From 313202ae0351379ce474616063ca0e117bef3050 Mon Sep 17 00:00:00 2001 From: Frank Voorburg Date: Mon, 4 Jul 2022 10:35:31 +0000 Subject: [PATCH] Refs #1405. Tuned XCP packet sizes for RS232 and TCP/IP, resulting in improved throughput. git-svn-id: https://svn.code.sf.net/p/openblt/code/trunk@955 5dc33758-31d5-4daf-9ae8-b24bf3d40d73 --- .../Boot/blt_conf.h | 18 +++++++++--------- .../Boot/blt_conf.h | 18 +++++++++--------- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 18 +++++++++--------- .../Boot/blt_conf.h | 18 +++++++++--------- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/App/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/blt_conf.h | 8 ++++---- .../Boot/App/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- .../Boot/blt_conf.h | 4 ++-- Target/Demo/_template/Boot/blt_conf.h | 4 ++-- 92 files changed, 238 insertions(+), 238 deletions(-) diff --git a/Target/Demo/ARMCM0_S32K11_S32K118EVB_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM0_S32K11_S32K118EVB_GCC/Boot/blt_conf.h index b8eb972f..643a158e 100644 --- a/Target/Demo/ARMCM0_S32K11_S32K118EVB_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_S32K11_S32K118EVB_GCC/Boot/blt_conf.h @@ -56,24 +56,24 @@ /**************************************************************************************** * C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N ****************************************************************************************/ -/* The UART communication interface is selected by setting the BOOT_COM_UART_ENABLE - * configurable to 1. Configurable BOOT_COM_UART_BAUDRATE selects the communication speed +/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE + * configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed * in bits/second. The maximum amount of data bytes in a message for data transmission - * and reception is set through BOOT_COM_UART_TX_MAX_DATA and BOOT_COM_UART_RX_MAX_DATA, + * and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA, * respectively. It is common for a microcontroller to have more than 1 UART interface - * on board. The zero-based BOOT_COM_UART_CHANNEL_INDEX selects the UART interface. + * on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface. * */ /** \brief Enable/disable UART transport layer. */ -#define BOOT_COM_RS232_ENABLE (1) +#define BOOT_COM_RS232_ENABLE (1) /** \brief Configure the desired communication speed. */ -#define BOOT_COM_RS232_BAUDRATE (57600) +#define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ -#define BOOT_COM_RS232_CHANNEL_INDEX (0) +#define BOOT_COM_RS232_CHANNEL_INDEX (0) /* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE * configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed diff --git a/Target/Demo/ARMCM0_S32K11_S32K118EVB_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM0_S32K11_S32K118EVB_IAR/Boot/blt_conf.h index 66ea556c..98852ab3 100644 --- a/Target/Demo/ARMCM0_S32K11_S32K118EVB_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_S32K11_S32K118EVB_IAR/Boot/blt_conf.h @@ -56,24 +56,24 @@ /**************************************************************************************** * C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N ****************************************************************************************/ -/* The UART communication interface is selected by setting the BOOT_COM_UART_ENABLE - * configurable to 1. Configurable BOOT_COM_UART_BAUDRATE selects the communication speed +/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE + * configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed * in bits/second. The maximum amount of data bytes in a message for data transmission - * and reception is set through BOOT_COM_UART_TX_MAX_DATA and BOOT_COM_UART_RX_MAX_DATA, + * and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA, * respectively. It is common for a microcontroller to have more than 1 UART interface - * on board. The zero-based BOOT_COM_UART_CHANNEL_INDEX selects the UART interface. + * on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface. * */ /** \brief Enable/disable UART transport layer. */ -#define BOOT_COM_RS232_ENABLE (1) +#define BOOT_COM_RS232_ENABLE (1) /** \brief Configure the desired communication speed. */ -#define BOOT_COM_RS232_BAUDRATE (57600) +#define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ -#define BOOT_COM_RS232_CHANNEL_INDEX (0) +#define BOOT_COM_RS232_CHANNEL_INDEX (0) /* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE * configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed diff --git a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_CubeIDE/Boot/App/blt_conf.h index df808dbb..2477ed07 100644 --- a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_CubeIDE/Boot/App/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Boot/blt_conf.h index 66b42f5c..7062ff6c 100644 --- a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_IAR/Boot/blt_conf.h index 96bdee11..cb22aff2 100644 --- a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_Keil/Boot/blt_conf.h