Update custom_firmware.yaml

does example compile

connectors/custom_firmware.yaml

@@ -1,130 +1,81 @@
 pins:
-    
+  - id: B14
+    class: outputs
+    ts_name: B14 Output
+
   - id: EFI_ADC_0
     class: analog_inputs
 # getAdcChannelBrainPin in 'stm32_adc.cpp' says EFI_ADC_0 is PA0
-    ts_name: TPS (A0)
+    ts_name: On-board Battery Sense (A0)
 
   - id: EFI_ADC_1
     class: analog_inputs
-    ts_name: MAP (A1)
+    ts_name: Analog Inputs 1 (A1)
 
   - id: EFI_ADC_2
     class: analog_inputs
-    ts_name: CLT (A2)
+    ts_name: Analog Inputs 2 (A2)
 
-  #- id: EFI_ADC_3
- #   class: analog_inputs
-   # ts_name: Knock (A3)
+  - id: EFI_ADC_3
+    class: analog_inputs
+    ts_name: Analog Inputs 3 (A3)
 
-    - id: B1
-    class: switch_inputs
-    ts_name: CKP (B1)
-    
- # - id: [A6, A6]
- #   class: [switch_inputs, event_inputs]
- #   ts_name: CMP (A6)
+  - id: EFI_ADC_4
+    class: analog_inputs
+    ts_name: Analog Inputs 4 (A4)
+
+  - id: EFI_ADC_5
+    class: analog_inputs
+    ts_name: On-board MAP (A5)
+
+  - id: EFI_ADC_6
+    class: analog_inputs
+    ts_name: Analog Inputs 6 (A6)
+
+  - id: EFI_ADC_7
+    class: analog_inputs
+    ts_name: Analog Inputs 7 (A7)
 
   - id: EFI_ADC_8
     class: analog_inputs
-    ts_name: O2-2 (B0)
+    ts_name: On-board BARO (B0)
+
+  - id: EFI_ADC_9
+    class: analog_inputs
+    ts_name: Analog Inputs 9 (B1)
+
+  - id: EFI_ADC_10
+    class: analog_inputs
+    ts_name: Analog Inputs 10 (C0)
+
+  - id: EFI_ADC_11
+    class: analog_inputs
+    ts_name: Primary On-board O2 (C1)
 
   - id: EFI_ADC_12
     class: analog_inputs
-    ts_name: IAT  (C2)
+    ts_name: Secondary On-board O2 (C2)
 
   - id: EFI_ADC_13
     class: analog_inputs
-    ts_name: O2-1 (C3)
+    ts_name: Analog Inputs 13 (C3)
 
-  - id: A8
-    class: outputs
-    ts_name: Ignition 1
+  - id: EFI_ADC_14
+    class: analog_inputs
+    ts_name: Analog Inputs 14 (C4)
 
-  - id: C9
-    class: outputs
-    ts_name: Ignition 2
+  - id: EFI_ADC_15
+    class: analog_inputs
+    ts_name: Analog Inputs 15 (C5)
 
-  - id: A10
-    class: outputs
-    ts_name: Ignition 3
+  - id: [E2, E2]
+    class: [switch_inputs, event_inputs]
+    ts_name: VR/Hall 1 (E2)
 
-  - id: C8
-    class: outputs
-    ts_name: Ignition 4
+  - id: [E3, E3]
+    class: [switch_inputs, event_inputs]
+    ts_name: VR/Hall 2 (E3)
 
-  - id: E0
-    class: outputs
-    ts_name: Injector 1
-
-  - id: E6
-    class: outputs
-    ts_name: Injector 2
-
-  - id: D9
-    class: outputs
-    ts_name: Injector 3
-
-  - id: E3
-    class: outputs
-    ts_name: Injector 4
-
-  - id: E4
-    class: outputs
-    ts_name: Fuel Pump (PE4)
-
-  - id: B8
-    class: outputs
-    ts_name: Tach (PB8)
-
-  - id: B9
-    class: outputs
-    ts_name: Boost (PB9)
-
-  - id: B14
-    class: outputs
-    ts_name: StepDir
-
-  - id: B15
-    class: outputs
-    ts_name: StepStep
-
-  - id: C5
-    class: outputs
-    ts_name: Idle
-
-  - id: C13
-    class: outputs
-    ts_name: Fan (PC13)
-    
-#  - id: Gpio::D0
-#    class: can
-#    ts_name: CAN Rx
-
-  #- id: Gpio::D1
-  #  class: can
-  #  ts_name: CAN Tx
-
- # - id: [PD11, PD11]
- #   class: [output, switch_inputs]
- #   ts_name: I/O PD11
-
-  #- id: [D12, D12]
-  #  class: [output, switch_inputs]
-  #  ts_name: I/O PD12
-
-  #- id: [D13, D13]
-  #  class: [output, switch_inputs]
-  #  ts_name: I/O PD13
-
-  #- id: [D14, D14]
-  #  class: [output, switch_inputs]
-  #  ts_name: I/O PD14
-
-#  - id: [E11, E11]
-#    class: [output, switch_inputs]
-#    ts_name: I/O PE11
-
-  #- id: [E12, E12]
-  #  class: [output, switch_inputs]
-  #  ts_name: I/O PE12
+  - id: [E4, E4]
+    class: [switch_inputs, event_inputs]
+    ts_name: VR/Hall 3 (E4)