rev.D with mcu-144

board_id_na6_94-d.csv

@@ -0,0 +1,3 @@
+# resistor | value | footprint | part_number
+"R133","620","R0603","C23220"
+"R134","1800","R0603","C4177"

bom_replace_hellen64_NA6_94-d.csv

@@ -0,0 +1,64 @@
+# remove the jumper connection from VCC_PP1 to +5V: we need +12v power supply for push-pull outputs.
+R309,
+
+# remove +5V pull-ups from SPI1, because we use it with +3.3v accelerometer
+R103,
+R105,
+
+# remove jumper resistor connecting BOOT1 with A22 input line, because we use STM32F4
+R131,
+
+# STM32
+U105,"STM32F407ZGT6","LQFP144","C19156"
+
+# DC-DC Inductor
+L421,"MWSA0503S-100MT","SMD-5.2x5.4x2.8","C408412"
+L420,"LBC3225T2R2MR","1210","C223413"
+
+# LMR14020->LMR14030 (more power, no problem)
+U420,"LMR14030","SOP8","C182078"
+
+# trigger schmidt buffer
+U490,"SN74LVC2G17DCKR","SOT-363","C50714"
+U491,"SN74LVC2G17DCKR","SOT-363","C50714"
+
+#fuses
+F410,"nSMD050-24V","F1206","C70076"
+F300,"nSMD050-24V","F1206","C70076"
+F1,"Fuse-5A-1206","F1206","C553924"
+F2,"Fuse-5A-1206","F1206","C553924"
+F3,"Fuse-5A-1206","F1206","C553924"
+"R29,F101","nSMD035-16V","SMD1206","C70072"
+
+#INJ low-side
+Q305,"ZXMS6005SGTA","SOT-223","C174042"
+Q306,"ZXMS6005SGTA","SOT-223","C174042"
+Q307,"ZXMS6005SGTA","SOT-223","C174042"
+Q308,"ZXMS6005SGTA","SOT-223","C174042"
+Q309,"ZXMS6005SGTA","SOT-223","C174042"
+Q310,"ZXMS6005SGTA","SOT-223","C174042"
+Q311,"ZXMS6005SGTA","SOT-223","C174042"
+Q312,"ZXMS6005SGTA","SOT-223","C174042"
+
+#power distribution
+U103,"AP2331W-7","SOT-23","C460346"
+U480,"AP2331W-7","SOT-23","C460346"
+
+#wbo opamp
+U601,"GS8551-TR","TSOT23-5","C157715"
+U601_2,"GS8551-TR","TSOT23-5","C157715"
+
+#non-JLC componentts
+#WBO low-side
+Q600,
+Q600_2,
+#WBO low-side
+Q601,
+Q601_2,
+#WBO STM32
+U602,
+U602_2,
+#pressure sensor
+U4,
+
+#include board_id_na6_94-d.csv

fp-info-cache

@@ -1,4 +1,4 @@
-20005696488278190
+20007691256982755
 Audio_Module
 Reverb_BTDR-1H
 Digital Reverberation Unit, http://www.belton.co.kr/inc/downfile.php?seq=17&file=pdf (footprint from http://www.uk-electronic.de/PDF/BTDR-1.pdf)
@@ -84609,6 +84609,13 @@ DSO DSO-8 SOIC SOIC-8
 12
 9
 hellen-one-common
+PG-TSON-10-2
+TSON-10, 10 Pin (https://www.infineon.com/cms/en/product/packages/PG-TSON/PG-TSON-10-2/)
+TSON-10 NoLead
+0
+18
+11
+hellen-one-common
 PROTO_AREA
 
 

gerber/hellen64_NA6_94-B_Cu.gbl

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Copper,L2,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-B_Fab.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,AssemblyDrawing,Bot*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-B_Mask.gbs

