel1 = bits, U32, 628, [24:24] +triggerChannel2 = bits, U32, 628, [25:25] +vvtChannel1 = bits, U32, 628, [26:26] +vvtChannel2 = bits, U32, 628, [27:27] +vvtChannel3 = bits, U32, 628, [28:28] +vvtChannel4 = bits, U32, 628, [29:29] +outputRequestPeriod = scalar, U32, 632, "", 1, 0 +mapFast = scalar, F32, 636, "", 1, 0 +luaGauges1 = scalar, F32, 640, "value", 1, 0 +luaGauges2 = scalar, F32, 644, "value", 1, 0 +rawMaf2 = scalar, U16, 648, "V", 0.001, 0 +mafMeasured2 = scalar, U16, 650, "kg/h", 0.1, 0 +vehicleSpeedKph = scalar, U16, 652, "kph", 0.01, 0 +Gego = scalar, U16, 654, "%", 0.01,0 +testBenchIter = scalar, U16, 656, "count", 1, 0 +oilTemp = scalar, S16, 658, "deg C", 0.01, 0 +fuelTemp = scalar, S16, 660, "deg C", 0.01, 0 +ambientTemp = scalar, S16, 662, "deg C", 0.01, 0 +compressorDischargeTemp = scalar, S16, 664, "deg C", 0.01, 0 +compressorDischargePressure = scalar, U16, 666, "kPa", 0.03333333333333333, 0 +throttleInletPressure = scalar, U16, 668, "kPa", 0.03333333333333333, 0 +ignitionOnTime = scalar, U16, 670, "sec", 1,0 +engineRunTime = scalar, U16, 672, "sec", 1,0 +distanceTraveled = scalar, U16, 674, "km", 0.1,0 +afrGasolineScale = scalar, U16, 676, "AFR", 0.001, 0 +afr2GasolineScale = scalar, U16, 678, "AFR", 0.001, 0 +unusedAtTheEnd1 = scalar, U08, 680, "", 1, 0 +unusedAtTheEnd2 = scalar, U08, 681, "", 1, 0 +unusedAtTheEnd3 = scalar, U08, 682, "", 1, 0 +unusedAtTheEnd4 = scalar, U08, 683, "", 1, 0 +unusedAtTheEnd5 = scalar, U08, 684, "", 1, 0 +unusedAtTheEnd6 = scalar, U08, 685, "", 1, 0 +unusedAtTheEnd7 = scalar, U08, 686, "", 1, 0 +unusedAtTheEnd8 = scalar, U08, 687, "", 1, 0 +unusedAtTheEnd9 = scalar, U08, 688, "", 1, 0 +unusedAtTheEnd10 = scalar, U08, 689, "", 1, 0 +unusedAtTheEnd11 = scalar, U08, 690, "", 1, 0 +unusedAtTheEnd12 = scalar, U08, 691, "", 1, 0 +unusedAtTheEnd13 = scalar, U08, 692, "", 1, 0 +unusedAtTheEnd14 = scalar, U08, 693, "", 1, 0 +unusedAtTheEnd15 = scalar, U08, 694, "", 1, 0 +unusedAtTheEnd16 = scalar, U08, 695, "", 1, 0 +unusedAtTheEnd17 = scalar, U08, 696, "", 1, 0 +unusedAtTheEnd18 = scalar, U08, 697, "", 1, 0 +unusedAtTheEnd19 = scalar, U08, 698, "", 1, 0 +unusedAtTheEnd20 = scalar, U08, 699, "", 1, 0 +unusedAtTheEnd21 = scalar, U08, 700, "", 1, 0 +unusedAtTheEnd22 = scalar, U08, 701, "", 1, 0 +unusedAtTheEnd23 = scalar, U08, 702, "", 1, 0 +unusedAtTheEnd24 = scalar, U08, 703, "", 1, 0 +unusedAtTheEnd25 = scalar, U08, 704, "", 1, 0 +unusedAtTheEnd26 = scalar, U08, 705, "", 1, 0 +unusedAtTheEnd27 = scalar, U08, 706, "", 1, 0 +unusedAtTheEnd28 = scalar, U08, 707, "", 1, 0 +unusedAtTheEnd29 = scalar, U08, 708, "", 1, 0 +unusedAtTheEnd30 = scalar, U08, 709, "", 1, 0 +unusedAtTheEnd31 = scalar, U08, 710, "", 1, 0 +unusedAtTheEnd32 = scalar, U08, 711, "", 1, 0 +unusedAtTheEnd33 = scalar, U08, 712, "", 1, 0 +unusedAtTheEnd34 = scalar, U08, 713, "", 1, 0 +unusedAtTheEnd35 = scalar, U08, 714, "", 1, 0 +unusedAtTheEnd36 = scalar, U08, 715, "", 1, 0 +unusedAtTheEnd37 = scalar, U08, 716, "", 1, 0 +unusedAtTheEnd38 = scalar, U08, 717, "", 1, 0 +unusedAtTheEnd39 = scalar, U08, 718, "", 1, 0 +unusedAtTheEnd40 = scalar, U08, 719, "", 1, 0 +unusedAtTheEnd41 = scalar, U08, 720, "", 1, 0 +unusedAtTheEnd42 = scalar, U08, 721, "", 1, 0 +unusedAtTheEnd43 = scalar, U08, 722, "", 1, 0 +unusedAtTheEnd44 = scalar, U08, 723, "", 1, 0 +unusedAtTheEnd45 = scalar, U08, 724, "", 1, 0 +unusedAtTheEnd46 = scalar, U08, 725, "", 1, 0 +unusedAtTheEnd47 = scalar, U08, 726, "", 1, 0 +unusedAtTheEnd48 = scalar, U08, 727, "", 1, 0 +unusedAtTheEnd49 = scalar, U08, 728, "", 1, 0 +unusedAtTheEnd50 = scalar, U08, 729, "", 1, 0 +unusedAtTheEnd51 = scalar, U08, 730, "", 1, 0 +unusedAtTheEnd52 = scalar, U08, 731, "", 1, 0 +unusedAtTheEnd53 = scalar, U08, 732, "", 1, 0 +unusedAtTheEnd54 = scalar, U08, 733, "", 1, 0 +unusedAtTheEnd55 = scalar, U08, 734, "", 1, 0 +unusedAtTheEnd56 = scalar, U08, 735, "", 1, 0 +unusedAtTheEnd57 = scalar, U08, 736, "", 1, 0 +unusedAtTheEnd58 = scalar, U08, 737, "", 1, 0 +unusedAtTheEnd59 = scalar, U08, 738, "", 1, 0 +unusedAtTheEnd60 = scalar, U08, 739, "", 1, 0 +unusedAtTheEnd61 = scalar, U08, 740, "", 1, 0 +unusedAtTheEnd62 = scalar, U08, 741, "", 1, 0 +unusedAtTheEnd63 = scalar, U08, 742, "", 1, 0 +unusedAtTheEnd64 = scalar, U08, 743, "", 1, 0 +unusedAtTheEnd65 = scalar, U08, 744, "", 1, 0 +unusedAtTheEnd66 = scalar, U08, 745, "", 1, 0 +unusedAtTheEnd67 = scalar, U08, 746, "", 1, 0 +unusedAtTheEnd68 = scalar, U08, 747, "", 1, 0 +unusedAtTheEnd69 = scalar, U08, 748, "", 1, 0 +unusedAtTheEnd70 = scalar, U08, 749, "", 1, 0 +unusedAtTheEnd71 = scalar, U08, 750, "", 1, 0 +unusedAtTheEnd72 = scalar, U08, 751, "", 1, 0 +unusedAtTheEnd73 = scalar, U08, 752, "", 1, 0 +unusedAtTheEnd74 = scalar, U08, 753, "", 1, 0 +unusedAtTheEnd75 = scalar, U08, 754, "", 1, 0 +unusedAtTheEnd76 = scalar, U08, 755, "", 1, 0 +unusedAtTheEnd77 = scalar, U08, 756, "", 1, 0 +unusedAtTheEnd78 = scalar, U08, 757, "", 1, 0 +unusedAtTheEnd79 = scalar, U08, 758, "", 1, 0 +unusedAtTheEnd80 = scalar, U08, 759, "", 1, 0 +unusedAtTheEnd81 = scalar, U08, 760, "", 1, 0 +unusedAtTheEnd82 = scalar, U08, 761, "", 1, 0 +unusedAtTheEnd83 = scalar, U08, 762, "", 1, 0 +unusedAtTheEnd84 = scalar, U08, 763, "", 1, 0 +unusedAtTheEnd85 = scalar, U08, 764, "", 1, 0 +unusedAtTheEnd86 = scalar, U08, 765, "", 1, 0 +unusedAtTheEnd87 = scalar, U08, 766, "", 1, 0 +unusedAtTheEnd88 = scalar, U08, 767, "", 1, 0 +unusedAtTheEnd89 = scalar, U08, 768, "", 1, 0 +unusedAtTheEnd90 = scalar, U08, 769, "", 1, 0 +unusedAtTheEnd91 = scalar, U08, 770, "", 1, 0 +unusedAtTheEnd92 = scalar, U08, 771, "", 1, 0 +unusedAtTheEnd93 = scalar, U08, 772, "", 1, 0 +unusedAtTheEnd94 = scalar, U08, 773, "", 1, 0 +unusedAtTheEnd95 = scalar, U08, 774, "", 1, 0 +unusedAtTheEnd96 = scalar, U08, 775, "", 1, 0 +unusedAtTheEnd97 = scalar, U08, 776, "", 1, 0 +unusedAtTheEnd98 = scalar, U08, 777, "", 1, 0 +unusedAtTheEnd99 = scalar, U08, 778, "", 1, 0 +unusedAtTheEnd100 = scalar, U08, 779, "", 1, 0 +unusedAtTheEnd101 = scalar, U08, 780, "", 1, 0 +unusedAtTheEnd102 = scalar, U08, 781, "", 1, 0 +unusedAtTheEnd103 = scalar, U08, 782, "", 1, 0 +unusedAtTheEnd104 = scalar, U08, 783, "", 1, 0 +unusedAtTheEnd105 = scalar, U08, 784, "", 1, 0 +unusedAtTheEnd106 = scalar, U08, 785, "", 1, 0 +unusedAtTheEnd107 = scalar, U08, 786, "", 1, 0 +unusedAtTheEnd108 = scalar, U08, 787, "", 1, 0 +unusedAtTheEnd109 = scalar, U08, 788, "", 1, 0 +unusedAtTheEnd110 = scalar, U08, 789, "", 1, 0 +unusedAtTheEnd111 = scalar, U08, 790, "", 1, 0 +unusedAtTheEnd112 = scalar, U08, 791, "", 1, 0 +unusedAtTheEnd113 = scalar, U08, 792, "", 1, 0 +unusedAtTheEnd114 = scalar, U08, 793, "", 1, 0 +unusedAtTheEnd115 = scalar, U08, 794, "", 1, 0 +unusedAtTheEnd116 = scalar, U08, 795, "", 1, 0 +unusedAtTheEnd117 = scalar, U08, 796, "", 1, 0 +unusedAtTheEnd118 = scalar, U08, 797, "", 1, 0 +unusedAtTheEnd119 = scalar, U08, 798, "", 1, 0 +unusedAtTheEnd120 = scalar, U08, 799, "", 1, 0 +; total TS size = 800 +totalFuelCorrection = scalar, F32, 800, "mult", 1,0 +running_postCrankingFuelCorrection = scalar, F32, 804, "", 1, 0 +running_intakeTemperatureCoefficient = scalar, F32, 808, "", 1, 0 +running_coolantTemperatureCoefficient = scalar, F32, 812, "", 1, 0 +running_timeSinceCrankingInSecs = scalar, F32, 816, "secs", 1,0 +running_baseFuel = scalar, U16, 820, "mg", 0.01, 0 +running_fuel = scalar, U16, 822, "mg", 0.01, 0 +afrTableYAxis = scalar, U16, 824, "%", 0.01,0 +targetLambda = scalar, U16, 826, "", 1.0E-4,0 +targetAFR = scalar, U16, 828, "ratio", 0.001,0 +stoichiometricRatio = scalar, U16, 830, "ratio", 0.001, 0 +sdTcharge_coff = scalar, F32, 832, "", 1, 0 +sdAirMassInOneCylinder = scalar, F32, 836, "g", 1, 0 +normalizedCylinderFilling = scalar, F32, 840, "%", 1, 0 +brokenInjector = scalar, U08, 844, "", 1, 0 +injectorHwIssue = bits, U32, 848, [0:0] +; total TS size = 852 +baseDwell = scalar, F32, 852, "ms", 1,0 +sparkDwell = scalar, F32, 856, "ms", 1,0 +dwellAngle = scalar, F32, 860, "deg", 1,0 +cltTimingCorrection = scalar, S16, 864, "deg", 0.01,0 +timingIatCorrection = scalar, S16, 866, "deg", 0.01,0 +timingPidCorrection = scalar, S16, 868, "deg", 0.01,0 +baseIgnitionAdvance = scalar, S16, 870, "deg", 0.02, 0 +correctedIgnitionAdvance = scalar, S16, 872, "deg", 0.02, 0 +dwellVoltageCorrection = scalar, F32, 876, "", 1, 0 +luaTimingAdd = scalar, F32, 880, "deg", 1, 0 +luaTimingMult = scalar, F32, 884, "deg", 1, 0 +luaIgnitionSkip = bits, U32, 888, [0:0] +; total TS size = 892 +m_knockLevel = scalar, F32, 892, "Volts", 1, 0 +m_knockCyl1 = scalar, S08, 896, "dBv", 1, 0 +m_knockCyl2 = scalar, S08, 897, "dBv", 1, 0 +m_knockCyl3 = scalar, S08, 898, "dBv", 1, 0 +m_knockCyl4 = scalar, S08, 899, "dBv", 1, 0 +m_knockCyl5 = scalar, S08, 900, "dBv", 1, 0 +m_knockCyl6 = scalar, S08, 901, "dBv", 1, 0 +m_knockCyl7 = scalar, S08, 902, "dBv", 1, 0 +m_knockCyl8 = scalar, S08, 903, "dBv", 1, 0 +m_knockCyl9 = scalar, S08, 904, "dBv", 1, 0 +m_knockCyl10 = scalar, S08, 905, "dBv", 1, 0 +m_knockCyl11 = scalar, S08, 906, "dBv", 1, 0 +m_knockCyl12 = scalar, S08, 907, "dBv", 1, 0 +m_knockRetard = scalar, F32, 908, "deg", 1,0 +m_knockThreshold = scalar, F32, 912, "", 1, 0 +m_knockCount = scalar, U32, 916, "", 1, 0 +m_maximumRetard = scalar, F32, 920, "", 1, 0 +; total TS size = 924 +throttleUseWotModel = bits, U32, 924, [0:0] +throttleModelCrossoverAngle = scalar, S16, 928, "%", 0.01, 0 +throttleEstimatedFlow = scalar, F32, 932, "g/s", 1, 0 +; total TS size = 936 +m_requested_pump = scalar, F32, 936, "", 1, 0 +fuel_requested_percent = scalar, F32, 940, "", 1, 0 +fuel_requested_percent_pi = scalar, F32, 944, "", 1, 0 +noValve = bits, U32, 948, [0:0] +angleAboveMin = bits, U32, 948, [1:1] +isHpfpInactive = bits, U32, 948, [2:2] +m_pressureTarget_kPa = scalar, F32, 952, "", 1, 0 +nextLobe = scalar, F32, 956, "", 1, 0 +di_nextStart = scalar, F32, 960, "v", 1, 0 +; total TS size = 964 +m_deadtime = scalar, F32, 964, "ms", 1, 0 +pressureDelta = scalar, F32, 968, "kPa", 1, 0 +pressureRatio = scalar, F32, 972, "", 1, 0 +; total TS size = 976 +retardThresholdRpm = scalar, S32, 976, "", 1, 0 +combinedConditions = bits, U32, 980, [0:0] +launchActivatePinState = bits, U32, 980, [1:1] +isLaunchCondition = bits, U32, 980, [2:2] +isSwitchActivated = bits, U32, 980, [3:3] +isClutchActivated = bits, U32, 980, [4:4] +isValidInputPin = bits, U32, 980, [5:5] +activateSwitchCondition = bits, U32, 980, [6:6] +rpmCondition = bits, U32, 980, [7:7] +speedCondition = bits, U32, 980, [8:8] +tpsCondition = bits, U32, 980, [9:9] +; total TS size = 984 +isAntilagCondition = bits, U32, 984, [0:0] +ALSMinRPMCondition = bits, U32, 984, [1:1] +ALSMaxRPMCondition = bits, U32, 984, [2:2] +ALSMinCLTCondition = bits, U32, 984, [3:3] +ALSMaxCLTCondition = bits, U32, 984, [4:4] +ALSMaxThrottleIntentCondition = bits, U32, 984, [5:5] +isALSSwitchActivated = bits, U32, 984, [6:6] +ALSActivatePinState = bits, U32, 984, [7:7] +ALSSwitchCondition = bits, U32, 984, [8:8] +ALSTimerCondition = bits, U32, 984, [9:9] +fuelALSCorrection = scalar, F32, 988, "", 1, 0 +timingALSCorrection = scalar, S16, 992, "deg", 0.01, 0 +timingALSSkip = scalar, S16, 994, "deg", 0.01, 0 +; total TS size = 996 +isTpsInvalid = bits, U32, 996, [0:0] +m_shouldResetPid = bits, U32, 996, [1:1] +isBelowClosedLoopThreshold = bits, U32, 996, [2:2] +isNotClosedLoop = bits, U32, 996, [3:3] +isZeroRpm = bits, U32, 996, [4:4] +hasInitBoost = bits, U32, 996, [5:5] +rpmTooLow = bits, U32, 996, [6:6] +tpsTooLow = bits, U32, 996, [7:7] +mapTooLow = bits, U32, 996, [8:8] +isPlantValid = bits, U32, 996, [9:9] +luaTargetAdd = scalar, S16, 1000, "v", 0.5,0 +boostOutput = scalar, S16, 1002, "percent", 0.01,0 +luaTargetMult = scalar, F32, 1004, "v", 1,0 +openLoopPart = scalar, F32, 1008, "v", 1,0 +luaOpenLoopAdd = scalar, F32, 1012, "v", 1,0 +boostControllerClosedLoopPart = scalar, S08, 1016, "%", 0.5,0 +boostControlTarget = scalar, S16, 1018, "kPa", 0.03333333333333333,0 +; total TS size = 1020 +acButtonState = scalar, S08, 1020, "", 1, 0 +m_acEnabled = bits, U32, 1024, [0:0] +engineTooSlow = bits, U32, 1024, [1:1] +engineTooFast = bits, U32, 1024, [2:2] +noClt = bits, U32, 1024, [3:3] +engineTooHot = bits, U32, 1024, [4:4] +tpsTooHigh = bits, U32, 1024, [5:5] +isDisabledByLua = bits, U32, 1024, [6:6] +acCompressorState = bits, U32, 1024, [7:7] +latest_usage_ac_control = scalar, S32, 1028, "", 1, 0 +acSwitchLastChangeTimeMs = scalar, S32, 1032, "", 1, 0 +; total TS size = 1036 +cranking = bits, U32, 1036, [0:0] +notRunning = bits, U32, 1036, [1:1] +disabledWhileEngineStopped = bits, U32, 1036, [2:2] +brokenClt = bits, U32, 1036, [3:3] +enabledForAc = bits, U32, 1036, [4:4] +hot = bits, U32, 1036, [5:5] +cold = bits, U32, 1036, [6:6] +; total TS size = 1040 +isPrime = bits, U32, 1040, [0:0] +engineTurnedRecently = bits, U32, 1040, [1:1] +isFuelPumpOn = bits, U32, 1040, [2:2] +ignitionOn = bits, U32, 1040, [3:3] +; total TS size = 1044 +isBenchTest = bits, U32, 1044, [0:0] +hasIgnitionVoltage = bits, U32, 1044, [1:1] +mainRelayState = bits, U32, 1044, [2:2] +delayedShutoffRequested = bits, U32, 1044, [3:3] +; total TS size = 1048 +lua_fuelAdd = scalar, F32, 1048, "g", 1, 0 +lua_fuelMult = scalar, F32, 1052, "", 1, 0 +lua_clutchUpState = bits, U32, 1056, [0:0] +lua_brakePedalState = bits, U32, 1056, [1:1] +lua_acRequestState = bits, U32, 1056, [2:2] +lua_luaDisableEtb = bits, U32, 1056, [3:3] +lua_luaIgnCut = bits, U32, 1056, [4:4] +sd_tCharge = scalar, S16, 1060, "deg C", 0.01, 0 +sd_tChargeK = scalar, F32, 1064, "", 1, 0 +crankingFuel_coolantTemperatureCoefficient = scalar, F32, 1068, "", 1, 0 +crankingFuel_tpsCoefficient = scalar, F32, 1072, "", 1, 0 +crankingFuel_durationCoefficient = scalar, F32, 1076, "", 1, 0 +crankingFuel_fuel = scalar, U16, 1080, "mg", 0.01, 0 +baroCorrection = scalar, F32, 1084, "", 1, 0 +hellenBoardId = scalar, S16, 1088, "id", 1, 0 +clutchUpState = scalar, S08, 1090, "", 1, 0 +clutchDownState = scalar, S08, 1091, "", 1, 0 +brakePedalState = scalar, S08, 1092, "", 1, 0 +startStopState = scalar, S08, 1093, "", 1, 0 +startStopPhysicalState = bits, U32, 1096, [0:0] +acrStateDup = bits, U32, 1096, [1:1] +acrEngineMovedRecently = bits, U32, 1096, [2:2] +heaterControlEnabled = bits, U32, 1096, [3:3] +luaDigitalState0 = bits, U32, 1096, [4:4] +luaDigitalState1 = bits, U32, 1096, [5:5] +luaDigitalState2 = bits, U32, 1096, [6:6] +luaDigitalState3 = bits, U32, 1096, [7:7] +startStopStateToggleCounter = scalar, U32, 1100, "", 1, 0 +egtValue1 = scalar, F32, 1104, "", 1, 0 +egtValue2 = scalar, F32, 1108, "", 1, 0 +desiredRpmLimit = scalar, S16, 1112, "rpm", 1, 0 +fuelInjectionCounter = scalar, U32, 1116, "", 1, 0 +sparkCounter = scalar, U32, 1120, "", 1, 0 +fuelingLoad = scalar, F32, 1124, "", 1, 0 +ignitionLoad = scalar, F32, 1128, "", 1, 0 +veTableYAxis = scalar, U16, 1132, "%", 0.01, 0 +; total TS size = 1136 +tpsFrom = scalar, F32, 1136 +tpsTo = scalar, F32, 1140 +deltaTps = scalar, F32, 1144 +extraFuel = scalar, F32, 1148, "", 1, 0 +valueFromTable = scalar, F32, 1152, "", 1, 0 +isAboveAccelThreshold = bits, U32, 1156, [0:0] +isBelowDecelThreshold = bits, U32, 1156, [1:1] +isTimeToResetAccumulator = bits, U32, 1156, [2:2] +isFractionalEnrichment = bits, U32, 1156, [3:3] +belowEpsilon = bits, U32, 1156, [4:4] +tooShort = bits, U32, 1156, [5:5] +fractionalInjFuel = scalar, F32, 1160, "", 1, 0 +accumulatedValue = scalar, F32, 1164, "", 1, 0 +maxExtraPerCycle = scalar, F32, 1168, "", 1, 0 +maxExtraPerPeriod = scalar, F32, 1172, "", 1, 0 +maxInjectedPerPeriod = scalar, F32, 1176, "", 1, 0 +cycleCnt = scalar, S32, 1180, "", 1, 0 +; total TS size = 1184 +hwEventCounters1 = scalar, U32, 1184, "", 1, 0 +hwEventCounters2 = scalar, U32, 1188, "", 1, 0 +hwEventCounters3 = scalar, U32, 1192, "", 1, 0 +hwEventCounters4 = scalar, U32, 1196, "", 1, 0 +hwEventCounters5 = scalar, U32, 1200, "", 1, 0 +hwEventCounters6 = scalar, U32, 1204, "", 1, 0 +vvtCamCounter = scalar, U32, 1208, "", 1, 0 +mapVvt_MAP_AT_SPECIAL_POINT = scalar, F32, 1212, "", 1, 0 +mapVvt_MAP_AT_DIFF = scalar, F32, 1216, "", 1, 0 +mapVvt_MAP_AT_CYCLE_COUNT = scalar, U08, 1220, "", 1, 0 +mapVvt_map_peak = scalar, U08, 1221, "", 1, 0 +currentEngineDecodedPhase = scalar, F32, 1224, "deg", 1, 0 +triggerToothAngleError = scalar, F32, 1228, "deg", 1, 0 +triggerIgnoredToothCount = scalar, U08, 1232, "", 1, 0 +mapCamPrevToothAngle = scalar, F32, 1236, "deg", 1, 0 +isDecodingMapCam = bits, U32, 1240, [0:0] +; total TS size = 1244 +crankSynchronizationCounter = scalar, U32, 1244, "", 1, 0 +vvtSyncGapRatio = scalar, F32, 1248, "", 1, 0 +vvtToothDurations0 = scalar, U32, 1252, "us", 1, 0 +vvtCurrentPosition = scalar, F32, 1256, "sync: Primary Cam Position", 1, 0 +vvtToothPosition1 = scalar, F32, 1260, "sync: Cam Tooth Position", 1, 0 +vvtToothPosition2 = scalar, F32, 1264, "sync: Cam Tooth Position", 1, 0 +vvtToothPosition3 = scalar, F32, 1268, "sync: Cam Tooth Position", 1, 0 +vvtToothPosition4 = scalar, F32, 1272, "sync: Cam Tooth Position", 1, 0 +triggerSyncGapRatio = scalar, F32, 1276, "", 1, 0 +triggerStateIndex = scalar, U08, 1280, "", 1, 0 +camResyncCounter = scalar, U08, 1281, "", 1, 0 +vvtStateIndex = scalar, U08, 1282, "", 1, 0 +; total TS size = 1284 +m_hasSynchronizedPhase = bits, U32, 1284, [0:0] +; total TS size = 1288 +wallFuelCorrection = scalar, F32, 1288, "", 1, 0 +wallFuel = scalar, F32, 1292, "", 1, 0 +; total TS size = 1296 +idleState = bits, S32, 1296, [0:2], "not important" +currentIdlePosition = scalar, F32, 1300 +baseIdlePosition = scalar, F32, 1304 +idleClosedLoop = scalar, F32, 1308 +iacByTpsTaper = scalar, F32, 1312 +throttlePedalUpState = scalar, S32, 1316, "", 1, 0 +mightResetPid = bits, U32, 1320, [0:0] +shouldResetPid = bits, U32, 1320, [1:1] +wasResetPid = bits, U32, 1320, [2:2] +mustResetPid = bits, U32, 1320, [3:3] +isCranking = bits, U32, 1320, [4:4] +isIacTableForCoasting = bits, U32, 1320, [5:5] +notIdling = bits, U32, 1320, [6:6] +needReset = bits, U32, 1320, [7:7] +isInDeadZone = bits, U32, 1320, [8:8] +isBlipping = bits, U32, 1320, [9:9] +useClosedLoop = bits, U32, 1320, [10:10] +badTps = bits, U32, 1320, [11:11] +looksLikeRunning = bits, U32, 1320, [12:12] +looksLikeCoasting = bits, U32, 1320, [13:13] +looksLikeCrankToIdle = bits, U32, 1320, [14:14] +isIdleCoasting = bits, U32, 1320, [15:15] +isIdleClosedLoop = bits, U32, 1320, [16:16] +idleTarget = scalar, S32, 1324, "", 1, 0 +targetRpmByClt = scalar, S32, 1328, "", 1, 0 +targetRpmAc = scalar, S32, 1332, "", 1, 0 +iacByRpmTaper = scalar, F32, 1336 +luaAdd = scalar, F32, 1340 +; total TS size = 1344 +idlePosition = scalar, F32, 1344, "per", 1,0 +trim = scalar, F32, 1348, "", 1, 0 +luaAdjustment = scalar, F32, 1352, "per", 1,0 +m_wastegatePosition = scalar, F32, 1356, "per", 1,0 +etbFeedForward = scalar, F32, 1360 +etbIntegralError = scalar, F32, 1364, "", 1, 0 +etbCurrentTarget = scalar, F32, 1368, "%", 1, 0 +etbCurrentAdjustedTarget = scalar, F32, 1372, "%", 1, 0 +etbRevLimitActive = bits, U32, 1376, [0:0] +jamDetected = bits, U32, 1376, [1:1] +etbDutyRateOfChange = scalar, F32, 1380, "per", 1,0 +etbDutyAverage = scalar, F32, 1384, "per", 1,0 +etbTpsErrorCounter = scalar, U16, 1388, "count", 1,0 +etbPpsErrorCounter = scalar, U16, 1390, "count", 1,0 +etbErrorCode = scalar, S08, 1392, "", 1, 0 +jamTimer = scalar, U16, 1394, "sec", 0.01, 0 +; total TS size = 1396 +faultCode = scalar, U08, 1396, "", 1, 0 +heaterDuty = scalar, U08, 1397, "%", 1, 0 +pumpDuty = scalar, U08, 1398, "%", 1, 0 +tempC = scalar, U16, 1400, "C", 1, 0 +nernstVoltage = scalar, U16, 1402, "V", 0.001, 0 +esr = scalar, U16, 1404, "ohm", 1, 0 +; total TS size = 1408 +dcOutput0 = scalar, F32, 1408, "per", 1,0 +isEnabled0_int = scalar, U08, 1412, "per", 1,0 +isEnabled0 = bits, U32, 1416, [0:0] +; total TS size = 1420 +value0 = scalar, U16, 1420, "value", 1,0 +value1 = scalar, U16, 1422, "value", 1,0 +errorRate = scalar, F32, 1424, "ratio", 1,0 +; total TS size = 1428 +vvtTarget = scalar, U16, 1428, "deg", 0.1, 0 +vvtOutput = scalar, U08, 1430, "%", 0.5, 0 +; total TS size = 1432 +lambdaCurrentlyGood = bits, U32, 1432, [0:0] +lambdaMonitorCut = bits, U32, 1432, [1:1] +lambdaTimeSinceGood = scalar, U16, 1436, "sec", 0.01, 0 +; total TS size = 1440 + + + time = { timeNow } + + egoCorrectionForVeAnalyze = { 100 + fuelPidCorrection1 } + + wbo0_hasFault = { enableAemXSeries && (faultCode >= 3) } + +[PcVariables] + tuneCrcPcVariable = continuousChannelValue, tuneCrc16 + + wueAfrTargetOffset = array, S16, [ 16], ":1", 0.1, 0.0, -3.0, 3.0, 1; + wueAnalRecommend = array, U08, [ 16], "%", 1.00, 0.0, 100, 255.00, 0 + + gearCountArray = array, S08, [10], "Gear", 1, 0, -1, { 10 - 2 }, 0, noMsqSave + solenoidCountArray = array, U08, [6], "Solenoid", 1, 0, 1, 6, 0, noMsqSave + + rangeInputArray = array, U08, [6], "Input", 1, 0, 0, 6, 0, noMsqSave + rangeStateArray = array, U08, [9], "State", 1, 0, 0, 9, 0, noMsqSave + +; wall of debug mode :) +; https://rusefi.com/wiki/index.php?title=Manual:Debug_fields +; Alternator TPS Acceleration Idle Engine Load Acc Trigger Counters VVT1 PID Cranking Ignition Timing Fu Corr VSS SD Card Knock Wall Wetting ETB PID Executor InstantRpm CJ125 CAN MAP TLE8888 Analog inputs 2 Start ETB Autotune DYNO_VIEW LOGIC_ANALYZER Wideband TCU Lua VVT2 PID VVT3 PID VVT4 PID +; 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 +; DBG_ALTERNATOR_PID DBG_TPS_ACCEL DBG_IDLE_CONTROL + debugFieldF1List = bits, U08, [0:7], "Alt: Controller Output", "From TPS", "", "Idle: Controller Output", "Idle output", " ", "", "VVT1: Controller Output"," ", "", "Ign IAT Corr", "", "", "Total SD", "last volts", "", "WW: Alpha", "ETB Controller Output", "", "", "df1", "df1", "InstantRpm", "", "24:df1", "CJ125: output", "", "MAP Average", "", "", "", "", "TPS1 Pri/Sec Diff", "", "", "", "","S unused" "", "Osc Amplitude", "", "", "", "" , "VSS", "", "WB: Pump DAC duty", "", "Lua Debug 1", "VVT2: Controller Output","VVT3: Controller Output","VVT4: Controller Output" + debugFieldF2List = bits, U08, [0:7], "Alt: I Term", "To TPS", "", "Idle: I Term", "Idle df2", " ", "", "VVT1: I Term", " ", "", "Ign CLT Corr", "", "", "Write Cnt","last filtered","", "WW: Beta", "ETB I Term", "", "", "df2", "df2", "InstantRPM Ratio","", "24:df2", "CJ125: i term", "", "MAP Duration", "", "", "", "", "TPS2 Pri/Sec Diff", "", "", "", "","S unused" "", "Duty Amplitude", "", "", "", "" , "Speed", "", "WB: ESR", "", "Lua Debug 2", "VVT2: I Term", "VVT3: I Term", "VVT4: I Term" + debugFieldF3List = bits, U08, [0:7], "Alt: Previous Error", "Current TPS<>TPS", "", "Idle: prev error", "Idle df3", "ICU sum", "", "VVT1: prev error", "", "", "", "", "", "Sync Cnt", "", "", "WW: film mass", "ETB err", "", "", "df3", "df3", "22df3", "", "24:df3", "CJ125: err", "", "MAP Fast", "", "", "", "", "TPS1/2 Diff", "", "", "", "","S unused" "", "Tu", "", "", "", "" , "DeltaSpeed", "", "WB: Nernst Voltage", "", "Lua Debug 3", "VVT2: prev error", "VVT3: prev error", "VVT4: prev error" + debugFieldF4List = bits, U08, [0:7], "Alt: I Gain", "Extra Fuel", "", "Idle: I Gain", "Idle df4", " ", "", "VVT1: I Gain", "", "", "Ign PID Adj", "", "", "File Cnt", "", "", "WW: m_cmd", "ETB I setting", "", "", "df4", "df4", "22df4", "", "24:df4", "CJ125: UA", "", "MAP Estimate", "", "", "", "", "Acc Pedal Pri/Sec Diff","", "", "", "","S unused" "", "Ku", "", "", "", "", "accel", "", "WB: Lambda", "", "Lua Debug 4", "VVT2: I Gain", "VVT3: I Gain", "VVT4: I Gain" + debugFieldF5List = bits, U08, [0:7], "Alt: D Gain", "df5", "", "Idle: D Gain", "Idle df5", " ", "df5", "VVT1: D Gain", "", "", "", "", "", "", "", "", "WW: film mass next","ETB D setting", "df5", "df5", "df5", "df5", "22df5", "", "24:df5", "CJ125: UR", "", "MAP Instant", "", "", "", "", "TPS1 Pri/Sec Ratio", "", "", "", "","S unused" "", "Kp", "", "", "", "", "", "", "", "", "Lua Debug 5", "VVT2: D Gain", "VVT3: D Gain", "VVT4: D Gain" + debugFieldF6List = bits, U08, [0:7], "Alt: D Term", "", "", "Idle: D Term", "Idle df6", " ", "", "VVT1: D Term", "", "", "", "", "", "", "", "", "", "ETB df6", "", "", "df6", "df6", "22df6", "", "24:df6", "cj: f7", "", "", "", "", "", "", "", "", "", "", "","S unused" "", "Ki", "", "", "", "", "", "", "", "", "Lua Debug 6", "VVT2: D Term", "VVT3: D Term", "VVT4: D Term" + debugFieldF7List = bits, U08, [0:7], "Alt: Max-Value", "", "", "Idle: Max-Value", "Idle df7", "", "", "VVT1: Max-Value", "", "", "", "", "", "", "", "", "", "ETB df7", "", "", "df7", "df7", "22df7", "", "24:df7", "cj: f7", "", "", "", "", "", "", "", "", "", "", "","S unused" "", "Kd", "", "", "", "", "", "", "", "", "Lua Debug 7", "", "", "" + debugFieldI1List = bits, U08, [0:7], "Alt: P Gain", "", "", "Idle: P Gain", "Idle di1", " ", "", "VVT1: P Gain", " ", "Cycle Counter", "Multispark Count", "", "", "", "hip corr", "", "", "ETB P-Gain", "t counter", "", "di1", "di1", "Spark Event Gap","", "24:di1", "CJ125: state", "read count","MAP counter", "", "", "", "SPI Counter", "", "", "", "", "","Start Count", "", "", "", "", "", "", "deltatime", "", "", "Solenoid 1 State", "Lua memory used","VVT2: P Gain", "VVT3: P Gain", "VVT4: P Gain" + debugFieldI2List = bits, U08, [0:7], "Alt: Offset", "", "", "Idle: Offset", "Idle di2", " ", "", "VVT1: Offset", "", "", "", "", "", "", "hip incor", "", "", "ETB di2", "invocationcounter", "", "di2", "di2", "Inj Event Gap", "", "24:di2", "", "write count","MAP raw ADC", "", "", "", "Latest Transmit","", "", "", "", "","Starter Enable", "", "", "", "", "", "", "", "", "", "Solenoid 2 State", "", "VVT2: Offset", "VVT3: Offset", "VVT4: Offset" + debugFieldI3List = bits, U08, [0:7], "Alt: Reset Cnt", "", "", "Idle: Reset Cnt", "Idle di3", " ", "", "VVT1: 10xTarget", "", "", "", "", "", "", "", "", "", "ETB di3", "s counter", "", "di3", "di3", "22di3", "", "24:di3", "", "write err", "", "", "", "", "Latest Received","", "", "", "", "","Starter Disable","", "", "", "", "", "", "", "", "", "Solenoid 3 State", "", "VVT2: 10xTarger", "VVT3: 10xTarger", "VVT4: 10xTarger" + debugFieldI4List = bits, U08, [0:7], "Alt: Period", "", "", "Idle: State", "Idle di4", "Cycle Cnt 1", "", "", "", "", "", "", "", "", "", "", "", "ETB di4", "executor", "", "di4", "di4", "22di4", "", "24:di4", "", "", "", "", "", "", "Init Count", "", "", "", "", "","" "", "", "", "", "", "", "", "", "", "Solenoid 4 State", "", "", "", "" + debugFieldI5List = bits, U08, [0:7], "", "", "", "", "Idle di5", "Cycle Cnt 2", "", "", "", "", "", "", "", "", "", "di5", "di5", "ETB di5", "max executor", "di5", "di5", "di5", "22di5", "di5", "di5", "di5", "di5", "di5", "", "di5", "di5", "di5", "", "di5", "di5", "di5", "","" "", "", "", "", "", "", "", "", "", "Solenoid 5 State", "", "", "", "" + + wboFaultCodeList = bits, U08, [0:3], "OK", "silent", "cranking", "failed to heat", "overheat", "underheat", "no supply", "legacy" + + injModeList = bits, U08, [0:3], "Simultaneous", "Sequential", "Batch", "Single Point" + ignModeList = bits, U08, [0:3], "Single Coil", "Sequential", "Wasted", "Two Coils" + +; ClearReason + fuelIgnCutCodeList = bits, U08, [0:7], "None", "fatal error", "setting disabled", "RPM limit", "fault RPM limit", "boost cut", "oil pressure", "stop requested", "ETB problem", "launch control", "max injector duty", "flood clear", "engine sync", "kickstart", "ign off", "Lua", "ACR", "Lambda Prot", "GDI Comms", "Brake" + +; TpsState + etbCutCodeList = bits, U08, [0:7], "None", "engine stopped", "TPS error", "PPS error", "TPS noise", "PID noise", "Lua", "Manual", "N/A", "Redundancy", "PPS noise" + +[ConstantsExtensions] + ; defaultValue is used to provide TunerStudio with a value to use in the case of + ; the constant not yet being initialized. This is primarily important if the + ; constant is used as a variable in the ini. + ; defaultValue = constantName, value; + defaultValue = wueAfrTargetOffset, -1.5 -1.4 -1.15 -0.95 -0.775 -0.65 -0.5625 -0.5 -0.4375 -0.375 -0.3125 -0.25 -0.1875 -0.125 -0.0625 0 + + ; this magic is best described in output_channels.txt search for 'maintainConstantValue' + ; TPS 1 Primary + maintainConstantValue = tpsMax, { (calibrationMode == 1 ) ? calibrationValue : tpsMax } + maintainConstantValue = tpsMin, { (calibrationMode == 2 ) ? calibrationValue : tpsMin } + + ; TPS 1 Secondary + maintainConstantValue = tps1SecondaryMax, { (calibrationMode == 6 ) ? calibrationValue : tps1SecondaryMax } + maintainConstantValue = tps1SecondaryMin, { (calibrationMode == 7 ) ? calibrationValue : tps1SecondaryMin } + + ; TPS 2 Primary + maintainConstantValue = tps2Max, { (calibrationMode == 8 ) ? calibrationValue : tps2Max } + maintainConstantValue = tps2Min, { (calibrationMode == 9 ) ? calibrationValue : tps2Min } + + ; TPS 2 Secondary + maintainConstantValue = tps2SecondaryMax, { (calibrationMode == 10 ) ? calibrationValue : tps2SecondaryMax } + maintainConstantValue = tps2SecondaryMin, { (calibrationMode == 11 ) ? calibrationValue : tps2SecondaryMin } + + ; ETB Auto Gain Calibration + maintainConstantValue = etb_pFactor, { (calibrationMode == 3 ) ? calibrationValue : etb_pFactor } + maintainConstantValue = etb_iFactor, { (calibrationMode == 4 ) ? calibrationValue : etb_iFactor } + maintainConstantValue = etb_dFactor, { (calibrationMode == 5 ) ? calibrationValue : etb_dFactor } + + maintainConstantValue = throttlePedalUpVoltage, { (calibrationMode == 12 ) ? calibrationValue : throttlePedalUpVoltage } + maintainConstantValue = throttlePedalSecondaryUpVoltage, { (calibrationMode == 12 ) ? calibrationValue2 : throttlePedalSecondaryUpVoltage } + + maintainConstantValue = throttlePedalWOTVoltage, { (calibrationMode == 13 ) ? calibrationValue : throttlePedalWOTVoltage } + maintainConstantValue = throttlePedalSecondaryWOTVoltage, { (calibrationMode == 13 ) ? calibrationValue2 : throttlePedalSecondaryWOTVoltage } + + requiresPowerCycle = boardUseCanTerminator + requiresPowerCycle = lps25BaroSensorScl + requiresPowerCycle = lps25BaroSensorSda + requiresPowerCycle = binarySerialTxPin + requiresPowerCycle = binarySerialRxPin + requiresPowerCycle = tunerStudioSerialSpeed + requiresPowerCycle = auxSerialRxPin + requiresPowerCycle = auxSerialTxPin + + requiresPowerCycle = canWriteEnabled + requiresPowerCycle = canReadEnabled + requiresPowerCycle = can1ListenMode + requiresPowerCycle = can2ListenMode + + requiresPowerCycle = startStopButtonPin + requiresPowerCycle = startStopButtonMode + + requiresPowerCycle = enableAemXSeries + + requiresPowerCycle = etb_use_two_wires + requiresPowerCycle = etbSplit + requiresPowerCycle = etbFreq + requiresPowerCycle = etbFunctions1 + requiresPowerCycle = etbFunctions2 + + requiresPowerCycle = idle_solenoidFrequency + requiresPowerCycle = boostPwmFrequency + requiresPowerCycle = alternatorPwmFrequency + requiresPowerCycle = vvtOutputFrequency + requiresPowerCycle = vvtPins1 + requiresPowerCycle = vvtPins2 + requiresPowerCycle = vvtPins3 + requiresPowerCycle = vvtPins4 + + requiresPowerCycle = auxAnalogInputs1 + requiresPowerCycle = auxAnalogInputs2 + requiresPowerCycle = auxAnalogInputs3 + requiresPowerCycle = auxAnalogInputs4 + requiresPowerCycle = auxAnalogInputs5 + requiresPowerCycle = auxAnalogInputs6 + requiresPowerCycle = auxAnalogInputs7 + requiresPowerCycle = auxAnalogInputs8 + + requiresPowerCycle = knockBandCustom + + readOnly = warning_message + + defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8 + readOnly = gearCountArray + defaultValue = solenoidCountArray, 1 2 3 4 5 6 7 8 + readOnly = solenoidCountArray + + defaultValue = rangeStateArray, 0 1 2 3 4 5 6 7 8 + readOnly = rangeStateArray + defaultValue = rangeInputArray, 0 1 2 3 4 5 + readOnly = solenoidCountArray + +[CurveEditor] +; xAxis = leftValue, rightValue, step +; yAxis = bottomValue, topValue, step + + curve = knockThresholdCurve, "Engine knock threshold RPM based" + columnLabel = "RPM", "Threshold" + xAxis = 0, 8000, 9 + yAxis = 0, 8, 10 + xBins = knockNoiseRpmBins, RPMValue + yBins = knockBaseNoise + gauge = RPMGauge + + curve = narrowToWideOxygenCurve, "Narrow to Wideband approximation" + columnLabel = "Voltage", "AFR" + xAxis = 0, 6, 10 + yAxis = 0, 28, 10 + xBins = narrowToWideOxygenBins + yBins = narrowToWideOxygen +#if LAMBDA + gauge = lambda1Gauge +#else + gauge = afr1Gauge +#endif + + curve = scriptCurve1, "Script Curve #1" + columnLabel = "X", "Y" + xAxis = 0, 128, 10 + yAxis = -155, 150, 10 + xBins = scriptCurve1Bins + yBins = scriptCurve1 + showTextValues = true + + curve = scriptCurve2, "Script Curve #2" + columnLabel = "X", "Y" + xAxis = 0, 128, 10 + yAxis = -150, 150, 10 + xBins = scriptCurve2Bins + yBins = scriptCurve2 + showTextValues = true + + curve = scriptCurve3, "Script Curve #3" + columnLabel = "X", "Y" + xAxis = 0, 128, 10 + yAxis = -5, 5, 10 + xBins = scriptCurve3Bins + yBins = scriptCurve3 + showTextValues = true + + curve = scriptCurve4, "Script Curve #4" + columnLabel = "X", "Y" + xAxis = 0, 128, 10 + yAxis = -5, 5, 10 + xBins = scriptCurve4Bins + yBins = scriptCurve4 + showTextValues = true + + curve = scriptCurve5, "Script Curve #5" + columnLabel = "X", "Y" + xAxis = 0, 128, 10 + yAxis = -5, 5, 10 + xBins = scriptCurve5Bins + yBins = scriptCurve5 + showTextValues = true + + curve = scriptCurve6, "Script Curve #6" + columnLabel = "X", "Y" + xAxis = 0, 128, 10 + yAxis = -5, 5, 10 + xBins = scriptCurve6Bins + yBins = scriptCurve6 + showTextValues = true + + curve = dwellCorrection, "Dwell time base" + columnLabel = "RPM", "Dwell" + xAxis = 0, 8000, 9 + yAxis = 0, 8, 9 + xBins = sparkDwellRpmBins, RPMValue + yBins = sparkDwellValues + gauge = RPMGauge + + curve = dwellVoltageCorrection, "Dwell voltage correction" + columnLabel = "Battery Volts", "Multiplier" + xAxis = 6, 16, 11 + yAxis = 0, 3, 7 + xBins = dwellVoltageCorrVoltBins, VBatt + yBins = dwellVoltageCorrValues + gauge = VBattGauge + + curve = tpsTspRpmCorrection, "Transient RPM correction" + columnLabel = "RPM", "Multiplier" + xAxis = 0, 8000, 9 + yAxis = 0, 3, 7 + xBins = tpsTspCorrValuesBins, RPMValue + yBins = tpsTspCorrValues + gauge = RPMGauge + + curve = primingPulse, "Priming pulse fuel mass" + columnLabel = "Coolant", "Prime Pulse" + xAxis = -40, 120, 9 + yAxis = 0, 1000, 9 + xBins = primeBins, coolant + yBins = primeValues + gauge = CLTGauge + + curve = map_samplingAngleCurve, "MAP Sampling Start Angle" + columnLabel = "RPM", "Angle" + xAxis = 0, 8000, 9 + yAxis = 0, 180, 10 + xBins = map_samplingAngleBins, RPMValue + yBins = map_samplingAngle + gauge = MAPGauge + + curve = map_samplingWindowCurve, "MAP Sampling Duration" + columnLabel = "RPM", "Window" + xAxis = 0, 8000, 9 + yAxis = 0, 180, 10 + xBins = map_samplingWindowBins, RPMValue + yBins = map_samplingWindow + gauge = MAPGauge + + curve = injectorsDeadTime, "Injector dead time" + columnLabel = "Battery", "Dead Time" + xAxis = 6, 16, 11 + yAxis = 0, 8, 9 + xBins = injector_battLagCorrBins, VBatt + yBins = injector_battLagCorr + gauge = VBattGauge + + curve = vrThresholdCurve1, "VR 1 Threshold" + columnLabel = "RPM", "Voltage" + xAxis = 0, 8000, 9 + yAxis = 0, 2.5, 6 + xBins = vrThreshold1_rpmBins, RPMValue + yBins = vrThreshold1_values + + curve = vrThresholdCurve2, "VR 2 Threshold" + columnLabel = "RPM", "Voltage" + xAxis = 0, 8000, 9 + yAxis = 0, 2.5, 6 + xBins = vrThreshold2_rpmBins, RPMValue + yBins = vrThreshold2_values + + curve = mafDecodingCurve, "MAF sensor" + columnLabel = "Voltage", "kg/hour" + xAxis = -1, 6, 10 + yAxis = -30, 1300, 10 + xBins = mafDecodingBins, rawMaf + yBins = mafDecoding + gauge = rawMafGauge + + curve = iatFuelCorrCurve, "Intake air temperature fuel Multiplier" + topicHelp = "iatFuelCorrCurveHelp" + columnLabel = "Air Temp", "Multiplier" + xAxis = -40, 120, 9 + yAxis = 0, 2, 11 + xBins = iatFuelCorrBins, intake + yBins = iatFuelCorr + gauge = IATGauge + + curve = cltTimingCorrCurve, "Warmup timing correction" + columnLabel = "Coolant", "Extra" + xAxis = -40, 120, 9 + yAxis = 0, 20, 9 + xBins = cltTimingBins, coolant + yBins = cltTimingExtra + gauge = CLTGauge + + curve = cltFuelCorrCurve, "Warmup fuel manual Multiplier" + columnLabel = "Coolant", "Multiplier" + xAxis = -40, 120, 9 + yAxis = 0, 3, 10 + xBins = cltFuelCorrBins, coolant + yBins = cltFuelCorr + gauge = CLTGauge + + curve = crankingCltCurve, "Cranking Coolant Temperature Multiplier" + columnLabel = "Coolant", "Multiplier" + xAxis = -40, 120, 9 + yAxis = 0, 3, 10 + xBins = crankingFuelBins, coolant + yBins = crankingFuelCoef + gauge = CLTGauge + + curve = crankingCltCurveE100, "Cranking Coolant Temperature Multiplier (Flex Fuel E85)" + columnLabel = "Coolant", "Multiplier" + xAxis = -40, 120, 9 + yAxis = 0, 3, 10 + xBins = crankingFuelBins, coolant + yBins = crankingFuelCoefE100 + gauge = CLTGauge + + curve = cltRevLimitCurve, "" + columnLabel = "Coolant", "RPM Limit" + xAxis = -40, 120, 9 + yAxis = 0, 8000, 9 + xBins = cltRevLimitRpmBins, coolant + yBins = cltRevLimitRpm + gauge = CLTGauge + + curve = etbTpsBiasCurve, "Electronic TB Bias Curve" + columnLabel = "TPS", "duty bias" + xAxis = 0, 50, 11 + yAxis = -40, 40, 9 + xBins = etbBiasBins, TPSValue + yBins = etbBiasValues + gauge = TPSGauge + + curve = crankingTpsCurve, "Cranking TPS Multiplier" + columnLabel = "TPS", "Multiplier" + xAxis = 0, 100, 11 + yAxis = 0, 3, 10 + xBins = crankingTpsBins, TPSValue + yBins = crankingTpsCoef + gauge = TPSGauge + + curve = crankingDurationCurve, "Cranking Cycle Multiplier" + columnLabel = "Engine Cycle", "Multiplier" + xAxis = 0, 50, 11 + yAxis = 0, 5, 6 + xBins = crankingCycleBins + yBins = crankingCycleCoef + + + curve = cltIdleCurve, "Warmup Idle multiplier" + columnLabel = "Coolant", "Multiplier" + xAxis = -40, 120, 10 + yAxis = 0, 3, 10 + xBins = cltIdleCorrBins, coolant + yBins = cltIdleCorr + gauge = CLTGauge + + curve = iacCoastingCurve, "Coasting IAC Position" + columnLabel = "RPM", "Multiplier" + xAxis = -40, 120, 9 + yAxis = 0, 100, 10 + xBins = iacCoastingRpmBins, RPMValue + yBins = iacCoasting + gauge = idleAirValvePositionGauge + + curve = cltCrankingCurve, "Cranking Idle Air multiplier" + columnLabel = "Coolant", "Multiplier" + xAxis = -40, 120, 9 + yAxis = 0, 3, 10 + xBins = cltCrankingCorrBins, coolant + yBins = cltCrankingCorr + gauge = CLTGauge + + curve = cltIdleRPMCurve, "Idle Target RPM" + columnLabel = "Coolant", "RPM" + xAxis = -40, 120, 9 + yAxis = 0, 2400, 13 + xBins = cltIdleRpmBins, coolant + yBins = cltIdleRpm, RPMValue + gauge = CLTGauge + + curve = idleAdvanceCurve, "Idle Advance Angle" + columnLabel = "RPM", "degrees" + xAxis = 0, 2400, 13 + yAxis = -100, 100, 11 + xBins = idleAdvanceBins, RPMValue + yBins = idleAdvance + gauge = RPMGauge + + curve = crankingAdvanceCurve, "Cranking Advance Angle" + columnLabel = "RPM", "degrees" + xAxis = 0, 1200, 13 + yAxis = -30, 30, 11 + xBins = crankingAdvanceBins, RPMValue + yBins = crankingAdvance + gauge = RPMGauge + + curve = fuelLevelCurve, "Fuel Level" + columnLabel = "Voltage", "%" + xAxis = 0, 5, 6 + yAxis = 0, 100, 11 + xBins = fuelLevelBins + yBins = fuelLevelValues + gauge = fuelTankLevelGauge + + curve = wueAfrTargetOffsetCurve, "AFR Target Temperature Adjustment" + columnLabel = "Coolant", "AFR Offset" + xAxis = -40, 200, 9 + yAxis = -3, 1, 5 + xBins = cltFuelCorrBins, coolant + yBins = wueAfrTargetOffset + gauge = cltGauge + + curve = wueAnalyzer_warmup_curve, "Warmup Enrichment" + columnLabel = "Coolant", "Current WUE", "Coolant", "Corrected" + xAxis = -40, 200, 9 + yAxis = 90, 500, 6 + xBins = cltFuelCorrBins, coolant + yBins = cltFuelCorr + yBins = wueAnalRecommend + ;gauge = cltGauge + + lineLabel = "Warmup Correction" + lineLabel = "Recommended WUE" + + curve = hpfpLobeProfileCurve, "HPFP Lobe Profile" + columnLabel = "% pump volume", "angle" + xAxis = 0, 100, 11 + yAxis = 0, 240, 13 + xBins = hpfpLobeProfileQuantityBins + yBins = hpfpLobeProfileAngle + + curve = hpfpDeadtimeCurve, "HPFP Valve Deadtime" + columnLabel = "volts", "ms" + xAxis = 5, 15, 11 + yAxis = 0, 5, 6 + xBins = hpfpDeadtimeVoltsBins + yBins = hpfpDeadtimeMS + + curve = wwTauCltCurve, "Evap time vs. CLT" + columnLabel = "coolant", "seconds" + xAxis = -40, 120, 9 + yAxis = 0, 2, 9 + xBins = wwCltBins, coolant + yBins = wwTauCltValues + gauge = CLTGauge + + curve = wwTauMapCurve, "Evap time vs. MAP" + columnLabel = "MAP", "mult" + xAxis = 0, 100, 5 + yAxis = 0, 2, 9 + xBins = wwMapBins, MAPValue + yBins = wwTauMapValues + gauge = MAPGauge + + curve = wwBetaCltCurve, "Impact fraction vs. CLT" + columnLabel = "coolant", "fraction" + xAxis = -40, 120, 9 + yAxis = 0, 2, 9 + xBins = wwCltBins, coolant + yBins = wwBetaCltValues + gauge = CLTGauge + + curve = wwBetaMapCurve, "Impact fraction vs. MAP" + columnLabel = "MAP", "mult" + xAxis = 0, 100, 5 + yAxis = 0, 2, 9 + xBins = wwMapBins, MAPValue + yBins = wwBetaMapValues + gauge = MAPGauge + + curve = tchargeCurve, "Charge temperature estimation coefficient" + columnLabel = "flow", "coefficient" + xAxis = 0, 500, 6 + yAxis = 0, 100, 5 + xBins = tchargeBins, mafEstimate + yBins = tchargeValues + gauge = tChargeGauge + + curve = tccLockCurve, "TCC Lock Curve" + columnLabel = "TPS", "Lock Speed", "Unlock Speed" + xAxis = 0, 100, 10 + yAxis = 0, 100, 10 + xBins = tcu_tccTpsBins, TPSValue + yBins = tcu_tccLockSpeed + yBins = tcu_tccUnlockSpeed + gauge = TPSGauge + + curve = pcPerGearCurve, "Transmission Line Pressure Control" + columnLabel = "Airmass", "" + xAxis = 0, 5, 10 + yAxis = 0, 100, 10 + xBins = tcu_pcAirmassBins, chargeAirMass + yBins = tcu_pcValsR + yBins = tcu_pcValsN + yBins = tcu_pcVals1 + yBins = tcu_pcVals2 + yBins = tcu_pcVals3 + yBins = tcu_pcVals4 + lineLabel = "R%" + lineLabel = "N%" + lineLabel = "1%" + lineLabel = "2%" + lineLabel = "3%" + lineLabel = "4%" + +curve = pcPerShiftCurve, "Transmission Line Pressure Control - Shift" + columnLabel = "Airmass", "" + xAxis = 0, 5, 10 + yAxis = 0, 100, 10 + xBins = tcu_pcAirmassBins, chargeAirMass + yBins = tcu_pcVals12 + yBins = tcu_pcVals23 + yBins = tcu_pcVals34 + yBins = tcu_pcVals21 + yBins = tcu_pcVals32 + yBins = tcu_pcVals43 + lineLabel = "1->2%" + lineLabel = "2->3%" + lineLabel = "3->4%" + lineLabel = "2->1%" + lineLabel = "3->2%" + lineLabel = "4->3%" + +curve = 32Curve, "3-2 Shift Solenoid Percent by Speed" + columnLabel = "Speed", "%" + xAxis = 0, 200, 20 + yAxis = 0, 100, 10 + xBins = tcu_32SpeedBins, vehicleSpeedKph + yBins = tcu_32Vals + +curve = rangeMatrix, "Range Switch Input Matrix" + columnLabel = "Pin", "" + xAxis = 0, 6, 6 + yAxis = 0, 3, 3 + xBins = rangeInputArray + yBins = tcu_rangeP + yBins = tcu_rangeR + yBins = tcu_rangeN + yBins = tcu_rangeD + yBins = tcu_rangeM + yBins = tcu_rangeM3 + yBins = tcu_rangeM2 + yBins = tcu_rangeM1 + yBins = tcu_rangePlus + yBins = tcu_rangeMinus + yBins = tcu_rangeLow + lineLabel = "Park" + lineLabel = "Reverse" + lineLabel = "Neutral" + lineLabel = "Drive" + lineLabel = "Manual" + lineLabel = "Manual 3rd" + lineLabel = "Manual 2nd" + lineLabel = "Manual 1st" + lineLabel = "Manual +" + lineLabel = "Manual -" + lineLabel = "Low" + + curve = ignAdder1Bias, "Ignition adder 1 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = ignBlends1_blendBins, ignBlendParameter1 + yBins = ignBlends1_blendValues + + curve = ignAdder2Bias, "Ignition adder 2 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = ignBlends2_blendBins, ignBlendParameter2 + yBins = ignBlends2_blendValues + + curve = ignAdder3Bias, "Ignition adder 3 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = ignBlends3_blendBins, ignBlendParameter3 + yBins = ignBlends3_blendValues + + curve = ignAdder4Bias, "Ignition adder 4 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = ignBlends4_blendBins, ignBlendParameter4 + yBins = ignBlends4_blendValues + + curve = veBlend1Bias, "VE blend 1 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = veBlends1_blendBins, veBlendParameter1 + yBins = veBlends1_blendValues + + curve = veBlend2Bias, "VE blend 2 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = veBlends2_blendBins, veBlendParameter2 + yBins = veBlends2_blendValues + + curve = veBlend3Bias, "VE blend 3 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = veBlends3_blendBins, veBlendParameter3 + yBins = veBlends3_blendValues + + curve = veBlend4Bias, "VE blend 4 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = veBlends4_blendBins, veBlendParameter4 + yBins = veBlends4_blendValues + + curve = boostOpenLoopBlend1Bias, "Boost open loop blend 1 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = boostOpenLoopBlends1_blendBins, boostOpenLoopBlendParameter1 + yBins = boostOpenLoopBlends1_blendValues + + curve = boostOpenLoopBlend2Bias, "Boost open loop blend 2 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = boostOpenLoopBlends2_blendBins, boostOpenLoopBlendParameter2 + yBins = boostOpenLoopBlends2_blendValues + + curve = boostClosedLoopBlend1Bias, "Boost Closed loop blend 1 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = boostClosedLoopBlends1_blendBins, boostClosedLoopBlendParameter1 + yBins = boostClosedLoopBlends1_blendValues + + curve = boostClosedLoopBlend2Bias, "Boost Closed loop blend 2 bias" + columnLabel = "param", "bias" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = boostClosedLoopBlends2_blendBins, boostClosedLoopBlendParameter2 + yBins = boostClosedLoopBlends2_blendValues + + curve = throttleEffectiveArea, "Throttle effective area" + columnLabel = "TPS", "normalized flow" + xAxis = 0, 100, 11 + yAxis = 0, 2, 5 + xBins = throttleEstimateEffectiveAreaBins, TPSValue + yBins = throttleEstimateEffectiveAreaValues + gauge = TPSGauge + + curve = boostOpenLoopGearAdderCurve, "Boost Open Loop gear-based adder" + columnLabel = "Gear", "duty cycle" + xAxis = 0, 100, 11 + yAxis = 0, 100, 5 + xBins = gearCountArray, tcuCurrentGear + yBins = gearBasedOpenLoopBoostAdder + +[TableEditor] + ; table_id, map3d_id, "title", page + +; move table into a panel? or find a way to add a link to https://rusefi.com/s/tpstps https://github.com/rusefi/rusefi/issues/5130 + table = tpsTpsAccelTbl, tpsTpsAccelMap, "TPS/TPS Acceleration Extra Fuel(ms)", 1 + topicHelp = "tpstpsHelp" + xBins = tpsTpsAccelFromRpmBins, TPSValue + yBins = tpsTpsAccelToRpmBins, TPSValue + zBins = tpsTpsAccelTable + + table = boostTableTbl, boostMapOpen, "Boost control duty cycle (open loop)", 1 + xBins = boostRpmBins, RPMValue + yBins = boostTpsBins, TPSValue + zBins = boostTableOpenLoop + + table = boostTable2Tbl, boostMapClosed, "Boost control target (kPa)", 1 + xBins = boostRpmBins, RPMValue + yBins = boostTpsBins, TPSValue + zBins = boostTableClosedLoop + + table = vvtTable1Tbl, vvtTable1Map, "Intake VVT closed loop Target", 1 + xBins = vvtTable1RpmBins, RPMValue + yBins = vvtTable1LoadBins, fuelingLoad + zBins = vvtTable1 + + table = vvtTable2Tbl, vvtTable2Map, "Exhaust VVT closed loop Target", 1 + xBins = vvtTable2RpmBins, RPMValue + yBins = vvtTable2LoadBins, fuelingLoad + zBins = vvtTable2 + + + table = scriptTable1Tbl, scriptTable1Map, "Script Table #1", 1 + xBins = scriptTable1RpmBins, RPMValue + yBins = scriptTable1LoadBins, fuelingLoad + zBins = scriptTable1 + + table = scriptTable2Tbl, scriptTable2Map, "Script Table #2", 1 + xBins = scriptTable2RpmBins, RPMValue + yBins = scriptTable2LoadBins, fuelingLoad + zBins = scriptTable2 + + table = scriptTable3Tbl, scriptTable3Map, "Script Table #3", 1 + xBins = scriptTable3RpmBins, RPMValue + yBins = scriptTable3LoadBins, fuelingLoad + zBins = scriptTable3 + + table = scriptTable4Tbl, scriptTable4Map, "Script Table #4", 1 + xBins = scriptTable4RpmBins, RPMValue + yBins = scriptTable4LoadBins, fuelingLoad + zBins = scriptTable4 + + table = IgnRetardTableALS, IgnRetardALS, "Ignition adjustment", 1 + xBins = alsIgnRetardrpmBins, RPMValue + yBins = alsIgnRetardLoadBins, TPSValue + zBins = ALSTimingRetardTable + gridHeight = 4.