auto-sync

hardware/gerbmerge/brain2layer.cfg

@@ -12,7 +12,7 @@ AllowMissingLayers = 0
 searchtimeout = 10
 
 [MergeOutputFiles]
-Prefix = %(projdir)s/merged2
+Prefix = %(projdir)s/merged2layer
 *TopLayer=%(prefix)s/Top.gbr
 *BottomLayer=%(prefix)s/Bottom.gbr
 *TopSilkscreen=%(prefix)s/TopSilk.gbr
@@ -24,16 +24,16 @@ BoardOutline=%(prefix)s/BoardOutline.gbr
 ToolList = %(prefix)s/Tools.drl
 Placement = %(prefix)s/Placement.txt
 
-[aa]
-Prefix=%(projdir)s/aa
-*TopLayer=%(prefix)s/Top.gbr
-*BottomLayer=%(prefix)s/Bottom.gbr
-*TopSilkscreen=%(prefix)s/TopSilk.gbr
-*TopSoldermask=%(prefix)s/TopMask.gbr
-*BottomSilkscreen=%(prefix)s/BottomSilk.gbr
-*BottomSoldermask=%(prefix)s/BottomMask.gbr
-Drills=%(prefix)s/Through.drl
-BoardOutline=%(prefix)s/BoardOutline.gbr
+[brain100]
+Prefix=%(projdir)s/../brain_board/gerber/brain_board_STM32F407_R0.3/brain_board_STM32F407
+*TopLayer=%(prefix)s-F.Cu.gtl
+*BottomLayer=%(prefix)s-B.Cu.gbl
+*TopSilkscreen=%(prefix)s-F.SilkS.gto
+*TopSoldermask=%(prefix)s-F.Mask.gts
+*BottomSilkscreen=%(prefix)s-B.SilkS.gbo
+*BottomSoldermask=%(prefix)s-B.Mask.gbs
+Drills=%(prefix)s_gm.drl
+BoardOutline=%(prefix)s-Edge.Cuts.gm1
 
 Repeat = 10
 

hardware/gerbmerge/ki2gm.py

@@ -0,0 +1,67 @@
+#!/usr/bin/python
+
+# Copyright 2012 by Wayne C. Gramlich
+#
+# ki2gm.py is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# ki2gm.py is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+# 
+# The complete text of the license can be found at:
+#
+#   http://www.gnu.org/licenses/.
+
+# This program takes a KiCAD .drl file and converts it to
+# a .drl file that can be read by the gerbmerge program.
+# The gerbmege program can be found at:
+#
+#   http://ruggedcircuits.com/gerbmerge/
+
+import sys
+
+def main():
+    """ ki2gm: This program takes a KiCAD .drl file an converts it
+        to a .drl file that can be used by gerbmerge. """
+
+    args = sys.argv
+    if len(args) < 3:
+	print "Usage: ki2gm in.drl out.drl"
+    else:
+	# Do argument checking:
+	in_file_name = args[1]
+	out_file_name = args[2]
+	assert in_file_name != out_file_name, \
+	  "Input file '{0}' must be different from output file name {1}". \
+	  format(in_file_name, out_file_name)
+	assert in_file_name.endswith(".drl"), \
+	  "Input file '{0}' must end with .drl suffix".format(in_file_name)
+	assert out_file_name.endswith(".drl"), \
+	  "Output file '{0}' must end with .drl suffix".format(out_file_name)
+
+	# Read in {in_file_name}:
+	in_file = open(in_file_name, "r")
+	lines = in_file.readlines()
+	in_file.close()
+
+	# Create {mappings} table:
+	mappings = {}
+	mappings["G90\n"] = ";G90\n"
+	mappings["G05\n"] = ";G05\n"
+	mappings["FMAT,2\n"] = ";FMAT,2\n"
+	mappings["T0\n"] = ";T0\n"
+
+	# Output the modified .drl file:
+	out_file = open(out_file_name, "w")
+	for line in lines:
+	    # Remap any {line} that needs to be changed:
+	    if line in mappings:
+		line = mappings[line]
+            out_file.write(line)
+	out_file.close()
+
+main()

hardware/gerbmerge/run.bat

@@ -1,4 +1,7 @@
 rd /s /q merged2layer
 mkdir merged2layer
 
+
+c:\Python26\python.exe ki2gm.py ../brain_board/gerber/brain_board_STM32F407_R0.3/brain_board_STM32F407.drl ../brain_board/gerber/brain_board_STM32F407_R0.3/brain_board_STM32F407_gm.drl
+
 c:\Python26\python.exe gerbmerge.py brain2layer.cfg