2017-01-30 20:05:07 -08:00
|
|
|
1) RESOLVED IN R0.2 SOIC24 wrong size
|
|
|
|
|
2) RESOLVED IN R0.2 Q1 MOSFET is not connected properly.
|
|
|
|
|
3) RESOLVED IN R0.3 DIAHD silkscreen on pad #6 should be DIAHG
|
|
|
|
|
4) RESOLVED IN R0.3 add a note describing UR (R8) and UA (R15) low pass filter / slew rate limiter
|
|
|
|
|
5) RESOLVED IN R0.3 Correct C9 should match C2 for 1kHz low pass filter.
|
2017-02-03 20:04:50 -08:00
|
|
|
6) RESOLVED IN R0.3 R12 is not routed right
|
2018-01-29 16:07:21 -08:00
|
|
|
7) voltage divider on UR and UA channels, 5V --> 3V (not clear if we need this on the little board - we can always use external divider)
|
2018-01-29 11:38:58 -08:00
|
|
|
8) Remove R3 (connect ends) and remove C3
|