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = FuelAdderTableALS, FuelAdderALS, "Fuel adjustment", 1 + xBins = alsFuelAdjustmentrpmBins, RPMValue + yBins = alsFuelAdjustmentLoadBins, TPSValue + zBins = ALSFuelAdjustment + gridHeight = 4.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = IgnSkipTableALS, IgnSkipALS, "Ignition Skip", 1 + ; constant, variable + xBins = alsIgnSkiprpmBins, RPMValue + yBins = alsIgnSkipLoadBins, TPSValue + zBins = ALSIgnSkipTable + gridHeight = 4.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = baroCorrTbl, baroCorrMap, "Baro Correction", 1 + xyLabels = "RPM", "Ignition Load" + xBins = baroCorrRpmBins, RPMValue + yBins = baroCorrPressureBins, baroPressure + zBins = baroCorrTable + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = ignitionTableTbl, ignitionTableMap, "Ignition Table", 1 + xyLabels = "RPM", "Ignition Load" + xBins = ignitionRpmBins, RPMValue + yBins = ignitionLoadBins, ignitionLoad + zBins = ignitionTable + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = ignAdder1Table, ignAdder1Map, "Ignition adder 1", 1 + xyLabels = "RPM", "Ignition Load" + xBins = ignBlends1_rpmBins, RPMValue + yBins = ignBlends1_loadBins, ignitionLoad + zBins = ignBlends1_table + gridOrient = 250, 0, 340 + + table = ignAdder2Table, ignAdder2Map, "Ignition adder 2", 1 + xyLabels = "RPM", "Ignition Load" + xBins = ignBlends2_rpmBins, RPMValue + yBins = ignBlends2_loadBins, ignitionLoad + zBins = ignBlends2_table + gridOrient = 250, 0, 340 + + table = ignAdder3Table, ignAdder3Map, "Ignition adder 3", 1 + xyLabels = "RPM", "Ignition Load" + xBins = ignBlends3_rpmBins, RPMValue + yBins = ignBlends3_loadBins, ignitionLoad + zBins = ignBlends3_table + gridOrient = 250, 0, 340 + + table = ignAdder4Table, ignAdder4Map, "Ignition adder 4", 1 + xyLabels = "RPM", "Ignition Load" + xBins = ignBlends4_rpmBins, RPMValue + yBins = ignBlends4_loadBins, ignitionLoad + zBins = ignBlends4_table + gridOrient = 250, 0, 340 + + table = veBlend1Table, veBlend1Map, "VE blend 1", 1 + xyLabels = "RPM", "Fueling Load" + xBins = veBlends1_rpmBins, RPMValue + yBins = veBlends1_loadBins, fuelingLoad + zBins = veBlends1_table + gridOrient = 250, 0, 340 + + table = veBlend2Table, veBlend2Map, "VE blend 2", 1 + xyLabels = "RPM", "Fueling Load" + xBins = veBlends2_rpmBins, RPMValue + yBins = veBlends2_loadBins, fuelingLoad + zBins = veBlends2_table + gridOrient = 250, 0, 340 + + table = veBlend3Table, veBlend3Map, "VE blend 3", 1 + xyLabels = "RPM", "Fueling Load" + xBins = veBlends3_rpmBins, RPMValue + yBins = veBlends3_loadBins, fuelingLoad + zBins = veBlends3_table + gridOrient = 250, 0, 340 + + table = veBlend4Table, veBlend4Map, "VE blend 4", 1 + xyLabels = "RPM", "Fueling Load" + xBins = veBlends4_rpmBins, RPMValue + yBins = veBlends4_loadBins, fuelingLoad + zBins = veBlends4_table + gridOrient = 250, 0, 340 + + table = boostOpenBlend1Table, boostOpenBlend1Map, "Boost open loop blend 1", 1 + xyLabels = "RPM", "TPS" + xBins = boostOpenLoopBlends1_rpmBins, RPMValue + yBins = boostOpenLoopBlends1_loadBins, TPSValue + zBins = boostOpenLoopBlends1_table + gridOrient = 250, 0, 340 + + table = boostOpenBlend2Table, boostOpenBlend2Map, "Boost open loop blend 2", 1 + xyLabels = "RPM", "TPS" + xBins = boostOpenLoopBlends2_rpmBins, RPMValue + yBins = boostOpenLoopBlends2_loadBins, TPSValue + zBins = boostOpenLoopBlends2_table + gridOrient = 250, 0, 340 + + table = boostClosedBlend1Table, boostClosedBlend1Map, "Boost closed loop blend 1", 1 + xyLabels = "RPM", "TPS" + xBins = boostClosedLoopBlends1_rpmBins, RPMValue + yBins = boostClosedLoopBlends1_loadBins, TPSValue + zBins = boostClosedLoopBlends1_table + gridOrient = 250, 0, 340 + + table = boostClosedBlend2Table, boostClosedBlend2Map, "Boost closed loop blend 2", 1 + xyLabels = "RPM", "TPS" + xBins = boostClosedLoopBlends2_rpmBins, RPMValue + yBins = boostClosedLoopBlends2_loadBins, TPSValue + zBins = boostClosedLoopBlends2_table + gridOrient = 250, 0, 340 + + table = ignitionIatCorrTableTbl, ignitionIatCorrTableMap, "Ignition Intake Air Temp correction", 1 + xyLabels = "Air Temp", "Ignition Load" + xBins = ignitionIatCorrTempBins, intake + yBins = ignitionIatCorrLoadBins, ignitionLoad + zBins = ignitionIatCorrTable +; gridHeight = 2.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = torqueTableTbl, torqueTableMap, "Engine Torque", 1 + xBins = torqueRpmBins, RPMValue + yBins = torqueLoadBins, veTableYAxis + zBins = torqueTable + + table = veTableTbl, veTableMap, "VE Table", 1 + xyLabels = "RPM", "load" + xBins = veRpmBins, RPMValue + yBins = veLoadBins, veTableYAxis + zBins = veTable +; gridHeight = 2.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = idleVeTableTbl, idleVeTable, "Idle VE" + xyLabels = "RPM", "load" + xBins = idleVeRpmBins, RPMValue + yBins = idleVeLoadBins, veTableYAxis + zBins = idleVeTable + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl1, fuelTrimMap1, "Fuel trim cyl 1", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims1_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl2, fuelTrimMap2, "Fuel trim cyl 2", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims2_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl3, fuelTrimMap3, "Fuel trim cyl 3", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims3_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl4, fuelTrimMap4, "Fuel trim cyl 4", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims4_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl5, fuelTrimMap5, "Fuel trim cyl 5", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims5_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl6, fuelTrimMap6, "Fuel trim cyl 6", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims6_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl7, fuelTrimMap7, "Fuel trim cyl 7", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims7_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl8, fuelTrimMap8, "Fuel trim cyl 8", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims8_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl9, fuelTrimMap9, "Fuel trim cyl 9", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims9_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl10, fuelTrimMap10, "Fuel trim cyl 10", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims10_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl11, fuelTrimMap11, "Fuel trim cyl 11", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims11_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = fuelTrimTbl12, fuelTrimMap12, "Fuel trim cyl 12", 1 + xBins = fuelTrimRpmBins, RPMValue + yBins = fuelTrimLoadBins, veTableYAxis + zBins = fuelTrims12_table + upDownLabel = "(RICHER)", "(LEANER)" + + table = ignTrimTbl1, ignTrimMap1, "Ign trim cyl 1", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims1_table + + table = ignTrimTbl2, ignTrimMap2, "Ign trim cyl 2", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims2_table + + table = ignTrimTbl3, ignTrimMap3, "Ign trim cyl 3", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims3_table + + table = ignTrimTbl4, ignTrimMap4, "Ign trim cyl 4", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims4_table + + table = ignTrimTbl5, ignTrimMap5, "Ign trim cyl 5", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims5_table + + table = ignTrimTbl6, ignTrimMap6, "Ign trim cyl 6", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims6_table + + table = ignTrimTbl7, ignTrimMap7, "Ign trim cyl 7", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims7_table + + table = ignTrimTbl8, ignTrimMap8, "Ign trim cyl 8", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims8_table + + table = ignTrimTbl9, ignTrimMap9, "Ign trim cyl 9", 1 + xBins =ignTrimRpmBins, RPMValue + yBins =ignTrimLoadBins, ignitionLoad + zBins =ignTrims9_table + + table = ignTrimTbl10, ignTrimMap10, "Ign trim cyl 10", 1 + xBins = ignTrimRpmBins, RPMValue + yBins = ignTrimLoadBins, ignitionLoad + zBins = ignTrims10_table + + table = ignTrimTbl11, ignTrimMap11, "Ign trim cyl 11", 1 + xBins = ignTrimRpmBins, RPMValue + yBins = ignTrimLoadBins, ignitionLoad + zBins = ignTrims11_table + + table = ignTrimTbl12, ignTrimMap12, "Ign trim cyl 12", 1 + xBins = ignTrimRpmBins, RPMValue + yBins = ignTrimLoadBins, ignitionLoad + zBins = ignTrims12_table + + table = mapEstimateTableTbl, mapEstimateTableMap, "MAP Estimate", 1 + xBins = mapEstimateRpmBins, RPMValue + yBins = mapEstimateTpsBins, TPSValue + zBins = mapEstimateTable + + table = injPhaseTableTbl, injPhaseTableMap, "Injection Phase", 1 + topicHelp = "fuelHelp" + xBins = injPhaseRpmBins, RPMValue + yBins = injPhaseLoadBins, fuelingLoad + zBins = injectionPhase +; gridHeight = 2.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(Later)", "(Sooner)" + + table = pedalToTpsTbl, pedalToTpsMap, "ETB Pedal to TPS", 1 + xBins = pedalToTpsRpmBins, RPMValue + yBins = pedalToTpsPedalBins, throttlePedalPosition + zBins = pedalToTpsTable +; gridHeight = 2.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(Later)", "(Sooner)" + + table = throttle2TrimTbl, throttle2TrimMap, "ETB #2 Trim", 1 + xBins = throttle2TrimRpmBins, RPMValue + yBins = throttle2TrimTpsBins, TPSValue + zBins = throttle2TrimTable + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + + table = maxKnockRetardTbl, maxKnockRetardMap, "Max knock retard", 1 + xBins = maxKnockRetardRpmBins, RPMValue + yBins = maxKnockRetardLoadBins, TPSValue + zBins = maxKnockRetardTable + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + +#if LAMBDA + table = lambdaTableTbl, lambdaTableMap, "Target Lambda Table", 1 +#else + table = afrTableTbl, afrTableMap, "Target AFR Table", 1 +#endif + xBins = lambdaRpmBins, RPMValue + yBins = lambdaLoadBins, afrTableYAxis + zBins = lambdaTable +; gridHeight = 2.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(RICHER)", "(LEANER)" + + table = lambdaMaxDeviationTableTbl, lambdaMaxDeviationTableMap, "Maximum Lambda Deviation", 1 + xyLabels = "RPM", "" + xBins = lambdaMaxDeviationRpmBins, RPMValue + yBins = lambdaMaxDeviationLoadBins, afrTableYAxis + zBins = lambdaMaxDeviationTable + + table = iacPidMultTbl, iacPidMultMap, "IAC PID Multiplier Table", 1 + xBins = iacPidMultRpmBins, RPMValue + yBins = iacPidMultLoadBins, fuelingLoad + zBins = iacPidMultTable +; gridHeight = 2.0 + gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees. + upDownLabel = "(Later)", "(Sooner)" + + table = gppwm1Tbl, gppwm1Map, "GP#1", 1 + xyLabels = "RPM", "" + xBins = gppwm1_rpmBins, gppwmXAxis1 + yBins = gppwm1_loadBins, gppwmYAxis1 + zBins = gppwm1_table + + table = gppwm2Tbl, gppwm2Map, "GP#2", 1 + xyLabels = "RPM", "" + xBins = gppwm2_rpmBins, gppwmXAxis2 + yBins = gppwm2_loadBins, gppwmYAxis2 + zBins = gppwm2_table + + table = gppwm3Tbl, gppwm3Map, "GP#3", 1 + xyLabels = "RPM", "" + xBins = gppwm3_rpmBins, gppwmXAxis3 + yBins = gppwm3_loadBins, gppwmYAxis3 + zBins = gppwm3_table + + table = gppwm4Tbl, gppwm4Map, "GP#4", 1 + xyLabels = "RPM", "" + xBins = gppwm4_rpmBins, gppwmXAxis4 + yBins = gppwm4_loadBins, gppwmYAxis4 + zBins = gppwm4_table + + table = tcuSolenoidTableTbl, tcuSolenoidTableMap, "Solenoids Active By Gear", 1 + xBins = gearCountArray, tcuCurrentGear + yBins = solenoidCountArray, tcuCurrentGear + zBins = tcuSolenoidTable + xyLabels = "Solenoid", "Gear" + + table = hpfpTargetTable, hpfpTargetTableId, "HPFP Target Fuel Pressure", 1 + xBins = hpfpTargetRpmBins, RPMValue + yBins = hpfpTargetLoadBins, veTableYAxis + zBins = hpfpTarget + + table = hpfpCompensationTable, hpfpCompensationTableId, "HPFP Pump Compensation Factor", 1 + xBins = hpfpCompensationRpmBins, RPMValue + yBins = hpfpCompensationLoadBins, running_fuel + zBins = hpfpCompensation + + table = postCrankingEnrichmentTbl, postCrankingEnrichmentMap, "After start enrichment", 1 + xyLabels = "Engine Cycles", "Coolant Temp" + xBins = postCrankingDurationBins, revolutionCounterSinceStart + yBins = postCrankingCLTBins, coolant + zBins = postCrankingFactor + + +[GaugeConfigurations] + gaugeCategory = "Sync" +triggerVvt2FallGauge = triggerVvt2Fall,"triggerVvt2Fall", "", 0.0,3000.0, 0.0,3000.0, 0.0,3000.0, 0,0 +triggerVvt2RiseGauge = triggerVvt2Rise,"triggerVvt2Rise", "", 0.0,3000.0, 0.0,3000.0, 0.0,3000.0, 0,0 +currentEngineDecodedPhaseGauge = currentEngineDecodedPhase,"Sync: Engine Phase", "deg", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 + gaugeCategory = "Fuel: math" +totalFuelCorrectionGauge = totalFuelCorrection,"Fuel: Total correction", "mult", 0.0,3.0, 0.0,3.0, 0.0,3.0, 2,2 +running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_ timeSinceCrankingInSecs", "secs", 0.0,600000.0, 0.0,600000.0, 0.0,600000.0, 0,0 +targetLambdaGauge = targetLambda,"Fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2 +targetAFRGauge = targetAFR,"Fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2 + gaugeCategory = "Timing" +baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1 +sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1 +dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1 +cltTimingCorrectionGauge = cltTimingCorrection,"Ign: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2 +timingIatCorrectionGauge = timingIatCorrection,"Ign: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2 +timingPidCorrectionGauge = timingPidCorrection,"Idle: Timing adjustment", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2 +luaTimingAddGauge = luaTimingAdd,"Ign: Lua timing add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2 +luaTimingMultGauge = luaTimingMult,"Ign: Lua timing mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2 + gaugeCategory = "Boost Control" +luaTargetAddGauge = luaTargetAdd,"Boost: Lua target add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1 +boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2 +luaTargetMultGauge = luaTargetMult,"Boost: Lua target mult", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1 +openLoopPartGauge = openLoopPart,"Boost: Open loop", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1 +luaOpenLoopAddGauge = luaOpenLoopAdd,"Boost: Lua open loop add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1 +boostControllerClosedLoopPartGauge = boostControllerClosedLoopPart,"Boost: Closed loop", "%", -50.0,50.0, -50.0,50.0, -50.0,50.0, 1,1 +boostControlTargetGauge = boostControlTarget,"Boost: Target", "kPa", 0.0,300.0, 0.0,300.0, 0.0,300.0, 1,1 + gaugeCategory = "ETB more" +idlePositionGauge = idlePosition,"ETB: idlePosition", "per", 0.0,10.0, 0.0,10.0, 0.0,10.0, 2,2 +luaAdjustmentGauge = luaAdjustment,"ETB: luaAdjustment", "per", 0.0,3.0, 0.0,3.0, 0.0,3.0, 2,2 +m_wastegatePositionGauge = m_wastegatePosition,"DC: wastegatePosition", "per", 0.0,3.0, 0.0,3.0, 0.0,3.0, 2,2 +etbDutyRateOfChangeGauge = etbDutyRateOfChange,"ETB duty rate of change", "per", 0.0,25.0, 0.0,25.0, 0.0,25.0, 2,2 +etbDutyAverageGauge = etbDutyAverage,"ETB average duty", "per", -20.0,50.0, -20.0,50.0, -20.0,50.0, 2,2 +etbTpsErrorCounterGauge = etbTpsErrorCounter,"ETB TPS error counter", "count", 0.0,3.0, 0.0,3.0, 0.0,3.0, 0,0 +etbPpsErrorCounterGauge = etbPpsErrorCounter,"ETB pedal error counter", "count", 0.0,3.0, 0.0,3.0, 0.0,3.0, 0,0 +dcOutput0Gauge = dcOutput0,"DC: output0", "per", 0.0,10.0, 0.0,10.0, 0.0,10.0, 2,2 +isEnabled0_intGauge = isEnabled0_int,"DC: en0", "per", 0.0,10.0, 0.0,10.0, 0.0,10.0, 2,2 +value0Gauge = value0,"ETB: SENT value0", "value", 0.0,3.0, 0.0,3.0, 0.0,3.0, 0,0 +value1Gauge = value1,"ETB: SENT value1", "value", 0.0,3.0, 0.0,3.0, 0.0,3.0, 0,0 +errorRateGauge = errorRate,"ETB: SENT error rate", "ratio", 0.0,3.0, 0.0,3.0, 0.0,3.0, 2,2 + + +gaugeCategory = Trigger + triggerErrorsCounterGauge = totalTriggerErrorCounter, "Trigger error count", "count", 0, 15000, 0, 0, 6000, 6000, 0, 0 + triggerSyncGapRatioGauge = triggerSyncGapRatio,"triggerSyncGapRatio", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerStateIndexGauge = triggerStateIndex,"triggerStateIndex", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + vvtSyncGapRatioGauge = vvtSyncGapRatio,"vvtSyncGapRatio", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + vvtStateIndexGauge = vvtStateIndex,"vvtStateIndex", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerPrimaryFallGauge = triggerPrimaryFall,"triggerPrimaryFall", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerPrimaryRiseGauge = triggerPrimaryRise,"triggerPrimaryRise", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerSecondaryFallGauge = triggerSecondaryFall,"triggerSecondaryFall", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerSecondaryRiseGauge = triggerSecondaryRise,"triggerSecondaryRise", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerVvtFallGauge = triggerVvtFall,"triggerVvtFall", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerVvtRiseGauge = triggerVvtRise,"triggerVvtRise", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerVvt2FallGauge = triggerVvt2Fall,"triggerVvt2Fall", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + triggerVvt2RiseGauge = triggerVvt2Rise,"triggerVvt2Rise", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + currentEnginePhaseGauge = currentEngineDecodedPhase, "Engine Phase", "deg", 0, 720, 0, 0, 720, 720, 0, 0 + +gaugeCategory = Test Bench + testBenchIterGauge = testBenchIter, "Test Bench Iterations", "count", -10, {benchTestCount + 10}, -5, 0, {benchTestCount}, {benchTestCount + 5}, 1, 1 + +gaugeCategory = LUA + luaInvocationCounterGauge = luaInvocationCounter,"luaInvocationCounter", "count", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 + luaLastCycleDurationGauge = luaLastCycleDuration,"luaLastCycleDuration", "nt", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 + luaGauges1gauge = luaGauges1, "Lua Gauge 1", "lua", 0, 30000, 0, 0, 30000, 30000, 0, 3 + luaGauges2gauge = luaGauges2, "Lua Gauge 2", "lua", 0, 30000, 0, 0, 30000, 30000, 0, 3 + +gaugeCategory = Alternator PID + alternatorStatus_iTermGauge = alternatorStatus_iTerm,"Alternator PID iTerm", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + alternatorStatus_dTermGauge = alternatorStatus_dTerm,"Alternator PID dTerm", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + alternatorStatus_outputGauge = alternatorStatus_output,"Alternator PID output", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + alternatorStatus_errorGauge = alternatorStatus_error,"Alternator PID error", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + alternatorStatus_resetCounterGauge = alternatorStatus_resetCounter,"Alternator PID resetCounter", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 0,0 + +gaugeCategory = Boost PID + boostStatus_iTermGauge = boostStatus_iTerm,"Boost PID iTerm", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + boostStatus_dTermGauge = boostStatus_dTerm,"Boost PID dTerm", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + boostStatus_outputGauge = boostStatus_output,"Boost PID output", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + boostStatus_errorGauge = boostStatus_error,"Boost PID error", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + boostStatus_resetCounterGauge = boostStatus_resetCounter,"Boost PID resetCounter", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 0,0 + +gaugeCategory = Idle + idlePosSensGauge = idlePositionSensor, "Idle: Position sensor", "%", 0, 100, 0, 0, 100, 100, 1, 1 + idleAirValvePositionGauge = currentIdlePosition, "Idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1 + idleStatus_iTermGauge = idleStatus_iTerm,"Idle PID iTerm", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + idleStatus_dTermGauge = idleStatus_dTerm,"Idle PID dTerm", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + idleStatus_outputGauge = idleStatus_output,"Idle PID output", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + idleStatus_errorGauge = idleStatus_error,"Idle PID error", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 3,3 + idleStatus_resetCounterGauge = idleStatus_resetCounter,"Idle PID resetCounter", "", -10000.0,10000.0, -10000.0,10000.0, -10000.0,10000.0, 0,0 + +gaugeCategory = Etb PID + etbStatus_iTermGauge = etbStatus_iTerm,"ETB 1 PID iTerm", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + etbStatus_dTermGauge = etbStatus_dTerm,"ETB 1 PID dTerm", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + etbStatus_outputGauge = etbStatus_output,"ETB 1 PID output", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + etbStatus_errorGauge = etbStatus_error,"ETB 1 PID error", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + etbStatus_resetCounterGauge = etbStatus_resetCounter,"ETB 1 PID resetCounter", "", 0,100.0, 0,100.0, 0,100.0, 0,0 + + wgStatus_iTermGauge = wastegateDcStatus_iTerm,"WG PID iTerm", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + wgStatus_dTermGauge = wastegateDcStatus_dTerm,"WG PID dTerm", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + wgStatus_outputGauge = wastegateDcStatus_output,"WG PID output", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + wgStatus_errorGauge = wastegateDcStatus_error,"WG PID error", "", -100.0,100.0, -100.0,100.0, -100.0,100.0, 3,3 + wgStatus_resetCounterGauge = wastegateDcStatus_resetCounter,"WG PID resetCounter", "", 0,100.0, 0,100.0, 0,100.0, 0,0 + +gaugeCategory = CAN + canReadCounterGauge = canReadCounter,"CAN: Rx", "", 0,64000, 0,64000, 0,64000, 0,0 + canWriteOkGauge = canWriteOk,"CAN: Tx OK", "", 0,64000, 0,64000, 0,64000, 0,0 + canWriteNotOkGauge = canWriteNotOk,"CAN: Tx err", "", 0,64000, 0,64000, 0,64000, 0,0 + +gaugeCategory = GDI + di_nextStartGauge = di_nextStart,"DI: next start", "v", 0.0,100.0, 0.0,100.0, 0.0,100.0, 0,0 + m_requested_pumpGauge = m_requested_pump,"DI: Pump Angle", "deg", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 + fuel_requested_percentGauge = fuel_requested_percent,"DI: fuel_requested_percent", "v", 0.0,100.0, 0.0,100.0, 0.0,100.0, 0,0 + fuel_requested_percent_piGauge = fuel_requested_percent_pi,"DI: fuel_requested_percent_pi", "v", 0.0,100.0, 0.0,100.0, 0.0,100.0, 0,0 + ;todo see comment in HpfpQuantity class definition + ;m_I_sum_percentGauge = m_I_sum_percent,"DI: m_I_sum_percent", "v", 0.0,100.0, 0.0,100.0, 0.0,100.0, 0,0 + ;m_pressureTarget_kPaGauge = m_pressureTarget_kPa,"DI: m_pressureTarget_kPa", "v", 0.0,100.0, 0.0,100.0, 0.0,100.0, 0,0 + highFuelPressureGauge = highFuelPressure, "Fuel pressure (high)", "bar", 0, 200, 0, 0, 200, 200, 1, 0 + +gaugeCategory = ECU Status + warningCounterGauge = warningCounter, "Warning: counter", "", 0, 100, 0, 0, 100, 100, 0, 0 + lastErrorCodeGauge = lastErrorCode, "Last error", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode1Gauge = recentErrorCode1, "Error#1", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode2Gauge = recentErrorCode2, "Error#2", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode3Gauge = recentErrorCode3, "Error#3", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode4Gauge = recentErrorCode4, "Error#4", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode5Gauge = recentErrorCode5, "Error#5", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode6Gauge = recentErrorCode6, "Error#6", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode7Gauge = recentErrorCode7, "Error#7", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + recentErrorCode8Gauge = recentErrorCode8, "Error#8", "", 0, 18000, 0, 0, 18000, 18000, 0, 0 + firmwareVersionGauge = firmwareVersion , "ECU Software Version", "%", 0, 100, 0, 0, 100, 100, 0, 0 + timeSecondsGauge = seconds, "Uptime", "sec", 0, 100, 0, 0, 100, 100, 0, 0 + tuneCrc16Gauge = tuneCrc16, "Tune CRC16", "", 0, 64000, 0, 0, 64000, 64000, 0, 0 + +gaugeCategory = Debug + debugF1Gauge = debugFloatField1, {bitStringValue( debugFieldF1List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 4, 4 + debugF2Gauge = debugFloatField2, {bitStringValue( debugFieldF2List, debugMode )}, "", -100, 100, 0, 0, 100, 100, 4, 4 + debugF3Gauge = debugFloatField3, {bitStringValue( debugFieldF3List, debugMode )}, "", -100, 100, 0, 0, 100, 100, 4, 4 + debugF4Gauge = debugFloatField4, {bitStringValue( debugFieldF4List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 4, 4 + debugF5Gauge = debugFloatField5, {bitStringValue( debugFieldF5List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 4, 4 + debugF6Gauge = debugFloatField6, {bitStringValue( debugFieldF6List, debugMode )}, "", -100, 100, 0, 0, 100, 100, 4, 4 + debugF7Gauge = debugFloatField7, {bitStringValue( debugFieldF7List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 4, 4 + debugI1Gauge = debugIntField1, {bitStringValue( debugFieldI1List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 0, 0 + debugI2Gauge = debugIntField2, {bitStringValue( debugFieldI2List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 0, 0 + debugI3Gauge = debugIntField3, {bitStringValue( debugFieldI3List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 0, 0 + debugI4Gauge = debugIntField4, {bitStringValue( debugFieldI4List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 0, 0 + debugI5Gauge = debugIntField5, {bitStringValue( debugFieldI5List, debugMode )}, "", 0, 100, 0, 0, 100, 100, 0, 0 + +gaugeCategory = Sensors - Basic + RPMGauge = RPMValue, "RPM - engine speed", "RPM", 0, {rpmHardLimit + 2000}, 200, {cranking_rpm}, {rpmHardLimit - 500}, {rpmHardLimit}, 0, 0 + CLTGauge = coolant, "Coolant temp", "C", -40, 140, -15, 1, 95, 110, 1, 1 + IATGauge = intake, "Intake air temp", "C", -40, 140, -15, 1, 95, 110, 1, 1 + afr1Gauge = AFRValue, "Air/Fuel Ratio", "", 10, 19.4, 12, 13, 15, 16, 2, 2 + afr2Gauge = AFRValue2, "Air/Fuel Ratio 2", "", 10, 19.4, 12, 13, 15, 16, 2, 2 + afrGasScale1Gauge = AFRValue, "Air/Fuel Ratio (Gas Scale)", "", 10, 19.4, 12, 13, 15, 16, 2, 2 + afrGasScale2Gauge = AFRValue2, "Air/Fuel Ratio 2 (Gas Scale)", "", 10, 19.4, 12, 13, 15, 16, 2, 2 + lambda1Gauge = lambdaValue, "Lambda", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 + lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 + VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 + MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + + ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld +gaugeCategory = Sensors - Extra 1 + VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 + turboSpeedGauge = turboSpeed, "Turbocharger Speed", "hz", 0, 200, 0, 1, 3, 4, 1, 1 + baroPressureGauge = baroPressure, "Barometric pressure", "kPa", 0, 1024, 0, 0, 0, 0, 0, 0 + internalMcuTemperatureGauge = internalMcuTemperature, "ECU temperature", "C", 0, 100, 0, 0, 75, 100, 0, 0 + OilPressGauge = oilPressure, "Oil Pressure", "kPa", 0, 750, 35, 75, 550, 700, 0, 0 + AuxT1Gauge = auxTemp1, "Aux temp 1", "C", -40, 140, -15, 1, 95, 110, 1, 1 + AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 + lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 + flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 + fuelTempGauge = fuelTemp, "Fuel Temperature", "C", 0, 100, 0, 0, 75, 100, 0, 0 + fuelTankLevelGauge = fuelTankLevel,"Fuel level", "%", 0, 100, 10, 20, 100, 100, 1, 1 + AuxL1Gauge = auxLinear1, "Aux linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 + +gaugeCategory = Sensors - Extra 2 + accelerationLatGauge = accelerationLat, "Accel: Lateral", "acc", -2, 2, -2, -1, 1, 2, 3, 1 + accelerationLonGauge = accelerationLon, "Accel: Longitudinal", "acc", -2, 2, -2, -1, 1, 2, 3, 1 + accelerationVertGauge = accelerationVert, "Accel: Vertical", "acc", 0, 1.5, 0.5, 0.6, 1.4, 1.5, 3, 1 + gyroYawGauge = gyroYaw, "Gyro: Yaw rate", "acc", -100, 100, -100, -100, 100, 100, 3, 1 + egt1Gauge = egt1, "EGT#1", "C", 0, 2000 + egt2Gauge = egt2, "EGT#2", "C", 0, 2000 + rpmAccelerationGa = rpmAcceleration, "rpm delta", "RPM/s", -2000, 2000, -2000, 2000, -2000, 2000, 0, 0 + wastegatePosGauge = wastegatePositionSensor, "Wastegate position sensor", "%", 0, 100, 0, 0, 100, 100, 1, 1 + auxSpeed1Gauge = auxSpeed1, "Aux Freq Input1", "hz", 0, 30000, 0, 0, 30000, 30000, 0, 0 + +gaugeCategory = VVT + vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 + vvtPositionB1EGauge = vvtPositionB1E, "VVT: bank 1 exhaust", "deg", -60, 60, -60, -60, 60, 60, 1, 1 + vvtPositionB2IGauge = vvtPositionB2I, "VVT: bank 2 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 + vvtPositionB2EGauge = vvtPositionB2E, "VVT: bank 2 exhaust", "deg", -60, 60, -60, -60, 60, 60, 1, 1 + vvtTargets1Gauge = vvtTargets1, "VVT: bank 1 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + + +gaugeCategory = Ignition + sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 + baseIgnAdvGauge = baseIgnitionAdvance, "Ignition: Timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1 + correctedIgnAdvGauge = correctedIgnitionAdvance, "Timing: ignition", "degrees", -100, 100, -999, -999, 999, 999, 1, 1 + dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1 + coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1 + ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1 + +gaugeCategory = Acceleration Enrichment + deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1 + tpsAccelFuelGauge = tpsAccelFuel,"AE: TPS enrich", "ms", 0, 120, 10, 10, 100, 100, 1, 1 + wallFuelAmountGauge = wallFuelAmount, "AE: wall amount", "mg", 0, 100, 0, 0, 100, 100, 0, 0 + wallFuelCorrectionGauge = wallFuelCorrection, "AE: wall correction extra", "mg", -20, 20, -100, -100, 100, 100, 1, 1 + +gaugeCategory = Fueling + ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld + fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 + tChargeGauge = sd_tCharge, "Fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 + baroCorrectionGauge = baroCorrection,"Fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + crankingFuelGauge = crankingFuel_fuel, "Fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 + iatCorrectionGauge = running_intakeTemperatureCoefficient, "Fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 + cltCorrectionGauge = running_coolantTemperatureCoefficient, "Fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 + injectorDutyCycleGauge=injectorDutyCycle, "Fuel: injector duty cycle","%", 0, 120, 10, 10, 100, 100, 1, 1 + actualLastInjectionGauge = actualLastInjection, "Fuel: Last inj pulse width", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 3, 1 + veValueGauge = veValue, "fuel: VE", "", 0, 120, 10, 10, 100, 100, 1, 1 + + injectorLagMsGauge = m_deadtime, "Fuel: injector lag", "mSec", 0, 10, 0, 0, 10, 10, 3, 1 + fuelRunningGauge = running_fuel, "Fuel: running", "mg", 0, 100, 0, 0, 100, 100, 3, 1 + baseFuelGauge = running_baseFuel, "Fuel: base cycle mass", "mg", 0, 100, 0, 0, 100, 100, 2, 0 + fuelPidCorrectionGauge = fuelPidCorrection1, "Fuel: fuel trim", "%", -10, 10, -8, -5, 5, 8, 3, 1 + fuelPidCorrectionGauge2= fuelPidCorrection2, "Fuel: fuel trim 2", "%", -10, 10, -8, -5, 5, 8, 3, 1 + fuelingLoadGauge = fuelingLoad, "Fuel: Load", "%", 0, 300, 0, 0, 300, 300, 1, 1 + totalFuelConsumptionGauge = totalFuelConsumption, "Fuel: Total consumed", "g", 0, 10000, 0, 0, 10000, 10000, 0, 0 + fuelFlowRateGauge = fuelFlowRate, "Fuel: Flow rate", "g/s", 0, 50, 0, 0, 50, 50, 2, 0 + targetLambdaGauge = targetLambda,"fuel: target lambda", "", 10, 19.4, 12, 13, 15, 16, 2, 2 + currentTargetAfrGauge = targetAFR,"fuel: target AFR", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 + +gaugeCategory = Throttle Body (incl. ETB) + pedalPositionGauge = throttlePedalPosition, "Throttle pedal position", "%", 0, 120, 0, 0, 100, 100, 1, 1 + tpsADCGauge = tpsADC, "tps1 ADC", "ADC", 0, 1024, 0, 0, 0, 0, 0, 0 + TPSGauge = TPSValue, "Throttle position", "%", 0, 100, 0, 0, 100, 100, 1, 1 + TPS2Gauge = TPS2Value, "Throttle position #2", "%", 0, 100, 0, 0, 100, 100, 1, 1 + + etbTargetGauge = etbTarget, "ETB: position target", "%", 0, 100, 0, 0, 100, 100, 1, 1 + etbErrorGauge = etbStatus_error, "ETB: position error", "%", -20, 20, -10, -5, 5, 10, 2, 0 + tps1SplitGauge = tps1Split, "TPS1 Sensor Split", "%", -20, 20, -10, -5, 5, 10, 2, 0 + tps2SplitGauge = tps2Split, "TPS2 Sensor Split", "%", -20, 20, -10, -5, 5, 10, 2, 0 + accPedalSplitGauge = accPedalSplit, "Pedal Sensor Split", "%", -20, 20, -10, -5, 5, 10, 2, 0 + etbDutyCycleGauge = etb1DutyCycle, "ETB: Duty", "%", -100, 100, -75, -50, 50, 75, 0, 0 + +gaugeCategory = Sensors - Raw + rawTps1PrimaryGauge = rawTps1Primary, "Raw TPS 1 Primary", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawTps1SecondaryGauge = rawTps1Secondary, "Raw TPS 1 Secondary", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawTps2PrimaryGauge = rawTps2Primary, "Raw TPS 2 Primary", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawTps2SecondaryGauge = rawTps2Secondary, "Raw TPS 2 Secondary", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput1Gauge = rawAnalogInput1, "Raw Aux 1", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput2Gauge = rawAnalogInput2, "Raw Aux 2", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput3Gauge = rawAnalogInput3, "Raw Aux 3", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput4Gauge = rawAnalogInput4, "Raw Aux 4", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput5Gauge = rawAnalogInput5, "Raw Aux 5", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput6Gauge = rawAnalogInput6, "Raw Aux 6", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput7Gauge = rawAnalogInput7, "Raw Aux 7", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAnalogInput8Gauge = rawAnalogInput8, "Raw Aux 8", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawPpsPrimaryGauge = rawPpsPrimary , "Raw Pedal Primary", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawPpsSecondaryGauge = rawPpsSecondary,"Raw Pedal Secondary","V",0, 5, 0, 0, 5, 5, 3, 0 + rawCltGauge = rawClt , "Raw CLT", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawBatteryGauge = rawBattery , "Raw Battery", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawIatGauge = rawIat , "Raw IAT", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawOilPressureGauge = rawOilPressure, "Raw Oil Pressure", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawIdlePositionSensorGauge = rawIdlePositionSensor, "Raw Idle Position", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawWastegatePositionGauge = rawWastegatePosition,"Raw Wastegate Position","V", 0, 5, 0, 0, 5, 5, 3, 0 + rawLowFuelPressureGauge = rawLowFuelPressure,"Raw fuel pressure (low) voltage","V", 0, 5, 0, 0, 5, 5, 3, 0 + rawHighFuelPressureGauge = rawHighFuelPressure,"Raw fuel pressure (high) voltage","V", 0, 5, 0, 0, 5, 5, 3, 0 + rawMafGauge = rawMaf , "Raw MAF", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawMapGauge = rawMap , "Raw MAP", "V", 0, 5, 0, 0, 5, 5, 3, 0 + rawAfrGauge = rawAfr , "Raw EGO", "V", 0, 5, 0, 0, 5, 5, 3, 0 + vssEdgeCounterGauge = vssEdgeCounter, "Raw VSS", "counter", 0, 5, 0, 0, 5, 5, 0, 0 + issEdgeCounterGauge = issEdgeCounter, "Raw ISS", "counter", 0, 5, 0, 0, 5, 5, 0, 0 + +gaugeCategory = Transmission + desiredGearGauge = tcuDesiredGear, "TCU: Desired Gear", "gear", -1, 10, -1, -1, 10, 10, 0, 0 + currentGearGauge = tcuCurrentGear, "Current Gear", "gear", -1, 10, -1, -1, 10, 10, 0, 0 + detectedGearGauge = detectedGear, "Detected Gear", "gear", 0, 10, 0, 0, 10, 10, 0, 0 + speedToRpmRatioGauge = speedToRpmRatio, "Gearbox Ratio", "", 0, 100, 0, 0, 100, 100, 4, 4 + ISSGauge = ISSValue, "TCU: Input Shaft Speed", "RPM", 0, {rpmHardLimit + 2000}, 200, {cranking_rpm}, {rpmHardLimit - 500}, {rpmHardLimit}, 0, 0 + tcRatioGauge = tcRatio, "TCU: Torque Converter Ratio", "", 0, 100, 0, 0, 100, 100, 4, 4 + shiftTimeGauge = lastShiftTime, "Last Shift Time", "S", 0, 2, 0, 0, 2, 2, 4, 4 + +gaugeCategory = Knock + knock1Gauge = m_knockCyl1, "Knock Cyl 1", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock2Gauge = m_knockCyl2, "Knock Cyl 2", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock3Gauge = m_knockCyl3, "Knock Cyl 3", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock4Gauge = m_knockCyl4, "Knock Cyl 4", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock5Gauge = m_knockCyl5, "Knock Cyl 5", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock6Gauge = m_knockCyl6, "Knock Cyl 6", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock7Gauge = m_knockCyl7, "Knock Cyl 7", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock8Gauge = m_knockCyl8, "Knock Cyl 8", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock9Gauge = m_knockCyl9, "Knock Cyl 9", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock10Gauge = m_knockCyl10, "Knock Cyl 10", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock11Gauge = m_knockCyl11, "Knock Cyl 11", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knock12Gauge = m_knockCyl12, "Knock Cyl 12", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knockLevelGauge = m_knockLevel,"Knock level", "dBv", -60, 10, -60, -60, 10, 10, 0, 0 + knockRetardGauge = m_knockRetard, "Knock retard", "deg", 0, 10, 0, 0, 10, 10, 1, 1 + knockCountGauge = m_knockCount, "Knock count", "count", 0, 10000, 0, 0, 10000, 10000, 0, 0 + +gaugeCategory = DynoView + accelGauge = VssAcceleration, "Vehicle acceleration", "m/s2", -10, 10, -6, -4, 4, 6, 2, 2 + +gaugeCategory = GPPWM Outputs + gppwmGauge1 = gppwmOutput1, { stringValue(gpPwmNote1) }, "%", 0, 100, 0, 0, 100, 100, 1, 1 + gppwmGauge2 = gppwmOutput2, { stringValue(gpPwmNote2) }, "%", 0, 100, 0, 0, 100, 100, 1, 1 + gppwmGauge3 = gppwmOutput3, { stringValue(gpPwmNote3) }, "%", 0, 100, 0, 0, 100, 100, 1, 1 + gppwmGauge4 = gppwmOutput4, { stringValue(gpPwmNote4) }, "%", 0, 100, 0, 0, 100, 100, 1, 1 + +[WueAnalyze] + +; wueCurveName, afrTempCompensationCurve, lambdaTargetTableName, lambdaChannel, coolantTempChannel, egoCorrectionChannel, wueChannel, activeCondition +#if LAMBDA + wueAnalyzeMap = wueAnalyzer_warmup_curve, wueAfrTargetOffsetCurve, lambdaTableTbl, lambdaValue, coolant, running_coolantTemperatureCoefficient, egoCorrectionForVeAnalyze + lambdaTargetTables = lambdaTableTbl, afrTSCustom +#else + wueAnalyzeMap = wueAnalyzer_warmup_curve, wueAfrTargetOffsetCurve, afrTableTbl, AFRValue, coolant, running_coolantTemperatureCoefficient, egoCorrectionForVeAnalyze + lambdaTargetTables = afrTableTbl, afrTSCustom +#endif + + wuePercentOffset = 0 ; for working with 0 based enrichment set to 100 + option = disableLiveUpdates + option = burnOnSend + +; filter = std_DeadLambda ; Auto build + + filter = decelFilterMap,"After Start Enrich", engine, & , 4 , , false + filter = accelFilterTp, "TP Accel Enrich" , engine, & , 16, , false + filter = decelFilterTp, "TP Decel Enrich" , engine, & , 32, , false + filter = accelFilterMap,"MAP Accel Enrich" , engine, & , 64, , false + filter = decelFilterMap,"MAP Decel Enrich" , engine, & , 128, , false + ; this works, just another way to skin a cat + ;filter = decelFilter, "Decel Flag" , tpsaccden, > , 0, , false + filter = overrunFilter, "Overrun" , pulseWidth1, = , 0, , false + filter = highThrottle, "High Throttle" , throttle, > , 15, , true + filter = lowRpm, "Low RPM" , rpm, < , 300, , false + filter = std_Custom ; Standard Custom Expression Filter. + + +[FrontPage] + ; Gauges are numbered left to right, top to bottom. + ; + ; 1 2 3 4 + ; 5 6 7 8 + + gauge1 = RPMGauge + gauge2 = CLTGauge + gauge3 = TPSGauge + gauge4 = MAPGauge +#if LAMBDA + gauge5 = lambda1Gauge +#else + gauge5 = afr1Gauge +#endif + gauge6 = VBattGauge + gauge7 = dwellGauge + gauge8 = correctedIgnAdvGauge + + ; = expression, off-label, on-label, off-bg, off-fg, on-bg, on-fg + ; Line 1 + ; important status + ; this is required so that the "config error" feature works in TS + ; DO NOT CHANGE THIS LINE - TS is looking for an indicator with particular text/styling + ; you don't even have to show it by default + ; DO NOT CHANGE THIS LINE + ; DO NOT CHANGE THIS LINE + indicator = { hasCriticalError }, "Config Error", "Config Error", white, black, red, black + ; DO NOT CHANGE THIS LINE + ; DO NOT CHANGE THIS LINE + ; todo: do we want to drop this line since we have "config error" thing above? + indicator = { hasCriticalError }, "No errors", "CRITICAL ERROR", white, black, red, black + indicator = { needBurn }, "Settings saved", "Unsaved changes", white, black, yellow, black + indicator = { isWarnNow }, "No warnings", "Warning", white, black, yellow, black + indicator = { checkEngine }, "No Check Engine", "Check Engine", white, black, red, black + indicator = { isTriggerError}, "Trigger OK", "Trigger ERR", white, black, red, black + indicator = { fuelCutReason != 0 }, "Injection OK", { Fuel cut: bitStringValue(fuelIgnCutCodeList, fuelCutReason)}, white, black, yellow, black + indicator = { sparkCutReason != 0 }, "Ignition OK", { Ign cut: bitStringValue(fuelIgnCutCodeList, sparkCutReason)}, white, black, yellow, black + indicator = { etbErrorCode != 0 }, "ETB OK", { ETB: bitStringValue(etbCutCodeList, etbErrorCode)}, white, black, yellow, black + + ; minor info + indicator = { isFanOn }, "Fan off", "Fan on", white, black, green, black + indicator = { isFan2On }, "Fan 2 off", "Fan 2 on", white, black, green, black + indicator = { isMainRelayOn }, "Main relay off", "Main relay on", white, black, green, black + ; Line 2 + ; = expression, off-label, on-label, off-bg, off-fg, on-bg, on-fg + indicator = { isFuelPumpOn }, "Fuel pump off", "Fuel pump on", white, black, green, black + indicator = { clutchUpState }, "No clutch Up", "Clutch Up", white, black, red, black + indicator = { clutchDownState }, "No clutch down", "Clutch down", white, black, yellow, black + indicator = { brakePedalState }, "No braking", "Brake down", white, black, red, black + indicator = { acButtonState }, "AC Switch off", "AC Switch on", white, black, blue, white + indicator = { m_acEnabled }, "AC Relay off", "AC Relay on", white, black, blue, white + indicator = { isIdleClosedLoop }, "Not idling", "Idling", white, black, green, black + indicator = { isIdleCoasting }, "Not coasting", "Coasting", white, black, green, black + indicator = { dfcoActive }, "Not decel fuel cut", "Decel fuel cut", white, black, yellow, black + indicator = { isAboveAccelThreshold }, "No TPS accel", "TPS accel active", white, black, yellow, black + ; error codes + indicator = { isTpsError }, "TPS OK", "TPS error", white, black, red, black + + ; Line 3 + ; = expression, off-label, on-label, off-bg, off-fg, on-bg, on-fg + indicator = { isTps2Error }, "TPS 2 OK", "TPS 2 error", white, black, red, black + indicator = { isPedalError }, "Pedal OK", "Pedal error", white, black, red, black + indicator = { isCltError }, "CLT OK", "CLT error", white, black, red, black + indicator = { isIatError }, "IAT OK", "IAT error", white, black, red, black + ; not implemented + ; indicator = { ind_map_error}, "map", "map error", white, black, red, black + indicator = { sd_present }, "No SD card", "SD card present", white, black, green, black + indicator = { sd_logging_internal }, "No SD logging", "SD logging", white, black, green, black + indicator = { sd_msd }, "No SD USB", "SD USB", white, black, green, black + indicator = { etbRevLimitActive }, "No ETB RPM Limit", "ETB RPM Limit", white, black, yellow, black + + indicator = { wbo0_hasFault }, { WBO0: bitStringValue(wboFaultCodeList, faultCode)}, { WBO0: bitStringValue(wboFaultCodeList, faultCode)}, white, black, red, black + + ; indicator = { isInjectionEnabled && fuelCutReason == 0 }, { Inj: bitStringValue(injModeList, currentInjectionMode) }, { Inj: bitStringValue(injModeList, currentInjectionMode) }, white, black, white, black + ; indicator = { isIgnitionEnabled && sparkCutReason == 0 }, { Ign: bitStringValue(ignModeList, currentIgnitionMode) }, { Ign: bitStringValue(ignModeList, currentIgnitionMode) }, white, black, white, black + +; looks like TS would append four system indicators below: Data Logging, ???, Not Connected, Protocol Error + +[KeyActions] + showPanel = spi, spiFunction + showPanel = con, connection + +; +; this section defines how we log output channels +; see [OutputChannels] +; +[Datalog] + ; Channel Label Type Format + entry = time, "Time", float, "%.3f" +entry = sd_present, "SD: Present", int, "%d" +entry = sd_logging_internal, "SD: Logging", int, "%d" +entry = triggerScopeReady, "triggerScopeReady", int, "%d" +entry = antilagTriggered, "antilagTriggered", int, "%d" +entry = isFanOn, "Radiator Fan", int, "%d" +entry = isO2HeaterOn, "isO2HeaterOn", int, "%d" +entry = checkEngine, "checkEngine", int, "%d" +entry = needBurn, "needBurn", int, "%d" +entry = sd_msd, "SD: MSD", int, "%d" +entry = isFan2On, "Radiator Fan 2", int, "%d" +entry = acrActive, "Harley ACR Active", int, "%d" +entry = toothLogReady, "Tooth Logger Ready", int, "%d" +entry = isTpsError, "Error: TPS", int, "%d" +entry = isCltError, "Error: CLT", int, "%d" +entry = isMapError, "Error: MAP", int, "%d" +entry = isIatError, "Error: IAT", int, "%d" +entry = isTriggerError, "Error: Trigger", int, "%d" +entry = hasCriticalError, "Error: Active", int, "%d" +entry = isWarnNow, "Warning: Active", int, "%d" +entry = isPedalError, "Error: Pedal", int, "%d" +entry = isKnockChipOk, "isKnockChipOk", int, "%d" +entry = launchTriggered, "Launch Control Triggered", int, "%d" +entry = isTps2Error, "Error: TPS2", int, "%d" +entry = injectorFault, "Injector Fault", int, "%d" +entry = ignitionFault, "Ignition Fault", int, "%d" +entry = isMainRelayOn, "isMainRelayOn", int, "%d" +entry = isUsbConnected, "isUsbConnected", int, "%d" +entry = dfcoActive, "dfcoActive", int, "%d" +entry = RPMValue, "RPM", int, "%d" +entry = rpmAcceleration, "dRPM", int, "%d" +entry = speedToRpmRatio, "Gearbox Ratio", float, "%.3f" +entry = internalMcuTemperature, "CPU Temperature", int, "%d" +entry = coolant, "CLT", float, "%.3f" +entry = intake, "IAT", float, "%.3f" +entry = auxTemp1, "auxTemp1", float, "%.3f" +entry = auxTemp2, "auxTemp2", float, "%.3f" +entry = TPSValue, "TPS", float, "%.3f" +entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" +entry = tpsADC, "tpsADC", int, "%d" +entry = rawMaf, "rawMaf", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" +entry = MAPValue, "MAP", float, "%.3f" +entry = baroPressure, "baroPressure", float, "%.3f" +entry = lambdaValue, "Lambda", float, "%.3f" +entry = VBatt, "VBatt", float, "%.3f" +entry = oilPressure, "Oil Pressure", float, "%.3f" +entry = vvtPositionB1I, "VVT: bank 1 intake", float, "%.3f" +entry = actualLastInjection, "Fuel: Last inj pulse width", float, "%.3f" +entry = injectorDutyCycle, "Fuel: injector duty cycle", float, "%.3f" +entry = veValue, "Fuel: VE", float, "%.3f" +entry = injectionOffset, "Fuel: Injection timing SOI", int, "%d" +entry = engineMakeCodeNameCrc16, "Engine CRC16", int, "%d" +entry = wallFuelAmount, "Fuel: wall amount", float, "%.3f" +entry = wallFuelCorrectionValue, "Fuel: wall correction", float, "%.3f" +entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" +entry = canReadCounter, "CAN: Rx", int, "%d" +entry = tpsAccelFuel, "Fuel: TPS AE add fuel ms", float, "%.3f" +entry = currentIgnitionMode, "Ignition: Mode", int, "%d" +entry = currentInjectionMode, "Fuel: Injection mode", int, "%d" +entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f" +entry = etbTarget, "ETB Target", float, "%.3f" +entry = etb1DutyCycle, "ETB: Duty", float, "%.3f" +entry = fuelTankLevel, "Fuel level", float, "%.3f" +entry = totalFuelConsumption, "Fuel: Total consumed", int, "%d" +entry = fuelFlowRate, "Fuel: Flow rate", float, "%.3f" +entry = TPS2Value, "TPS2", float, "%.3f" +entry = tuneCrc16, "Tune CRC16", int, "%d" +entry = seconds, "Uptime", int, "%d" +entry = engineMode, "Engine Mode", int, "%d" +entry = firmwareVersion, "firmware", int, "%d" +entry = rawIdlePositionSensor, "rawIdlePositionSensor", float, "%.3f" +entry = rawWastegatePosition, "rawWastegatePosition", float, "%.3f" +entry = accelerationLat, "Accel: Lateral", float, "%.3f" +entry = accelerationLon, "Accel: Longitudinal", float, "%.3f" +entry = detectedGear, "Detected Gear", int, "%d" +entry = maxTriggerReentrant, "maxTriggerReentrant", int, "%d" +entry = rawLowFuelPressure, "rawLowFuelPressure", float, "%.3f" +entry = rawHighFuelPressure, "rawHighFuelPressure", float, "%.3f" +entry = lowFuelPressure, "Fuel pressure (low)", float, "%.3f" +entry = tcuDesiredGear, "TCU: Desired Gear", int, "%d" +entry = flexPercent, "Flex Ethanol %", float, "%.3f" +entry = wastegatePositionSensor, "Wastegate position sensor", float, "%.3f" +entry = highFuelPressure, "Fuel pressure (high)", float, "%.3f" +entry = calibrationValue, "calibrationValue", float, "%.3f" +entry = calibrationMode, "calibrationMode", int, "%d" +entry = idleStepperTargetPosition, "Idle: Stepper target position", int, "%d" +entry = tsConfigVersion, "tsConfigVersion", int, "%d" +entry = totalTriggerErrorCounter, "Trigger Error Counter", int, "%d" +entry = orderingErrorCounter, "orderingErrorCounter", int, "%d" +entry = warningCounter, "Warning: counter", int, "%d" +entry = lastErrorCode, "Warning: last", int, "%d" +entry = recentErrorCode1, "recentErrorCode 1", int, "%d" +entry = recentErrorCode2, "recentErrorCode 2", int, "%d" +entry = recentErrorCode3, "recentErrorCode 3", int, "%d" +entry = recentErrorCode4, "recentErrorCode 4", int, "%d" +entry = recentErrorCode5, "recentErrorCode 5", int, "%d" +entry = recentErrorCode6, "recentErrorCode 6", int, "%d" +entry = recentErrorCode7, "recentErrorCode 7", int, "%d" +entry = recentErrorCode8, "recentErrorCode 8", int, "%d" +entry = debugFloatField1, "debugFloatField1", float, "%.3f" +entry = debugFloatField2, "debugFloatField2", float, "%.3f" +entry = debugFloatField3, "debugFloatField3", float, "%.3f" +entry = debugFloatField4, "debugFloatField4", float, "%.3f" +entry = debugFloatField5, "debugFloatField5", float, "%.3f" +entry = debugFloatField6, "debugFloatField6", float, "%.3f" +entry = debugFloatField7, "debugFloatField7", float, "%.3f" +entry = debugIntField1, "debugIntField1", int, "%d" +entry = debugIntField2, "debugIntField2", int, "%d" +entry = debugIntField3, "debugIntField3", int, "%d" +entry = debugIntField4, "debugIntField4", int, "%d" +entry = debugIntField5, "debugIntField5", int, "%d" +entry = egt1, "EGT 1", int, "%d" +entry = egt2, "EGT 2", int, "%d" +entry = egt3, "EGT 3", int, "%d" +entry = egt4, "EGT 4", int, "%d" +entry = egt5, "EGT 5", int, "%d" +entry = egt6, "EGT 6", int, "%d" +entry = egt7, "EGT 7", int, "%d" +entry = egt8, "EGT 8", int, "%d" +entry = rawTps1Primary, "rawTps1Primary", float, "%.3f" +entry = rawPpsPrimary, "rawPpsPrimary", float, "%.3f" +entry = rawClt, "rawClt", float, "%.3f" +entry = rawIat, "rawIat", float, "%.3f" +entry = rawOilPressure, "rawOilPressure", float, "%.3f" +entry = fuelClosedLoopBinIdx, "fuelClosedLoopBinIdx", int, "%d" +entry = tcuCurrentGear, "Current Gear", int, "%d" +entry = rawPpsSecondary, "rawPpsSecondary", float, "%.3f" +entry = idlePositionSensor, "Idle: Position sensor", float, "%.3f" +entry = AFRValue, "Air/Fuel Ratio", float, "%.3f" +entry = VssAcceleration, "Vss Accel", float, "%.3f" +entry = lambdaValue2, "Lambda 2", float, "%.3f" +entry = AFRValue2, "Air/Fuel Ratio 2", float, "%.3f" +entry = vvtPositionB1E, "VVT: bank 1 exhaust", float, "%.3f" +entry = vvtPositionB2I, "VVT: bank 2 intake", float, "%.3f" +entry = vvtPositionB2E, "VVT: bank 2 exhaust", float, "%.3f" +entry = fuelPidCorrection1, "Fuel: Trim bank 1", float, "%.3f" +entry = fuelPidCorrection2, "Fuel: Trim bank 2", float, "%.3f" +entry = rawTps1Secondary, "rawTps1Secondary", float, "%.3f" +entry = rawTps2Primary, "rawTps2Primary", float, "%.3f" +entry = rawTps2Secondary, "rawTps2Secondary", float, "%.3f" +entry = accelerationVert, "Accel: Vertical", float, "%.3f" +entry = gyroYaw, "Gyro: Yaw rate", float, "%.3f" +entry = vvtTargets1, "vvtTargets 1", int, "%d" +entry = vvtTargets2, "vvtTargets 2", int, "%d" +entry = vvtTargets3, "vvtTargets 3", int, "%d" +entry = vvtTargets4, "vvtTargets 4", int, "%d" +entry = turboSpeed, "Turbocharger Speed", int, "%d" +entry = ignitionAdvanceCyl1, "Ign: Timing Cyl 1", float, "%.3f" +entry = ignitionAdvanceCyl2, "Ign: Timing Cyl 2", float, "%.3f" +entry = ignitionAdvanceCyl3, "Ign: Timing Cyl 3", float, "%.3f" +entry = ignitionAdvanceCyl4, "Ign: Timing Cyl 4", float, "%.3f" +entry = ignitionAdvanceCyl5, "Ign: Timing Cyl 5", float, "%.3f" +entry = ignitionAdvanceCyl6, "Ign: Timing Cyl 6", float, "%.3f" +entry = ignitionAdvanceCyl7, "Ign: Timing Cyl 7", float, "%.3f" +entry = ignitionAdvanceCyl8, "Ign: Timing Cyl 8", float, "%.3f" +entry = ignitionAdvanceCyl9, "Ign: Timing Cyl 9", float, "%.3f" +entry = ignitionAdvanceCyl10, "Ign: Timing Cyl 10", float, "%.3f" +entry = ignitionAdvanceCyl11, "Ign: Timing Cyl 11", float, "%.3f" +entry = ignitionAdvanceCyl12, "Ign: Timing Cyl 12", float, "%.3f" +entry = tps1Split, "tps1Split", float, "%.3f" +entry = tps2Split, "tps2Split", float, "%.3f" +entry = tps12Split, "tps12Split", float, "%.3f" +entry = accPedalSplit, "accPedalSplit", float, "%.3f" +entry = sparkCutReason, "Ign: Cut Code", int, "%d" +entry = fuelCutReason, "Fuel: Cut Code", int, "%d" +entry = mafEstimate, "Air: Flow estimate", float, "%.3f" +entry = instantRpm, "sync: instant RPM", int, "%d" +entry = rawMap, "rawMap", float, "%.3f" +entry = rawAfr, "rawAfr", float, "%.3f" +entry = calibrationValue2, "calibrationValue2", float, "%.3f" +entry = luaInvocationCounter, "Lua: Tick counter", int, "%d" +entry = luaLastCycleDuration, "Lua: Last tick duration", int, "%d" +entry = tcu_currentRange, "TCU: Current Range", int, "%d" +entry = tcRatio, "TCU: Torque Converter Ratio", float, "%.3f" +entry = lastShiftTime, "lastShiftTime", float, "%.3f" +entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" +entry = issEdgeCounter, "issEdgeCounter", int, "%d" +entry = auxLinear1, "Aux linear #1", float, "%.3f" +entry = auxLinear2, "Aux linear #2", float, "%.3f" +entry = fallbackMap, "fallbackMap", float, "%.3f" +entry = instantMAPValue, "Instant MAP", float, "%.3f" +entry = maxLockedDuration, "maxLockedDuration", int, "%d" +entry = canWriteOk, "CAN: Tx OK", int, "%d" +entry = canWriteNotOk, "CAN: Tx err", int, "%d" +entry = triggerPrimaryFall, "triggerPrimaryFall", int, "%d" +entry = triggerPrimaryRise, "triggerPrimaryRise", int, "%d" +entry = triggerSecondaryFall, "triggerSecondaryFall", int, "%d" +entry = triggerSecondaryRise, "triggerSecondaryRise", int, "%d" +entry = triggerVvtFall, "triggerVvtFall", int, "%d" +entry = triggerVvtRise, "triggerVvtRise", int, "%d" +entry = triggerVvt2Fall, "triggerVvt2Fall", int, "%d" +entry = triggerVvt2Rise, "triggerVvt2Rise", int, "%d" +entry = starterState, "starterState", int, "%d" +entry = starterRelayDisable, "starterRelayDisable", int, "%d" +entry = multiSparkCounter, "Ign: Multispark count", int, "%d" +entry = extiOverflowCount, "extiOverflowCount", int, "%d" +entry = alternatorStatus_pTerm, "alternatorStatus_pTerm", float, "%.3f" +entry = alternatorStatus_iTerm, "alternatorStatus_iTerm", float, "%.3f" +entry = alternatorStatus_dTerm, "alternatorStatus_dTerm", float, "%.3f" +entry = alternatorStatus_output, "alternatorStatus_output", float, "%.3f" +entry = alternatorStatus_error, "alternatorStatus_error", float, "%.3f" +entry = alternatorStatus_resetCounter, "alternatorStatus_resetCounter", int, "%d" +entry = idleStatus_pTerm, "idleStatus_pTerm", float, "%.3f" +entry = idleStatus_iTerm, "idleStatus_iTerm", float, "%.3f" +entry = idleStatus_dTerm, "idleStatus_dTerm", float, "%.3f" +entry = idleStatus_output, "idleStatus_output", float, "%.3f" +entry = idleStatus_error, "idleStatus_error", float, "%.3f" +entry = idleStatus_resetCounter, "idleStatus_resetCounter", int, "%d" +entry = etbStatus_pTerm, "etbStatus_pTerm", float, "%.3f" +entry = etbStatus_iTerm, "etbStatus_iTerm", float, "%.3f" +entry = etbStatus_dTerm, "etbStatus_dTerm", float, "%.3f" +entry = etbStatus_output, "etbStatus_output", float, "%.3f" +entry = etbStatus_error, "etbStatus_error", float, "%.3f" +entry = etbStatus_resetCounter, "etbStatus_resetCounter", int, "%d" +entry = boostStatus_pTerm, "boostStatus_pTerm", float, "%.3f" +entry = boostStatus_iTerm, "boostStatus_iTerm", float, "%.3f" +entry = boostStatus_dTerm, "boostStatus_dTerm", float, "%.3f" +entry = boostStatus_output, "boostStatus_output", float, "%.3f" +entry = boostStatus_error, "boostStatus_error", float, "%.3f" +entry = boostStatus_resetCounter, "boostStatus_resetCounter", int, "%d" +entry = wastegateDcStatus_pTerm, "wastegateDcStatus_pTerm", float, "%.3f" +entry = wastegateDcStatus_iTerm, "wastegateDcStatus_iTerm", float, "%.3f" +entry = wastegateDcStatus_dTerm, "wastegateDcStatus_dTerm", float, "%.3f" +entry = wastegateDcStatus_output, "wastegateDcStatus_output", float, "%.3f" +entry = wastegateDcStatus_error, "wastegateDcStatus_error", float, "%.3f" +entry = wastegateDcStatus_resetCounter, "wastegateDcStatus_resetCounter", int, "%d" +entry = vvtStatus1_pTerm, "vvtStatus1_pTerm", float, "%.3f" +entry = vvtStatus1_iTerm, "vvtStatus1_iTerm", float, "%.3f" +entry = vvtStatus1_dTerm, "vvtStatus1_dTerm", float, "%.3f" +entry = vvtStatus1_output, "vvtStatus1_output", float, "%.3f" +entry = vvtStatus1_error, "vvtStatus1_error", float, "%.3f" +entry = vvtStatus1_resetCounter, "vvtStatus1_resetCounter", int, "%d" +entry = vvtStatus2_pTerm, "vvtStatus2_pTerm", float, "%.3f" +entry = vvtStatus2_iTerm, "vvtStatus2_iTerm", float, "%.3f" +entry = vvtStatus2_dTerm, "vvtStatus2_dTerm", float, "%.3f" +entry = vvtStatus2_output, "vvtStatus2_output", float, "%.3f" +entry = vvtStatus2_error, "vvtStatus2_error", float, "%.3f" +entry = vvtStatus2_resetCounter, "vvtStatus2_resetCounter", int, "%d" +entry = vvtStatus3_pTerm, "vvtStatus3_pTerm", float, "%.3f" +entry = vvtStatus3_iTerm, "vvtStatus3_iTerm", float, "%.3f" +entry = vvtStatus3_dTerm, "vvtStatus3_dTerm", float, "%.3f" +entry = vvtStatus3_output, "vvtStatus3_output", float, "%.3f" +entry = vvtStatus3_error, "vvtStatus3_error", float, "%.3f" +entry = vvtStatus3_resetCounter, "vvtStatus3_resetCounter", int, "%d" +entry = vvtStatus4_pTerm, "vvtStatus4_pTerm", float, "%.3f" +entry = vvtStatus4_iTerm, "vvtStatus4_iTerm", float, "%.3f" +entry = vvtStatus4_dTerm, "vvtStatus4_dTerm", float, "%.3f" +entry = vvtStatus4_output, "vvtStatus4_output", float, "%.3f" +entry = vvtStatus4_error, "vvtStatus4_error", float, "%.3f" +entry = vvtStatus4_resetCounter, "vvtStatus4_resetCounter", int, "%d" +entry = auxSpeed1, "Aux speed 1", int, "%d" +entry = auxSpeed2, "Aux speed 2", int, "%d" +entry = ISSValue, "TCU: Input Shaft Speed", int, "%d" +entry = rawAnalogInput1, "rawAnalogInput 1", float, "%.3f" +entry = rawAnalogInput2, "rawAnalogInput 2", float, "%.3f" +entry = rawAnalogInput3, "rawAnalogInput 3", float, "%.3f" +entry = rawAnalogInput4, "rawAnalogInput 4", float, "%.3f" +entry = rawAnalogInput5, "rawAnalogInput 5", float, "%.3f" +entry = rawAnalogInput6, "rawAnalogInput 6", float, "%.3f" +entry = rawAnalogInput7, "rawAnalogInput 7", float, "%.3f" +entry = rawAnalogInput8, "rawAnalogInput 8", float, "%.3f" +entry = gppwmOutput1, "GPPWM Output 1", float, "%.3f" +entry = gppwmOutput2, "GPPWM Output 2", float, "%.3f" +entry = gppwmOutput3, "GPPWM Output 3", float, "%.3f" +entry = gppwmOutput4, "GPPWM Output 4", float, "%.3f" +entry = gppwmXAxis1, "gppwmXAxis 1", int, "%d" +entry = gppwmXAxis2, "gppwmXAxis 2", int, "%d" +entry = gppwmXAxis3, "gppwmXAxis 3", int, "%d" +entry = gppwmXAxis4, "gppwmXAxis 4", int, "%d" +entry = gppwmYAxis1, "gppwmYAxis 1", float, "%.3f" +entry = gppwmYAxis2, "gppwmYAxis 2", float, "%.3f" +entry = gppwmYAxis3, "gppwmYAxis 3", float, "%.3f" +entry = gppwmYAxis4, "gppwmYAxis 4", float, "%.3f" +entry = rawBattery, "rawBattery", float, "%.3f" +entry = ignBlendParameter1, "ignBlendParameter 1", float, "%.3f" +entry = ignBlendParameter2, "ignBlendParameter 2", float, "%.3f" +entry = ignBlendParameter3, "ignBlendParameter 3", float, "%.3f" +entry = ignBlendParameter4, "ignBlendParameter 4", float, "%.3f" +entry = ignBlendBias1, "ignBlendBias 1", float, "%.3f" +entry = ignBlendBias2, "ignBlendBias 2", float, "%.3f" +entry = ignBlendBias3, "ignBlendBias 3", float, "%.3f" +entry = ignBlendBias4, "ignBlendBias 4", float, "%.3f" +entry = ignBlendOutput1, "ignBlendOutput 1", float, "%.3f" +entry = ignBlendOutput2, "ignBlendOutput 2", float, "%.3f" +entry = ignBlendOutput3, "ignBlendOutput 3", float, "%.3f" +entry = ignBlendOutput4, "ignBlendOutput 4", float, "%.3f" +entry = veBlendParameter1, "veBlendParameter 1", float, "%.3f" +entry = veBlendParameter2, "veBlendParameter 2", float, "%.3f" +entry = veBlendParameter3, "veBlendParameter 3", float, "%.3f" +entry = veBlendParameter4, "veBlendParameter 4", float, "%.3f" +entry = veBlendBias1, "veBlendBias 1", float, "%.3f" +entry = veBlendBias2, "veBlendBias 2", float, "%.3f" +entry = veBlendBias3, "veBlendBias 3", float, "%.3f" +entry = veBlendBias4, "veBlendBias 4", float, "%.3f" +entry = veBlendOutput1, "veBlendOutput 1", float, "%.3f" +entry = veBlendOutput2, "veBlendOutput 2", float, "%.3f" +entry = veBlendOutput3, "veBlendOutput 3", float, "%.3f" +entry = veBlendOutput4, "veBlendOutput 4", float, "%.3f" +entry = boostOpenLoopBlendParameter1, "boostOpenLoopBlendParameter 1", float, "%.3f" +entry = boostOpenLoopBlendParameter2, "boostOpenLoopBlendParameter 2", float, "%.3f" +entry = boostOpenLoopBlendBias1, "boostOpenLoopBlendBias 1", float, "%.3f" +entry = boostOpenLoopBlendBias2, "boostOpenLoopBlendBias 2", float, "%.3f" +entry = boostOpenLoopBlendOutput1, "boostOpenLoopBlendOutput 1", int, "%d" +entry = boostOpenLoopBlendOutput2, "boostOpenLoopBlendOutput 2", int, "%d" +entry = boostClosedLoopBlendParameter1, "boostClosedLoopBlendParameter 1", float, "%.3f" +entry = boostClosedLoopBlendParameter2, "boostClosedLoopBlendParameter 2", float, "%.3f" +entry = boostClosedLoopBlendBias1, "boostClosedLoopBlendBias 1", float, "%.3f" +entry = boostClosedLoopBlendBias2, "boostClosedLoopBlendBias 2", float, "%.3f" +entry = boostClosedLoopBlendOutput1, "boostClosedLoopBlendOutput 1", float, "%.3f" +entry = boostClosedLoopBlendOutput2, "boostClosedLoopBlendOutput 2", float, "%.3f" +entry = coilState1, "coilState1", int, "%d" +entry = coilState2, "coilState2", int, "%d" +entry = coilState3, "coilState3", int, "%d" +entry = coilState4, "coilState4", int, "%d" +entry = coilState5, "coilState5", int, "%d" +entry = coilState6, "coilState6", int, "%d" +entry = coilState7, "coilState7", int, "%d" +entry = coilState8, "coilState8", int, "%d" +entry = coilState9, "coilState9", int, "%d" +entry = coilState10, "coilState10", int, "%d" +entry = coilState11, "coilState11", int, "%d" +entry = coilState12, "coilState12", int, "%d" +entry = injectorState1, "injectorState1", int, "%d" +entry = injectorState2, "injectorState2", int, "%d" +entry = injectorState3, "injectorState3", int, "%d" +entry = injectorState4, "injectorState4", int, "%d" +entry = injectorState5, "injectorState5", int, "%d" +entry = injectorState6, "injectorState6", int, "%d" +entry = injectorState7, "injectorState7", int, "%d" +entry = injectorState8, "injectorState8", int, "%d" +entry = injectorState9, "injectorState9", int, "%d" +entry = injectorState10, "injectorState10", int, "%d" +entry = injectorState11, "injectorState11", int, "%d" +entry = injectorState12, "injectorState12", int, "%d" +entry = triggerChannel1, "triggerChannel1", int, "%d" +entry = triggerChannel2, "triggerChannel2", int, "%d" +entry = vvtChannel1, "bank 1 intake cam input", int, "%d" +entry = vvtChannel2, "bank 1 exhaust cam input", int, "%d" +entry = vvtChannel3, "bank 2 intake cam input", int, "%d" +entry = vvtChannel4, "bank 2 exhaust cam input", int, "%d" +entry = outputRequestPeriod, "outputRequestPeriod", int, "%d" +entry = mapFast, "mapFast", float, "%.3f" +entry = luaGauges1, "Lua: Gauge 1", float, "%.3f" +entry = luaGauges2, "Lua: Gauge 2", float, "%.3f" +entry = rawMaf2, "rawMaf2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" +entry = vehicleSpeedKph, "Vehicle Speed", float, "%.3f" +entry = Gego, "Gego", float, "%.3f" +entry = testBenchIter, "testBenchIter", int, "%d" +entry = oilTemp, "oilTemp", float, "%.3f" +entry = fuelTemp, "fuelTemp", float, "%.3f" +entry = ambientTemp, "ambientTemp", float, "%.3f" +entry = compressorDischargeTemp, "compressorDischargeTemp", float, "%.3f" +entry = compressorDischargePressure, "compressorDischargePressure", float, "%.3f" +entry = throttleInletPressure, "throttleInletPressure", float, "%.3f" +entry = ignitionOnTime, "ignitionOnTime", int, "%d" +entry = engineRunTime, "engineRunTime", int, "%d" +entry = distanceTraveled, "distanceTraveled", float, "%.3f" +entry = afrGasolineScale, "Air/Fuel Ratio (Gas Scale)", float, "%.3f" +entry = afr2GasolineScale, "Air/Fuel Ratio 2 (Gas Scale)", float, "%.3f" +entry = totalFuelCorrection, "Fuel: Total correction", float, "%.3f" +entry = running_postCrankingFuelCorrection, "Fuel: Post cranking mult", float, "%.3f" +entry = running_intakeTemperatureCoefficient, "Fuel: IAT correction", float, "%.3f" +entry = running_coolantTemperatureCoefficient, "Fuel: CLT correction", float, "%.3f" +entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" +entry = running_baseFuel, "Fuel: base cycle mass", float, "%.3f" +entry = running_fuel, "Fuel: running", float, "%.3f" +entry = afrTableYAxis, "afrTableYAxis", float, "%.3f" +entry = targetLambda, "Fuel: target lambda", float, "%.3f" +entry = targetAFR, "Fuel: target AFR", float, "%.3f" +entry = stoichiometricRatio, "Fuel: Stoich ratio", float, "%.3f" +entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" +entry = sdAirMassInOneCylinder, "Air: Cylinder airmass", float, "%.3f" +entry = normalizedCylinderFilling, "Air: Normalized cyl filling", float, "%.3f" +entry = brokenInjector, "brokenInjector", int, "%d" +entry = injectorHwIssue, "injectorHwIssue", int, "%d" +entry = baseDwell, "Ignition: base dwell", float, "%.3f" +entry = sparkDwell, "Ignition: coil charge time", float, "%.3f" +entry = dwellAngle, "Ignition: dwell duration", float, "%.3f" +entry = cltTimingCorrection, "Ign: CLT correction", float, "%.3f" +entry = timingIatCorrection, "Ign: IAT correction", float, "%.3f" +entry = timingPidCorrection, "Idle: Timing adjustment", float, "%.3f" +entry = baseIgnitionAdvance, "Ignition: Timing", float, "%.3f" +entry = correctedIgnitionAdvance, "Timing: ignition", float, "%.3f" +entry = dwellVoltageCorrection, "Ign: Dwell voltage correction", float, "%.3f" +entry = luaTimingAdd, "Ign: Lua timing add", float, "%.3f" +entry = luaTimingMult, "Ign: Lua timing mult", float, "%.3f" +entry = luaIgnitionSkip, "Ign: Lua Spark Skip", int, "%d" +entry = m_knockLevel, "Knock: Current level", float, "%.3f" +entry = m_knockCyl1, "Knock: Cyl 1", int, "%d" +entry = m_knockCyl2, "Knock: Cyl 2", int, "%d" +entry = m_knockCyl3, "Knock: Cyl 3", int, "%d" +entry = m_knockCyl4, "Knock: Cyl 4", int, "%d" +entry = m_knockCyl5, "Knock: Cyl 5", int, "%d" +entry = m_knockCyl6, "Knock: Cyl 6", int, "%d" +entry = m_knockCyl7, "Knock: Cyl 7", int, "%d" +entry = m_knockCyl8, "Knock: Cyl 8", int, "%d" +entry = m_knockCyl9, "Knock: Cyl 9", int, "%d" +entry = m_knockCyl10, "Knock: Cyl 10", int, "%d" +entry = m_knockCyl11, "Knock: Cyl 11", int, "%d" +entry = m_knockCyl12, "Knock: Cyl 12", int, "%d" +entry = m_knockRetard, "Knock: Retard", float, "%.3f" +entry = m_knockThreshold, "Knock: Threshold", float, "%.3f" +entry = m_knockCount, "Knock: Count", int, "%d" +entry = m_maximumRetard, "Knock: Max retard", float, "%.3f" +entry = throttleUseWotModel, "Air: Throttle model WOT", int, "%d" +entry = throttleModelCrossoverAngle, "Air: Throttle crossover pos", float, "%.3f" +entry = throttleEstimatedFlow, "Air: Throttle flow estimate", float, "%.3f" +entry = m_requested_pump, "GDI: HPFP duration", float, "%.3f" +entry = fuel_requested_percent, "GDI: requested_percent", float, "%.3f" +entry = fuel_requested_percent_pi, "GDI: percent_pi", float, "%.3f" +entry = noValve, "noValve", int, "%d" +entry = angleAboveMin, "angleAboveMin", int, "%d" +entry = isHpfpInactive, "isHpfpInactive", int, "%d" +entry = m_pressureTarget_kPa, "GDI: target pressure", float, "%.3f" +entry = nextLobe, "GDI: nextLobe", float, "%.3f" +entry = di_nextStart, "GDI: next start", float, "%.3f" +entry = m_deadtime, "Fuel: injector lag", float, "%.3f" +entry = pressureDelta, "fuel: Injector pressure delta", float, "%.3f" +entry = pressureRatio, "fuel: Injector pressure ratio", float, "%.3f" +entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" +entry = combinedConditions, "combinedConditions", int, "%d" +entry = launchActivatePinState, "launchActivatePinState", int, "%d" +entry = isLaunchCondition, "isLaunchCondition", int, "%d" +entry = isSwitchActivated, "isSwitchActivated", int, "%d" +entry = isClutchActivated, "isClutchActivated", int, "%d" +entry = isValidInputPin, "isValidInputPin", int, "%d" +entry = activateSwitchCondition, "activateSwitchCondition", int, "%d" +entry = rpmCondition, "rpmCondition", int, "%d" +entry = speedCondition, "speedCondition", int, "%d" +entry = tpsCondition, "tpsCondition", int, "%d" +entry = isAntilagCondition, "isAntilagCondition", int, "%d" +entry = ALSMinRPMCondition, "ALSMinRPMCondition", int, "%d" +entry = ALSMaxRPMCondition, "ALSMaxRPMCondition", int, "%d" +entry = ALSMinCLTCondition, "ALSMinCLTCondition", int, "%d" +entry = ALSMaxCLTCondition, "ALSMaxCLTCondition", int, "%d" +entry = ALSMaxThrottleIntentCondition, "ALSMaxThrottleIntentCondition", int, "%d" +entry = isALSSwitchActivated, "isALSSwitchActivated", int, "%d" +entry = ALSActivatePinState, "ALSActivatePinState", int, "%d" +entry = ALSSwitchCondition, "ALSSwitchCondition", int, "%d" +entry = ALSTimerCondition, "ALSTimerCondition", int, "%d" +entry = fuelALSCorrection, "fuelALSCorrection", float, "%.3f" +entry = timingALSCorrection, "timingALSCorrection", float, "%.3f" +entry = timingALSSkip, "timingALSSkip", float, "%.3f" +entry = isTpsInvalid, "isTpsInvalid", int, "%d" +entry = m_shouldResetPid, "m_shouldResetPid", int, "%d" +entry = isBelowClosedLoopThreshold, "isBelowClosedLoopThreshold", int, "%d" +entry = isNotClosedLoop, "isNotClosedLoop", int, "%d" +entry = isZeroRpm, "isZeroRpm", int, "%d" +entry = hasInitBoost, "hasInitBoost", int, "%d" +entry = rpmTooLow, "rpmTooLow", int, "%d" +entry = tpsTooLow, "tpsTooLow", int, "%d" +entry = mapTooLow, "mapTooLow", int, "%d" +entry = isPlantValid, "isPlantValid", int, "%d" +entry = luaTargetAdd, "Boost: Lua target add", float, "%.3f" +entry = boostOutput, "Boost: Output", float, "%.3f" +entry = luaTargetMult, "Boost: Lua target mult", float, "%.3f" +entry = openLoopPart, "Boost: Open loop", float, "%.3f" +entry = luaOpenLoopAdd, "Boost: Lua open loop add", float, "%.3f" +entry = boostControllerClosedLoopPart, "Boost: Closed loop", float, "%.3f" +entry = boostControlTarget, "Boost: Target", float, "%.3f" +entry = acButtonState, "AC switch", int, "%d" +entry = m_acEnabled, "AC enabled", int, "%d" +entry = engineTooSlow, "AC engine too slow", int, "%d" +entry = engineTooFast, "AC engine too fast", int, "%d" +entry = noClt, "AC no CLT", int, "%d" +entry = engineTooHot, "AC engine too hot", int, "%d" +entry = tpsTooHigh, "AC tps too high", int, "%d" +entry = isDisabledByLua, "AC disabled by Lua", int, "%d" +entry = acCompressorState, "AC compressor on", int, "%d" +entry = latest_usage_ac_control, "AC latest activity", int, "%d" +entry = acSwitchLastChangeTimeMs, "acSwitchLastChangeTimeMs", int, "%d" +entry = cranking, "cranking", int, "%d" +entry = notRunning, "notRunning", int, "%d" +entry = disabledWhileEngineStopped, "disabledWhileEngineStopped", int, "%d" +entry = brokenClt, "brokenClt", int, "%d" +entry = enabledForAc, "enabledForAc", int, "%d" +entry = hot, "hot", int, "%d" +entry = cold, "cold", int, "%d" +entry = isPrime, "isPrime", int, "%d" +entry = engineTurnedRecently, "engineTurnedRecently", int, "%d" +entry = isFuelPumpOn, "isFuelPumpOn", int, "%d" +entry = ignitionOn, "ignitionOn", int, "%d" +entry = isBenchTest, "isBenchTest", int, "%d" +entry = hasIgnitionVoltage, "hasIgnitionVoltage", int, "%d" +entry = mainRelayState, "mainRelayState", int, "%d" +entry = delayedShutoffRequested, "delayedShutoffRequested", int, "%d" +entry = lua_fuelAdd, "Lua: Fuel add", float, "%.3f" +entry = lua_fuelMult, "Lua: Fuel mult", float, "%.3f" +entry = lua_clutchUpState, "lua_clutchUpState", int, "%d" +entry = lua_brakePedalState, "lua_brakePedalState", int, "%d" +entry = lua_acRequestState, "lua_acRequestState", int, "%d" +entry = lua_luaDisableEtb, "lua_luaDisableEtb", int, "%d" +entry = lua_luaIgnCut, "lua_luaIgnCut", int, "%d" +entry = sd_tCharge, "Air: Charge temperature estimate", float, "%.3f" +entry = sd_tChargeK, "Air: Charge temperature estimate K", float, "%.3f" +entry = crankingFuel_coolantTemperatureCoefficient, "Fuel: cranking CLT mult", float, "%.3f" +entry = crankingFuel_tpsCoefficient, "Fuel: cranking TPS mult", float, "%.3f" +entry = crankingFuel_durationCoefficient, "Fuel: cranking duration mult", float, "%.3f" +entry = crankingFuel_fuel, "Fuel: Cranking cycle mass", float, "%.3f" +entry = baroCorrection, "Fuel: Barometric pressure mult", float, "%.3f" +entry = hellenBoardId, "Detected Board ID", int, "%d" +entry = clutchUpState, "Clutch: up", int, "%d" +entry = clutchDownState, "Clutch: down", int, "%d" +entry = brakePedalState, "Brake switch", int, "%d" +entry = startStopState, "startStopState", int, "%d" +entry = startStopPhysicalState, "startStopPhysicalState", int, "%d" +entry = acrStateDup, "acrStateDup", int, "%d" +entry = acrEngineMovedRecently, "acrEngineMovedRecently", int, "%d" +entry = heaterControlEnabled, "heaterControlEnabled", int, "%d" +entry = luaDigitalState0, "luaDigitalState0", int, "%d" +entry = luaDigitalState1, "luaDigitalState1", int, "%d" +entry = luaDigitalState2, "luaDigitalState2", int, "%d" +entry = luaDigitalState3, "luaDigitalState3", int, "%d" +entry = startStopStateToggleCounter, "startStopStateToggleCounter", int, "%d" +entry = egtValue1, "egtValue1", float, "%.3f" +entry = egtValue2, "egtValue2", float, "%.3f" +entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d" +entry = fuelInjectionCounter, "Fuel: Injection counter", int, "%d" +entry = sparkCounter, "Ign: Spark counter", int, "%d" +entry = fuelingLoad, "Fuel: Load", float, "%.3f" +entry = ignitionLoad, "Ignition: load", float, "%.3f" +entry = veTableYAxis, "veTableYAxis", float, "%.3f" +entry = tpsFrom, "Fuel: TPS AE from", float, "%.3f" +entry = tpsTo, "Fuel: TPS AE to", float, "%.3f" +entry = deltaTps, "Fuel: TPS AE change", float, "%.3f" +entry = extraFuel, "extraFuel", float, "%.3f" +entry = valueFromTable, "valueFromTable", float, "%.3f" +entry = isAboveAccelThreshold, "Fuel: TPS AE Active", int, "%d" +entry = isBelowDecelThreshold, "isBelowDecelThreshold", int, "%d" +entry = isTimeToResetAccumulator, "Accel: reset time", int, "%d" +entry = isFractionalEnrichment, "isFractionalEnrichment", int, "%d" +entry = belowEpsilon, "Accel: below threshold", int, "%d" +entry = tooShort, "Accel: too short", int, "%d" +entry = fractionalInjFuel, "fractionalInjFuel", float, "%.3f" +entry = accumulatedValue, "accumulatedValue", float, "%.3f" +entry = maxExtraPerCycle, "maxExtraPerCycle", float, "%.3f" +entry = maxExtraPerPeriod, "maxExtraPerPeriod", float, "%.3f" +entry = maxInjectedPerPeriod, "maxInjectedPerPeriod", float, "%.3f" +entry = cycleCnt, "cycleCnt", int, "%d" +entry = hwEventCounters1, "Hardware events since boot 1", int, "%d" +entry = hwEventCounters2, "Hardware events since boot 2", int, "%d" +entry = hwEventCounters3, "Hardware events since boot 3", int, "%d" +entry = hwEventCounters4, "Hardware events since boot 4", int, "%d" +entry = hwEventCounters5, "Hardware events since boot 5", int, "%d" +entry = hwEventCounters6, "Hardware events since boot 6", int, "%d" +entry = vvtCamCounter, "Sync: total cams front counter", int, "%d" +entry = mapVvt_MAP_AT_SPECIAL_POINT, "mapVvt_MAP_AT_SPECIAL_POINT", float, "%.3f" +entry = mapVvt_MAP_AT_DIFF, "mapVvt_MAP_AT_DIFF", float, "%.3f" +entry = mapVvt_MAP_AT_CYCLE_COUNT, "mapVvt_MAP_AT_CYCLE_COUNT", int, "%d" +entry = mapVvt_map_peak, "mapVvt_map_peak", int, "%d" +entry = currentEngineDecodedPhase, "Sync: Engine Phase", float, "%.3f" +entry = triggerToothAngleError, "Sync: trigger angle error", float, "%.3f" +entry = triggerIgnoredToothCount, "triggerIgnoredToothCount", int, "%d" +entry = mapCamPrevToothAngle, "Sync: MAP: prev angle", float, "%.3f" +entry = isDecodingMapCam, "isDecodingMapCam", int, "%d" +entry = crankSynchronizationCounter, "sync: Crank sync counter", int, "%d" +entry = vvtSyncGapRatio, "vvtSyncGapRatio", float, "%.3f" +entry = vvtToothDurations0, "vvtToothDurations0", int, "%d" +entry = vvtCurrentPosition, "vvtCurrentPosition", float, "%.3f" +entry = vvtToothPosition1, "vvtToothPosition 1", float, "%.3f" +entry = vvtToothPosition2, "vvtToothPosition 2", float, "%.3f" +entry = vvtToothPosition3, "vvtToothPosition 3", float, "%.3f" +entry = vvtToothPosition4, "vvtToothPosition 4", float, "%.3f" +entry = triggerSyncGapRatio, "Trigger Sync Latest Ratio", float, "%.3f" +entry = triggerStateIndex, "triggerStateIndex", int, "%d" +entry = camResyncCounter, "sync: Phase Re-Sync Counter", int, "%d" +entry = vvtStateIndex, "vvtStateIndex", int, "%d" +entry = m_hasSynchronizedPhase, "sync: Known Engine Phase", int, "%d" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" +entry = idleState, "idleState", int, "%d" +entry = currentIdlePosition, "Idle: Position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" +entry = idleClosedLoop, "Idle: Closed loop", float, "%.3f" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" +entry = shouldResetPid, "Idle: shouldResetPid", int, "%d" +entry = wasResetPid, "Idle: wasResetPid", int, "%d" +entry = mustResetPid, "Idle: mustResetPid", int, "%d" +entry = isCranking, "Idle: cranking", int, "%d" +entry = isIacTableForCoasting, "isIacTableForCoasting", int, "%d" +entry = notIdling, "notIdling", int, "%d" +entry = needReset, "Idle: reset", int, "%d" +entry = isInDeadZone, "Idle: dead zone", int, "%d" +entry = isBlipping, "isBlipping", int, "%d" +entry = useClosedLoop, "useClosedLoop", int, "%d" +entry = badTps, "badTps", int, "%d" +entry = looksLikeRunning, "looksLikeRunning", int, "%d" +entry = looksLikeCoasting, "looksLikeCoasting", int, "%d" +entry = looksLikeCrankToIdle, "looksLikeCrankToIdle", int, "%d" +entry = isIdleCoasting, "Idle: coasting", int, "%d" +entry = isIdleClosedLoop, "Idle: Closed loop active", int, "%d" +entry = idleTarget, "Idle: Target RPM", int, "%d" +entry = targetRpmByClt, "Idle: Target RPM base", int, "%d" +entry = targetRpmAc, "Idle: Target A/C RPM", int, "%d" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" +entry = luaAdd, "idle: Lua Adder", float, "%.3f" +entry = idlePosition, "ETB: idlePosition", float, "%.3f" +entry = trim, "ETB: trim", float, "%.3f" +entry = luaAdjustment, "ETB: luaAdjustment", float, "%.3f" +entry = m_wastegatePosition, "DC: wastegatePosition", float, "%.3f" +entry = etbFeedForward, "etbFeedForward", float, "%.3f" +entry = etbIntegralError, "etbIntegralError", float, "%.3f" +entry = etbCurrentTarget, "etbCurrentTarget", float, "%.3f" +entry = etbCurrentAdjustedTarget, "etbCurrentAdjustedTarget", float, "%.3f" +entry = etbRevLimitActive, "etbRevLimitActive", int, "%d" +entry = jamDetected, "jamDetected", int, "%d" +entry = etbDutyRateOfChange, "ETB duty rate of change", float, "%.3f" +entry = etbDutyAverage, "ETB average duty", float, "%.3f" +entry = etbTpsErrorCounter, "ETB TPS error counter", int, "%d" +entry = etbPpsErrorCounter, "ETB pedal error counter", int, "%d" +entry = etbErrorCode, "etbErrorCode", int, "%d" +entry = jamTimer, "ETB jam timer", float, "%.3f" +entry = faultCode, "WBO: Fault code", int, "%d" +entry = heaterDuty, "WBO: Heater duty", int, "%d" +entry = pumpDuty, "WBO: Pump duty", int, "%d" +entry = tempC, "WBO: Temperature", int, "%d" +entry = nernstVoltage, "WBO: Nernst Voltage", float, "%.3f" +entry = esr, "WBO: ESR", int, "%d" +entry = dcOutput0, "DC: output0", float, "%.3f" +entry = isEnabled0_int, "DC: en0", int, "%d" +entry = isEnabled0, "isEnabled0", int, "%d" +entry = value0, "ETB: SENT value0", int, "%d" +entry = value1, "ETB: SENT value1", int, "%d" +entry = errorRate, "ETB: SENT error rate", float, "%.3f" +entry = vvtTarget, "vvtTarget", float, "%.3f" +entry = vvtOutput, "vvtOutput", float, "%.3f" +entry = lambdaCurrentlyGood, "lambdaCurrentlyGood", int, "%d" +entry = lambdaMonitorCut, "lambdaMonitorCut", int, "%d" +entry = lambdaTimeSinceGood, "lambdaTimeSinceGood", float, "%.3f" + + +[Menu] + +menuDialog = main +; see #1653 +; menu = "Data Logging" +; subMenu = std_ms3SdConsole, "Browse / Import SD Card" + + menu = "&Base &Engine" + subMenu = engineChars, "Base engine" + subMenu = limitsAndFallback, "Limits and fallbacks" + subMenu = triggerConfiguration, "Trigger" + subMenu = trigger_advanced, "Advanced Trigger" + subMenu = triggerConfiguration_gap, "Trigger Gap Override" + subMenu = std_separator + subMenu = energySystems, "Battery and alternator" + subMenu = std_separator + + # Digital outputs + subMenu = outputsDialog, "Outputs" + subMenu = acSettings, "Air Conditioning" + subMenu = statusLeds, "Status LEDs" + + menu = "Fuel" + # basic + subMenu = injectorConfig, "Injection configuration" + subMenu = injectionSettings, "Injection hardware", 0, {isInjectionEnabled == 1} + subMenu = cylinderBankSelect, "Cylinder bank selection", 0, {isInjectionEnabled == 1} + subMenu = injectorNonlinear, "Injector small-pulse correction", 0, {isInjectionEnabled == 1} + + groupMenu = "Cylinder fuel trims" + groupChildMenu = fuelTrimTbl1, "Fuel trim cyl 1" + groupChildMenu = fuelTrimTbl2, "Fuel trim cyl 2" + groupChildMenu = fuelTrimTbl3, "Fuel trim cyl 3" + groupChildMenu = fuelTrimTbl4, "Fuel trim cyl 4" + groupChildMenu = fuelTrimTbl5, "Fuel trim cyl 5" + groupChildMenu = fuelTrimTbl6, "Fuel trim cyl 6" + groupChildMenu = fuelTrimTbl7, "Fuel trim cyl 7" + groupChildMenu = fuelTrimTbl8, "Fuel trim cyl 8" + groupChildMenu = fuelTrimTbl9, "Fuel trim cyl 9" + groupChildMenu = fuelTrimTbl10, "Fuel trim cyl 10" + groupChildMenu = fuelTrimTbl11, "Fuel trim cyl 11" + groupChildMenu = fuelTrimTbl12, "Fuel trim cyl 12" + + subMenu = std_separator + + # Air mass model + subMenu = veTableDialog, "VE", 0, {isInjectionEnabled == 1} + + groupMenu = "VE blend tables" + groupChildMenu = veBlend1Cfg, "VE blend 1 bias", 0, {isInjectionEnabled} + groupChildMenu = veBlend1Table, "VE blend table 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend2Cfg, "VE blend 2 bias", 0, {isInjectionEnabled} + groupChildMenu = veBlend2Table, "VE blend table 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend3Cfg, "VE blend 3 bias", 0, {isInjectionEnabled} + groupChildMenu = veBlend3Table, "VE blend table 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend4Cfg, "VE blend 4 bias", 0, {isInjectionEnabled} + groupChildMenu = veBlend4Table, "VE blend table 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + + subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} + subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 0} + subMenu = mapEstimateTableTbl, "MAP estimate table" + subMenu = std_separator + + # Fuel model +#if LAMBDA + subMenu = lambdaTableTbl, "Target lambda", 0, {isInjectionEnabled == 1} +#else + subMenu = afrTableTbl, "Target AFR", 0, {isInjectionEnabled == 1} +#endif + subMenu = cltFuelCorrCurve, "CLT multiplier", 0, {isInjectionEnabled == 1} + subMenu = iatFuelCorrCurve, "IAT multiplier", 0, {isInjectionEnabled == 1} + subMenu = fuelClosedLoopDialog, "Closed loop fuel correction", 0, {isInjectionEnabled == 1} + subMenu = coastingFuelCutControl, "Deceleration fuel cutoff (DFCO)", 0, {isInjectionEnabled == 1} + subMenu = std_separator + + # Injector model + subMenu = injPhaseTableTbl, "Injection phase", 0, {isInjectionEnabled == 1} + subMenu = std_separator + + # Accel enrichment + subMenu = AccelEnrich, "Acceleration enrichment", 0, {isInjectionEnabled == 1} + subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1} + subMenu = tpsTspRpmCorrection, "TPS/TPS extra fuelRPM correction", 0, {isInjectionEnabled == 1} + + groupMenu = "Wall wetting AE" + groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 } + groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 } + + menu = "Ignition" + subMenu = ignitionSettings, "Ignition settings" + subMenu = std_separator + + subMenu = ignitionTableTbl, "Ignition advance", 0, {isIgnitionEnabled} + subMenu = cltTimingCorrCurve, "Ign CLT correction", 0, {isIgnitionEnabled == 1} + subMenu = ignitionIatCorrTableTbl, "Ign IAT correction", 0, {isIgnitionEnabled == 1} + subMenu = std_separator + + subMenu = dwellSettings, "Dwell", 0, {isIgnitionEnabled == 1} + groupMenu = "Ignition blend tables" + groupChildMenu = ignAdder1Cfg, "Ignition blend 1 bias", 0, {isIgnitionEnabled} + groupChildMenu = ignAdder1Table, "Ignition blend table 1", 0, { isIgnitionEnabled && ignBlends1_blendParameter != 0 } + groupChildMenu = ignAdder2Cfg, "Ignition blend 2 bias", 0, {isIgnitionEnabled} + groupChildMenu = ignAdder2Table, "Ignition blend table 2", 0, { isIgnitionEnabled && ignBlends2_blendParameter != 0 } + groupChildMenu = ignAdder3Cfg, "Ignition blend 3 bias", 0, {isIgnitionEnabled} + groupChildMenu = ignAdder3Table, "Ignition blend table 3", 0, { isIgnitionEnabled && ignBlends3_blendParameter != 0 } + groupChildMenu = ignAdder4Cfg, "Ignition blend 4 bias", 0, {isIgnitionEnabled} + groupChildMenu = ignAdder4Table, "Ignition blend table 4", 0, { isIgnitionEnabled && ignBlends4_blendParameter != 0 } + groupMenu = "Cylinder ign trims" + groupChildMenu = ignTrimTbl1, "Ignition trim cyl 1" + groupChildMenu = ignTrimTbl2, "Ignition trim cyl 2" + groupChildMenu = ignTrimTbl3, "Ignition trim cyl 3" + groupChildMenu = ignTrimTbl4, "Ignition trim cyl 4" + groupChildMenu = ignTrimTbl5, "Ignition trim cyl 5" + groupChildMenu = ignTrimTbl6, "Ignition trim cyl 6" + groupChildMenu = ignTrimTbl7, "Ignition trim cyl 7" + groupChildMenu = ignTrimTbl8, "Ignition trim cyl 8" + groupChildMenu = ignTrimTbl9, "Ignition trim cyl 9" + groupChildMenu = ignTrimTbl10, "Ignition trim cyl 10" + groupChildMenu = ignTrimTbl11, "Ignition trim cyl 11" + groupChildMenu = ignTrimTbl12, "Ignition trim cyl 12" + subMenu = std_separator + + subMenu = multisparkSettings, "Multispark", 0, {isIgnitionEnabled == 1} + + menu = "&Cranking" + subMenu = crankingDialog, "Cranking settings" + subMenu = postCrankingEnrichmentTbl,"After-start enrichment" + subMenu = primingFuelPulsePanel, "Priming pulse" + subMenu = std_separator + + subMenu = crankingCltCurve, "Fuel CLT multiplier" + subMenu = crankingCltCurveE100, "Fuel CLT multiplier (Flex Fuel E85)", 0, { flexSensorPin != 0 && flexCranking } + subMenu = crankingDurationCurve, "Fuel duration multiplier" + subMenu = crankingTpsCurve, "Fuel TPS multiplier" + subMenu = std_separator + + subMenu = crankingAdvanceCurve, "Cranking ignition advance", 0, {useSeparateAdvanceForCranking == 1} + subMenu = std_separator + + subMenu = cltCrankingCurve, "Cranking IAC CLT multiplier", 0, {overrideCrankingIacSetting == 1} + + menu = "&Idle" + subMenu = idleSettings, "Idle settings" + subMenu = idlehw, "Idle hardware" + subMenu = std_separator + subMenu = cltIdleRPMCurve, "Target RPM" + subMenu = cltIdleCurve, "CLT multiplier" + subMenu = std_separator + subMenu = idleTimingPidCorrDialog, "Closed-loop idle timing" + subMenu = iacPidMultTbl, "IAC PID multiplier", 0, {idleMode == 0 && useIacPidMultTable == 1} + subMenu = iacCoastingCurve, "Coasting IAC position", 0, {useIacTableForCoasting == 1} + subMenu = std_separator + subMenu = idleVeTableTbl, "Idle VE", 0, {useSeparateVeForIdle == 1} + subMenu = idleAdvanceCurve, "Ignition advance", 0, {useSeparateAdvanceForIdle == 1} + + menu = "&Advanced" + subMenu = smLaunchControl, "Launch Control" + subMenu = ignitionCylExtra, "Cylinder offsets", 0 + + subMenu = std_separator + subMenu = boostDialog, "Boost control" + subMenu = boostOpenLoopDialog, "Boost control open loop", { isBoostControlEnabled } + subMenu = boostOpenLoopGearAdderDialog, "Boost control open loop gear adder", { isBoostControlEnabled } + subMenu = boostPidDialog, "Boost control PID", { isBoostControlEnabled && boostType == 1 } + subMenu = boostTargetDialog, "Boost control target", { isBoostControlEnabled && boostType == 1 } + + groupMenu = "Boost blend tables" + groupChildMenu = boostOpenBlend1Cfg, "Open loop 1 bias", { isBoostControlEnabled } + groupChildMenu = boostOpenBlend1Table, "Open loop 1 adder", { isBoostControlEnabled && boostOpenLoopBlends1_blendParameter != 0 } + groupChildMenu = boostOpenBlend2Cfg, "Open loop 2 bias", { isBoostControlEnabled } + groupChildMenu = boostOpenBlend2Table, "Open loop 2 adder", { isBoostControlEnabled && boostOpenLoopBlends2_blendParameter != 0 } + groupChildMenu = boostClosedBlend1Cfg, "Closed loop 1 bias", { isBoostControlEnabled && boostType == 1 } + groupChildMenu = boostClosedBlend2Table, "Closed loop 1 adder", { isBoostControlEnabled && boostType == 1 && boostClosedLoopBlends1_blendParameter != 0 } + groupChildMenu = boostClosedBlend2Cfg, "Closed loop 2 bias", { isBoostControlEnabled && boostType == 1 } + groupChildMenu = boostClosedBlend2Table, "Closed loop 2 adder", { isBoostControlEnabled && boostType == 1 && boostClosedLoopBlends2_blendParameter != 0 } + + subMenu = boostEtbPid, "ETB-style Wastegate Actuator", { etbFunctions1 == 4 || etbFunctions2 == 4 } + + subMenu = std_separator + subMenu = gppwm1, "General Purpose PWM 1" + subMenu = gppwm2, "General Purpose PWM 2" + subMenu = gppwm3, "General Purpose PWM 3" + subMenu = gppwm4, "General Purpose PWM 4" + + subMenu = std_separator + subMenu = etbDialog, "Electronic throttle body" + subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" + subMenu = pedalToTpsTbl, "ETB pedal target" + subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } + + subMenu = std_separator + subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } + subMenu = vvtTable1Tbl, "VVT intake target", { vvtMode1 != 