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-B_Silkscreen.gbo

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*
@@ -4331,22 +4331,19 @@ X3496918Y83981531D01*
 X3592156Y83886293D01*
 X3687394Y83981531D01*
 X3496918Y83981531D01*
-X3687394Y87600579D02*
+X3496918Y86457721D02*
-X3592156Y87505340D01*
+X5496918Y86457721D01*
-X3496918Y87219626D01*
+X5496918Y86933912D01*
-X3496918Y87029150D01*
+X5401680Y87219626D01*
-X3592156Y86743436D01*
+X5211203Y87410102D01*
-X3782632Y86552960D01*
+X5020727Y87505340D01*
-X3973108Y86457721D01*
+X4639775Y87600579D01*
-X4354060Y86362483D01*
+X4354060Y87600579D01*
-X4639775Y86362483D01*
+X3973108Y87505340D01*
-X5020727Y86457721D01*
+X3782632Y87410102D01*
-X5211203Y86552960D01*
+X3592156Y87219626D01*
-X5401680Y86743436D01*
+X3496918Y86933912D01*
-X5496918Y87029150D01*
+X3496918Y86457721D01*
-X5496918Y87219626D01*
-X5401680Y87505340D01*
-X5306441Y87600579D01*
 D11*
 X16317714Y143465381D02*
 X16898285Y143465381D01*

gerber/hellen64_NA6_94-Edge_Cuts.gm1

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-F_Cu.gtl

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Copper,L1,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-F_Fab.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,AssemblyDrawing,Top*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-F_Mask.gts

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-F_Paste.gtp

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*

gerber/hellen64_NA6_94-F_Silkscreen.gto

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(6.0.1)*
-G04 #@! TF.CreationDate,2022-06-25T09:27:14+03:00*
+G04 #@! TF.CreationDate,2022-08-24T16:53:37+03:00*
 G04 #@! TF.ProjectId,hellen64_NA6_94,68656c6c-656e-4363-945f-4e41365f3934,b*
 G04 #@! TF.SameCoordinates,PX141ef50PYa2cc1bc*
 G04 #@! TF.FileFunction,Legend,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-06-25 09:27:14*
+G04 Created by KiCad (PCBNEW (6.0.1)) date 2022-08-24 16:53:37*
 %MOMM*%
 %LPD*%
 G01*
@@ -424,22 +424,19 @@ X8704761Y89776191D01*
 X8609523Y89680953D01*
 X8514285Y89776191D01*
 X8704761Y89776191D01*
-X8514285Y93395239D02*
+X8704761Y92252381D02*
-X8609523Y93300000D01*
+X6704761Y92252381D01*
-X8704761Y93014286D01*
+X6704761Y92728572D01*
-X8704761Y92823810D01*
+X6800000Y93014286D01*
-X8609523Y92538096D01*
+X6990476Y93204762D01*
-X8419047Y92347620D01*
+X7180952Y93300000D01*
-X8228571Y92252381D01*
+X7561904Y93395239D01*
-X7847619Y92157143D01*
+X7847619Y93395239D01*
-X7561904Y92157143D01*
+X8228571Y93300000D01*
-X7180952Y92252381D01*
+X8419047Y93204762D01*
-X6990476Y92347620D01*
+X8609523Y93014286D01*
-X6800000Y92538096D01*
+X8704761Y92728572D01*
-X6704761Y92823810D01*
+X8704761Y92252381D01*
-X6704761Y93014286D01*
-X6800000Y93300000D01*
-X6895238Y93395239D01*
 D12*
 X122364284Y10899091D02*
 X122364284Y11356234D01*

gerber/hellen64_NA6_94-all-pos.csv

@@ -75,7 +75,7 @@ Ref,Val,Package,PosX,PosY,Rot,Side
 "J27","Conn_01x06","PinHeader_1x06_P2.54mm_Vertical",103.851680,97.005340,-90.000000,top
 "M1","Module-input-0.1","input",115.937640,75.585021,180.000000,top
 "M2","Module-ign8-0.2","ign8",125.901151,33.722075,180.000000,top
-"M3","Module-mcu-0.6","mcu",116.068541,58.463843,180.000000,top
+"M3","Module-mcu144-0.6","mcu",116.068541,58.463843,180.000000,top
 "M4","Module-sd-0.1","sd",72.043541,4.220033,0.000000,top
 "M5","Module-output-0.3","output",57.716540,72.656720,180.000000,top
 "M6","Module-dinput4-0.1","dinput4",83.826692,61.355340,90.000000,top

