/************************************************************************************//** * \file Source/TRICORE_TC2/mbrtu.c * \brief Bootloader Modbus RTU communication interface source file. * \ingroup Target_TRICORE_TC2 * \internal *---------------------------------------------------------------------------------------- * C O P Y R I G H T *---------------------------------------------------------------------------------------- * Copyright (c) 2023 by Feaser http://www.feaser.com All rights reserved * *---------------------------------------------------------------------------------------- * L I C E N S E *---------------------------------------------------------------------------------------- * This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or * modify it under the terms of the GNU General Public License as published by the Free * Software Foundation, either version 3 of the License, or (at your option) any later * version. * * OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR * PURPOSE. See the GNU General Public License for more details. * * You have received a copy of the GNU General Public License along with OpenBLT. It * should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy. * * \endinternal ****************************************************************************************/ /**************************************************************************************** * Include files ****************************************************************************************/ #include "boot.h" /* bootloader generic header */ #if (BOOT_COM_MBRTU_ENABLE > 0) #include "Stm/Std/IfxStm.h" /* STM driver */ #include "IfxAsclin.h" /* ASCLIN basic driver */ /**************************************************************************************** * Macro definitions ****************************************************************************************/ /** \brief Timeout for transmitting a byte in milliseconds. */ #define MBRTU_BYTE_TX_TIMEOUT_MS (10u) /* Map the configured UART channel index to the TriCore's ASCLIN peripheral. */ #if (BOOT_COM_MBRTU_CHANNEL_INDEX == 0) /** \brief Set UART base address to ASCLIN0. */ #define ASCLIN_CHANNEL &MODULE_ASCLIN0 #elif (BOOT_COM_MBRTU_CHANNEL_INDEX == 1) /** \brief Set UART base address to ASCLIN1. */ #define ASCLIN_CHANNEL &MODULE_ASCLIN1 #elif (BOOT_COM_MBRTU_CHANNEL_INDEX == 2) /** \brief Set UART base address to ASCLIN2. */ #define ASCLIN_CHANNEL &MODULE_ASCLIN2 #elif (BOOT_COM_MBRTU_CHANNEL_INDEX == 3) /** \brief Set UART base address to ASCLIN3 */ #define ASCLIN_CHANNEL &MODULE_ASCLIN3 #endif /**************************************************************************************** * Global data declarations ****************************************************************************************/ /** \brief Specifies the UART Rx pin. It is expected that the application overwrites this * value with the correct one, before BootInit() is called. */ IfxAsclin_Rx_In * mbRtuRxPin = NULL_PTR; /** \brief Specifies the UART Tx pin. It is expected that the application overwrites this * value with the correct one, before BootInit() is called. */ IfxAsclin_Tx_Out * mbRtuTxPin = NULL_PTR; /**************************************************************************************** * Local data declarations ****************************************************************************************/ /** \brief Stores the number of free running counter ticks that represents the 3.5 * character delay time (T3_5) for Modbus RTU. */ static blt_int16u mbRtuT3_5Ticks; /**************************************************************************************** * Function prototypes ****************************************************************************************/ static blt_bool MbRtuReceiveByte(blt_int8u *data); static void