Commit Graph

168 Commits

Author SHA1 Message Date
Ethan Eade 8b049fdba5 scripts: Phytec/LPC2350 config scripts
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-02-04 10:25:44 +01:00
Harald Kipp 18969466c9 AT91R40008/Ethernut 3 configuration
Moved board specific settings from target/at91r40008.cfg to a new
file board/ethernut3.cfg.

Set correct CPUTAPID.  Reset delay increased, see MIC2775 data sheet.
Increased work area size from 16k to 128k.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 11:09:53 -08:00
Edgar Grimberg cc440ca1d4 tcl/str7x: Reset init unlocks the flash
For STR7x flash, the device cannot be queried for the protect status.
The solution is to remove the protection on reset init. The driver
also initialises the sector protect field to unprotected.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 09:30:33 -08:00
Edgar Grimberg 503f6139c7 flash/str7x: After reset init the flash is unlocked
The default state of the STR7 flash after a reset init is unlocked.
The information in the flash driver now reflects this.

The information about the lock status cannot be read from the
flash chip, so the user is informed that flash info might not
contain accurate information.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 09:30:33 -08:00
Edgar Grimberg dfba7fa949 interface: Changed parport address to LPT1
Changed the parport address to LPT1, since it's the most obvious default value.

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
2010-01-21 15:58:59 +01:00
David Brownell 22d25e6921 board configs -- unique names for flash chips
Don't give the same names to both flash chips on two OMAP boards.

For OSK, enable DCC downloads (removing a warning).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 10:46:53 -08:00
Michael Grzeschik d036f17001 tcl/target/at91sam3u4e.cfg: changed case in dependent file
openocd does not start with the target configfile due to the case in the
dependent config file.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 10:32:53 -08:00
Vladimir Zapolskiy 1de107a5a2 Added Openmoko USB JTAG interface config file.
Added interface config file for JTAG/RS232 debug board originally
integrated to Neo 1973 and Neo FreeRunner phones.
Adapter was tested with i.MX31, S3C2410 and AT91SAM9260 processors.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
2010-01-11 15:58:13 +01:00
David Brownell ff647e6bb4 parport (mostly) doc fixes
The "parport_port" commands generally don't *require* a port_number;
they're of the "apply any parameter, then print result" variety.  Update
the User's Guide accordingly.

Some of those commands are intended to be write-once: parport_port,
and parport_cable.  Say so.

Use proper EBNF for the parport_write_on_exit parameter.

Parport address 0xc8b8 is evidently mutant.  Say so in the "parport.cfg"
file, to avoid breaking anyone with that mutant config.  But update the
User's Guide to include a sane example for the LP2 port.

Finally document the "presto_serial" command.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09 21:56:11 -08:00
Spencer Oliver ba96fc3e9d PIC32: enable ram execution
add reset-init script to allow ram execution from reset, this is required for ejtag fastdata access.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-01-05 19:54:37 +00:00
Antonio Borneo 668f20d0ab Added ST FlashLINK interface config file.
The relevant cable config is already in OpenOCD, but not a config for
the JTAG adapter.  I have tested with FlashLINK on ARM926.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02 01:50:57 -08:00
Antonio Borneo c116d8f6bc Fix parport_dcl5 config file.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2009-12-30 19:07:44 +01:00
Piotr Esden-Tempski d4bef466c3 Added Open-BLDC board config file. 2009-12-29 12:41:43 +01:00
Piotr Esden-Tempski aa81462618 Added floss-jtag interface config file. 2009-12-29 12:41:43 +01:00
David Brownell ec297e4bf1 Fix Luminary FT2232 layout docs/configs
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 12:59:47 -08:00
David Brownell 3ace333663 create tcl/board/dm365evm.cfg
This config is only lightly tested, and doesn't work well yet;
but it's a start.

 * Notably missing is PLL configuration, since each DaVinci
   does that just a bit differently; and thus DDR2 setup.

 * The SRST workaround needed for the goof in the CPLD's VHDL
   depends on at least the not-yet-merged patch letting ARM9
   (and ARM7) chips perform resets that don't use SRST.

So this isn't yet suitable for debugging U-Boot.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-27 12:16:55 -08:00
Catalin Patulea 84dbf8ab5a Driver for USB-JTAG, Altera USB-Blaster and compatibles
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 15:05:06 -08:00
Dean Glazeski 900d745567 Olimex SAM9-L9260 board configuration update.
This updates the board configuration for the SAM9-L9260 board with the
configuration for the on-board NAND and dataflash.  Included are commands
for configuring the AT91SAM9 NAND flash driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 13:08:24 -08:00
Spencer Oliver 3616b93eee target.cfg: update to use new flash configuration syntax
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2009-12-17 11:39:09 +00:00
David Brownell 960ad2f776 Remove duplicate Olimex-"tiny" interface
We already have tcl/interface/olimex-jtag-tiny.cfg and
don't need a clone of it.
2009-12-16 14:21:06 -08:00
David Brownell 4a2f4e3433 more tcl/{board,target} cleanup
Remove more remnants of the old "jtag_device" syntax.