gerber/hellen64_NA6_94.csv

@@ -86,7 +86,7 @@
 "Conn_01x06","J27","Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical",""
 "Module-input-0.1","M1","hellen-one-input-0.1:input",""
 "Module-ign8-0.2","M2","hellen-one-ign8-0.2:ign8",""
-"Module-mcu-0.6","M3","hellen-one-mcu-0.5:mcu",""
+"Module-mcu144-0.6","M3","hellen-one-mcu-0.5:mcu",""
 "Module-sd-0.1","M4","hellen-one-sd-0.1:sd",""
 "Module-output-0.3","M5","hellen-one-output-0.3:output",""
 "Module-dinput4-0.1","M6","hellen-one-dinput4-0.1:dinput4",""

gerber/hellen64_NA6_94.drl

@@ -1,7 +1,7 @@
 M48
-; DRILL file {KiCad (6.0.1)} date Sat Jun 25 09:27:10 2022
+; DRILL file {KiCad (6.0.1)} date Wed Aug 24 16:53:40 2022
 ; FORMAT={2:4/ absolute / inch / suppress leading zeros}
-; #@! TF.CreationDate,2022-06-25T09:27:10+03:00
+; #@! TF.CreationDate,2022-08-24T16:53:40+03:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,(6.0.1)
 ; #@! TF.FileFunction,MixedPlating,1,2
 FMAT,2

hellen-one

@@ -1 +1 @@
-Subproject commit a823eafc65400bec2a1430b8f85fda4c5ce29a1f
+Subproject commit 78b500299b3a15f119e816cfb0eaf7c7823c6756

hellen64_NA6_94.kicad_pcb

@@ -5522,14 +5522,14 @@
     (at 137.166861 112.241497 180)
     (property "Sheetfile" "hellen64_NA6_94.kicad_sch")
     (property "Sheetname" "")
-    (path "/a6bf355d-1d5f-4e79-8e3f-45e3bddf3ceb")
+    (path "/915d735b-9683-4d94-8b0d-1fa27ebac489")
     (zone_connect 2)
     (attr through_hole)
     (fp_text reference "M3" (at 0.254 -38.1254 180 unlocked) (layer "F.SilkS") hide
       (effects (font (size 1.524 1.524) (thickness 0.254)) (justify left bottom))
       (tstamp ff444605-da92-4adc-9849-b9b054a66b7e)
     )
-    (fp_text value "Module-mcu-0.6" (at -37.350619 2.2987 180 unlocked) (layer "F.SilkS") hide
+    (fp_text value "Module-mcu144-0.6" (at -37.350619 2.2987 180 unlocked) (layer "F.SilkS") hide
       (effects (font (size 1.524 1.524) (thickness 0.254)) (justify left bottom))
       (tstamp 53b42aab-a5f9-4f99-a758-491246ccfe53)
     )
@@ -13145,7 +13145,7 @@
   (gr_text "+" (at 73.71 25.35) (layer "B.SilkS") (tstamp f6f6ad89-e385-459f-83ec-6ee012b5a5b3)
     (effects (font (size 1.016 1.016) (thickness 0.22352)) (justify mirror))
   )
-  (gr_text "rev. С" (at 25.5 87.2 270) (layer "B.SilkS") (tstamp f7d85e7d-fedd-4454-8798-e5e67021518f)
+  (gr_text "rev. D" (at 25.5 87.2 270) (layer "B.SilkS") (tstamp f7d85e7d-fedd-4454-8798-e5e67021518f)
     (effects (font (size 2 2) (thickness 0.3)) (justify mirror))
   )
   (gr_text "1B" (at 37.19832 26.78034) (layer "B.SilkS") (tstamp fa11a5ae-0e3e-4802-9d3e-97214a714b81)
@@ -13193,7 +13193,7 @@
   (gr_text "3Z" (at 157.55932 28.53334 90) (layer "F.SilkS") (tstamp 206e74e3-84ee-48f1-b728-4e7add2ce2e9)
     (effects (font (size 0.508 0.508) (thickness 0.127)))
   )
-  (gr_text "rev. С" (at 28.89832 81.40534 90) (layer "F.SilkS") (tstamp 20c81b15-56f4-4b0f-8c93-25debaa5ba43)
+  (gr_text "rev. D" (at 28.89832 81.40534 90) (layer "F.SilkS") (tstamp 20c81b15-56f4-4b0f-8c93-25debaa5ba43)
     (effects (font (size 2 2) (thickness 0.3)))
   )
   (gr_text "TX" (at 144.3007 159.99294 90) (layer "F.SilkS") (tstamp 24cbc65a-fa99-44c2-b623-4393c15c1ea3)