MbRtuTransmitByte(blt_int8u data, blt_bool end_of_packet); /************************************************************************************//** ** \brief Initializes the Modbus RTU communication interface. ** \attention It is the application's responsibility to initialize a timer peripheral ** to have an upwards counting free running counter, which runs at 100 kHz. ** \return none. ** ****************************************************************************************/ void MbRtuInit(void) { blt_int16u startTimeTicks; blt_int16u deltaTimeTicks; blt_int16u currentTimeTicks; blt_int8u rxDummy; /* The current implementation supports ASCLIN0 - ASCLIN3. Throw an assertion error in * case a different channel is configured. */ ASSERT_CT((BOOT_COM_MBRTU_CHANNEL_INDEX == 0) || (BOOT_COM_MBRTU_CHANNEL_INDEX == 1) || (BOOT_COM_MBRTU_CHANNEL_INDEX == 2) || (BOOT_COM_MBRTU_CHANNEL_INDEX == 3)); /* calculate the 3.5 character delay time in free running counter ticks. note that * the free running counter runs at 100 kHz, so one tick is 10 us. For baudrates > * 19200 bps, it can be fixed to 1750 us. */ if (BOOT_COM_MBRTU_BAUDRATE > 19200) { /* set T3_5 time to a fixed value of 1750 us. */ mbRtuT3_5Ticks = 175; } /* calculate the T3_5 time, because the baudrate is <= 19200 bps. */ else { /* T3_5 [us * 10] = 3.5 * Tchar = 3.5 * 11 * 100000 / baudrate = 3850000 / baudrate. * make sure to do integer round up though. Make sure to add 1 to adjust for 10us * timer resolution inaccuracy. */ mbRtuT3_5Ticks = (blt_int16u)(((3850000UL + (BOOT_COM_MBRTU_BAUDRATE - 1U)) / BOOT_COM_MBRTU_BAUDRATE) + 1); } /* Enable the ASCLIN module. */ IfxAsclin_enableModule(ASCLIN_CHANNEL); /* Disable the clock before configuring the GPIO pins. */ IfxAsclin_setClockSource(ASCLIN_CHANNEL, IfxAsclin_ClockSource_noClock); /* Configure the ASCLIN UART Tx and Rx pins. */ IfxAsclin_initRxPin(mbRtuRxPin, IfxPort_InputMode_pullUp, IfxPort_PadDriver_cmosAutomotiveSpeed1); IfxAsclin_initTxPin(mbRtuTxPin, IfxPort_OutputMode_pushPull, IfxPort_PadDriver_cmosAutomotiveSpeed1); /* Enter initialization mode. */ IfxAsclin_setFrameMode(ASCLIN_CHANNEL, IfxAsclin_FrameMode_initialise); /* Temporarily enable the clock source for the baudrate configuration. */ IfxAsclin_setClockSource(ASCLIN_CHANNEL, IfxAsclin_ClockSource_ascFastClock); /* Configure the baudrate generator prescaler. */ IfxAsclin_setPrescaler(ASCLIN_CHANNEL, 1); /* Configure the communication speed, while using an oversampling of 16 bits and sample * three bits in the middle (7,8 and 9). */ (void)IfxAsclin_setBitTiming(ASCLIN_CHANNEL, (float32)BOOT_COM_MBRTU_BAUDRATE, IfxAsclin_OversamplingFactor_16, IfxAsclin_SamplePointPosition_9, IfxAsclin_SamplesPerBit_three); /* Disable the clock again for now. */ IfxAsclin_setClockSource(ASCLIN_CHANNEL, IfxAsclin_ClockSource_noClock); /* Disable loopback mode. */ IfxAsclin_enableLoopBackMode(ASCLIN_CHANNEL, FALSE); /* Configure shift direction. */ IfxAsclin_setShiftDirection(ASCLIN_CHANNEL, IfxAsclin_ShiftDirection_lsbFirst); /* Disable idle delay. */ IfxAsclin_setIdleDelay(ASCLIN_CHANNEL, IfxAsclin_IdleDelay_0); /* Configure frame format format. */ #if (BOOT_COM_MBRTU_PARITY == 0) IfxAsclin_enableParity(ASCLIN_CHANNEL, FALSE); #elif (BOOT_COM_MBRTU_PARITY == 1) IfxAsclin_enableParity(ASCLIN_CHANNEL, TRUE); IfxAsclin_setParityType(ASCLIN_CHANNEL, IfxAsclin_ParityType_odd); #else IfxAsclin_enableParity(ASCLIN_CHANNEL, TRUE); IfxAsclin_setParityType(ASCLIN_CHANNEL, IfxAsclin_ParityType_even); #endif #if (BOOT_COM_MBRTU_STOPBITS == 1) IfxAsclin_setStopBit(ASCLIN_CHANNEL, IfxAsclin_StopBit_1); #else IfxAsclin_setStopBit(ASCLIN_CHANNEL, IfxAsclin_StopBit_2); #endif IfxAsclin_setDataLength(ASCLIN_CHANNEL, IfxAsclin_DataLength_8); /* Configure transmit FIFO. Use the "Combined Mode", 8-bit wide write and generate a * refill event when