index 61d8b9a1..76051458 100644 --- a/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_Keil/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_CubeIDE/Boot/App/blt_conf.h index 7ac2cf16..d2d7f6b3 100644 --- a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Boot/blt_conf.h index bf4a5f96..d4424e53 100644 --- a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_IAR/Boot/blt_conf.h index 132184f5..8ea055ae 100644 --- a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_Keil/Boot/blt_conf.h index 3f145a28..3555515f 100644 --- a/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_CubeIDE/Boot/App/blt_conf.h index 87e11da6..1a7004b5 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_CubeIDE/Boot/App/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_GCC/Boot/blt_conf.h index 33e310a1..86c1e643 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_GCC/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_IAR/Boot/blt_conf.h index 7dbdd12f..96d83825 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_Keil/Boot/blt_conf.h index c6ac40fb..60e8563e 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G071RB_Keil/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_CubeIDE/Boot/App/blt_conf.h index 9d65bec5..e62c5684 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_CubeIDE/Boot/App/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_GCC/Boot/blt_conf.h index b97d6079..4f15e7ea 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_GCC/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_IAR/Boot/blt_conf.h index 8d1235bc..385b60d3 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_Keil/Boot/blt_conf.h index df307b5e..d3fa5288 100644 --- a/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_STM32G0_Nucleo_G0B1RE_Keil/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_GCC/Boot/blt_conf.h index c22a2608..5f53c1e6 100644 --- a/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_IAR/Boot/blt_conf.h index 418a2e31..617b95dc 100644 --- a/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_Keil/Boot/blt_conf.h index c1e3cd3f..4a72d43a 100644 --- a/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM0_XMC1_XMC1400_Boot_Kit_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_CubeIDE/Boot/App/blt_conf.h index 7a5d3da6..16c40364 100644 --- a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_CubeIDE/Boot/App/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_GCC/Boot/blt_conf.h index 45b4abfe..4bff4ec7 100644 --- a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_GCC/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_IAR/Boot/blt_conf.h index dd6ba992..a77547bb 100644 --- a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_IAR/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_Keil/Boot/blt_conf.h index e2c55b02..c7d34c21 100644 --- a/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM33_STM32L5_Nucleo_L552ZE_Keil/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_GCC/Boot/blt_conf.h index 6702a3aa..967555c7 100644 --- a/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_GCC/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (9600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_IAR/Boot/blt_conf.h index 800b4e6e..04a63701 100644 --- a/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_EFM32_Olimex_EM32G880F128STK_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (9600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_GCC/Boot/blt_conf.h index fa1292c0..91d4da9b 100644 --- a/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_GCC/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) @@ -92,9 +92,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ diff --git a/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_IAR/Boot/blt_conf.h index c0328319..5e86a41a 100644 --- a/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_LM3S_EK_LM3S6965_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) @@ -92,9 +92,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ diff --git a/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_GCC/Boot/blt_conf.h index 35cba780..6e4714cf 100644 --- a/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) diff --git a/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_IAR/Boot/blt_conf.h index 08c7074f..331dbc69 100644 --- a/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_LM3S_EK_LM3S8962_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) diff --git a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_CubeIDE/Boot/App/blt_conf.h index 11ed3a34..4c600832 100644 --- a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_CubeIDE/Boot/App/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Boot/blt_conf.h index 4e464c24..2b358fdb 100644 --- a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_IAR/Boot/blt_conf.h index 9048716c..0867fbae 100644 --- a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_Keil/Boot/blt_conf.h index 258d39df..2cbfb4f7 100644 --- a/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_Keil/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_CubeIDE/Boot/App/blt_conf.h index 15874fe3..3429d5b2 100644 --- a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Boot/blt_conf.h index 36036022..ccff2f6b 100644 --- a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_IAR/Boot/blt_conf.h index 22401e17..9058cc88 100644 --- a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_Keil/Boot/blt_conf.h index 717653e5..fe8a979d 100644 --- a/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_CubeIDE/Boot/App/blt_conf.h index 76c6f974..60cbe5f4 100644 --- a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Boot/blt_conf.h index fc3e4ca2..276492c3 100644 --- a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_IAR/Boot/blt_conf.h index da81f64a..3b5f15da 100644 --- a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_Keil/Boot/blt_conf.h index df5f80ec..faa0629a 100644 --- a/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM4_S32K14_S32K144EVB_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_S32K14_S32K144EVB_GCC/Boot/blt_conf.h index 1444313c..70d18bc5 100644 --- a/Target/Demo/ARMCM4_S32K14_S32K144EVB_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_S32K14_S32K144EVB_GCC/Boot/blt_conf.h @@ -56,24 +56,24 @@ /**************************************************************************************** * C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N ****************************************************************************************/ -/* The UART communication interface is selected by setting the BOOT_COM_UART_ENABLE - * configurable to 1. Configurable BOOT_COM_UART_BAUDRATE selects the communication speed +/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE + * configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed * in bits/second. The maximum amount of data bytes in a message for data transmission - * and reception is set through BOOT_COM_UART_TX_MAX_DATA and BOOT_COM_UART_RX_MAX_DATA, + * and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA, * respectively. It is common for a microcontroller to have more than 1 UART interface - * on board. The zero-based BOOT_COM_UART_CHANNEL_INDEX selects the UART interface. + * on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface. * */ /** \brief Enable/disable UART transport layer. */ -#define BOOT_COM_RS232_ENABLE (1) +#define BOOT_COM_RS232_ENABLE (1) /** \brief Configure the desired communication speed. */ -#define BOOT_COM_RS232_BAUDRATE (57600) +#define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ -#define BOOT_COM_RS232_CHANNEL_INDEX (1) +#define BOOT_COM_RS232_CHANNEL_INDEX (1) /* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE * configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed diff --git a/Target/Demo/ARMCM4_S32K14_S32K144EVB_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_S32K14_S32K144EVB_IAR/Boot/blt_conf.h index 966813dd..82a0381c 100644 --- a/Target/Demo/ARMCM4_S32K14_S32K144EVB_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_S32K14_S32K144EVB_IAR/Boot/blt_conf.h @@ -56,24 +56,24 @@ /**************************************************************************************** * C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N ****************************************************************************************/ -/* The UART communication interface is selected by setting the BOOT_COM_UART_ENABLE - * configurable to 1. Configurable BOOT_COM_UART_BAUDRATE selects the communication speed +/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE + * configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed * in bits/second. The maximum amount of data bytes in a message for data transmission - * and reception is set through BOOT_COM_UART_TX_MAX_DATA and BOOT_COM_UART_RX_MAX_DATA, + * and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA, * respectively. It is common for a microcontroller to have more than 1 UART interface - * on board. The zero-based BOOT_COM_UART_CHANNEL_INDEX selects the UART interface. + * on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface. * */ /** \brief Enable/disable UART transport layer. */ -#define BOOT_COM_RS232_ENABLE (1) +#define BOOT_COM_RS232_ENABLE (1) /** \brief Configure the desired communication speed. */ -#define BOOT_COM_RS232_BAUDRATE (57600) +#define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ -#define BOOT_COM_RS232_CHANNEL_INDEX (1) +#define BOOT_COM_RS232_CHANNEL_INDEX (1) /* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE * configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_CubeIDE/Boot/App/blt_conf.h index 28fff615..14754b2d 100644 --- a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_CubeIDE/Boot/App/blt_conf.h @@ -83,9 +83,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Boot/blt_conf.h index 35bffcc6..6e406a6b 100644 --- a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Boot/blt_conf.h @@ -83,9 +83,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_IAR/Boot/blt_conf.h