hellen64_NA6_94.kicad_sch

@@ -6,8 +6,8 @@
 
   (title_block
     (title "hellen64 NA6 94")
-    (date "2022-06-25")
+    (date "2022-08-24")
-    (rev "С")
+    (rev "D")
     (company "rusEFI")
     (comment 7 "http://rusefi.com/s/hellenNA6")
   )
@@ -17327,7 +17327,7 @@
     (property "Reference" "M3" (id 0) (at 418.4651 203.7091 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "Module-mcu-0.6" (id 1) (at 418.4651 206.0078 0)
+    (property "Value" "Module-mcu144-0.6" (id 1) (at 418.4651 206.0078 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "hellen-one-mcu-0.5:mcu" (id 2) (at 420.37 207.01 0)
@@ -18732,7 +18732,7 @@
     (property "Reference" "M3" (id 0) (at 418.4651 65.2791 0)
       (effects (font (size 1.27 1.27)) (justify right))
     )
-    (property "Value" "Module-mcu-0.6" (id 1) (at 418.4651 67.5778 0)
+    (property "Value" "Module-mcu144-0.6" (id 1) (at 418.4651 67.5778 0)
       (effects (font (size 1.27 1.27)) (justify right))
     )
     (property "Footprint" "hellen-one-mcu-0.5:mcu" (id 2) (at 435.61 68.58 0)
@@ -19270,7 +19270,7 @@
     (in_bom yes) (on_board yes)
     (uuid a6bf355d-1d5f-4e79-8e3f-45e3bddf3ceb)
     (property "Reference" "M3" (id 0) (at 445.9605 65.2738 0))
-    (property "Value" "Module-mcu-0.6" (id 1) (at 451.0405 67.5725 0))
+    (property "Value" "Module-mcu144-0.6" (id 1) (at 451.0405 67.5725 0))
     (property "Footprint" "hellen-one-mcu-0.5:mcu" (id 2) (at 435.61 68.58 0)
       (effects (font (size 1.27 1.27)) hide)
     )
@@ -19420,7 +19420,7 @@
     (in_bom yes) (on_board yes) (fields_autoplaced)
     (uuid a7d95f89-5755-415c-ab05-3cba0bcc1e6a)
     (property "Reference" "M3" (id 0) (at 473.71 215.1338 0))
-    (property "Value" "Module-mcu-0.6" (id 1) (at 473.71 217.4325 0))
+    (property "Value" "Module-mcu144-0.6" (id 1) (at 473.71 217.4325 0))
     (property "Footprint" "hellen-one-mcu-0.5:mcu" (id 2) (at 455.93 218.44 0)
       (effects (font (size 1.27 1.27)) hide)
     )
@@ -22752,16 +22752,16 @@
       (reference "M2") (unit 1) (value "Module-ign8-0.2") (footprint "hellen-one-ign8-0.2:ign8")
     )
     (path "/a6bf355d-1d5f-4e79-8e3f-45e3bddf3ceb"
-      (reference "M3") (unit 1) (value "Module-mcu-0.6") (footprint "hellen-one-mcu-0.5:mcu")
+      (reference "M3") (unit 1) (value "Module-mcu144-0.6") (footprint "hellen-one-mcu-0.5:mcu")
     )
     (path "/915d735b-9683-4d94-8b0d-1fa27ebac489"
-      (reference "M3") (unit 2) (value "Module-mcu-0.6") (footprint "hellen-one-mcu-0.5:mcu")
+      (reference "M3") (unit 2) (value "Module-mcu144-0.6") (footprint "hellen-one-mcu-0.5:mcu")
     )
     (path "/5f1c7f30-e456-4e5e-847b-c87579bb1a4c"
-      (reference "M3") (unit 3) (value "Module-mcu-0.6") (footprint "hellen-one-mcu-0.5:mcu")
+      (reference "M3") (unit 3) (value "Module-mcu144-0.6") (footprint "hellen-one-mcu-0.5:mcu")
     )
     (path "/a7d95f89-5755-415c-ab05-3cba0bcc1e6a"
-      (reference "M3") (unit 4) (value "Module-mcu-0.6") (footprint "hellen-one-mcu-0.5:mcu")
+      (reference "M3") (unit 4) (value "Module-mcu144-0.6") (footprint "hellen-one-mcu-0.5:mcu")
     )
     (path "/46c92d79-ab77-4cea-933a-f95fdcee2757"
       (reference "M4") (unit 1) (value "Module-sd-0.1") (footprint "hellen-one-sd-0.1:sd")

