rusefi-1/firmware/init/sensor/init_tps.cpp

#include "global.h"
#include "adc_inputs.h"
#include "adc_subscription.h"
#include "engine.h"
#include "error_handling.h"
#include "functional_sensor.h"
#include "redundant_sensor.h"
#include "proxy_sensor.h"
#include "linear_func.h"
#include "tps.h"

EXTERN_ENGINE;

LinearFunc tpsFunc1p(TPS_TS_CONVERSION);
LinearFunc tpsFunc1s(TPS_TS_CONVERSION);
LinearFunc tpsFunc2p(TPS_TS_CONVERSION);
LinearFunc tpsFunc2s(TPS_TS_CONVERSION);

FunctionalSensor tpsSens1p(SensorType::Tps1Primary, MS2NT(10));
FunctionalSensor tpsSens1s(SensorType::Tps1Secondary, MS2NT(10));
FunctionalSensor tpsSens2p(SensorType::Tps2Primary, MS2NT(10));
FunctionalSensor tpsSens2s(SensorType::Tps2Secondary, MS2NT(10));

RedundantSensor tps1(SensorType::Tps1, SensorType::Tps1Primary, SensorType::Tps1Secondary);
RedundantSensor tps2(SensorType::Tps2, SensorType::Tps2Primary, SensorType::Tps2Secondary);

LinearFunc pedalFuncPrimary;
LinearFunc pedalFuncSecondary;
FunctionalSensor pedalSensorPrimary(SensorType::AcceleratorPedalPrimary, MS2NT(10));
FunctionalSensor pedalSensorSecondary(SensorType::AcceleratorPedalSecondary, MS2NT(10));

RedundantSensor pedal(SensorType::AcceleratorPedal, SensorType::AcceleratorPedalPrimary, SensorType::AcceleratorPedalSecondary);

// This sensor indicates the driver's throttle intent - Pedal if we have one, TPS if not.
ProxySensor driverIntent(SensorType::DriverThrottleIntent);

// These sensors are TPS-like, so handle them in here too
LinearFunc wastegateFunc(PACK_MULT_VOLTAGE);
LinearFunc idlePosFunc(PACK_MULT_VOLTAGE);
FunctionalSensor wastegateSens(SensorType::WastegatePosition, MS2NT(10));
FunctionalSensor idlePosSens(SensorType::IdlePosition, MS2NT(10));

static bool configureTps(LinearFunc& func, adc_channel_e channel, float closed, float open, float min, float max, const char* msg) {
	// Only configure if we have a channel
	if (!isAdcChannelValid(channel)) {
		return false;
	}

	float scaledClosed = closed / func.getDivideInput();
	float scaledOpen = open / func.getDivideInput();

	float split = absF(scaledOpen - scaledClosed);

	// If the voltage for closed vs. open is very near, something is wrong with your calibration
	if (split < 0.5f) {
		firmwareError(OBD_Throttle_Position_Sensor_Circuit_Malfunction, "\"%s\" problem: open %.2f/closed %.2f cal values are too close together. Check your wiring!", msg,
				open,
				closed);
		return false;
	}

	func.configure(
		closed, 0,
		open, 100, 
		min, max
	);

	return true;
}

static bool initTpsFunc(LinearFunc& func, FunctionalSensor& sensor, adc_channel_e channel, float closed, float open, float min, float max) {
	// If the configuration was invalid, don't continue to configure the sensor
	if (!configureTps(func, channel, closed, open, min, max, sensor.getSensorName())) {
		return false;
	}

	sensor.setFunction(func);