0 && vvtPins1 != 0 } + subMenu = vvtTable2Tbl, "VVT exhaust target", { vvtMode2 != 0 && vvtPins2 != 0 } + + subMenu = std_separator + subMenu = auxInputsDialog, "Lua Analog Inputs" + subMenu = luaDigitalInputsDialog, "Lua Digital Inputs" + subMenu = luaOutputs, "Lua Script PWM Outputs" + + groupMenu = "Lua Calibrations" + groupChildMenu = scriptSetting, "Lua Script Settings" + + groupChildMenu = scriptTable1TblSettings, "Script Table #1" + groupChildMenu = scriptTable2TblSettings, "Script Table #2" + groupChildMenu = scriptTable3TblSettings, "Script Table #3" + groupChildMenu = scriptTable4TblSettings, "Script Table #4" + + groupChildMenu = scriptCurve1Settings, "Script Curve #1" + groupChildMenu = scriptCurve2Settings, "Script Curve #2" + groupChildMenu = scriptCurve3Settings, "Script Curve #3" + groupChildMenu = scriptCurve4Settings, "Script Curve #4" + groupChildMenu = scriptCurve5Settings, "Script Curve #5" + groupChildMenu = scriptCurve6Settings, "Script Curve #6" + + subMenu = std_separator + subMenu = tcuControls, "Transmission Settings (alpha)" + subMenu = gearControls, "Gear Selection Settings (alpha)" + subMenu = inputSpeedSensor, "Input Speed Sensor (alpha)" + subMenu = tcuSolenoidTableTbl, "Shift Solenoids (alpha)" + subMenu = tccCurves, "TCC Lock/Unlock Speed (alpha)" + subMenu = pcPerGearDialog, "Line Pressure Per Gear (alpha)" + subMenu = pcPerShiftDialog, "Line Pressure Per Shift (alpha)" + subMenu = 32Dialog, "3-2 Shift Solenoid Percent by Speed (alpha)" + subMenu = rangeMatrixDialog, "Range Selector Input Matrix (alpha)" + + menu = "&Sensors" + # Base analog input settings + subMenu = otherSensorInputs, "Misc sensors" + subMenu = analogInputSettings, "Analog input settings" + subMenu = std_separator + + # Thermistors + subMenu = cltSensor, "CLT sensor" + subMenu = iatSensor, "IAT sensor" + subMenu = auxTempSensor1Sensor, "AuxTemp1 sensor" + subMenu = auxTempSensor2Sensor, "AuxTemp2 sensor" + subMenu = std_separator + + # TPS/pedal + subMenu = tpsSensor, "TPS" + subMenu = pedalSensor, "Accelerator pedal" + subMenu = std_separator + + # MAP/Baro + subMenu = mapSettings, "MAP sensor" + subMenu = mapCurves, "MAP sampling" + subMenu = baroSettings, "Baro sensor" + subMenu = std_separator + + # MAF + subMenu = mafSettings, "MAF sensor" + subMenu = mafDecodingCurve, "MAF transfer function", 0, {mafAdcChannel != 0 } + subMenu = std_separator + + # O2 sensor(s) + subMenu = egoSettings, "EGO sensor" + subMenu = widebandConfig, "rusEFI Wideband Controller", 0, { canReadEnabled && canWriteEnabled } + subMenu = narrowToWideOxygenCurve, "Narrow to Wideband approximation" + subMenu = std_separator + + # Misc sensors + subMenu = vrThreshold, "VR Sensor Threshold" + subMenu = speedSensor, "Vehicle speed sensor" + subMenu = oilPressureSensor, "Oil pressure" + subMenu = oilTempSensor, "Oil temp sensor" + subMenu = fuelPressureSensor, "Fuel pressure" + subMenu = fuelTempSensor, "Fuel temp sensor" + subMenu = fuelLevelDialog, "Fuel level sensor" + subMenu = ambientTempSensor, "Ambient temp sensor" + subMenu = compressorDischargeTemperature, "Compressor discharge temp" + subMenu = egtInputs, "EGT" + subMenu = wastegateIdlePos, "Wastegate and idle position sensors" + subMenu = std_separator + + subMenu = auxLinearSensors, "Aux Sensors" + + menu = "&Controller" + subMenu = ecuStimulator, "ECU stimulator" + subMenu = ioTest, "Bench test" + subMenu = injTest, "Injector test" + subMenu = engineTypeDialog, "Popular vehicles" + subMenu = std_separator + + subMenu = spiFunction, "SPI" + subMenu = monitoringSettings, "rusEFI console" + subMenu = std_separator + + subMenu = canBusMain, "CAN Bus Communication" + subMenu = sdCard, "SD Card Logger" + subMenu = connection, "Connection" + subMenu = tle8888, "TLE8888" + + subMenu = allPins1, "Full pinout 1/3" + subMenu = allPins2, "Full pinout 2/3" + subMenu = allPins3_1_and_2 "Full pinout 3/3" + subMenu = std_separator + + + # EXPERIMENTAL FEATURES + subMenu = mc33Dialog, "PT2001 control" + subMenu = hpfpCamDialog, "HPFP Cam Configuration" + subMenu = hpfpPumpDialog, "HPFP Pump Configuration", {hpfpCamLobes != 0} + subMenu = hpfpTargetTable, "HPFP Target Pressure", {hpfpCamLobes != 0} + subMenu = hpfpCompensationTable, "HPFP Pump Compensation", {hpfpCamLobes != 0} + subMenu = std_separator + subMenu = fancyHardwareDialog, "Fancy Hardware" + subMenu = std_separator + + + ; TODO: move lambdaProtection to the fuel menu once ready + ; https://github.com/FOME-Tech/fome-fw/issues/75 + subMenu = lambdaProtection, "Lambda Protection", 0, { isInjectionEnabled } + + subMenu = std_separator + + subMenu = std_separator + + subMenu = std_separator + subMenu = kLineDialog, "K-Line" + subMenu = parkingLot, "Experimental/Broken" + subMenu = parkingLot2, "Experimental 2" + subMenu = harleyAcr, "HD" + subMenu = antiLagDialog, "Anti-Lag ALS" + subMenu = rotaryDialog, "Rotary" + subMenu = throttleEffectiveArea, "Throttle effective area" + + menu = "Help" + subMenu = helpGeneral, "rusEFI Info" + + menu = "&View" + subMenu = fuel_computerDialog, "fuel_computer" + subMenu = ignition_stateDialog, "ignition_state" + subMenu = knock_controllerDialog, "knock_controller" + subMenu = throttle_modelDialog, "throttle_model" + subMenu = high_pressure_fuel_pumpDialog, "high_pressure_fuel_pump" + subMenu = injector_modelDialog, "injector_model" + subMenu = launch_control_stateDialog, "launch_control_state" + subMenu = antilag_system_stateDialog, "antilag_system_state" + subMenu = boost_controlDialog, "boost_control" + subMenu = ac_controlDialog, "ac_control" + subMenu = fan_controlDialog, "fan_control" + subMenu = fuel_pump_controlDialog, "fuel_pump_control" + subMenu = main_relayDialog, "main_relay" + subMenu = engine_stateDialog, "engine_state" + subMenu = tps_accel_stateDialog, "tps_accel_state" + subMenu = trigger_centralDialog, "trigger_central" + subMenu = trigger_stateDialog, "trigger_state" + subMenu = trigger_state_primaryDialog, "trigger_state_primary" + subMenu = wall_fuel_stateDialog, "wall_fuel_state" + subMenu = idle_stateDialog, "idle_state" + subMenu = electronic_throttleDialog, "electronic_throttle" + subMenu = wideband_stateDialog, "wideband_state" + subMenu = dc_motorsDialog, "dc_motors" + subMenu = sent_stateDialog, "sent_state" + subMenu = vvtDialog, "vvt" + subMenu = lambda_monitorDialog, "lambda_monitor" + + + +[ControllerCommands] +; commandName = command1, command2, commandn... +; command in standard ini format, a command name can be assigned to 1 to n commands that will be executed in order. +; This does not include any resultant protocol envelope data, only the response data itself. + +; WARNING!! These commands bypass TunerStudio's normal memory synchronization. If these commands +; alter mapped settings (Constant) memory in the controller, TunerStudio will have an out of sync condition +; and may create error messages. +; It is expected that these commands would not typically alter any ram mapped to a Constant. + +; +; see TS_IO_TEST_COMMAND in firmware code +; + +cmd_test_spk1 = "Z\x00\x12\x00\x01" +cmd_test_spk2 = "Z\x00\x12\x00\x02" +cmd_test_spk3 = "Z\x00\x12\x00\x03" +cmd_test_spk4 = "Z\x00\x12\x00\x04" +cmd_test_spk5 = "Z\x00\x12\x00\x05" +cmd_test_spk6 = "Z\x00\x12\x00\x06" +cmd_test_spk7 = "Z\x00\x12\x00\x07" +cmd_test_spk8 = "Z\x00\x12\x00\x08" +cmd_test_spk9 = "Z\x00\x12\x00\x09" +cmd_test_spk10 = "Z\x00\x12\x00\x0a" +cmd_test_spk11 = "Z\x00\x12\x00\x0b" +cmd_test_spk12 = "Z\x00\x12\x00\x0c" + +cmd_test_lua1 = "Z\x00\x20\x00\x01" +cmd_test_lua2 = "Z\x00\x20\x00\x02" +cmd_test_lua3 = "Z\x00\x20\x00\x03" +cmd_test_lua4 = "Z\x00\x20\x00\x04" +cmd_test_lua5 = "Z\x00\x20\x00\x05" +cmd_test_lua6 = "Z\x00\x20\x00\x06" +cmd_test_lua7 = "Z\x00\x20\x00\x07" +cmd_test_lua8 = "Z\x00\x20\x00\x08" + +cmd_test_inj1 = "Z\x00\x13\x00\x01" +cmd_test_inj2 = "Z\x00\x13\x00\x02" +cmd_test_inj3 = "Z\x00\x13\x00\x03" +cmd_test_inj4 = "Z\x00\x13\x00\x04" +cmd_test_inj5 = "Z\x00\x13\x00\x05" +cmd_test_inj6 = "Z\x00\x13\x00\x06" +cmd_test_inj7 = "Z\x00\x13\x00\x07" +cmd_test_inj8 = "Z\x00\x13\x00\x08" +cmd_test_inj9 = "Z\x00\x13\x00\x09" +cmd_test_inj10 = "Z\x00\x13\x00\x0a" +cmd_test_inj11 = "Z\x00\x13\x00\x0b" +cmd_test_inj12 = "Z\x00\x13\x00\x0c" + +cmd_test_cancel = "Z\x00\x16\x00\x0f" + +cmd_test_sol1 = "Z\x00\x19\x00\x01" +cmd_test_sol2 = "Z\x00\x19\x00\x02" +cmd_test_sol3 = "Z\x00\x19\x00\x03" +cmd_test_sol4 = "Z\x00\x19\x00\x04" +cmd_test_sol5 = "Z\x00\x19\x00\x05" +cmd_test_sol6 = "Z\x00\x19\x00\x06" + +cmd_test_main_relay = "Z\x00\x16\x00\x00" +cmd_test_fuel_pump = "Z\x00\x16\x00\x01" +cmd_test_starter_relay = "Z\x00\x16\x00\x02" +cmd_test_starter_disable_relay = "Z\x00\x16\x00\x03" +cmd_test_ac_relay = "Z\x00\x16\x00\x06" +cmd_test_fan_1 = "Z\x00\x16\x00\x04" +cmd_test_fan_2 = "Z\x00\x16\x00\x05" +cmd_test_check_engine_light = "Z\x00\x16\x00\x07" +cmd_test_idle_valve = "Z\x00\x16\x00\x08" +cmd_test_second_idle_valve = "Z\x00\x16\x00\x0e" +cmd_test_hpfp_valve = "Z\x00\x16\x00\x09" +cmd_test_acr_valve = "Z\x00\x16\x00\x1c" +cmd_test_acr2_valve = "Z\x00\x16\x00\x1d" +cmd_test_vvt0_valve = "Z\x00\x16\x00\x10" +cmd_test_vvt1_valve = "Z\x00\x16\x00\x11" +cmd_test_vvt2_valve = "Z\x00\x16\x00\x12" +cmd_test_vvt3_valve = "Z\x00\x16\x00\x13" + +cmd_calibrate_tps_1_closed = "Z\x00\x14\x00\x02" +cmd_calibrate_tps_1_wot = "Z\x00\x14\x00\x03" +cmd_calibrate_tps_2_closed = "Z\x00\x14\x00\x04" +cmd_calibrate_tps_2_wot = "Z\x00\x14\x00\x05" +cmd_calibrate_pedal_up = "Z\x00\x14\x00\x06" +cmd_calibrate_pedal_down = "Z\x00\x14\x00\x07" +cmd_tle8888_init = "Z\x00\x14\x00\x08" +cmd_write_config = "Z\x00\x14\x00\x0a" +cmd_etb_reset = "Z\x00\x14\x00\x0b" +cmd_etb_autotune = "Z\x00\x14\x00\x0C" +cmd_enable_self_stim = "Z\x00\x14\x00\x0D" +cmd_etb_auto_calibrate = "Z\x00\x14\x00\x0E" +cmd_disable_self_stim = "Z\x00\x14\x00\x0F" +cmd_etb_autotune_stop = "Z\x00\x14\x00\x10" +cmd_etb_auto_calibrate_2 = "Z\x00\x14\x00\x11" +cmd_wideband_firmare_update = "Z\x00\x14\x00\x12" +cmd_enable_ext_stim = "Z\x00\x14\x00\x13" +cmd_burn_without_flash = "Z\x00\x14\x00\x15" + +cmd_set_wideband_idx_0 = "Z\x00\x15\x00\x00" +cmd_set_wideband_idx_1 = "Z\x00\x15\x00\x01" + +cmd_stop_engine = "Z\x00\x79\x00\x00" + +; reboot ECU +cmd_reset_controller = "Z\x00\xbb\x00\x00" +; jump to DFU mode +cmd_dfu = "Z\x00\xba\x00\x00" +; jump to OpenBLT bootloader +cmd_openblt = "Z\x00\xbc\x00\x00" + +; See 'executeTSCommand' in firmware source code + + +cmd_set_engine_type_microRusEFI_VW_B6 = "Z\x00\x1e\x00\x3e" +cmd_set_engine_type_microRusEFI_MRE_BODY_CONTROL = "Z\x00\x1e\x00\x17" +cmd_set_engine_type_MRE_SECONDARY_CAN = "Z\x00\x1e\x00\x04" + +cmd_set_engine_type_microRusEFI_Miata_NA6_MAP = "Z\x00\x1e\x00\x42" + +cmd_set_engine_type_microRusEFI_Miata_94_MAP = "Z\x00\x1e\x00\x14" + +cmd_set_engine_type_MRE_SUBARU_EJ18 = "Z\x00\x1e\x00\x25" + +; cmd_set_engine_type_ = "Z\x00\x1e@@engine_type_e_ +cmd_set_engine_type_MITSUBISHI_3A92 = "Z\x00\x1e\x00\x0c" +cmd_set_engine_type_MITSUBISHI_4G93 = "Z\x00\x1e\x00\x10" +cmd_set_engine_type_TOYOTA_1NZ_FE = "Z\x00\x1e\x00\x0d" + +cmd_set_engine_type_MRE_M111 = "Z\x00\x1e\x00\x44" + +cmd_set_engine_type_hellen_NA6 = "Z\x00\x1e\x00\x22" +cmd_set_engine_type_hellen_NA94 = "Z\x00\x1e\x00\x50" + +cmd_set_engine_type_hellen_NB1_36 = "Z\x00\x1e\x00\x5e" +cmd_set_engine_type_hellen_NB2_36 = "Z\x00\x1e\x00\x56" + +cmd_set_engine_type_hellen_nissan_121_4 = "Z\x00\x1e\x00\x54" +cmd_set_engine_type_hellen_nissan_121_6 = "Z\x00\x1e\x00\x48" +cmd_set_engine_type_hellen_nissan_121_8 = "Z\x00\x1e\x00\x55" + +cmd_set_engine_type_hellen_121_vag_4 = "Z\x00\x1e\x00\x47" +cmd_set_engine_type_hellen_121_vag_5 = "Z\x00\x1e\x00\x4d" +cmd_set_engine_type_hellen_121_vag_v6 = "Z\x00\x1e\x00\x4e" +cmd_set_engine_type_hellen_121_vag_vr6 = "Z\x00\x1e\x00\x4f" +cmd_set_engine_type_hellen_121_vag_8 = "Z\x00\x1e\x00\x51" + +cmd_set_engine_type_hellen_128_merc_4 = "Z\x00\x1e\x00\x24" +cmd_set_engine_type_hellen_128_merc_6 = "Z\x00\x1e\x00\x58" +cmd_set_engine_type_hellen_128_merc_8 = "Z\x00\x1e\x00\x59" + +cmd_set_engine_type_hellen_coupe_bk1 = "Z\x00\x1e\x00\x52" +cmd_set_engine_type_hellen_coupe_bk2 = "Z\x00\x1e\x00\x5f" + +; MIATA_NA6_MAP = 41 +cmd_set_engine_type_Frankenso_Miata_NA6_MAP = "Z\x00\x1e\x00\x29" +; MAZDA_MIATA_2003 = 47 +cmd_set_engine_type_Frankenso_Miata_NB2 = "Z\x00\x1e\x00\x2f" + +cmd_set_engine_type_FUEL_BENCH = "Z\x00\x1e\x00\x0f" + + + + + +; ETB_BENCH_ENGINE = 58 +cmd_set_engine_type_etb_test = "Z\x00\x1e\x00\x3A" +; ETB_BENCH_ENGINE = 59 +cmd_set_engine_type_8888_test = "Z\x00\x1e\x00\x3B" +cmd_set_engine_type_default = "Z\x00\x1f\x00\x00" + +[UserDefined] +indicatorPanel = fuel_computerIndicatorPanel, 2 + indicator = {injectorHwIssue}, "injectorHwIssue No", "injectorHwIssue Yes" + +dialog = fuel_computerDialog, "fuel_computer" + panel = fuel_computerIndicatorPanel + liveGraph = fuel_computer_1_Graph, "Graph", South + graphLine = totalFuelCorrection + graphLine = running_postCrankingFuelCorrection + graphLine = running_intakeTemperatureCoefficient + graphLine = running_coolantTemperatureCoefficient + liveGraph = fuel_computer_2_Graph, "Graph", South + graphLine = running_timeSinceCrankingInSecs + graphLine = running_baseFuel + graphLine = running_fuel + graphLine = afrTableYAxis + liveGraph = fuel_computer_3_Graph, "Graph", South + graphLine = targetLambda + graphLine = targetAFR + graphLine = stoichiometricRatio + graphLine = sdTcharge_coff + liveGraph = fuel_computer_4_Graph, "Graph", South + graphLine = sdAirMassInOneCylinder + graphLine = normalizedCylinderFilling + graphLine = brokenInjector + +indicatorPanel = ignition_stateIndicatorPanel, 2 + indicator = {luaIgnitionSkip}, "luaIgnitionSkip No", "luaIgnitionSkip Yes" + +dialog = ignition_stateDialog, "ignition_state" + panel = ignition_stateIndicatorPanel + liveGraph = ignition_state_1_Graph, "Graph", South + graphLine = baseDwell + graphLine = sparkDwell + graphLine = dwellAngle + graphLine = cltTimingCorrection + liveGraph = ignition_state_2_Graph, "Graph", South + graphLine = timingIatCorrection + graphLine = timingPidCorrection + graphLine = baseIgnitionAdvance + graphLine = correctedIgnitionAdvance + liveGraph = ignition_state_3_Graph, "Graph", South + graphLine = dwellVoltageCorrection + graphLine = luaTimingAdd + graphLine = luaTimingMult + + +dialog = knock_controllerDialog, "knock_controller" + liveGraph = knock_controller_1_Graph, "Graph", South + graphLine = m_knockLevel + graphLine = m_knockCyl1 + graphLine = m_knockCyl2 + graphLine = m_knockCyl3 + liveGraph = knock_controller_2_Graph, "Graph", South + graphLine = m_knockCyl4 + graphLine = m_knockCyl5 + graphLine = m_knockCyl6 + graphLine = m_knockCyl7 + liveGraph = knock_controller_3_Graph, "Graph", South + graphLine = m_knockCyl8 + graphLine = m_knockCyl9 + graphLine = m_knockCyl10 + graphLine = m_knockCyl11 + liveGraph = knock_controller_4_Graph, "Graph", South + graphLine = m_knockCyl12 + graphLine = m_knockRetard + graphLine = m_knockThreshold + graphLine = m_knockCount + liveGraph = knock_controller_5_Graph, "Graph", South + graphLine = m_maximumRetard + +indicatorPanel = throttle_modelIndicatorPanel, 2 + indicator = {throttleUseWotModel}, "throttleUseWotModel No", "throttleUseWotModel Yes" + +dialog = throttle_modelDialog, "throttle_model" + panel = throttle_modelIndicatorPanel + liveGraph = throttle_model_1_Graph, "Graph", South + graphLine = throttleModelCrossoverAngle + graphLine = throttleEstimatedFlow + +indicatorPanel = high_pressure_fuel_pumpIndicatorPanel, 2 + indicator = {noValve}, "noValve No", "noValve Yes" + indicator = {angleAboveMin}, "angleAboveMin No", "angleAboveMin Yes" + indicator = {isHpfpInactive}, "isHpfpInactive No", "isHpfpInactive Yes" + +dialog = high_pressure_fuel_pumpDialog, "high_pressure_fuel_pump" + panel = high_pressure_fuel_pumpIndicatorPanel + liveGraph = high_pressure_fuel_pump_1_Graph, "Graph", South + graphLine = m_requested_pump + graphLine = fuel_requested_percent + graphLine = fuel_requested_percent_pi + graphLine = m_pressureTarget_kPa + liveGraph = high_pressure_fuel_pump_2_Graph, "Graph", South + graphLine = nextLobe + graphLine = di_nextStart + + +dialog = injector_modelDialog, "injector_model" + liveGraph = injector_model_1_Graph, "Graph", South + graphLine = m_deadtime + graphLine = pressureDelta + graphLine = pressureRatio + +indicatorPanel = launch_control_stateIndicatorPanel, 2 + indicator = {combinedConditions}, "combinedConditions No", "combinedConditions Yes" + indicator = {launchActivatePinState}, "launchActivatePinState No", "launchActivatePinState Yes" + indicator = {isLaunchCondition}, "isLaunchCondition No", "isLaunchCondition Yes" + indicator = {isSwitchActivated}, "isSwitchActivated No", "isSwitchActivated Yes" + indicator = {isClutchActivated}, "isClutchActivated No", "isClutchActivated Yes" + indicator = {isValidInputPin}, "isValidInputPin No", "isValidInputPin Yes" + indicator = {activateSwitchCondition}, "activateSwitchCondition No", "activateSwitchCondition Yes" + indicator = {rpmCondition}, "rpmCondition No", "rpmCondition Yes" + indicator = {speedCondition}, "speedCondition No", "speedCondition Yes" + indicator = {tpsCondition}, "tpsCondition No", "tpsCondition Yes" + +dialog = launch_control_stateDialog, "launch_control_state" + panel = launch_control_stateIndicatorPanel + liveGraph = launch_control_state_1_Graph, "Graph", South + graphLine = retardThresholdRpm + +indicatorPanel = antilag_system_stateIndicatorPanel, 2 + indicator = {isAntilagCondition}, "isAntilagCondition No", "isAntilagCondition Yes" + indicator = {ALSMinRPMCondition}, "ALSMinRPMCondition No", "ALSMinRPMCondition Yes" + indicator = {ALSMaxRPMCondition}, "ALSMaxRPMCondition No", "ALSMaxRPMCondition Yes" + indicator = {ALSMinCLTCondition}, "ALSMinCLTCondition No", "ALSMinCLTCondition Yes" + indicator = {ALSMaxCLTCondition}, "ALSMaxCLTCondition No", "ALSMaxCLTCondition Yes" + indicator = {ALSMaxThrottleIntentCondition}, "ALSMaxThrottleIntentCondition No", "ALSMaxThrottleIntentCondition Yes" + indicator = {isALSSwitchActivated}, "isALSSwitchActivated No", "isALSSwitchActivated Yes" + indicator = {ALSActivatePinState}, "ALSActivatePinState No", "ALSActivatePinState Yes" + indicator = {ALSSwitchCondition}, "ALSSwitchCondition No", "ALSSwitchCondition Yes" + indicator = {ALSTimerCondition}, "ALSTimerCondition No", "ALSTimerCondition Yes" + +dialog = antilag_system_stateDialog, "antilag_system_state" + panel = antilag_system_stateIndicatorPanel + liveGraph = antilag_system_state_1_Graph, "Graph", South + graphLine = fuelALSCorrection + graphLine = timingALSCorrection + graphLine = timingALSSkip + +indicatorPanel = boost_controlIndicatorPanel, 2 + indicator = {isTpsInvalid}, "isTpsInvalid No", "isTpsInvalid Yes" + indicator = {m_shouldResetPid}, "m_shouldResetPid No", "m_shouldResetPid Yes" + indicator = {isBelowClosedLoopThreshold}, "isBelowClosedLoopThreshold No", "isBelowClosedLoopThreshold Yes" + indicator = {isNotClosedLoop}, "isNotClosedLoop No", "isNotClosedLoop Yes" + indicator = {isZeroRpm}, "isZeroRpm No", "isZeroRpm Yes" + indicator = {hasInitBoost}, "hasInitBoost No", "hasInitBoost Yes" + indicator = {rpmTooLow}, "rpmTooLow No", "rpmTooLow Yes" + indicator = {tpsTooLow}, "tpsTooLow No", "tpsTooLow Yes" + indicator = {mapTooLow}, "mapTooLow No", "mapTooLow Yes" + indicator = {isPlantValid}, "isPlantValid No", "isPlantValid Yes" + +dialog = boost_controlDialog, "boost_control" + panel = boost_controlIndicatorPanel + liveGraph = boost_control_1_Graph, "Graph", South + graphLine = luaTargetAdd + graphLine = boostOutput + graphLine = luaTargetMult + graphLine = openLoopPart + liveGraph = boost_control_2_Graph, "Graph", South + graphLine = luaOpenLoopAdd + graphLine = boostControllerClosedLoopPart + graphLine = boostControlTarget + +indicatorPanel = ac_controlIndicatorPanel, 2 + indicator = {m_acEnabled}, "m_acEnabled No", "m_acEnabled Yes" + indicator = {engineTooSlow}, "engineTooSlow No", "engineTooSlow Yes" + indicator = {engineTooFast}, "engineTooFast No", "engineTooFast Yes" + indicator = {noClt}, "noClt No", "noClt Yes" + indicator = {engineTooHot}, "engineTooHot No", "engineTooHot Yes" + indicator = {tpsTooHigh}, "tpsTooHigh No", "tpsTooHigh Yes" + indicator = {isDisabledByLua}, "isDisabledByLua No", "isDisabledByLua Yes" + indicator = {acCompressorState}, "acCompressorState No", "acCompressorState Yes" + +dialog = ac_controlDialog, "ac_control" + panel = ac_controlIndicatorPanel + liveGraph = ac_control_1_Graph, "Graph", South + graphLine = acButtonState + graphLine = latest_usage_ac_control + graphLine = acSwitchLastChangeTimeMs + +indicatorPanel = fan_controlIndicatorPanel, 2 + indicator = {cranking}, "cranking No", "cranking Yes" + indicator = {notRunning}, "notRunning No", "notRunning Yes" + indicator = {disabledWhileEngineStopped}, "disabledWhileEngineStopped No", "disabledWhileEngineStopped Yes" + indicator = {brokenClt}, "brokenClt No", "brokenClt Yes" + indicator = {enabledForAc}, "enabledForAc No", "enabledForAc Yes" + indicator = {hot}, "hot No", "hot Yes" + indicator = {cold}, "cold No", "cold Yes" + +dialog = fan_controlDialog, "fan_control" + panel = fan_controlIndicatorPanel + +indicatorPanel = fuel_pump_controlIndicatorPanel, 2 + indicator = {isPrime}, "isPrime No", "isPrime Yes" + indicator = {engineTurnedRecently}, "engineTurnedRecently No", "engineTurnedRecently Yes" + indicator = {isFuelPumpOn}, "isFuelPumpOn No", "isFuelPumpOn Yes" + indicator = {ignitionOn}, "ignitionOn No", "ignitionOn Yes" + +dialog = fuel_pump_controlDialog, "fuel_pump_control" + panel = fuel_pump_controlIndicatorPanel + +indicatorPanel = main_relayIndicatorPanel, 2 + indicator = {isBenchTest}, "isBenchTest No", "isBenchTest Yes" + indicator = {hasIgnitionVoltage}, "hasIgnitionVoltage No", "hasIgnitionVoltage Yes" + indicator = {mainRelayState}, "mainRelayState No", "mainRelayState Yes" + indicator = {delayedShutoffRequested}, "delayedShutoffRequested No", "delayedShutoffRequested Yes" + +dialog = main_relayDialog, "main_relay" + panel = main_relayIndicatorPanel + +indicatorPanel = engine_stateIndicatorPanel, 2 + indicator = {lua_clutchUpState}, "clutchUpState No", "clutchUpState Yes" + indicator = {lua_brakePedalState}, "brakePedalState No", "brakePedalState Yes" + indicator = {lua_acRequestState}, "acRequestState No", "acRequestState Yes" + indicator = {lua_luaDisableEtb}, "luaDisableEtb No", "luaDisableEtb Yes" + indicator = {lua_luaIgnCut}, "luaIgnCut No", "luaIgnCut Yes" + indicator = {startStopPhysicalState}, "startStopPhysicalState No", "startStopPhysicalState Yes" + indicator = {acrStateDup}, "acrStateDup No", "acrStateDup Yes" + indicator = {acrEngineMovedRecently}, "acrEngineMovedRecently No", "acrEngineMovedRecently Yes" + indicator = {heaterControlEnabled}, "heaterControlEnabled No", "heaterControlEnabled Yes" + indicator = {luaDigitalState0}, "luaDigitalState0 No", "luaDigitalState0 Yes" + indicator = {luaDigitalState1}, "luaDigitalState1 No", "luaDigitalState1 Yes" + indicator = {luaDigitalState2}, "luaDigitalState2 No", "luaDigitalState2 Yes" + indicator = {luaDigitalState3}, "luaDigitalState3 No", "luaDigitalState3 Yes" + +dialog = engine_stateDialog, "engine_state" + panel = engine_stateIndicatorPanel + liveGraph = engine_state_1_Graph, "Graph", South + graphLine = lua_fuelAdd + graphLine = lua_fuelMult + graphLine = sd_tCharge + graphLine = sd_tChargeK + liveGraph = engine_state_2_Graph, "Graph", South + graphLine = crankingFuel_coolantTemperatureCoefficient + graphLine = crankingFuel_tpsCoefficient + graphLine = crankingFuel_durationCoefficient + graphLine = crankingFuel_fuel + liveGraph = engine_state_3_Graph, "Graph", South + graphLine = baroCorrection + graphLine = hellenBoardId + graphLine = clutchUpState + graphLine = clutchDownState + liveGraph = engine_state_4_Graph, "Graph", South + graphLine = brakePedalState + graphLine = startStopState + graphLine = startStopStateToggleCounter + graphLine = egtValue1 + liveGraph = engine_state_5_Graph, "Graph", South + graphLine = egtValue2 + graphLine = desiredRpmLimit + graphLine = fuelInjectionCounter + graphLine = sparkCounter + liveGraph = engine_state_6_Graph, "Graph", South + graphLine = fuelingLoad + graphLine = ignitionLoad + graphLine = veTableYAxis + +indicatorPanel = tps_accel_stateIndicatorPanel, 2 + indicator = {isAboveAccelThreshold}, "isAboveAccelThreshold No", "isAboveAccelThreshold Yes" + indicator = {isBelowDecelThreshold}, "isBelowDecelThreshold No", "isBelowDecelThreshold Yes" + indicator = {isTimeToResetAccumulator}, "isTimeToResetAccumulator No", "isTimeToResetAccumulator Yes" + indicator = {isFractionalEnrichment}, "isFractionalEnrichment No", "isFractionalEnrichment Yes" + indicator = {belowEpsilon}, "belowEpsilon No", "belowEpsilon Yes" + indicator = {tooShort}, "tooShort No", "tooShort Yes" + +dialog = tps_accel_stateDialog, "tps_accel_state" + panel = tps_accel_stateIndicatorPanel + liveGraph = tps_accel_state_1_Graph, "Graph", South + graphLine = tpsFrom + graphLine = tpsTo + graphLine = deltaTps + graphLine = extraFuel + liveGraph = tps_accel_state_2_Graph, "Graph", South + graphLine = valueFromTable + graphLine = fractionalInjFuel + graphLine = accumulatedValue + graphLine = maxExtraPerCycle + liveGraph = tps_accel_state_3_Graph, "Graph", South + graphLine = maxExtraPerPeriod + graphLine = maxInjectedPerPeriod + graphLine = cycleCnt + +indicatorPanel = trigger_centralIndicatorPanel, 2 + indicator = {isDecodingMapCam}, "isDecodingMapCam No", "isDecodingMapCam Yes" + +dialog = trigger_centralDialog, "trigger_central" + panel = trigger_centralIndicatorPanel + liveGraph = trigger_central_1_Graph, "Graph", South + graphLine = hwEventCounters1 + graphLine = hwEventCounters2 + graphLine = hwEventCounters3 + graphLine = hwEventCounters4 + liveGraph = trigger_central_2_Graph, "Graph", South + graphLine = hwEventCounters5 + graphLine = hwEventCounters6 + graphLine = vvtCamCounter + graphLine = mapVvt_MAP_AT_SPECIAL_POINT + liveGraph = trigger_central_3_Graph, "Graph", South + graphLine = mapVvt_MAP_AT_DIFF + graphLine = mapVvt_MAP_AT_CYCLE_COUNT + graphLine = mapVvt_map_peak + graphLine = currentEngineDecodedPhase + liveGraph = trigger_central_4_Graph, "Graph", South + graphLine = triggerToothAngleError + graphLine = triggerIgnoredToothCount + graphLine = mapCamPrevToothAngle + + +dialog = trigger_stateDialog, "trigger_state" + liveGraph = trigger_state_1_Graph, "Graph", South + graphLine = crankSynchronizationCounter + graphLine = vvtSyncGapRatio + graphLine = vvtToothDurations0 + graphLine = vvtCurrentPosition + liveGraph = trigger_state_2_Graph, "Graph", South + graphLine = vvtToothPosition1 + graphLine = vvtToothPosition2 + graphLine = vvtToothPosition3 + graphLine = vvtToothPosition4 + liveGraph = trigger_state_3_Graph, "Graph", South + graphLine = triggerSyncGapRatio + graphLine = triggerStateIndex + graphLine = camResyncCounter + graphLine = vvtStateIndex + +indicatorPanel = trigger_state_primaryIndicatorPanel, 2 + indicator = {m_hasSynchronizedPhase}, "m_hasSynchronizedPhase No", "m_hasSynchronizedPhase Yes" + +dialog = trigger_state_primaryDialog, "trigger_state_primary" + panel = trigger_state_primaryIndicatorPanel + + +dialog = wall_fuel_stateDialog, "wall_fuel_state" + liveGraph = wall_fuel_state_1_Graph, "Graph", South + graphLine = wallFuelCorrection + graphLine = wallFuel + +indicatorPanel = idle_stateIndicatorPanel, 2 + indicator = {mightResetPid}, "mightResetPid No", "mightResetPid Yes" + indicator = {shouldResetPid}, "shouldResetPid No", "shouldResetPid Yes" + indicator = {wasResetPid}, "wasResetPid No", "wasResetPid Yes" + indicator = {mustResetPid}, "mustResetPid No", "mustResetPid Yes" + indicator = {isCranking}, "isCranking No", "isCranking Yes" + indicator = {isIacTableForCoasting}, "isIacTableForCoasting No", "isIacTableForCoasting Yes" + indicator = {notIdling}, "notIdling No", "notIdling Yes" + indicator = {needReset}, "needReset No", "needReset Yes" + indicator = {isInDeadZone}, "isInDeadZone No", "isInDeadZone Yes" + indicator = {isBlipping}, "isBlipping No", "isBlipping Yes" + indicator = {useClosedLoop}, "useClosedLoop No", "useClosedLoop Yes" + indicator = {badTps}, "badTps No", "badTps Yes" + indicator = {looksLikeRunning}, "looksLikeRunning No", "looksLikeRunning Yes" + indicator = {looksLikeCoasting}, "looksLikeCoasting No", "looksLikeCoasting Yes" + indicator = {looksLikeCrankToIdle}, "looksLikeCrankToIdle No", "looksLikeCrankToIdle Yes" + indicator = {isIdleCoasting}, "isIdleCoasting No", "isIdleCoasting Yes" + indicator = {isIdleClosedLoop}, "isIdleClosedLoop No", "isIdleClosedLoop Yes" + +dialog = idle_stateDialog, "idle_state" + panel = idle_stateIndicatorPanel + liveGraph = idle_state_1_Graph, "Graph", South + graphLine = idleState + graphLine = currentIdlePosition + graphLine = baseIdlePosition + graphLine = idleClosedLoop + liveGraph = idle_state_2_Graph, "Graph", South + graphLine = iacByTpsTaper + graphLine = throttlePedalUpState + graphLine = idleTarget + graphLine = targetRpmByClt + liveGraph = idle_state_3_Graph, "Graph", South + graphLine = targetRpmAc + graphLine = iacByRpmTaper + graphLine = luaAdd + +indicatorPanel = electronic_throttleIndicatorPanel, 2 + indicator = {etbRevLimitActive}, "etbRevLimitActive No", "etbRevLimitActive Yes" + indicator = {jamDetected}, "jamDetected No", "jamDetected Yes" + +dialog = electronic_throttleDialog, "electronic_throttle" + panel = electronic_throttleIndicatorPanel + liveGraph = electronic_throttle_1_Graph, "Graph", South + graphLine = idlePosition + graphLine = trim + graphLine = luaAdjustment + graphLine = m_wastegatePosition + liveGraph = electronic_throttle_2_Graph, "Graph", South + graphLine = etbFeedForward + graphLine = etbIntegralError + graphLine = etbCurrentTarget + graphLine = etbCurrentAdjustedTarget + liveGraph = electronic_throttle_3_Graph, "Graph", South + graphLine = etbDutyRateOfChange + graphLine = etbDutyAverage + graphLine = etbTpsErrorCounter + graphLine = etbPpsErrorCounter + liveGraph = electronic_throttle_4_Graph, "Graph", South + graphLine = etbErrorCode + graphLine = jamTimer + + +dialog = wideband_stateDialog, "wideband_state" + liveGraph = wideband_state_1_Graph, "Graph", South + graphLine = faultCode + graphLine = heaterDuty + graphLine = pumpDuty + graphLine = tempC + liveGraph = wideband_state_2_Graph, "Graph", South + graphLine = nernstVoltage + graphLine = esr + +indicatorPanel = dc_motorsIndicatorPanel, 2 + indicator = {isEnabled0}, "isEnabled0 No", "isEnabled0 Yes" + +dialog = dc_motorsDialog, "dc_motors" + panel = dc_motorsIndicatorPanel + liveGraph = dc_motors_1_Graph, "Graph", South + graphLine = dcOutput0 + graphLine = isEnabled0_int + + +dialog = sent_stateDialog, "sent_state" + liveGraph = sent_state_1_Graph, "Graph", South + graphLine = value0 + graphLine = value1 + graphLine = errorRate + + +dialog = vvtDialog, "vvt" + liveGraph = vvt_1_Graph, "Graph", South + graphLine = vvtTarget + graphLine = vvtOutput + +indicatorPanel = lambda_monitorIndicatorPanel, 2 + indicator = {lambdaCurrentlyGood}, "lambdaCurrentlyGood No", "lambdaCurrentlyGood Yes" + indicator = {lambdaMonitorCut}, "lambdaMonitorCut No", "lambdaMonitorCut Yes" + +dialog = lambda_monitorDialog, "lambda_monitor" + panel = lambda_monitorIndicatorPanel + liveGraph = lambda_monitor_1_Graph, "Graph", South + graphLine = lambdaTimeSinceGood + + + + dialog = scriptTable1TblSettings, "", yAxis + field = "Name", scriptTableName1 + panel = scriptTable1Tbl + + dialog = scriptTable2TblSettings, "", yAxis + field = "Name", scriptTableName2 + panel = scriptTable2Tbl + + dialog = scriptTable3TblSettings, "", yAxis + field = "Name", scriptTableName3 + panel = scriptTable3Tbl + + dialog = scriptTable4TblSettings, "", yAxis + field = "Name", scriptTableName4 + panel = scriptTable4Tbl + + dialog = scriptCurve1Settings, "", yAxis + field = "Name", scriptCurveName1 + panel = scriptCurve1 + + dialog = scriptCurve2Settings, "", yAxis + field = "Name", scriptCurveName2 + panel = scriptCurve2 + + dialog = scriptCurve3Settings, "", yAxis + field = "Name", scriptCurveName3 + panel = scriptCurve3 + + dialog = scriptCurve4Settings, "", yAxis + field = "Name", scriptCurveName4 + panel = scriptCurve4 + + dialog = scriptCurve5Settings, "", yAxis + field = "Name", scriptCurveName5 + panel = scriptCurve5 + + dialog = scriptCurve6Settings, "", yAxis + field = "Name", scriptCurveName6 + panel = scriptCurve6 + + dialog = tChargeRpmTpsSettings, "RPM+TPS mode" + field = "We use these coefficients to approximate air/fuel charge" + field = "temperature based on CLT and IAT, depending on RPM and TPM" + field = "Low RPM/Low TPS", tChargeMinRpmMinTps + field = "Low RPM/High TPS", tChargeMinRpmMaxTps + field = "High RPM/Low TPS", tChargeMaxRpmMinTps + field = "High RPM/High TPS", tChargeMaxRpmMaxTps + + dialog = tChargeGeneralSettings, "" + field = "Mode", tChargeMode + field = "#These two parameters limit the estimate's rate of change" + field = "Increase rate limit", tChargeAirIncrLimit + field = "Decrease rate limit", tChargeAirDecrLimit + field = "" + + dialog = tChargeAirInterpSettings, "Airflow interpolation mode" + field = "Low flow coefficient", tChargeAirCoefMin + field = "High flow coefficient", tChargeAirCoefMax + field = "Max air flow", tChargeAirFlowMax + + dialog = tChargeSettings, "Charge temperature estimation" + panel = tChargeGeneralSettings + panel = tChargeRpmTpsSettings, { tChargeMode == 0} + panel = tChargeAirInterpSettings, { tChargeMode == 1} + panel = tchargeCurve, { tChargeMode == 2 } + + dialog = baseInjection, "Injection" + field = "Enabled", isInjectionEnabled + field = "Mode", injectionMode, {isInjectionEnabled == 1} + field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } + field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } + field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } + field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } + + dialog = ignitionOutputs, "Ignition Outputs" + field = "# wire each output to the corresponding cylinder number" + field = "# rusEFI handles firing order" + field = "Ignition Output Mode", ignitionPinMode, {isIgnitionEnabled == 1} + field = "Ignition Output 1", ignitionPins1, {isIgnitionEnabled == 1} + ; see rusefi_config.txt comment next to 'ignitionPin2logic' which says + ; this section is auto-generated by FiringOrderTSLogic.java + field = "Ignition Output 2", ignitionPins2, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 2) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 2) || (firingOrder == 7) || (firingOrder == 9) || (firingOrder == 11) || (firingOrder == 12) || (firingOrder == 16) || (firingOrder == 19) || (firingOrder == 20) || (firingOrder == 23) || (firingOrder == 25) || (firingOrder == 29)))} + field = "Ignition Output 3", ignitionPins3, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 3) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 1) || (firingOrder == 3) || (firingOrder == 4) || (firingOrder == 5) || (firingOrder == 9) || (firingOrder == 13) || (firingOrder == 14) || (firingOrder == 15) || (firingOrder == 18) || (firingOrder == 20) || (firingOrder == 23) || (firingOrder == 25) || (firingOrder == 27) || (firingOrder == 28)))} + field = "Ignition Output 4", ignitionPins4, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 4) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 5) || (firingOrder == 7) || (firingOrder == 12) || (firingOrder == 14) || (firingOrder == 16) || (firingOrder == 17) || (firingOrder == 22) || (firingOrder == 23) || (firingOrder == 25) || (firingOrder == 26) || (firingOrder == 27) || (firingOrder == 31)))} + field = "Ignition Output 5", ignitionPins5, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 5) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 4) || (firingOrder == 12) || (firingOrder == 15) || (firingOrder == 18) || (firingOrder == 23) || (firingOrder == 26) || (firingOrder == 30) || (firingOrder == 31)))} + field = "Ignition Output 6", ignitionPins6, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 6) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 13) || (firingOrder == 22) || (firingOrder == 23) || (firingOrder == 29) || (firingOrder == 30)))} + field = "Ignition Output 7", ignitionPins7, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 7) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 11) || (firingOrder == 15) || (firingOrder == 16) || (firingOrder == 19) || (firingOrder == 20) || (firingOrder == 22) || (firingOrder == 28)))} + field = "Ignition Output 8", ignitionPins8, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 8) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 5) || (firingOrder == 11) || (firingOrder == 16) || (firingOrder == 18) || (firingOrder == 19) || (firingOrder == 26) || (firingOrder == 28)))} + field = "Ignition Output 9", ignitionPins9, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 9) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 14) || (firingOrder == 15) || (firingOrder == 22)))} + field = "Ignition Output 10", ignitionPins10, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 10) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 14) || (firingOrder == 16) || (firingOrder == 18)))} + field = "Ignition Output 11", ignitionPins11, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 11) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 15)))} + field = "Ignition Output 12", ignitionPins12, {isIgnitionEnabled == 1 && (ignitionMode != 0 && cylindersCount >= 12) && (ignitionMode !=2 || twoWireBatchIgnition == 1 || ((firingOrder == 18) || (firingOrder == 22)))} + + + dialog = ignitionBasic, "" + field = "Enabled", isIgnitionEnabled + field = "Mode", ignitionMode, {isIgnitionEnabled} + field = "Maximum timing advance", maximumIgnitionTiming, {isIgnitionEnabled} + field = "Minimum timing advance", minimumIgnitionTiming, {isIgnitionEnabled} + field = "Individually wired Wasted Spark", twoWireBatchIgnition, {isIgnitionEnabled == 1 && ignitionMode == 2 } + field = "Override ignition table load axis", ignOverrideMode, {isIgnitionEnabled} + field = "#Use fixed timing while validating with a timing gun" + field = "Timing Mode", timingMode, {isIgnitionEnabled} + field = "Fixed Timing", fixedTiming, {isIgnitionEnabled == 1 && timingMode == 1} + + dialog = ignitionSettings, "", xAxis + panel = ignitionBasic + panel = ignitionOutputs, { uiMode == 0 || uiMode == 1 } + + dialog = baseEngineConfig, "Engine Configuration" +; field = "Engine preset", engineType + field = "Number of cylinders", cylindersCount + field = "Displacement", displacement + field = "Firing order", firingOrder + field = "Vehicle weight", vehicleWeight + + dialog = engineMetadata, "Engine Metadata" + field = "#These metadata are used by rusEFI Online" + field = "Engine Make", engineMake + field = "Manufacturer Engine Code", engineCode + field = "Vehicle Name", vehicleName + field = "Compression Ratio", compressionRatio + field = "Forced Induction?", isForcedInduction + + dialog = trigger_primary, "Primary Trigger" + topicHelp = "triggerHelp" + ; see also in firmware '[doesTriggerImplyOperationMode]' tag + field = "What kind of engine", twoStroke + field = "" + field = "Trigger type", trigger_type + field = "Total tooth count", trigger_customTotalToothCount, {trigger_type == 0}, {trigger_type == 0} + field = "Missing/skipped tooth count", trigger_customSkippedToothCount, {trigger_type == 0}, {trigger_type == 0} + field = "Skipped wheel location", skippedWheelOnCam, 1, { twoStroke == 0 && (trigger_type == 0 || trigger_type == 8 || trigger_type == 9 || trigger_type == 11 || trigger_type == 17 || trigger_type == 18 || trigger_type == 23 || trigger_type == 48 || trigger_type == 69 || trigger_type == 73) } + field = "" + field = "!Reminder that 4-stroke cycle is 720 degrees" + field = "!For well-known trigger types use '0' trigger angle offset" + field = "Trigger Angle Advance", globalTriggerAngleOffset + + field = "" + field = "" + + field = "#Cam is primary if you have cam sensor as part of trigger shape" + ; cam if + ; two-stroke, or + ; not crank trigger and ((vague trigger and cam choice) or not vague trigger) + field = "Cam Sensor (Primary channel)", triggerInputPins1, 1, {twoStroke == 1 || ( !(trigger_type == 2 || trigger_type == 5 || trigger_type == 10 || trigger_type == 12 || trigger_type == 20 || trigger_type == 21 || trigger_type == 26 || trigger_type == 27 || trigger_type == 33 || trigger_type == 38 || trigger_type == 39 || trigger_type == 44 || trigger_type == 45 || trigger_type == 46 || trigger_type == 53 || trigger_type == 55 || trigger_type == 57 || trigger_type == 58 || trigger_type == 61 || trigger_type == 62 || trigger_type == 68 || trigger_type == 70 || trigger_type == 71 || trigger_type == 72 || trigger_type == 74 || trigger_type == 75 || trigger_type == 76 || trigger_type == 77) && ( ( (trigger_type == 8 || trigger_type == 9 || trigger_type == 11 || trigger_type == 17 || trigger_type == 18 || trigger_type == 23 || trigger_type == 48 || trigger_type == 69 || trigger_type == 73) && skippedWheelOnCam) || !(trigger_type == 8 || trigger_type == 9 || trigger_type == 11 || trigger_type == 17 || trigger_type == 18 || trigger_type == 23 || trigger_type == 48 || trigger_type == 69 || trigger_type == 73) ) ) } + field = "Crank Sensor (Primary channel)", triggerInputPins1, 1, { !(twoStroke == 1 || ( !(trigger_type == 2 || trigger_type == 5 || trigger_type == 10 || trigger_type == 12 || trigger_type == 20 || trigger_type == 21 || trigger_type == 26 || trigger_type == 27 || trigger_type == 33 || trigger_type == 38 || trigger_type == 39 || trigger_type == 44 || trigger_type == 45 || trigger_type == 46 || trigger_type == 53 || trigger_type == 55 || trigger_type == 57 || trigger_type == 58 || trigger_type == 61 || trigger_type == 62 || trigger_type == 68 || trigger_type == 70 || trigger_type == 71 || trigger_type == 72 || trigger_type == 74 || trigger_type == 75 || trigger_type == 76 || trigger_type == 77) && ( ( (trigger_type == 8 || trigger_type == 9 || trigger_type == 11 || trigger_type == 17 || trigger_type == 18 || trigger_type == 23 || trigger_type == 48 || trigger_type == 69 || trigger_type == 73) && skippedWheelOnCam) || !