the filling level falls to 15 or below. */ IfxAsclin_setTxFifoInletWidth(ASCLIN_CHANNEL, IfxAsclin_TxFifoInletWidth_1); IfxAsclin_setTxFifoInterruptLevel(ASCLIN_CHANNEL, IfxAsclin_TxFifoInterruptLevel_15); /* Configure the receive FIFO. Use the "Combined Mode", 8-bit wide read and generate * a drain event when the filling level rises to 1 or above. */ IfxAsclin_setRxFifoOutletWidth(ASCLIN_CHANNEL, IfxAsclin_RxFifoOutletWidth_1); IfxAsclin_setRxFifoInterruptLevel(ASCLIN_CHANNEL, IfxAsclin_RxFifoInterruptLevel_1); /* Leave initialization mode and switch to ASC mode. */ IfxAsclin_setFrameMode(ASCLIN_CHANNEL, IfxAsclin_FrameMode_asc); /* Enable the clock source. */ IfxAsclin_setClockSource(ASCLIN_CHANNEL, IfxAsclin_ClockSource_ascFastClock); /* Disable and clear all event flags. */ IfxAsclin_disableAllFlags(ASCLIN_CHANNEL); IfxAsclin_clearAllFlags(ASCLIN_CHANNEL); /* Enable the transmit and receive FIFOs. */ IfxAsclin_enableRxFifoInlet(ASCLIN_CHANNEL, TRUE); IfxAsclin_enableTxFifoOutlet(ASCLIN_CHANNEL, TRUE); /* Flush the FIFOs. */ IfxAsclin_flushRxFifo(ASCLIN_CHANNEL); IfxAsclin_flushTxFifo(ASCLIN_CHANNEL); /* enable the receiver output to be able to receive. */ MbRtuDriverOutputControlHook(BLT_FALSE); /* wait for idle line detection. This is T3_5 time after reception of the last byte. */ startTimeTicks = MbRtuFreeRunningCounterGet(); do { /* service the watchdog. */ CopService(); /* get the current value of the free running counter. */ currentTimeTicks = MbRtuFreeRunningCounterGet(); /* check if a byte was received while waiting for the idle line. */ if (MbRtuReceiveByte(&rxDummy) == BLT_TRUE) { /* restart the idle line detection. */ startTimeTicks = currentTimeTicks; } /* calculate the number of ticks that elapsed since the start or since the last * byte reception. Note that this calculation works, even if the free running counter * overflowed. */ deltaTimeTicks = currentTimeTicks - startTimeTicks; } while (deltaTimeTicks < mbRtuT3_5Ticks); } /*** end of MbRtuInit ***/ /************************************************************************************//** ** \brief Transmits a packet formatted for the communication interface. ** \param data Pointer to byte array with data that it to be transmitted. ** \param len Number of bytes that are to be transmitted. ** \return none. ** ****************************************************************************************/ void MbRtuTransmitPacket(blt_int8u *data, blt_int8u len) { blt_int16u data_index; blt_int16u checksum; blt_bool endOfPacket = BLT_FALSE; /* Made static to lower stack load and +5 for Modbus RTU packet overhead. */ static blt_int8u txPacket[BOOT_COM_MBRTU_TX_MAX_DATA + 5]; /* On Modbus RTU, there must always be a T3_5 time separation between packet trans- * missions. * * This bootloader uses XCP packets embedded in Modbus RTU packets. The XCP * communication is always request / response based. That means that this packet is * a response packet and it will only be sent, after the reception of a request packet. * * A response packet is only deemed valid, after the T3_5 idle time. This module * implements the T3_5 end-of-packet time event detection. Consequently, it is already * guaranteed that there is T3_5 between subsequent packet transmissions. As such, no * further T3_5 wait time is needed here. */ /* verify validity of the len-parameter */ ASSERT_RT(len <= BOOT_COM_MBRTU_TX_MAX_DATA); /* construct the Modbus RTU packet. start by adding the slave address. */ txPacket[0] = BOOT_COM_MBRTU_NODE_ID; /* add the user-defined function code for embedding XCP packets. */ txPacket[1] = BOOT_COM_MBRTU_FCT_CODE_USER_XCP; /* add the XCP packet length. */ txPacket[2] = len; /* copy the XCP packet data. */ CpuMemCopy((blt_int32u)&txPacket[3], (blt_int32u)data, len); /* calculate the checksum for the packet, including slave