MRE test setup

firmware/config/boards/kinetis/config/controllers/algo/auto_generated_enums.cpp

@@ -571,8 +571,8 @@ case Force_4_bytes_size_engine_type:
   return "Force_4_bytes_size_engine_type";
 case GEO_STORM:
   return "GEO_STORM";
-case GM_2_2:
-  return "GM_2_2";
+case MRE_BOARD_TEST:
+  return "MRE_BOARD_TEST";
 case GY6_139QMB:
   return "GY6_139QMB";
 case HONDA_600:

firmware/config/engines/custom_engine.cpp

@@ -418,4 +418,50 @@ void setTle8888TestConfiguration(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
 	engineConfiguration->tpsMax = 799;
 }
 
+/**
+ * set engine_type 30
+ */
+void mreBoardTest(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
+
+	// EFI_ADC_1: "23 - AN temp 2"
+	// test harness: Red/Green, 2K PD. expected 2.0v
+	// iat in microrusefi/board_configuration.cpp
+
+	// EFI_ADC_2: "24 - AN temp 3"
+	// test harness: Blue/White, 2K PD. expected 2.0v
+
+
+	// EFI_ADC_10: "27 - AN volt 1"
+	// test harness: Blue/Red, 3.84K PD / 5.3 PU. expected 1.6v
+	engineConfiguration->mafAdcChannel = EFI_ADC_10;
+
+	// EFI_ADC_14: "32 - AN volt 6"
+	// test harness: Red/White 3.6K PD / 5.2 PU. expected 1.6v
+	engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_14;
+
+
+	// EFI_ADC_4: "28 - AN volt 10"
+	// test harness: Red/Yellow
+	engineConfiguration->afr.hwChannel = EFI_ADC_4;
+
+
+	// EFI_ADC_7: "31 - AN volt 3"
+	// test harness: White/Red
+	engineConfiguration->map.sensor.hwChannel = EFI_ADC_7;
+
+
+	//engineConfiguration->baroSensor.hwChannel
+	//engineConfiguration->oilPressure.hwChannel
+	//engineConfiguration->fuelLevelSensor
+
+	// TPS tps1_1AdcChannel EFI_ADC_13
+
+	engineConfiguration->specs.cylindersCount = 6;
+	engineConfiguration->specs.firingOrder = FO_1_5_3_6_2_4;
+	// fix res boardConfiguration->ignitionPins[4] = GPIOD_6;
+	// fix res boardConfiguration->ignitionPins[5] = GPIOD_7;
+
+
+}
+
 #endif /* CONFIG_ENGINES_CUSTOM_ENGINE_CPP_ */

firmware/config/engines/custom_engine.h

@@ -17,4 +17,6 @@ void setFrankensoBoardTestConfiguration(DECLARE_CONFIG_PARAMETER_SIGNATURE);
 void setEtbTestConfiguration(DECLARE_CONFIG_PARAMETER_SIGNATURE);
 void setTle8888TestConfiguration(DECLARE_CONFIG_PARAMETER_SIGNATURE);
 
+
+void mreBoardTest(DECLARE_CONFIG_PARAMETER_SIGNATURE);
 #endif /* CONFIG_ENGINES_CUSTOM_ENGINE_H_ */

firmware/controllers/algo/auto_generated_enums.cpp

@@ -709,8 +709,8 @@ case Force_4_bytes_size_engine_type:
   return "Force_4_bytes_size_engine_type";
 case GEO_STORM:
   return "GEO_STORM";
-case GM_2_2:
-  return "GM_2_2";
+case MRE_BOARD_TEST:
+  return "MRE_BOARD_TEST";
 case GY6_139QMB:
   return "GY6_139QMB";
 case HONDA_600:

firmware/controllers/algo/engine_configuration.cpp

@@ -1053,10 +1053,12 @@ void resetConfigurationExt(Logging * logger, engine_type_e engineType DECLARE_EN
 	case MRE_MIATA_NA6:
 	case ACURA_RSX:
 	case MINI_COOPER_R50:
-	case GM_2_2:
 	case MINIMAL_PINS:
 		// all basic settings are already set in prepareVoidConfiguration(), no need to set anything here
 		break;
+	case MRE_BOARD_TEST:
+		mreBoardTest(PASS_ENGINE_PARAMETER_SIGNATURE);
+		break;
 #if EFI_SUPPORT_DODGE_NEON
 	case DODGE_NEON_1995:
 		setDefaultFrankensoConfiguration(PASS_ENGINE_PARAMETER_SIGNATURE);

firmware/controllers/algo/rusefi_enums.h

@@ -112,7 +112,7 @@ typedef enum {
 
 	SACHS = 29,
 
-	GM_2_2 = 30,
+	MRE_BOARD_TEST = 30,
 
 	DODGE_RAM = 31,
 

firmware/controllers/engine_controller.cpp

@@ -812,6 +812,6 @@ int getRusEfiVersion(void) {
 	if (initBootloader() != 0)
 		return 123;
 #endif /* EFI_BOOTLOADER_INCLUDE_CODE */
-	return 20190804;
+	return 20190805;
 }
 #endif /* EFI_UNIT_TEST */

firmware/controllers/settings.cpp

@@ -193,8 +193,8 @@ const char* getConfigurationName(engine_type_e engineType) {
 		return "CAMARO_4";
 	case CHEVY_C20_1973:
 		return "CHEVY C20";
-	case GM_2_2:
-	  return "GM_2_2";
+	case MRE_BOARD_TEST:
+	  return "MRE_TEST";
 	case DODGE_RAM:
 		return "DODGE_RAM";
 	default: