diff --git a/testing_progress.md b/testing_progress.md
index d5d69fc..c4cc118 100644
--- a/testing_progress.md
+++ b/testing_progress.md
@@ -5,22 +5,4 @@ Jan 21, 2020:
 
 
 Jan 20, 2020:
-AndreiKA says to remove the following parts from JLCPCB 72a in order to run a Miata NB text vehicle:
-
-1) External MAP vs more ignition channels:
-
- a) if you are going to use an external MAP, then remove "R5 (IGN5)", "R7 (IGN6)" and "R11 (IGN8)"
- 
- b) or if you NOT using an external MAP, then remove "R6 (GND)" and "R8 (+5V)"
- 
- Warning! The board can be damaged if you skip this step!
-
-2) External WBO vs more ignition channels:
-
- if you want to use an external WBO (AFR) sensor, then remove "R1 (IGN7)"
-
-3) Miata vehicle type:
-
- a) if you have a Miata 2002 (where we measure the battery voltage from 4T=alternator), then remove "R9 (2003)"
- 
- b) or if you have a Miata 2003 (where we measure the battery voltage from 4S=ign.switch), then remove "R10 (2002)"
+AndreiKA says https://github.com/rusefi/rusefi/wiki/Hellen72#jumpers