(trigger_type == 8 || trigger_type == 9 || trigger_type == 11 || trigger_type == 17 || trigger_type == 18 || trigger_type == 23 || trigger_type == 48 || trigger_type == 69 || trigger_type == 73) ) )) } + field = "Invert Primary", invertPrimaryTriggerSignal + field = "Secondary channel", triggerInputPins2, { triggerInputPins2 != 0 || (triggerInputPins1 != 0 && (trigger_type == 1 || trigger_type == 3 || trigger_type == 15 || trigger_type == 16 || trigger_type == 19 || trigger_type == 25 || trigger_type == 28 || trigger_type == 31 || trigger_type == 35 || trigger_type == 36 || trigger_type == 37 || trigger_type == 40 || trigger_type == 49 || trigger_type == 50 || trigger_type == 53 || trigger_type == 54 || trigger_type == 63 || trigger_type == 64) ) } + field = "Invert Secondary", invertSecondaryTriggerSignal, {triggerInputPins2 != 0 && (trigger_type == 1 || trigger_type == 3 || trigger_type == 15 || trigger_type == 16 || trigger_type == 19 || trigger_type == 25 || trigger_type == 28 || trigger_type == 31 || trigger_type == 35 || trigger_type == 36 || trigger_type == 37 || trigger_type == 40 || trigger_type == 49 || trigger_type == 50 || trigger_type == 53 || trigger_type == 54 || trigger_type == 63 || trigger_type == 64) } + + dialog = trigger_cams, "Cam Inputs" + field = "!https://rusefi.com/s/vvt" + ; todo: code generator to hard-code all triggers not requiring VVT? + ; todo: https://github.com/rusefi/rusefi/issues/2077 + + field = "Cam mode (intake)", vvtMode1, {trigger_type != 3} + field = "2JZ Position", camDecoder2jzPosition, 1, {vvtMode1 == 2} + field = "2JZ Precision", camDecoder2jzPrecision, 1, {vvtMode1 == 2} + field = "Cam mode (exhaust)", vvtMode2, {trigger_type != 3} + field = "" + field = "Cam sensor bank 1 intake", camInputs1, { camInputs1 != 0 || (vvtMode1 != 0 ) } + field = "Cam sensor bank 1 exhaust", camInputs2, { camInputs2 != 0 || (vvtMode2 != 0 && camInputs1 != 0 ) } + field = "Cam sensor bank 2 intake", camInputs3, { camInputs3 != 0 || (vvtMode1 != 0 && camInputs1 != 0 ) } + field = "Cam sensor bank 2 exhaust", camInputs4, { camInputs4 != 0 || (vvtMode2 != 0 && camInputs2 != 0 ) } + field = "Invert cam inputs", invertCamVVTSignal, { camInputs1 != 0 } + field = "" + field = "#Set offset so VVT indicates 0 degrees in default position" + field = "VVT offset bank 1 intake", vvtOffsets1, { camInputs1 != 0 } + field = "VVT offset bank 1 exhaust", vvtOffsets2, { camInputs2 != 0 } + field = "VVT offset bank 2 intake", vvtOffsets3, { camInputs3 != 0 } + field = "VVT offset bank 2 exhaust", vvtOffsets4, { camInputs4 != 0 } + field = "" + field = "Cam for engine sync resolution", engineSyncCam, { vvtMode1 != 0 || vvtMode2 != 0 } + + dialog = triggerConfiguration_gap, "Trigger Gap Override" + field = "!This is a pretty advanced feature for when you are debugging trigger synchronization" + field = "Override well known trigger gaps", overrideTriggerGaps + field = gapTrackingLengthOverride, gapTrackingLengthOverride, { overrideTriggerGaps == 1 } + field = "First gap from", triggerGapOverrideFrom1, { overrideTriggerGaps == 1 } + field = "First gap to", triggerGapOverrideTo1, { overrideTriggerGaps == 1 } + field = "Second gap from", triggerGapOverrideFrom2, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 2 } + field = "Second gap to", triggerGapOverrideTo2, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 2 } + field = "Gap #3 from", triggerGapOverrideFrom3, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 3 } + field = "Gap #3 to", triggerGapOverrideTo3, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 3 } + field = "Gap #4 from", triggerGapOverrideFrom4, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 4 } + field = "Gap #4 to", triggerGapOverrideTo4, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 4 } + field = "Gap #5 from", triggerGapOverrideFrom5, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 5 } + field = "Gap #5 to", triggerGapOverrideTo5, { overrideTriggerGaps == 1 && gapTrackingLengthOverride >= 5 } + field = "Override well known VVT gaps", overrideVvtTriggerGaps + field = gapVvtTrackingLengthOverride, gapVvtTrackingLengthOverride, { overrideVvtTriggerGaps == 1 } + field = "First VVT gap from", triggerVVTGapOverrideFrom1 + field = "First VVT gap to", triggerVVTGapOverrideTo1 + field = "Second VVT gap from", triggerVVTGapOverrideFrom2 + field = "Second VVT gap to", triggerVVTGapOverrideTo2 + field = "VVT gap #3 from", triggerVVTGapOverrideFrom3 + field = "VVT gap #3 to", triggerVVTGapOverrideTo3 + field = "VVT gap #4 from", triggerVVTGapOverrideFrom4 + field = "VVT gap #4 to", triggerVVTGapOverrideTo4 + + dialog = trigger_advanced, "Advanced Trigger" + field = "Require cam/VVT sync for ignition", isPhaseSyncRequiredForIgnition + field = "Maximum cam/VVT sync RPM", maxCamPhaseResolveRpm + field = "MAP readout angle", mapCamDetectionAnglePosition, 1, { vvtMode1 == 13 } + field = "Print verbose VVT sync details to console",verboseVVTDecoding + field = "Print verbose trigger sync to console", verboseTriggerSynchDetails + field = "Display logic signals", displayLogicLevelsInEngineSniffer + field = "Do not print messages in case of sync error", silentTriggerError + field = "Focus on inputs in engine sniffer", engineSnifferFocusOnInputs + field = "Enable noise filtering", useNoiselessTriggerDecoder, {trigger_type == 8 || trigger_type == 9} + panel = triggerConfiguration_gap + + dialog = triggerConfiguration, "", xAxis + panel = trigger_primary, {1}, { consumeObdSensors == 0 } + panel = trigger_cams, {1}, { consumeObdSensors == 0 } + +; Engine->Injection Settings + dialog = injChars, "Injector Settings", yAxis + field = "Injector flow", injector_flow, {isInjectionEnabled == 1} + field = "Injector flow units", injectorFlowAsMassFlow, {isInjectionEnabled == 1} + field = "Fuel rail pressure sensor", injectorPressureType, { isInjectionEnabled && (highPressureFuel_hwChannel || lowPressureFuel_hwChannel) } + field = "Injector flow compensation mode", injectorCompensationMode, { isInjectionEnabled } + field = "Injector reference pressure", fuelReferencePressure, { isInjectionEnabled && injectorCompensationMode != 0 } + + dialog = fuelParams, "Fuel characteristics", yAxis + field = "Stoichiometric ratio", stoichRatioPrimary, {isInjectionEnabled == 1} + field = "E100 stoichiometric ratio", stoichRatioSecondary, {isInjectionEnabled == 1 && flexSensorPin != 0 } + + dialog = injectorOutputSettings, "Injector Outputs", yAxis + field = "Use only first half of outputs for batch mode" + field = "# wire each output to the corresponding cylinder number" + field = "# rusEFI handles firing order" + field = "Injection Output 1", injectionPins1, {isInjectionEnabled == 1} + field = "Injection Output 2", injectionPins2, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 1} + field = "Injection Output 3", injectionPins3, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 2} + field = "Injection Output 4", injectionPins4, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 3} + field = "Injection Output 5 ", injectionPins5, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 4} + field = "Injection Output 6 ", injectionPins6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} + field = "Injection Output 7 ", injectionPins7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} + field = "Injection Output 8 ", injectionPins8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} + field = "Injection Output 9 ", injectionPins9, {isInjectionEnabled == 1 && cylindersCount > 8} + field = "Injection Output 10 ", injectionPins10, {isInjectionEnabled == 1 && cylindersCount > 9} + field = "Injection Output 11 ", injectionPins11, {isInjectionEnabled == 1 && cylindersCount > 10} + field = "Injection Output 12 ", injectionPins12, {isInjectionEnabled == 1 && cylindersCount > 11} + + dialog = cylinderBankSelect, "Cylinder Banks", yAxis + field = "Cylinder 1", cylinderBankSelect1, {isInjectionEnabled == 1} + field = "Cylinder 2", cylinderBankSelect2, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 1} + field = "Cylinder 3", cylinderBankSelect3, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 2} + field = "Cylinder 4", cylinderBankSelect4, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 3} + field = "Cylinder 5 ", cylinderBankSelect5, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 4} + field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} + field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} + field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} + field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} + field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} + field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} + field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} + + dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis + field = "Add nonlinearity below pulse", applyNonlinearBelowPulse + field = "constant", injectorCorrectionPolynomial1 + field = "x^1", injectorCorrectionPolynomial2 + field = "x^2", injectorCorrectionPolynomial3 + field = "x^3", injectorCorrectionPolynomial4 + field = "x^4", injectorCorrectionPolynomial5 + field = "x^5", injectorCorrectionPolynomial6 + field = "x^6", injectorCorrectionPolynomial7 + field = "x^7", injectorCorrectionPolynomial8 + + dialog = injectorNonlinearFord, "Ford-model Small Pulse Correction", yAxis + field = "Small pulse slope (ALOSL)", fordInjectorSmallPulseSlope + field = "Set this to 'mass flow'", injectorFlowAsMassFlow + field = "Large pulse slope (AHISL)", injector_flow + field = "Small pulse breakpoint (FUEL_BKPT)", fordInjectorSmallPulseBreakPoint + + dialog = injectorNonlinear + field = "Small pulse correction mode", injectorNonlinearMode + panel = injectorNonlinearPolynomial, {1}, { injectorNonlinearMode == 1 } + panel = injectorNonlinearFord, {1}, { injectorNonlinearMode == 2 } + + dialog = testLuaOut, "Lua Out Test" + commandButton = "Lua Out #1", cmd_test_lua1 + commandButton = "Lua Out #2", cmd_test_lua2 + commandButton = "Lua Out #3", cmd_test_lua3 + commandButton = "Lua Out #4", cmd_test_lua4 + commandButton = "Lua Out #5", cmd_test_lua5 + commandButton = "Lua Out #6", cmd_test_lua6 + commandButton = "Lua Out #7", cmd_test_lua7 + commandButton = "Lua Out #8", cmd_test_lua8 + commandButton = "Abort test", cmd_test_cancel + + dialog = testInjectors, "Injector Test" + commandButton = "Injector #1", cmd_test_inj1 + commandButton = "Injector #2", cmd_test_inj2, { cylindersCount >= 2 } + commandButton = "Injector #3", cmd_test_inj3, { cylindersCount >= 3 } + commandButton = "Injector #4", cmd_test_inj4, { cylindersCount >= 4 } + commandButton = "Injector #5", cmd_test_inj5, { cylindersCount >= 5 } + commandButton = "Injector #6", cmd_test_inj6, { cylindersCount >= 6 } + commandButton = "Injector #7", cmd_test_inj7, { cylindersCount >= 7 } + commandButton = "Injector #8", cmd_test_inj8, { cylindersCount >= 8 } + commandButton = "Injector #9", cmd_test_inj9, { cylindersCount >= 9 } + commandButton = "Injector #10", cmd_test_inj10, { cylindersCount >= 10 } + commandButton = "Injector #11", cmd_test_inj11, { cylindersCount >= 11 } + commandButton = "Injector #12", cmd_test_inj12, { cylindersCount >= 12 } + commandButton = "Abort test", cmd_test_cancel + + dialog = testSolenoids, "TCU Solenoid Test" + commandButton = "Solenoid #1", cmd_test_sol1 + commandButton = "Solenoid #2", cmd_test_sol2 + commandButton = "Solenoid #3", cmd_test_sol3 + commandButton = "Solenoid #4", cmd_test_sol4 + commandButton = "Solenoid #5", cmd_test_sol5 + commandButton = "Solenoid #6", cmd_test_sol6 + commandButton = "Abort test", cmd_test_cancel + + dialog = testOther + field = "Count", benchTestCount + field = "On Time", benchTestOnTime + field = "Off Time", benchTestOffTime + panel = testSolenoids + + dialog = injectionSettingsEast, "", yAxis + panel = testInjectors + field = "" + + dialog = injectionSettingsWest, "", yAxis + panel = injectorOutputSettings + field = "" + + dialog = injectionSettings, "", xAxis + panel = injectionSettingsWest + panel = injectionSettingsEast + + dialog = injectorConfig, "", yAxis + topicHelp = "fuelHelp" + panel = baseInjection + panel = injChars + panel = fuelParams + panel = injectorsDeadTime + + dialog = ignitionCylExtra, "Cylinder offsets" + field = "Offset angle for each cylinder if you have an odd fire" + field = "engine, like a v-twin or some V6/V10 engines" + field = "#Positive numbers retard, negative numbers advance" + field = "Offset cyl 1", timing_offset_cylinder1 + field = "Offset cyl 2", timing_offset_cylinder2, {cylindersCount > 1} + field = "Offset cyl 3", timing_offset_cylinder3, {cylindersCount > 2} + field = "Offset cyl 4", timing_offset_cylinder4, {cylindersCount > 3} + field = "Offset cyl 5", timing_offset_cylinder5, {cylindersCount > 4} + field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} + field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} + field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} + field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} + field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} + field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} + field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} + + dialog = multisparkDwellParams, "Delay & Dwell" + field = "Spark duration", multisparkSparkDuration, {multisparkEnable} + field = "Subsequent spark dwell", multisparkDwell, {multisparkEnable} + + dialog = multisparkMain, "Configuration" + field = "Maximum engine speed", multisparkMaxRpm, {multisparkEnable} + field = "Fire sparks for this angle duration" multisparkMaxSparkingAngle, {multisparkEnable} + field = "Maximum extra spark count" multisparkMaxExtraSparkCount, {multisparkEnable} + + dialog = multisparkSettings, "Multispark" + field = "#WARNING! These settings have the potential to overheat ignition components" + field = "#and cause other nasty misbehavior. Use with care, at your own risk!" + field = "#Not recommended for use on distributor or wasted spark ignition systems." + field = "Enable multiple sparks", multisparkEnable + panel = multisparkMain + panel = multisparkDwellParams + + dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", ignBlends1_blendParameter + panel = ignAdder1Bias + + dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", ignBlends2_blendParameter + panel = ignAdder2Bias + + dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", ignBlends3_blendParameter + panel = ignAdder3Bias + + dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", ignBlends4_blendParameter + panel = ignAdder4Bias + + dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0% added to the VE. Note that this doesn't add 5% VE," + field = "instead, it adds 5% to the current VE value, multiplying VE by 1.05." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", veBlends1_blendParameter + panel = veBlend2Bias + + dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0% added to the VE. Note that this doesn't add 5% VE," + field = "instead, it adds 5% to the current VE value, multiplying VE by 1.05." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", veBlends2_blendParameter + panel = veBlend2Bias + + dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0% added to the VE. Note that this doesn't add 5% VE," + field = "instead, it adds 5% to the current VE value, multiplying VE by 1.05." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", veBlends3_blendParameter + panel = veBlend3Bias + + dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0% added to the VE. Note that this doesn't add 5% VE," + field = "instead, it adds 5% to the current VE value, multiplying VE by 1.05." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", veBlends4_blendParameter + panel = veBlend4Bias + + dialog = boostOpenBlend1Cfg, "Boost open loop blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the open loop boost table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the boost open loop %." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", boostOpenLoopBlends1_blendParameter + panel = boostOpenLoopBlend1Bias + + dialog = boostOpenBlend2Cfg, "Boost open loop blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the open loop boost table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the boost open loop %." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", boostOpenLoopBlends2_blendParameter + panel = boostOpenLoopBlend2Bias + + dialog = boostClosedBlend1Cfg, "Boost closed loop blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the closed loop boost table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the boost closed loop %." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", boostClosedLoopBlends1_blendParameter + panel = boostClosedLoopBlend1Bias + + dialog = boostClosedBlend2Cfg, "Boost closed loop blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the closed loop boost table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the boost closed loop %." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." + field = "Blend parameter", boostClosedLoopBlends2_blendParameter + panel = boostClosedLoopBlend2Bias + + dialog = dwellSettings, "", yAxis + panel = dwellCorrection + panel = dwellVoltageCorrection + + dialog = auxTempSensor1Sensor, "aux1 Thermistor Settings" + field = "Input channel", auxTempSensor1_adcChannel + field = "Pullup resistor", auxTempSensor1_bias_resistor, {auxTempSensor1_adcChannel != 0} + + field = "#Here is three pairs of thermistor temperature and resistance." + field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C" + field = "" + field = "Lowest temperature", auxTempSensor1_tempC_1, {auxTempSensor1_adcChannel != 0} + field = "Resistance @ LT", auxTempSensor1_resistance_1, {auxTempSensor1_adcChannel != 0} + field = "" + field = "Middle temperature", auxTempSensor1_tempC_2, {auxTempSensor1_adcChannel != 0} + field = "Resistance @ MT", auxTempSensor1_resistance_2, {auxTempSensor1_adcChannel != 0} + field = "" + field = "Highest temperature", auxTempSensor1_tempC_3, {auxTempSensor1_adcChannel != 0} + field = "Resistance @ HT", auxTempSensor1_resistance_3, {auxTempSensor1_adcChannel != 0} + + dialog = auxTempSensor2Sensor, "aux2 Thermistor Settings" + field = "Input channel", auxTempSensor2_adcChannel + field = "Pullup resistor", auxTempSensor2_bias_resistor, {auxTempSensor2_adcChannel != 0} + + field = "#Here is three pairs of thermistor temperature and resistance." + field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C" + field = "" + field = "Lowest temperature", auxTempSensor2_tempC_1, {auxTempSensor2_adcChannel != 0} + field = "Resistance @ LT", auxTempSensor2_resistance_1, {auxTempSensor2_adcChannel != 0} + field = "" + field = "Middle temperature", auxTempSensor2_tempC_2, {auxTempSensor2_adcChannel != 0} + field = "Resistance @ MT", auxTempSensor2_resistance_2, {auxTempSensor2_adcChannel != 0} + field = "" + field = "Highest temperature", auxTempSensor2_tempC_3, {auxTempSensor2_adcChannel != 0} + field = "Resistance @ HT", auxTempSensor2_resistance_3, {auxTempSensor2_adcChannel != 0} + + dialog = tpsSent1, "SENT TPS" + field = "Input #1", sentInputPins1 + field = "ETB type", sentEtbType, {sentInputPins1 != 0} + field = "Closed value", customSentTpsMin, {sentEtbType == 3 } + field = "Open value", customSentTpsMax, {sentEtbType == 3 } + + dialog = oilTempSensor, "Oil Temp Sensor Settings" + field = "Input channel", oilTempSensor_adcChannel + field = "Pullup resistor", oilTempSensor_bias_resistor, {oilTempSensor_adcChannel != 0} + + field = "Lowest temperature", oilTempSensor_tempC_1, {oilTempSensor_adcChannel != 0} + field = "Resistance @ LT", oilTempSensor_resistance_1, {oilTempSensor_adcChannel != 0} + field = "" + field = "Middle temperature", oilTempSensor_tempC_2, {oilTempSensor_adcChannel != 0} + field = "Resistance @ MT", oilTempSensor_resistance_2, {oilTempSensor_adcChannel != 0} + field = "" + field = "Highest temperature", oilTempSensor_tempC_3, {oilTempSensor_adcChannel != 0} + field = "Resistance @ HT", oilTempSensor_resistance_3, {oilTempSensor_adcChannel != 0} + + dialog = fuelTempSensor, "Fuel Temp Sensor Settings" + field = "Input channel", fuelTempSensor_adcChannel + field = "Pullup resistor", fuelTempSensor_bias_resistor, {fuelTempSensor_adcChannel != 0} + + field = "Lowest temperature", fuelTempSensor_tempC_1, {fuelTempSensor_adcChannel != 0} + field = "Resistance @ LT", fuelTempSensor_resistance_1, {fuelTempSensor_adcChannel != 0} + field = "" + field = "Middle temperature", fuelTempSensor_tempC_2, {fuelTempSensor_adcChannel != 0} + field = "Resistance @ MT", fuelTempSensor_resistance_2, {fuelTempSensor_adcChannel != 0} + field = "" + field = "Highest temperature", fuelTempSensor_tempC_3, {fuelTempSensor_adcChannel != 0} + field = "Resistance @ HT", fuelTempSensor_resistance_3, {fuelTempSensor_adcChannel != 0} + + dialog = ambientTempSensor, "Ambient Temp Sensor Settings" + field = "!Put this sensor before any turbocharger/supercharger" + field = "!near the air filter." + field = "Input channel", ambientTempSensor_adcChannel + field = "Pullup resistor", ambientTempSensor_bias_resistor, {ambientTempSensor_adcChannel != 0} + + field = "Lowest temperature", ambientTempSensor_tempC_1, {ambientTempSensor_adcChannel != 0} + field = "Resistance @ LT", ambientTempSensor_resistance_1, {ambientTempSensor_adcChannel != 0} + field = "" + field = "Middle temperature", ambientTempSensor_tempC_2, {ambientTempSensor_adcChannel != 0} + field = "Resistance @ MT", ambientTempSensor_resistance_2, {ambientTempSensor_adcChannel != 0} + field = "" + field = "Highest temperature", ambientTempSensor_tempC_3, {ambientTempSensor_adcChannel != 0} + field = "Resistance @ HT", ambientTempSensor_resistance_3, {ambientTempSensor_adcChannel != 0} + + dialog = compressorDischargeTemperature, "Compressor Discharge Temp Settings" + field = "!Put this sensor after the turbocharger/supercharger" + field = "!but before the intercooler." + field = "Input channel", compressorDischargeTemperature_adcChannel + field = "Pullup resistor", compressorDischargeTemperature_bias_resistor, {compressorDischargeTemperature_adcChannel != 0} + + field = "Lowest temperature", compressorDischargeTemperature_tempC_1, {compressorDischargeTemperature_adcChannel != 0} + field = "Resistance @ LT", compressorDischargeTemperature_resistance_1, {compressorDischargeTemperature_adcChannel != 0} + field = "" + field = "Middle temperature", compressorDischargeTemperature_tempC_2, {compressorDischargeTemperature_adcChannel != 0} + field = "Resistance @ MT", compressorDischargeTemperature_resistance_2, {compressorDischargeTemperature_adcChannel != 0} + field = "" + field = "Highest temperature", compressorDischargeTemperature_tempC_3, {compressorDischargeTemperature_adcChannel != 0} + field = "Resistance @ HT", compressorDischargeTemperature_resistance_3, {compressorDischargeTemperature_adcChannel != 0} + + dialog = tpsNum1, "Throttle Body #1" + field = "Primary sensor", tps1_1AdcChannel + field = "Primary min", tpsMin, {tps1_1AdcChannel != 0} + field = "Primary max", tpsMax, {tps1_1AdcChannel != 0} + field = "Secondary sensor", tps1_2AdcChannel, {tps1_1AdcChannel != 0} + field = "Secondary min", tps1SecondaryMin, {tps1_2AdcChannel != 0 && tps1_1AdcChannel != 0} + field = "Secondary max", tps1SecondaryMax, {tps1_2AdcChannel != 0 && tps1_1AdcChannel != 0} + commandButton = "Auto Calibrate ETB 1", cmd_etb_auto_calibrate, {etb1configured == 1 && tps1_1AdcChannel != 0 && calibrationMode == 0} + + dialog = tpsNum2, "Throttle Body #2" + field = "Primary sensor", tps2_1AdcChannel + field = "Primary min", tps2Min, {tps2_1AdcChannel != 0} + field = "Primary max", tps2Max, {tps2_1AdcChannel != 0} + field = "Secondary sensor", tps2_2AdcChannel, {tps2_1AdcChannel != 0} + field = "Secondary min", tps2SecondaryMin, {tps2_2AdcChannel != 0 && tps2_1AdcChannel != 0} + field = "Secondary max", tps2SecondaryMax, {tps2_2AdcChannel != 0 && tps2_1AdcChannel != 0} + commandButton = "Auto Calibrate ETB 2", cmd_etb_auto_calibrate_2, {etb2configured == 1 && tps2_1AdcChannel != 0 && calibrationMode == 0} + + dialog = tpsLimits, "TPS Limits" + field = "TPS minimum valid value", tpsErrorDetectionTooLow, {tps1_1AdcChannel != 0} + field = "TPS maximum valid value", tpsErrorDetectionTooHigh, {tps1_1AdcChannel != 0} + + dialog = tpsSensorLeft + panel = tpsLimits + panel = tpsNum1 + panel = tpsNum2 + + dialog = pedalSensorLeft, "Accelerator pedal" + field = "Accelerator position sensor", throttlePedalPositionAdcChannel + field = "Up voltage", throttlePedalUpVoltage + commandButton = "Grab Up", cmd_calibrate_pedal_up + field = "Down (WOT) voltage", throttlePedalWOTVoltage + commandButton = "Grab Down", cmd_calibrate_pedal_down + field = "Accelerator position 2nd sensor", throttlePedalPositionSecondAdcChannel + field = "Up voltage", throttlePedalSecondaryUpVoltage + field = "Down (WOT) voltage", throttlePedalSecondaryWOTVoltage + field = "Error Detection Threshold", etbSplit + + dialog = pedalGauges + gauge = pedalPositionGauge + gauge = rawPpsPrimaryGauge + gauge = rawPpsSecondaryGauge + + dialog = tpsGauges + gauge = rawTps1PrimaryGauge + gauge = rawTps1SecondaryGauge + gauge = rawTps2PrimaryGauge + gauge = rawTps2SecondaryGauge + + dialog = pedalSensor, "Accelerator pedal", border + panel = pedalSensorLeft, West + panel = pedalGauges, East + + dialog = tpsSensor, "", border + panel = tpsSensorLeft, West + panel = tpsGauges, East + + dialog = wastegatePosConfig, "Wastegate position sensor" + field = "Input", wastegatePositionSensor + field = "Min (fully closed, most boost)", wastegatePositionMin + field = "Max (fully open, least boost)", wastegatePositionMax + + dialog = idlePosConfig, "Idle position sensor" + field = "Input", idlePositionChannel + field = "Min (valve closed, low idle)", idlePositionMin + field = "Max (valve open, high idle)", idlePositionMax + + dialog = wastegateIdlePosLeft, "" + panel = wastegatePosConfig + panel = idlePosConfig + + dialog = wastegateIdlePosGauges, "" + gauge = rawWastegatePositionGauge, West + gauge = wastegatePosGauge, East + gauge = rawIdlePositionSensorGauge + gauge = idlePosSensGauge + + dialog = wastegateIdlePos, "", border + panel = wastegateIdlePosLeft, West + panel = wastegateIdlePosGauges, East + + dialog = mc33Dialog, "Low-Z injector control PT2001" + field = "SPI Chip Select", mc33816_cs + field = "SPI Device", mc33816spiDevice + field = "MC33816 rstb", mc33816_rstb + field = "MC33816 flag0", mc33816_flag0 + + field = "Boost voltage", mc33_hvolt + field = "Boost current target", mc33_i_boost + field = "Min boost time", mc33_t_min_boost + field = "Max boost time (timeout)", mc33_t_max_boost + + field = "Peak phase current target", mc33_i_peak + field = "Peak phase duration", mc33_t_peak_tot + field = "Peak phase loop off time", mc33_t_peak_off + field = "Peak -> Hold Bypass Time", mc33_t_bypass + + field = "Hold current target", mc33_i_hold + field = "Hold phase loop off time", mc33_t_hold_off + field = "Maximum injection duration", mc33_t_hold_tot + +; Sensor Inputs + dialog = otherSensorInputs, "Other Sensor Inputs" + field = "Clutch Down", clutchDownPin + field = "Clutch Down inverted", clutchDownPinInverted + field = "Clutch Down mode", clutchDownPinMode + + field = "Clutch Up", clutchUpPin + field = "Clutch Up inverted", clutchUpPinInverted + field = "Clutch Up mode", clutchUpPinMode + field = "Throttle Up switch", throttlePedalUpPin + field = "Brake pedal switch", brakePedalPin + field = "Flex fuel sensor", flexSensorPin + field = "Turbo Speed Sensor", turboSpeedSensorInputPin + field = "Turbo Speed Multiplier", turboSpeedSensorMultiplier + field = "Throttle inlet pressure sensor", throttleInletPressureChannel + field = "Compressor discharge pressure sensor", compressorDischargePressureChannel + + dialog = fuelLevelDialog, "Fuel Level Sensor" + field = "Input channel", fuelLevelSensor + panel = fuelLevelCurve + +; +; allXXX sections allows a quick overview of used I/O in order to address conflicts mostly, not really to +; configure the features. +; + dialog = allPinsSensors, "Sensors" + field = "Throttle pedal Position Channel", throttlePedalPositionAdcChannel + field = "Throttle pedal Position #2", throttlePedalPositionSecondAdcChannel + field = "Primary input channel", triggerInputPins1 + field = "Secondary channel", triggerInputPins2 + field = "Cam Sync/VVT input", camInputs1 + field = "CLT ADC input", clt_adcChannel + field = "IAT ADC input", iat_adcChannel + field = "vBatt ADC input", vbattAdcChannel + field = "TPS1 ADC input", tps1_1AdcChannel + field = "TPS2 ADC input", tps2_1AdcChannel + field = "MAF ADC input", mafAdcChannel + field = "MAF 2 ADC input", maf2AdcChannel + field = "AFR ADC input", afr_hwChannel + field = "AFR 2 ADC input", afr_hwChannel2 + field = "Baro ADC input", baroSensor_hwChannel + field = "MAP ADC input", map_sensor_hwChannel + field = "Fuel Level input", fuelLevelSensor + field = "Vehicle Speed input", vehicleSpeedSensorInputPin + field = "Clutch Down input", clutchDownPin + field = "Clutch Up input", clutchUpPin + field = "Brake pedal input", brakePedalPin + field = "A/C Switch", acSwitch + field = "Aux Temperature #1", auxTempSensor1_adcChannel + field = "Aux Temperature #2", auxTempSensor2_adcChannel + field = "Aux Fast Analog", auxFastSensor1_adcChannel + + dialog = allTriggerDebug, "Trigger Debug" + field = "trigger 1 debug", triggerInputDebugPins1 + field = "trigger 2 debug", triggerInputDebugPins2 + field = "cam 1 debug", camInputsDebug1 + field = "cam 2 debug", camInputsDebug2 + field = "cam 3 debug", camInputsDebug3 + field = "cam 4 debug", camInputsDebug4 + + dialog = allPinsMC33, "MC33816" + field = "Chip Select", mc33816_cs + field = rstb, mc33816_rstb + field = flag0, mc33816_flag0 + field = mc33816_driven, mc33816_driven + field = mc33816spiDevice, mc33816spiDevice + field = hpfpValvePin, hpfpValvePin + + dialog = allPins1_1 + field = "trigger stimulator output #1", triggerSimulatorPins1 + field = "trigger stimulator output #2", triggerSimulatorPins2 + field = "tle6240_cs", tle6240_cs + field = "mc33810_cs", mc33810_cs1 + field = "mc33810_csPinMode", mc33810_csPinMode + field = "tle6240 SPI", tle6240spiDevice + + dialog = allPins1_2 + field = "Tachometer output", tachOutputPin + field = "Narrowband O2 heater output", o2heaterPin + field = "Idle Solenoid Primary output", idle_solenoidPin + field = "Idle Solenoid Secondary output",secondSolenoidPin + field = "Idle Stepper Dir", idle_stepperDirectionPin + field = "Idle Stepper Step", idle_stepperStepPin + field = "Idle Stepper Enable", stepperEnablePin + field = "Fuel Pump output", fuelPumpPin + field = "SD CS Pin", sdCardCsPin + field = "MIL/Check Engine output", malfunctionIndicatorPin + field = "test557pin", test557pin + field = "Fan Pin", fanPin + field = "A/C Relay", acRelayPin + field = "Main Relay Pin", mainRelayPin + field = "Starter Relay Pin", starterRelayDisablePin + + dialog = allPins2_1 + field = "Injection Output 1", injectionPins1 + field = "Injection Output 2", injectionPins2 + field = "Injection Output 3", injectionPins3 + field = "Injection Output 4", injectionPins4 + field = "Injection Output 5 ", injectionPins5 + field = "Injection Output 6 ", injectionPins6 + field = "Injection Output 7 ", injectionPins7 + field = "Injection Output 8 ", injectionPins8 + field = "Injection Output 9 ", injectionPins9 + field = "Injection Output 10 ", injectionPins10 + field = "Injection Output 11 ", injectionPins11 + field = "Injection Output 12 ", injectionPins12 + field = auxSpeedSensorInputPin1, auxSpeedSensorInputPin1 + field = auxSpeedSensorInputPin2, auxSpeedSensorInputPin2 + + + dialog = allPins2_2 + field = "Ignition Output 1", ignitionPins1 + field = "Ignition Output 2", ignitionPins2 + field = "Ignition Output 3", ignitionPins3 + field = "Ignition Output 4", ignitionPins4 + field = "Ignition Output 5", ignitionPins5 + field = "Ignition Output 6", ignitionPins6 + field = "Ignition Output 7", ignitionPins7 + field = "Ignition Output 8", ignitionPins8 + field = "Ignition Output 9", ignitionPins9 + field = "Ignition Output 10", ignitionPins10 + field = "Ignition Output 11", ignitionPins11 + field = "Ignition Output 12", ignitionPins12 + + dialog = allPins2_3 + field = "Debug Trigger Sync", debugTriggerSync + panel = allTriggerDebug + panel = allPinsMC33 + + dialog = allPins1_3 + field = "Aux ADC #1", auxAnalogInputs1 + field = "Aux ADC #2", auxAnalogInputs2 + field = "Aux ADC #3", auxAnalogInputs3 + field = "Aux ADC #4", auxAnalogInputs4 + field = "Aux ADC #5", auxAnalogInputs5 + field = "Aux ADC #6", auxAnalogInputs6 + field = "Aux ADC #7", auxAnalogInputs7 + field = "Aux ADC #8", auxAnalogInputs8 + field = "CAN RX pin", canRxPin + field = "CAN TX pin", canTxPin + field = "SPI1 MOSI", spi1mosiPin, { spi1mosiPin != 0 || is_enabled_spi_1 == 1} + field = "SPI1 MISO", spi1misoPin, { spi1misoPin != 0 || is_enabled_spi_1 == 1} + field = "SPI1 SCK", spi1sckPin, {is_enabled_spi_1 == 1} + field = "SPI2 MOSI", spi2mosiPin, {is_enabled_spi_2 == 1} + field = "SPI2 MISO", spi2misoPin, {is_enabled_spi_2 == 1} + field = "SPI2 SCK", spi2sckPin, {is_enabled_spi_2 == 1} + field = "SPI3 MOSI", spi3mosiPin, {is_enabled_spi_3 == 1} + field = "SPI3 MISO", spi3misoPin, {is_enabled_spi_3 == 1} + field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1} + field = "hip9011CsPin", hip9011CsPin + field = "LIS302DLCsPin", LIS302DLCsPin + field = "Saab CDM knock", cdmInputPin + field = "DRV8860 CS", drv8860_cs + field = "DRV8860 CS Mode", drv8860_csPinMode + field = "DRV8860 MISO pin", drv8860_miso + field = "DRV8860 SPI", drv8860spiDevice + + dialog = allPins3_1 + panel = allPinsSensors + + dialog = allPins3_2 + field = "VVT solenoid bank 1 intake", vvtPins1 + field = "VVT solenoid bank 1 exhaust", vvtPins2 + field = "VVT solenoid bank 2 intake", vvtPins3 + field = "VVT solenoid bank 2 exhaust", vvtPins4 + field = "Aux Valve #1", auxValves1 + field = "Aux Valve #2", auxValves2 + field = "TLE8888 Chip Select", tle8888_cs + field = "TLE 8888 spi", tle8888spiDevice + field = "L9779 Chip Select", l9779_cs + field = "AUX Serial TX", auxSerialTxPin + field = "AUX Serial RX", auxSerialRxPin + field = "Start/Stop Button", startStopButtonPin + field = "Upshift Pin", tcuUpshiftButtonPin + field = "Downshift Pin", tcuDownshiftButtonPin + + dialog = allPins3_1_and_2, "All IO 3/3", xAxis + panel = allPins3_1 + panel = allPins3_2 + + dialog = allPins1_1_and_2, "", xAxis + panel = allPins1_1 + panel = allPins1_2 + + dialog = allPins1, "All IO 1/3", xAxis + panel = allPins1_1_and_2 + panel = allPins1_3 + + dialog = allPins2_1_and_2, "", xAxis + panel = allPins2_1 + panel = allPins2_2 + + dialog = allPins2, "All IO 2/3", xAxis + panel = allPins2_1_and_2 + panel = allPins2_3 + + dialog = clt_thermistor, "CLT sensor" + field = "Input channel", clt_adcChannel + field = "Pullup resistor", clt_bias_resistor, {clt_adcChannel != 0} + + settingSelector = "Common CLT Sensors" + settingOption = "GM CLT", clt_tempC_1=-40,clt_resistance_1=100000,clt_tempC_2=40,clt_resistance_2=1459,clt_tempC_3=130,clt_resistance_3=70,useLinearCltSensor=0 + settingOption = "Miata NA", clt_tempC_1=-20,clt_resistance_1=16150,clt_tempC_2=40,clt_resistance_2=1150,clt_tempC_3=80,clt_resistance_3=330,useLinearCltSensor=0 + settingOption = "Miata NB", clt_tempC_1=-10,clt_resistance_1=9000,clt_tempC_2=20,clt_resistance_2=2500,clt_tempC_3=80,clt_resistance_3=320,useLinearCltSensor=0 + settingOption = "Bosch Various", clt_tempC_1=0,clt_resistance_1=5896,clt_tempC_2=50,clt_resistance_2=834,clt_tempC_3=100,clt_resistance_3=187,useLinearCltSensor=0 + + field = "#Input three pairs of thermistor temperature and resistance." + field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C" + field = "" + field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 0} + field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 0} + field = "" + field = "Middle temperature", clt_tempC_2, {clt_adcChannel != 0} + field = "Resistance @ MT", clt_resistance_2, {clt_adcChannel != 0} + field = "" + field = "Highest temperature", clt_tempC_3, {clt_adcChannel != 0} + field = "Resistance @ HT", clt_resistance_3, {clt_adcChannel != 0} + field = "" + field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 0} + + dialog = cltGauges + gauge = CLTGauge + gauge = rawCltGauge + + dialog = cltSensor, "CLT Sensor", border + panel = clt_thermistor, West + panel = cltGauges, East + + dialog = iat_thermistor, "IAT sensor" + field = "Input channel", iat_adcChannel + field = "Pullup resistor", iat_bias_resistor, {iat_adcChannel != 0} + + settingSelector = "Common IAT Sensors", {iat_adcChannel != 0} + settingOption = "GM IAT", iat_tempC_1=8.9,iat_resistance_1=7000,iat_tempC_2=30.6,iat_resistance_2=1930,iat_tempC_3=63.3,iat_resistance_3=560,useLinearIatSensor=0 + settingOption = "Miata NA/NB", iat_tempC_1=-20,iat_resistance_1=16150,iat_tempC_2=40,iat_resistance_2=1150,iat_tempC_3=80,iat_resistance_3=330,useLinearIatSensor=0 + settingOption = "Miata MSM IAT2", iat_tempC_1=0,iat_resistance_1=112000,iat_tempC_2=40,iat_resistance_2=17000,iat_tempC_3=60,iat_resistance_3=8000,useLinearIatSensor=0 + settingOption = "Bosch Various", iat_tempC_1=-10,iat_resistance_1=9397,iat_tempC_2=30,iat_resistance_2=1707,iat_tempC_3=70,iat_resistance_3=436,useLinearIatSensor=0 + + field = "#Input three pairs of thermistor temperature and resistance." + field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C" + field = "" + field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 0} + field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 0} + field = "" + field = "Middle temperature", iat_tempC_2, {iat_adcChannel != 0} + field = "Resistance @ MT", iat_resistance_2, {iat_adcChannel != 0} + field = "" + field = "Highest temperature", iat_tempC_3, {iat_adcChannel != 0} + field = "Resistance @ HT", iat_resistance_3, {iat_adcChannel != 0} + field = "" + field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 0} + + dialog = iatGauges + gauge = IATGauge + gauge = rawIatGauge + + dialog = iatSensor, "IAT Sensor", border + panel = iat_thermistor, West + panel = iatGauges, East + + dialog = oilp_settings, "Oil Pressure Sensor" + field = "Oil Pressure input", oilPressure_hwChannel + field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 0} + field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 0} + field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 0} + field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 0} + + dialog = oilPressureGauges + gauge = OilPressGauge + gauge = rawOilPressureGauge + + dialog = oilPressureSensor, "", border + panel = oilp_settings, West + panel = oilPressureGauges, East + + dialog = fuelp_settings, "Fuel Pressure Sensor" + field = "Fuel low pressure input", lowPressureFuel_hwChannel + field = "low voltage", lowPressureFuel_v1, {lowPressureFuel_hwChannel != 0} + field = "low pressure", lowPressureFuel_value1, {lowPressureFuel_hwChannel != 0} + field = "high voltage", lowPressureFuel_v2, {lowPressureFuel_hwChannel != 0} + field = "high pressure", lowPressureFuel_value2, {lowPressureFuel_hwChannel != 0} + field = "sensor type", fuelPressureSensorMode, {lowPressureFuel_hwChannel != 0} + + field = "Fuel high pressure input", highPressureFuel_hwChannel + field = "low voltage", highPressureFuel_v1, {highPressureFuel_hwChannel != 0} + field = "low pressure", highPressureFuel_value1, {highPressureFuel_hwChannel != 0} + field = "high voltage", highPressureFuel_v2, {highPressureFuel_hwChannel != 0} + field = "high pressure", highPressureFuel_value2, {highPressureFuel_hwChannel != 0} + + dialog = fuelPressureGauges + gauge = lowFuelPressureGauge + gauge = rawLowFuelPressureGauge + gauge = highFuelPressureGauge + gauge = rawHighFuelPressureGauge + + dialog = fuelPressureSensor, "", border + panel = fuelp_settings, West + panel = fuelPressureGauges, East + + dialog = auxLinearSensor1, "Aux Linear Sensor #1" + field = "Input", auxLinear1_hwChannel + field = "Low voltage", auxLinear1_v1, {auxLinear1_hwChannel != 0} + field = "Low value", auxLinear1_value1, {auxLinear1_hwChannel != 0} + field = "High voltage", auxLinear1_v2, {auxLinear1_hwChannel != 0} + field = "High value", auxLinear1_value2, {auxLinear1_hwChannel != 0} + + dialog = auxLinearSensor2, "Aux Linear Sensor #2" + field = "Input", auxLinear2_hwChannel + field = "Low voltage", auxLinear2_v1, {auxLinear2_hwChannel != 0} + field = "Low value", auxLinear2_value1, {auxLinear2_hwChannel != 0} + field = "High voltage", auxLinear2_v2, {auxLinear2_hwChannel != 0} + field = "High value", auxLinear2_value2, {auxLinear2_hwChannel != 0} + + dialog = auxLinearSensors + panel = auxLinearSensor1 + panel = auxLinearSensor2 + field = auxSpeedSensorInputPin1, auxSpeedSensorInputPin1 + field = auxSpeedSensorInputPin2, auxSpeedSensorInputPin2 + +; Sensors->MAP sensor + dialog = mapSensorAnalog, "MAP sensor", yAxis + field = "MAP input", map_sensor_hwChannel + field = "MAP type", map_sensor_type, { map_sensor_hwChannel != 0 } + field = "MAP value low point", map_sensor_lowValue, { map_sensor_hwChannel != 0 && map_sensor_type == 0 } + field = "MAP voltage low point", mapLowValueVoltage, { map_sensor_hwChannel != 0 && map_sensor_type == 0 } + field = "MAP value high point", map_sensor_highValue, { map_sensor_hwChannel != 0 && map_sensor_type == 0 } + field = "MAP voltage high value", mapHighValueVoltage, { map_sensor_hwChannel != 0 && map_sensor_type == 0 } + + dialog = mapCommon, "MAP common settings" + field = "Low value threshold", mapErrorDetectionTooLow + field = "High value threshold", mapErrorDetectionTooHigh + field = "" + field = "Measure Map Only In One Cylinder", measureMapOnlyInOneCylinder + field = "Cylinder count to sample MAP", mapMinBufferLength + + dialog = mapSettings, "", yAxis + panel = mapCommon + panel = mapSensorAnalog + + dialog = baroSettings, "Baro sensor" + field = "Baro input", baroSensor_hwChannel + field = "Low Value", baroSensor_lowValue, {baroSensor_hwChannel != 0} + field = "High Value", baroSensor_highValue, {baroSensor_hwChannel != 0} + field = "Type", baroSensor_type, {baroSensor_hwChannel != 0} + field = "LPS2x Baro SCL", lps25BaroSensorScl, { baroSensor_hwChannel == 0} + field = "LPS2x Baro SDA", lps25BaroSensorSda, { baroSensor_hwChannel == 0} + + dialog = mapCurves, "MAP sampling", yAxis + field = "isMapAveragingEnabled", isMapAveragingEnabled + panel = map_samplingAngleCurve + panel = map_samplingWindowCurve + + dialog = mafSettings, "MAF sensor", yAxis + field = "MAF ADC input", mafAdcChannel + field = "MAF 2 ADC input", maf2AdcChannel + +; Sensors->EGO sensor + dialog = egoSettings_sensor, "EGO sensor" + settingSelector = "EGO Type" + settingOption = "BPSX", afr_v1=0,afr_value1=9,afr_v2=5,afr_value2=19 + settingOption = "Innovate", afr_v1=0,afr_value1=7.35,afr_v2=5,afr_value2=22.39 + settingOption = "14Point7", afr_v1=0,afr_value1=9.996,afr_v2=5,afr_value2=19.992 + settingOption = "PLX", afr_v1=0,afr_value1=10,afr_v2=5,afr_value2=20 + settingOption = "Narrow Band", afr_v1=0.1,afr_value1=15,afr_v2=0.9,afr_value2=14 + settingOption = "AEM", afr_v1=0.5,afr_value1=8.5,afr_v2=4.5,afr_value2=18 + + field = "Type", afr_type +; todo: only use these values for custom! + field = "low voltage", afr_v1 + field = "low value", afr_value1 + field = "high voltage", afr_v2 + field = "high value", afr_value2 + field = "Correction", egoValueShift + + dialog = egoSettings_IO1, "EGO Sensor 1 I/O" + field = "Input channel", afr_hwChannel,{afr_hwChannel != 0 || enableAemXSeries == 0 } + field = "Narrowband Heater output", o2heaterPin, { o2heaterPin != 0 || enableAemXSeries == 0 } + + dialog = egoSettings_IO2, "EGO Sensor 2 I/O" + field = "Input channel", afr_hwChannel2 + + dialog = egoSettings, "", yAxis + field = "Enable CAN Wideband", enableAemXSeries, { canReadEnabled } + field = "Enable Innovate LC-2 Serial", enableInnovateLC2, { auxSerialRxPin && auxSerialTxPin } + panel = egoSettings_IO1 + panel = egoSettings_IO2, {afr_hwChannel != 0 && enableAemXSeries == 0 && !auxSerialRxPin && !auxSerialTxPin} + panel = egoSettings_sensor, {afr_hwChannel != 0 && enableAemXSeries == 0 && !auxSerialRxPin && !auxSerialTxPin} + +; Engine->EGT inputs + dialog = egtInputs, "EGT inputs" + field = "SPI", max31855spiDevice + field = "CS #1", max31855_cs1 + field = "CS #2", max31855_cs2 + field = "CS #3", max31855_cs3 + field = "CS #4", max31855_cs4 + field = "CS #5", max31855_cs5 + field = "CS #6", max31855_cs6 + field = "CS #7", max31855_cs7 + field = "CS #8", max31855_cs8 + +; Engine->idle Settings + dialog = idleSolenoid, "Solenoid" + field = "Idle Solenoid Primary output", idle_solenoidPin, { idle_solenoidPin != 0 || !useStepperIdle } + field = "Idle Solenoid Secondary output", secondSolenoidPin, { idle_solenoidPin != 0 || (!useStepperIdle && isDoubleSolenoidIdle ) } + field = "Idle Solenoid output(s) Mode", idle_solenoidPinMode, !useStepperIdle + field = "Idle Solenoid Frequency", idle_solenoidFrequency, !useStepperIdle + + dialog = etbHbridgeHardwareNo1, "H-Bridge Hardware No1" + field = "No1 Direction #1", etbIo1_directionPin1 + field = "No1 Direction #2", etbIo1_directionPin2 + field = "No1 Control", etbIo1_controlPin + field = "No1 Disable", etbIo1_disablePin + + dialog = etbHbridgeHardwareNo2, "H-Bridge Hardware No2" + field = "No2 Direction #1", etbIo2_directionPin1 + field = "No2 Direction #2", etbIo2_directionPin2 + field = "No2 Control", etbIo2_controlPin + field = "No2 Disable", etbIo2_disablePin + + dialog = etbHbridgeHardware, "ETB H-Bridge Hardware" + field = "Two-wire mode", etb_use_two_wires + panel = etbHbridgeHardwareNo1, { etbFunctions1 != 0 } + panel = etbHbridgeHardwareNo2, { etbFunctions2 != 0 } + + dialog = stepperHbridgeHardwareNo1, "H-Bridge Hardware No1" + field = "No1 Direction #1", stepperDcIo1_directionPin1 + field = "No1 Direction #2", stepperDcIo1_directionPin2 + field = "No1 Disable", stepperDcIo1_disablePin + + dialog = stepperHbridgeHardwareNo2, "H-Bridge Hardware No2" + field = "No2 Direction #1", stepperDcIo2_directionPin1 + field = "No2 Direction #2", stepperDcIo2_directionPin2 + field = "No2 Disable", stepperDcIo2_disablePin + + dialog = stepperHbridgeHardware, "Stepper H-Bridge Hardware" + topicHelp = "stepperHbridgeHardwareHelp" + field = "Inverted driver pins", stepperDcInvertedPins + panel = stepperHbridgeHardwareNo1, { etbFunctions1 != 0 } + panel = stepperHbridgeHardwareNo2, { etbFunctions2 != 0 } + + dialog = idleStepperHw, "Stepper Controller Hardware" + topicHelp = "idleStepperHwHelp" + field = "Idle Stepper Step Pin", idle_stepperStepPin + field = "Idle Stepper Dir Pin", idle_stepperDirectionPin + field = "Idle Stepper Dir Pin Mode", stepperDirectionPinMode + field = "Idle Stepper Enable Pin", stepperEnablePin + field = "Idle Stepper Enable Pin Mode", stepperEnablePinMode + + dialog = stepperDirectDriveHardware, "Stepper Direct-Drive Hardware" + topicHelp = "stepperDirectDriveHardwareHelp" + field = "Stepper A+", stepper_raw_output1 + field = "Stepper A-", stepper_raw_output2 + field = "Stepper B+", stepper_raw_output3 + field = "Stepper B-", stepper_raw_output4 + + dialog = idleStepperHwType, "" + panel = idleStepperHw, { useStepperIdle && !useHbridgesToDriveIdleStepper && !useRawOutputToDriveIdleStepper } + panel = stepperHbridgeHardware, { useStepperIdle && useHbridgesToDriveIdleStepper && !useRawOutputToDriveIdleStepper } + panel = stepperDirectDriveHardware, { useStepperIdle && !useHbridgesToDriveIdleStepper && useRawOutputToDriveIdleStepper } + + dialog = idleStepperGeneral, "" + field = "Drive stepper with dual H bridges", useHbridgesToDriveIdleStepper, useStepperIdle + field = "Drive stepper with PushPull outputs", useRawOutputToDriveIdleStepper, { useStepperIdle && !useHbridgesToDriveIdleStepper } + field = "Stepper reaction time", idleStepperReactionTime, useStepperIdle + field = "Stepper total steps", idleStepperTotalSteps, useStepperIdle + field = "Stepper parking extra steps, %", stepperParkingExtraSteps, useStepperIdle + field = "Force parking every restart", stepperForceParkingEveryRestart, useStepperIdle + + dialog = idleStepperMicro, "Micro-Stepping" + field = "Stepping Mode", stepperNumMicroSteps, useHbridgesToDriveIdleStepper + field = "Min. Duty Cycle", stepperMinDutyCycle, { useHbridgesToDriveIdleStepper && stepperNumMicroSteps > 1 } + field = "Max. Duty Cycle", stepperMaxDutyCycle, { useHbridgesToDriveIdleStepper && stepperNumMicroSteps > 1 } + + dialog = idleStepper, "Stepper" + panel = idleStepperGeneral + panel = idleStepperHwType + panel = idleStepperMicro + + dialog = idleHwType, "Idle Valve Hardware", yAxis + panel = idleSolenoid + panel = idleStepper + + dialog = idlehw, "", yAxis + field = "!ECU reboot needed to apply these settings" + field = "Use Stepper", useStepperIdle + field = "Double Solenoid Mode", isDoubleSolenoidIdle + field = "Electronic throttle idle range", etbIdleThrottleRange + panel = idleHwType + + dialog = idlePidSettings, "Closed Loop Idle" + field = "P-factor", idleRpmPid_pFactor + field = "I-factor", idleRpmPid_iFactor + field = "derivativeFilterLoss", idle_derivativeFilterLoss + field = "antiwindupFreq", idle_antiwindupFreq + field = "D-factor", idleRpmPid_dFactor + field = "Min", idleRpmPid_minValue + field = "Max", idleRpmPid_maxValue + field = "iTerm Min", idlerpmpid_iTermMin + field = "iTerm Max", idlerpmpid_iTermMax + field = "PID Extra for low RPM", pidExtraForLowRpm + field = idleIncrementalPidCic, idleIncrementalPidCic + field = "use Cic Pid", useCicPidForIdle + field = "Use IAC PID Multiplier Table", useIacPidMultTable + + dialog = idleOpenLoop, "Open Loop Idle" + slider = "Open loop base position", manIdlePosition, horizontal + field = "A/C adder", acIdleExtraOffset + field = "A/C RPM target", acIdleRpmTarget + field = "Fan #1 adder", fan1ExtraIdle + field = "Fan #2 adder", fan2ExtraIdle + field = "Dashpot/Taper Initial IAC Adder", iacByTpsTaper + + dialog = idleGating, "Idle Detection Thresholds" + field = "TPS threshold", idlePidDeactivationTpsThreshold + field = "RPM upper limit", idlePidRpmUpperLimit + field = "RPM deadzone", idlePidRpmDeadZone + field = "Max vehicle speed", maxIdleVss + + dialog = idleExtra, "Extra Idle Features" + field = "Use idle ignition table", useSeparateAdvanceForIdle + field = "Use idle VE table", useSeparateVeForIdle + field = "Override Idle VE table load axis", idleVeOverrideMode, { useSeparateVeForIdle == 1 } + field = "Use idle tables for cranking taper", useSeparateIdleTablesForCrankingTaper + field = "Use coasting idle table", useIacTableForCoasting + field = "Dashpot coasting-to-idle Hold time", iacByTpsHoldTime + field = "Dashpot coasting-to-idle Decay time", iacByTpsDecayTime + + dialog = idleSettings, "", yAxis + field = "Idle control mode", idleMode + + field = "! Solenoid idle control is disabled at zero RPM" + +; gating applies both to open loop and closed loop! + panel = idleGating +; closed loop mode is an addition on top of open loop, so idleOpenLoop stays open even when closed loop is selected + panel = idleOpenLoop + panel = idlePidSettings, { idleMode == 0 } + panel = idleExtra + + dialog = idleTimingPidCorrDialog, "", yAxis + field = "" + field = "Enable closed loop idle ignition timing", useIdleTimingPidControl + field = "" + field = "#Gain is in degrees advance per rpm away from target" + field = "#A good starting point is 0.1 = 10 deg per 100 rpm" + field = "Proportional gain", idleTimingPid_pFactor, {useIdleTimingPidControl == 1} + field = "Integral gain", idleTimingPid_iFactor, {useIdleTimingPidControl == 1} + field = "Derivative gain", idleTimingPid_dFactor, {useIdleTimingPidControl == 1} + field = "" + field = "Min adjustment (retard)", idleTimingPid_minValue, {useIdleTimingPidControl == 1} + field = "Max adjustment (advance)", idleTimingPid_maxValue, {useIdleTimingPidControl == 1} + field = "" + field = "Soft entry time", idleTimingSoftEntryTime, {useIdleTimingPidControl == 1} + field = "" + field = "#Use debug mode 'Timing' to view idle timing adjustment" + +; Engine->Fan Settings + dialog = fan1Settings, "Fan 1" + field = "Output", fanPin, 1, { uiMode == 0 || uiMode == 1 } + field = "Output mode", fanPinMode, { uiMode == 0 || uiMode == 1 } + field = "On temperature", fanOnTemperature + field = "Off temperature", fanOffTemperature + field = "Enable with AC", enableFan1WithAc + field = "Disable when engine stopped", disableFan1WhenStopped + field = "Idle adder", fan1ExtraIdle + + dialog = fan2Settings, "Fan 2" + field = "Output", fan2Pin + field = "Output mode", fan2PinMode + field = "On temperature", fan2OnTemperature + field = "Off temperature", fan2OffTemperature + field = "Enable with AC", enableFan2WithAc + field = "Disable when engine stopped", disableFan2WhenStopped + field = "Idle adder", fan2ExtraIdle + + dialog = fanTest, "", xAxis + commandButton = "Test Fan 1", cmd_test_fan_1 + commandButton = "Test Fan 2", cmd_test_fan_2 + + indicatorPanel = fanIndicators, 2 + indicator = { isFanOn }, "fan 1 off", "fan 1 on", white, black, green, black + indicator = { isFan2On }, "fan 2 off", "fan 2 on", white, black, green, black + + dialog = acSettingsWest, "A/C Settings" + field = "A/C switch", acSwitch + field = "A/C switch mode", acSwitchMode + field = "A/C Relay", acRelayPin + field = "A/C Relay Mode", acRelayPinMode + field = "A/C compressor delay", acDelay + field = "Max RPM", maxAcRpm + field = "Max CLT", maxAcClt + field = "Max TPS", maxAcTps + field = "A/C Idle adder", acIdleExtraOffset + field = "A/C Idle RPM", acIdleRpmTarget + + dialog = acSettings, "", border + panel = acSettingsWest, West + panel = ac_controlIndicatorPanel, East + + dialog = fanSetting, "Fan Settings" + panel = fan1Settings + panel = fan2Settings + panel = fanTest + panel = fanIndicators + + dialog = fuelPumpDialog, "Fuel Pump" + field = "Output", fuelPumpPin + field = "Output mode", fuelPumpPinMode + field = "Prime duration", startUpFuelPumpDuration + commandButton = "Test Fuel Pump", cmd_test_fuel_pump + +; Controller->Actuator Outputs + dialog = mainRelayDialog, "Main relay output" + field = "Output", mainRelayPin + field = "Output mode", mainRelayPinMode + commandButton = "Test Main Relay", cmd_test_main_relay + + dialog = starterRelayDialog, "Starter Disable" + field = "Output", starterRelayDisablePin + field = "Output mode", starterRelayDisablePinMode + commandButton = "Test Starter Disable", cmd_test_starter_disable_relay + + dialog = startStopDialog, "Starter Control" + field = "Require Foot On Brake To Crank", requireFootOnBrakeToCrank + field = "Start/Stop Button input", startStopButtonPin + field = "Start/Stop Button input mode", startStopButtonMode + field = "Starter Control", starterControlPin, { starterControlPin != 0 || startStopButtonPin != 0} + field = "Start cranking maximum time", startCrankingDuration, {startStopButtonPin != 0} + field = "Suppress On Start Up (Ms)", startButtonSuppressOnStartUpMs, {startStopButtonPin != 0} + commandButton = "Test Starter Relay", cmd_test_starter_relay + +; Engine->MIL Settings + dialog = malfunctionDialog, "Check Engine Settings" + field = "Output", malfunctionIndicatorPin + field = "Output mode", malfunctionIndicatorPinMode + field = "Warning Period", warningPeriod + commandButton = "Test Check Engine", cmd_test_check_engine_light + + dialog = tachSettings, "Tachometer output" + field = "Output", tachOutputPin + field = "Output mode", tachOutputPinMode + field = "Pulse Mode", tachPulseDurationAsDutyCycle + field = "Pulse duration", tachPulseDuractionMs + field = "Pulse per Rev", tachPulsePerRev + + dialog = speedoSettings, "Speedometer output" + field = "Output", speedometerOutputPin + field = "Pulse per km", speedometerPulsePerKm, { speedometerOutputPin } + + dialog = outputsDialogLeft + panel = mainRelayDialog + panel = fuelPumpDialog + panel = tachSettings + + dialog = outputsDialogRight + panel = startStopDialog + panel = starterRelayDialog + panel = speedoSettings + panel = malfunctionDialog + + dialog = outputsDialog, "Outputs", border + panel = outputsDialogLeft, West + panel = fanSetting, Center + panel = outputsDialogRight, East + + dialog = statusLeds, "Status LEDs" + field = "Trigger error LED", triggerErrorPin + field = "Debug Trigger Sync", debugTriggerSync + + dialog = softwareKnockCfg, "Sense" + field = "Enable", enableSoftwareKnock + field = "Cylinder Bore", cylinderBore + field = "Knock filter frequency", knockBandCustom, {enableSoftwareKnock} + field = "knockDetectionWindowStart",knockDetectionWindowStart, {enableSoftwareKnock} + field = "knockSamplingDuration", knockSamplingDuration, {enableSoftwareKnock} + + field = "" + field = "Select the nearest sensor for each cylinder" + field = "Cylinder 1", knockBankCyl1, {enableSoftwareKnock} + field = "Cylinder 2", knockBankCyl2, {enableSoftwareKnock && cylindersCount >= 2} + field = "Cylinder 3", knockBankCyl3, {enableSoftwareKnock && cylindersCount >= 3} + field = "Cylinder 4", knockBankCyl4, {enableSoftwareKnock && cylindersCount >= 4} + field = "Cylinder 5", knockBankCyl5, {enableSoftwareKnock && cylindersCount >= 5} + field = "Cylinder 6", knockBankCyl6, {enableSoftwareKnock && cylindersCount >= 6} + field = "Cylinder 7", knockBankCyl7, {enableSoftwareKnock && cylindersCount >= 7} + field = "Cylinder 8", knockBankCyl8, {enableSoftwareKnock && cylindersCount >= 8} + field = "Cylinder 9", knockBankCyl9, {enableSoftwareKnock && cylindersCount >= 9} + field = "Cylinder 10", knockBankCyl10, {enableSoftwareKnock && cylindersCount >= 10} + field = "Cylinder 11", knockBankCyl11, {enableSoftwareKnock && cylindersCount >= 11} + field = "Cylinder 12", knockBankCyl12, {enableSoftwareKnock && cylindersCount >= 12} + + dialog = softwareKnockResponseCfg, "Response" + field = knockRetardAggression, knockRetardAggression + field = knockRetardReapplyRate, knockRetardReapplyRate + + dialog = softwareKnockLeft, "" + panel = softwareKnockCfg + panel = softwareKnockResponseCfg + + dialog = softwareKnock, "Software Knock", border + panel = softwareKnockLeft, West + panel = knockThresholdCurve, Center + +; Engine->hip9011 Settings + dialog = hipFunction, "HIP9011 Settings (knock decoder)" + field = "Enabled", isHip9011Enabled + field = "!ECU reboot needed to apply these settings" + field = "IntHold pin (hip9011 input)", hip9011IntHoldPin, {isHip9011Enabled == 1} + field = "IntHold pin (hip9011 input) mode", hip9011IntHoldPinMode, {isHip9011Enabled == 1} + field = "ChipSelect pin", hip9011CsPin, {isHip9011Enabled == 1} + field = "ChipSelect mode", hip9011CsPinMode, {isHip9011Enabled == 1} + field = "hip Output/stm input", hipOutputChannel, {isHip9011Enabled == 1} + field = "prescaler & SDO", hip9011PrescalerAndSDO, {isHip9011Enabled == 1} + field = "knockDetectionWindowStart", knockDetectionWindowStart, {isHip9011Enabled == 1} + field = "knockDetectionWindowEnd", knockDetectionWindowEnd, {isHip9011Enabled == 1} + field = "cylinder bore (mm)", cylinderBore, {isHip9011Enabled == 1} + field = "Band Freq override", knockBandCustom, {isHip9011Enabled == 1} + field = "SPI device", hip9011SpiDevice, {isHip9011Enabled == 1} + panel = knockThresholdCurve + + dialog = spiFunction, "SPI settings" + field = "!ECU reboot needed to apply these settings" + field = "SPI1 enable", is_enabled_spi_1 + field = "SPI1 MOSI", spi1mosiPin, {is_enabled_spi_1 == 1} + field = "SPI1mosi mode", spi1MosiMode, {is_enabled_spi_1 == 1} + field = "SPI1 MISO", spi1misoPin, {is_enabled_spi_1 == 1} + field = "SPI1miso mode", spi1MisoMode, {is_enabled_spi_1 == 1} + field = "SPI1 SCK", spi1sckPin, {is_enabled_spi_1 == 1} + field = "SPI1sck mode", spi1SckMode, {is_enabled_spi_1 == 1} + + field = "SPI2 enable", is_enabled_spi_2 + field = "SPI2 MOSI", spi2mosiPin, {is_enabled_spi_2 == 1} + field = "SPI2mosi mode", spi2MosiMode, {is_enabled_spi_2 == 1} + field = "SPI2 MISO", spi2misoPin, {is_enabled_spi_2 == 1} + field = "SPI2miso mode", spi2MisoMode, {is_enabled_spi_2 == 1} + field = "SPI2 SCK", spi2sckPin, {is_enabled_spi_2 == 1} + field = "SPI2sck mode", spi2SckMode, {is_enabled_spi_2 == 1} + + field = "SPI3 enable", is_enabled_spi_3 + field = "SPI3 MOSI", spi3mosiPin, {is_enabled_spi_3 == 1} + field = "SPI3mosi mode", spi3MosiMode, {is_enabled_spi_3 == 1} + field = "SPI3 MISO", spi3misoPin, {is_enabled_spi_3 == 1} + field = "SPI3miso mode", spi3MisoMode, {is_enabled_spi_3 == 1} + field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1} + field = "SPI3sck mode", spi3SckMode, {is_enabled_spi_3 == 1} + field = "LIS302DLCsPin", LIS302DLCsPin + + dialog = stftPartitioning, "Region Configuration" + field = "Idle region RPM", stft_maxIdleRegionRpm + field = "Overrun region load", stft_maxOverrunLoad + field = "Power region load", stft_minPowerLoad + + dialog = stftPartitionSettingsMain, "Main Region", xAxis + field = "Time const", stft_cellCfgs4_timeConstant + field = "Max add", stft_cellCfgs4_maxAdd + field = "Max remove", stft_cellCfgs4_maxRemove + + dialog = stftPartitionSettingsIdle, "Idle Region", xAxis + field = "Time const", stft_cellCfgs1_timeConstant + field = "Max add", stft_cellCfgs1_maxAdd + field = "Max remove", stft_cellCfgs1_maxRemove + + dialog = stftPartitionSettingsPower, "Power Region", xAxis + field = "Time const", stft_cellCfgs3_timeConstant + field = "Max add", stft_cellCfgs3_maxAdd + field = "Max remove", stft_cellCfgs3_maxRemove + + dialog = stftPartitionSettingsOverrun, "Overrun Region", xAxis + field = "Time const", stft_cellCfgs2_timeConstant + field = "Max add", stft_cellCfgs2_maxAdd + field = "Max remove", stft_cellCfgs2_maxRemove + + dialog = fuelClosedLoopDialog, "Closed loop fuel correction" + field = "Enabled", fuelClosedLoopCorrectionEnabled + + field = "Startup delay" stft_startupDelay, {fuelClosedLoopCorrectionEnabled == 1} + field = "Minimum CLT for correction", stft_minClt, {fuelClosedLoopCorrectionEnabled == 1} + field = "Minimum AFR for correction", stft_minAfr, {fuelClosedLoopCorrectionEnabled == 1} + field = "Maximum AFR for correction", stft_maxAfr, {fuelClosedLoopCorrectionEnabled == 1} + field = "Adjustment deadband", stft_deadband, {fuelClosedLoopCorrectionEnabled == 1} + field = "Ignore error magnitude", stftIgnoreErrorMagnitude, {fuelClosedLoopCorrectionEnabled == 1} + + panel = stftPartitioning, {fuelClosedLoopCorrectionEnabled == 1} + panel = stftPartitionSettingsMain, {fuelClosedLoopCorrectionEnabled == 1} + panel = stftPartitionSettingsIdle, {fuelClosedLoopCorrectionEnabled == 1} + panel = stftPartitionSettingsPower, {fuelClosedLoopCorrectionEnabled == 1} + panel = stftPartitionSettingsOverrun, {fuelClosedLoopCorrectionEnabled == 1} + + dialog = lambdaProtectionLeft, "" + field = "Enable lambda protection", lambdaProtectionEnable + field = "Check above load", lambdaProtectionMinLoad, { lambdaProtectionEnable } + field = "and above TPS", lambdaProtectionMinTps, { lambdaProtectionEnable } + field = "and above RPM", lambdaProtectionMinRpm, { lambdaProtectionEnable } + field = "and after delay", lambdaProtectionTimeout { lambdaProtectionEnable } + field = "Then cut fuel until:" + field = "Load less than", lambdaProtectionRestoreLoad, { lambdaProtectionEnable } + field = "and TPS less than", lambdaProtectionRestoreTps, { lambdaProtectionEnable } + field = "and RPM less than", lambdaProtectionRestoreRpm, { lambdaProtectionEnable } + + dialog = lambdaProtectionRight, "Lambda Difference Table" + panel = lambdaMaxDeviationTableTbl + + dialog = lambdaProtection, "Lambda Protection", border + panel = lambdaProtectionLeft, West + panel = lambdaProtectionRight, East + + dialog = vvtPidDialog0, "Configuration" + field = "Activation Delay", vvtActivationDelayMs + field = "Do not control below RPM", vvtControlMinRpm + field = "VVT solenoid bank 1 intake", vvtPins1 + field = "VVT solenoid bank 1 exhaust", vvtPins2 + field = "VVT solenoid bank 2 intake", vvtPins3 + field = "VVT solenoid bank 2 exhaust", vvtPins4 + field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} + field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } + field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } + + dialog = vvtPidDialog1, "Intake PID" + field = "offset", auxPid1_offset, {vvtPins1 != 0} + field = "P factor", auxPid1_pFactor, {vvtPins1 != 0} + field = "I factor", auxPid1_iFactor, {vvtPins1 != 0} + field = "D factor", auxPid1_dFactor, {vvtPins1 != 0} + field = "Min", auxPid1_minValue, {vvtPins1 != 0} + field = "Max", auxPid1_maxValue, {vvtPins1 != 0} + commandButton = "Bench bank 1", cmd_test_vvt0_valve, { engineTurnedRecently == 0 } + commandButton = "Bench bank 2", cmd_test_vvt2_valve, { engineTurnedRecently == 0 } + + dialog = vvtPidDialog2, "Exhaust PID" + field = "offset", auxPid2_offset, {vvtPins2 != 0} + field = "P factor", auxPid2_pFactor, {vvtPins2 != 0} + field = "I factor", auxPid2_iFactor, {vvtPins2 != 0} + field = "D factor", auxPid2_dFactor, {vvtPins2 != 0} + field = "Min", auxPid2_minValue, {vvtPins2 != 0} + field = "Max", auxPid2_maxValue, {vvtPins2 != 0} + commandButton = "Bench bank 1", cmd_test_vvt1_valve, { engineTurnedRecently == 0 } + commandButton = "Bench bank 2", cmd_test_vvt3_valve, { engineTurnedRecently == 0 } + + dialog = vvtPidDialog, "VVT Configuration & PID", border + panel = vvtPidDialog0, West + panel = vvtPidDialog1, Center + panel = vvtPidDialog2, East + +; Engine->Battery & Alternator + dialog = batteryDialog, "Battery Settings", yAxis + field = "vBatt ADC input", vbattAdcChannel + field = "Battery Input Divider Coefficient", vbattDividerCoeff + dialog = alternator, "Alternator Settings", yAxis + field = "Enabled", isAlternatorControlEnabled + field = "Target", targetVBatt, {isAlternatorControlEnabled == 1} + field = "Control output", alternatorControlPin, {isAlternatorControlEnabled == 1} + field = "Control output mode", alternatorControlPinMode, {isAlternatorControlEnabled == 1} + field = "PWM frequency", alternatorPwmFrequency, {isAlternatorControlEnabled == 1} + field = "A/C duty adder", acRelayAlternatorDutyAdder, {isAlternatorControlEnabled == 1} + field = "#PID control" + field = "offset", alternatorControl_offset, {isAlternatorControlEnabled == 1} + field = "P factor", alternatorControl_pFactor, {isAlternatorControlEnabled == 1} + field = "I factor", alternatorControl_iFactor, {isAlternatorControlEnabled == 1} + field = "D factor", alternatorControl_dFactor, {isAlternatorControlEnabled == 1} + field = "Min", alternatorControl_minValue, {isAlternatorControlEnabled == 1} + field = "Max", alternatorControl_maxValue, {isAlternatorControlEnabled == 1} + field = "#% duty = Pterm + Iterm + Dterm + offset%" + + dialog = energySystems, "Battery and Alternator Settings", yAxis + panel = batteryDialog + panel = alternator + + dialog = speedSensorAnalog, "Speed sensor" + field = "Input", vehicleSpeedSensorInputPin + field = "Filter parameter", vssFilterReciprocal, { vehicleSpeedSensorInputPin != 0 } + +; +; We prefer quantities that users can actually measure or inspect without math, so we have +; two separate natural settings here without one 'sensor tooth to wheel revolution' ratio +; + field = "Wheel revolutions per kilometer", driveWheelRevPerKm + field = "Speed sensor gear ratio", vssGearRatio, { vehicleSpeedSensorInputPin != 0 } + field = "Speed sensor tooth count", vssToothCount, { vehicleSpeedSensorInputPin != 0 } + + dialog = speedSensorCan, "CAN Vehicle Speed" + field = "Enable CAN VSS", enableCanVss, { canReadEnabled } + field = "CAN VSS type", canVssNbcType, { enableCanVss } + field = "CAN VSS scaling", canVssScaling, { canReadEnabled } + + dialog = speedSensorLeft, "", yAxis + panel = speedSensorAnalog, { enableCanVss == 0 } + panel = speedSensorCan + + dialog = gearDetection, "Gear Detection" + field = "Wheel revolutions per kilometer", driveWheelRevPerKm + field = "Final drive ratio", finalGearRatio + field = "" + field = "Forward gear count", totalGearsCount + field = "" + field = "1st gear", gearRatio1, { totalGearsCount >= 1 } + field = "2nd gear", gearRatio2, { totalGearsCount >= 2 } + field = "3rd gear", gearRatio3, { totalGearsCount >= 3 } + field = "4th gear", gearRatio4, { totalGearsCount >= 4 } + field = "5th gear", gearRatio5, { totalGearsCount >= 5 } + field = "6th gear", gearRatio6, { totalGearsCount >= 6 } + field = "7th gear", gearRatio7, { totalGearsCount >= 7 } + field = "8th gear", gearRatio8, { totalGearsCount >= 8 } + + dialog = speedSensor, "Speed sensor", xAxis + panel = speedSensorLeft + gauge = VSSGauge + panel = gearDetection + +; Engine->Other inputs + dialog = analogInputSettings, "Analog Input Settings" + field = "!ECU reboot needed to apply these settings" + field = "ADC vRef voltage", adcVcc + field = "Use fixed baro corr from MAP", useFixedBaroCorrFromMap + field = "Analog divider ratio", analogInputDividerCoefficient + + +; Board->Connection + dialog = tsPort, "Calibration Secondary Serial" + field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed + field = "TX pin", binarySerialTxPin + field = "RX pin", binarySerialRxPin + + dialog = canHw1, "Primary CAN" + field = "Verbose Can", verboseCan + field = "Bitrate", canBaudRate + field = "RX pin", canRxPin + field = "TX pin", canTxPin + field = "Allow OpenBLT", canOpenBLT + + dialog = canHw2, "Secondary CAN" + field = "Verbose Can2", verboseCan2 + field = "Bitrate", can2BaudRate + field = "RX pin", can2RxPin + field = "TX pin", can2TxPin + field = "Allow OpenBLT", can2OpenBLT + + dialog = canBus, "CAN Bus" + field = "CAN read enabled", canReadEnabled + field = "CAN write enabled", canWriteEnabled + field = "CAN dash type", canNbcType + field = "inertia measurement unit", imuType + field = "Enable rusEFI CAN broadcast", enableVerboseCanTx + field = "rusEFI CAN data bus", canBroadcastUseChannelTwo + field = "rusEFI CAN data base address", verboseCanBaseAddress + field = "rusEFI CAN data address type", rusefiVerbose29b + field = "rusEFI CAN data period", canSleepPeriodMs + + dialog = canBus2, "Secondary CAN Bus" + + dialog = canBusMain, "CAN Bus Communication", yAxis + panel = canBus + + panel = canHw1 + panel = canHw2 + + dialog = auxSerial, "AUX Sensor Serial" + field = "RX pin", auxSerialRxPin + field = "TX pin", auxSerialTxPin + field = "Serial Baud Rate", auxSerialSpeed + + dialog = sdCard, "SD Card Logger" + field = "#rusEFI logs to SD when powered without USB connected" + field = "#rusEFI connects SD to your PC when powered by USB" + field = "Enable SD Card", isSdCardEnabled + field = "CS Pin", sdCardCsPin + field = "SPI", sdCardSpiDevice + field = "SD logger rate", sdCardLogFrequency + field = "SD logger mode", sdTriggerLog + + dialog = tle8888, "TLE8888", yAxis + field = "TLE8888 Chip Select", tle8888_cs + field = "TLE8888 SPI", tle8888spiDevice + field = "Mode", tle8888mode + field = "useTLE8888 cranking reset hack", useTLE8888_cranking_hack + field = "useTLE8888 stepper", useTLE8888_stepper + commandButton = "Reinit", cmd_tle8888_init + field = "L9779 SPI", tle8888spiDevice + + dialog = connection, "", yAxis + panel = tsPort + field = "uartConsoleSerialSpeed", uartConsoleSerialSpeed + panel = auxSerial + field = enableKline, enableKline + + dialog = monitoringSettings, "rusEFI Console Settings" + field = "Sensor Sniffer", sensorChartMode + field = " Threshold", sensorSnifferRpmThreshold + field = "Engine Sniffer Threshold", engineSnifferRpmThreshold + + dialog = generalSettings, "Fuel" + field = "!https://rusefi.com/s/fuel" + field = "Fuel strategy", fuelAlgorithm + + dialog = debugging, "Debug" + field = "!https://rusefi.com/s/debugmode" + field = "Debug mode", debugMode + + dialog = limitsSettings, "Limits" + field = "Cut fuel on RPM limit", cutFuelOnHardLimit + field = "Cut spark on RPM limit", cutSparkOnHardLimit + field = "Use CLT-based RPM limit curve", useCltBasedRpmLimit, { cutFuelOnHardLimit || cutSparkOnHardLimit } + field = "RPM hard limit", rpmHardLimit, { (cutFuelOnHardLimit || cutSparkOnHardLimit) && !useCltBasedRpmLimit } + field = "RPM limit hysteresis", rpmHardLimitHyst + field = "Boost cut pressure", boostCutPressure + field = "Boost cut pressure hysteresis", boostCutPressureHyst + field = "Minimum oil pressure after start", minOilPressureAfterStart + + dialog = softRpmLimitSettings, "Soft RPM Limit" + field = "Window size", rpmSoftLimitWindowSize + field = "Timing retard", rpmSoftLimitTimingRetard, { cutSparkOnHardLimit } + field = "Fuel added", rpmSoftLimitFuelAdded, { cutFuelOnHardLimit } + + dialog = etbLimits, "Electronic Throttle Limiting" + field = "Smoothly close the throttle to limit RPM." + field = "Soft limiter start", etbRevLimitStart + field = "Soft limiter range", etbRevLimitRange + + dialog = limitsAndFallbackLeft + panel = limitsSettings + panel = softRpmLimitSettings, West, { (cutFuelOnHardLimit || cutSparkOnHardLimit) && !useCltBasedRpmLimit } + panel = etbLimits + + dialog = limitsAndFallbackCenter, "CLT-based RPM Limit" + panel = cltRevLimitCurve + + dialog = limitsAndFallback, "Limits and fallbacks", border + panel = limitsAndFallbackLeft, West + panel = limitsAndFallbackCenter, Center, { (cutFuelOnHardLimit || cutSparkOnHardLimit) && useCltBasedRpmLimit } + +; Engine->Base Engine Settings + dialog = engineChars, "Base Engine Settings" + topicHelp = "baseHelp" + panel = baseEngineConfig + panel = engineMetadata + panel = generalSettings + panel = debugging + + dialog = crankingFuel, "Fuel" + field = "Injection mode", crankingInjectionMode + field = "Fuel Source For Cranking", useRunningMathForCranking + field = "Base fuel mass", cranking_baseFuel, {useRunningMathForCranking == 0} + + dialog = crankingIAC, "Idle air valve" + field = "Cranking base IAC position", crankingIACposition + field = "After cranking IAC taper duration",afterCrankingIACtaperDuration + field = "Override cranking IAC CLT multiplier", overrideCrankingIacSetting + + dialog = crankingIgnition, "Ignition" + field = "Timing Advance mode", useSeparateAdvanceForCranking + field = "Fixed cranking advance", crankingTimingAngle, {useSeparateAdvanceForCranking == 0} + field = "Fixed Cranking Dwell", ignitionDwellForCrankingMs + + dialog = primingFuelPulsePanel, "Priming fuel pulse" + field = "Priming delay", primingDelay + panel = primingPulse + + dialog = crankingAdv, "Advanced" + field = "Enable flood clear", isCylinderCleanupEnabled + field = "Enable faster engine spin-up", isFasterEngineSpinUpEnabled + field = "Use Advance Corrections for cranking", useAdvanceCorrectionsForCranking + field = "Use Flex Fuel cranking table", flexCranking + +; Cranking->Cranking Settings + dialog = crankingDialog, "Cranking Settings" + field = "Cranking RPM limit", cranking_rpm + panel = crankingFuel + panel = crankingIgnition + panel = crankingIAC + panel = crankingAdv + + dialog = TpsAccelPanel, "TPS" + field = "Set 'Debug Mode' to see detailed 'TPS acceleration enrichment' diagnostics" + field = "Length", tpsAccelLookback + field = "Accel Threshold", tpsAccelEnrichmentThreshold + field = "Decel Threshold", tpsDecelEnleanmentThreshold +; field = "Decel Multiplier", tpsDecelEnleanmentMultiplier + field = "#Accelerator Pump model:" + field = "Fraction Period", tpsAccelFractionPeriod + field = "Fraction Divisor", tpsAccelFractionDivisor + + dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)" + field = "Wall fueling model type", complexWallModel + field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 } + field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 } + + +; Tuning->AccelEnrichment + dialog = AccelEnrich, "Accel/Decel Enrichment" + panel = TpsAccelPanel + panel = WallWettingAccelPanel + field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs + + + dialog = wwTauCurves, "Wall wetting AE evaporation time" + field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP." + panel = wwTauCltCurve + panel = wwTauMapCurve + + dialog = wwBetaCurves, "Wall wetting AE impact fraction" + field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP." + panel = wwBetaCltCurve + panel = wwBetaMapCurve + + dialog = auxValvesIO, "Outputs" + field = "aux valve #1", auxValves1 + field = "aux valve #2", auxValves2 + + dialog = scriptSetting, "Setting" + field = "!Use rusEFI console for Lua script editing" + field = "Set number is not associated with the output number." + field = "Set number, only the cell number with some numbers." + field = "Name #1", scriptSettingName1 + field = "Setting #1", scriptSetting1 + field = "Name #2", scriptSettingName2 + field = "Setting #2", scriptSetting2 + field = "Name #3", scriptSettingName3 + field = "Setting #3", scriptSetting3 + field = "Name #4", scriptSettingName4 + field = "Setting #4", scriptSetting4 + field = "Name #5", scriptSettingName5 + field = "Setting #5", scriptSetting5 + field = "Name #6", scriptSettingName6 + field = "Setting #6", scriptSetting6 + + dialog = scriptSettingDialog, "Script Settings", border + panel = scriptSetting, East + + dialog = luaDigitalInputsLeftDialog + field = "Digital #1", luaDigitalInputPins1 + field = "Digital #2", luaDigitalInputPins2 + field = "Digital #3", luaDigitalInputPins3 + field = "Digital #4", luaDigitalInputPins4 + field = "Digital #5", luaDigitalInputPins5 + field = "Digital #6", luaDigitalInputPins6 + field = "Digital #7", luaDigitalInputPins7 + field = "Digital #8", luaDigitalInputPins8 + + dialog = luaDigitalInputsRightDialog + field = "Mode #1", luaDigitalInputPinModes1 + field = "Mode #2", luaDigitalInputPinModes2 + field = "Mode #3", luaDigitalInputPinModes3 + field = "Mode #4", luaDigitalInputPinModes4 + field = "Mode #5", luaDigitalInputPinModes5 + field = "Mode #6", luaDigitalInputPinModes6 + field = "Mode #7", luaDigitalInputPinModes7 + field = "Mode #8", luaDigitalInputPinModes8 + + dialog = luaDigitalInputsDialog, "Lua Digital Aux Inputs", border + panel = luaDigitalInputsLeftDialog, West + panel = luaDigitalInputsRightDialog, East + + dialog = auxInputsDialog, "Lua Analog Inputs" + field = "ADC #1", auxAnalogInputs1 + field = "ADC #2", auxAnalogInputs2 + field = "ADC #3", auxAnalogInputs3 + field = "ADC #4", auxAnalogInputs4 + field = "ADC #5", auxAnalogInputs5 + field = "ADC #6", auxAnalogInputs6 + field = "ADC #7", auxAnalogInputs7 + field = "ADC #8", auxAnalogInputs8 + + dialog = luaOutputs, "Lua Outputs" + field = "!Use rusEFI console for Lua script editing" + field = "#Call startPwm to initialize, then call" + field = "#setPwmDuty and setPwmFreq to vary duty/freq" + field = "#See rusefi.com/s/lua for more info" + field = "output #0", luaOutputPins1 + field = "output #1", luaOutputPins2 + field = "output #2", luaOutputPins3 + field = "output #3", luaOutputPins4 + field = "output #4", luaOutputPins5 + field = "output #5", luaOutputPins6 + field = "output #6", luaOutputPins7 + field = "output #7", luaOutputPins8 + + dialog = transmissionPanel + field = "TCU Enabled" tcuEnabled + field = "Gear Controller" gearControllerMode, { tcuEnabled } + field = "Transmission Controller" transmissionControllerMode, { tcuEnabled } + + dialog = shiftSolenoidPanel, "Shift Solenoids" + field = "Solenoid 1 output" tcu_solenoid1, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 1 output Mode" tcu_solenoid_mode1, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 2 output" tcu_solenoid2, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 2 output Mode" tcu_solenoid_mode2, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 3 output" tcu_solenoid3, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 3 output Mode" tcu_solenoid_mode3, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 4 output" tcu_solenoid4, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 4 output Mode" tcu_solenoid_mode4, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 5 output" tcu_solenoid5, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 5 output Mode" tcu_solenoid_mode5, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 6 output" tcu_solenoid6, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "Solenoid 6 output Mode" tcu_solenoid_mode6, { tcuEnabled && (transmissionControllerMode == 1 || transmissionControllerMode == 2) } + field = "3-2 Solenoid output" tcu_32_solenoid_pin, { tcuEnabled && (transmissionControllerMode == 2) } + field = "3-2 Solenoid output mode" tcu_32_solenoid_pin_mode, { tcuEnabled && (transmissionControllerMode == 2) } + field = "3-2 Solenoid Frequency" tcu_32_solenoid_freq, { tcuEnabled && (transmissionControllerMode == 2) } + + dialog = otherSolenoidPanel, "Other Solenoids" + field = "TCC On/Off Solenoid Pin" tcu_tcc_onoff_solenoid, { tcuEnabled && (transmissionControllerMode == 2) } + field = "TCC On/Off Solenoid Pin Mode" tcu_tcc_onoff_solenoid_mode, { tcuEnabled && (transmissionControllerMode == 2) } + field = "TCC PWM Solenoid Pin" tcu_tcc_pwm_solenoid, { tcuEnabled && (transmissionControllerMode == 2) } + field = "TCC PWM Solenoid Pin Mode" tcu_tcc_pwm_solenoid_mode, { tcuEnabled && (transmissionControllerMode == 2) } + field = "TCC PWM Solenoid Frequency" tcu_tcc_pwm_solenoid_freq, { tcuEnabled && (transmissionControllerMode == 2) } + field = "Pressure Control Solenoid Pin" tcu_pc_solenoid_pin, { tcuEnabled && (transmissionControllerMode == 2) } + field = "Pressure Control Solenoid Pin Mode" tcu_pc_solenoid_pin_mode, { tcuEnabled && (transmissionControllerMode == 2) } + field = "Pressure Control Solenoid Frequency" tcu_pc_solenoid_freq, { tcuEnabled && (transmissionControllerMode == 2) } + + dialog = buttonShiftInputPanel, "Switch/Button Shift" + field = "Upshift Pin" tcuUpshiftButtonPin, { tcuEnabled && gearControllerMode == 1 } + field = "Upshift Pin Mode" tcuUpshiftButtonPinMode, { tcuEnabled && gearControllerMode == 1 } + field = "Downshift Pin" tcuDownshiftButtonPin, { tcuEnabled && gearControllerMode == 1 } + field = "Downshift Pin Mode" tcuDownshiftButtonPinMode, { tcuEnabled && gearControllerMode == 1 } + + dialog = inputSpeedSensorPanel, "Input Speed Sensor" + field = "Input Pin", tcuInputSpeedSensorPin + field = "Filter parameter", issFilterReciprocal, { tcuInputSpeedSensorPin != 0 } + field = "Tooth Count", tcuInputSpeedSensorTeeth + +dialog = rangeMatrixInputPanel, "Range Selector Inputs" + field = "Input 1 Pin", tcu_rangeInput1, { tcuEnabled } + field = "Input 1 Pin Mode", tcu_rangeInputMode1, { tcuEnabled } + field = "Input 2 Pin", tcu_rangeInput2, { tcuEnabled } + field = "Input 2 Pin Mode", tcu_rangeInputMode2, { tcuEnabled } + field = "Input 3 Pin", tcu_rangeInput3, { tcuEnabled } + field = "Input 3 Pin Mode", tcu_rangeInputMode3, { tcuEnabled } + field = "Input 4 Pin", tcu_rangeInput4, { tcuEnabled } + field = "Input 4 Pin Mode", tcu_rangeInputMode4, { tcuEnabled } + +dialog = tcuControls, "Transmission Settings" + panel = transmissionPanel + panel = shiftSolenoidPanel + panel = otherSolenoidPanel + + dialog = gearControls, "Gear Selection Settings" + panel = buttonShiftInputPanel + panel = rangeMatrixInputPanel + + dialog = inputSpeedSensor, "Input Speed Sensor" + panel = inputSpeedSensorPanel + + dialog = tccCurves, "TCC Lock/Unlock Speed" + panel = tccLockCurve + + dialog = pcPerGearDialog, "Line Pressure Per Gear Steady State" + panel = pcPerGearCurve + + dialog = pcPerShiftDialog, "Line Pressure Per Shift" + panel = pcPerShiftCurve + + dialog = 32Dialog, "3-2 Shift Solenoid Percent by Speed" + panel = 32Curve + + dialog = rangeMatrixDocumentation, "Cell Values" + field = "0 = this pin must be low to reach this state" + field = "1 = this pin must be high to reach this state" + field = "2 = this pin is ignored for reaching this state" + field = "3 = this state is unreachable" + + dialog = rangeMatrixDialog, "Range Selector Input Matrix", border + panel = rangeMatrix, Center + panel = rangeMatrixDocumentation, South + +;Boost Open Loop + + dialog = boostDialog, "" + field = "Enable", isBoostControlEnabled + field = "Control Mode", boostType, { isBoostControlEnabled } + field = "Output", boostControlPin, { boostControlPin != 0 || isBoostControlEnabled } + field = "Output Mode", boostControlPinMode, { isBoostControlEnabled } + field = "Frequency", boostPwmFrequency, { isBoostControlEnabled } + field = "Safe duty cycle", boostControlSafeDutyCycle, { isBoostControlEnabled } + field = "No boost control below RPM", boostControlMinRpm, { isBoostControlEnabled } + field = "No boost control below TPS", boostControlMinTps, { isBoostControlEnabled } + field = "No boost control below MAP", boostControlMinMap, { isBoostControlEnabled } + + dialog = boostOpenLoopDialog, "", border + panel = boostTableTbl, Center + + dialog = boostOpenLoopGearAdderDialog, "", border + panel = boostOpenLoopGearAdderCurve, Center + +;Boost Closed Loop + + dialog = boostPidDialog, "" + topicHelp = "boostPidHelp" + field = "Enable closed loop above", minimumBoostClosedLoopMap, { isBoostControlEnabled && boostType == 1 } + field = "P Gain", boostPid_pFactor, { isBoostControlEnabled && boostType == 1 } + field = "I Gain", boostPid_iFactor, { isBoostControlEnabled && boostType == 1 } + field = "D Gain", boostPid_dFactor, { isBoostControlEnabled && boostType == 1 } + field = "Min adjustment", boostPid_minValue, { isBoostControlEnabled && boostType == 1 } + field = "Max adjustment", boostPid_maxValue, { isBoostControlEnabled && boostType == 1 } + + dialog = boostTargetDialog, "", card + panel = boostTable2Tbl + + dialog = boostEtbPid, "" + field = "This PID is controlling how DC motor reaches desired position" + field = "" + field = "!This section is for advanced users only!" + field = "H-Bridge #1 function", etbFunctions1 + field = "H-Bridge #2 function", etbFunctions2 + field = "P gain", etbWastegatePid_pFactor, { isBoostControlEnabled } + field = "I gain", etbWastegatePid_iFactor, { isBoostControlEnabled } + field = "D gain", etbWastegatePid_dFactor, { isBoostControlEnabled } + field = "PID min", etbWastegatePid_minValue, { isBoostControlEnabled } + field = "PID max", etbWastegatePid_maxValue, { isBoostControlEnabled } + + help = boostPidHelp, "Boost Control PID" + text = "P = % per kPa error" + text = "I = % per kPa-seconds" + text = "D = % per kPa/sec" + text = "" + text = "If the boost error is 5kpa, and your P is set to 2, it will make a correction of 10%." + text = "If the boost error has been 5kPa for 2 second (10 kPa-seconds) and I is set to 0.1, it will make a correction of 1%" + text = "If the boost is changing at 10kPa/s and D is set to 0.5, it will make a correction of 5%." + text = "Those three terms are then added together, and limited by the PID min/max settings." + text = "" + text = "That is then added to the value from the open loop table, and sent to PWM the valve." + + help = veTableDialogHelp, "Volumetric Efficiency" + text = "Volumetric Efficiency is used to calculate fuel in Speed Density mode. VE incorporates pressure ratio as measured by MAP sensor in boost (no VE ever above 105%ish)" + webHelp = "https://rusefi.com/s/fuel" + + help = stepperHbridgeHardwareHelp, "Stepper driven by Dual H-bridge" + text = "In case you are using two H-bridges driving 4-wire stepper. H-brigde control signals connected to MCU pins configured here." + + help = idleStepperHwHelp, "Stepper drivern by step motor driver IC" + text = "In case you have some special IC that drives your stepper. MCU to IC control signals (DIR/STEP/EN) configured here" + + help = stepperDirectDriveHardwareHelp, "Stepper driven by 4 Push-Pull/Pull outputs" + text = "In case you have 4/6-wire stepper driven by 4 ECU outputs in Push-Pull or Pull mode. Set ECU outputs used for each phase here." + + help = iatFuelCorrCurveHelp, "IAT Fuel Correction" + text = "Charge temperature estimation coefficient is the more proper way to handle IAT for fuel purposes" + text = "Open question who if anyone needs IAT Fuel Correction when" + + help = fuelHelp, "Fuel Control" + text = "More about fuel control on the web" + webHelp = "https://rusefi.com/s/fuel" + + help = triggerHelp, "Trigger Settings" + text = "More about Trigger Settings on the web" + webHelp = "https://rusefi.com/s/trigger" + + help = etbHelp, "ETB Control" + text = "More about electronic throttle body on the web" + webHelp = "https://rusefi.com/s/etb" + + help = vrThresholdHelp, "VR Sensor Threshold" + text = "This is about rusEFI VR Discrete decoder" + webHelp = "https://rusefi.com/" + + help = tpsTpsHelp, "Acceleration Enrichment" + text = "More about Tps To Tps acceleration on the web" + webHelp = "https://rusefi.com/s/tpstps" + + help = baseHelp, "Base Settings Control" + text = "More about rusefi on the web" + webHelp = "https://rusefi.com/" + + dialog = veTableDialog + topicHelp = "veTableDialogHelp" + panel = veTableTbl, South + + dialog = veTableDialog3D, "VE Table" + topicHelp = "veTableDialogHelp" + panel = veTableMap, South + + dialog = etbPidDialog, "PID settings" + field = "pFactor", etb_pFactor + field = "iFactor", etb_iFactor + field = "dFactor", etb_dFactor + field = "pid min", etb_minValue + field = "pid max", etb_maxValue + field = "iTermMin", etb_iTermMin + field = "iTermMax", etb_iTermMax + + dialog = etbIdleDialog, "ETB Idle" + field = "ETB idle maximum angle", etbIdleThrottleRange + + dialog = etbDialogLeft + field = "https://rusefi.com/s/etb" + field = "Disable ETB if engine is stopped", disableEtbWhenEngineStopped + field = "Disable ETB Motor", pauseEtbControl + field = "H-Bridge #1 function", etbFunctions1 + field = "H-Bridge #2 function", etbFunctions2 + field = "PWM Frequency", etbFreq + field = "Minimum ETB position", etbMinimumPosition + field = "Maximum ETB position", etbMaximumPosition + field = "Jam detection integrator max", etbJamIntegratorLimit + field = "Jam detection timeout period", etbJamTimeout + field = "Duty Averaging Length", etbExpAverageLength + field = "Rate of change Averaging Length", etbRocExpAverageLength + ; we need the term about stepper idle in here, because there's a bug in TS that you can't have different visibility + ; criteria for the same panel when used in multiple places + ; todo: report bug to TS? + ; another todo: split panel into two panels so that we can enable/disable h-bridge #1 separately from h-bridge #2 + + dialog = etbAutotune, "PID Autotune" + field = "First step: calibrate TPS and hit 'Burn'" + commandButton = "Auto Calibrate ETB 1", cmd_etb_auto_calibrate, {etb1configured == 1 && tps1_1AdcChannel != 0 && calibrationMode == 0} + commandButton = "Auto Calibrate ETB 2", cmd_etb_auto_calibrate_2, {etb2configured == 1 && tps2_1AdcChannel != 0 && calibrationMode == 0} + field = "Second step" + commandButton = "Start ETB PID Autotune", cmd_etb_autotune, {(etb1configured == 1 || etb2configured == 1) && calibrationMode = 0} + commandButton = "Stop ETB PID Autotune", cmd_etb_autotune_stop, {(etb1configured == 1 || etb2configured == 1) && calibrationMode >= 3 && calibrationMode <= 5} + + field = "!Set debug mode below to 'ETB Autotune' to show more detail" + field = "Debug mode", debugMode + + dialog = etbDialogRight + panel = etbIdleDialog,{ etbFunctions1 == 1 || etbFunctions1 == 2 || etbFunctions2 == 1 || etbFunctions2 == 2 } + commandButton = "Reset ETB", cmd_etb_reset + panel = etbPidDialog, { etbFunctions1 == 1 || etbFunctions1 == 2 || etbFunctions2 == 1 || etbFunctions2 == 2 } + panel = etbAutotune, { etbFunctions1 == 1 || etbFunctions1 == 2 || etbFunctions2 == 1 || etbFunctions2 == 2 } + + dialog = etbDialog, "Electronic Throttle Body", border + topicHelp = "etbHelp" + panel = etbDialogLeft, West + panel = etbDialogRight, East + + dialog = testSpark, "Spark" + commandButton = "Spark #1", cmd_test_spk1 + commandButton = "Spark #2", cmd_test_spk2, { cylindersCount >= 2 } + commandButton = "Spark #3", cmd_test_spk3, { cylindersCount >= 3 } + commandButton = "Spark #4", cmd_test_spk4, { cylindersCount >= 4 } + commandButton = "Spark #5", cmd_test_spk5, { cylindersCount >= 5 } + commandButton = "Spark #6", cmd_test_spk6, { cylindersCount >= 6 } + commandButton = "Spark #7", cmd_test_spk7, { cylindersCount >= 7 } + commandButton = "Spark #8", cmd_test_spk8, { cylindersCount >= 8 } + commandButton = "Spark #9", cmd_test_spk9, { cylindersCount >= 9 } + commandButton = "Spark #10", cmd_test_spk10, { cylindersCount >= 10 } + commandButton = "Spark #11", cmd_test_spk11, { cylindersCount >= 11 } + commandButton = "Spark #12", cmd_test_spk12, { cylindersCount >= 12 } + commandButton = "Abort test", cmd_test_cancel + + dialog = testMisc, "Misc" + commandButton = "A/C Relay", cmd_test_ac_relay + commandButton = "Idle Air Valve", cmd_test_idle_valve + commandButton = "Idle Second Air Valve", cmd_test_second_idle_valve + commandButton = "Stop Engine", cmd_stop_engine + commandButton = "Write Config", cmd_write_config + commandButton = "Reset ECU", cmd_reset_controller + commandButton = "Reset to DFU", cmd_dfu + commandButton = "Reset to OpenBLT", cmd_openblt + commandButton = "No flash Burn mode", cmd_burn_without_flash + + ; bench test + dialog = ioTest, "Bench Test & Commands", xAxis + panel = testSpark + panel = testInjectors + panel = testOther + panel = testLuaOut + panel = testMisc + + ; Injectors test + dialog = injTest_l, "Output test modes", yAxis + field = "Iterations", benchTestCount + field = "ON time", benchTestOffTime + field = "OFF time", benchTestOnTime + + dialog = injTest_r, "Reference gauges", yAxis + gauge = VBattGauge,North + gauge = testBenchIterGauge,South + + dialog = injTest, "", xAxis + panel = injTest_l + panel = injTest_r + + dialog = widebandConfig, "rusEFI Wideband Config" + field = "!Please connect exactly one wideband controller before pressing these buttons!" + commandButton = "Update Firmware", cmd_wideband_firmare_update + field = "!These buttons will set ALL connected controllers to the specified index." + field = "!Disconnect all controllers you don't want to set!" + commandButton = "Set Index 0", cmd_set_wideband_idx_0 + commandButton = "Set Index 1", cmd_set_wideband_idx_1 + field = "Wideband CAN bus", widebandOnSecondBus + field = "Force O2 sensor heating", forceO2Heating + + dialog = engineTypeDialog, "Popular vehicles" + field = "!These buttons send a command to rusEFI controller to apply preset values" + field = "!Once you send the command, please reconnect to rusEFI controller in order to read fresh values" + commandButton = "Frankenso Miata NA6 Stage 1", cmd_set_engine_type_Frankenso_Miata_NA6_MAP + commandButton = "Frankenso Miata NB2 MAP", cmd_set_engine_type_Frankenso_Miata_NB2 + +; commandButton = "Mitsubishi 3A92", cmd_set_engine_type_MITSUBISHI_3A92 +; commandButton = "Mitsubishi 4G93", cmd_set_engine_type_MITSUBISHI_4G93 + + + + commandButton = "Fuel Bench", cmd_set_engine_type_FUEL_BENCH + + + + + + + + + commandButton = "ETB test bench", cmd_set_engine_type_etb_test + commandButton = "TLE8888 test bench", cmd_set_engine_type_8888_test + commandButton = "Reset firmware settings", cmd_set_engine_type_default + +; Board->ECU stimulator + dialog = ecuStimulator, "ECU stimulator" + field = "Trigger Simulator", triggerSimulatorRpm + commandButton = "Enable internal trigger simulation", cmd_enable_self_stim + commandButton = "Enable external trigger simulation", cmd_enable_ext_stim + commandButton = "Disable trigger simulation", cmd_disable_self_stim +; field = "" +; field = "digipot spi", digitalPotentiometerSpiDevice +; field = "digipot CS #0", digitalPotentiometerChipSelect1 +; field = "digipot CS #1", digitalPotentiometerChipSelect2 +; field = "digipot CS #2", digitalPotentiometerChipSelect3 +; field = "digipot CS #3", digitalPotentiometerChipSelect4 + field = "" + field = "trigger stimulator output #1", triggerSimulatorPins1 + field = "trigger stimulator output mode #1", triggerSimulatorPinModes1 + field = "trigger stimulator output #2", triggerSimulatorPins2 + field = "trigger stimulator output mode #2", triggerSimulatorPinModes2 + field = "" + field = "Logic input channel 1", logicAnalyzerPins1 + field = "Logic input channel 2", logicAnalyzerPins2 + field = "Logic input channel 3", logicAnalyzerPins3 + field = "Logic input channel 4", logicAnalyzerPins4 + field = "" + field = "Engine chart size", engineChartSize + + ; Racing Features->Launch Control + dialog = smLaunchControlWest, "Launch Control Settings" + field = "Enable Launch Control", launchControlEnabled + field = "Activation Mode", launchActivationMode + + field = "Launch Button", launchActivatePin, { launchActivatePin != 0 || (launchActivationMode == 0 && launchControlEnabled == 1)} + field = "Launch Button inverted", launchActivateInverted + field = "Launch Button mode", launchActivatePinMode, {launchActivationMode == 0 && launchControlEnabled == 1} + + field = "Clutch Down", clutchDownPin, {launchActivationMode == 1 && launchControlEnabled == 1} + field = "Clutch Down inverted", clutchDownPinInverted + field = "Clutch Down mode", clutchDownPinMode, {launchActivationMode == 1 && launchControlEnabled == 1} + field = "" + +; dead code field = "Rpm Threshold", launchRpmThreshold, {launchControlEnabled == 1} + field = "Speed Threshold", launchSpeedThreshold, {launchControlEnabled == 1} + field = "" + field = "Launch RPM", launchRpm, {launchControlEnabled == 1} + field = "Ignition Retard Adder", launchTimingRpmRange, {launchControlEnabled == 1 && enableLaunchRetard == 1} + field = "Hard Cut RPM Adder", hardCutRpmRange, {launchControlEnabled == 1} + ;field = "Extra Fuel", launchFuelAdded, {launchControlEnabled == 1} + ;field = "Boost Solenoid Duty", launchBoostDuty, {launchControlEnabled == 1} + field = "TPS Threshold", launchTpsThreshold, {launchControlEnabled == 1} + field = "Ignition Retard enable", enableLaunchRetard, {launchControlEnabled == 1} + field = "Ignition Retard", launchTimingRetard, {launchControlEnabled == 1 && enableLaunchRetard == 1} + field = "Fuel Added %", launchFuelAdderPercent, {launchControlEnabled == 1} + field = "Smooth Retard Mode", launchSmoothRetard, {launchControlEnabled == 1 && enableLaunchRetard == 1} + field = "Hard Cut Mode" + field = "Ignition Cut", launchSparkCutEnable, {launchControlEnabled == 1} + field = "Fuel Cut", launchFuelCutEnable, {launchControlEnabled == 1} + + + dialog = smLaunchControl, "", border + panel = smLaunchControlWest, West + panel = launch_control_stateDialog, East + + dialog = antiLagDialog, "AntiLag Settings" + field = "Enable AntiLag", antiLagEnabled + field = "Activation Mode", antiLagActivationMode + field = "Switch Input", ALSActivatePin, {antiLagActivationMode == 0 && antiLagEnabled == 1} + field = "ALS Button inverted", ALSActivateInverted, {antiLagActivationMode == 0 && antiLagEnabled == 1} + field = "ALS Button mode", ALSActivatePinMode, {antiLagActivationMode == 0 && antiLagEnabled == 1} + field = "ALS timeout", ALSMaxDuration, {antiLagEnabled == 1} + field = "Max TPS", ALSMaxTPS, {antiLagEnabled == 1} + field = "Min RPM", ALSMinRPM, {antiLagEnabled == 1} + field = "Max RPM", ALSMaxRPM, {antiLagEnabled == 1} + field = "Min CLT", ALSMinCLT, {antiLagEnabled == 1} + field = "Max CLT", ALSMaxCLT, {antiLagEnabled == 1} + field = "Idle Air Add", ALSIdleAdd, {antiLagEnabled == 1} + field = "ETB Air Add", ALSEtbAdd, {antiLagEnabled == 1} + panel = FuelAdderTableALS + panel = IgnRetardTableALS + panel = IgnSkipTableALS + + + dialog = coastingFuelCutControl, "Coasting Fuel Cutoff Settings" + field = "Enable Coasting Fuel Cutoff", coastingFuelCutEnabled + field = "No cut below CLT", coastingFuelCutClt, {coastingFuelCutEnabled == 1} + field = "RPM cut fuel above", coastingFuelCutRpmHigh, {coastingFuelCutEnabled == 1} + field = "RPM restore fuel below", coastingFuelCutRpmLow, {coastingFuelCutEnabled == 1} + field = "Vehicle speed cut above", coastingFuelCutVssHigh, {coastingFuelCutEnabled == 1} + field = "Vehicle speed restore below", coastingFuelCutVssLow, {coastingFuelCutEnabled == 1} + field = "Cut fuel below TPS", coastingFuelCutTps, {coastingFuelCutEnabled == 1} + field = "Cut fuel below MAP", coastingFuelCutMap, {coastingFuelCutEnabled == 1} + field = "Fuel cut delay", dfcoDelay, {coastingFuelCutEnabled == 1} + field = "Inhibit closed loop fuel after cut", noFuelTrimAfterDfcoTime, {coastingFuelCutEnabled == 1} + + dialog = rotaryDialog, "Rotary" + field = "Enable Trailing Sparks", enableTrailingSparks + field = "Trailing Spark Offset", trailingSparkAngle + field = "Trailing Pin 1", trailingCoilPins1 + field = "Trailing Pin 2", trailingCoilPins2 + field = "Trailing Pin 3", trailingCoilPins3 + field = "Trailing Pin 4", trailingCoilPins4 + + dialog = fancyHardwareDialog, "Fancy Boards" + field = "etbDutyThreshold", etbDutyThreshold + field = "etbDutyShutdownThreshold", etbDutyShutdownThreshold + + dialog = parkingLot2, "Experimental 2" + field = dacOutputPins1, dacOutputPins1 + field = dacOutputPins2, dacOutputPins2 + + dialog = harleyAcr, "Harley Automatic Compression Release" + field = "Pin", acrPin + field = "Pin 2", acrPin2 + field = "cutFuelInAcr", cutFuelInAcr + field = "oddFireEngine", oddFireEngine + field = "#ACR is disabled after the specified number" + field = "#of revolutions, plus degrees of engine phase" + field = "Disable after revolutions", acrRevolutions + field = "Disable after engine phase", acrDisablePhase + commandButton = "ACR #1", cmd_test_acr_valve + commandButton = "ACR #2", cmd_test_acr2_valve + indicator = { acrActive }, "ACR off", "ACR on", white, black, green, black + + dialog = kLineDialog, "K Line" + field = kLineBaudRate, kLineBaudRate + field = verboseKLine, verboseKLine + field = hondaK, hondaK + field = kLineDoHondaSend, kLineDoHondaSend + field = kLinePeriodUs, kLinePeriodUs + + dialog = parkingLot, "Experimental/Broken" +; field = uiMode, uiMode + field = auxiliarySetting1, auxiliarySetting1 + field = can1ListenMode, can1ListenMode + field = can2ListenMode, can2ListenMode + field = rethrowHardFault, rethrowHardFault + field = canGpioType, canGpioType + field = "I understand ECU Locking", yesUnderstandLocking + field = "! Use console for unlocking" + field = "Tune read/write password", tuneHidingKey, { yesUnderstandLocking == 1 } + field = verboseQuad, verboseQuad +; field = useEeprom, useEeprom + field = "#System hacks" + field = "vvtBooleanForVerySpecialCases", vvtBooleanForVerySpecialCases + field = watchOutForLinearTime, watchOutForLinearTime + field = "Global fuel correction", globalFuelCorrection + field = "TS over CAN debug", verboseIsoTp + field = "MAP Averaging Logic @", mapAveragingSchedulingAtIndex + field = "showHumanReadableWarning (affects Burn)", showHumanReadableWarning + field = "Warning Message", warning_message + field = "Ford/Toyota redundant TPS mode", useFordRedundantTps + field = "Secondary TPS maximum", tpsSecondaryMaximum, {useFordRedundantTps} + field = "Ford/Toyota redundant PPS mode", useFordRedundantPps + field = "Secondary PPS maximum", ppsSecondaryMaximum, {useFordRedundantPps} + + field = "consumeObdSensors", consumeObdSensors, { canReadEnabled == 1 && canWriteEnabled == 1} + field = "BRZ/FRS/GT86 pedal", allowIdenticalPps + field = "Artificial Misfire", artificialTestMisfire + field = "Always use instant RPM", alwaysInstantRpm + field = vinNumber, vinNumber + field = turbochargerFilter, turbochargerFilter + field = auxFrequencyFilter, auxFrequencyFilter + field = useBiQuadOnAuxSpeedSensors, useBiQuadOnAuxSpeedSensors + field = "TODO KS mode 4569", kickStartCranking + panel = allTriggerDebug + panel = torqueTableTbl + + help = helpGeneral, "rusEFI General Help" + webHelp = "http://www.rusefi.com/" + text = "" + + dialog = vrThreshold1, "VR 1 Threshold" + field = "Pin", vrThreshold1_pin + panel = vrThresholdCurve1 + + dialog = vrThreshold2, "VR 2 Threshold" + field = "Pin", vrThreshold2_pin + panel = vrThresholdCurve2 + + dialog = vrThreshold + topicHelp = "vrThresholdHelp" + panel = vrThreshold1 + panel = vrThreshold2 + + dialog = gppwm1left, "" + field = "Output", gppwm1_pin + field = "" + field = "Set frequency to 0hz for on-off mode" + field = "Frequency", gppwm1_pwmFrequency, {gppwm1_pin != 0} + field = "" + field = "On above duty", gppwm1_onAboveDuty, {gppwm1_pin != 0 && gppwm1_pwmFrequency == 0} + field = "Off below duty", gppwm1_offBelowDuty, {gppwm1_pin != 0 && gppwm1_pwmFrequency == 0} + field = "Duty if error", gppwm1_dutyIfError, {gppwm1_pin != 0} + field = "" + field = "X Axis", gppwm1_rpmAxis, {gppwm1_pin != 0} + field = "Y Axis", gppwm1_loadAxis, {gppwm1_pin != 0} + field = "Note", gpPwmNote1 + field = "" + field = "" + field = "" + field = "" + field = "" + + dialog = gppwm1, "General Purpose PWM 1", xAxis + panel = gppwm1left + panel = gppwm1Tbl, {gppwm1_pin != 0} + + dialog = gppwm2left, "" + field = "Output", gppwm2_pin + field = "" + field = "Set frequency to 0hz for on-off mode" + field = "Frequency", gppwm2_pwmFrequency, {gppwm2_pin != 0} + field = "" + field = "On above duty", gppwm2_onAboveDuty, {gppwm2_pin != 0 && gppwm2_pwmFrequency == 0} + field = "Off below duty", gppwm2_offBelowDuty, {gppwm2_pin != 0 && gppwm2_pwmFrequency == 0} + field = "Duty if error", gppwm2_dutyIfError, {gppwm2_pin != 0} + field = "" + field = "X Axis", gppwm2_rpmAxis, {gppwm2_pin != 0} + field = "Y Axis", gppwm2_loadAxis, {gppwm2_pin != 0} + field = "Note", gpPwmNote2 + field = "" + field = "" + field = "" + field = "" + field = "" + + dialog = gppwm2, "General Purpose PWM 2", xAxis + panel = gppwm2left + panel = gppwm2Tbl, {gppwm2_pin != 0} + + dialog = gppwm3left, "" + field = "Output", gppwm3_pin + field = "" + field = "Set frequency to 0hz for on-off mode" + field = "Frequency", gppwm3_pwmFrequency, {gppwm3_pin != 0} + field = "" + field = "On above duty", gppwm3_onAboveDuty, {gppwm3_pin != 0 && gppwm3_pwmFrequency == 0} + field = "Off below duty", gppwm3_offBelowDuty, {gppwm3_pin != 0 && gppwm3_pwmFrequency == 0} + field = "Duty if error", gppwm3_dutyIfError, {gppwm3_pin != 0} + field = "" + field = "X Axis", gppwm3_rpmAxis, {gppwm3_pin != 0} + field = "Y Axis", gppwm3_loadAxis, {gppwm3_pin != 0} + field = "Note", gpPwmNote3 + field = "" + field = "" + field = "" + field = "" + field = "" + + dialog = gppwm3, "General Purpose PWM 3", xAxis + panel = gppwm3left + panel = gppwm3Tbl, {gppwm3_pin != 0} + + dialog = gppwm4left, "" + field = "Output", gppwm4_pin + field = "" + field = "Set frequency to 0hz for on-off mode" + field = "Frequency", gppwm4_pwmFrequency, {gppwm4_pin != 0} + field = "" + field = "On above duty", gppwm4_onAboveDuty, {gppwm4_pin != 0 && gppwm4_pwmFrequency == 0} + field = "Off below duty", gppwm4_offBelowDuty, {gppwm4_pin != 0 && gppwm4_pwmFrequency == 0} + field = "Duty if error", gppwm4_dutyIfError, {gppwm4_pin != 0} + field = "" + field = "X Axis", gppwm4_rpmAxis, {gppwm4_pin != 0} + field = "Y Axis", gppwm4_loadAxis, {gppwm4_pin != 0} + field = "Note", gpPwmNote4 + field = "" + field = "" + field = "" + field = "" + field = "" + + dialog = gppwm4, "General Purpose PWM 4", xAxis + panel = gppwm4left + panel = gppwm4Tbl, {gppwm4_pin != 0} + + dialog = hpfpCamDialog, "HPFP Cam Configuration" + field = "Number of lobes", hpfpCamLobes + field = "If using VVT, which cam the pump is driven from", hpfpCam, {hpfpCamLobes != 0} + field = "Angle of first lobe", hpfpPeakPos, {hpfpCamLobes != 0} + panel = hpfpLobeProfileCurve, {hpfpCamLobes != 0} + + dialog = hpfpPumpDialog, "HPFP Pump Configuration" + field = "Valve Pin", hpfpValvePin, {hpfpCamLobes != 0} + field = "Valve Pin Mode", hpfpValvePinMode, {hpfpCamLobes != 0} + commandButton = "HPFP Valve", cmd_test_hpfp_valve + field = "Valve peak current", mc33_hpfp_i_peak, {hpfpCamLobes != 0} + field = "Valve hold current", mc33_hpfp_i_hold, {hpfpCamLobes != 0} + field = "Valve hold off time", mc33_hpfp_i_hold_off, {hpfpCamLobes != 0} + field = "Valve maximum duration", mc33_hpfp_max_hold, {hpfpCamLobes != 0} + field = "Pump volume", hpfpPumpVolume, {hpfpCamLobes != 0} + field = "Minimum angle", hpfpMinAngle, {hpfpCamLobes != 0} + field = "Activation angle", hpfpActivationAngle, {hpfpCamLobes != 0} + field = "Target decay rate", hpfpTargetDecay, {hpfpCamLobes != 0} + field = "Proportional gain", hpfpPidP, {hpfpCamLobes != 0} + field = "Integral gain", hpfpPidI, {hpfpCamLobes != 0} + panel = hpfpDeadtimeCurve, {hpfpCamLobes != 0} + +[Tools] + ;addTool = toolName, PanelName + addTool = veTableGenerator, "VE Table Generator", veTableTbl +#if LAMBDA +#else + addTool = afrTableGenerator, "AFR Table Generator", afrTableTbl +#endif diff --git a/generated/rusefi_generated.h b/generated/rusefi_generated.h new file mode 100644 index 0000000..68e644d --- /dev/null +++ b/generated/rusefi_generated.h @@ -0,0 +1,1521 @@ +// +// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh integration/rusefi_config.txt +// + +#define adc_channel_e_auto_enum 0="EFI_ADC_NONE",1="EFI_ADC_0",2="EFI_ADC_1",11="EFI_ADC_10",12="EFI_ADC_11",13="EFI_ADC_12",14="EFI_ADC_13",15="EFI_ADC_14",16="EFI_ADC_15",17="EFI_ADC_16",18="EFI_ADC_17",19="EFI_ADC_18",20="EFI_ADC_19",3="EFI_ADC_2",21="EFI_ADC_20",22="EFI_ADC_21",23="EFI_ADC_22",24="EFI_ADC_23",25="EFI_ADC_24",26="EFI_ADC_25",27="EFI_ADC_26",28="EFI_ADC_27",29="EFI_ADC_28",30="EFI_ADC_29",4="EFI_ADC_3",31="EFI_ADC_30",32="EFI_ADC_31",5="EFI_ADC_4",6="EFI_ADC_5",7="EFI_ADC_6",8="EFI_ADC_7",9="EFI_ADC_8",10="EFI_ADC_9",50="EFI_ADC_ERROR",33="EFI_ADC_LAST_CHANNEL" +#define adc_channel_e_EFI_ADC_0 1 +#define adc_channel_e_EFI_ADC_1 2 +#define adc_channel_e_EFI_ADC_10 11 +#define adc_channel_e_EFI_ADC_11 12 +#define adc_channel_e_EFI_ADC_12 13 +#define adc_channel_e_EFI_ADC_13 14 +#define adc_channel_e_EFI_ADC_14 15 +#define adc_channel_e_EFI_ADC_15 16 +#define adc_channel_e_EFI_ADC_16 17 +#define adc_channel_e_EFI_ADC_17 18 +#define adc_channel_e_EFI_ADC_18 19 +#define adc_channel_e_EFI_ADC_19 20 +#define adc_channel_e_EFI_ADC_2 3 +#define adc_channel_e_EFI_ADC_20 21 +#define adc_channel_e_EFI_ADC_21 22 +#define adc_channel_e_EFI_ADC_22 23 +#define adc_channel_e_EFI_ADC_23 24 +#define adc_channel_e_EFI_ADC_24 25 +#define adc_channel_e_EFI_ADC_25 26 +#define adc_channel_e_EFI_ADC_26 27 +#define adc_channel_e_EFI_ADC_27 28 +#define adc_channel_e_EFI_ADC_28 29 +#define adc_channel_e_EFI_ADC_29 30 +#define adc_channel_e_EFI_ADC_3 4 +#define adc_channel_e_EFI_ADC_30 31 +#define adc_channel_e_EFI_ADC_31 32 +#define adc_channel_e_EFI_ADC_4 5 +#define adc_channel_e_EFI_ADC_5 6 +#define adc_channel_e_EFI_ADC_6 7 +#define adc_channel_e_EFI_ADC_7 8 +#define adc_channel_e_EFI_ADC_8 9 +#define adc_channel_e_EFI_ADC_9 10 +#define adc_channel_e_EFI_ADC_ERROR 50 +#define adc_channel_e_EFI_ADC_LAST_CHANNEL 33 +#define adc_channel_e_EFI_ADC_NONE 0 +#define adc_channel_e_enum "Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" +#define adc_channel_e_fullenum "Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" +#define ADC_CHANNEL_NONE 0 +#define afr_sensor_s_size 20 +#define AFTERSTART_DECAY_CURVE_SIZE 8 +#define AFTERSTART_ENRICH_CURVE_SIZE 8 +#define AFTERSTART_HOLD_CURVE_SIZE 8 +#define air_pressure_sensor_config_s_size 12 +#define air_pressure_sensor_type_e_auto_enum 0="MT_CUSTOM",10="MT_BOSCH_2_5",1="MT_DENSO183",4="MT_DODGE_NEON_2003",13="MT_GM_1_BAR",12="MT_GM_2_BAR",6="MT_GM_3_BAR",3="MT_HONDA3BAR",11="MT_MAZDA_1_BAR",7="MT_MPX4100",2="MT_MPX4250",9="MT_MPX4250A",15="MT_MPXH6300",14="MT_MPXH6400",5="MT_SUBY_DENSO",8="MT_TOYOTA_89420_02010" +#define air_pressure_sensor_type_e_MT_BOSCH_2_5 10 +#define air_pressure_sensor_type_e_MT_CUSTOM 0 +#define air_pressure_sensor_type_e_MT_DENSO183 1 +#define air_pressure_sensor_type_e_MT_DODGE_NEON_2003 4 +#define air_pressure_sensor_type_e_MT_GM_1_BAR 13 +#define air_pressure_sensor_type_e_MT_GM_2_BAR 12 +#define air_pressure_sensor_type_e_MT_GM_3_BAR 6 +#define air_pressure_sensor_type_e_MT_HONDA3BAR 3 +#define air_pressure_sensor_type_e_MT_MAZDA_1_BAR 11 +#define air_pressure_sensor_type_e_MT_MPX4100 7 +#define air_pressure_sensor_type_e_MT_MPX4250 2 +#define air_pressure_sensor_type_e_MT_MPX4250A 9 +#define air_pressure_sensor_type_e_MT_MPXH6300 15 +#define air_pressure_sensor_type_e_MT_MPXH6400 14 +#define air_pressure_sensor_type_e_MT_SUBY_DENSO 5 +#define air_pressure_sensor_type_e_MT_TOYOTA_89420_02010 8 +#define antiLagActivationMode_e_ALWAYS_ON_ANTILAG 1 +#define antiLagActivationMode_e_auto_enum 0="SWITCH_INPUT_ANTILAG",1="ALWAYS_ON_ANTILAG" +#define antiLagActivationMode_e_enum "Switch Input", "Always Active" +#define antiLagActivationMode_e_SWITCH_INPUT_ANTILAG 0 +#define AUX_DIGITAL_VALVE_COUNT 2 +#define AUX_SPEED_SENSOR_COUNT 2 +#define BANKS_COUNT 2 +#define BARO_CORR_SIZE 4 +#define BENCH_AC_RELAY_DURATION 800 +#define BENCH_FAN_DURATION 2000 +#define BENCH_FUEL_PUMP_DURATION 3000 +#define BENCH_MAIN_RELAY_DURATION 1000 +#define bench_mode_e_BENCH_AC_COMPRESSOR_RELAY 6 +#define bench_mode_e_BENCH_AUXOUT0 20 +#define bench_mode_e_BENCH_AUXOUT1 21 +#define bench_mode_e_BENCH_AUXOUT2 22 +#define bench_mode_e_BENCH_AUXOUT3 23 +#define bench_mode_e_BENCH_AUXOUT4 24 +#define bench_mode_e_BENCH_AUXOUT5 25 +#define bench_mode_e_BENCH_AUXOUT6 26 +#define bench_mode_e_BENCH_AUXOUT7 27 +#define bench_mode_e_BENCH_CANCEL 15 +#define bench_mode_e_BENCH_CHECK_ENGINE_LIGHT 7 +#define bench_mode_e_BENCH_FAN_RELAY 4 +#define bench_mode_e_BENCH_FAN_RELAY_2 5 +#define bench_mode_e_BENCH_FUEL_PUMP 1 +#define bench_mode_e_BENCH_GPPWM1_VALVE 10 +#define bench_mode_e_BENCH_GPPWM2_VALVE 11 +#define bench_mode_e_BENCH_GPPWM3_VALVE 12 +#define bench_mode_e_BENCH_GPPWM4_VALVE 13 +#define bench_mode_e_BENCH_HPFP_VALVE 9 +#define bench_mode_e_BENCH_IDLE_VALVE 8 +#define bench_mode_e_BENCH_MAIN_RELAY 0 +#define bench_mode_e_BENCH_SECOND_IDLE_VALVE 14 +#define bench_mode_e_BENCH_STARTER_DISABLE_RELAY 3 +#define bench_mode_e_BENCH_STARTER_ENABLE_RELAY 2 +#define bench_mode_e_BENCH_VVT0_VALVE 16 +#define bench_mode_e_BENCH_VVT1_VALVE 17 +#define bench_mode_e_BENCH_VVT2_VALVE 18 +#define bench_mode_e_BENCH_VVT3_VALVE 19 +#define bench_mode_e_HD_ACR 28 +#define bench_mode_e_HD_ACR2 29 +#define BENCH_STARTER_DURATION 4000 +#define BENCH_VVT_DURATION 300 +#define blend_table_s_size 188 +#define BLOCKING_FACTOR 750 +#define BOOST_BLEND_COUNT 2 +#define BOOST_LOAD_COUNT 8 +#define BOOST_RPM_COUNT 8 +#define boostType_e_auto_enum 0="OPEN_LOOP",1="CLOSED_LOOP" +#define boostType_e_CLOSED_LOOP 1 +#define boostType_e_OPEN_LOOP 0 +#define brain_input_pin_e_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define brain_input_pin_e_fullenum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define brain_pin_diag_e_PIN_DRIVER_OFF 0x20 +#define brain_pin_diag_e_PIN_DRIVER_OVERTEMP 0x10 +#define brain_pin_diag_e_PIN_INVALID 0x80 +#define brain_pin_diag_e_PIN_OK 0 +#define brain_pin_diag_e_PIN_OPEN 0x01 +#define brain_pin_diag_e_PIN_OVERLOAD 0x08 +#define brain_pin_diag_e_PIN_SHORT_TO_BAT 0x04 +#define brain_pin_diag_e_PIN_SHORT_TO_GND 0x02 +#define C_MC33810_COUNT 1 +#define CAM_INPUTS_COUNT 4 +#define CAMS_PER_BANK 2 +#define can_baudrate_e_auto_enum 0="B50KBPS",2="B100KBPS",3="B125KBPS",6="B1MBPS",4="B250KBPS",5="B500KBPS",1="B83KBPS" +#define can_baudrate_e_B100KBPS 2 +#define can_baudrate_e_B125KBPS 3 +#define can_baudrate_e_B1MBPS 6 +#define can_baudrate_e_B250KBPS 4 +#define can_baudrate_e_B500KBPS 5 +#define can_baudrate_e_B50KBPS 0 +#define can_baudrate_e_B83KBPS 1 +#define can_baudrate_e_enum "50kbps", "83.33kbps", "100kbps", "125kbps", "250kbps", "500kbps", "1Mbps" +#define CAN_BENCH_HEADER2 0x66 +#define CAN_DEFAULT_BASE 0x200 +#define CAN_ECU_SERIAL_RX_ID 0x100 +#define CAN_ECU_SERIAL_TX_ID 0x102 +#define can_nbc_e_auto_enum 0="CAN_BUS_NBC_NONE",12="CAN_AIM_DASH",4="CAN_BUS_BMW_E46",6="CAN_BUS_BMW_E90",10="CAN_BUS_GENESIS_COUPE",11="CAN_BUS_HONDA_K",7="CAN_BUS_Haltech",3="CAN_BUS_MAZDA_RX8",8="CAN_BUS_MQB",13="CAN_BUS_MS_SIMPLE_BROADCAST",1="CAN_BUS_NBC_FIAT",2="CAN_BUS_NBC_VAG",9="CAN_BUS_NISSAN_VQ",5="CAN_BUS_W202_C180" +#define can_nbc_e_CAN_AIM_DASH 12 +#define can_nbc_e_CAN_BUS_BMW_E46 4 +#define can_nbc_e_CAN_BUS_BMW_E90 6 +#define can_nbc_e_CAN_BUS_GENESIS_COUPE 10 +#define can_nbc_e_CAN_BUS_Haltech 7 +#define can_nbc_e_CAN_BUS_HONDA_K 11 +#define can_nbc_e_CAN_BUS_MAZDA_RX8 3 +#define can_nbc_e_CAN_BUS_MQB 8 +#define can_nbc_e_CAN_BUS_MS_SIMPLE_BROADCAST 13 +#define can_nbc_e_CAN_BUS_NBC_FIAT 1 +#define can_nbc_e_CAN_BUS_NBC_NONE 0 +#define can_nbc_e_CAN_BUS_NBC_VAG 2 +#define can_nbc_e_CAN_BUS_NISSAN_VQ 9 +#define can_nbc_e_CAN_BUS_W202_C180 5 +#define CAN_RX_PREFIX "CAN_rx" +#define can_vss_nbc_e_auto_enum 0="BMW_e46",3="BMW_e90",2="LUA",1="W202" +#define can_vss_nbc_e_BMW_e46 0 +#define can_vss_nbc_e_BMW_e90 3 +#define can_vss_nbc_e_LUA 2 +#define can_vss_nbc_e_W202 1 +#define CanGpioType_auto_enum 0="NONE",1="DRT",2="MS" +#define CanGpioType_DRT 1 +#define CanGpioType_enum "None", "DRT protocol", "MS protocol" +#define CanGpioType_MS 2 +#define CanGpioType_NONE 0 +#define CLT_CRANKING_CURVE_SIZE 8 +#define CLT_CURVE_SIZE 16 +#define CLT_LIMITER_CURVE_SIZE 4 +#define CLT_TIMING_CURVE_SIZE 8 +#define CMD_AC_RELAY_BENCH "acrelaybench" +#define CMD_ALTERNATOR_PIN "set_alternator_pin" +#define CMD_BOOST_PIN "set_boost_pin" +#define CMD_BURNCONFIG "burnconfig" +#define CMD_DATE "date" +#define CMD_DISABLE "disable" +#define CMD_ECU_UNLOCK "unlock" +#define CMD_ENABLE "enable" +#define CMD_ENGINE_TYPE "engine_type" +#define CMD_ENGINESNIFFERRPMTHRESHOLD "engineSnifferRpmThreshold" +#define CMD_ETB_DUTY "set_etb_duty" +#define CMD_EXTERNAL_STIMULATION "ext_stimulation" +#define CMD_FAN2_BENCH "fan2bench" +#define CMD_FAN_BENCH "fanbench" +#define CMD_FUEL_BENCH "fuelbench" +#define CMD_FUEL_PUMP_BENCH "fuelpumpbench" +#define CMD_FUNCTIONAL_TEST_MODE "test_mode" +#define CMD_GET "get" +#define CMD_HPFP_BENCH "hpfpbench" +#define CMD_IDLE_BENCH "idlebench" +#define CMD_IDLE_PIN "set_idle_pin" +#define CMD_IGNITION "ignition" +#define CMD_IGNITION_PIN "set_ignition_pin" +#define CMD_INDIVIDUAL_INJECTION "set_individual_coils_ignition" +#define CMD_INJECTION "injection" +#define CMD_INJECTION_PIN "set_injection_pin" +#define CMD_LOGIC_PIN "set_logic_input_pin" +#define CMD_MIL_BENCH "milbench" +#define CMD_PINS "pins" +#define CMD_PWM "pwm" +#define CMD_REBOOT "reboot" +#define CMD_REBOOT_DFU "reboot_dfu" +#define CMD_REBOOT_OPENBLT "reboot_openblt" +#define CMD_RESET_ENGINE_SNIFFER "reset_engine_chart" +#define CMD_RESET_SENSOR_MOCKS "reset_sensor_mocks" +#define CMD_RESET_SIMULATOR "reset_simulator" +#define CMD_RPM "rpm" +#define CMD_SELF_STIMULATION "self_stimulation" +#define CMD_SET "set" +#define CMD_SET_SENSOR_MOCK "set_sensor_mock" +#define CMD_SPARK_BENCH "sparkbench" +#define CMD_STARTER_BENCH "starterbench" +#define CMD_TRIGGER_HW_INPUT "trigger_hw_input" +#define CMD_TRIGGER_PIN "set_trigger_input_pin" +#define CMD_TRIGGER_SIMULATOR_PIN "set_trigger_simulator_pin" +#define CMD_TRIGGERINFO "triggerinfo" +#define CMD_VSS_PIN "vss_pin" +#define CMD_WRITECONFIG "writeconfig" +#define COMPOSITE_PACKET_SIZE 5 +#define CONSOLE_DATA_PROTOCOL_TAG " @" +#define CRANKING_ADVANCE_CURVE_SIZE 4 +#define CRANKING_CLT_IDLE_CURVE_SIZE 8 +#define CRANKING_CURVE_SIZE 8 +#define CRANKING_ENRICH_COUNT 6 +#define cranking_parameters_s_size 8 +#define CRITICAL_BUFFER_SIZE 120 +#define CRITICAL_PREFIX "CRITICAL" +#define cyl_trim_s_size 16 +#define DAC_OUTPUT_COUNT 2 +#define dc_function_e_auto_enum 0="DC_None",3="DC_IdleValve",1="DC_Throttle1",2="DC_Throttle2",4="DC_Wastegate" +#define dc_function_e_DC_IdleValve 3 +#define dc_function_e_DC_None 0 +#define dc_function_e_DC_Throttle1 1 +#define dc_function_e_DC_Throttle2 2 +#define dc_function_e_DC_Wastegate 4 +#define dc_io_size 8 +#define DC_PER_STEPPER 2 +#define debug_mode_e_auto_enum 0="DBG_0",10="DBG_10",11="DBG_11",12="DBG_12",13="DBG_13",16="DBG_16",19="DBG_19",2="DBG_2",20="DBG_20",21="DBG_21",22="DBG_22",24="DBG_24",25="DBG_25",26="DBG_26",29="DBG_29",32="DBG_32",34="DBG_34",35="DBG_35",36="DBG_36",37="DBG_37",38="DBG_38",43="DBG_43",46="DBG_46",5="DBG_5",6="DBG_6",7="DBG_7",8="DBG_8",9="DBG_9",40="DBG_COMPOSITE_LOG",33="DBG_DWELL_METRIC",44="DBG_DYNO_VIEW",17="DBG_ELECTRONIC_THROTTLE_PID",4="DBG_EL_ACCEL",39="DBG_ETB_AUTOTUNE",18="DBG_EXECUTOR",30="DBG_ION",15="DBG_KNOCK",45="DBG_LOGIC_ANALYZER",48="DBG_LUA",27="DBG_MAP",28="DBG_METRICS",14="DBG_SR5_PROTOCOL",3="DBG_STEPPER_IDLE_CONTROL",47="DBG_TCU",31="DBG_TLE8888",1="DBG_TPS_ACCEL",41="DBG_UNUSED41",42="DBG_UNUSED_42",23="UNUSED23" +#define debug_mode_e_DBG_0 0 +#define debug_mode_e_DBG_10 10 +#define debug_mode_e_DBG_11 11 +#define debug_mode_e_DBG_12 12 +#define debug_mode_e_DBG_13 13 +#define debug_mode_e_DBG_16 16 +#define debug_mode_e_DBG_19 19 +#define debug_mode_e_DBG_2 2 +#define debug_mode_e_DBG_20 20 +#define debug_mode_e_DBG_21 21 +#define debug_mode_e_DBG_22 22 +#define debug_mode_e_DBG_24 24 +#define debug_mode_e_DBG_25 25 +#define debug_mode_e_DBG_26 26 +#define debug_mode_e_DBG_29 29 +#define debug_mode_e_DBG_32 32 +#define debug_mode_e_DBG_34 34 +#define debug_mode_e_DBG_35 35 +#define debug_mode_e_DBG_36 36 +#define debug_mode_e_DBG_37 37 +#define debug_mode_e_DBG_38 38 +#define debug_mode_e_DBG_43 43 +#define debug_mode_e_DBG_46 46 +#define debug_mode_e_DBG_5 5 +#define debug_mode_e_DBG_6 6 +#define debug_mode_e_DBG_7 7 +#define debug_mode_e_DBG_8 8 +#define debug_mode_e_DBG_9 9 +#define debug_mode_e_DBG_COMPOSITE_LOG 40 +#define debug_mode_e_DBG_DWELL_METRIC 33 +#define debug_mode_e_DBG_DYNO_VIEW 44 +#define debug_mode_e_DBG_EL_ACCEL 4 +#define debug_mode_e_DBG_ELECTRONIC_THROTTLE_PID 17 +#define debug_mode_e_DBG_ETB_AUTOTUNE 39 +#define debug_mode_e_DBG_EXECUTOR 18 +#define debug_mode_e_DBG_ION 30 +#define debug_mode_e_DBG_KNOCK 15 +#define debug_mode_e_DBG_LOGIC_ANALYZER 45 +#define debug_mode_e_DBG_LUA 48 +#define debug_mode_e_DBG_MAP 27 +#define debug_mode_e_DBG_METRICS 28 +#define debug_mode_e_DBG_SR5_PROTOCOL 14 +#define debug_mode_e_DBG_STEPPER_IDLE_CONTROL 3 +#define debug_mode_e_DBG_TCU 47 +#define debug_mode_e_DBG_TLE8888 31 +#define debug_mode_e_DBG_TPS_ACCEL 1 +#define debug_mode_e_DBG_UNUSED41 41 +#define debug_mode_e_DBG_UNUSED_42 42 +#define debug_mode_e_enum "INVALID", "TPS acceleration enrichment", "INVALID", "Stepper Idle Control", "Engine Load accl enrich", "Trigger Counters", "Soft Spark Cut", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "SD card", "sr5", "Knock", "INVALID", "Electronic Throttle", "Executor", "Bench Test / TS commands", "INVALID", "Analog inputs #1", "INSTANT_RPM", "INVALID", "Status", "INVALID", "INVALID", "MAP", "Metrics", "INVALID", "Ion Sense", "TLE8888", "Analog inputs #2", "Dwell Metric", "INVALID", "INVALID", "Boost Control", "INVALID", "INVALID", "ETB Autotune", "Composite Log", "INVALID", "INVALID", "INVALID", "Dyno_View", "Logic_Analyzer", "INVALID", "TCU", "Lua" +#define debug_mode_e_UNUSED23 23 +#define DEFAULT_SELT_STIM_RPM 1200 +#define DEFAULT_SELT_STIM_VVT0 23 +#define DEFAULT_SOLENOID_FREQUENCY 300 +#define DIGIPOT_COUNT 4 +#define display_mode_e_DM_HD44780 1 +#define display_mode_e_DM_HD44780_OVER_PCF8574 2 +#define display_mode_e_DM_NONE 0 +#define DWELL_CURVE_SIZE 8 +#define ego_sensor_e_auto_enum 0="ES_BPSX_D1",2="ES_14Point7_Free",6="ES_AEM",5="ES_Custom",1="ES_Innovate_MTX_L",3="ES_NarrowBand",4="ES_PLX" +#define ego_sensor_e_enum "BPSX", "Innovate", "14Point7", "Narrow", "PLX", "Custom", "AEM" +#define ego_sensor_e_ES_14Point7_Free 2 +#define ego_sensor_e_ES_AEM 6 +#define ego_sensor_e_ES_BPSX_D1 0 +#define ego_sensor_e_ES_Custom 5 +#define ego_sensor_e_ES_Innovate_MTX_L 1 +#define ego_sensor_e_ES_NarrowBand 3 +#define ego_sensor_e_ES_PLX 4 +#define EGT_CHANNEL_COUNT 8 +#define engine_configuration_s_size 4556 +#define engine_load_mode_e_auto_enum 0="LM_SPEED_DENSITY",2="LM_ALPHA_N",3="LM_LUA",100="LM_MOCK",1="LM_REAL_MAF" +#define engine_load_mode_e_enum "Speed Density", "MAF Air Charge", "Alpha-N", "Lua" +#define engine_load_mode_e_LM_ALPHA_N 2 +#define engine_load_mode_e_LM_LUA 3 +#define engine_load_mode_e_LM_MOCK 100 +#define engine_load_mode_e_LM_REAL_MAF 1 +#define engine_load_mode_e_LM_SPEED_DENSITY 0 +#define ENGINE_MAKE_BMW "BMW" +#define ENGINE_MAKE_GM "GM" +#define ENGINE_MAKE_HONDA "Honda" +#define ENGINE_MAKE_Hyundai "Hyundai" +#define ENGINE_MAKE_LADA "Lada" +#define ENGINE_MAKE_MAZDA "Mazda" +#define ENGINE_MAKE_MERCEDES "Mercedes" +#define ENGINE_MAKE_NISSAN "Nissan" +#define ENGINE_MAKE_SUBARU "Subaru" +#define ENGINE_MAKE_TOYOTA "Toyota" +#define ENGINE_MAKE_VAG "VAG" +#define ENGINE_NOISE_CURVE_SIZE 16 +#define ENGINE_SNIFFER_UNIT_US 10 +#define engine_type_e_ALPHAX_8CHAN_SBC 97 +#define engine_type_e_auto_enum 0="DEFAULT_FRANKENSO",97="ALPHAX_8CHAN_SBC",24="BMW_M73_M",50="BMW_M73_MRE",51="BMW_M73_MRE_SLAVE",35="CAMARO_4",65="CITROEN_TU3JP",38="DISCOVERY_PDM",2="DODGE_NEON_1995",46="DODGE_NEON_2003_CRANK",64="DODGE_RAM",61="EEPROM_BENCH_ENGINE",58="ETB_BENCH_ENGINE",3="FORD_ASPIRE_1996",11="FORD_COYOTE",14="FORD_ESCORT_GT",7="FORD_INLINE_6_1995",40="FRANKENSO_BMW_M73_F",47="FRANKENSO_MAZDA_MIATA_2003",56="FRANKENSO_MAZDA_MIATA_NA8",41="FRANKENSO_MIATA_NA6_MAP",49="FRANKENSO_QA_ENGINE",59="FRANKENSO_TEST_33810",15="FUEL_BENCH",8="GY6_139QMB",84="HELLEN_121_NISSAN_4_CYL",72="HELLEN_121_NISSAN_6_CYL",85="HELLEN_121_NISSAN_8_CYL",87="HELLEN_121_NISSAN_ALMERA_N16",71="HELLEN_121_VAG_4_CYL",77="HELLEN_121_VAG_5_CYL",81="HELLEN_121_VAG_8_CYL",78="HELLEN_121_VAG_V6_CYL",79="HELLEN_121_VAG_VR6_CYL",36="HELLEN_128_MERCEDES_4_CYL",88="HELLEN_128_MERCEDES_6_CYL",89="HELLEN_128_MERCEDES_8_CYL",82="HELLEN_154_HYUNDAI_COUPE_BK1",95="HELLEN_154_HYUNDAI_COUPE_BK2",76="HELLEN_154_VAG",75="HELLEN_2CHAN_STIM_QC",74="HELLEN_4CHAN_STIM_QC",57="HELLEN_HONDA_BCM",34="HELLEN_NA6",10="HELLEN_NA8_96",80="HELLEN_NA94",83="HELLEN_NB1",94="HELLEN_NB1_36",69="HELLEN_NB2",86="HELLEN_NB2_36",43="HONDA_600",90="HONDA_K",104="HYUNDAI_PB",60="L9779_BENCH_ENGINE",54="MAVERICK_X3",55="MAZDA_MIATA_2003_BOARD_TEST",33="ME17_9_MISC",21="MIATA_1996",1="MIATA_PROTEUS_TCU",99="MINIMAL_PINS",12="MITSUBISHI_3A92",16="MITSUBISHI_4G93",31="MRE_BOARD_NEW_TEST",23="MRE_BODY_CONTROL",68="MRE_M111",20="MRE_MIATA_94_MAP",66="MRE_MIATA_NA6_MAP",4="MRE_SECONDARY_CAN",37="MRE_SUBARU_EJ18",62="MRE_VW_B6",5="NISSAN_PRIMERA",30="PROTEUS_ANALOG_PWM_TEST",63="PROTEUS_BMW_M73",9="PROTEUS_E65_6H_MAN_IN_THE_MIDDLE",27="PROTEUS_GM_LS_4",6="PROTEUS_HARLEY",91="PROTEUS_HONDA_OBD2A",25="PROTEUS_LUA_DEMO",17="PROTEUS_M111",67="PROTEUS_MIATA_NB2",93="PROTEUS_N73",103="PROTEUS_NISSAN_VQ35",42="PROTEUS_QC_TEST_BOARD",98="PROTEUS_SBC",73="PROTEUS_STIM_QC",39="PROTEUS_VW_B6",29="SACHS",92="SIMULATOR_CONFIG",70="SUBARUEG33_DEFAULTS",22="SUBARU_2003_WRX",100="TEST_100",101="TEST_101",102="TEST_102",18="TEST_33816",28="TEST_CRANK_ENGINE",48="TEST_DC_WASTEGATE_DISCOVERY",26="TEST_ENGINE",45="TEST_ENGINE_VVT",52="TEST_ISSUE_366_BOTH",53="TEST_ISSUE_366_RISE",19="TEST_ROTARY",13="TOYOTA_1NZ_FE",44="TOYOTA_2JZ_GTE_VVTi",32="VW_ABA",96="WASTEGATE_PROTEUS_TEST" +#define engine_type_e_BMW_M73_M 24 +#define engine_type_e_BMW_M73_MRE 50 +#define engine_type_e_BMW_M73_MRE_SLAVE 51 +#define engine_type_e_CAMARO_4 35 +#define engine_type_e_CITROEN_TU3JP 65 +#define engine_type_e_DEFAULT_FRANKENSO 0 +#define engine_type_e_DISCOVERY_PDM 38 +#define engine_type_e_DODGE_NEON_1995 2 +#define engine_type_e_DODGE_NEON_2003_CRANK 46 +#define engine_type_e_DODGE_RAM 64 +#define engine_type_e_EEPROM_BENCH_ENGINE 61 +#define engine_type_e_ETB_BENCH_ENGINE 58 +#define engine_type_e_FORD_ASPIRE_1996 3 +#define engine_type_e_FORD_COYOTE 11 +#define engine_type_e_FORD_ESCORT_GT 14 +#define engine_type_e_FORD_INLINE_6_1995 7 +#define engine_type_e_FRANKENSO_BMW_M73_F 40 +#define engine_type_e_FRANKENSO_MAZDA_MIATA_2003 47 +#define engine_type_e_FRANKENSO_MAZDA_MIATA_NA8 56 +#define engine_type_e_FRANKENSO_MIATA_NA6_MAP 41 +#define engine_type_e_FRANKENSO_QA_ENGINE 49 +#define engine_type_e_FRANKENSO_TEST_33810 59 +#define engine_type_e_FUEL_BENCH 15 +#define engine_type_e_GY6_139QMB 8 +#define engine_type_e_HELLEN_121_NISSAN_4_CYL 84 +#define engine_type_e_HELLEN_121_NISSAN_6_CYL 72 +#define engine_type_e_HELLEN_121_NISSAN_8_CYL 85 +#define engine_type_e_HELLEN_121_NISSAN_ALMERA_N16 87 +#define engine_type_e_HELLEN_121_VAG_4_CYL 71 +#define engine_type_e_HELLEN_121_VAG_5_CYL 77 +#define engine_type_e_HELLEN_121_VAG_8_CYL 81 +#define engine_type_e_HELLEN_121_VAG_V6_CYL 78 +#define engine_type_e_HELLEN_121_VAG_VR6_CYL 79 +#define engine_type_e_HELLEN_128_MERCEDES_4_CYL 36 +#define engine_type_e_HELLEN_128_MERCEDES_6_CYL 88 +#define engine_type_e_HELLEN_128_MERCEDES_8_CYL 89 +#define engine_type_e_HELLEN_154_HYUNDAI_COUPE_BK1 82 +#define engine_type_e_HELLEN_154_HYUNDAI_COUPE_BK2 95 +#define engine_type_e_HELLEN_154_VAG 76 +#define engine_type_e_HELLEN_2CHAN_STIM_QC 75 +#define engine_type_e_HELLEN_4CHAN_STIM_QC 74 +#define engine_type_e_HELLEN_HONDA_BCM 57 +#define engine_type_e_HELLEN_NA6 34 +#define engine_type_e_HELLEN_NA8_96 10 +#define engine_type_e_HELLEN_NA94 80 +#define engine_type_e_HELLEN_NB1 83 +#define engine_type_e_HELLEN_NB1_36 94 +#define engine_type_e_HELLEN_NB2 69 +#define engine_type_e_HELLEN_NB2_36 86 +#define engine_type_e_HONDA_600 43 +#define engine_type_e_HONDA_K 90 +#define engine_type_e_HYUNDAI_PB 104 +#define engine_type_e_L9779_BENCH_ENGINE 60 +#define engine_type_e_MAVERICK_X3 54 +#define engine_type_e_MAZDA_MIATA_2003_BOARD_TEST 55 +#define engine_type_e_ME17_9_MISC 33 +#define engine_type_e_MIATA_1996 21 +#define engine_type_e_MIATA_PROTEUS_TCU 1 +#define engine_type_e_MINIMAL_PINS 99 +#define engine_type_e_MITSUBISHI_3A92 12 +#define engine_type_e_MITSUBISHI_4G93 16 +#define engine_type_e_MRE_BOARD_NEW_TEST 31 +#define engine_type_e_MRE_BODY_CONTROL 23 +#define engine_type_e_MRE_M111 68 +#define engine_type_e_MRE_MIATA_94_MAP 20 +#define engine_type_e_MRE_MIATA_NA6_MAP 66 +#define engine_type_e_MRE_SECONDARY_CAN 4 +#define engine_type_e_MRE_SUBARU_EJ18 37 +#define engine_type_e_MRE_VW_B6 62 +#define engine_type_e_NISSAN_PRIMERA 5 +#define engine_type_e_PROTEUS_ANALOG_PWM_TEST 30 +#define engine_type_e_PROTEUS_BMW_M73 63 +#define engine_type_e_PROTEUS_E65_6H_MAN_IN_THE_MIDDLE 9 +#define engine_type_e_PROTEUS_GM_LS_4 27 +#define engine_type_e_PROTEUS_HARLEY 6 +#define engine_type_e_PROTEUS_HONDA_OBD2A 91 +#define engine_type_e_PROTEUS_LUA_DEMO 25 +#define engine_type_e_PROTEUS_M111 17 +#define engine_type_e_PROTEUS_MIATA_NB2 67 +#define engine_type_e_PROTEUS_N73 93 +#define engine_type_e_PROTEUS_NISSAN_VQ35 103 +#define engine_type_e_PROTEUS_QC_TEST_BOARD 42 +#define engine_type_e_PROTEUS_SBC 98 +#define engine_type_e_PROTEUS_STIM_QC 73 +#define engine_type_e_PROTEUS_VW_B6 39 +#define engine_type_e_SACHS 29 +#define engine_type_e_SIMULATOR_CONFIG 92 +#define engine_type_e_SUBARU_2003_WRX 22 +#define engine_type_e_SUBARUEG33_DEFAULTS 70 +#define engine_type_e_TEST_100 100 +#define engine_type_e_TEST_101 101 +#define engine_type_e_TEST_102 102 +#define engine_type_e_TEST_33816 18 +#define engine_type_e_TEST_CRANK_ENGINE 28 +#define engine_type_e_TEST_DC_WASTEGATE_DISCOVERY 48 +#define engine_type_e_TEST_ENGINE 26 +#define engine_type_e_TEST_ENGINE_VVT 45 +#define engine_type_e_TEST_ISSUE_366_BOTH 52 +#define engine_type_e_TEST_ISSUE_366_RISE 53 +#define engine_type_e_TEST_ROTARY 19 +#define engine_type_e_TOYOTA_1NZ_FE 13 +#define engine_type_e_TOYOTA_2JZ_GTE_VVTi 44 +#define engine_type_e_VW_ABA 32 +#define engine_type_e_WASTEGATE_PROTEUS_TEST 96 +#define engineSyncCam_enum "Intake First Bank", "Exhaust First Bank", "Intake Second Bank", "Exhaust Second Bank" +#define ETB_BIAS_CURVE_LENGTH 8 +#define ETB_COUNT 2 +#define ETB_HW_MAX_FREQUENCY 3000 +#define FLASH_DATA_VERSION 230721 +#define FUEL_LEVEL_TABLE_COUNT 8 +#define FUEL_LOAD_COUNT 16 +#define fuel_pressure_sensor_mode_e_auto_enum 0="FPM_Absolute",2="FPM_Differential",1="FPM_Gauge" +#define fuel_pressure_sensor_mode_e_enum "Absolute", "Gauge", "Differential", "INVALID" +#define fuel_pressure_sensor_mode_e_FPM_Absolute 0 +#define fuel_pressure_sensor_mode_e_FPM_Differential 2 +#define fuel_pressure_sensor_mode_e_FPM_Gauge 1 +#define FUEL_RPM_COUNT 16 +#define GAP_TRACKING_LENGTH 18 +#define GAUGE_CATEGORY_BOOST_CONTROL "Boost Control" +#define GAUGE_CATEGORY_ETB "ETB more" +#define GAUGE_CATEGORY_FUEL_MATH "Fuel: math" +#define GAUGE_CATEGORY_SYNC "Sync" +#define GAUGE_CATEGORY_TIMING "Timing" +#define GAUGE_COIL_DWELL_TIME "Ignition: coil charge time" +#define GAUGE_NAME_ACCEL_LAT "Accel: Lateral" +#define GAUGE_NAME_ACCEL_LON "Accel: Longitudinal" +#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll" +#define GAUGE_NAME_ACCEL_VERT "Accel: Vertical" +#define GAUGE_NAME_ACCEL_X "Acceleration: X" +#define GAUGE_NAME_ACCEL_Y "Acceleration: Y" +#define GAUGE_NAME_ACCEL_YAW "Acceleration: Yaw" +#define GAUGE_NAME_ACCEL_Z "Acceleration: Z" +#define GAUGE_NAME_ADJUSTED_TIMING "Timing: ignition" +#define GAUGE_NAME_AFR "Air/Fuel Ratio" +#define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2" +#define GAUGE_NAME_AFR2_GAS_SCALE "Air/Fuel Ratio 2 (Gas Scale)" +#define GAUGE_NAME_AFR_GAS_SCALE "Air/Fuel Ratio (Gas Scale)" +#define GAUGE_NAME_AIR_FLOW_ESTIMATE "Air: Flow estimate" +#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF" +#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF #2" +#define GAUGE_NAME_AIR_MASS "Air: Cylinder airmass" +#define GAUGE_NAME_AUX_LINEAR_1 "Aux linear #1" +#define GAUGE_NAME_AUX_LINEAR_2 "Aux linear #2" +#define GAUGE_NAME_AUX_TEMP1 "Aux temp 1" +#define GAUGE_NAME_AUX_TEMP2 "Aux temp 2" +#define GAUGE_NAME_BARO_PRESSURE "Barometric pressure" +#define GAUGE_NAME_BOOST_CLOSED_LOOP "Boost: Closed loop" +#define GAUGE_NAME_BOOST_OPEN_LOOP "Boost: Open loop" +#define GAUGE_NAME_BOOST_OUTPUT "Boost: Output" +#define GAUGE_NAME_BOOST_TARGET "Boost: Target" +#define GAUGE_NAME_CAN_READ_OK "CAN: Rx" +#define GAUGE_NAME_CAN_WRITE_ERR "CAN: Tx err" +#define GAUGE_NAME_CAN_WRITE_OK "CAN: Tx OK" +#define GAUGE_NAME_CLT "CLT" +#define GAUGE_NAME_CPU_TEMP "CPU Temperature" +#define GAUGE_NAME_CURRENT_GEAR "Current Gear" +#define GAUGE_NAME_DEBUG_F1 "debug f1" +#define GAUGE_NAME_DEBUG_F2 "debug f2: iTerm" +#define GAUGE_NAME_DEBUG_F3 "debug f3: prevError" +#define GAUGE_NAME_DEBUG_F4 "debug f4: iParam" +#define GAUGE_NAME_DEBUG_F5 "debug f5: dParam" +#define GAUGE_NAME_DEBUG_F6 "debug f6: dTerm" +#define GAUGE_NAME_DEBUG_F7 "debug f7" +#define GAUGE_NAME_DEBUG_I1 "debug i1: pParam" +#define GAUGE_NAME_DEBUG_I2 "debug i2: offset" +#define GAUGE_NAME_DEBUG_I3 "debug i3" +#define GAUGE_NAME_DEBUG_I4 "debug i4" +#define GAUGE_NAME_DEBUG_I5 "debug i5" +#define GAUGE_NAME_DESIRED_GEAR "TCU: Desired Gear" +#define GAUGE_NAME_DETECTED_GEAR "Detected Gear" +#define GAUGE_NAME_DWELL_DUTY "Ignition: coil duty cycle" +#define GAUGE_NAME_ECU_TEMPERATURE "ECU temperature" +#define GAUGE_NAME_ENGINE_CRC16 "Engine CRC16" +#define GAUGE_NAME_ETB_DUTY "ETB: Duty" +#define GAUGE_NAME_ETB_ERROR "ETB: position error" +#define GAUGE_NAME_ETB_TARGET "ETB: position target" +#define GAUGE_NAME_FLEX "Flex Ethanol %" +#define GAUGE_NAME_FUEL_BARO_CORR "Fuel: Barometric pressure mult" +#define GAUGE_NAME_FUEL_BASE "Fuel: base cycle mass" +#define GAUGE_NAME_FUEL_CHARGE_TEMP "Fuel: Estimated charge temperature" +#define GAUGE_NAME_FUEL_CLT_CORR "Fuel: CLT correction" +#define GAUGE_NAME_FUEL_CONSUMPTION "Fuel: Total consumed" +#define GAUGE_NAME_FUEL_CRANKING "Fuel: cranking" +#define GAUGE_NAME_FUEL_FLOW "Fuel: Flow rate" +#define GAUGE_NAME_FUEL_IAT_CORR "Fuel: IAT correction" +#define GAUGE_NAME_FUEL_INJ_DUTY "Fuel: injector duty cycle" +#define GAUGE_NAME_FUEL_INJECTION_TIMING "Fuel: Injection timing SOI" +#define GAUGE_NAME_FUEL_LAST_INJECTION "Fuel: Last inj pulse width" +#define GAUGE_NAME_FUEL_LEVEL "Fuel level" +#define GAUGE_NAME_FUEL_LOAD "Fuel: Load" +#define GAUGE_NAME_FUEL_PRESSURE_HIGH "Fuel pressure (high)" +#define GAUGE_NAME_FUEL_PRESSURE_HIGH_UNITS "bar" +#define GAUGE_NAME_FUEL_PRESSURE_LOW "Fuel pressure (low)" +#define GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS "kPa" +#define GAUGE_NAME_FUEL_RUNNING "Fuel: running" +#define GAUGE_NAME_FUEL_TEMPERATURE "Fuel Temperature" +#define GAUGE_NAME_FUEL_TPS_EXTRA "Fuel: TPS AE add fuel ms" +#define GAUGE_NAME_FUEL_TPS_ROC "fuel: TPS change" +#define GAUGE_NAME_FUEL_TRIM "Fuel: fuel trim" +#define GAUGE_NAME_FUEL_TRIM_2 "Fuel: fuel trim 2" +#define GAUGE_NAME_FUEL_VE "Fuel: VE" +#define GAUGE_NAME_FUEL_WALL_AMOUNT "Fuel: wall amount" +#define GAUGE_NAME_FUEL_WALL_CORRECTION "Fuel: wall correction" +#define GAUGE_NAME_FW_VERSION "ECU Software Version" +#define GAUGE_NAME_GEAR_RATIO "Gearbox Ratio" +#define GAUGE_NAME_GYRO_YAW "Gyro: Yaw rate" +#define GAUGE_NAME_IAC "Idle: Position" +#define GAUGE_NAME_IAT "IAT" +#define GAUGE_NAME_IDLE_POSITION "Idle: Position sensor" +#define GAUGE_NAME_IGNITION_LOAD "Ignition: load" +#define GAUGE_NAME_IGNITION_MODE "Ignition: Mode" +#define GAUGE_NAME_INJECTION_MODE "Fuel: Injection mode" +#define GAUGE_NAME_INJECTOR_LAG "Fuel: injector lag" +#define GAUGE_NAME_ISS "TCU: Input Shaft Speed" +#define GAUGE_NAME_KNOCK_1 "knock 1" +#define GAUGE_NAME_KNOCK_10 "knock 10" +#define GAUGE_NAME_KNOCK_11 "knock 11" +#define GAUGE_NAME_KNOCK_12 "knock 12" +#define GAUGE_NAME_KNOCK_2 "knock 2" +#define GAUGE_NAME_KNOCK_3 "knock 3" +#define GAUGE_NAME_KNOCK_4 "knock 4" +#define GAUGE_NAME_KNOCK_5 "knock 5" +#define GAUGE_NAME_KNOCK_6 "knock 6" +#define GAUGE_NAME_KNOCK_7 "knock 7" +#define GAUGE_NAME_KNOCK_8 "knock 8" +#define GAUGE_NAME_KNOCK_9 "knock 9" +#define GAUGE_NAME_KNOCK_COUNTER "Knock: Count" +#define GAUGE_NAME_KNOCK_LEVEL "Knock: Current level" +#define GAUGE_NAME_KNOCK_RETARD "Knock: Retard" +#define GAUGE_NAME_LAMBDA "Lambda" +#define GAUGE_NAME_LAMBDA2 "Lambda 2" +#define GAUGE_NAME_LAST_ERROR "Last error" +#define GAUGE_NAME_MAF "MAF" +#define GAUGE_NAME_MAP "MAP" +#define GAUGE_NAME_OIL_PRESSURE "Oil Pressure" +#define GAUGE_NAME_OIL_PRESSURE_UNITS "kPa" +#define GAUGE_NAME_RAW_FUEL_PRESSURE_HIGH "Fuel pressure raw (high)" +#define GAUGE_NAME_RAW_FUEL_PRESSURE_LOW "Fuel pressure raw (low)" +#define GAUGE_NAME_RPM "RPM" +#define GAUGE_NAME_TARGET_AFR "Fuel: target AFR" +#define GAUGE_NAME_TARGET_LAMBDA "Fuel: target lambda" +#define GAUGE_NAME_TC_RATIO "TCU: Torque Converter Ratio" +#define GAUGE_NAME_TCHARGE "Air: SD tCharge" +#define GAUGE_NAME_THROTTLE_PEDAL "Throttle pedal position" +#define GAUGE_NAME_TIME "Time" +#define GAUGE_NAME_TIMING_ADVANCE "Ignition: Timing" +#define GAUGE_NAME_TPS "TPS" +#define GAUGE_NAME_TPS2 "TPS2" +#define GAUGE_NAME_TRG_ERR "Trigger Error Counter" +#define GAUGE_NAME_TRG_GAP "Trigger Sync Latest Ratio" +#define GAUGE_NAME_TUNE_CRC16 "Tune CRC16" +#define GAUGE_NAME_TURBO_SPEED "Turbocharger Speed" +#define GAUGE_NAME_UPTIME "Uptime" +#define GAUGE_NAME_VBAT "VBatt" +#define GAUGE_NAME_VERSION "firmware" +#define GAUGE_NAME_VVS "Vehicle Speed" +#define GAUGE_NAME_VVT_B1E "VVT: bank 1 exhaust" +#define GAUGE_NAME_VVT_B1I "VVT: bank 1 intake" +#define GAUGE_NAME_VVT_B2E "VVT: bank 2 exhaust" +#define GAUGE_NAME_VVT_B2I "VVT: bank 2 intake" +#define GAUGE_NAME_VVT_TARGET_B1E "VVT: bank 1 exhaust target" +#define GAUGE_NAME_VVT_TARGET_B1I "VVT: bank 1 intake target" +#define GAUGE_NAME_VVT_TARGET_B2E "VVT: bank 2 exhaust target" +#define GAUGE_NAME_VVT_TARGET_B2I "VVT: bank 2 intake target" +#define GAUGE_NAME_WARNING_COUNT "Warning count" +#define GAUGE_NAME_WARNING_COUNTER "Warning: counter" +#define GAUGE_NAME_WARNING_LAST "Warning: last" +#define GAUGE_NAME_WG_POSITION "Wastegate position sensor" +#define gear_controller_e_enum "None", "Button Shift" +#define gear_e_GEAR_1 1 +#define gear_e_GEAR_2 2 +#define gear_e_GEAR_3 3 +#define gear_e_GEAR_4 4 +#define gear_e_NEUTRAL 0 +#define gear_e_REVERSE -1 +#define GearControllerMode_auto_enum 0="None",1="ButtonShift",2="Generic" +#define GearControllerMode_ButtonShift 1 +#define GearControllerMode_Generic 2 +#define GearControllerMode_None 0 +#define Gpio_A0 2 +#define Gpio_A1 3 +#define Gpio_A10 12 +#define Gpio_A11 13 +#define Gpio_A12 14 +#define Gpio_A13 15 +#define Gpio_A14 16 +#define Gpio_A15 17 +#define Gpio_A2 4 +#define Gpio_A3 5 +#define Gpio_A4 6 +#define Gpio_A5 7 +#define Gpio_A6 8 +#define Gpio_A7 9 +#define Gpio_A8 10 +#define Gpio_A9 11 +#define Gpio_auto_enum 