address, function code and * extra XCP length. */ checksum = MbRtuCrcCalculate(&txPacket[0], len + 3); /* add the checksum at the end of the packet */ txPacket[len + 3] = (blt_int8u)(checksum & 0xff); txPacket[len + 4] = (blt_int8u)(checksum >> 8); /* enable the driver output to be able to send. just make sure to wait a little around * the togglng of the DE/NRE pin. */ MbRtuDelay(BOOT_COM_MBRTU_DRIVER_OUTPUT_ENABLE_DELAY_US); MbRtuDriverOutputControlHook(BLT_TRUE); MbRtuDelay(BOOT_COM_MBRTU_DRIVER_OUTPUT_ENABLE_DELAY_US); /* transmit all the packet bytes one-by-one */ for (data_index = 0; data_index < (len + 5); data_index++) { /* keep the watchdog happy */ CopService(); /* last byte of the packet? */ if (data_index == ((len + 5) - 1)) { /* update the end of packet flag. */ endOfPacket = BLT_TRUE; } /* write byte */ MbRtuTransmitByte(txPacket[data_index], endOfPacket); } /* enable the receiver output to be able to receive again. just make sure to wait a * little around the togglng of the DE/NRE pin. */ MbRtuDelay(BOOT_COM_MBRTU_DRIVER_OUTPUT_DISABLE_DELAY_US); MbRtuDriverOutputControlHook(BLT_FALSE); MbRtuDelay(BOOT_COM_MBRTU_DRIVER_OUTPUT_DISABLE_DELAY_US); } /*** end of MbRtuTransmitPacket ***/ /************************************************************************************//** ** \brief Receives a communication interface packet if one is present. ** \param data Pointer to byte array where the data is to be stored. ** \param len Pointer where the length of the packet is to be stored. ** \return BLT_TRUE if a packet was received, BLT_FALSE otherwise. ** ****************************************************************************************/ blt_bool MbRtuReceivePacket(blt_int8u *data, blt_int8u *len) { blt_bool result = BLT_FALSE; blt_int8u rxByte; blt_int16u currentTimeTicks; blt_int16u deltaTimeTicks; blt_int16u checksumCalculated; blt_int16u checksumReceived; /* Made static to lower stack load and +5 for Modbus RTU packet overhead. */ static blt_int8u rxPacket[BOOT_COM_MBRTU_RX_MAX_DATA + 5]; static blt_int8u rxLength = 0; static blt_bool packetRxInProgress = BLT_FALSE; static blt_int16u lastRxByteTimeTicks = 0; /* get the current value of the free running counter. */ currentTimeTicks = MbRtuFreeRunningCounterGet(); /* check for a newly received byte. */ if (MbRtuReceiveByte(&rxByte) == BLT_TRUE) { /* store the time at which the byte was received. */ lastRxByteTimeTicks = currentTimeTicks; /* is this the potential start of a new packet? */ if (packetRxInProgress == BLT_FALSE) { /* initialize the reception of a new packet. */ rxLength = 0; packetRxInProgress = BLT_TRUE; } /* store the newly received byte in the buffer, with buffer overrun protection. */ if (rxLength < (sizeof(rxPacket)/sizeof(rxPacket[0]))) { rxPacket[rxLength] = rxByte; rxLength++; } /* buffer overrun occurred. received packet was longer than supported so discard * the packet to try and sync to the next one. */ else { /* discard the partially received packet. */ packetRxInProgress = BLT_FALSE; } } /* only attempt to detect the end of packet, when a reception is in progress. */ if (packetRxInProgress == BLT_TRUE) { /* calculate the number of ticks that elapsed since the last byte reception. note * that this calculation works, even if the free running counter overflowed. */ deltaTimeTicks = currentTimeTicks - lastRxByteTimeTicks; /* packet reception is assumed complete after T3_5 of not receiving new data. */ if (deltaTimeTicks >= mbRtuT3_5Ticks) { /* a Modbus RTU packet consists of at least the address field, function code and * 16-bit CRC. Validate the packet length based on this info. */ if (rxLength >= 4) { /* calculate the packet checksum. */ checksumCalculated = MbRtuCrcCalculate(&rxPacket[0], rxLength - 2); /* extract the checksum received with the packet. */ checksumReceived = rxPacket[rxLength - 2] | (rxPacket[rxLength - 1] << 8); /* only continue with packet processing if the checksums match. */ if (checksumCalculated == checksumReceived) { /* we are only interested in Modbus RTU packets that are addressed to us and * have an XCP packet embedded. */ if ( (rxPacket[0] == BOOT_COM_MBRTU_NODE_ID) && (rxPacket[1] == BOOT_COM_MBRTU_FCT_CODE_USER_XCP) ) { /* An XCP packet embedded in a Modbus RTU packet has an extra XCP packet * length value. Use it to double-check that the packet length is valid. */ if (rxPacket[2] == (rxLength - 5)) { /* copy the packet's XCP data. */ CpuMemCopy((blt_int32u)data, (blt_int32u)&rxPacket[3], rxLength - 5); /* set the packet's XCP length. */ *len = rxLength - 5; /* update the result to success to indicate that this XCP packet is ready * for processing. */ result = BLT_TRUE; } } } } /* reset the packet reception in progress flag, to be able to receive the next. */ packetRxInProgress = BLT_FALSE; } } /* give the result back to the caller. */ return result; } /*** end of MbRtuReceivePacket ***/ /************************************************************************************//** ** \brief Receives a communication interface byte if one is present. ** \param data Pointer to byte where the data is to be stored. ** \return BLT_TRUE if a byte was received, BLT_FALSE otherwise. ** ****************************************************************************************/ static blt_bool MbRtuReceiveByte(blt_int8u *data) { blt_bool result = BLT_FALSE; /* poll the receive FIFO level to see if new data is available. */ if (IfxAsclin_getRxFifoFillLevel(ASCLIN_CHANNEL) > 0) { /* update the result */ result = BLT_TRUE; /* check for a frame error. the frame error check is important because it can detect * a missing stopbit. on an RS485 bus without bias resistors, the A-B differential * voltage is 0. for an RS485 transceiver this is neither a 0 nor a 1 bit, so * undefined. most RS485 transceivers feature a reception failsafe function to drive * the Rx output (going to the UART Rx) to a defined state of logic 1. in case the * used RS485 transceiver doesn't have such a feature, it typically leaves the Rx * output in a logic 0 state. this means that after the stop bit of the last packet * byte, the UART Rx input sees a logic 0, and assumes it is a start bit. the * remaining data bits will always be 0 and, most importantly no stop bit is * present, causing a framing error. Long story short: if you don't check for the * framing error flag, you might receive an extra byte with value 0, which is not * actually transmitted on the RS485 bus. you can catch and ignore this byte by doing * a frame error check. */ if (IfxAsclin_getFrameErrorFlagStatus(ASCLIN_CHANNEL) != 0) { /* clear the frame error flag. */ IfxAsclin_clearFrameErrorFlag(ASCLIN_CHANNEL); /* ignore the byte because of a detected frame error. */ result = BLT_FALSE; } #if (BOOT_COM_MBRTU_PARITY > 0) /* check for a parity error. */ if (IfxAsclin_getParityErrorFlagStatus(ASCLIN_CHANNEL) != 0) { /* clear the parity error flag. */ IfxAsclin_clearParityErrorFlag(ASCLIN_CHANNEL); /* ignore the byte because of a detected parity error. */ result = BLT_FALSE; } #endif /* retrieve and store the newly received byte */ (void)IfxAsclin_read8(ASCLIN_CHANNEL, data, 1); } /* give the result back to the caller */ return result; } /*** end of MbRtuReceiveByte ***/ /************************************************************************************//** ** \brief Transmits a communication interface byte. ** \param data Value of byte that is to be transmitted. ** \param end_of_packet BLT_TRUE if this is the last byte of the packet, BLT_FALSE ** otherwise. ** \return none. ** ****************************************************************************************/ static void MbRtuTransmitByte(blt_int8u data, blt_bool