	AdcSubscription::SubscribeSensor(sensor, channel, 200);

	return sensor.Register();
}

static void initTpsFuncAndRedund(RedundantSensor& redund, LinearFunc& func, FunctionalSensor& sensor, adc_channel_e channel, float closed, float open, float min, float max) {
	bool hasSecond = initTpsFunc(func, sensor, channel, closed, open, min, max);

	redund.configure(5.0f, !hasSecond);

	redund.Register();
}

void initTps(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
	percent_t min = CONFIG(tpsErrorDetectionTooLow);
	percent_t max = CONFIG(tpsErrorDetectionTooHigh);

	if (!CONFIG(consumeObdSensors)) {
		initTpsFunc(tpsFunc1p, tpsSens1p, CONFIG(tps1_1AdcChannel), CONFIG(tpsMin), CONFIG(tpsMax), min, max);
		initTpsFuncAndRedund(tps1, tpsFunc1s, tpsSens1s, CONFIG(tps1_2AdcChannel), CONFIG(tps1SecondaryMin), CONFIG(tps1SecondaryMax), min, max);
		initTpsFunc(tpsFunc2p, tpsSens2p, CONFIG(tps2_1AdcChannel), CONFIG(tps2Min), CONFIG(tps2Max), min, max);
		initTpsFuncAndRedund(tps2, tpsFunc2s, tpsSens2s, CONFIG(tps2_2AdcChannel), CONFIG(tps2SecondaryMin), CONFIG(tps2SecondaryMax), min, max);
		initTpsFunc(pedalFuncPrimary, pedalSensorPrimary, CONFIG(throttlePedalPositionAdcChannel), CONFIG(throttlePedalUpVoltage), CONFIG(throttlePedalWOTVoltage), min, max);
		initTpsFuncAndRedund(pedal, pedalFuncSecondary, pedalSensorSecondary, CONFIG(throttlePedalPositionSecondAdcChannel), CONFIG(throttlePedalSecondaryUpVoltage), CONFIG(throttlePedalSecondaryWOTVoltage), min, max);

		// TPS-like stuff that isn't actually a TPS
		initTpsFunc(wastegateFunc, wastegateSens, CONFIG(wastegatePositionSensor), CONFIG(wastegatePositionMin), CONFIG(wastegatePositionMax), min, max);
		initTpsFunc(idlePosFunc, idlePosSens, CONFIG(idlePositionSensor), CONFIG(idlePositionMin), CONFIG(idlePositionMax), min, max);
	}

	// Route the pedal or TPS to driverIntent as appropriate
	if (isAdcChannelValid(CONFIG(throttlePedalPositionAdcChannel))) {
		driverIntent.setProxiedSensor(SensorType::AcceleratorPedal);
	} else {
		driverIntent.setProxiedSensor(SensorType::Tps1);
	}

	driverIntent.Register();
}

void reconfigureTps(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
	float min = CONFIG(tpsErrorDetectionTooLow);
	float max = CONFIG(tpsErrorDetectionTooHigh);

	configureTps(tpsFunc1p, CONFIG(tps1_1AdcChannel), CONFIG(tpsMin), CONFIG(tpsMax), min, max, tpsSens1p.getSensorName());
	configureTps(tpsFunc1s, CONFIG(tps1_2AdcChannel), CONFIG(tps1SecondaryMin), CONFIG(tps1SecondaryMax), min, max, tpsSens1s.getSensorName());
	configureTps(tpsFunc2p, CONFIG(tps2_1AdcChannel), CONFIG(tps2Min), CONFIG(tps2Max), min, max, tpsSens2p.getSensorName());
	configureTps(tpsFunc2s, CONFIG(tps2_2AdcChannel), CONFIG(tps2SecondaryMin), CONFIG(tps2SecondaryMax), min, max, tpsSens2s.getSensorName());

	configureTps(pedalFuncPrimary, CONFIG(throttlePedalPositionAdcChannel), CONFIG(throttlePedalUpVoltage), CONFIG(throttlePedalWOTVoltage), min, max, pedalSensorPrimary.getSensorName());
	configureTps(pedalFuncSecondary, CONFIG(throttlePedalPositionSecondAdcChannel), CONFIG(throttlePedalSecondaryUpVoltage), CONFIG(throttlePedalSecondaryWOTVoltage), min, max, pedalSensorSecondary.getSensorName());

	configureTps(wastegateFunc, CONFIG(wastegatePositionSensor), CONFIG(wastegatePositionMin), CONFIG(wastegatePositionMax), min, max, wastegateSens.getSensorName());
	configureTps(idlePosFunc, CONFIG(idlePositionSensor), CONFIG(idlePositionMin), CONFIG(idlePositionMax), min, max, idlePosSens.getSensorName());
}