Uwe Hermann: Simplify the manpage by removing lots of redundant information which is

already in the README or texinfo (and which needs to be updated
relatively often -- list of authors, list of supported JTAG devices etc).

git-svn-id: svn://svn.berlios.de/openocd/trunk@379 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
oharboe 2008-02-28 13:04:49 +00:00
parent e916cc840d
commit 6d0aa6dc05
1 changed files with 9 additions and 52 deletions

View File

@ -1,58 +1,24 @@
.TH "OPENOCD" "1" "July 26, 2007" "" ""
.TH "OPENOCD" "1" "February 28, 2008"
.SH "NAME"
openocd \- A free and open on\-chip debugging, in\-system programming and
boundary\-scan testing tool for ARM systems (currently ARM7/9, XScale, and Cortex\-M3)
boundary\-scan testing tool for ARM systems
.SH "SYNOPSIS"
.B openocd \fR[\fB\-fdlh\fR] [\fB\-\-file\fR <filename>] [\fB\-\-debug\fR <debuglevel>] [\fB\-\-log_output\fR <filename>] [\fB\-\-help]
.B openocd \fR[\fB\-fdlh\fR] [\fB\-\-file\fR <filename>] [\fB\-\-debug\fR <debuglevel>] [\fB\-\-log_output\fR <filename>] [\fB\-\-help\fR]
.SH "DESCRIPTION"
.B OpenOCD
is an on\-chip debugging, in\-system programming and boundary\-scan
testing tool for ARM systems.
.PP
The debugger uses an IEEE 1149\-1 compliant JTAG TAP bus master to access
on\-chip debug functionality available on ARM7/9, XScale, and Cortex-M3 based
on\-chip debug functionality available on ARM7/9, XScale, Cortex-M3, and
Marvell Feroceon (as found in the Orion SoC family) based
microcontrollers / system\-on\-chip solutions.
.PP
User interaction is realized through a telnet command line interface and
a gdb (the GNU debugger) remote protocol server.
.PP
OpenOCD supports various different types of JTAG interfaces/programmers:
* Parallel port wigglers, e.g.
* Macraigor Wiggler JTAG cable
* Gateworks GW16012 JTAG programmer
* Xilinx DLC5 JTAG parallel cable III
* Ka-Ro TRITON starterkit II JTAG cable
* Lattice parallel port JTAG cable
* ST FlashLINK programming cable
* Amontec JTAG Accelerator
* FTDI FT2232 based USB devices
* USBJTAG
* OOCD\-Link
* Amontec JTAGkey
* Amontec JTAGkey\-Tiny
* Olimex ARM\-USB\-OCD
* eVerve Signalyzer
* TinCanTools 'Flyswatter'
* Turtelizer 2
* Hitex STR9-comSTICK
* Luminary Micro evb_lm3s811
* ASIX PRESTO
* usbprog
.PP
It also supports a number of different ARM7/9 cores:
* ARM7TDMI(\-s)
* ARM720t
* ARM9TDMI
* ARM920t
* ARM922t
* ARM926ej\-s
* ARM966e
* Cortex-M3
.PP
Support for Intel XScale CPUs is also included:
* PXA25x
* PXA27x
* IXP42x
OpenOCD supports various different types of JTAG interfaces/programmers,
please check the README for the complete list.
.SH "OPTIONS"
.TP
.B "\-f, \-\-file <filename>"
@ -95,19 +61,10 @@ or on the mailing list
.SH "LICENCE"
.B OpenOCD
is covered by the GNU General Public License (GPL), version 2 or later.
.\"
.SH "SEE ALSO"
.BR jtag (1)
.SH "AUTHORS"
Dominic Rath <Dominic.Rath@gmx.de>
.br
Magnus Lundin <lundin@mlu.mine.nu>
.br
Michael Fischer <fischermi@t\-online.de>
.br
Spencer Oliver <spen@spen\-soft.co.uk>
.br
and others
Please see the file AUTHORS.
.PP
This manual page was written by Uwe Hermann <uwe@hermann\-uwe.de>.
It is licensed under the terms of the GNU GPL (v2 or later).
It is licensed under the terms of the GNU GPL (version 2 or later).