end_of_packet) { blt_int32u timeout; /* clear the transmit completed flag. */ IfxAsclin_clearTransmissionCompletedFlag(ASCLIN_CHANNEL); /* write the data value to the ASCLIN peripheral's transmit FIFO. */ (void)IfxAsclin_write8(ASCLIN_CHANNEL, &data, 1); /* set timeout time to wait for transmit completion. */ timeout = TimerGet() + MBRTU_BYTE_TX_TIMEOUT_MS; /* not the last byte of the packet? */ if (end_of_packet == BLT_FALSE) { /* wait for the transmit FIFO to be empty. */ while (IfxAsclin_getTxFifoFillLevel(ASCLIN_CHANNEL) != 0) { /* keep the watchdog happy. */ CopService(); /* break loop upon timeout. this would indicate a hardware failure. */ if (TimerGet() > timeout) { break; } } } /* this is the last byte of a packet. */ else { /* wait for tx complete flag to be set. this is needed for the last byte, otherwise * the transceiver's transmit output gets disabled with * MbRtuDriverOutputControlHook() before the byte reception completes. */ while (IfxAsclin_getTransmissionCompletedFlagStatus(ASCLIN_CHANNEL) != 0) { /* keep the watchdog happy. */ CopService(); /* break loop upon timeout. this would indicate a hardware failure. */ if (TimerGet() > timeout) { break; } } } } /*** end of MbRtuTransmitByte ***/ /************************************************************************************//** ** \brief Obtains the counter value of the 100 kHz free running counter. Note that ** each count represent 10 us. The Modbus RTU communication module uses this ** free running counter for Modbus RTU packet timing related purposes. The ** already available 1 ms timer does not have the needed resolution for this ** purpose. ** \return Current value of the free running counter. ** ****************************************************************************************/ blt_int16u MbRtuFreeRunningCounterGet(void) { static blt_bool initialized = BLT_FALSE; static blt_int32u counts_per_ten_us = 0; static blt_int32u free_running_counter_last = 0; static blt_int16u ten_us_tick_counter = 0; blt_int32u free_running_counter_now; blt_int32u delta_counts; blt_int32u ten_us_ticks; /* perform one-time initialization.*/ if (initialized == BLT_FALSE) { /* set the flag to make sure that this part only runs once. */ initialized = BLT_TRUE; /* calculate how many counts of the SysTick's free running counter equals 10us, * because one count of a 100 kHz counter equals that. Note that the timer module * already initialized and enabled the SysTick. */ counts_per_ten_us = IfxStm_getFrequency(&MODULE_STM0) / 100000U; /* initialize current value of the timer's free running counter. */ free_running_counter_last = IfxStm_getLower(&MODULE_STM0); } /* get the current value of the free running counter. */ free_running_counter_now = IfxStm_getLower(&MODULE_STM0); /* Calculate the number of counts that passed since the detection of the last * millisecond event. Keep in mind that the SysTick has a down-counting 24-bit free * running counter. Note that this calculation also works, in case the free running * counter overflowed, thanks to integer math. */ delta_counts = free_running_counter_now - free_running_counter_last; /* did one or more ten microsecond counts pass since the last event? */ if (delta_counts >= counts_per_ten_us) { /* calculate how many ten microsecond counts passed. */ ten_us_ticks = delta_counts / counts_per_ten_us; /* update the counter. */ ten_us_tick_counter += ten_us_ticks; /* store the counter value of the last event to detect the next one. */ free_running_counter_last += (ten_us_ticks * counts_per_ten_us); } /* return the current value of the 100 kHz free running counter to the caller. */ return ten_us_tick_counter; } /*** end of MbRtuFreeRunningCounterGet ***/ #endif /* BOOT_COM_MBRTU_ENABLE > 0 */ /*********************************** end of mbrtu.c ************************************/