Refs #992. Reset RCC configuration in the demo bootloader's HAL_MspDeInit().

git-svn-id: https://svn.code.sf.net/p/openblt/code/trunk@745 5dc33758-31d5-4daf-9ae8-b24bf3d40d73

Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_GCC/Boot/main.c

@@ -195,6 +195,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOC, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_IAR/Boot/main.c

@@ -192,6 +192,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOC, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_Keil/Boot/main.c

@@ -195,6 +195,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOC, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM0_STM32F0_Discovery_STM32F051_TrueStudio/Boot/main.c

@@ -195,6 +195,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOC, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_GCC/Boot/main.c

@@ -212,6 +212,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_IAR/Boot/main.c

@@ -209,6 +209,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_Keil/Boot/main.c

@@ -212,6 +212,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM0_STM32F0_Nucleo_F091RC_TrueStudio/Boot/main.c

@@ -212,6 +212,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_GCC/Boot/main.c

@@ -197,6 +197,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_IAR/Boot/main.c

@@ -194,6 +194,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Nucleo_F103RB_TrueStudio/Boot/main.c

@@ -197,6 +197,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32H103_Crossworks/Boot/main.c

@@ -196,6 +196,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32H103_GCC/Boot/main.c

@@ -196,6 +196,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32H103_IAR/Boot/main.c

@@ -193,6 +193,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32H103_TrueStudio/Boot/main.c

@@ -196,6 +196,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOA);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_Crossworks/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_GCC/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_IAR/Boot/main.c

@@ -231,6 +231,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_Keil/Boot/main.c

@@ -233,6 +233,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM3_STM32F1_Olimex_STM32P103_TrueStudio/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_GCC/Boot/main.c

@@ -225,6 +225,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOD);
   LL_GPIO_DeInit(GPIOC);

Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_IAR/Boot/main.c

@@ -222,6 +222,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOD);
   LL_GPIO_DeInit(GPIOC);

Target/Demo/ARMCM3_STM32F1_Olimexino_STM32_TrueStudio/Boot/main.c

@@ -225,6 +225,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOD);
   LL_GPIO_DeInit(GPIOC);

Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_GCC/Boot/main.c

@@ -233,6 +233,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOF, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_IAR/Boot/main.c

@@ -230,6 +230,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOF, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM3_STM32F2_Olimex_STM32P207_TrueStudio/Boot/main.c

@@ -233,6 +233,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOF, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_GCC/Boot/main.c

@@ -203,6 +203,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_IAR/Boot/main.c

@@ -200,6 +200,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM4_STM32F3_Discovery_F303VC_TrueStudio/Boot/main.c

@@ -203,6 +203,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOE, LL_GPIO_PIN_8);
 

Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_GCC/Boot/main.c

@@ -214,6 +214,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_3);
 

Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_IAR/Boot/main.c

@@ -211,6 +211,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_3);
 

Target/Demo/ARMCM4_STM32F3_Nucleo_F303K8_TrueStudio/Boot/main.c

@@ -214,6 +214,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_3);
 

Target/Demo/ARMCM4_STM32F4_Olimex_STM32E407_GCC/Boot/main.c

@@ -239,6 +239,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM4_STM32F4_Olimex_STM32E407_IAR/Boot/main.c

@@ -236,6 +236,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM4_STM32F4_Olimex_STM32E407_TrueStudio/Boot/main.c

@@ -239,6 +239,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Deinit used GPIOs. */
   LL_GPIO_DeInit(GPIOC);
   LL_GPIO_DeInit(GPIOB);

Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_GCC/Boot/main.c

@@ -254,6 +254,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
 #if (BOOT_COM_USB_ENABLE > 0)
   /* USB clock disable. */
   LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_OTGFS);

Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_IAR/Boot/main.c

@@ -251,6 +251,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
 #if (BOOT_COM_USB_ENABLE > 0)
   /* USB clock disable. */
   LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_OTGFS);

Target/Demo/ARMCM4_STM32F4_Olimex_STM32P405_TrueStudio/Boot/main.c

@@ -254,6 +254,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
 #if (BOOT_COM_USB_ENABLE > 0)
   /* USB clock disable. */
   LL_AHB2_GRP1_DisableClock(LL_AHB2_GRP1_PERIPH_OTGFS);

Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_GCC/Boot/main.c

@@ -222,6 +222,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_IAR/Boot/main.c

@@ -219,6 +219,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM4_STM32L4_Nucleo_L476RG_TrueStudio/Boot/main.c

@@ -222,6 +222,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_5);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/main.c

@@ -235,6 +235,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_7);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_IAR/Boot/main.c

@@ -232,6 +232,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_7);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_Keil/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_7);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_TrueStudio/Boot/main.c

@@ -235,6 +235,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  LL_RCC_DeInit();
+  
   /* Reset GPIO pin for the LED to turn it off. */
   LL_GPIO_ResetOutputPin(GPIOB, LL_GPIO_PIN_7);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  HAL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_IAR/Boot/main.c

@@ -231,6 +231,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  HAL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_Keil/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  HAL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);
 

Target/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_TrueStudio/Boot/main.c

@@ -234,6 +234,9 @@ void HAL_MspInit(void)
 ****************************************************************************************/
 void HAL_MspDeInit(void)
 {
+  /* Reset the RCC clock configuration to the default reset state. */
+  HAL_RCC_DeInit();
+
   /* Reset GPIO pin for the LED to turn it off. */
   HAL_GPIO_WritePin(GPIOB, GPIO_PIN_7, GPIO_PIN_RESET);