0="Unassigned",2="A0",3="A1",12="A10",13="A11",14="A12",15="A13",16="A14",17="A15",4="A2",5="A3",6="A4",7="A5",8="A6",9="A7",10="A8",11="A9",18="B0",19="B1",28="B10",29="B11",30="B12",31="B13",32="B14",33="B15",20="B2",21="B3",22="B4",23="B5",24="B6",25="B7",26="B8",27="B9",34="C0",35="C1",44="C10",45="C11",46="C12",47="C13",48="C14",49="C15",36="C2",37="C3",38="C4",39="C5",40="C6",41="C7",42="C8",43="C9",249="CAN_PIN_0",250="CAN_PIN_1",251="CAN_PIN_2",252="CAN_PIN_3",253="CAN_PIN_4",254="CAN_PIN_5",255="CAN_PIN_6",256="CAN_PIN_7",50="D0",51="D1",60="D10",61="D11",62="D12",63="D13",64="D14",65="D15",52="D2",53="D3",54="D4",55="D5",56="D6",57="D7",58="D8",59="D9",66="E0",67="E1",76="E10",77="E11",78="E12",79="E13",80="E14",81="E15",68="E2",69="E3",70="E4",71="E5",72="E6",73="E7",74="E8",75="E9",82="F0",83="F1",92="F10",93="F11",94="F12",95="F13",96="F14",97="F15",84="F2",85="F3",86="F4",87="F5",88="F6",89="F7",90="F8",91="F9",98="G0",99="G1",108="G10",109="G11",110="G12",111="G13",112="G14",113="G15",100="G2",101="G3",102="G4",103="G5",104="G6",105="G7",106="G8",107="G9",114="H0",115="H1",124="H10",125="H11",126="H12",127="H13",128="H14",129="H15",116="H2",117="H3",118="H4",119="H5",120="H6",121="H7",122="H8",123="H9",130="I0",131="I1",140="I10",141="I11",142="I12",143="I13",144="I14",145="I15",132="I2",133="I3",134="I4",135="I5",136="I6",137="I7",138="I8",139="I9",1="Invalid",215="L9779_IGN_1",216="L9779_IGN_2",217="L9779_IGN_3",218="L9779_IGN_4",219="L9779_OUT_1",228="L9779_OUT_10",229="L9779_OUT_11",230="L9779_OUT_12",231="L9779_OUT_13",232="L9779_OUT_14",233="L9779_OUT_15",234="L9779_OUT_16",235="L9779_OUT_17",236="L9779_OUT_18",237="L9779_OUT_19",220="L9779_OUT_2",238="L9779_OUT_20",243="L9779_OUT_25",244="L9779_OUT_26",245="L9779_OUT_27",246="L9779_OUT_28",221="L9779_OUT_3",222="L9779_OUT_4",223="L9779_OUT_5",224="L9779_OUT_6",225="L9779_OUT_7",226="L9779_OUT_8",227="L9779_OUT_9",239="L9779_OUT_A",240="L9779_OUT_B",241="L9779_OUT_C",242="L9779_OUT_D",247="L9779_OUT_MRD",248="L9779_PIN_KEY",284="MC33810_0_GD_0",285="MC33810_0_GD_1",286="MC33810_0_GD_2",287="MC33810_0_GD_3",280="MC33810_0_OUT_0",281="MC33810_0_OUT_1",282="MC33810_0_OUT_2",283="MC33810_0_OUT_3",294="MC33810_1_GD_0",295="MC33810_1_GD_1",296="MC33810_1_GD_2",297="MC33810_1_GD_3",290="MC33810_1_OUT_0",291="MC33810_1_OUT_1",292="MC33810_1_OUT_2",293="MC33810_1_OUT_3",146="MC33972_PIN_1",155="MC33972_PIN_10",156="MC33972_PIN_11",157="MC33972_PIN_12",158="MC33972_PIN_13",159="MC33972_PIN_14",160="MC33972_PIN_15",161="MC33972_PIN_16",162="MC33972_PIN_17",163="MC33972_PIN_18",164="MC33972_PIN_19",147="MC33972_PIN_2",165="MC33972_PIN_20",166="MC33972_PIN_21",167="MC33972_PIN_22",148="MC33972_PIN_3",149="MC33972_PIN_4",150="MC33972_PIN_5",151="MC33972_PIN_6",152="MC33972_PIN_7",153="MC33972_PIN_8",154="MC33972_PIN_9",257="PROTECTED_PIN_0",258="PROTECTED_PIN_1",267="PROTECTED_PIN_10",268="PROTECTED_PIN_11",269="PROTECTED_PIN_12",270="PROTECTED_PIN_13",271="PROTECTED_PIN_14",272="PROTECTED_PIN_15",259="PROTECTED_PIN_2",260="PROTECTED_PIN_3",261="PROTECTED_PIN_4",262="PROTECTED_PIN_5",263="PROTECTED_PIN_6",264="PROTECTED_PIN_7",265="PROTECTED_PIN_8",266="PROTECTED_PIN_9",199="TLE6240_PIN_1",208="TLE6240_PIN_10",209="TLE6240_PIN_11",210="TLE6240_PIN_12",211="TLE6240_PIN_13",212="TLE6240_PIN_14",213="TLE6240_PIN_15",214="TLE6240_PIN_16",200="TLE6240_PIN_2",201="TLE6240_PIN_3",202="TLE6240_PIN_4",203="TLE6240_PIN_5",204="TLE6240_PIN_6",205="TLE6240_PIN_7",206="TLE6240_PIN_8",207="TLE6240_PIN_9",168="TLE8888_PIN_1",177="TLE8888_PIN_10",178="TLE8888_PIN_11",179="TLE8888_PIN_12",180="TLE8888_PIN_13",181="TLE8888_PIN_14",182="TLE8888_PIN_15",183="TLE8888_PIN_16",184="TLE8888_PIN_17",185="TLE8888_PIN_18",186="TLE8888_PIN_19",169="TLE8888_PIN_2",187="TLE8888_PIN_20",188="TLE8888_PIN_21",189="TLE8888_PIN_22",190="TLE8888_PIN_23",191="TLE8888_PIN_24",192="TLE8888_PIN_25",193="TLE8888_PIN_26",194="TLE8888_PIN_27",195="TLE8888_PIN_28",170="TLE8888_PIN_3",171="TLE8888_PIN_4",172="TLE8888_PIN_5",173="TLE8888_PIN_6",174="TLE8888_PIN_7",175="TLE8888_PIN_8",176="TLE8888_PIN_9",197="TLE8888_PIN_KEY",196="TLE8888_PIN_MR",198="TLE8888_PIN_WAKE" +#define Gpio_B0 18 +#define Gpio_B1 19 +#define Gpio_B10 28 +#define Gpio_B11 29 +#define Gpio_B12 30 +#define Gpio_B13 31 +#define Gpio_B14 32 +#define Gpio_B15 33 +#define Gpio_B2 20 +#define Gpio_B3 21 +#define Gpio_B4 22 +#define Gpio_B5 23 +#define Gpio_B6 24 +#define Gpio_B7 25 +#define Gpio_B8 26 +#define Gpio_B9 27 +#define Gpio_C0 34 +#define Gpio_C1 35 +#define Gpio_C10 44 +#define Gpio_C11 45 +#define Gpio_C12 46 +#define Gpio_C13 47 +#define Gpio_C14 48 +#define Gpio_C15 49 +#define Gpio_C2 36 +#define Gpio_C3 37 +#define Gpio_C4 38 +#define Gpio_C5 39 +#define Gpio_C6 40 +#define Gpio_C7 41 +#define Gpio_C8 42 +#define Gpio_C9 43 +#define Gpio_CAN_PIN_0 249 +#define Gpio_CAN_PIN_1 250 +#define Gpio_CAN_PIN_2 251 +#define Gpio_CAN_PIN_3 252 +#define Gpio_CAN_PIN_4 253 +#define Gpio_CAN_PIN_5 254 +#define Gpio_CAN_PIN_6 255 +#define Gpio_CAN_PIN_7 256 +#define Gpio_D0 50 +#define Gpio_D1 51 +#define Gpio_D10 60 +#define Gpio_D11 61 +#define Gpio_D12 62 +#define Gpio_D13 63 +#define Gpio_D14 64 +#define Gpio_D15 65 +#define Gpio_D2 52 +#define Gpio_D3 53 +#define Gpio_D4 54 +#define Gpio_D5 55 +#define Gpio_D6 56 +#define Gpio_D7 57 +#define Gpio_D8 58 +#define Gpio_D9 59 +#define Gpio_E0 66 +#define Gpio_E1 67 +#define Gpio_E10 76 +#define Gpio_E11 77 +#define Gpio_E12 78 +#define Gpio_E13 79 +#define Gpio_E14 80 +#define Gpio_E15 81 +#define Gpio_E2 68 +#define Gpio_E3 69 +#define Gpio_E4 70 +#define Gpio_E5 71 +#define Gpio_E6 72 +#define Gpio_E7 73 +#define Gpio_E8 74 +#define Gpio_E9 75 +#define Gpio_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define Gpio_F0 82 +#define Gpio_F1 83 +#define Gpio_F10 92 +#define Gpio_F11 93 +#define Gpio_F12 94 +#define Gpio_F13 95 +#define Gpio_F14 96 +#define Gpio_F15 97 +#define Gpio_F2 84 +#define Gpio_F3 85 +#define Gpio_F4 86 +#define Gpio_F5 87 +#define Gpio_F6 88 +#define Gpio_F7 89 +#define Gpio_F8 90 +#define Gpio_F9 91 +#define Gpio_G0 98 +#define Gpio_G1 99 +#define Gpio_G10 108 +#define Gpio_G11 109 +#define Gpio_G12 110 +#define Gpio_G13 111 +#define Gpio_G14 112 +#define Gpio_G15 113 +#define Gpio_G2 100 +#define Gpio_G3 101 +#define Gpio_G4 102 +#define Gpio_G5 103 +#define Gpio_G6 104 +#define Gpio_G7 105 +#define Gpio_G8 106 +#define Gpio_G9 107 +#define Gpio_H0 114 +#define Gpio_H1 115 +#define Gpio_H10 124 +#define Gpio_H11 125 +#define Gpio_H12 126 +#define Gpio_H13 127 +#define Gpio_H14 128 +#define Gpio_H15 129 +#define Gpio_H2 116 +#define Gpio_H3 117 +#define Gpio_H4 118 +#define Gpio_H5 119 +#define Gpio_H6 120 +#define Gpio_H7 121 +#define Gpio_H8 122 +#define Gpio_H9 123 +#define Gpio_I0 130 +#define Gpio_I1 131 +#define Gpio_I10 140 +#define Gpio_I11 141 +#define Gpio_I12 142 +#define Gpio_I13 143 +#define Gpio_I14 144 +#define Gpio_I15 145 +#define Gpio_I2 132 +#define Gpio_I3 133 +#define Gpio_I4 134 +#define Gpio_I5 135 +#define Gpio_I6 136 +#define Gpio_I7 137 +#define Gpio_I8 138 +#define Gpio_I9 139 +#define Gpio_Invalid 1 +#define Gpio_L9779_IGN_1 215 +#define Gpio_L9779_IGN_2 216 +#define Gpio_L9779_IGN_3 217 +#define Gpio_L9779_IGN_4 218 +#define Gpio_L9779_OUT_1 219 +#define Gpio_L9779_OUT_10 228 +#define Gpio_L9779_OUT_11 229 +#define Gpio_L9779_OUT_12 230 +#define Gpio_L9779_OUT_13 231 +#define Gpio_L9779_OUT_14 232 +#define Gpio_L9779_OUT_15 233 +#define Gpio_L9779_OUT_16 234 +#define Gpio_L9779_OUT_17 235 +#define Gpio_L9779_OUT_18 236 +#define Gpio_L9779_OUT_19 237 +#define Gpio_L9779_OUT_2 220 +#define Gpio_L9779_OUT_20 238 +#define Gpio_L9779_OUT_25 243 +#define Gpio_L9779_OUT_26 244 +#define Gpio_L9779_OUT_27 245 +#define Gpio_L9779_OUT_28 246 +#define Gpio_L9779_OUT_3 221 +#define Gpio_L9779_OUT_4 222 +#define Gpio_L9779_OUT_5 223 +#define Gpio_L9779_OUT_6 224 +#define Gpio_L9779_OUT_7 225 +#define Gpio_L9779_OUT_8 226 +#define Gpio_L9779_OUT_9 227 +#define Gpio_L9779_OUT_A 239 +#define Gpio_L9779_OUT_B 240 +#define Gpio_L9779_OUT_C 241 +#define Gpio_L9779_OUT_D 242 +#define Gpio_L9779_OUT_MRD 247 +#define Gpio_L9779_PIN_KEY 248 +#define Gpio_MC33810_0_GD_0 284 +#define Gpio_MC33810_0_GD_1 285 +#define Gpio_MC33810_0_GD_2 286 +#define Gpio_MC33810_0_GD_3 287 +#define Gpio_MC33810_0_OUT_0 280 +#define Gpio_MC33810_0_OUT_1 281 +#define Gpio_MC33810_0_OUT_2 282 +#define Gpio_MC33810_0_OUT_3 283 +#define Gpio_MC33810_1_GD_0 294 +#define Gpio_MC33810_1_GD_1 295 +#define Gpio_MC33810_1_GD_2 296 +#define Gpio_MC33810_1_GD_3 297 +#define Gpio_MC33810_1_OUT_0 290 +#define Gpio_MC33810_1_OUT_1 291 +#define Gpio_MC33810_1_OUT_2 292 +#define Gpio_MC33810_1_OUT_3 293 +#define Gpio_MC33972_PIN_1 146 +#define Gpio_MC33972_PIN_10 155 +#define Gpio_MC33972_PIN_11 156 +#define Gpio_MC33972_PIN_12 157 +#define Gpio_MC33972_PIN_13 158 +#define Gpio_MC33972_PIN_14 159 +#define Gpio_MC33972_PIN_15 160 +#define Gpio_MC33972_PIN_16 161 +#define Gpio_MC33972_PIN_17 162 +#define Gpio_MC33972_PIN_18 163 +#define Gpio_MC33972_PIN_19 164 +#define Gpio_MC33972_PIN_2 147 +#define Gpio_MC33972_PIN_20 165 +#define Gpio_MC33972_PIN_21 166 +#define Gpio_MC33972_PIN_22 167 +#define Gpio_MC33972_PIN_3 148 +#define Gpio_MC33972_PIN_4 149 +#define Gpio_MC33972_PIN_5 150 +#define Gpio_MC33972_PIN_6 151 +#define Gpio_MC33972_PIN_7 152 +#define Gpio_MC33972_PIN_8 153 +#define Gpio_MC33972_PIN_9 154 +#define Gpio_PROTECTED_PIN_0 257 +#define Gpio_PROTECTED_PIN_1 258 +#define Gpio_PROTECTED_PIN_10 267 +#define Gpio_PROTECTED_PIN_11 268 +#define Gpio_PROTECTED_PIN_12 269 +#define Gpio_PROTECTED_PIN_13 270 +#define Gpio_PROTECTED_PIN_14 271 +#define Gpio_PROTECTED_PIN_15 272 +#define Gpio_PROTECTED_PIN_2 259 +#define Gpio_PROTECTED_PIN_3 260 +#define Gpio_PROTECTED_PIN_4 261 +#define Gpio_PROTECTED_PIN_5 262 +#define Gpio_PROTECTED_PIN_6 263 +#define Gpio_PROTECTED_PIN_7 264 +#define Gpio_PROTECTED_PIN_8 265 +#define Gpio_PROTECTED_PIN_9 266 +#define Gpio_TLE6240_PIN_1 199 +#define Gpio_TLE6240_PIN_10 208 +#define Gpio_TLE6240_PIN_11 209 +#define Gpio_TLE6240_PIN_12 210 +#define Gpio_TLE6240_PIN_13 211 +#define Gpio_TLE6240_PIN_14 212 +#define Gpio_TLE6240_PIN_15 213 +#define Gpio_TLE6240_PIN_16 214 +#define Gpio_TLE6240_PIN_2 200 +#define Gpio_TLE6240_PIN_3 201 +#define Gpio_TLE6240_PIN_4 202 +#define Gpio_TLE6240_PIN_5 203 +#define Gpio_TLE6240_PIN_6 204 +#define Gpio_TLE6240_PIN_7 205 +#define Gpio_TLE6240_PIN_8 206 +#define Gpio_TLE6240_PIN_9 207 +#define Gpio_TLE8888_PIN_1 168 +#define Gpio_TLE8888_PIN_10 177 +#define Gpio_TLE8888_PIN_11 178 +#define Gpio_TLE8888_PIN_12 179 +#define Gpio_TLE8888_PIN_13 180 +#define Gpio_TLE8888_PIN_14 181 +#define Gpio_TLE8888_PIN_15 182 +#define Gpio_TLE8888_PIN_16 183 +#define Gpio_TLE8888_PIN_17 184 +#define Gpio_TLE8888_PIN_18 185 +#define Gpio_TLE8888_PIN_19 186 +#define Gpio_TLE8888_PIN_2 169 +#define Gpio_TLE8888_PIN_20 187 +#define Gpio_TLE8888_PIN_21 188 +#define Gpio_TLE8888_PIN_22 189 +#define Gpio_TLE8888_PIN_23 190 +#define Gpio_TLE8888_PIN_24 191 +#define Gpio_TLE8888_PIN_25 192 +#define Gpio_TLE8888_PIN_26 193 +#define Gpio_TLE8888_PIN_27 194 +#define Gpio_TLE8888_PIN_28 195 +#define Gpio_TLE8888_PIN_3 170 +#define Gpio_TLE8888_PIN_4 171 +#define Gpio_TLE8888_PIN_5 172 +#define Gpio_TLE8888_PIN_6 173 +#define Gpio_TLE8888_PIN_7 174 +#define Gpio_TLE8888_PIN_8 175 +#define Gpio_TLE8888_PIN_9 176 +#define Gpio_TLE8888_PIN_KEY 197 +#define Gpio_TLE8888_PIN_MR 196 +#define Gpio_TLE8888_PIN_WAKE 198 +#define Gpio_Unassigned 0 +#define gppwm_channel_e_auto_enum 0="GPPWM_Zero",9="GPPWM_AccelPedal",16="GPPWM_AuxLinear1",17="GPPWM_AuxLinear2",7="GPPWM_AuxTemp1",8="GPPWM_AuxTemp2",3="GPPWM_Clt",25="GPPWM_DetectedGear",15="GPPWM_EthanolPercent",5="GPPWM_FuelLoad",18="GPPWM_GppwmOutput1",19="GPPWM_GppwmOutput2",20="GPPWM_GppwmOutput3",21="GPPWM_GppwmOutput4",4="GPPWM_Iat",6="GPPWM_IgnLoad",22="GPPWM_LuaGauge1",23="GPPWM_LuaGauge2",2="GPPWM_Map",24="GPPWM_Rpm",1="GPPWM_Tps",12="GPPWM_VVT_1E",11="GPPWM_VVT_1I",14="GPPWM_VVT_2E",13="GPPWM_VVT_2I",10="GPPWM_Vbatt" +#define gppwm_channel_e_enum "Zero", "TPS", "MAP", "CLT", "IAT", "Fuel Load", "Ignition Load", "Aux Temp 1", "Aux Temp 2", "Accel Pedal", "Battery Voltage", "VVT 1 I", "VVT 1 E", "VVT 2 I", "VVT 2 E", "Ethanol (Flex) %", "Aux Linear 1", "Aux Linear 2", "GPPWM Output 1", "GPPWM Output 2", "GPPWM Output 3", "GPPWM Output 4", "Lua Gauge 1", "Lua Gauge 2", "RPM", "Gear (detected)" +#define gppwm_channel_e_GPPWM_AccelPedal 9 +#define gppwm_channel_e_GPPWM_AuxLinear1 16 +#define gppwm_channel_e_GPPWM_AuxLinear2 17 +#define gppwm_channel_e_GPPWM_AuxTemp1 7 +#define gppwm_channel_e_GPPWM_AuxTemp2 8 +#define gppwm_channel_e_GPPWM_Clt 3 +#define gppwm_channel_e_GPPWM_DetectedGear 25 +#define gppwm_channel_e_GPPWM_EthanolPercent 15 +#define gppwm_channel_e_GPPWM_FuelLoad 5 +#define gppwm_channel_e_GPPWM_GppwmOutput1 18 +#define gppwm_channel_e_GPPWM_GppwmOutput2 19 +#define gppwm_channel_e_GPPWM_GppwmOutput3 20 +#define gppwm_channel_e_GPPWM_GppwmOutput4 21 +#define gppwm_channel_e_GPPWM_Iat 4 +#define gppwm_channel_e_GPPWM_IgnLoad 6 +#define gppwm_channel_e_GPPWM_LuaGauge1 22 +#define gppwm_channel_e_GPPWM_LuaGauge2 23 +#define gppwm_channel_e_GPPWM_Map 2 +#define gppwm_channel_e_GPPWM_Rpm 24 +#define gppwm_channel_e_GPPWM_Tps 1 +#define gppwm_channel_e_GPPWM_Vbatt 10 +#define gppwm_channel_e_GPPWM_VVT_1E 12 +#define gppwm_channel_e_GPPWM_VVT_1I 11 +#define gppwm_channel_e_GPPWM_VVT_2E 14 +#define gppwm_channel_e_GPPWM_VVT_2I 13 +#define gppwm_channel_e_GPPWM_Zero 0 +#define gppwm_channel_size 108 +#define GPPWM_CHANNELS 4 +#define gppwm_compare_mode_e_GPPWM_GreaterThan 0 +#define gppwm_compare_mode_e_GPPWM_LessThan 1 +#define GPPWM_LOAD_COUNT 8 +#define GPPWM_NOTE_SIZE 16 +#define GPPWM_RPM_COUNT 8 +#define HIGH_SPEED_COUNT 32 +#define hpfp_cam_e_auto_enum 0="HPFP_CAM_NONE",2="HPFP_CAM_EX1",4="HPFP_CAM_EX2",1="HPFP_CAM_IN1",3="HPFP_CAM_IN2" +#define hpfp_cam_e_enum "NONE", "Intake 1", "Exhaust 1", "Intake 2", "Exhaust 2" +#define hpfp_cam_e_HPFP_CAM_EX1 2 +#define hpfp_cam_e_HPFP_CAM_EX2 4 +#define hpfp_cam_e_HPFP_CAM_IN1 1 +#define hpfp_cam_e_HPFP_CAM_IN2 3 +#define hpfp_cam_e_HPFP_CAM_NONE 0 +#define HPFP_COMPENSATION_SIZE 10 +#define HPFP_DEADTIME_SIZE 8 +#define HPFP_LOBE_PROFILE_SIZE 16 +#define HPFP_TARGET_SIZE 10 +#define HW_MAX_ADC_INDEX 17 +#define IAC_PID_MULT_SIZE 8 +#define IAT_CURVE_SIZE 16 +#define IDLE_ADVANCE_CURVE_SIZE 8 +#define idle_hardware_s_size 12 +#define idle_mode_e_auto_enum 0="IM_AUTO",1="IM_MANUAL" +#define idle_mode_e_IM_AUTO 0 +#define idle_mode_e_IM_MANUAL 1 +#define idle_state_e_BLIP 64 +#define idle_state_e_INIT 0 +#define idle_state_e_PID_UPPER 16 +#define idle_state_e_PID_VALUE 4 +#define idle_state_e_RPM_DEAD_ZONE 2 +#define idle_state_e_TPS_THRESHOLD 1 +#define IDLE_VE_SIZE 4 +#define IGN_BLEND_COUNT 4 +#define IGN_LOAD_COUNT 16 +#define IGN_RPM_COUNT 16 +#define ignition_mode_e_auto_enum 0="IM_ONE_COIL",1="IM_INDIVIDUAL_COILS",3="IM_TWO_COILS",2="IM_WASTED_SPARK" +#define ignition_mode_e_IM_INDIVIDUAL_COILS 1 +#define ignition_mode_e_IM_ONE_COIL 0 +#define ignition_mode_e_IM_TWO_COILS 3 +#define ignition_mode_e_IM_WASTED_SPARK 2 +#define IGNITION_OUTPUT "Ignition Output" +#define imu_type_e_auto_enum 0="IMU_NONE",2="IMU_MM5_10",3="IMU_TYPE_3",4="IMU_TYPE_4",5="IMU_TYPE_MB_A0065422618",1="IMU_VAG" +#define imu_type_e_IMU_MM5_10 2 +#define imu_type_e_IMU_NONE 0 +#define imu_type_e_IMU_TYPE_3 3 +#define imu_type_e_IMU_TYPE_4 4 +#define imu_type_e_IMU_TYPE_MB_A0065422618 5 +#define imu_type_e_IMU_VAG 1 +#define INDICATOR_NAME_AC_SWITCH "AC switch" +#define INDICATOR_NAME_BRAKE_DOWN "Brake switch" +#define INDICATOR_NAME_CLUTCH_DOWN "Clutch: down" +#define INDICATOR_NAME_CLUTCH_UP "Clutch: up" +#define injection_mode_e_auto_enum 0="IM_SIMULTANEOUS",2="IM_BATCH",1="IM_SEQUENTIAL",3="IM_SINGLE_POINT" +#define injection_mode_e_IM_BATCH 2 +#define injection_mode_e_IM_SEQUENTIAL 1 +#define injection_mode_e_IM_SIMULTANEOUS 0 +#define injection_mode_e_IM_SINGLE_POINT 3 +#define InjectionTimingMode_auto_enum 0="End",2="Center",1="Start" +#define InjectionTimingMode_Center 2 +#define InjectionTimingMode_End 0 +#define InjectionTimingMode_Start 1 +#define injector_compensation_mode_e_auto_enum 0="ICM_None",1="ICM_FixedRailPressure",2="ICM_SensedRailPressure" +#define injector_compensation_mode_e_ICM_FixedRailPressure 1 +#define injector_compensation_mode_e_ICM_None 0 +#define injector_compensation_mode_e_ICM_SensedRailPressure 2 +#define injector_pressure_type_e_auto_enum 0="IPT_Low",1="IPT_High" +#define injector_pressure_type_e_IPT_High 1 +#define injector_pressure_type_e_IPT_Low 0 +#define injector_s_size 68 +#define InjectorNonlinearMode_auto_enum 0="INJ_None",2="INJ_FordModel",1="INJ_PolynomialAdder" +#define InjectorNonlinearMode_INJ_FordModel 2 +#define InjectorNonlinearMode_INJ_None 0 +#define InjectorNonlinearMode_INJ_PolynomialAdder 1 +#define launchActivationMode_e_ALWAYS_ACTIVE_LAUNCH 2 +#define launchActivationMode_e_auto_enum 0="SWITCH_INPUT_LAUNCH",2="ALWAYS_ACTIVE_LAUNCH",1="CLUTCH_INPUT_LAUNCH" +#define launchActivationMode_e_CLUTCH_INPUT_LAUNCH 1 +#define launchActivationMode_e_enum "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)" +#define launchActivationMode_e_SWITCH_INPUT_LAUNCH 0 +#define linear_sensor_s_size 20 +#define load_override_e_AFR_AccPedal 3 +#define load_override_e_AFR_CylFilling 4 +#define load_override_e_AFR_MAP 1 +#define load_override_e_AFR_None 0 +#define load_override_e_AFR_Tps 2 +#define load_override_e_auto_enum 0="AFR_None",3="AFR_AccPedal",4="AFR_CylFilling",1="AFR_MAP",2="AFR_Tps" +#define load_override_e_enum "None", "MAP", "TPS", "Acc Pedal", "Cyl Filling %" +#define LOG_DELIMITER "`" +#define LOGIC_ANALYZER_CHANNEL_COUNT 4 +#define LUA_ANALOG_INPUT_COUNT 8 +#define LUA_DIGITAL_INPUT_COUNT 8 +#define LUA_GAUGE_COUNT 2 +#define LUA_PWM_COUNT 8 +#define LUA_SCRIPT_SIZE 8000 +#define MAF_DECODING_COUNT 256 +#define maf_sensor_type_e_auto_enum 0="CUSTOM",2="Bosch0280218004",1="Bosch0280218037",3="DensoTODO" +#define maf_sensor_type_e_Bosch0280218004 2 +#define maf_sensor_type_e_Bosch0280218037 1 +#define maf_sensor_type_e_CUSTOM 0 +#define maf_sensor_type_e_DensoTODO 3 +#define maf_sensor_type_e_enum "v0", "v1", "v2", "v3" +#define MAIN_HELP_URL "http://www.rusefi.com/" +#define MAP_ANGLE_SIZE 8 +#define MAP_sensor_config_s_size 140 +#define MAP_WINDOW_SIZE 8 +#define MAX_CYLINDER_COUNT 12 +#define MLQ_FIELD_HEADER_SIZE 89 +#define MLQ_HEADER_SIZE 24 +#define NARROW_BAND_WIDE_BAND_CONVERSION_SIZE 8 +#define operation_mode_e_FOUR_STROKE_CAM_SENSOR 2 +#define operation_mode_e_FOUR_STROKE_CRANK_SENSOR 1 +#define operation_mode_e_FOUR_STROKE_SYMMETRICAL_CRANK_SENSOR 4 +#define operation_mode_e_FOUR_STROKE_THREE_TIMES_CRANK_SENSOR 5 +#define operation_mode_e_FOUR_STROKE_TWELVE_TIMES_CRANK_SENSOR 6 +#define operation_mode_e_OM_NONE 0 +#define operation_mode_e_TWO_STROKE 3 +#define output_pin_e_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "MC33972_1", "MC33972_2", "MC33972_3", "MC33972_4", "MC33972_5", "MC33972_6", "MC33972_7", "MC33972_8", "MC33972_9", "MC33972_10", "MC33972_11", "MC33972_12", "MC33972_13", "MC33972_14", "MC33972_15", "MC33972_16", "MC33972_17", "MC33972_18", "MC33972_19", "MC33972_20", "MC33972_21", "MC33972_22", "TLE8888_1", "TLE8888_2", "TLE8888_3", "TLE8888_4", "TLE8888_5", "TLE8888_6", "TLE8888_7", "TLE8888_8", "TLE8888_9", "TLE8888_10", "TLE8888_11", "TLE8888_12", "TLE8888_13", "TLE8888_14", "TLE8888_15", "TLE8888_16", "TLE8888_17", "TLE8888_18", "TLE8888_19", "TLE8888_20", "TLE8888_21", "TLE8888_22", "TLE8888_23", "TLE8888_24", "TLE8888_25", "TLE8888_26", "TLE8888_27", "TLE8888_28", "INVALID", "INVALID", "INVALID", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16", "L215", "L216", "L217", "L218", "L219", "L220", "L221", "L222", "L223", "L224", "L225", "L226", "L227", "L228", "L229", "L230", "L231", "L232", "L233", "L234", "L235", "L236", "L237", "L238", "L239", "L240", "L241", "L242", "L243", "L244", "L245", "L246", "L247", "L248", "can0", "can1", "can2", "can3", "can4", "can5", "can6", "can7", "protected_0", "protected_1", "protected_2", "protected_3", "protected_4", "protected_5", "protected_6", "protected_7", "protected_8", "protected_9", "protected_10", "protected_11", "protected_12", "protected_13", "protected_14", "protected_15", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "MC33810_0_OUT_0", "MC33810_0_OUT_1", "MC33810_0_OUT_2", "MC33810_0_OUT_3", "MC33810_0_GD_0", "MC33810_0_GD_1", "MC33810_0_GD_2", "MC33810_0_GD_3" +#define output_pin_e_fullenum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "MC33972_1", "MC33972_2", "MC33972_3", "MC33972_4", "MC33972_5", "MC33972_6", "MC33972_7", "MC33972_8", "MC33972_9", "MC33972_10", "MC33972_11", "MC33972_12", "MC33972_13", "MC33972_14", "MC33972_15", "MC33972_16", "MC33972_17", "MC33972_18", "MC33972_19", "MC33972_20", "MC33972_21", "MC33972_22", "TLE8888_1", "TLE8888_2", "TLE8888_3", "TLE8888_4", "TLE8888_5", "TLE8888_6", "TLE8888_7", "TLE8888_8", "TLE8888_9", "TLE8888_10", "TLE8888_11", "TLE8888_12", "TLE8888_13", "TLE8888_14", "TLE8888_15", "TLE8888_16", "TLE8888_17", "TLE8888_18", "TLE8888_19", "TLE8888_20", "TLE8888_21", "TLE8888_22", "TLE8888_23", "TLE8888_24", "TLE8888_25", "TLE8888_26", "TLE8888_27", "TLE8888_28", "INVALID", "INVALID", "INVALID", "TLE6240_1", "TLE6240_2", "TLE6240_3", "TLE6240_4", "TLE6240_5", "TLE6240_6", "TLE6240_7", "TLE6240_8", "TLE6240_9", "TLE6240_10", "TLE6240_11", "TLE6240_12", "TLE6240_13", "TLE6240_14", "TLE6240_15", "TLE6240_16", "L215", "L216", "L217", "L218", "L219", "L220", "L221", "L222", "L223", "L224", "L225", "L226", "L227", "L228", "L229", "L230", "L231", "L232", "L233", "L234", "L235", "L236", "L237", "L238", "L239", "L240", "L241", "L242", "L243", "L244", "L245", "L246", "L247", "L248", "can0", "can1", "can2", "can3", "can4", "can5", "can6", "can7", "protected_0", "protected_1", "protected_2", "protected_3", "protected_4", "protected_5", "protected_6", "protected_7", "protected_8", "protected_9", "protected_10", "protected_11", "protected_12", "protected_13", "protected_14", "protected_15", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "MC33810_0_OUT_0", "MC33810_0_OUT_1", "MC33810_0_OUT_2", "MC33810_0_OUT_3", "MC33810_0_GD_0", "MC33810_0_GD_1", "MC33810_0_GD_2", "MC33810_0_GD_3" +#define PACK_ADD_TEMPERATURE 40 +#define PACK_MULT_AFR 1000 +#define PACK_MULT_AFR_CFG 10 +#define PACK_MULT_ANGLE 50 +#define PACK_MULT_FLEX 2 +#define PACK_MULT_FUEL_FLOW 200 +#define PACK_MULT_FUEL_MASS 100 +#define PACK_MULT_HIGH_PRESSURE 10 +#define PACK_MULT_LAMBDA 10000 +#define PACK_MULT_LAMBDA_CFG 147 +#define PACK_MULT_MASS_FLOW 10 +#define PACK_MULT_MS 300 +#define PACK_MULT_PERCENT 100 +#define PACK_MULT_PRESSURE 30 +#define PACK_MULT_TEMPERATURE 100 +#define PACK_MULT_VOLTAGE 1000 +#define PACK_MULT_VSS 100 +#define PACK_PERCENT_BYTE_MULT 100.0 +#define PEDAL_TO_TPS_SIZE 8 +#define PERCENT_TRIM_BYTE_PACKING_DIV 0.02 +#define persistent_config_s_size 23880 +#define pid_s_size 20 +#define pin_input_mode_e_auto_enum 0="PI_DEFAULT",2="PI_PULLDOWN",1="PI_PULLUP" +#define pin_input_mode_e_enum "DEFAULT", "PULLUP", "PULLDOWN" +#define pin_input_mode_e_PI_DEFAULT 0 +#define pin_input_mode_e_PI_PULLDOWN 2 +#define pin_input_mode_e_PI_PULLUP 1 +#define pin_mode_e_enum "default", "INVALID", "INVALID", "INVALID", "opendrain", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLUP", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "PULLDOWN" +#define pin_output_mode_e_auto_enum 0="OM_DEFAULT",1="OM_INVERTED",2="OM_OPENDRAIN",3="OM_OPENDRAIN_INVERTED" +#define pin_output_mode_e_enum "default", "default inverted", "open collector", "open collector inverted" +#define pin_output_mode_e_OM_DEFAULT 0 +#define pin_output_mode_e_OM_INVERTED 1 +#define pin_output_mode_e_OM_OPENDRAIN 2 +#define pin_output_mode_e_OM_OPENDRAIN_INVERTED 3 +#define PRIME_CURVE_COUNT 8 +#define PROTOCOL_ACR_NAME "acr" +#define PROTOCOL_ANALOG_CHART "analog_chart" +#define PROTOCOL_COIL1_SHORT_NAME "c1" +#define PROTOCOL_CRANK1 "t1" +#define PROTOCOL_CRANK2 "t2" +#define PROTOCOL_ENGINE_SNIFFER "wave_chart" +#define PROTOCOL_ES_DOWN "d" +#define PROTOCOL_ES_UP "u" +#define PROTOCOL_HELLO_PREFIX "***" +#define PROTOCOL_HIP_NAME "HIP" +#define PROTOCOL_HPFP_NAME "hpfp" +#define PROTOCOL_INJ1_SHORT_NAME "i1" +#define PROTOCOL_MSG "msg" +#define PROTOCOL_OUTPIN "outpin" +#define PROTOCOL_SIGNATURE_PREFIX "rusEFI " +#define PROTOCOL_TACH_NAME "tach" +#define PROTOCOL_TEST_RESPONSE_TAG "ts_p_alive" +#define PROTOCOL_VERSION_TAG "rusEfiVersion" +#define PROTOCOL_VVT1_NAME "VVT1" +#define PROTOCOL_VVT2_NAME "VVT2" +#define PROTOCOL_VVT3_NAME "VVT3" +#define PROTOCOL_VVT4_NAME "VVT4" +#define PROTOCOL_WA_CHANNEL_1 "input1" +#define PROTOCOL_WA_CHANNEL_2 "input2" +#define PROTOCOL_WA_CHANNEL_3 "input3" +#define PROTOCOL_WA_CHANNEL_4 "input4" +#define RANGE_INPUT_COUNT 6 +#define SCRIPT_CURVE_16 16 +#define SCRIPT_CURVE_8 8 +#define SCRIPT_CURVE_COUNT 6 +#define SCRIPT_SETTING_COUNT 8 +#define SCRIPT_TABLE_8 8 +#define SCRIPT_TABLE_COUNT 4 +#define SelectedGear_Drive 6 +#define SelectedGear_Invalid 0 +#define SelectedGear_Low 11 +#define SelectedGear_Manual 7 +#define SelectedGear_Manual1 10 +#define SelectedGear_Manual2 9 +#define SelectedGear_Manual3 8 +#define SelectedGear_ManualMinus 2 +#define SelectedGear_ManualPlus 1 +#define SelectedGear_Neutral 5 +#define SelectedGear_Park 3 +#define SelectedGear_Reverse 4 +#define sensor_chart_e_auto_enum 0="SC_OFF",5="SC_AUX_FAST1",4="SC_DETAILED_RPM",3="SC_RPM_ACCEL",1="SC_TRIGGER" +#define sensor_chart_e_enum "none", "trigger", "INVALID", "RPM ACCEL", "DETAILED RPM", "Fast Aux1" +#define sensor_chart_e_SC_AUX_FAST1 5 +#define sensor_chart_e_SC_DETAILED_RPM 4 +#define sensor_chart_e_SC_OFF 0 +#define sensor_chart_e_SC_RPM_ACCEL 3 +#define sensor_chart_e_SC_TRIGGER 1 +#define SENT_INPUT_COUNT 1 +#define sent_input_pin_e_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define SentEtbType_auto_enum 0="NONE",3="CUSTOM",2="FORD_TYPE_1",1="GM_TYPE_1" +#define SentEtbType_CUSTOM 3 +#define SentEtbType_enum "None", "GM type 1", "Ford type 1", "Custom" +#define SentEtbType_FORD_TYPE_1 2 +#define SentEtbType_GM_TYPE_1 1 +#define SentEtbType_NONE 0 +#define show_Frankenso_presets true +#define show_test_presets true +#define SIGNATURE_HASH 2192944932 +#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" +#define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" +#define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" +#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" +#define spi_device_e_SPI_DEVICE_1 1 +#define spi_device_e_SPI_DEVICE_2 2 +#define spi_device_e_SPI_DEVICE_3 3 +#define spi_device_e_SPI_DEVICE_4 4 +#define spi_device_e_SPI_NONE 0 +#define spi_speed_e__150KHz 3 +#define spi_speed_e__1_25MHz 2 +#define spi_speed_e__2_5MHz 1 +#define spi_speed_e__5MHz 0 +#define stepper_num_micro_steps_e_auto_enum 0="STEPPER_FULL",8="STEPPER_EIGHTH",4="STEPPER_FOURTH",2="STEPPER_HALF" +#define stepper_num_micro_steps_e_enum "Full-Step (Default)", "INVALID", "Half-Step", "INVALID", "1/4 Micro-Step", "INVALID", "INVALID", "INVALID", "1/8 Micro-Step" +#define stepper_num_micro_steps_e_STEPPER_EIGHTH 8 +#define stepper_num_micro_steps_e_STEPPER_FOURTH 4 +#define stepper_num_micro_steps_e_STEPPER_FULL 0 +#define stepper_num_micro_steps_e_STEPPER_HALF 2 +#define STFT_BANK_COUNT 2 +#define stft_cell_cfg_s_size 4 +#define STFT_CELL_COUNT 4 +#define stft_s_size 24 +#define switch_input_pin_e_enum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define switch_input_pin_e_fullenum "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" +#define TABLE_4_RPM 10 +#define tChargeMode_e_auto_enum 0="TCHARGE_MODE_RPM_TPS",1="TCHARGE_MODE_AIR_INTERP",2="TCHARGE_MODE_AIR_INTERP_TABLE" +#define tChargeMode_e_enum "RPM+TPS (Default)", "Air Mass Interpolation", "Table" +#define tChargeMode_e_TCHARGE_MODE_AIR_INTERP 1 +#define tChargeMode_e_TCHARGE_MODE_AIR_INTERP_TABLE 2 +#define tChargeMode_e_TCHARGE_MODE_RPM_TPS 0 +#define TCU_GEAR_COUNT 10 +#define TCU_MAGIC_SIZE 8 +#define TCU_SOLENOID_COUNT 6 +#define thermistor_conf_s_size 28 +#define ThermistorConf_size 32 +#define timing_mode_e_auto_enum 0="TM_DYNAMIC",1="TM_FIXED" +#define timing_mode_e_TM_DYNAMIC 0 +#define timing_mode_e_TM_FIXED 1 +#define tle8888_mode_e_auto_enum 0="TL_AUTO",3="TL_HALL",2="TL_MANUAL",1="TL_SEMI_AUTO" +#define tle8888_mode_e_TL_AUTO 0 +#define tle8888_mode_e_TL_HALL 3 +#define tle8888_mode_e_TL_MANUAL 2 +#define tle8888_mode_e_TL_SEMI_AUTO 1 +#define TOOTH_DATA_LENGTH 2000 +#define TOOTH_PACKET_COUNT 1000 +#define TOOTH_PACKET_SIZE 2 +#define TOP_DEAD_CENTER_MESSAGE "r" +#define TORQUE_CURVE_SIZE 6 +#define TOTAL_CONFIG_SIZE 23880 +#define TPS_2_BYTE_PACKING_MULT 100 +#define TPS_TPS_ACCEL_CLT_CORR_TABLE 4 +#define TPS_TPS_ACCEL_TABLE 8 +#define transmission_controller_e_enum "None", "Simple Transmission", "GM 4L6X" +#define TransmissionControllerMode_auto_enum 0="None",2="Gm4l6x",1="SimpleTransmissionController" +#define TransmissionControllerMode_Gm4l6x 2 +#define TransmissionControllerMode_None 0 +#define TransmissionControllerMode_SimpleTransmissionController 1 +#define TRIGGER_COMMENT "#" +#define trigger_config_s_size 12 +#define TRIGGER_CRANK_BASED trigger_type == 2 || trigger_type == 5 || trigger_type == 10 || trigger_type == 12 || trigger_type == 20 || trigger_type == 21 || trigger_type == 26 || trigger_type == 27 || trigger_type == 33 || trigger_type == 38 || trigger_type == 39 || trigger_type == 44 || trigger_type == 45 || trigger_type == 46 || trigger_type == 53 || trigger_type == 55 || trigger_type == 57 || trigger_type == 58 || trigger_type == 61 || trigger_type == 62 || trigger_type == 68 || trigger_type == 70 || trigger_type == 71 || trigger_type == 72 || trigger_type == 74 || trigger_type == 75 || trigger_type == 76 || trigger_type == 77 +#define TRIGGER_CYCLE_DURATION "cycleDuration" +#define TRIGGER_GAP_FROM "gapFrom" +#define TRIGGER_GAP_TO "gapTo" +#define TRIGGER_GAPS_COUNT "gapsCount" +#define TRIGGER_HAS_SECOND_CHANNEL "hasSecondChannel" +#define TRIGGER_INPUT_PIN_COUNT 2 +#define TRIGGER_IS_CRANK_KEY "crankBased" +#define TRIGGER_IS_SECOND_WHEEL_CAM "isSecondWheelCam" +#define TRIGGER_KNOWN_OPERATION_MODE "knownOperationMode" +#define TRIGGER_SIMULATOR_PIN_COUNT 2 +#define TRIGGER_SYNC_EDGE "syncEdge" +#define trigger_type_e_auto_enum 0="TT_TOOTHED_WHEEL",38="TT_12_TOOTH_CRANK",50="TT_1_16",25="TT_2JZ_3_34_SIMULATION_ONLY",70="TT_36_2_1",71="TT_36_2_1_1",23="TT_36_2_2_2",31="TT_3_1_CAM",77="TT_60DEG_TOOTH",75="TT_60_2_2_F3R",20="TT_60_2_VW",21="TT_BENELLI_TRE",30="TT_CHRYSLER_NGC_36_2_2",6="TT_DAIHATSU",2="TT_DODGE_NEON_1995",39="TT_DODGE_NEON_1995_ONLY_CRANK",14="TT_DODGE_NEON_2003_CAM",32="TT_DODGE_NEON_2003_CRANK",19="TT_DODGE_RAM",22="TT_DODGE_STRATUS",41="TT_FIAT_IAW_P8",1="TT_FORD_ASPIRE",42="TT_FORD_ST170",65="TT_FORD_TFI_PIP",27="TT_GM_24x",74="TT_GM_24x_2",54="TT_GM_60_2_2_2",5="TT_GM_7X",18="TT_HALF_MOON",28="TT_HONDA_CBR_600",67="TT_HONDA_K_CAM_4_1",46="TT_HONDA_K_CRANK_12_1",37="TT_JEEP_18_2_2_2",40="TT_JEEP_4_CYL",57="TT_KAWA_KX450F",15="TT_MAZDA_DOHC_1_4",3="TT_MAZDA_MIATA_NA",35="TT_MAZDA_MIATA_VVT_TEST",7="TT_MAZDA_SOHC_4",10="TT_MERCEDES_2_SEGMENT",33="TT_MIATA_VVT",34="TT_MITSU_4G63_CAM",76="TT_MITSU_4G63_CRANK",29="TT_MITSU_4G9x_CAM",11="TT_NARROW_SINGLE_TOOTH",52="TT_NISSAN_MR18_CAM_VVT",68="TT_NISSAN_MR18_CRANK",61="TT_NISSAN_QR25",24="TT_NISSAN_SR20VE",60="TT_NISSAN_VQ30",58="TT_NISSAN_VQ35",16="TT_ONE_PLUS_ONE",44="TT_RENIX_44_2_2",45="TT_RENIX_66_2_2_2",26="TT_ROVER_K",55="TT_SKODA_FAVORIT",36="TT_SUBARU_7_6",51="TT_SUBARU_7_WITHOUT_6",12="TT_SUBARU_EZ30",49="TT_SUBARU_SVX",64="TT_SUBARU_SVX_CAM_VVT",63="TT_SUBARU_SVX_CRANK_1",66="TT_SUZUKI_G13B",69="TT_TOOTHED_WHEEL_32_2",9="TT_TOOTHED_WHEEL_36_1",48="TT_TOOTHED_WHEEL_36_2",8="TT_TOOTHED_WHEEL_60_2",53="TT_TRI_TACH",80="TT_UNUSED",56="TT_VVT_BARRA_3_PLUS_1",47="TT_VVT_BOSCH_QUICK_START",4="TT_VVT_FORD_COYOTE",13="TT_VVT_MAZDA_SKYACTIV",43="TT_VVT_MIATA_NB",62="TT_VVT_MITSUBISHI_3A92",78="TT_VVT_MITSUBISHI_4G69",79="TT_VVT_MITSU_6G72",59="TT_VVT_NISSAN_VQ35",17="TT_VVT_TOYOTA_3_TOOTH",73="TT_VVT_TOYOTA_4_1",72="UNUSED72" +#define trigger_type_e_enum "custom toothed wheel", "Ford Aspire", "Dodge Neon 1995", "Miata NA", "INVALID", "GM_7X", "Cooper R50", "Mazda SOHC 4", "60/2", "36/1", "Mercedes Two Segment", "Single Tooth", "EZ30", "INVALID", "Dodge Neon 2003", "Mazda DOHC 1+4", "1+1", "INVALID", "Half Moon", "Dodge Ram 1+16", "60/2 VW", "Benelli Tre", "Dodge Stratus", "36_2_2_2", "Nissan Primera", "dev 2JZ 3/34 simulator", "Rover K", "GM 24x 5 degree", "Honda CBR 600", "Mitsubishi 4G92/93/94 Cam 29", "Honda CBR 600 custom", "3/1 skipped", "Dodge Neon 2003 crank", "Miata NB", "Mitsubishi 4G63 Cam 34", "INVALID", "Subaru 7+6", "Jeep 18-2-2-2", "12 tooth crank", "Dodge Neon 1995 crank only", "Jeep XJ 4 cyl", "FiatIAQ_P8", "Mazda Z5", "INVALID", "Renix 44-2-2", "Renix 66-2-2-2", "Honda K 12+1", "INVALID", "36/2", "Subaru SVX", "1+16", "Subaru 7 without 6", "INVALID", "TriTach", "GM 60/2/2/2", "Skoda Favorit", "Barra 3+1 Cam", "Kawa KX450F", "Nissan VQ35", "INVALID", "Nissan VQ30", "Nissan QR25", "INVALID", "Subaru SVX Crank 1", "Subaru SVX Cam VVT", "Ford PIP", "Suzuki G13B", "Honda K 4+1", "Nissan MR18 Crank", "32/2", "36-2-1", "36-2-1-1", "INVALID", "INVALID", "GM 24x 3 degree", "60-2-2 F3R", "Mitsu 4G63 Crank", "x2 30 Deg camshaft BTDC", "INVALID", "Mitsu 6G72 Cam", "trg80", "trg81" +#define trigger_type_e_TT_12_TOOTH_CRANK 38 +#define trigger_type_e_TT_1_16 50 +#define trigger_type_e_TT_2JZ_3_34_SIMULATION_ONLY 25 +#define trigger_type_e_TT_36_2_1 70 +#define trigger_type_e_TT_36_2_1_1 71 +#define trigger_type_e_TT_36_2_2_2 23 +#define trigger_type_e_TT_3_1_CAM 31 +#define trigger_type_e_TT_60_2_2_F3R 75 +#define trigger_type_e_TT_60_2_VW 20 +#define trigger_type_e_TT_60DEG_TOOTH 77 +#define trigger_type_e_TT_BENELLI_TRE 21 +#define trigger_type_e_TT_CHRYSLER_NGC_36_2_2 30 +#define trigger_type_e_TT_DAIHATSU 6 +#define trigger_type_e_TT_DODGE_NEON_1995 2 +#define trigger_type_e_TT_DODGE_NEON_1995_ONLY_CRANK 39 +#define trigger_type_e_TT_DODGE_NEON_2003_CAM 14 +#define trigger_type_e_TT_DODGE_NEON_2003_CRANK 32 +#define trigger_type_e_TT_DODGE_RAM 19 +#define trigger_type_e_TT_DODGE_STRATUS 22 +#define trigger_type_e_TT_FIAT_IAW_P8 41 +#define trigger_type_e_TT_FORD_ASPIRE 1 +#define trigger_type_e_TT_FORD_ST170 42 +#define trigger_type_e_TT_FORD_TFI_PIP 65 +#define trigger_type_e_TT_GM_24x 27 +#define trigger_type_e_TT_GM_24x_2 74 +#define trigger_type_e_TT_GM_60_2_2_2 54 +#define trigger_type_e_TT_GM_7X 5 +#define trigger_type_e_TT_HALF_MOON 18 +#define trigger_type_e_TT_HONDA_CBR_600 28 +#define trigger_type_e_TT_HONDA_K_CAM_4_1 67 +#define trigger_type_e_TT_HONDA_K_CRANK_12_1 46 +#define trigger_type_e_TT_JEEP_18_2_2_2 37 +#define trigger_type_e_TT_JEEP_4_CYL 40 +#define trigger_type_e_TT_KAWA_KX450F 57 +#define trigger_type_e_TT_MAZDA_DOHC_1_4 15 +#define trigger_type_e_TT_MAZDA_MIATA_NA 3 +#define trigger_type_e_TT_MAZDA_MIATA_VVT_TEST 35 +#define trigger_type_e_TT_MAZDA_SOHC_4 7 +#define trigger_type_e_TT_MERCEDES_2_SEGMENT 10 +#define trigger_type_e_TT_MIATA_VVT 33 +#define trigger_type_e_TT_MITSU_4G63_CAM 34 +#define trigger_type_e_TT_MITSU_4G63_CRANK 76 +#define trigger_type_e_TT_MITSU_4G9x_CAM 29 +#define trigger_type_e_TT_NARROW_SINGLE_TOOTH 11 +#define trigger_type_e_TT_NISSAN_MR18_CAM_VVT 52 +#define trigger_type_e_TT_NISSAN_MR18_CRANK 68 +#define trigger_type_e_TT_NISSAN_QR25 61 +#define trigger_type_e_TT_NISSAN_SR20VE 24 +#define trigger_type_e_TT_NISSAN_VQ30 60 +#define trigger_type_e_TT_NISSAN_VQ35 58 +#define trigger_type_e_TT_ONE_PLUS_ONE 16 +#define trigger_type_e_TT_RENIX_44_2_2 44 +#define trigger_type_e_TT_RENIX_66_2_2_2 45 +#define trigger_type_e_TT_ROVER_K 26 +#define trigger_type_e_TT_SKODA_FAVORIT 55 +#define trigger_type_e_TT_SUBARU_7_6 36 +#define trigger_type_e_TT_SUBARU_7_WITHOUT_6 51 +#define trigger_type_e_TT_SUBARU_EZ30 12 +#define trigger_type_e_TT_SUBARU_SVX 49 +#define trigger_type_e_TT_SUBARU_SVX_CAM_VVT 64 +#define trigger_type_e_TT_SUBARU_SVX_CRANK_1 63 +#define trigger_type_e_TT_SUZUKI_G13B 66 +#define trigger_type_e_TT_TOOTHED_WHEEL 0 +#define trigger_type_e_TT_TOOTHED_WHEEL_32_2 69 +#define trigger_type_e_TT_TOOTHED_WHEEL_36_1 9 +#define trigger_type_e_TT_TOOTHED_WHEEL_36_2 48 +#define trigger_type_e_TT_TOOTHED_WHEEL_60_2 8 +#define trigger_type_e_TT_TRI_TACH 53 +#define trigger_type_e_TT_UNUSED 80 +#define trigger_type_e_TT_VVT_BARRA_3_PLUS_1 56 +#define trigger_type_e_TT_VVT_BOSCH_QUICK_START 47 +#define trigger_type_e_TT_VVT_FORD_COYOTE 4 +#define trigger_type_e_TT_VVT_MAZDA_SKYACTIV 13 +#define trigger_type_e_TT_VVT_MIATA_NB 43 +#define trigger_type_e_TT_VVT_MITSU_6G72 79 +#define trigger_type_e_TT_VVT_MITSUBISHI_3A92 62 +#define trigger_type_e_TT_VVT_MITSUBISHI_4G69 78 +#define trigger_type_e_TT_VVT_NISSAN_VQ35 59 +#define trigger_type_e_TT_VVT_TOYOTA_3_TOOTH 17 +#define trigger_type_e_TT_VVT_TOYOTA_4_1 73 +#define trigger_type_e_UNUSED72 72 +#define TRIGGER_TYPE_WITH_SECOND_WHEEL trigger_type == 1 || trigger_type == 3 || trigger_type == 15 || trigger_type == 16 || trigger_type == 19 || trigger_type == 25 || trigger_type == 28 || trigger_type == 31 || trigger_type == 35 || trigger_type == 36 || trigger_type == 37 || trigger_type == 40 || trigger_type == 49 || trigger_type == 50 || trigger_type == 53 || trigger_type == 54 || trigger_type == 63 || trigger_type == 64 +#define TRIGGER_TYPE_WITHOUT_KNOWN_LOCATION trigger_type == 8 || trigger_type == 9 || trigger_type == 11 || trigger_type == 17 || trigger_type == 18 || trigger_type == 23 || trigger_type == 48 || trigger_type == 69 || trigger_type == 73 +#define TRIGGER_WITH_SYNC "isSynchronizationNeeded" +#define TRIGGERS_FILE_NAME "triggers.txt" +#define TriggerWheel_T_PRIMARY 0 +#define TriggerWheel_T_SECONDARY 1 +#define TRIM_SIZE 4 +#define ts_14_command_TS_14_0 0 +#define ts_14_command_TS_14_1 1 +#define ts_14_command_TS_14_4 4 +#define ts_14_command_TS_14_5 5 +#define ts_14_command_TS_14_9 9 +#define ts_14_command_TS_ETB_RESET 0x0B +#define ts_14_command_TS_GRAB_PEDAL_UP 6 +#define ts_14_command_TS_GRAB_PEDAL_WOT 7 +#define ts_14_command_TS_GRAB_TPS_CLOSED 2 +#define ts_14_command_TS_GRAB_TPS_WOT 3 +#define ts_14_command_TS_RESET_TLE8888 8 +#define ts_14_command_TS_WRITE_FLASH 0x0A +#define TS_BLOCK_READ_TIMEOUT 3000 +#define TS_BURN_COMMAND 'B' +#define TS_BURN_COMMAND_char B +#define TS_CHUNK_WRITE_COMMAND 'C' +#define TS_CHUNK_WRITE_COMMAND_char C +#define ts_command_e_TS_BENCH_CATEGORY 22 +#define ts_command_e_TS_CLEAR_WARNINGS 17 +#define ts_command_e_TS_COMMAND_1 1 +#define ts_command_e_TS_COMMAND_10 10 +#define ts_command_e_TS_COMMAND_11 11 +#define ts_command_e_TS_COMMAND_12 12 +#define ts_command_e_TS_COMMAND_13 13 +#define ts_command_e_TS_COMMAND_14 14 +#define ts_command_e_TS_COMMAND_15 15 +#define ts_command_e_TS_COMMAND_16 16 +#define ts_command_e_TS_COMMAND_2 2 +#define ts_command_e_TS_COMMAND_3 3 +#define ts_command_e_TS_COMMAND_4 4 +#define ts_command_e_TS_COMMAND_5 5 +#define ts_command_e_TS_COMMAND_6 6 +#define ts_command_e_TS_COMMAND_7 7 +#define ts_command_e_TS_COMMAND_8 8 +#define ts_command_e_TS_COMMAND_9 9 +#define ts_command_e_TS_DEBUG_MODE 0 +#define ts_command_e_TS_IGNITION_CATEGORY 18 +#define ts_command_e_TS_INJECTOR_CATEGORY 19 +#define ts_command_e_TS_LUA_OUTPUT_CATEGORY 32 +#define ts_command_e_TS_SET_DEFAULT_ENGINE 31 +#define ts_command_e_TS_SET_ENGINE_TYPE 30 +#define ts_command_e_TS_SOLENOID_CATEGORY 25 +#define ts_command_e_TS_UNUSED_23 23 +#define ts_command_e_TS_UNUSED_24 24 +#define ts_command_e_TS_UNUSED_26 26 +#define ts_command_e_TS_UNUSED_27 27 +#define ts_command_e_TS_UNUSED_28 28 +#define ts_command_e_TS_UNUSED_29 29 +#define ts_command_e_TS_WIDEBAND 21 +#define ts_command_e_TS_X14 20 +#define TS_COMMAND_F 'F' +#define TS_COMMAND_F_char F +#define TS_COMPOSITE_DISABLE 2 +#define TS_COMPOSITE_ENABLE 1 +#define TS_COMPOSITE_READ 3 +#define TS_CRC_CHECK_COMMAND 'k' +#define TS_CRC_CHECK_COMMAND_char k +#define TS_EXECUTE 'E' +#define TS_EXECUTE_char E +#define TS_FILE_VERSION 20230721 +#define TS_FILE_VERSION_OFFSET 124 +#define TS_GET_COMPOSITE_BUFFER_DONE_DIFFERENTLY '8' +#define TS_GET_COMPOSITE_BUFFER_DONE_DIFFERENTLY_char 8 +#define TS_GET_CONFIG_ERROR 'e' +#define TS_GET_CONFIG_ERROR_char e +#define TS_GET_FIRMWARE_VERSION 'V' +#define TS_GET_FIRMWARE_VERSION_char V +#define TS_GET_OUTPUTS_SIZE '4' +#define TS_GET_OUTPUTS_SIZE_char 4 +#define TS_GET_PROTOCOL_VERSION_COMMAND_F 'F' +#define TS_GET_PROTOCOL_VERSION_COMMAND_F_char F +#define TS_GET_SCATTERED_GET_COMMAND '9' +#define TS_GET_SCATTERED_GET_COMMAND_char 9 +#define TS_GET_TEXT 'G' +#define TS_GET_TEXT_char G +#define TS_HELLO_COMMAND 'S' +#define TS_HELLO_COMMAND_char S +#define TS_IO_TEST_COMMAND 'Z' +#define TS_IO_TEST_COMMAND_char Z +#define TS_ONLINE_PROTOCOL 'z' +#define TS_ONLINE_PROTOCOL_char z +#define TS_OUTPUT_COMMAND 'O' +#define TS_OUTPUT_COMMAND_char O +#define TS_PAGE_COMMAND 'P' +#define TS_PAGE_COMMAND_char P +#define TS_PERF_TRACE_BEGIN '_' +#define TS_PERF_TRACE_BEGIN_char _ +#define TS_PERF_TRACE_GET_BUFFER 'b' +#define TS_PERF_TRACE_GET_BUFFER_char b +#define TS_PROTOCOL "001" +#define TS_QUERY_COMMAND 'Q' +#define TS_QUERY_COMMAND_char Q +#define TS_READ_COMMAND 'R' +#define TS_READ_COMMAND_char R +#define TS_RESPONSE_BURN_OK 4 +#define TS_RESPONSE_COMMAND_OK 7 +#define TS_RESPONSE_CRC_FAILURE 0x82 +#define TS_RESPONSE_FRAMING_ERROR 0x8D +#define TS_RESPONSE_OK 0 +#define TS_RESPONSE_OUT_OF_RANGE 0x84 +#define TS_RESPONSE_UNDERRUN 0x80 +#define TS_RESPONSE_UNRECOGNIZED_COMMAND 0x83 +#define TS_SET_LOGGER_SWITCH 'l' +#define TS_SET_LOGGER_SWITCH_char l +#define ts_show_analog_divider true +#define ts_show_auxserial_pins true +#define ts_show_can2 true +#define ts_show_can_pins true +#define ts_show_clt_iat_pullup true +#define ts_show_egt true +#define ts_show_engine_control false +#define ts_show_etb true +#define ts_show_etb_pins false +#define ts_show_full_pinout true +#define ts_show_hardware_simulator true +#define ts_show_hip9011 false +#define ts_show_ignitionPinMode true +#define ts_show_inj_diag false +#define ts_show_injectionPinMode false +#define ts_show_joystick true +#define ts_show_lcd true +#define ts_show_main_relay true +#define ts_show_main_relay_microRusEFI_message false +#define ts_show_sd_card true +#define ts_show_sd_pins true +#define ts_show_software_knock false +#define ts_show_spi true +#define ts_show_tps_sent false +#define ts_show_trigger_comparator false +#define ts_show_tunerstudio_port true +#define ts_show_vbatt true +#define ts_show_vr_threshold_2 true +#define ts_show_vr_threshold_all true +#define ts_show_vr_threshold_pins true +#define TS_SIGNATURE "rusEFI default.2023.12.04.XXX.2192944932" +#define TS_SIMULATE_CAN '>' +#define TS_SIMULATE_CAN_char > +#define TS_SINGLE_WRITE_COMMAND 'W' +#define TS_SINGLE_WRITE_COMMAND_char W +#define TS_TEST_COMMAND 't' +#define TS_TEST_COMMAND_char t +#define TS_TOTAL_OUTPUT_SIZE 1440 +#define TS_TRIGGER_SCOPE_CHANNEL_1_NAME "Channel 1" +#define TS_TRIGGER_SCOPE_CHANNEL_2_NAME "Channel 2" +#define TS_TRIGGER_SCOPE_DISABLE 5 +#define TS_TRIGGER_SCOPE_ENABLE 4 +#define TS_TRIGGER_SCOPE_READ 6 +#define TsCalMode_EtbKd 5 +#define TsCalMode_EtbKi 4 +#define TsCalMode_EtbKp 3 +#define TsCalMode_None 0 +#define TsCalMode_PedalMax 13 +#define TsCalMode_PedalMin 12 +#define TsCalMode_Tps1Max 1 +#define TsCalMode_Tps1Min 2 +#define TsCalMode_Tps1SecondaryMax 6 +#define TsCalMode_Tps1SecondaryMin 7 +#define TsCalMode_Tps2Max 8 +#define TsCalMode_Tps2Min 9 +#define TsCalMode_Tps2SecondaryMax 10 +#define TsCalMode_Tps2SecondaryMin 11 +#define uart_device_e_auto_enum 0="UART_NONE",1="UART_DEVICE_1",2="UART_DEVICE_2",3="UART_DEVICE_3",4="UART_DEVICE_4" +#define uart_device_e_UART_DEVICE_1 1 +#define uart_device_e_UART_DEVICE_2 2 +#define uart_device_e_UART_DEVICE_3 3 +#define uart_device_e_UART_DEVICE_4 4 +#define uart_device_e_UART_NONE 0 +#define UiMode_auto_enum 0="FULL",1="INSTALLATION",2="TUNING" +#define UiMode_enum "Full", "Installation", "Tuning" +#define UiMode_FULL 0 +#define UiMode_INSTALLATION 1 +#define UiMode_TUNING 2 +#define VBAT_INJECTOR_CURVE_SIZE 8 +#define VE_BLEND_COUNT 4 +#define ve_override_e_auto_enum 0="VE_None",1="VE_MAP",2="VE_TPS" +#define ve_override_e_enum "None", "MAP", "TPS" +#define ve_override_e_VE_MAP 1 +#define ve_override_e_VE_None 0 +#define ve_override_e_VE_TPS 2 +#define VEHICLE_INFO_SIZE 32 +#define VIN_NUMBER_SIZE 17 +#define VOLTAGE_1_BYTE_PACKING_DIV 0.02 +#define VR_THRESHOLD_COUNT 2 +#define vr_threshold_s_size 16 +#define VSS_FILTER_MAX 200 +#define VSS_FILTER_MIN 3 +#define vvt_mode_e_auto_enum 0="VVT_INACTIVE",8="VVT_BARRA_3_PLUS_1",5="VVT_BOSCH_QUICK_START",19="VVT_FORD_COYOTE",7="VVT_FORD_ST170",16="VVT_HONDA_K_EXHAUST",10="VVT_HONDA_K_INTAKE",13="VVT_MAP_V_TWIN",15="VVT_MAZDA_SKYACTIV",3="VVT_MIATA_NB",12="VVT_MITSUBISHI_3A92",18="VVT_MITSUBISHI_4G63",4="VVT_MITSUBISHI_4G69",17="VVT_MITSUBISHI_4G9x",20="VVT_MITSUBISHI_6G72",14="VVT_MITSUBISHI_6G75",11="VVT_NISSAN_MR",9="VVT_NISSAN_VQ",1="VVT_SINGLE_TOOTH",2="VVT_TOYOTA_3_TOOTH",6="VVT_TOYOTA_4_1" +#define vvt_mode_e_enum "Inactive", "Single Tooth", "Toyota 3 Tooth", "Miata NB2", "Mitsu 4G69", "Bosch Quick Start", "4/1", "ST 170", "Ford Barra 3+1", "Nissan VQ", "Honda K Intake", "Nissan MR18", "Mitsu 3A92", "VTwin by MAP", "Mitsu 6G75", "Mazda Skyactiv", "Honda K Exhaust", "Mitsubishi 4G92/93/94", "Mitsubishi 4G63", "Ford Coyote", "Mitsu 6G72" +#define vvt_mode_e_VVT_BARRA_3_PLUS_1 8 +#define vvt_mode_e_VVT_BOSCH_QUICK_START 5 +#define vvt_mode_e_VVT_FORD_COYOTE 19 +#define vvt_mode_e_VVT_FORD_ST170 7 +#define vvt_mode_e_VVT_HONDA_K_EXHAUST 16 +#define vvt_mode_e_VVT_HONDA_K_INTAKE 10 +#define vvt_mode_e_VVT_INACTIVE 0 +#define vvt_mode_e_VVT_MAP_V_TWIN 13 +#define vvt_mode_e_VVT_MAZDA_SKYACTIV 15 +#define vvt_mode_e_VVT_MIATA_NB 3 +#define vvt_mode_e_VVT_MITSUBISHI_3A92 12 +#define vvt_mode_e_VVT_MITSUBISHI_4G63 18 +#define vvt_mode_e_VVT_MITSUBISHI_4G69 4 +#define vvt_mode_e_VVT_MITSUBISHI_4G9x 17 +#define vvt_mode_e_VVT_MITSUBISHI_6G72 20 +#define vvt_mode_e_VVT_MITSUBISHI_6G75 14 +#define vvt_mode_e_VVT_NISSAN_MR 11 +#define vvt_mode_e_VVT_NISSAN_VQ 9 +#define vvt_mode_e_VVT_SINGLE_TOOTH 1 +#define vvt_mode_e_VVT_TOYOTA_3_TOOTH 2 +#define vvt_mode_e_VVT_TOYOTA_4_1 6 +#define VVT_TRACKING_LENGTH 4 +#define WARNING_BUFFER_SIZE 120 +#define WWAE_TABLE_SIZE 8 diff --git a/generated/signature_XXX.h b/generated/signature_XXX.h new file mode 100644 index 0000000..451d5f9 --- /dev/null +++ b/generated/signature_XXX.h @@ -0,0 +1,6 @@ +// +// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer +// + +#define SIGNATURE_HASH 2192944932 +#define TS_SIGNATURE "rusEFI default.2023.12.04.XXX.2192944932"