diff --git a/docs/analog.md b/docs/analog.md
new file mode 100644
index 0000000..e127d6c
--- /dev/null
+++ b/docs/analog.md
@@ -0,0 +1,16 @@
+Analog Inputs
+=============
+_NB: this refers to general purpose analog inputs for things like CLT, TPS, MAP, etc.  High-speed inputs like triggers and knock have their own pages at [trigger](docs/design/trigger.md) and [knock](docs/design/knock.md)_
+
+## What do the analog inputs support? ##
+- 16 channels
+- 0-5v input
+- No input protection, other than 1k series resistor
+
+## How do the analog inputs work? ##
+- 16 channels are managed by 4 MCP6004 quad op-amps.
+- 1k + 1nf RC filter input to opamp non-inverting input.  This gives approximately 160khz of bandwidth.  If a lower knee is desired, additional circuitry can be added (series resistor, or another RC, etc) to the vehicle adapter.
+- Dual 1.5k resistor divider on the output, scaling 0-5v input to 0-2.5v output.  The input impedance of the STM32's ADC is on the order of 6k, so the exact value chosen does not appreciably alter the response of the system.
+
+## What do the analog inputs NOT do? ##
+- Input protection: this is highly pin specific, and may not be wanted if the signal is coming from the vehicle adapter board.  Appropriate larger series resistor and TVS diodes recommended.
diff --git a/docs/knock.md b/docs/knock.md
new file mode 100644
index 0000000..176d75a
--- /dev/null
+++ b/docs/knock.md
@@ -0,0 +1,2 @@
+Knock Sensor Inputs
+===================
diff --git a/docs/outputs.md b/docs/outputs.md
new file mode 100644
index 0000000..f1d861b
--- /dev/null
+++ b/docs/outputs.md
@@ -0,0 +1,2 @@
+Outputs (injector, low side, and push-pull)
+===========================================
diff --git a/docs/power.md b/docs/power.md
new file mode 100644
index 0000000..ed9184b
--- /dev/null
+++ b/docs/power.md
@@ -0,0 +1,2 @@
+Power Supplies
+==============
diff --git a/docs/trigger.md b/docs/trigger.md
new file mode 100644
index 0000000..76f8177
--- /dev/null
+++ b/docs/trigger.md
@@ -0,0 +1,2 @@
+Trigger (Hall & VR) Inputs
+==========================