# remove the jumper connection from VCC_PP1 to +5V: we need +12v power supply for push-pull outputs.
R309,

# remove +5V pull-ups from SPI1, because we use it with +3.3v accelerometer
R103,
R105,

# remove jumper resistor connecting BOOT1 with A22 input line, because we use STM32F4
R131,

# STM32
U105,"STM32F407ZGT7","LQFP144","C1337111"

# DC-DC Inductor
L421,"MWSA0503S-100MT","SMD-5.2x5.4x2.8","C408412"
L420,"LBC3225T2R2MR","1210","C223413"

# LMR14020->LMR14030 (more power, no problem)
U420,"LMR14030","SOP8","C182078"

#fuses
F410,"nSMD050-24V","F1206","C70076"
F300,"nSMD050-24V","F1206","C70076"
F1,"Fuse-5A-1206","F1206","C553924"
F2,"Fuse-5A-1206","F1206","C553924"
F3,"Fuse-5A-1206","F1206","C553924"

#INJ low-side
Q305,"ZXMS6005SGTA","SOT-223","C174042"
Q306,"ZXMS6005SGTA","SOT-223","C174042"
Q307,"ZXMS6005SGTA","SOT-223","C174042"
Q308,"ZXMS6005SGTA","SOT-223","C174042"
Q309,"ZXMS6005SGTA","SOT-223","C174042"
Q310,"ZXMS6005SGTA","SOT-223","C174042"
Q311,"ZXMS6005SGTA","SOT-223","C174042"
Q312,"ZXMS6005SGTA","SOT-223","C174042"

#power distribution
U103,"AP2331W-7","SOT-23","C460346"
U480,"AP2331W-7","SOT-23","C460346"

#non-JLC componentts
#WBO low-side
Q600,
Q600_2,
#WBO STM32
U602,
U602_2,
#pressure sensor
U4,

#include board_id_nb1-c.csv