mirror of https://github.com/rusefi/opendbc.git
GM: add a cluster speed signal (#780)
* Add cluster speed signal * add the counter * add comment * gen
This commit is contained in:
parent
d103b156b3
commit
2922a0507d
|
@ -174,6 +174,10 @@ BO_ 532 BRAKE_RELATED: 6 XXX
|
|||
BO_ 560 EPBStatus: 8 EPB
|
||||
SG_ EPBClosed : 12|1@0+ (1,0) [0|1] "" NEO
|
||||
|
||||
BO_ 608 SPEED_RELATED: 8 XXX
|
||||
SG_ RollingCounter : 5|2@0+ (1,0) [0|0] "" XXX
|
||||
SG_ ClusterSpeed : 31|8@0+ (1,0) [0|0] "" XXX
|
||||
|
||||
BO_ 711 BECMBatteryVoltageCurrent: 6 K17_EBCM
|
||||
SG_ HVBatteryVoltage : 31|12@0+ (0.125,0) [0|511.875] "V" NEO
|
||||
SG_ HVBatteryCurrent : 12|13@0- (0.15,0) [-614.4|614.25] "A" NEO
|
||||
|
@ -290,6 +294,7 @@ CM_ SG_ 481 ACCAlwaysOne "Usually 1 if the car is equipped with ACC";
|
|||
CM_ SG_ 497 Ignition "Describes ignition + preconditioning mode, noisy";
|
||||
CM_ SG_ 501 PRNDL2 "When ManualMode is Active, Value is 13=L1 12=L2 11=L3 ... 4=L10";
|
||||
CM_ SG_ 532 UserBrakePressure "can be lower than other brake position signals when the brakes are pre-filled from ACC braking and the user presses on the brakes. user-only pressure?";
|
||||
CM_ SG_ 608 ClusterSpeed "Cluster speed signal seems to match dash on newer cars, but is a lower rate and can be noisier.";
|
||||
CM_ SG_ 761 UserBrakePressure2 "Similar to BRAKE_RELATED->UserBrakePressure";
|
||||
CM_ SG_ 1001 VehicleSpeed "Spinouts show here on 2wd. Speed derived from right front wheel (drive tire)";
|
||||
BA_DEF_ "UseGMParameterIDs" INT 0 0;
|
||||
|
|
|
@ -194,6 +194,10 @@ BO_ 532 BRAKE_RELATED: 6 XXX
|
|||
BO_ 560 EPBStatus: 8 EPB
|
||||
SG_ EPBClosed : 12|1@0+ (1,0) [0|1] "" NEO
|
||||
|
||||
BO_ 608 SPEED_RELATED: 8 XXX
|
||||
SG_ RollingCounter : 5|2@0+ (1,0) [0|0] "" XXX
|
||||
SG_ ClusterSpeed : 31|8@0+ (1,0) [0|0] "" XXX
|
||||
|
||||
BO_ 711 BECMBatteryVoltageCurrent: 6 K17_EBCM
|
||||
SG_ HVBatteryVoltage : 31|12@0+ (0.125,0) [0|511.875] "V" NEO
|
||||
SG_ HVBatteryCurrent : 12|13@0- (0.15,0) [-614.4|614.25] "A" NEO
|
||||
|
@ -310,6 +314,7 @@ CM_ SG_ 481 ACCAlwaysOne "Usually 1 if the car is equipped with ACC";
|
|||
CM_ SG_ 497 Ignition "Describes ignition + preconditioning mode, noisy";
|
||||
CM_ SG_ 501 PRNDL2 "When ManualMode is Active, Value is 13=L1 12=L2 11=L3 ... 4=L10";
|
||||
CM_ SG_ 532 UserBrakePressure "can be lower than other brake position signals when the brakes are pre-filled from ACC braking and the user presses on the brakes. user-only pressure?";
|
||||
CM_ SG_ 608 ClusterSpeed "Cluster speed signal seems to match dash on newer cars, but is a lower rate and can be noisier.";
|
||||
CM_ SG_ 761 UserBrakePressure2 "Similar to BRAKE_RELATED->UserBrakePressure";
|
||||
CM_ SG_ 1001 VehicleSpeed "Spinouts show here on 2wd. Speed derived from right front wheel (drive tire)";
|
||||
BA_DEF_ "UseGMParameterIDs" INT 0 0;
|
||||
|
|
Loading…
Reference in New Issue