mirror of https://github.com/rusefi/rusefi-1.git
Auto-generated configs and docs
This commit is contained in:
GitHub build-firmware Action
parent
ee2a013960
commit
0f52622409
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Oct 08 18:13:47 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Oct 09 06:07:32 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -915,7 +915,8 @@ struct engine_configuration_s {
|
|||
angle_t fixedModeTiming;
|
||||
/**
|
||||
* Angle between Top Dead Center (TDC) and the first trigger event.
|
||||
* Knowing this angle allows us to control timing and other angles in reference to TDC.
|
||||
* Positive value in case of synchnization point before TDC and negative in case of synchnization point after TDC
|
||||
* .Knowing this angle allows us to control timing and other angles in reference to TDC.
|
||||
* set global_trigger_offset_angle X
|
||||
* offset 456
|
||||
*/
|
||||
|
|
@ -3728,4 +3729,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Oct 08 18:13:47 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Oct 09 06:07:32 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1170,8 +1170,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD hellen_cypress
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 2806093340
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3919991069
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1490,7 +1490,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator false
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.hellen_cypress.2806093340"
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.hellen_cypress.3919991069"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Oct 08 18:13:46 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Oct 09 06:07:30 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -915,7 +915,8 @@ struct engine_configuration_s {
|
|||
angle_t fixedModeTiming;
|
||||
/**
|
||||
* Angle between Top Dead Center (TDC) and the first trigger event.
|
||||
* Knowing this angle allows us to control timing and other angles in reference to TDC.
|
||||
* Positive value in case of synchnization point before TDC and negative in case of synchnization point after TDC
|
||||
* .Knowing this angle allows us to control timing and other angles in reference to TDC.
|
||||
* set global_trigger_offset_angle X
|
||||
* offset 456
|
||||
*/
|
||||
|
|
@ -3728,4 +3729,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Oct 08 18:13:46 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Oct 09 06:07:30 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1170,8 +1170,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD kin
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 4133334246
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3099225063
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1490,7 +1490,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator true
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.kin.4133334246"
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.kin.3099225063"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -915,7 +915,8 @@ struct engine_configuration_s {
|
|||
angle_t fixedModeTiming;
|
||||
/**
|
||||
* Angle between Top Dead Center (TDC) and the first trigger event.
|
||||
* Knowing this angle allows us to control timing and other angles in reference to TDC.
|
||||
* Positive value in case of synchnization point before TDC and negative in case of synchnization point after TDC
|
||||
* .Knowing this angle allows us to control timing and other angles in reference to TDC.
|
||||
* set global_trigger_offset_angle X
|
||||
* offset 456
|
||||
*/
|
||||
|
|
@ -3728,4 +3729,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
FSIO_SETTING_FANONTEMPERATURE = 1000,
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
case FSIO_SETTING_FANONTEMPERATURE:
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
static LENameOrdinalPair lefanOnTemperature(FSIO_SETTING_FANONTEMPERATURE, "cfg_fanOnTemperature");
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
case FSIO_SETTING_FANONTEMPERATURE:
|
||||
|
|
|
|||
|
|
@ -1170,8 +1170,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD all
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 495359842
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 1398886499
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1490,7 +1490,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator false
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.all.495359842"
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.all.1398886499"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD all
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 495359842
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.all.495359842"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 1398886499
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.all.1398886499"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD frankenso_na6
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 3122524505
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.frankenso_na6.3122524505"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 4110038616
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.frankenso_na6.4110038616"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD hellen_cypress
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 2806093340
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.hellen_cypress.2806093340"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3919991069
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.hellen_cypress.3919991069"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD kin
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 4133334246
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.kin.4133334246"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3099225063
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.kin.3099225063"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD mre_f4
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 3940378869
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.mre_f4.3940378869"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 2755309556
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.mre_f4.2755309556"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD mre_f7
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 3940378869
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.mre_f7.3940378869"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 2755309556
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.mre_f7.2755309556"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD prometheus_405
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 2829680145
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.prometheus_405.2829680145"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3863918864
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.prometheus_405.3863918864"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD prometheus_469
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 2829680145
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.prometheus_469.2829680145"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3863918864
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.prometheus_469.3863918864"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD proteus_f4
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 2784173624