hellen64_NA6_94.xml

@@ -2,14 +2,14 @@
 <export version="E">
   <design>
     <source>G:\RADIO\PROJECTS\S3EFI\Hellen\src\!release\!hellen-boards\commercial_products\hellen_NA6_94\hellen64_NA6_94.kicad_sch</source>
-    <date>25/06/2022 09:26:58</date>
+    <date>24/08/2022 16:53:26</date>
     <tool>Eeschema (6.0.1)</tool>
     <sheet number="1" name="/" tstamps="/">
       <title_block>
         <title>hellen64 NA6 94</title>
         <company>rusEFI</company>
-        <rev>С</rev>
+        <rev>D</rev>
-        <date>2022-06-25</date>
+        <date>2022-08-24</date>
         <source>hellen64_NA6_94.kicad_sch</source>
         <comment number="1" value=""/>
         <comment number="2" value=""/>
@@ -1053,13 +1053,13 @@
       <tstamps>91b56abf-9ad5-4be8-a5c5-2398d74dccc7</tstamps>
     </comp>
     <comp ref="M3">
-      <value>Module-mcu-0.6</value>
+      <value>Module-mcu144-0.6</value>
       <footprint>hellen-one-mcu-0.5:mcu</footprint>
       <libsource lib="hellen-one-mcu-0.5" part="Module-mcu-0.5" description="Hellen One MCU Module"/>
       <property name="Sheetname" value=""/>
       <property name="Sheetfile" value="hellen64_NA6_94.kicad_sch"/>
       <sheetpath names="/" tstamps="/"/>
-      <tstamps>a6bf355d-1d5f-4e79-8e3f-45e3bddf3ceb a7d95f89-5755-415c-ab05-3cba0bcc1e6a 915d735b-9683-4d94-8b0d-1fa27ebac489 5f1c7f30-e456-4e5e-847b-c87579bb1a4c</tstamps>
+      <tstamps>915d735b-9683-4d94-8b0d-1fa27ebac489 a6bf355d-1d5f-4e79-8e3f-45e3bddf3ceb a7d95f89-5755-415c-ab05-3cba0bcc1e6a 5f1c7f30-e456-4e5e-847b-c87579bb1a4c</tstamps>
     </comp>
     <comp ref="M4">
       <value>Module-sd-0.1</value>

revision.txt

@@ -2,7 +2,7 @@
 
 BOARD_PREFIX=hellen
 BOARD_SUFFIX=64_NA6_94
-BOARD_REVISION=c
+BOARD_REVISION=d
 
 # does not affect fab files, only needed to have nice rendered preview
 BOARD_PCB_OFFSET=0,102

step2_copy_hellen64_na6.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
 cd hellen-one
-python2.7 ./bin/copy_from_Kicad.py "frames" "../.." "../../gerber" "64_NA6_94" "c"
+python2.7 ./bin/copy_from_Kicad.py "frames" "../.." "../../gerber" "64_NA6_94" "d"
 
 echo "Done!"

step3_create_hellen64_na6.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
 
 cd hellen-one
-sh bin/create_board.sh ".." "64_NA6_94" "c" "bom_replace_64_NA6_94.csv" "0,102"
+sh bin/create_board.sh ".." "64_NA6_94" "d" "bom_replace_hellen64_NA6_94-d.csv" "0,102"