index bad595b4..568c240e 100644 --- a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_IAR/Boot/blt_conf.h @@ -83,9 +83,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_Keil/Boot/blt_conf.h index 1611cce7..2dc3422c 100644 --- a/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_Keil/Boot/blt_conf.h @@ -83,9 +83,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_CubeIDE/Boot/App/blt_conf.h index b443d490..9c990785 100644 --- a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Boot/blt_conf.h index ebdffd5a..491eb756 100644 --- a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_IAR/Boot/blt_conf.h index 9635907d..bd112d6e 100644 --- a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_Keil/Boot/blt_conf.h index 41f33a95..17661feb 100644 --- a/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_CubeIDE/Boot/App/blt_conf.h index 5ed3e1d9..c4d56c00 100644 --- a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_CubeIDE/Boot/App/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -165,9 +165,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/blt_conf.h index 75471bf9..d2563b0c 100644 --- a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -165,9 +165,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_IAR/Boot/blt_conf.h index 31ec62df..c886ccef 100644 --- a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_IAR/Boot/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -165,9 +165,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_Keil/Boot/blt_conf.h index 7ca1375f..8eb8ff34 100644 --- a/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_Keil/Boot/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -165,9 +165,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_CubeIDE/Boot/App/blt_conf.h index 5f867fe1..81be9b69 100644 --- a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Boot/blt_conf.h index c304819e..294e69e6 100644 --- a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_IAR/Boot/blt_conf.h index 94f5178d..1aa269c9 100644 --- a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_Keil/Boot/blt_conf.h index 2b8676cf..d2a4205a 100644 --- a/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1) diff --git a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_CubeIDE/Boot/App/blt_conf.h index b77242d8..89d8531a 100644 --- a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_GCC/Boot/blt_conf.h index 8ab466ec..00c3f8c5 100644 --- a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_IAR/Boot/blt_conf.h index 111f85e8..44ce5940 100644 --- a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_Keil/Boot/blt_conf.h index 558c480a..2c9a832d 100644 --- a/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32G4_Nucleo_G474RE_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_CubeIDE/Boot/App/blt_conf.h index b4c479e6..2ed24ccc 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_CubeIDE/Boot/App/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Boot/blt_conf.h index d405dc5d..51f9b662 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_IAR/Boot/blt_conf.h index 24e08827..d38c7f82 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_Keil/Boot/blt_conf.h index fbfaa797..01df0b57 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_CubeIDE/Boot/App/blt_conf.h index 4ee66481..b636e547 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_CubeIDE/Boot/App/blt_conf.h @@ -82,9 +82,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_GCC/Boot/blt_conf.h index ba63ac16..0f6b1f82 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_GCC/Boot/blt_conf.h @@ -82,9 +82,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_IAR/Boot/blt_conf.h index 742ec0bb..2a346b7c 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_IAR/Boot/blt_conf.h @@ -82,9 +82,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_Keil/Boot/blt_conf.h index d2be1b98..1697b8f5 100644 --- a/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_STM32L4_Nucleo_L496ZG_Keil/Boot/blt_conf.h @@ -82,9 +82,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. Note that the LPUART * peripherals come after the U(S)ART peripherals. */ diff --git a/Target/Demo/ARMCM4_TM4C_DK_TM4C123G_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_TM4C_DK_TM4C123G_IAR/Boot/blt_conf.h index 194598a9..2e9ffc36 100644 --- a/Target/Demo/ARMCM4_TM4C_DK_TM4C123G_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_TM4C_DK_TM4C123G_IAR/Boot/blt_conf.h @@ -69,9 +69,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) diff --git a/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_GCC/Boot/blt_conf.h index 601fb76d..cab96a2a 100644 --- a/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_GCC/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) @@ -120,9 +120,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ diff --git a/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_IAR/Boot/blt_conf.h index 2a2e88cb..636c6314 100644 --- a/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_IAR/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) @@ -120,9 +120,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ diff --git a/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_Keil/Boot/blt_conf.h index 1cbf8f0f..03e79298 100644 --- a/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM4_XMC4_XMC4700_Relax_Kit_Keil/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) @@ -120,9 +120,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/blt_conf.h index 2c0e8b67..efc52570 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_CubeIDE/Boot/App/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/blt_conf.h index 5e42272f..4fb7962a 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_IAR/Boot/blt_conf.h index aed30965..8d4491eb 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_IAR/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_Keil/Boot/blt_conf.h index 105c2b0a..22feee9a 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_Keil/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_CubeIDE/Boot/App/blt_conf.h index 8127a06f..eb1903ca 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_CubeIDE/Boot/App/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -125,9 +125,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/blt_conf.h index 91ad18bd..9bc9fc78 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -125,9 +125,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_IAR/Boot/blt_conf.h index c1d178e8..fc563fb3 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_IAR/Boot/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -125,9 +125,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/blt_conf.h index acb8fbaa..4b76f981 100644 --- a/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/blt_conf.h @@ -72,9 +72,9 @@ /** \brief Enable/disable the NET transport layer. */ #define BOOT_COM_NET_ENABLE (1) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_NET_TX_MAX_DATA (64) +#define BOOT_COM_NET_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_NET_RX_MAX_DATA (64) +#define BOOT_COM_NET_RX_MAX_DATA (129) /** \brief Configure the port that the TCP/IP server listens on */ #define BOOT_COM_NET_PORT (1000) /** \brief Enable/disable DHCP client for automatically obtaining an IP address. */ @@ -125,9 +125,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_CubeIDE/Boot/App/blt_conf.h b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_CubeIDE/Boot/App/blt_conf.h index 26b7e73a..91d8aacf 100644 --- a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_CubeIDE/Boot/App/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_CubeIDE/Boot/App/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_GCC/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_GCC/Boot/blt_conf.h index 98495648..2c399059 100644 --- a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_GCC/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_GCC/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_IAR/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_IAR/Boot/blt_conf.h index b9e07941..d81f00df 100644 --- a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_IAR/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_IAR/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_Keil/Boot/blt_conf.h b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_Keil/Boot/blt_conf.h index 27303e73..27af78c6 100644 --- a/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_Keil/Boot/blt_conf.h +++ b/Target/Demo/ARMCM7_STM32H7_Nucleo_H743ZI_Keil/Boot/blt_conf.h @@ -110,9 +110,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (2) diff --git a/Target/Demo/HCS12_DevKit_S12G128_CodeWarrior/Boot/blt_conf.h b/Target/Demo/HCS12_DevKit_S12G128_CodeWarrior/Boot/blt_conf.h index 3aad69df..dde86cb0 100644 --- a/Target/Demo/HCS12_DevKit_S12G128_CodeWarrior/Boot/blt_conf.h +++ b/Target/Demo/HCS12_DevKit_S12G128_CodeWarrior/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) diff --git a/Target/Demo/HCS12_Evbplus_Dragon12p_CodeWarrior/Boot/blt_conf.h b/Target/Demo/HCS12_Evbplus_Dragon12p_CodeWarrior/Boot/blt_conf.h index 2d9f37a6..7501c3eb 100644 --- a/Target/Demo/HCS12_Evbplus_Dragon12p_CodeWarrior/Boot/blt_conf.h +++ b/Target/Demo/HCS12_Evbplus_Dragon12p_CodeWarrior/Boot/blt_conf.h @@ -97,9 +97,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (0) diff --git a/Target/Demo/_template/Boot/blt_conf.h b/Target/Demo/_template/Boot/blt_conf.h index b3b31b94..399d2ea6 100644 --- a/Target/Demo/_template/Boot/blt_conf.h +++ b/Target/Demo/_template/Boot/blt_conf.h @@ -82,9 +82,9 @@ /** \brief Configure the desired communication speed. */ #define BOOT_COM_RS232_BAUDRATE (57600) /** \brief Configure number of bytes in the target->host data packet. */ -#define BOOT_COM_RS232_TX_MAX_DATA (64) +#define BOOT_COM_RS232_TX_MAX_DATA (129) /** \brief Configure number of bytes in the host->target data packet. */ -#define BOOT_COM_RS232_RX_MAX_DATA (64) +#define BOOT_COM_RS232_RX_MAX_DATA (129) /** \brief Select the desired UART peripheral as a zero based index. */ #define BOOT_COM_RS232_CHANNEL_INDEX (1)