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.proteus_f4.2784173624"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3944012089
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.proteus_f4.3944012089"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD proteus_f7
|
||||
#define SIGNATURE_DATE 2020.10.08
|
||||
#define SIGNATURE_HASH 2784173624
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.08.proteus_f7.2784173624"
|
||||
#define SIGNATURE_DATE 2020.10.09
|
||||
#define SIGNATURE_HASH 3944012089
|
||||
#define TS_SIGNATURE "rusEFI 2020.10.09.proteus_f7.3944012089"
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.all.495359842"
|
||||
signature = "rusEFI 2020.10.09.all.1398886499"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.all.495359842" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.all.1398886499" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.frankenso_na6.3122524505"
|
||||
signature = "rusEFI 2020.10.09.frankenso_na6.4110038616"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.frankenso_na6.3122524505" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.frankenso_na6.4110038616" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:39 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:22 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.hellen_cypress.2806093340"
|
||||
signature = "rusEFI 2020.10.09.hellen_cypress.3919991069"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.hellen_cypress.2806093340" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.hellen_cypress.3919991069" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Oct 08 18:13:47 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Oct 09 06:07:32 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.kin.4133334246"
|
||||
signature = "rusEFI 2020.10.09.kin.3099225063"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.kin.4133334246" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.kin.3099225063" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Oct 08 18:13:46 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Oct 09 06:07:30 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.mre_f4.3940378869"
|
||||
signature = "rusEFI 2020.10.09.mre_f4.2755309556"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.mre_f4.3940378869" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.mre_f4.2755309556" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:38 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:21 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.mre_f7.3940378869"
|
||||
signature = "rusEFI 2020.10.09.mre_f7.2755309556"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.mre_f7.3940378869" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.mre_f7.2755309556" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:34 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:18 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.prometheus_405.2829680145"
|
||||
signature = "rusEFI 2020.10.09.prometheus_405.3863918864"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.prometheus_405.2829680145" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.prometheus_405.3863918864" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:42 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:25 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.prometheus_469.2829680145"
|
||||
signature = "rusEFI 2020.10.09.prometheus_469.3863918864"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.prometheus_469.2829680145" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.prometheus_469.3863918864" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:41 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:24 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.proteus_f4.2784173624"
|
||||
signature = "rusEFI 2020.10.09.proteus_f4.3944012089"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.proteus_f4.2784173624" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.proteus_f4.3944012089" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:44 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:29 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.10.08.proteus_f7.2784173624"
|
||||
signature = "rusEFI 2020.10.09.proteus_f7.3944012089"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.10.08.proteus_f7.2784173624" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.10.09.proteus_f7.3944012089" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:43 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:27 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1260,7 +1260,7 @@ page = 1
|
|||
ignitionOffset = "this value could be used to offset the whole ignition timing table by a constant"
|
||||
timingMode = "Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing)."
|
||||
fixedModeTiming = "This value is the ignition timing used when in 'fixed timing' mode, i.e. constant timing\nThis mode is useful when adjusting distributor location."
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
globalTriggerAngleOffset = "Angle between Top Dead Center (TDC) and the first trigger event.\nPositive value in case of synchnization point before TDC and negative in case of synchnization point after TDC\n.Knowing this angle allows us to control timing and other angles in reference to TDC.\nset global_trigger_offset_angle X"
|
||||
analogInputDividerCoefficient = "Ratio/coefficient of input voltage dividers on your PCB. For example, use '2' if your board divides 5v into 2.5v. Use '1.66' if your board divides 5v into 3v."
|
||||
vbattDividerCoeff = "This is the ratio of the resistors for the battery voltage, measure the voltage at the battery and then adjust this number until the gauge matches the reading."
|
||||
fanOnTemperature = "Cooling fan turn-on temperature threshold, in Celsius"
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Oct 08 18:13:28 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Oct 09 06:07:11 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
|
@ -1127,7 +1127,7 @@ public class Fields {
|
|||
public static final int servoOutputPins8_offset = 3147;
|
||||
public static final int showHumanReadableWarning_offset = 976;
|
||||
public static final int showSdCardWarning_offset = 76;
|
||||
public static final int SIGNATURE_HASH = 495359842;
|
||||
public static final int SIGNATURE_HASH = 1398886499;
|
||||
public static final int silentTriggerError_offset = 1464;
|
||||
public static final int slowAdcAlpha_offset = 2088;
|
||||
public static final int sparkDwellRpmBins_offset = 332;
|
||||
|
|
@ -1396,7 +1396,7 @@ public class Fields {
|
|||
public static final char TS_SD_R_COMMAND = 'r';
|
||||
public static final char TS_SD_W_COMMAND = 'w';
|
||||
public static final char TS_SET_LOGGER_SWITCH = 'l';
|
||||
public static final String TS_SIGNATURE = "rusEFI 2020.10.08.all.495359842";
|
||||
public static final String TS_SIGNATURE = "rusEFI 2020.10.09.all.1398886499";
|
||||
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
|
||||
public static final int TT_TT_60_2_VW = 20;
|
||||
public static final int TT_TT_ONE = 18;
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
<roms>
|
||||
|
||||
<!-- was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh Thu Oct 08 18:13:30 UTC 2020 -->
|
||||
<!-- was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh Fri Oct 09 06:07:13 UTC 2020 -->
|
||||
|
||||
<rom>
|
||||
<romid>
|
||||
|
|
|
|||
Loading…
Reference in New Issue