Don't [format "%s.cpu" $_CHIPNAME] ... it's needless complexity.

Remove various non-supported "-variant" target options; they're not
needed often at all.

Flag some of the board files as needing to have and use target files
for the TAP and target declarations.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
David Brownell 80a757d82e testing/examples/.../*cfg: rm jtag_device calls
That syntax has been obsolete forever and is now gone; remove a few
remaining references.  Shows how seldom this stuff gets used.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
mkdorg@users.sourceforge.net 646ce814b4 target: add basic dsp563xx support 2009-12-15 18:38:52 +01:00
Øyvind Harboe d6aff79f1a imx31: move srst delay into config script
reset init/run now works again.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-15 07:55:20 +01:00
David Brownell c86a64dff7 lm3748: use new Stellaris config file
Use the new file, and remove the old target/lm3s3748.cfg one.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:53 -08:00
Yegor Yefremov a1009509fb Common target file for Stellaris chips
Common target.cfg file for LM3S CPU family

[dbrownell@users.sourceforge.net: rename, generalize more]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:31 -08:00
David Brownell ecd709fa55 OMAP2420: define reset-assert event
Behave like OMAP3530:  force global software reset.  Given the
patch to teach ARM11 how to use these events, and use VCR to
catch the reset vector, this works better than either the
current reset logic or than using SRST.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-07 14:57:43 -08:00
David Brownell a65e75ea34 Tcl and doc: update to match new 'arm mcr ...' etc
Make them match the C code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-01 01:10:19 -08:00
Øyvind Harboe 48edd58c39 target: at91eb40a.cfg is a board, not a target.
Also updated to use target name when creating flash
and set jtag_khz to 16000.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-01 10:06:40 +01:00
Marek Vasut 8c2846ed45 create target/pxa3xx.cfg
[dbrownell@users.sourceforge.net; remove pxa255 comment]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-29 12:57:05 -08:00
David Brownell ddce517e3a omap3530.cfg: use new "reset-assert" event
Replaces previous "reset-assert-pre" workaround.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-27 18:50:31 -08:00
David Brownell ac06d41fc7 omap3530.cfg: yes we have SRAM!
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-25 16:19:53 -08:00
Øyvind Harboe 828d006a9d arm926ejs: fix gaffe when converting from arm926ejs cp15 to mcr
the first arg is the register number 15 = cp15.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-23 18:23:10 +01:00
Øyvind Harboe eeb4276deb arm926ejs: retire cp15 commands, handled by mrc/mcr.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-23 14:02:03 +01:00
David Brownell 7b77b3c5d1 target.cfg: TAP id for Hilscher netX 500
Based on email from "Martin Kaul <martin.kaul@leuze.de>".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-20 12:21:00 -08:00
Zachary T Welch 3e1f5e7c64 update 'nand device' usage in scripts
Add $_FLASHNAME variable to update 'nand device' command syntax.
2009-11-19 13:39:41 -08:00
Zachary T Welch 2dfa5e9c84 update 'flash bank' usage in scripts
Sets $_FLASHNAME to "$_CHIPNAME.flash" and passes it as the
first argument to 'flash bank'.
2009-11-19 13:39:41 -08:00
David Brownell f86137066a ARM: "armv4_5" command prefix becomes "arm"
Rename the "armv4_5" command prefix to straight "arm" so it makes
more sense for newer cores.  Add a simple compatibility script.

Make sure all the commands give the same "not an ARM" diagnostic
message (and fail properly) when called against non-ARM targets.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-16 16:36:09 -08:00
David Brownell ecab0cfe25 ARM11: ETM + ETB support
Kick in ETM (and ETB) support for ARM11.  Tested on OMAP 2420,
so update that configuration.  (That's an ARM1136ejs, ETB,
OpenGL ES1.1, C55x DSP, etc.)

Also update the other ARM11 ETM + ETB targets in the tree
to set up these modules.  (Not tested.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-13 16:58:14 -08:00
David Brownell 44d6a531f7 iMX2* + ETB targets: hook up ETM and ETB
ARM9 cores with an ETB will have a matching ETM.
Hook them both up by default.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-13 16:56:11 -08:00
David Brownell 38e8d60f79 target.cfg: label ETBs correctly
Various cores with an ETB have its TAP misnamed ... either as a
boundary scan TAP or as the iMX "Secure JTAG Controller" (which
is, among other things, a JRC that could be used to shorten
scan chains).

Use the correct name for these TAPs, which we can recognize since
their IDs were assigned by ARM and these chips all document the
presence of an ETB.  The 0x2b900f0f is ETB11; the 0x1b900f0f
is an older module, just called "ETB".

Also shrink the ETB's IR configuration; the default IR-Capture
value is fine, and the mask can specify that all four bits are
safe to check (per ARM documentation).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-13 13:44:50 -08:00
David Brownell 6881c1b6d6 target.cfg: (re)move some bogus reset_config lines
General rule, this is all board-specific and doesn't belong
in target config files.  Some of these were just cosmetic.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-10 09:25:26 -08:00
Thomas Kindler 85944d4144 stm32.cfg: remove reset_config
Here's a patch for the double-reset problem on STM32.  I've tested
downloading and debugging with GDB and Eclipse, and everything seems
to work fine.

This effectively sets reset_config to none. trst_only would also
be ok, but that's better left to a board configuration file since
not all boards wire it up.

The NVIC is used to trigger reset, which at least on this chip also
pulses nSRST so the whole system does get rest -- exactly once.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-10 09:16:12 -08:00
Øyvind Harboe c202ba7d34 ARM11: remove old mrc/mcr commands
Switch to new commands in config scripts

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-10 13:13:13 +01:00
Øyvind Harboe 1f357869c1 telo.cfg: fix search paths
Add the missing "target/" prefix for scripts in the
target folder.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-10 13:11:17 +01:00
David Brownell d70d9634bf finish removing deprecated/obsolete commands
It's been about a year since these were deprecated and, in most
cases, removed.  There's no point in carrying that documentation,
or backwards compatibility for "jtag_device" and "jtag_speed",
around forever.  (Or a few remnants of obsolete code...)

Removed a few obsolete uses of "jtag_speed":

 - The Calao stuff hasn't worked since July 2008.  (Those Atmel
   targets need to work with a 32KHz core clock after reset until
   board-specific init-reset code sets up the PLL and enables a
   faster JTAg clock.)
 - Parport speed controls don't actually work (tops out at about
   1 MHz on typical HW).
 - In general, speed controls need to live in board.cfg files (or
   sometimes target.cfg files), not interface.cfg ...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-09 13:16:32 -08:00
David Brownell 3e6f9e8d1e target.cfg: remove "-work-area-virt 0"
The semantics of "-work-area-virt 0" (or phys) changed with
the patch to require specifying physical or virtrual work
area addresses.  Specifying zero was previously a NOP.  Now
it means that address zero is valid.

This patch addresses three related issues:

 - MMU-less processors should never specify work-area-virt;
   remove those specifications.  Such processors include
   ARM7TDMI, Cortex-M3, and ARM966.

 - MMU-equipped processors *can* specify work-area-virt...
   but zero won't be appropriate, except in mischievous
   contexts (which hide null pointer exceptions).

   Remove those specs from those processors too.  If any of
   those mappings is valid, someone will need to submit a
   patch adding it ... along with a comment saying what OS
   provides the mapping, and in which context.  Example,
   say "works with Linux 2.6.30+, in kernel mode".  (Note
   that ARM Linux doesn't map kernel memory to zero ...)

 - Clarify docs on that "-virt" and other work area stuff.

Seems to me work-area-virt is quite problematic; not every
operating system provides such static mappings; if they do,
they're not in every MMU context...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-08 08:52:40 -08:00
Krzysztof Kajstura 2970696e89 JTAG: support KT-LINK adapter
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 21:20:44 -08:00
David Brownell fd108f5737 PXA255: support Intel "Lubbock" platform
Config for Intel's "Lubbock" PXA255 development board.  Even more
so than the PXA255 itself, this is obsolete.  AFAIK this was the
first generally available development platform for PXA255.  Intel
stopped providing these after other devel boards became available.

One interesting thing about this board from the OpenOCD perspective
is probably its flash configuration.  Each bank is 32 bits wide,
built from two 16-bit StrataFlash chips wired in parallel.  This
doubles throughput ... it reads/writes 32 bits in the time a single
chip takes to write just 16 bits.

This conf mostly works, given XScale bugfixes, but has some issues
(notably: no access to the on-board SDRAM) flagged by FIXMEs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 21:11:44 -08:00
Freddie Chopin 2120231afd remove "-ircapture 0x1 -irmask 0x1" from stm32.cfg
Gets rid of the runtime warning "stm32.bs: nonstandard IR mask"

[dbrownell@users.sourceforge.net: line lengths, note issue, section ref]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-01 07:02:23 -08:00